USB audio system for SMART Board 600 and 800 series interactive

Specifications
USB audio system for SMART Board® 600 and 800
series interactive whiteboards
Model SBA
Overview
The USB audio system for SMART Board® 600 and 800 series interactive whiteboards connects to a
computer through a USB cable, and includes a powered USB hub. It can be used with SMART Board 600 and
800 series interactive whiteboards without a SMART projector. The USB audio system also includes an
integrated powered USB hub with two USB connectors.
See smarttech.com for more information on this product.
Dimensions and weights
Dimensions
5 1/8" (13 cm)
Weight (both speakers)
12 lb. 7 oz. (5.6 kg)
4" (10.2 cm)
With brackets added
14 lb. 3 oz. (6.4 kg)
24" (61 cm)
Shipping size
12 3/4" W × 8" H × 26 1/2" D
(32.4 cm × 20.3 cm × 67.3 cm)
Dual RCA
(to the external audio)
Molex connector
(to the left speaker)
Volume control
Power indicator
USB A (to the
interactive whiteboard)
Power
USB B
(to the computer)
USB A receptacles
Front view
Right side view
Shipping weight
19 lb. (8.6 kg)
All dimensions ± 1/8" (0.3 cm).
All weights ± 2 lb. (0.9 kg).
Bottom view
(active speaker)
Standard features
Mounting brackets
Color
Attach the speakers directly to a SMART Board interactive whiteboard or wall-mount them.
l
l
Volume control
Connectivity
Light gray (approximates PANTONE® Cool Gray 4 C).
Matches the SMART UF70 projector and the SMART Board M600 series interactive
whiteboard.
A large volume dial is on the front of the right speaker.
l
USB 2.0 receptacles on the right speaker to connect a USB drive or USB peripherals
l
Dual RCA receptacles on the right speaker to connect a projector or external audio sources
smarttech.com/kb/001092
1
SPECIFICATIONS
USB AUDIO SYSTEM FOR SMART BOARD 600 AND 800 SERIES INTERACTIVE WHITEBOARDS – MODEL SBA
Frequency range
50 Hz to 20 kHz ± 6 dB
Output
Provides a comfortable listening volume in rooms up to 1,000 sq. ft. (93 sq. m) in size, with a
30-person capacity (subject to room acoustics).
Maximum output
14 W RMS when both channels are driven simultaneously and no other USB devices are
attached to the USB hub (not including the SMART Board interactive whiteboard).
Optimal output
10 W RMS when both channels are driven simultaneously and up to two other low- or
high-powered USB devices are interfaced with the USB hub.
Connection panel
Polarized Molex® connector with 25' (7.6 m) of 16 AWG wire
Power
Powered barrel connector (15 V DC, 4 A)
USB A
Connects to your interactive whiteboard
USB B
Connects to your computer
Dual RCA
Connects to your projector or an external audio source such as a VCR or DVD/Blu-ray™ player
USB device support
Powered USB 2.0 hub.
Power requirements
Switching power supply (100V–240V AC, 50 Hz–60 Hz, 1.5A) and a 6' (1.8 m) country specific
power cord (15V DC, 4000 mA, 60 VA, positive tip)
Operating specifications 41°F to 95°F (5°C to 35°C) with up to 80% humidity, non-condensing
Certification and compliance
Regulatory certification
UL (Canada/U.S.), CE, FCC, IC, C-Tick
Environmental
compliance
China EIP; EU RoHS, REACH, Packaging and WEEE; U.S. Packaging and Conflict Materials
Purchasing information
Order number
SBA
USB audio system for SMART Board 600 and 800 series interactive whiteboards
Optional accessories
See smarttech.com/accessories
Warranty
One-year limited equipment warranty
smarttech.com/support
smarttech.com/contactsupport
© 2010–2014 SMART Technologies ULC. All rights reserved. SMART Board, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of
SMART Technologies ULC in the U.S. and/or other countries. All third-party product and company names may be trademarks of their respective owners. This product and/or use thereof
covered by one or more of the following U.S. patents. www.smarttech.com/patents. Contents are subject to change without notice. 05/2014.
2
smarttech.com/kb/001092
Download PDF
Similar pages