LEARN
MORE
BackBeat™ 903+
Bluetooth® Headphones
TAKE A GOOD LOOK
CALL BUTTON
• Take a call or end it (1 tap)
• Redial (2 taps)
• Initiate phone’s voice-dialing (2-second
press until tone is heard)
• Reconnect lost Bluetooth connection (1 tap if the headphones don’t automatically
reconnect)
• Cancel missed call LED (1 tap)
• Reject a call (2-second press)
• Transfer call to/from phone (during call, 2-second press)
• Enable/disable Online Indicator (while
powered on, 2-second press Call and
Volume Up buttons)
MICRO USB CHARGING PORT
• Use with the AC wall charger:
1 hour before first use
3 hours (100% charge)
• Do not use headphones while charging
VOLUME/TRACKING BUTTONS
• Volume Up/Down (1 tap per level change)
• Track Forward/Back (2-second press per
track change)
• Enable/Disable OpenMic™ (3-second press
Call and Volume Down buttons)
LED
-
+
• Charging (solid red)
• Fully charged (brief solid blue flash)
• Low battery (2 red flashes every
15 minutes)
• On a call (blue flash every 2 seconds)
• Missed call (3 purple flashes repeating
for 5 minutes or until cancelled)
• Pairing mode (repeating red/blue
flashes)
MUSIC BUTTON
• Play/Pause (1 tap)
• Bass Boost (2-second press)
• Mute Music or Call (1 tap)
• Use OpenMic™ to pause music and activate mic (1 tap)
POWER/PAIRING BUTTON
• On/Off (2-second press to turn
on, 4-second press to turn off)
• Activate pairing mode after initial set up (press until
red/blue LED flashes)
• Check battery level (1 tap)
Be safe! Please read the safety guide
before using your new headphones.
CONNECT TO YOUR PHONE
PLT_BB903+
Pairing is a one-time process
unless your phone loses the
connection or you want to
pair to a new phone.
1. READY
2. SET
3. CONNECT
Activate the Bluetooth feature
on your device, then get it to
add / search for / discover new
Bluetooth devices.
First time, right out of the box:
Select “PLT_BB903+” from the list
of Bluetooth devices shown on
your device.
Phones have different menus to select from:
iPhone: Settings > General >
Bluetooth > On
(starts the search for devices)
BlackBerry® smartphone: Settings/options >
Bluetooth: On >
Search for devices
VIDEO TUTORIAL IN USA:
www.plantronics.com/pairing
With headphones turned off,
activate Bluetooth pairing mode
by pressing Power/Pairing button
on. The LED flashes red/blue to
indicate pairing mode.
If device asks for a passcode, enter
four zeros (0000). You may see
**** on screen.
Pairing new phone/reconnecting
original:
Some devices also ask to confirm
connection after pairing.
With headphones turned off, press
Power/Pairing button until the LED
flashes red/blue.
The headphone’s LED will stop
flashing red/blue once successfully paired/connected.
You can now make a call using
your device’s keypad or voicedialing feature.
ADJUST THE FIT
For the best sound performance and a secure, comfortable
fit, be sure to adjust the headphones to rest gently in your
ear and drape around the back of your neck.
1. Drape the stereo cable behind your neck.
2. Guide one earpiece behind your ear and secure the
eartip inside your ear using the telescoping/swivel
adjustments.
3. Repeat step 2 with the other earpiece and continue
to adjust the fit in each ear until both eartips rest
comfortably and securely in your ears.
LISTEN TO THE VOICE
These headphones whisper various
status alerts when you power on/off,
run low on listening time, or lose/
reconnect the Bluetooth connection
to your phone.
WHAT YOU’LL HEAR
Listening Time: (5 hrs, 4 hrs, 3 hrs, 2 hrs, 1 hr)
Battery Low
Recharge Battery
Connected
Incoming Call
Track Forward/Back
Mute On
Mute Off
Lost Connection
WHEN YOU’LL HEAR IT
After 2-second press of the Power button to turn on
power or after a short press during music play
When you have approximately 30 minutes left before
the battery must be recharged
When you have approximately 10 minutes left before
the battery must be recharged
After pressing the Power button to turn on power or to
recon­nect a dropped Bluetooth connection
As an incoming call rings to your phone
After 2-second press of either track forward + or track
backward - button
After tapping the Music button during a call
When on mute during a call, after tapping the Music
button
When the phone loses the Bluetooth connection with
the headphones
TIPS
Check the Battery Level:
Make Calls With Voice Dialing:
If you are on a call or listening to
Your headphones can work with
music and hear 3 high tones then
your phone’s voice dialing feature.
you have under 10 minutes of listenPress the Call button for 2 seconds
ing time remaining.
and listen for the low tone. Your phone
may prompt you by saying something
At other times, you can check the
like “Name Please.” Check your phone’s
battery level by tapping the Power
documentation for details.
button. The headphones will say
how many hours of useage remain.
Hear What’s Going On Around You:
The LED also flashes red to show
Your headphones use the OpenMicTM
the battery level.
feature to pause the music when you
1 flash = more than 2/3 full
want to hear your surroundings or
2 flashes = 1/3 - 2/3 full
have a quick chat with someone near3 flashes = less than 1/3 full
by. To use this feature, tap the Music
button once, then tap it again when
you are finished and want to resume
music play.
To disable this feature, press the Call
and Volume Down buttons for 3 seconds (you will hear a low-high-low set
of tones). To re-enable it, press the Call
and Volume Down buttons for 3 seconds (you will hear a high-low-high set
of tones).
Stay Near Your Device:
Bluetooth has a working “range” of
up to 33 feet between the device and
headphones before audio degrades
and the connection is lost. For best
audio reception, keep your device on
the left side of your body.
Know How to Reconnect:
Your headphones try to reconnect
a lost Bluetooth connection. If they
can’t, then tap the Call button once
or manually reconnect via the device’s
Bluetooth menu.
SPECIFICATIONS
Talk/Listening Time
Up to 7 hours
Standby Time
Up to 7 days
Operating Distance (Range)
Up to 33 feet from device
Headphones Weight
34 grams
Headphones Dimensions
L x W x H = 330 mm x 20 mm (at widest point of
earpiece) x 57 mm
Charge Connector
Micro USB charging
Battery Type
Rechargeable, non-replaceable Lithium ion polymer
Charge Time (Maximum)
3 hours
Power Requirements
5V DC – 180 mA
Bluetooth Version
2.1 + Enhanced Data Rate (EDR) and eSCO data packet
transfer
Bluetooth Profiles
Supports Advanced Audio Distribution (A2DP), Audio/
Video Remote Control (AVRCP), Hands-free (HFP) v1.5
and Headset (HSP) v1.1
Operating, Storage and Charging Temperature
32°F - 104°F (0°C - 40°C)
NEED MORE HELP?
Phone support in USA:
1-866-363-BLUE (2583)
1-year limited warranty details:
www.plantronics.com/warranty
© 2011 Plantronics, Inc. All Rights Reserved. Plantronics, BackBeat and OpenMic
are trademarks or registered trademarks of Plantronics, Inc. Bluetooth is a registered
trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. iPhone is
a trademark of Apple, Inc., registered in the U.S. and other countries. Blackberry is the
property of Research In Motion Limited and is registered and/or used in the U.S. and
countries around the world. All other trademarks are the property of their respective
owners. Patents US D619561; China ZL200930192537.2; EM 001142582-002; Taiwan
D135150; Patents Pending AM84445-01 (03/11)
Z109
N10687
Download PDF
Similar pages