INSTRUCTIONS FOR #81387 MOUNTING PLATE
INSTRUCTIONS FOR #81387 MOUNTING PLATE
The #81387 Saw Mounting Plate may be used to mount
the following saws to the edge of your workbench:
#60514 MicroLux Multi-Saw, #50304 MicroLux 2" Table Saw
and #80463 Tilt Arbor Table Saw.
The #81387 Saw Mounting Plate may be used to mount
the following saws to the edge of your workbench:
#60514 MicroLux Multi-Saw, #50304 MicroLux 2" Table Saw
and #80463 Tilt Arbor Table Saw.
Fig. A
Fig. A
To mount either the #60514
MicroLux Multi-Saw or the
#50304 MicroLux 2" Table
Saw, use the 3 long screws
and washers provided to
attach the plate to the
bottom of the saw housing,
as shown in Figure A.
Fig. B
To mount the #80463 Tilt Arbor
Table Saw, use the four short
screws provided to attach the
plate to the bottom of the saw
housing, as shown in Figure B.
To mount either the #60514
MicroLux Multi-Saw or the
#50304 MicroLux 2" Table
Saw, use the 3 long screws
and washers provided to
attach the plate to the
bottom of the saw housing,
as shown in Figure A.
Fig. B
To mount the #80463 Tilt Arbor
Table Saw, use the four short
screws provided to attach the
plate to the bottom of the saw
housing, as shown in Figure B.
When mounting the saw to your work bench, be sure to turn the
clamping screws just enough to secure the bracket and saw.
Over-tightening the screws may distort the bracket.
When mounting the saw to your work bench, be sure to turn the
clamping screws just enough to secure the bracket and saw.
Over-tightening the screws may distort the bracket.
If the edge of your workbench is very thin, put a small shim strip
under the workbench top so that the clamps can secure the
bracket properly.
If the edge of your workbench is very thin, put a small shim strip
under the workbench top so that the clamps can secure the
bracket properly.
THE SMALL TOOL SPECIALISTS
340 Snyder Avenue, Berkeley Heights, NJ 07922
Tech Support: 908-464-1094, weekdays, 1pm to 5 pm ET
www.micromark.com MMTechService@micromark.com
THE SMALL TOOL SPECIALISTS
340 Snyder Avenue, Berkeley Heights, NJ 07922
Tech Support: 908-464-1094, weekdays, 1pm to 5 pm ET
www.micromark.com MMTechService@micromark.com
MM010405
MM010405
Download PDF
Similar pages