Breakthrough 6 manual final.cdr

1. Good room ventilation should be ensured because a too dry or too wet environment
will fasten the aging of the leather.
It is a natural movement sound to hear the motor sounds while is use.
The massage functions are: Comfort, Ease, Ache Relieve, Demo (fast experience), Relax,
Music Sync, Waist Stretch, Full Air Pressure and other specific massage functions.
The chair can be set with 2 kinds of memory massage functions: M1 and M2 buttons are the
saved massages.
The Upper-body massage has 3 massage positions of: Overall, Partial and Fixed position.
There are 6 different massage methods of: Shoulder Grasping, Kneading, Tapping,
combination of Kneading & Tapping, Shiatsu, and 3D with 5 massage speeds available. Under
the Tapping and the Shiatsu massage status, the width of the massage hands can be adjusted
5 levels.
The Arm air massage and Upper Arm air massage function have 3 intensity adjustments.
The Lower-body air pressure massage function, Back air pressure massage function, Buttock
air pressure massage, and Calf Rest air pressure have 3 intensity adjustments.
push into the arm for your hand and arm device to automatically reset.
The chairs Back Heating function uses carbon fiber as an infrared heating source.
The chair has a MP3 player function with 3-D digital audio built into the upper arms.
There are 8 natural energy magnets placed in the calf airbags.
Innovative negative oxygen ionizer design on head/upper arm section can emit negative
oxygen ions.
There are 8 natural energy magnetics in the calf airbags.
Magnet therapy can lower cholesterol, eliminate free radical accumulation in the body
and enhance human imunity.
With 3D digital audio equipment on each side of the upper armrest and the ability to connect
with a cell phone or tablet, you can enjoy the perfect fusion of music and massage while
relaxing.
F3 Auto: Ache Relieve
F2: Auto: Fatigue Recovery
F0 Auto:Demo
F1: Auto: Comfort
F5: Auto: Full Air
F6: Auto: Waist Stretch
F5: Auto: Full Air
F7: Auto:
Synchronous Music
F8: Auto: Relax
Heater
Adjust Shoulder
Position
Up/Down
On/Off
Backrest Up
Footrest Up
Zero-Gravity Position
Adjust Back
Massage
Intensity
Up/Down
Add Time
Footrest Down
Backrest Down
Shoulder Grasp
Knead
Knead & Tap
Tap
Speed
Shaitsu
3D
Width
Back Stretch
UP / Down
Lower Body
Program Memory
M1
Sole Roller
Intensity
Arm Air
Massage
Arthrosis
Traction
Program Memory
M2
recline back.
Press an auto massage button; the massage hands proceed with an auto detection
of your shoulders and a body scan.
Characterization of Automatic Massages
Fast experience using all the massage functions.
Depth massage on acupressure point to relax aching area.
Works the Waist, Arms, Shoulders, and Leg air bags at the
same time, relaxing the whole body.
The calf air bag squeezes the calf part and pulls down while the
backrest reclines to stretch the waist. It then returns to the original
position and repeats the above actions. This relieves waist fatigue
and helps you bounce back.
Confirm selection: If the current APP mode is invalid and you
press the confirm button; the horn sound will remind you it's an
invalid selection.
Shoulder grasp: the speed and intensity are adjustable.
Kneading: the speed and intensity are adjustable
Tapping: split into 2 massage modes the speed, width, and
intensity are adjustable
Kneading & Tapping: the speed and intensity are adjustable
Shiatsu: split into 2 massage modes the speed, width, and
intensity are adjustable.
3D: split into 4 massage modes the speed and intensity are
adjustable.
During fixed or partial position massage mode,
the massage hands can adjust downward.
During fixed or partial position massage mode,
the massage hands can adjust upward.
ARTHROSIS
TRACTION
Under lower body air compression mode or Calf air compression
mode this button switches on/off the Calf Rest Stretch function.
Arm Air
Pressure
Back Infared heating therapy: you will feel warmth after
3 minutes.
Zero Gravity Mode
Press power button during massage to stop all massage functions immediately or
when one setting massage program finishes. The backrest and footrest won't return
to their original position yet and the remote controller will display: SA & Memory will
twinkle.
Install the program supplied by agent or download from the network provided by agent.
First go into startup interface after you start up the program. After 5 seconds into the massage
information interface, click the power on/off button on the display interface to start the massage
function. The massage chair will lie back automatically.
A depth massage on acupressure points that relaxes aching areas
Relaxes the whole body by working the Neck, Shoulder,
Waist, Buttocks, Arms, and Leg air bags at the same time.
Improves body fatigue state and recovers body activity
The calf rest air bags squeeze your calves and pulls them down while the backrest
slowly reclines to stretch the waist part. It then returns to the original position and
repeats the above actions, while the seat air bags and massage hands work together.
Shoulder grasp: will automatically turn on shoulder grasp massage.
Speed and intensity are adjustable
Kneading: the speed and intensity are adjustable
TAP
Tapping: split into 2 massage modes, the speed, width, and intensity
are adjustable
Kneading & Tapping: the speed and intensity are adjustable
KNEAD AND TAP
Shiatsu: split into 2 massage modes, the speed width and intensity are adjustable
3D: split into 4 massage modes, the speed and intensity are adjustable
In the startup state of the lower-body, waist
and buttocks, you can adjust the air compression
intensity of the feet with 3 grades available.
You will have a warm sensation 3 minutes after
you switch it on.
Switch the Sole Roller massage function on/off
There are 3 modes for automatically lying down, adjust between each mode
by pressing the Zero Gravity Button
Click “
” icon into setting function interface, then click “
” icon for
popup language list box, select the language type. The systems comes with 3
languages (simplified Chinese, traditional Chinese, and English).
Download PDF
Similar pages