Inductive Proximity Switch
non-flush
Housing O 8 x 8 mm
IO030NK50VB8
Part Number
Technical Data
Inductive Data
Switching Distance
3 mm
Correction Factors V2A / Brass / Al
0.82/0.54/0.48
Mounting
non-flush
Flush mountable in Aluminum
yes
Switching Hysteresis
< 15 %
Electrical Data
Supply Voltage
10...30 V DC
Current Consumption (Ub = 24V)
< 6 mA
Switching Frequency
1 kHz
Temperature Drift
< 10 %
Temperature Range
-25...80 °C
Switching Output Voltage Drop
< 2.5 V
Switching Output/Switching Current
100 mA
Residual Current Switching Output
< 100 µA
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Overload Protection
yes
Plastic
Full Encapsulation
yes
Protection Mode
IP 67
Connection
M 8x1
Protective Insulation, Rated Voltage
50 V
1 = Switching Status Indicator
All dimensions in mm (1 mm = 0.03937 Inch)
Part Number
Housing
50 V
IO030NK50VB8
Mechanical Data
PNP NO
Connection Diagram No.
102
Suitable Plug No.
102
Legend
Power supply "+"
Power supply "0V"
Power supply (AC Voltage)
Switching output (1,2,3...) / NO
Switching output (1,2,3...) / NC
Contamination / Error output (NO)
Contamination / Error output (NC)
Input (analog or digital)
Teach input
Time delay (activation)
Shielding
RS-232 receive path
RS-232 send path
Test input
Trigger input
Analog output (1,2,3,...)
Ground for the analog output
Block discharge
Valve output
Valve control output "+"
Valve control output "0V"
Synchronization
Receiver-Line
Emitter-Line
Grounding
Wire colors according to
DIN IEC 757
black
brown
red
orange
yellow
green
blue
violet
grey
white
pink
green yellow
Specifications are subject to change without notice
51/02
sensors for your success
www.wenglor.com
sensors for your success www.wenglor.com
Download PDF
Similar pages