ELITE SERIES
FOR MODELS :
1.2E
1.2E
2.2E
2.2E
ELLIPTICAL USER’S GUIDE
INTRODUCTION
IN T R O D U C T I O N
IMPORTANT
PRECAUTIONS
CONGRATULATIONS and THANK YOU for your purchase of this Elite Series elliptical!
ASSEMBLY
Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, an Elite Series elliptical can
help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics
and innovative features you need to get stronger and healthier, faster. Because we're committed to
designing fitness equipment from the inside out, we use only the highest quality components. It's a
commitment we back with one of the strongest frame-to-brake warranty packages in the industry.
You want exercise equipment that offers the most comfort, the best reliability and the highest quality
in its class.
BEFORE
YOU BEGIN
The Elite Series delivers.
TABLE OF C O N T E N T S
Before You Begin
18
Elliptical Operation
19
Conditioning Guidelines
24
Troubleshooting & Maintenance
30
Limited Warranty
34
CONTACT INFORMATION
CONDITIONING
GUIDELINES
5
6
12
TROUBLESHOOTING
& MAINTENANCE
Assembly
1.2E Assembly
2.2E Assembly
ELLIPTICAL
OPERATION
4
Back Panel
LIMITED
WARRANTY
Important Precautions
INTRODUCTION
I M P O R TA N T PRECAUTIONS
IMPORTANT
PRECAUTIONS
SAVE THESE INSTRUCTIONS
Read all instructions before using this elliptical. When using an electrical product, basic precautions
should always be followed. It is the responsibility of the owner to ensure that all users of this elliptical are
adequately informed of all warnings and precautions. If you have any questions after reading this manual,
contact Customer Tech Support at the number listed on the back panel of this manual.
ASSEMBLY
WARNING
To reduce the risk of burns, fire, electrical shock or injury to persons:
BEFORE
YOU BEGIN
• If you experience chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and
consult your physician before continuing.
• Maintain a comfortable pace. Do not sprint above 80 rpms on this machine.
• To maintain balance, it is recommended to keep a grip on the handlebars while exercising, mounting or
dismounting the machine.
• Do not wear clothes that might catch on any part of the elliptical.
• Do not turn pedal arms by hand.
• Make sure handlebars are secure before each use.
• Do not insert or drop any object into any opening.
• Unplug elliptical before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp
cloth only; never use solvents. (See MAINTENANCE)
• This elliptical should not be used by persons weighing more than 250 pounds on the 1.2E and 275 pounds
on the 2.2E. Failure to comply will void the warranty.
• This elliptical is intended for in-home use only. Do not use this elliptical in any commercial, rental, school
or institutional setting. Failure to comply will void the warranty.
• Do not use elliptical in garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply
may void the warranty.
• Use the elliptical only as described in this manual.
ELLIPTICAL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
At NO time should children under the age of 12 or petsbe closer to the elliptical than 10 feet.
At NO time should children under the age of 12 use the elliptical.
Children over the age of 12 should not use the elliptical without adult supervision.
LIMITED
WARRANTY
It is essential that your elliptical is used only indoors, in a climate controlled room. If your elliptical has been
exposed to colder temperatures or high moisture climates, it is strongly recommended that the elliptical is
warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.
INTRODUCTION
A S S E M B LY
IMPORTANT
PRECAUTIONS
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!
WARNING
ASSEMBLY
There are several areas during the assembly process of an elliptical that special attention must be paid.
It is very important to follow the assembly instructions correctly and to make sure all parts are firmly
tightened. If the assembly instructions are not followed correctly, the elliptical could have frame parts that
are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical,
the assembly instructions must be reviewed and corrective actions should be taken.
UNPACKING
ELLIPTICAL
OPERATION
BEFORE
YOU BEGIN
Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended
that you place a protective covering on your floor. Note: It is recommended that you apply grease to the
threads of each bolt as you assemble the product, to prevent loosening and noise. Also, during each
assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely
tightening any ONE bolt.
TROUBLESHOOTING
& MAINTENANCE
4&3*"-/6.#&3
*4-0$"5&%6/%&3
$0/40-&."45#005
SERIAL NUMBER:
MODEL NAME:
* Refer to the serial number and model name when calling for service.
* Also enter this serial number on your Warranty Card.
LIMITED
WARRANTY
enter your serial number and
model name in the boxes below:
CONDITIONING
GUIDELINES
Before proceeding, find your elliptical’s serial number
located under the console mast boot and enter it in
the space provided below. Also locate the model name
which is located on the side cover.
INTRODUCTION
& " 4 4 & . # -:
$0/40-&
IMPORTANT
PRECAUTIONS
(3*116-4&
611&3)"/%-&#"3
3&4*45"/$&,/0#
)"/%-&#"3$07&34
$0/40-&."45
ASSEMBLY
-08&3-*/,"3.
$0/40-&."45#005
45"#*-*;&356#&
'0051"%
53"/410358)&&-4
BEFORE
YOU BEGIN
(6*%&3"*1&%"-"3.
ELLIPTICAL
OPERATION
500-4*/$-6%&%
c NN"MMFO8SFODI
c NN"MMFO8SFODI
c 1IJMMJQT4DSFX%SJWFS
c NN'MBU8SFODI
c NN'MBU8SFODI
CONDITIONING
GUIDELINES
1"354*/$-6%&%
TROUBLESHOOTING
& MAINTENANCE
c
c
c
c
c
c
c
$POTPMF
$POTPMF.BTU
$POTPMF.BTU#PPU
6QQFS)BOEMFCBST
-PXFS-JOL"SN"TTFNCMJFT
1FEBM"SNT
1FEBM"SN$PWFST
c
c
c
c
c
c
c
4UBCJMJ[FS5VCF
(VJEF3BJMT
'SPOU6QQFS)BOEMFCBS$PWFST
3FBS6QQFS)BOEMFCBS$PWFST
""#BUUFSJFT
)BSEXBSF#BHT
3FTJTUBODF,OPC
LIMITED
WARRANTY
*GZPVIBWFRVFTUJPOTPSJGUIFSFBSFBOZNJTTJOHQBSUT)PSJ[PO'JUOFTTHVBSBOUFFTDPNQMFUFTBUJTGBDUJPO
$VTUPNFS5FDI4VQQPSUDPOUBDUJOGPSNBUJPOJTMPDBUFEPOUIFCBDLQBOFMPGUIJTNBOVBM
INTRODUCTION
ASSEMBLY step 1
A) Open HARDWARE BAG FOR STEP 1.
#0-5"
IMPORTANT
PRECAUTIONS
B) Attach STABILIZER TUBE to the
MAIN FRAME using 2 BOLTS (A).
ASSEMBLY
45"#*-*;&356#&
."*/'3".&
HARDWARE BAG FOR STEP 1 CONTENTS :
BEFORE
YOU BEGIN
#0-5"
NN
2UZ
ASSEMBLY S T E P 2
ELLIPTICAL
OPERATION
A) Open HARDWARE BAG FOR STEP 2.
B) Slide left and right GUIDE RAILS
into MAIN FRAME.
CONDITIONING
GUIDELINES
C) Attach GUIDE RAILS using 2
BOLTS (B).
TROUBLESHOOTING
& MAINTENANCE
NOTE: You may have to rotate the
guide rails back and forth to get
them to slide into the frame.
#0-54#
HARDWARE BAG FOR STEP 2 CONTENTS :
#0-5#
NN
2UZ
LIMITED
WARRANTY
."*/'3".&
INTRODUCTION
1.2E ASSEMBLY
ASSEMBLY step 3
IMPORTANT
PRECAUTIONS
HARDWARE BAG FOR STEP 3 CONTENTS :
$0/40-&."45
#0-5#
NN
2UZ
$0/40-&8*3&4
$0/40-&."45#005
ASSEMBLY
"3$8"4)&34&
/65'
#0-54$
-0$,8"4)&34%
#0-5$
NN
2UZ
-0$,
8"4)&3%
2UZ
"3$
8"4)&3&
2UZ
/65'
NN
2UZ
#0-5#
BEFORE
YOU BEGIN
."*/'3".&
A) Open HARDWARE BAG FOR STEP 3.
B) Slide the CONSOLE MAST BOOT over the bottom of the CONSOLE MAST.
ELLIPTICAL
OPERATION
C) Carefully pull console wires through the CONSOLE MAST. Attach the CONSOLE WIRES to the pre-attached
routing wire. Discard wire when finished.
D) Slide CONSOLE MAST into MAIN FRAME.
E) Insert 3 BOLTS (C), 3 LOCK WASHERS (D) and 3 ARC WASHERS (E) into back of CONSOLE MAST.
CONDITIONING
GUIDELINES
F) Attach CONSOLE MAST to MAIN FRAME using BOLT (B) and NUT (F).
G) Slide CONSOLE MAST BOOT down to cover exposed bolts.
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
INTRODUCTION
ASSEMBLY step 4
IMPORTANT
PRECAUTIONS
NOTE: There is NO hardware bag for
this step. Hardware is pre-installed.
A) Remove PRE-ATTACHED BOLT &
WASHERS from CONSOLE MAST.
611&3)"/%-&#"3
BEFORE
YOU BEGIN
13&"55"$)&%
#0-58"4)&3
B) Slide UPPER HANDLEBARS onto
CONSOLE MAST and attach by
re-inserting PRE-ATTACHED BOLT
& WASHERS.
ASSEMBLY
$0/40-&."45
1&%"-"3.$07&3
A) Open HARDWARE BAG FOR STEP 5.
/65(
5&'-0/$0"5&%
8"4)&34)
CONDITIONING
GUIDELINES
B) Place TEFLON COATED WASHER
(H) over CRANK ARM followed by
PEDAL ARM.
C) Place a second TEFLON COATED
WASHER (H) over PEDAL ARM and
attach using NUT (G).
$3"/,"3.
1&%"-"3.
TROUBLESHOOTING
& MAINTENANCE
D) Repeat on other side.
4$3&8*
/05&XBTIFSPOCPUUPN
TIPVMECFGBDJOHCMBDLTJEFVQ
E) Attach PEDAL ARM COVERS to
PEDAL ARMS using SCREWS (I).
HARDWARE BAG FOR STEP 5 CONTENTS :
/65(
NN
2UZ
5&'-0/$0"5&%
8"4)&3)
NN
2UZ
4$3&8*
NN
2UZ
LIMITED
WARRANTY
/05&XBTIFSPOUPQTIPVME
CFGBDJOHCMBDLTJEFEPXO
ELLIPTICAL
OPERATION
ASSEMBLY step 5
INTRODUCTION
1.2E ASSEMBLY
ASSEMBLY step 6
IMPORTANT
PRECAUTIONS
A) Open HARDWARE BAG FOR STEP 6.
13&"55"$)&%
4&54$3&84
B) To attach LOWER LINK ARM to
PEDAL ARM, slide SPACER (J),
FLAT WASHER (K) and WAVY
WASHER (L) onto PEDAL ARM
BRACKET.
ASSEMBLY
NOTE: Attaching the lower link arm
assembly to the pedal arm first
makes assembly of the linkage
arms less difficult.
)"/%-&#"3$07&3
4$3&840
BEFORE
YOU BEGIN
-08&3-*/,"3.
C) Slide LOWER LINK ARM onto
PEDAL ARM BRACKET, followed by
FLAT WASHER (M) and
BOLT (N).
D) Repeat on other side.
ELLIPTICAL
OPERATION
E) Slide LOWER LINK ARM onto
UPPER HANDLEBAR and attach
using 2 PRE-ATTACHED SET
SCREWS.
#0-5/
1&%"-"3.#3"$,&5
CONDITIONING
GUIDELINES
'-"58"4)&3.
8"7:8"4)&3-
F) Attach HANDLEBAR COVERS using
2 SCREWS (O).
G) Repeat on other side.
'-"58"4)&3,
41"$&3+
TROUBLESHOOTING
& MAINTENANCE
HARDWARE BAG FOR STEP 6 CONTENTS :
41"$&3+
NNBYJT
2UZ
'-"58"4)&3,
NN
2UZ
LIMITED
WARRANTY
'-"5
8"4)&3.
NN
2UZ
10
#0-5/
NN
2UZ
8"7:
8"4)&3-
NN
2UZ
4$3&80
NN
2UZ
3&4*45"/$&
,/0#
INTRODUCTION
NOTE: There is NO hardware bag
for this step. All hardware is preinstalled.
501,&:)0-&
#0550.,&:)0-&
A) Pull TENSION CABLE out from
square hole in console mast.
STEPS A-E
BEFORE
YOU BEGIN
3&4*45"/$&
,/0##3"$,&5
D) Once the TENSION WIRE is in
position, turn the RESISTANCE
KNOB to the lowest resistance
setting.
E) Slide RESISTANCE KNOB &
BRACKET into the CONSOLE MAST
and attach using PRE-INSTALLED
BOLT & WASHER.
CONDITIONING
GUIDELINES
F) Attach the CONSOLE WIRES (2
heart rate wires and 1 speed
sensor wire).
G) Carefully tuck the CONSOLE WIRES
into the CONSOLE MAST before
attaching the CONSOLE.
13&"55"$)&%
4$3&84
TROUBLESHOOTING
& MAINTENANCE
5&/4*0/8*3&
C) While holding the RESISTANCE
KNOB BRACKET, pull the
RESISTANCE KNOB up to slide it
into the TOP KEY HOLE position on
the RESISTANCE KNOB BRACKET.
ELLIPTICAL
OPERATION
5&/4*0/
$"#-&
ASSEMBLY
B) Turn RESISTANCE KNOB to highest
resistance setting. Place the
TENSION WIRE into the BOTTOM
KEY HOLE on the RESISTANCE
KNOB BRACKET.
H) Attach CONSOLE to the CONSOLE
MAST using the 2 PRE-ATTACHED
SCREWS (screws will have to be
removed from the console first).
DO NOT PINCH WIRES!
STEPS F-H
YOU’RE FINISHED!
11
LIMITED
WARRANTY
13&*/45"--&%
#0-58"4)&3
IMPORTANT
PRECAUTIONS
ASSEMBLY step 7
INTRODUCTION
& " 4 4 & . # -:
(3*116-4&
$0/40-&
IMPORTANT
PRECAUTIONS
611&3)"/%-&#"3
)"/%-&#"3$07&34
$0/40-&."45
-08&3)"/%-&#"3
$0/40-&."45#005
ASSEMBLY
45"#*-*;&356#&
1*705*/('0051"%
53"/410358)&&(6*%&3"*-
1&%"-"3.$07&3
BEFORE
YOU BEGIN
1&%"-"3.
30--&38)&&-$07&34
-*/,"3.
500-4*/$-6%&%
ELLIPTICAL
OPERATION
CONDITIONING
GUIDELINES
NN"MMFO8SFODI
NN"MMFO8SFODI
1IJMMJQT4DSFX%SJWFS
NN'MBU8SFODI
NN'MBU8SFODI
c
c
c
c
c
1"354*/$-6%&%
TROUBLESHOOTING
& MAINTENANCE
c
c
c
c
c
c
c
c
$POTPMF
$POTPMF.BTU
$POTPMF.BTU#PPU
4UBCJMJ[FS5VCF
6QQFS)BOEMFCBST
-PXFS)BOEMFCBST
-JOL"SNT
1FEBM"SNT
c
c
c
c
c
c
c
1FEBM"SN$PWFST
(VJEF3BJMT
1JWPUJOH'PPU1BET
'SPOU)BOEMFCBS$PWFST
3FBS)BOEMFCBS$PWFST
1PXFS4VQQMZ
)BSEXBSF#BHT
LIMITED
WARRANTY
*GZPVIBWFRVFTUJPOTPSJGUIFSFBSFBOZNJTTJOHQBSUT)PSJ[PO'JUOFTTHVBSBOUFFTDPNQMFUFTBUJTGBDUJPO
$VTUPNFS5FDI4VQQPSUDPOUBDUJOGPSNBUJPOJTMPDBUFEPOUIFCBDLQBOFMPGUIJTNBOVBM
12
INTRODUCTION
ASSEMBLY step 1
A) Open HARDWARE BAG FOR STEP 1.
IMPORTANT
PRECAUTIONS
B) Attach STABILIZER TUBE to the
MAIN FRAME using 2 BOLTS (A).
#0-5"
ASSEMBLY
45"#*-*;&356#&
."*/'3".&
HARDWARE BAG FOR STEP 1 CONTENTS :
BEFORE
YOU BEGIN
#0-5"
NN
2UZ
ASSEMBLY S T E P 2
ELLIPTICAL
OPERATION
A) Open HARDWARE BAG FOR STEP 2.
B) Slide left and right GUIDE RAILS
into MAIN FRAME.
CONDITIONING
GUIDELINES
C) Attach GUIDE RAILS using 2
BOLTS (B).
TROUBLESHOOTING
& MAINTENANCE
NOTE: You may have to rotate the
guide rails back and forth to get
them to slide into the frame.
#0-54#
HARDWARE BAG FOR STEP 2 CONTENTS :
#0-5#
NN
2UZ
13
LIMITED
WARRANTY
."*/'3".&
INTRODUCTION
2.2E ASSEMBLY
ASSEMBLY step 3
IMPORTANT
PRECAUTIONS
HARDWARE BAG FOR STEP 3 CONTENTS :
$0/40-&."45
$0/40-&8*3&4
#0-5$
NN
2UZ
-0$,
8"4)&3%
2UZ
"3$
8"4)&3&
2UZ
/65'
NN
2UZ
$0/40-&."45#005
ASSEMBLY
"3$8"4)&34&
/65'
#0-54$
-0$,8"4)&34%
#0-5#
BEFORE
YOU BEGIN
."*/'3".&
#0-5#
NN
2UZ
A) Open HARDWARE BAG FOR STEP 3.
B) Slide the CONSOLE MAST BOOT over the bottom of the CONSOLE MAST.
ELLIPTICAL
OPERATION
C) Carefully pull console wires through the CONSOLE MAST. Attach the CONSOLE WIRES to the pre-attached
routing wire. Discard wire when finished.
D) Slide CONSOLE MAST into MAIN FRAME.
E) Insert 3 BOLTS (C), 3 LOCK WASHERS (D) and 3 ARC WASHERS (E) into back of CONSOLE MAST.
CONDITIONING
GUIDELINES
F) Attach CONSOLE MAST to MAIN FRAME using BOLT (B) using NUT (F).
G) Slide CONSOLE MAST BOOT down to cover exposed bolts.
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
14
INTRODUCTION
/05&XBTIFSPOUPQTIPVME
CFGBDJOHCMBDLTJEFEPXO
1&%"-"3.$07&3
IMPORTANT
PRECAUTIONS
ASSEMBLY step 4
A) Open HARDWARE BAG FOR STEP 4.
B) Place TEFLON WASHER (H) over
CRANK ARM followed by PEDAL
ARM.
5&'-0/8"4)&34)
C) Place a second TEFLON WASHER
(H) over PEDAL ARM and attach
using NUT (G).
ASSEMBLY
/65(
D) Repeat on other side.
4$3&8*
1&%"-"3.
/05&XBTIFSPOCPUUPN
TIPVMECFGBDJOHCMBDLTJEFVQ
E) Attach PEDAL ARM COVERS to
PEDAL ARMS using SCREWS (I).
BEFORE
YOU BEGIN
$3"/,"3.
HARDWARE BAG FOR STEP 4 CONTENTS :
/65(
NN
2UZ
4$3&8*
NN
2UZ
ELLIPTICAL
OPERATION
5&'-0/8"4)&3)
NN
2UZ
ASSEMBLY step 5
CONDITIONING
GUIDELINES
A) Open HARDWARE BAG FOR STEP 5.
611&3)"/%-&#"3
13&"55"$)&%
#0-58"4)&3
)"/%-&#"3$07&3
-08&3
)"/%-&#"3
4$3&84+
HARDWARE BAG FOR STEP 2 CONTENTS :
4$3&8+
NN
2UZ
B) Remove PRE-ATTACHED BOLT &
WASHERS from CONSOLE MAST.
C) Slide LOWER HANDLEBARS onto
CONSOLE MAST and attach by
re-inserting PRE-ATTACHED BOLT
& WASHERS.
TROUBLESHOOTING
& MAINTENANCE
13&"55"$)&%4$3&84
D) Attach UPPER HANDLEBARS to
LOWER HANDLEBARS using PREATTACHED SCREWS.
D) Attach HANDLEBAR COVERS using
4 SCREWS (J).
15
LIMITED
WARRANTY
$0/40-&
."45
INTRODUCTION
2.2E ASSEMBLY
AS S E M B LY S T E P 6
IMPORTANT
PRECAUTIONS
#0-54.
'0051"%#3"$,&5
'0051"%
ASSEMBLY
1&%"-"3.
8"7:8"4)&3-
'0051-"5&
BEFORE
YOU BEGIN
#0-54,
A) Open HARDWARE BAG FOR STEP 6.
B) Attach FOOTPAD to FOOT PLATE using 4 BOLTS (K).
ELLIPTICAL
OPERATION
C) Slide WAVY WASHER (L) and the FOOT PLATE onto the PEDAL ARM axle.
D) Attach FOOTPAD BRACKET to FOOT PLATE using 3 BOLTS (M).
E) Repeat on other side.
CONDITIONING
GUIDELINES
HARDWARE BAG FOR STEP 6 CONTENTS :
#0-5,
NN
2UZ
#0-5.
NN
2UZ
TROUBLESHOOTING
& MAINTENANCE
8"7:
8"4)&3-
2UZ
'0051"%#3"$,&5
2UZ
LIMITED
WARRANTY
16
INTRODUCTION
ASSEMBLY step 7
/650
#0-5/
B) Insert SPACER (Q).
5&'-0/8"4)&31
ASSEMBLY
C) Insert 2 TEFLON WASHERS (P)
between LINK ARM and LOWER
HANDLEBAR BRACKET.
D) Attach UPPER HANDLEBARS to
LOWER HANDLEBARS using PREATTACHED SCREWS.
5&'-0/8"4)&31
HARDWARE BAG FOR STEP 7 CONTENTS :
5&'-0/
8"4)&31
NN
2UZ
#0-5/
NN
2UZ
/650
2UZ
D) Attach LINK ARM to LOWER
HANDLEBAR using BOLT (N) and
NUT (O).
BEFORE
YOU BEGIN
41"$&32
E) Repeat on other side.
41"$&32
2UZ
ELLIPTICAL
OPERATION
-*/,"3.
IMPORTANT
PRECAUTIONS
A) Open HARDWARE BAG FOR STEP 7.
AS SEMBLY S T E P 8
$0/40-&8*3&4
13&"55"$)&%
4$3&84
$0/40-&."45
YOU’RE FIN I S H E D !
A) Attach the CONSOLE WIRES.
B) Carefully tuck the CONSOLE
MAST wires into the CONSOLE
MAST before attaching the
CONSOLE.
TROUBLESHOOTING
& MAINTENANCE
$0/40-&
CONDITIONING
GUIDELINES
NOTE: There is NO hardware bag
for this step. All hardware is preinstalled.
C) Attach CONSOLE to the
CONSOLE MAST using the
4 PRE-ATTACHED SCREWS
(screws will have to be removed
from the console first).
DO NOT PINCH WIRES!
17
LIMITED
WARRANTY
-08&3)"/%-&#"3
#3"$,&5
INTRODUCTION
B E F O R E Y O U BEGIN
IMPORTANT
PRECAUTIONS
CONGRATULATIONS! on choosing your elliptical. You’ve taken an important step in developing and
sustaining an exercise program! Your elliptical is a tremendously effective tool for achieving your personal
fitness goals. Regular use of your elliptical can improve the quality of your life in many ways.
Here are just a few of the health benefits of exercise:
ASSEMBLY
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
BEFORE
YOU BEGIN
The key to reaping these benefits is to develop an exercise habit. Your new
elliptical will help you eliminate obstacles that prevent you from exercising.
Inclement weather and darkness won't interfere with your workout when you
use your elliptical in the comfort of your home. This guide provides you with
basic information for using and enjoying your new machine.
LOCATION OF THE ELLIPTICAL
GPPU
GFFU
GFFU
ELLIPTICAL
OPERATION
Place the elliptical on a level surface. There should be 6 feet of clearance
behind the elliptical, 3 feet on each side and one foot in front for the power
cord (See diagram to the right). Do not place the elliptical in any area that
will block any vent or air openings. The elliptical should not be located in a
garage, covered patio, near water or outdoors.
GFFU
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
18
INTRODUCTION
EL L I P T I C A L O P E R AT ION
IMPORTANT
PRECAUTIONS
POWER
1.2E: Your elliptical console is powered by a 2 AA Batteries (included). The batteries are located in a compartment
on the underside of the console. 2.2E: Your programmable elliptical is powered by a power supply. The power cord
must be plugged into the power jack, which is located in the front of the machine near the STABILIZER TUBE.
Do not operate the elliptical if the power cord or plug is damaged.
If the elliptical appears not to be working properly, do not use the elliptical.
ASSEMBLY
WARNING
MOVING
ELLIPTICAL
OPERATION
CONDITIONING
GUIDELINES
Our ellipticals are well built and heavy, weighing up to 200 lbs! Use care when
moving and get additional help if necessary.
FOOT POSITIONING
TROUBLESHOOTING
& MAINTENANCE
Your elliptical offers a variety of foot positions. Moving your foot to the forward most position of the foot pad
increases your step height, which will create a feel similar to a step machine. Placing your foot toward the back
of the foot pad decreases your step height and creates more of a gliding feel, similar to a smooth walk or run.
Your elliptical also allows you to pedal both forward and backwards to offer a variation to your workout and to
focus on other major leg muscle groups such as your hamstrings and calves.
19
LIMITED
WARRANTY
WARNING
BEFORE
YOU BEGIN
Your elliptical has a pair of transport wheels
built into the FRONT STABILIZER TUBE. To move,
first remove the power supply, firmly grasp the
CONSOLE MAST and carefully tilt and roll.
INTRODUCTION
1. 2 E C O N S O L E D I S P L AY & O P E R AT I O N
IMPORTANT
PRECAUTIONS
ASSEMBLY
5*.&
41&&%
31.
%*45"/$&
16-4&
BEFORE
YOU BEGIN
4&5
5*.&
)0-%
50
3&4&5
Your elliptical console is powered by a 2 AA Batteries (included).
The batteries are located in a compartment on the underside of the console.
ELLIPTICAL
OPERATION
1. QUICK START
Simply begin exercising. The console will automatically begin counting up and tracking your information.
2. RESET
CONDITIONING
GUIDELINES
Press and hold the HOLD TO RESET button on the console for 2 seconds.
3. CHOOSING YOUR TIME
Press the SET TIME button on the console to select your workout time (time is set in 1 minute increments).
4. STARTING YOUR WORKOUT
TROUBLESHOOTING
& MAINTENANCE
Start pedaling, the console will automatically begin counting down.
5. ADJUSTING YOUR RESISTANCE
Turn the RESISTANCE KNOB to change your resistance level during the workout.
6. FINISHING YOUR WORKOUT
LIMITED
WARRANTY
Remember to gradually slow down your pace before stopping your workout. The machine will not stop
moving if you stop your feet abruptly. After you have finished your workout, the console will ‘beep’ several
times to let you know your workout is finished.
20
INTRODUCTION
I
ASSEMBLY
A
IMPORTANT
PRECAUTIONS
2.2E CONSO L E D I S P L AY
D
G
C
BEFORE
YOU BEGIN
B
E
F
ELLIPTICAL
OPERATION
H
A) Monitor Display: Speed, Time, Pulse, Distance, Level, Calories and Program Profiles.
B) START: Press to start your workout.
CONDITIONING
GUIDELINES
C) Stop: Press to pause or end your workout. Hold for 2 seconds to reset the elliptical.
D) ENTER: Used to set your program.
E) ARROW KEYS: Used to adjust resistance and make selections.
F) ONE-TOUCH RESISTANCE Keys: Used to reach desired resistance more quickly.
H) PULSE GRIPS: Displays heart rate (see page 23 for more information).
i) MUSIC PLAYER HOLDER: Holds reading material or music player.
21
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
G) This button is not used on this model.
INTRODUCTION
2. 2 E C O N S O L E O PE R AT I O N
IMPORTANT
PRECAUTIONS
Your Elliptical Trainer is powered by a power supply. The power supply must be plugged into
the power jack, which is located in the front of the machine near the front stabilizer tube
ASSEMBLY
QU I C K S TA RT
Simply press the start key to begin working out.
SE L E C T I N G P R O G R A M S
BEFORE
YOU BEGIN
1) CHOOSING A PROGRAM
With the program text scrolling, press the arrow keys to scroll through the different programs. Press enter
to choose your desired program. Once you choose your program, you will see the resistance level scrolling
across the screen.
2) CHOOSING A LEVEL
ELLIPTICAL
OPERATION
With the level text scrolling, press the arrow keys to scroll through the different levels. Press ‘ENTER’ to
choose your desired level. Once you choose your level, you will see the time scrolling across the screen.
3) CHOOSING A RESISTANCE (Manual Program)
CONDITIONING
GUIDELINES
With the resistance text scrolling, press the arrow keys or quick resistance keys to scroll through the
different resistance levels. Press enter to choose your desired resistance. Once you choose your resistance,
you will see the time scrolling across the screen.
4) CHOOSING A TIME
With the time text scrolling, press the arrow keys to scroll through the different times. Press enter to
choose your desired time. Once you choose your time, press the ‘Enter’ button and begin your workout.
TROUBLESHOOTING
& MAINTENANCE
5) FINISHING YOUR WORKOUT
Press the ‘Stop’ button to pause your workout, press and hold to reset your workout. Remember to
gradually slow down your pace before stopping or pausing your workout. The machine will not stop moving
if you stop your feet abruptly. After you have finished your workout, the console will retain the data from
your workout for 30 seconds before resetting.
LIMITED
WARRANTY
22
INTRODUCTION
P rogram P rofiles
IMPORTANT
PRECAUTIONS
MANUAL
manual
Allows you to adjust the resistance level to your preference, without a preset program.
MANUAL
INTERVALS
INTERVALS
MANUAL
INTERVALS
(2.2E only)
ROLLING
Improves
your strength, speed and endurance by raising and lowering the resistance levels
through-out your workout to involve both your heart and muscles.
ROLLING
INTERVALS
MANUALLOSS
WEIGHT
ASSEMBLY
WEIGHT LOSS (2.2E only)
ROLLING
ROLLING
INTERVALS
GOLF COURSE
Creates the feeling of moving up and down hills by gradually increasing and decreasing the
GOLF
COURSE
resistance.
WEIGHT
LOSS
ROLLING
RACE
RACECOURSE LOSS (2.2E only)
GOLF
WEIGHT
WEIGHT
LOSS
weight loss by raising and lowering the resistance level, while keeping you in your fat
burning
RACE
CUSTOM
1 zone.
GOLF
COURSE
BEFORE
YOU BEGIN
CUSTOM
1
Promotes
CUSTOM 2
RACE
CUSTOM
CUSTOM12
THR ZONE 1
CUSTOM
HEARTCUSTOM
21 1 E
THRRAT
ZONE
THR ZONE 2
ELLIPTICAL
OPERATION
CUSTOM
2 12
THRZONE
ZONE
THR
Handlebars
VALLEY
Place the palm
of your hands directly on the grip pulse handlebars. Both hands must grip the bars for your heart
rate to register.
It takes
5 consecutive heart beats (15-20 seconds) for your heart rate to register. When gripping
VALLEY
THR
ZONE
21
TOUR
the pulse handlebars,
do not grip tightly. Holding the grips tightly may elevate your blood pressure. Keep a loose,
cupping hold.VALLEY
You
may experience an erratic readout if consistently holding the grip pulse handlebars. Make sure
TOUR
THR
ZONE 2
to clean the pulse sensors to ensure proper contact can be maintained.
CONDITIONING
GUIDELINES
TOUR
VALLEY
23
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
TOUR
INTRODUCTION
C O N D I T I O N I N G GUIDELINES
IMPORTANT
PRECAUTIONS
Always consult your physician before beginning an exercise program.
HOW OFTEN? (Frequency of Workouts)
ASSEMBLY
The American Heart Association recommends that you exercise at least 3 to 4 days per week to maintain
cardiovascular fitness. If you have other goals such as weight or fat loss, you will achieve your goal faster with
more frequent exercise. Whether it’s 3 days or 6 days, remember that your ultimate goal should be to make
exercise a lifetime habit. Many people are successful staying with a fitness program if they set aside a specific
time of day to exercise. It doesn’t matter whether it’s in the morning before breakfast, during lunch hour or while
watching the evening news. What’s more important is that it’s a time that allows you to keep a schedule, and a
time when you won’t be interrupted. To be successful with your fitness program, you have to make it a priority in
your life. So decide on a time, pull out your day planner and pencil in your exercise times for the next month!
HOW LONG? (Duration of Workouts)
BEFORE
YOU BEGIN
For aerobic exercise benefits, it’s recommended that you exercise from between 24 and 60 minutes per session.
But start slowly and gradually increase your exercise times. If you’ve been sedentary during the past year, it may
be a good idea to keep your exercise times to as little as five minutes initially. Your body will need time to adjust
to the new activity. If your goal is weight loss, a longer exercise session at lower intensities has been found to
be most effective. A workout time of 48 minutes or more is recommended for best weight loss results.
ELLIPTICAL
OPERATION
HOW HARD? (Intensity of Workouts)
How hard you workout is also determined by your goals. If you use your machine to prepare for a 5K workout,
you will probably work out at a higher intensity than if your goal is general fitness. Regardless of your long
term goals, always begin an exercise program at low intensity. Aerobic exercise does not have to be painful to
be beneficial! There are two ways to measure your exercise intensity. The first is by monitoring your heart rate
(using the grip pulse handlebars or a wireless chest transmitter - may be sold separately), and the second is by
evaluating your perceived exertion level (this is simpler than it sounds!).
CONDITIONING
GUIDELINES
PERCEIVED EXERTION LEVEL
TROUBLESHOOTING
& MAINTENANCE
A simple way to gauge your exercise intensity is to evaluate your perceived exertion level. While exercising, if you
are too winded to maintain a conversation without gasping, you are working out too hard. A good rule of thumb
is to work to the point of exhilaration, not exhaustion. If you cannot catch your breath, it’s time to slow down.
Always be aware of these warning signs of overexertion.
LIMITED
WARRANTY
24
INTRODUCTION
IMPORTANT
PRECAUTIONS
TARGET HE A R T R AT E Z O N E C H A R T
"(&
5 " 3
(
&
5
;
0
/&
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
CONDITIONING
GUIDELINES
example:
TROUBLESHOOTING
& MAINTENANCE
For a 42-year-old user: Find age along the bottom of the chart (round to 40), follow age column up to
the target zone bar. Results: 60% of maximum Hear Rate = 108 Beats Per Minute, 75% of maximum
Heart Rate = 135 Beat Per Minute.
Always consult your physician before beginning an exercise program.
25
LIMITED
WARRANTY
#&"541&3.*/65&
Target Heart Rate Zone tells you
the number of times per minute
your heart needs to beat to
achieve a desired workout effect.
It is represented as a percentage
of the maximum number of times
your heart can beat per minute.
Target Zone will vary for each
individual, depending on age,
current level of conditioning,
and personal fitness goals. The
American Heart Association
recommends working-out at a
Target Heart Rate Zone of between
60% and 75% of your maximum
heart rate. A beginner will want to
workout in the 60% range while
a more experienced exerciser will
want to workout in the 70-75%
range. See chart for reference.
ASSEMBLY
What is Target Heart Rate Zone?
INTRODUCTION
5*14
STRETCHING
IMPORTANT
PRECAUTIONS
STRETCH FIRST
Before using your product, it is best to take a few minutes to do a few gentle stretching exercises. Stretching
prior to exercise will improve flexibility and reduce chances of exercise related injury. Ease into each of these
stretches with a slow gentle motion. Do not stretch to the point of pain. Make sure not to bounce while doing
these stretches.
ASSEMBLY
1. STANDING CALVE MUSCLE STRETCH
BEFORE
YOU BEGIN
Stand near a wall with the toes of your left foot about 18" from the wall, and
the right foot about 12" behind the other foot. Lean forward, pushing against
the wall with your palms. Keep your heels flat and hold this position for a
count of 15 seconds. Make sure that you do not bounce while stretching.
Repeat on the other side.
2. STANDING QUADRICEPS STRETCH
ELLIPTICAL
OPERATION
Using a wall to provide balance, grasp your left ankle
with your left hand and hold your foot against the back
of your thigh for 15 seconds. Repeat with your right
ankle and hand.
CONDITIONING
GUIDELINES
3. SITTING HAMSTRING & LOWER BACK MUSCLE STRETCH
TROUBLESHOOTING
& MAINTENANCE
Sit on the floor with your legs together and straight out in front of you. Do
not lock your knees. Extend your fingers towards your toes and hold for a
count of 15 seconds. Make sure that you do not bounce while stretching. Sit
upright again. Repeat one time.
LIMITED
WARRANTY
26
INTRODUCTION
5*14
THE IMPORTANCE OF WARM UP & COOL DOWN
IMPORTANT
PRECAUTIONS
WARM UP
The first 2 to 5 minutes of a workout should be devoted to warming up. The warm-up will limber your
muscles and prepare them for more strenuous exercise. Make sure that you warm-up on your product at a
slow pace. The warm up should gradually bring your heart rate into your Target Heart Rate Zone.
COOL DOWN
BEFORE
YOU BEGIN
ACHIEVING YOUR FITNESS GOALS
ELLIPTICAL
OPERATION
An important step in developing a long term fitness program is to determine your goals. Is your primary
goal for exercising to lose weight? Improve muscle? Reduce stress? Prepare for the spring racing schedule?
Knowing what your goals are will help you develop a more successful exercise program. Below are some
common exercise goals:
CONDITIONING
GUIDELINES
• Weight Loss - lower intensity, longer duration workouts
• Improve Body Shape and Tone - interval workouts, alternate between hi and low intensities
• Increased Energy Level - more frequent daily workouts
• Improved Sports Performance - high intensity workouts
• Improved Cardiovascular Endurance - moderate intensity, longer duration workouts
TROUBLESHOOTING
& MAINTENANCE
If possible try to define your personal goals in precise, measurable terms, and then put your goals in writing.
The more specific you can be, the easier it will be to track your progress. If your goals are long term, divide
them up into monthly and weekly segments. Longer term goals can lose some of the immediate motivation
benefits. Short term goals are easier to achieve. Your console provides you with several readouts that can
be used to record your progress. You can track Distance, Calories and Time.
KEEPING AN EXERCISE DIARY
To make your personal exercise log book, photocopy the weekly and monthly log sheets, which are located
on the following pages, or you can print them off of your computer by going to:
www.horizonfitness.com/guides/weeklylog.pdf
www.horizonfitness.com/guides/monthlylog.pdf
As your fitness improves, you can look back and see how far you’ve come!
27
LIMITED
WARRANTY
5*14
ASSEMBLY
Never stop exercising suddenly! A cool-down period of 3-5 minutes allows your heart to readjust to the
decreased demand. Make sure that your cool down period consists of a very slow pace to allow your heart
rate to lower. After the cool-down, repeat the stretching exercises listed above to loosen and relax your
muscles.
INTRODUCTION
M O N T H LY L O G S HEETS
IMPORTANT
PRECAUTIONS
.0/5)
8 && , ASSEMBLY
% * 4 5"/$&
.0/5)-:(0"$"-03*&4
5*.&
% * 4 5"/$&
.0/5)-:(0"$"-03*&4
5*.&
% * 4 5"/$&
.0/5)-:(0"$"-03*&4
5*.&
. 0 / 5 ) -: 5 0 5" - 4 BEFORE
YOU BEGIN
.0/5)
8 && , ELLIPTICAL
OPERATION
. 0 / 5 ) -: 5 0 5" - 4 CONDITIONING
GUIDELINES
.0/5)
8 && , TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
. 0 / 5 ) -: 5 0 5" - 4 28
INTRODUCTION
W E E K LY L O G S H E E T S
% ":
8&&,-:(0"% "5&
%*45"/$&
$"-03*&4
5*.&
IMPORTANT
PRECAUTIONS
8& & , $0..&/54
46/% ":
.0/ % ":
56&4 % ":
8&% / & 4 % ":
ASSEMBLY
5)63 4 % ":
'3*% ":
4"56 3 % ":
8& & , % ":
BEFORE
YOU BEGIN
8& & , -: 5 0 5"- 4 8&&,-:(0"% "5&
%*45"/$&
$"-03*&4
5*.&
$0..&/54
46/% ":
.0/ % ":
ELLIPTICAL
OPERATION
56&4 % ":
8&% / & 4 % ":
5)63 4 % ":
'3*% ":
4"56 3 % ":
8& & , % ":
CONDITIONING
GUIDELINES
8& & , -: 5 0 5"- 4 8&&,-:(0"% "5&
%*45"/$&
$"-03*&4
5*.&
$0..&/54
TROUBLESHOOTING
& MAINTENANCE
46/% ":
.0/ % ":
56&4 % ":
8&% / & 4 % ":
5)63 4 % ":
'3*% ":
8& & , -: 5 0 5"- 4 29
LIMITED
WARRANTY
4"56 3 % ":
INTRODUCTION
T R O U B L E S H O OTING
Your Horizon Fitness elliptical is designed to be reliable and maintenance free. However, if you do experience
problems with your elliptical, please reference the troubleshooting guide listed below.
IMPORTANT
PRECAUTIONS
PROBLEM: The console does not light up.
1.2E SOLUTION:
• Replace the batteries. The batteries are located in a compartment on the underside of the console.
2.2E SOLUTION: Verify the following:
ASSEMBLY
• The outlet the machine is plugged into is functional. Double check that the breaker has not tripped.
• The correct adapter is being used. Only use the adapter provided or authorized by Horizon Fitness.
• The adapter is not pinched or damaged and is properly plugged into the outlet AND the machine.
• The power switch is turned to the ON position (may not apply to all models).
• Turn off the machine and unplug power cord. Remove the console and check that all connections to the console
are secure and not damaged or pinched.
PROBLEM: The console lights up but the Time/RPM’s do not count.
1.2E SOLUTION: Verify the following:
BEFORE
YOU BEGIN
• Remove the console and check that all connections to the console are secure and not damaged or pinched.
• If doing the above does not fix the problem, the speed sensor and/or magnet may have become dislodged or
damaged.
2.2E SOLUTION: Verify the following:
ELLIPTICAL
OPERATION
• Turn off machine and unplug power cord. Remove the console and check that all connections to the console are
secure and not damaged or pinched.
• If doing the above does not fix the problem, the speed sensor and/or magnet may have become dislodged or
damaged.
PROBLEM: The resistance levels seem to be incorrect, seeming too hard or too easy.
1.2E SOLUTION: Verify the following:
• Check assembly of the resistance knob (assembly step 7, page 11). Make sure all connections are properly secured.
2.2E SOLUTION: Verify the following:
CONDITIONING
GUIDELINES
• The correct adapter is being used. Only use the adapter provided or authorized by Horizon Fitness.
• Reset the console and allow the resistance to reset to the default position. Restart and retry the resistance levels.
PROBLEM: The roller wheels appear to be leaving particles on the guide rails.
SOLUTION: This is considered normal wear of the elliptical wheels.
To remove, simply wipe off the roller wheels and guide rails with a damp cloth.
TROUBLESHOOTING
& MAINTENANCE
PROBLEM: The elliptical makes a squeaking or chirping noise.
SOLUTION: Verify the following:
• The elliptical is on a level surface.
• Loosen all bolts attached during the assembly process, grease the threads, and tighten again.
LIMITED
WARRANTY
30
INTRODUCTION
HEART RAT E T R O U B L E S H O O T I N G
IMPORTANT
PRECAUTIONS
PROBLEM: There is no heart rate reading.
SOLUTION: Remove the console and verify that the heart rate cables are attached properly, making
sure that the cables are securely inserted into the console.
Check your exercise environment for sources of interference such as high power lines, large motors, etc.
YOU MAY EXPERIENCE AN ERRATIC READOUT UNDER THE FOLLOWING CONDITIONS:
BEFORE
YOU BEGIN
ASSEMBLY
• Gripping the heart rate handlebars too tight. Try to maintain moderate pressure while holding onto the
heart rate handlebars.
• Constant movement and vibration due to constantly holding the heart rate grips while exercising.
• When you are breathing heavily during a workout.
• When your hands are constricted by wearing a ring.
• When your hands are dry or cold. Try moistening your palms or rubbing them together to warm.
• Anyone with heavy arrhythmia.
• Anyone with arteriosclerosis or peripheral circulation disorder.
• Anyone whose skin on the measuring palms is especially thick.
NOTE: Outside interference sources such as computers, motors and fluorescent lights may cause the heart rate
reading to be erratic.
If the above troubleshooting section does not remedy the problem, discontinue use and turn the power off.
ELLIPTICAL
OPERATION
CALL CUSTOMER TECH SUPPORT AT THE NUMBER ON THE BACK PANEL.
WHEN YOU ARE NEAR THE EQUIPMENT
CONDITIONING
GUIDELINES
The following information may be asked of you when you call. Please have these items readily available:
• Model Name
• Serial Number
• Date of Purchase (receipt or credit card statement)
In order for Customer Tech Support to service your elliptical they may need to ask detailed questions about the
symptoms that are occurring. Some troubleshooting questions that may be asked are:
Answering these and other questions will give the technicians the ability to send proper replacement parts and
the service necessary to get you and your Horizon Fitness elliptical running again!
31
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
• How long has this problem been occurring?
• Does this problem occur with every use? With every user?
• If you are hearing a noise, does it come from the front, back or inside? What kind of noise is it (thumping,
grinding, squeaking, chirping etc.)?
• If you are having a resistance problem, what is occurring? Is the resistance always too hard or too easy?
Does the resistance respond when pushing the buttons on the console? Does the resistance constantly cycle
through the levels during the workout?
• Has the machine been maintained per the maintenance schedule?
• Does the problem occur when using the handlebars? Without using the handlebars?
INTRODUCTION
CO M M O N P R O D U CT Q U E S T I O N S
IMPORTANT
PRECAUTIONS
ARE THE SOUNDS MY ELLIPTICAL MAKES NORMAL?
ASSEMBLY
Our ellipticals are some of the quietest available because they use belt drives and friction free magnetic
resistance. We use the highest grade bearings and belts to minimize noise. However, because the resistance
system itself is so quiet, you will occasionally hear other slight mechanical noises. Unlike older, louder
technologies, there are no fans, friction belts, or alternator noises to mask these sounds on our ellipticals.
These mechanical noises, which may or may not be intermittent, are normal and are caused by the transfer
of significant amounts of energy to a rapidly spinning flywheel. All bearings, belts and other rotating parts
will generate some noise which will transmit through the casing and frame. It is also normal for these
sounds to change slightly during a workout and over time because of thermal expansion of the parts.
WHY IS THE ELLIPTICAL I HAD DELIVERED LOUDER THAN THE ONE AT THE STORE?
BEFORE
YOU BEGIN
All fitness products seem quieter in a large store showroom because there is generally more background
noise than in your home. Also, there will be less reverberation on a carpeted concrete floor than on a wood
overlay floor. Sometimes a heavy rubber mat will help reduce reverberation through the floor. If a fitness
product is placed close to a wall, there will be more reflected noise.
HOW LONG WILL THE DRIVE BELT LAST?
The computer modeling we have done indicated virtually thousands of maintenance free hours. Belts are
now commonly used in far more demanding applications such as motorcycle drives.
ELLIPTICAL
OPERATION
CAN I MOVE THE TRAINER EASILY ONCE IT IS ASSEMBLED?
Your elliptical has a pair of transport wheels built into the front legs. It is easy to move your elliptical by
rolling it on the front transport wheels. It is important that you place your elliptical in a comfortable and
inviting room. Your elliptical is designed to use minimal floor space. Many people will place their ellipticals
facing the TV or a picture window. If at all possible, avoid putting your elliptical in a unfinished basement.
To make exercise a desirable daily activity for you, the elliptical should be in a comfortable setting.
CONDITIONING
GUIDELINES
CAN I PEDAL BACKWARDS ON MY ELLIPTICAL?
Your elliptical allows you to pedal both forward and backwards to exercise and strengthen a wider range
of muscles.
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
32
INTRODUCTION
MA I N T E N A N C E
IMPORTANT
PRECAUTIONS
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our ellipticals so lubrication is not needed. The most important
maintenance step is to simply wipe your perspiration off the trainer after each use.
HOW DO I CLEAN MY ELLIPTICAL?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
ASSEMBLY
Cleanliness of your elliptical and its operating environment will keep maintenance problems
and service calls to a minimum. For this reason, Horizon Fitness recommends that the following
preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
To remove power from the elliptical, the power cord must be disconnected from
the wall outlet.
ELLIPTICAL
OPERATION
WARNING
BEFORE
YOU BEGIN
Turn off the elliptical by unplugging the power cord from the wall outlet
• Wipe down the elliptical with a damp cloth. Never use solvents, as they can cause damage to the
elliptical.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
• Make sure the power cord is not underneath the elliptical or in any other area where it can become
pinched or cut.
WEEKLY
CONDITIONING
GUIDELINES
Clean underneath the elliptical, following these steps:
• Turn off the elliptical
• Move the elliptical to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
elliptical.
• Return the elliptical to its previous position.
EVERY MONTH
33
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
• Inspect all assembly bolts and pedals on the machine for proper tightness.
• Clean any debris off of the pedal arm wheels and guide rails.
INTRODUCTION
L I M I T E D H O M E-USE WARRANTY
IMPORTANT
PRECAUTIONS
FRAME • LIFETIME
Horizon Fitness warrants the frame
against defects in workmanship and
materials for the lifetime of the original
owner.
BRAKE • LIFETIME
Horizon Fitness warrants the brake
against defects in workmanship and
materials for the lifetime of the original
owner.
ASSEMBLY
BEFORE
YOU BEGIN
2.2E:
ELECTRONICS & PARTS • 2 YEARS
Horizon Fitness warrants the electronic
components and all original parts for
a period of two years from the date of
original purchase, so long as the device
remains in the possession of the original
owner.
ELLIPTICAL
OPERATION
1.2E:
ELECTRONICS & PARTS • 1 YEAR
Horizon Fitness warrants the electronic
components and all original parts for
a period of one year from the date of
original purchase, so long as the device
remains in the possession of the original
owner.
CONDITIONING
GUIDELINES
2.2E:
LABOR • 1 YEAR
Horizon Fitness shall cover the labor cost
for the repair of the device for a period
of one year from the date of the original
purchase, so long as the device remains
in the possession of the original owner.
TROUBLESHOOTING
& MAINTENANCE
1.2E:
LABOR • 6 MONTHS
Horizon Fitness shall cover the labor cost
for the repair of the device for a period of
six months from the date of the original
purchase, so long as the device remains
in the possession of the original owner.
LIMITED
WARRANTY
34
EXCLUSIONS AND LIMITATIONS
Who IS covered:
• The original owner and is not transferable.
What IS covered:
• Repair or replacement of a defective motor, electronic component, or defective
part and is the sole remedy of the warranty.
What IS NOT covered:
• Normal wear and tear, improper assembly or maintenance, or installation of
parts or accessories not originally intended or compatible with the equipment
as sold.
• Damage or failure due to accident, abuse, corrosion, discoloration of paint
or plastic, neglect, theft, vandalism, fire, flood, wind, lightning, freezing, or
other natural disasters of any kind, power reduction, fluctuation or failure from
whatever cause, unusual atmospheric conditions, collision, introduction of
foreign objects into the covered unit, or modifications that are unauthorized or
not recommended by Horizon Fitness.
• Incidental or consequential damages. Horizon Fitness is not responsible or
liable for indirect, special or consequential damages, economic loss, loss of
property, or profits, loss of enjoyment or use, or other consequential damages of
whatsoever nature in connection with the purchase, use, repair or maintenance
of the product.
• Equipment used for commercial purposes or any use other than a single family
or Household, unless endorsed by Horizon Fitness for coverage.
• Equipment owner or operated outside the US and Canada.
• Delivery, assembly, installation, setup for original or replacement units or labor
or other costs associated with removal or replacement of the covered unit.
• Any attempt to repair this equipment creates a risk of injury. Horizon Fitness is
not responsible or liable for any damage, loss or liability arising from any personal
injury incurred during the course of, or as a result of any repair or attempted
repair of your fitness equipment by other than an authorized service technician.
All repairs attempted by you on your fitness equipment are undertaken AT YOUR
OWN RISK and Horizon Fitness shall have no liability for any injury to the person
or property arising from such repairs.
SERVICE/RETURNS
• In-home service is available only within 150 miles of the nearest authorized
repair center.
• All returns must be pre-authorized by Horizon Fitness.
• Horizon Fitness’ obligation under this warranty is limited to replacing or
repairing, at Horizon Fitness’ option, the product at one of its authorized service
centers.
• A Horizon Fitness authorized service center must receive all products for which
a warranty claim is made. These products must be received with all freight
and other transportation charges prepaid, accompanied by sufficient proof of
purchase.
• Parts and electronic components reconditioned to As New Condition by Horizon
Fitness or its vendors may sometimes be supplied as warranty replacement parts
and constitute fulfillment of warranty terms.
• This warranty gives you specific legal rights, and your rights may vary from
state to state.
C U S T O M ER TECH SUPPORT
If you have any questions or comments, you may contact one of our
trained customer technicians via phone, email or our website.
Customer Tech Support Hotline: 1 - 8 0 0 - 2 44 - 4 1 9 2
Email: comments@horizonfitness.com
Website: www.horizonfitness.com
Customer Tech Support hours: Monday - Friday, 8 am - 5 pm CST (excluding holidays)
Note: Please read the troubleshooting section before contacting Customer Tech Support.
DO NOT return the product to the store.
800 Burton Blvd
DeForest, WI 53532
Tel: 1.800.244.4192
Fax: 608.842.1660
Elite 1.2E, 2.2E Elliptical Rev. 1.2 2005 Horizon Fitness Products | Designed & Engineered in the U.S.A. | Made in China
Download PDF
Similar pages