READ ME
ANATOMY OF YOUR
MUSE HEADBAND
1
2
3
4
5
5 FOREHEAD SENSORS
5 LED LIGHTS
POWER BUTTON
2 CHARGING PORTS
2 SmartSense™ CONDUCTIVE RUBBER EAR SENSORS
1
2
3
5
5
2
4
4
BEFORE YOU START
STEP
1
Turn on Bluetooth
Find the Bluetooth menu under
your device’s settings. Make sure
Bluetooth is turned on.
STEP
2
Press and hold the headband’s
power button for 6 seconds
PRESS
6 sec
Look for all
five lights to
start blinking
on and off
together.
TAP
TAP
1 sec
With the headband’s
power off, press and
hold its power button
for 6 full seconds
until all five lights are
blinking on and off
together.
STEP 3
3
STEP
3
Tap Muse in the
Bluetooth menu
Tap Muse in your list of Bluetooth devices. If it’s not
there, try turning Bluetooth off and on again. It may
take a minute for Muse to pair with your device.
S
ES
PR
ec
1s
ec
6s
S
ES
PR
ec
1s
ec
6s
P
TA
P
TA
P
TA
P
TA
You only need to pair Muse once!
4
Once Muse is paired with your device, it will connect
automatically. Try it now! Press and hold the power
button for 1 second to turn it off. Then press and hold
the button for 1 second again to turn it on again. It will
automatically connect after a few seconds.
STEP
4
Download the Calm app
If your device doesn’t prompt you to download and
install the app, browse to
choosemuse.com/download
and you’ll be redirected to the Apple App Store or
Google Play Store depending on your device.
Great job!
Muse is set up and ready for everyday use.
5
EVERYDAY USE
STEP
1
STEP
2
STEP
3
6
Press and hold
the button for
1 second to turn
on the headband.
It will automatically
connect to a paired
device.
Launch the app.
Calm and settle
your mind.
PRESS
6 sec
TAP
TAP
1 sec
UNDERSTANDING
THE LIGHTS
Five Blinking Lights
The headband is looking to pair
with a new device (for pairing
instructions, see page 3).
Single Scanning Light
The headband is trying to
connect with a device it has
been connected to before.
Five Solid Lights
The headband is paired and
connected to your device.
7
POWERING MUSE
Turning Muse On & Off
Charging Muse
PRESS
6 sec
1 sec
TAP
TAP
Press and hold the button
until the lights turn on/off,
then release.
Use the included charging
cable with either port to
charge Muse.
PRESS
Checking the Battery
6 sec Level
1 sec
TAP
Almost
Empty
TAP
8
Tap the power button to
display the battery level.
Fully
Charged
TROUBLESHOOTING
Muse won’t connect with my device
Most connection problems can be solved by first
“forgetting” or “unpairing” Muse in your device’s bluetooth
menu. Then, make sure to read this guide in detail and
follow all steps on pages 3 and 4 in the correct order.
On step 2, make sure to hold the headband’s power
button for 6 full seconds to put in pairing mode. Note
that Muse cannot be paired or used when plugged in.
If the steps above don’t work, try a hard reset of the
headband. With the power off, press and hold the
headband’s power button for 15 seconds until the lights
begin flashing in an alternating pattern. When you
release the button, the headband will reset itself to
default settings.
I can’t install the app
Open the browser on your mobile device and direct it
to choosemuse.com/download. If it doesn’t work, open
the Apple App Store or the Google Play Store and
search for “Muse Calm” to find the app manually.
9
PROPER CARE OF MUSE
Do not get Muse wet,
or submerge in water
or other liquids.
Do not expose the
headband to extremely
high or extremely low
temperatures.
Do not open, disassemble
or attempt repair.
10
Avoid dropping Muse,
and protect it from
sudden impact.
Prolonged exposure
to sunlight may cause
discoloration of some
parts. Protect Muse from
sunlight when not in use.
Muse is flexible, but should be
protected against excessive
bending to prevent damage.
11
Technical Support is available on our website
choosemuse.com/support
You can also give us a call at
1-888-508-MUSE
choosemuse.com
Download PDF
Similar pages