WIRING SCHEMATIC
REAR VIEW OF MODULE
Optional
programming
port
Jumpers for second outputs
(Starter, Ignition, Accessories)
Data Port (Optional)
INV-200 CONNECTOR
(Door Lock pulse
inverter)
Accessories 2 Jumper
Data Port (Optional)
Ignition 2 Jumper
Optional
programming
port
Starter 2 Jumper
OOOOO
(Optional on certain models)
+2 VOLT L.E.D.
PUSH-BUTTON
VALET SWITCH
(Optional on
certain models)
SIDE VIEW OF MODULE
Programming
Assistance Button
(Hood Switch
Interrupt)
INV-200 Connector
Warning: Use pliers when removing the
L.E.D. connector, do not pull out the cord
as you could tear off the wires from the
connector, leaving the latter inside the
module.
OO
L.E.D PLUG-IN
CONNECTOR
L.E.D.
(Optional)
Optional Starter Kill Relay
N/A 87
TACH Threshold: HIGH
TACH Threshold: NORMAL
STARTER WIRE 87A
(Solenoid Side)
IGNITION (+) 85
STARTER WIRE 30
(Key Side)
86
YELLOW ........... IGNITION
Start Kill Output (-)
RED ..............12V (Battery)
30 A Fuse
ORANGE ...ACCESSORIES
(Heater Blower Motor)
PURPLE............. STARTER
GREEN ............ 5th RELAY
RED ............+12V (Battery)
30 A Fuse
1- BLACK ........................ GROUND (-)
2- PURPLE........................... TACH (AC)
3- GREY ................. HOOD SWITCH (-)
4- ORANGE ........ BRAKE SWITCH (+)
5- YELLOW ....... PARKING LIGHTS (+)
15 A Fuse
12- YELLOW ..........................
11- GREY ...............................
10- WHITE ..............................
9- PURPLE ............................
8- ORANGE ...........................
7- WHITE/ORANGE ...............
6- BLUE/WHITE .....................
5- WHITE/GREEN ..................
4- WHITE/BROWN .................
3- GREEN ..............................
2- BROWN .............................
1- BLUE .................................
(+) Glow plug input
(-) N/A
(-) GROUND when running
(-) EXT. TRIGGER input
(-) Neg. Parking Lights
(-) Starter kill output
(-) AUX 1 Output
(-) DISARM
(-) REARM
(-) UNLOCK
(-) LOCK
(-) TRUNK
September 19, 2005
Download PDF
Similar pages