LED SPOT HEAD - BSL Lighting

LED SPOT HEAD
USERS GUIDE
1. Product Introduction:
1.1 Before unpack the fixture, pls make sure that the packing is in good condition, following items will be found in the
box:
-The fixture
-This users guide
-3m DMX cable
-1.5m power cable with powercon
-Omega bracket for hanging installation
-Safety chain
1.2 Specification
Source
 Light source: LumiEngin COB-2-1600M-W
 Led life: 60.000 hours
 Luminous Flux: 8450lumen, 22460lux@2.5m
 Control: Remote on/off via DMX
 Ballast: switching mode power supply
Optical System
 Beam angle: 13°
X/Y
 Pan: 630(4.0 sec) or 540°(3.58 sec), Tilt: 265° (2.8 sec)
 16-bit resolution
 Auto repositioning
Colors
 8+open, interchangeable, indexable and bidirectional rainbow effect
 New color bounce effect
Gobos
 Outside ¢27mm, inside ¢22mm
 7+ open custom interchangeable position for rotating gobo wheel
 7+ open fixed gobos
 Real indexable and gobo shaking
 Distinctive gobo animation effect
Features
 DMX channels: 21/24/14/16
 Color wheel: 8+1 colors
 Fixed gobo wheel: 7+1 gobos
 Rotating gobo wheel: 7+1 gobos
 Motorized and auto focus
 Full range 0-100% dimmer
 Various strobe
 Rotating Effect wheel with 3 facets,8 facets prism and frost
 Iris
 RDM function to change DMX address, display flip, X/Y Reverse and so on
 Software upgrade via DMX
 Hibernation when lost DMX for preset time
 Indicate temperature info of base, arm and lamp
1
 Fan speed auto change according to temperature
Display
 2.4inch super nice LCD display with friendly English/ Chinese/French/Spanish menu
 Auto lock
 Flip
 Back-up communicating IC
1.3 Description of the Device
1
1.
2.
3.
4.
5.
6.
7.
8.
Project lens
Head
Arm
Base
Display
Foot stand
Operation button
Handle
2
3
4
5
8
6
7
9. Wireless indicator
10. Mic
11. Left button
12. Battery indicator
13. Up button
14. Down button
15. Enter button
16. Right button
17. 3-pin DMX in
18. 3-pin DMX out
19. Powercon in
20. Powercon out
21. Fuse
22. Power switch
16
9 10 11 12 13 15
14
17 18 19 20 21 22
2
1.4 Colors and Gobos
1
2
Open
Megenta
3
Orange
4
Sky blue
5
Pink
6
Yellow
7
Green
8
Blue
9
Red
Static gobo wheel
Rotating gobo wheel (slot-in-out gobos)
3
2. Safety and maintenance Information
2.1 Safety Info
Before operate this unit, please carefully read this users guide and keep if needed in future. It’s
necessary to respect following rules.
The disposal of the device after lifecycle could damage the environment, need to take it to special
company for recycling or return to authorized dealer.
--0.5m
The products referred to in this manual conform to the European Community Directives and are
therefore marked with CE logo.
Keep this device away from children and unauthorized users, the manufacturer will not take
responsibility for the damage due to any disregard of the information provided in this manual and
wrong operation.
Before operate the device, pls make sure the fixture is in good housing, ensure pan and tilt can
rotate in its complete range.
Pls make sure minimal 0.5m distance need to kept between the fixture to any flammable material.
The device can only run with 100-240v voltage, 50/60Hz power, don’t connect to any other wrong
power. Disconnect the device from main power before open the shield or maintenance.
The device is designed only for indoor usage, pls keep it away from moisture. Do not expose the
device under the sun or directly to any other lighting source.
Never look directly into the projecting lens when the fixture is power on, the light may trigger
epileptic seizures in photosensitive persons or persons with epilepsy. Especially at beam effect,
extreme caution and observance of these safety instructions is mandatory.
Don’t put or install the device on a surface that subject to vibration or bumps.
Ta=45℃
The device is supposed to work in the temperate range -15° C and +45° C, do not use the device
when the temperate exceed this range.
The lens, shield need to be replaced when obviously broken, never use the device when the shield is
not completed closed.
Safety I class device, need to be earth connected.
When the fixture is hanged overhead, the safety rope must be fixed to the bottom of the device to
the appropriate fixing point.
Always carry the device by the handles, do not take the head or arm directly for transportation.
2.2 Maintenance
2.2.1 Operation only allowed to qualified person, damages due to unprofessional operation or remove of any parts
inside will not be considered in warranty service. There are no serviceable parts inside the device or package, service
only leaves to authorized dealers.
2.2.3 Never allow the optical components contact with oil, fat or any other liquid.
2.2.4 A regular clearance of the device is needed for long-term usage, this is very helpful to maintain the lifetime and
brightness need to use a soft and lint-free cloth to clean the optical system, fan and air flowing tunnel.
4
2.2.5. Trouble Shooting
Problems
Device not power up
Pan/Tilt error or vibrate
LED off
Device not response to DMX
Possible reasons
Powercon or power cable damaged
Faulty power supply
Faulty Pan/Tilt PCB
Faulty opto sensor
Cable loosen
Temperature protection
Fan not working
Faulty LED
Dimmer and strobe set at 0
Faulty power supply
Faulty communication IC
Faulty display PCB
Wrong DMX addressing
Faulty DMX cable
Checking or solutions
Change a good power cable to try
Replace new power supply
Replace PT001 PCB
Replace opto sensor OP001
Check the cable connect to OP001
Check the temperature from menu
Check the fan speed info from menu
Replace new LED
Set dimmer and strobe channel at 255
Replace new power supply
Replace the IC with back-up one in the display PCB
Replace new display PCB
Check the address and setting
Change to a good DMX cable
2.2.6 Replacement of the fuse
Need to replace with same type and rating, which originally installed in the device.
Step One: Unplug power cable from main power.
Step Two: Unscrew the fuse holder out of the housing with a screwdriver.
Step Three: Remove the broken fuse and replace with an exact same type of new fuse.
Step Four: Insert the fuse holder back to the housing and screw tight and reconnect power.
3. Installation
3.1 The device could be either put on a solid and
even Surface, or mounted upside down or sideways
like left picture.
3.2 The mounting place must be sufficient stable
and be able to support a weight of 10 times of the
unit’s weight. When the fixture is hanged, always
additionally secure the device with the safety chain,
fasten the safety rope at a suitable position so that
the maximum fall of the projector will be 20 cm
5
3.3 How to do mounting installation.
Step one: Installation the clamp onto the omega bracket;
Step two: Install the clamp and bracket on the bottom of panel, fasten the quick-locks;
Step three: Install the whole device onto appropriate truss and fasten the clamps, tight the safety rope with the truss or
other fixing point at a suitable position that drop down distance not exceed 20 cm.
4. Control menu
4.1 Meaning of the icon in menu
CONNECT
LIGHT
INFOMATION
SET
PROGRAM
INFORMATION
LIGHT
CONNECT
4.2 Menu tree
Default setting shadowed. Mark with ①can be basic reloaded, ② be program reloaded, ③can be private reloaded.
DMX Address①
XXX
DMX address setting
Wireless①
Wireless Enabled
Max Temperature①
80~139℃, 80℃/176~282℉, 176℉
Lamp Adjust①
PAN……
Time Info.
Temperature
Fans Speed
Channel Value
Current
XXXX(Hours)
Fixture Life XXXX(Hours)
Near Lamp Temp (depends on fixture)
Near Lamp Fan (depends on fixture)
PAN……
Error Message
Pan,Tilt……
6
Lamp off if
temperature
continuously over for 5
minutes
Adjust value of each
channels
Fixture boot time
Fixture total run time
Temperature Sensors
Fan speed Sensors
Display value of
channel
Error channels
Fixture Model
xxxxxxxxxxxx
Software Ver
1U01 V1.0.00
:
Reset
All
Pan&Tilt
Colors
Gobos
Others
Pan Reverse①
Tilt Reverse①
Pan Degree①
Encoders①
Pan/Tilt Mode①
Mic Sens. ③
No Signal①
Temperature. C/F①
Fans Mode①
Hibernation①
Backlight①
Flip Display①
Display Bright③
Brand Show①
Key Lock①
Language①
Movement
SET
UI Set
Users
Display model brand
and model
Version of each IC
ON/OFF
ON/OFF
630/540
ON/OFF
Stand/Smooth
0~99%,60%
Close/Hold/Auto/Music
Fahrenheit/Celsius
Auto Speed /High Speed
OFF, 01M~99M,15M
02~60m 02m
ON/OFF
00~31 10
ON/OFF
ON/OFF
En/简/繁/Fr/Sp
User Mode①
Standard
Extended
Basic-8bit
Basic-16bit
User
Max Channel = XX
PAN = CH01
Edit User③
Reset all
Reset Pan&Tilt
Reset Colors
Reset Gobos
Reset Others
Pan Reverse
Tilt Reverse
Choose Pan Degree
Encoder wheel on/off
Choose pan/tilt mode
Sensitivity of Mic
Mode when no signal
Temperature at ℃/℉
Fans mode
Sleeping mode
Show backlight time
Display 180°reverse
Display Brightness
Show brand or not
Key lock on/off
Language Select
Standard mode
Extended mode
Basic mode-8bit
Basic mode-16bit
User program mode
Edit users mode
:
Calibration③
Fixture ID③
Wireless Set①
Reload Default
-PasswordColor
=XXX
=XXX
:
:
Password: 050
Calibrate channel value
Name
-PasswordPID Code
DMX On Cable
Reset Connect
ON/OFF
ON/OFF
Name
Password: 050
Set PID of RDM
DMX Send Out
Reset Connect
Basic Reload(①)
Program Reload(②)
---Password--Private Reload(③)
All Reload
ON/OFF
ON/OFF
XXX
ON/OFF
ON/OFF
Basic Reload
Program Reload
Password: 050
Private Reload
All Reload
7
Play①
PROGRAM
Select Chase②
Edit Chase②
DMX Receive
Slave Receive
Sequence
Music
Chase Part 1
Chase Part 2
Chase Part 3
Chase 1
:
Chase 8
Edit Scenes②
Edit Scene 001
~ Edit Scene
250
Scenes Record
ScXX=>ScXX
Slave Receive 1,2,3
Master / Alone
Master / Alone
Chase 1 ~ 8 Chase 1
Chase 1 ~ 8 Chase 2
Chase 1 ~ 8 Chase 3
Chase Test
Step 01
=SCxxx
Step 64
=SCxxx
=xxx
Pan,Tilt,……
--Fade Time-=xxx
--Secne Time-- =xxx
DMX Input
DMX Receive
Choose slave position
Run Sequence
Music mode
Select and run auto
program
Test
Beginning scene
Ending scene
Input manual scene
Modify manually fading
time
Modify manually scene
time
Input scene from
exterior controller
Auto Input scenes
5. DMX connection and DMX protocol
5.1 DMX addressing:
5.1.1 The device is controlled by universal DMX 512 protocol, DMX address is the start channel used to receive
instructions from the external controller. For independent control, each fixture must be assigned its unique address
control channels. For example, this device has four channel modes: 21/24/14/16, if we set the mode at standard 21
channels mode, and there are several models need to be independently controlled, we just simply address first fixture
at 1, and second fixture at 22, third one at 43, etc.
If the devices have the same address, they will behave synchronically.
DMX addressing is limited, don’t set the address so high that without enough control channels for the fixtures.
Display is flashing when no DMX signal is received.
5.1.2 This device is equipped with 3-pins DMX in and out sockets only.
Pin 1 = GND
Pin 2 = Signal (-)
Pin 3 = Signal (+)
5.1.3 The termination is prepared by soldering a 120Ω resistor between pins 2 and 3.
8
5.1.4 Connection: us DMX cable with 3-pin XLR-plugs to connect the controller with the fixture or one fixture with
another.
5.2 DMX chart
St
1
2
3
Channel
name
Ex Ba1 Ba2
1
1
1 Pan
2
2 Pan fine
3
2
3 Tilt
4
4 Tilt fine
Movment
5
3
5
Speed
6
Min
DMX
0
0
0
0
Max
DMX
255
255
255
255
fastest to Slowest
0
255
Normal
0
16
32
0
16
32
48
64
15
31
255
15
31
47
63
255
0
32
224
31
223
255
0
32
224
31
223
255
0
32
224
31
223
255
0
31
function
Pan Coarse
Pan Fine
Tilt Coarse
Tilt Fine
Movement
Movement With Blackout
Function
TBD
Normal Shutter Functions
4
7
Shutter
Function
Pulse-effect Forward
Pulse-effect Reverse
Random Strobe
TBD
Normal Shutter Functions
Close
Strobe Rate (slow to fast)
Open
Pulse-effect Forward
Close
5
8
Shutter
Strobe Rate (slow to fast)
Open
Pulse-effect Reverse
Close
Strobe Rate (slow to fast)
Open
Random Strobe
Close
9
Strobe Rate (slow to fast)
Open
Shutter closed
No function (shutter open)
Strobe effect slow to fast
4
6
Shutter
No function (shutter open)
Pulse-effect in sequences
No function (shutter open)
Random strobe effect slow to fast
No function (shutter open)
6
9
5
7
Dimmer
Dimmer(Close to Open)
Indexed
Indexed With Blackout
7
Color
Function
10
Forward Spin
Reverse Spin
Continuous
Color Bounce
TBD
32
224
0
32
64
96
128
160
192
224
0
0
16
32
48
64
80
112
223
255
31
63
95
127
159
191
223
255
255
15
31
47
63
79
111
255
0
14
13
255
0
255
0
255
0
255
0
3
2
53
54
57
56
106
107
120
119
223
224
239
240
0
16
32
48
64
80
255
15
31
47
63
79
95
Indexed & Indexed With BlackOut &Color Bounce
Position 1 (Open)
Position 2 ~ Position 18
Forward Spin
8
11
Color
Stop to fastest
Reverse Spin
Stop to fastest
Continuous
Positioning from 0-360 degrees
Indexed
Position 1 (Open)
Position 2 ~ Position 18
Indexed With Blackout
Position 1 (Open)
Position 2 ~ Position 18
6
8
Color
Indexed With Bounce
Position 1
Position 2 ~ Position 9
Forward Wheel Spin
Stop to fastest
Reverse Wheel Spin
Stop to fastest
Indexed
Indexed With Blackout
9
12
Rot Gobo
Function
Forward Spin
Reverse Spin
Continuous
Shake
10
TBD
96
255
0
32
31
255
0
255
0
255
0
255
0
6
5
47
48
54
53
97
98
116
115
223
224
239
240
0
16
32
48
64
80
96
112
255
15
31
47
63
79
95
111
255
0
255
0
255
0
255
0
255
0
255
0
191
Indexed & Indexed With Blackout&Shake
Position 1 (Open)
Position 2 ~ Position 8
Forward Wheel Spin
10 13
Rot Gobo
Stop to fastest
Reverse Wheel Spin
Stop to fastest
Continuous
Positioning from 0-360 degrees
Indexed
Position 1 (Open)
Position 2 ~ Position 8
Indexed With Blackout
Position 1 (Open)
Position 2 ~ Position 8
7
9
Rot Gobo
Indexed With Shake
Position 2
Position 3 ~ Position 8
Forward Wheel Spin
Stop to fastest
Reverse Wheel Spin
Stop to fastest
Continuous
Forward Spin
Reverse Spin
Gobo Rot
Function
11 14
Forward Animate Rotate
Forward Animate Rotate With Blackout
Reverse Animate Rotate
Reverse Animate Rotate With Blackout
TBD
Continuous
Positioning from 0-360 degrees
Forward Spin
Stop to fastest
Reverse Spin
12 15
Gobo Rot
Stop to fastest
Forward Animate Rotate & Forward Animate Rotate With
Blackout
Stop to fastest
Reverse Animate Rotate & Reverse Animate Rotate With
Blackout
Stop to fastest
Continuous
8
10
Gobo Rot
Positioning from 0-360 degrees
Forward Animate Rotate
11
Stop to fastest
192
207
208
223
224
239
240
0
16
32
48
64
80
96
255
15
31
47
63
79
95
255
0
32
31
255
0
255
0
255
0
255
0
6
5
47
48
54
53
97
98
116
115
223
224
239
240
255
0
64
128
192
63
127
191
255
0
127
128
0
255
15
Reverse Animate Rotate
Stop to fastest
Forward Spin
Stop to fastest
Reverse Spin
Stop to fastest
Indexed
Indexed With Blackout
Gobo
Function
13 16
Forward Spin
Reverse Spin
Continuous
Shake
TBD
Indexed & Indexed With Blackout&Shake
Position 1 (Open)
Position 2 ~ Position 8
Fixed
Gobo
14 17
Forward Wheel Spin
Stop to fastest
Reverse Wheel Spin
Stop to fastest
Continuous
Positioning from 0-360 degrees
Indexed
Position 1 (Open)
Position 2 ~ Position 8
Indexed With Blackout
Position 1 (Open)
9
11
Fixed
Gobo
Position 2 ~ Position 8
Indexed With Shake
Position 2
Position 3 ~ Position 8
Forward Wheel Spin
Stop to fastest
Reverse Wheel Spin
Stop to fastest
Indexed & Indexed With Blackout
Position 1 (Open)
15 18
10
12
Prism
Position 2
Position 3
Position 4
Forward Spin
16 19
11
13
Prism Rot
Stop to fastest
Reverse Spin
Stop to fastest
17 20
Focus
Continuous
12
Function
5m Auto Focus
7.5m Auto Focus
10m Auto Focus
15m Auto Focus
>20m Auto Focus
TBD
16
32
48
64
96
128
31
47
63
95
127
255
0
255
0
0
16
32
48
64
96
255
15
31
47
63
95
255
0
255
0
0
192
208
224
240
0
8
16
24
32
40
48
56
64
72
80
88
96
255
191
207
223
239
255
7
15
23
31
39
47
55
63
71
79
87
95
255
Continuous
18 21
12
14
Focus
Focus In to Focus Out
Auto Focus
Focus In to Focus Out Fine
Indexed
Pulse opening With Forward Blackout
Iris
Function
19 22
Pulse opening With Reverse Blackout
Pulse closing With Forward Blackout
Pulse closing With Reverse Blackout
TBD
Indexed
20 23
Iris
Max. diameter to Min.diameter
Pulse opening & Pulse closing
Pulse Slow to Fast
Indexed
Pulse opening With Forward Blackout
13
15
Iris
Pulse opening With Reverse Blackout
Pulse closing With Forward Blackout
Pulse closing With Reverse Blackout
Normal
Reset All
Pan&Tilt Reset
Color Reset
Gobo Reset
TBD
21 24
14
16
Control
Other Reset
Display Off
Display On
TBD
TBD
Hibernation
TBD
6. Unique Features
6.1 RDM, stand for “Remote Device Management”, with this function, users can realize remote control of the device,
13
such as remotely changing DMX address, reverse pan/tilt setting, check a lot of useful information such as temperature,
power consumption, fan speed. Etc. Every single device has a unique RDM code before left factory to distinguish from
each other, usually not suggest users change this code freely.
6.2 Software upgrade function via DMX cable, if there is any new firmware for this device come out, it can be upgraded
simply via a software upgrade box, no need to change any mechanical parts. The upgrade box is not included in the
package, if need any further assistance pls just contact authorized dealers.
6.3 Hibernation, the device will enter sleeping mode if activated after a period of disconnecting DMX signal to save the
power consumption, and will return immediately as soon as the DMX signal is sent again.
6.4 Display battery, this function is prepaid in the display PCB, users just need to install a normal 10440 600mAh 3.7V
rechargeable lithium battery, then users could power on the display and do setting without connect to main power.
6.5 Display back-up communication IC, there is a back-up communication IC installed in the display PCB, so users could
replace at once if the working one is broken, no need to wait long time from service.
6.6 Display flip, by press up and down button for more than 3 seconds, the display will flip automatically, this function is
useful to read menu conveniently when device is hanged.
8. Dimensions Drawing
9. Technical specification
Power supply
Power consumption
LED
DMX channels
Beam angle
Luminous flux
Fuse
Device dimensions
Net Weight
100-240 V AC, 50/60 Hz ~
250W
LumiEngin COB-2-1600M-W
21/24/14/16 modes
13°
22460lux@2.5m
T 3.15 A, 250 V
343x262x456mm
15KG
14
Download PDF
Similar pages