Narrow Pixel Pitch Direct View LED [VS-15NP

Narrow Pixel Pitch Direct View LED
VS-15NP160
By definition, pixel pitch is the distance from the center of an LED
element to the center of the next LED element. Our 1.5 mm
narrow pixel pitch LED (NPP-LED) is an indoor-exclusive highdefinition LED display with a smaller pixel size and pixel pitch
than most conventional indoor/outdoor LED displays. This
allows for creating seamless display walls with a wide viewing
angle in large installations.
Conventional
Indoor/Outdoor LED
Narrow Pixel Pitch
Direct View LED
Failure of an LED unit keeps
subsequent units from
displaying images
Signal Redundancy
In the unlikely event of a single-unit failure,
other panels will still keep displaying images
via two way image transmission throughout
the system.
Single signal
Redundant signal
Dual-input
signal
Power Redundancy
Mitsubishi Electric's NPP-LEDs are specifically engineered
to address the needs of demanding command and control
room environments by delivering stunning visuals with innovative
features and unbeatable durability and reliability.
Pixel pitch comparison
Redundant signals allow LED units
other than the failed unit to
display images
Optional power unit provides continuous
operation at time of a power module failure.
(Concept Image)
Compared to 30 x 30 mm reference
Control unit
10 mm (pixel pitch)
1.5 mm pixel pitch
Seamless
Flexible Installation
Delivers smooth and consistent graphics without the vertical and
horizontal black lines appearing in large-screen multi-display walls.
Narrow Pixel Pitch Direct View LED screens are available as
rear access - and front access models.
LED power consumption changes
depending on the content displayed.
Active power peak saving function limits
the maximum power consumption by
detecting the image brightness and
automatically optimizing the image.
Change
image
Normal image
(power consumption is low)
Based on black image
Image for screen gap such as LCD
Control unit
Change
image
Normal image
(power consumption is high)
Normal image
(power consumption is low)
Image non-screen gap such as LED
Long Service Life
Mitsubishi Electric's direct-view NPP-LED has a lifetime rating
of 100,000 hours till half-brightness. It is designed for continuous
24/7 operations that is often required for mission-critical
environments.
Dynamic Gamma
Wider color reproduction range for brilliant, vivid displays.
Optimal contrast ratio shows more details, even with darker contents.
Before
Original
Space-saving layout
After
Compensated
2-Dimensional Noise Reduction (2DNR)
LED brightness gradually diminishes over time as the
display gets used. So, when displaying a static image
over a long period of time, variations of luminance and
chromaticity are caused by the difference in the
operating time or age of each pixel.
Anti-Burn-In corrects these display variations and
anomalies. As a result, uniformed luminance
and chromaticity is preserved longer over the
lifetime of the display.
Natural Color Matrix
Smooth curved design
Reduces noise from compressed images (i.e., MPEG).
Scalability
Burn-in
Burn-in compensated
Intel® OPS-Standard slot (control unit)
Supports OPS standard computers
Supports OPS 3G-SDI-input board (DP-1SDI-3G)
Supports OPS HDBaseTTM input board (VC-LM1HD)
DP-1SDI-3G
Narrow Pixel Pitch Direct View LED
LED unit
LED unit (mm)
Model Name
VS-15NP160F
Pixel pitch
1.50 mm
LED type
Direct LED (SMD 3 in 1)
100,000 hours in all brightness modes
Average lifetime
320 x 360 pixels
Resolution
16,000:1 (typ.)
Contrast ratio
Viewing angle (1/2 gain)
90
480
VS-15NP160R
Horizontal
170°
Vertical
170°
16-bit
Color processing
540
50/60 Hz
Frame rate
Front maintenance structure
Calibrated brightness (typ.)
Power consumption (typ.)
*An LED unit with a power unit
Bright
800 cd/m2
Normal
500 cd/m2
Eco
190 cd/m2
Bright
195 W
Normal
150 W
Eco
105 W
Power connection
DC input/output x 1
Environmental condition
5-40
, 20-80 % RH non-condensing
Dimensions (W x H x D)
480 x 540 x 90 mm
11.9 kg
12.6 kg
Weight
Country of origin
Dimension for a full HD resolution (mm)
Japan
2880
Power unit
Model Name
S-NP15PWR
S-NP15PWR-EX
AC 100 – 240 V +/-10 %, 50/60 Hz +/-1 Hz
Voltage range
Circular type connector
Output power terminal
Redundant power supply
415 x 88 x 565 mm
Dimensions (W x H x D)
8.1 kg
Country of origin
1620
Weight
8.8 kg
Japan
Control unit
Model Name
VC-NP1000
Voltage range
AC 100 – 240 V +/-10 %, 50/60 Hz +/-1 Hz
Power consumption (typ.)
with an OPS
without OPS
30 W
LAN (RJ45 x 1)
External control
DVI-D (HDCP) x 2
Image input
VGA (640 x 480) - WUXGA (1920 x 1200)
Resolution
Horizontal
Input frequencies
80 W
Vertical
Pixel clock
Optional input board slot
Input signal terminals
Control interface
Dimensions (W x H x D)
31.5 - 92 kHz
49 - 85 Hz
Dimensions for a full HD resolution
130'' (2880 mm x 1620 mm)
Required components for a full HD resolution x18 (6 wide x 3 high)
(1920 x 1080 pixels)
weight*
15NP160F
227 kg
15NP160R
214 kg
*LED units only
25 - 165 MHz
Intel® OPS slot x 1
DVI-D (with HDCP) x 2 Up to 50-meter long DVI cable supported *1
LAN (RJ45 x 1)
415 x 108 x 194 mm
Weight
3.2 kg
Country of origin
Japan
*1 The length varies depending on the quality of the source signals and the cables.
* This product requires special installation to prevent falling or toppling. This should be done by installation specialists.
* Electrostatic discharge may harm the surface of the LED units. To prevent such damage, you should discharge static electricity from your body before you contact with the LED units.
* Power cord is not included with main unit. And need the designated DC power cord (JC-PC3DC2, 5, 8, 12, 15, 20, 30, or 60).
* Service parts for this product are only stocked for five years after model production is discontinued.
* All information contained herein is subject to change without prior notice.
* Intel is a registered trademark of Intel Corporation in the U.S and other countries.
* HDBaseT™ is a registered trademark of HDBaseT Alliance.
* Other brands, products and service names are trademarks or registered trademarks of the respective companies.
www.MitsubishiElectric.com/bu/displaywalls
S-188-7-C9956-B KYO 1712 Printed in Japan(IP)
Revised publication effective Dec. 2017.
Superseding publication S-188-7-C9956-A Mar. 2017.
Specifications are subject to change without notice.
Download PDF
Similar pages