TC7PZ17FU
CMOS Digital Integrated Circuits
Silicon Monolithic
TC7PZ17FU
1. Functional Description
•
Dual Schmitt Buffer
2. Features
(1)
AEC-Q100 (Rev. H) (Note 1)
(2)
Wide operating temperature range: Topr = -40 to 125  (Note 2)
(3)
High output current: ±24 mA (min) at VCC = 3.0 V
(4)
Super high speed operation: tpd = 3.7 ns (typ.) at VCC = 5.0 V, CL = 50 pF
(5)
Operation voltage range: VCC = 1.65 to 5.5 V
(6)
5.5 V tolerant inputs
(7) 5.5 V power down protection output
Note 1: This device is compliant with the reliability requirements of AEC-Q100. For details, contact your Toshiba sales
representative.
Note 2: For devices with the ordering part number ending in J(CT. Topr = -40 to 85  for the other devices.
3. Packaging
US6
Start of commercial production
©2017
Toshiba Electronic Devices & Storage Corporation
1
2010-03
2017-12-05
Rev.3.0
TC7PZ17FU
4. Marking and Pin Assignment
Marking
Pin Assignment (Top view)
5. IEC Logic Symbol
6. Truth Table
A
Y
L
L
H
H
7. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 )
Characteristics
Symbol
Note
Rating
Unit
Supply voltage
VCC
-0.5 to 6.0
V
Input voltage
VIN
-0.5 to 6.0
V
(Note 1)
-0.5 to 6.0
V
(Note 2)
-0.5 to VCC + 0.5
DC output voltage
VOUT
Input diode current
IIK
Output diode current
IOK
-20
mA
-20
mA
DC output current
VCC/ground current
IOUT
±50
mA
ICC
±100
mA
(Note 3)
Power dissipation
PD
200
mW
Storage temperature
Tstg
-65 to 150

Note:
Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 1: VCC = 0 V
Note 2: High (H) or Low (L) state. IOUT absolute maximum rating must be observed.
Note 3: VOUT < GND
©2017
Toshiba Electronic Devices & Storage Corporation
2
2017-12-05
Rev.3.0
TC7PZ17FU
8. Operating Ranges (Note)
Characteristics
Supply voltage
Symbol
Note
VCC
(Note 1)
Input voltage
VIN
Output voltage
VOUT
Operating temperature
Topr
(Note 2)
Rating
Unit
1.65 to 5.5
V
1.5 to 5.5
0 to 5.5
V
0 to 5.5
V
(Note 3)
0 to VCC
(Note 4)
-40 to 125
(Note 5)
-40 to 85

Note:
The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
Note 1: Data retention only
Note 2: VCC = 0 V
Note 3: High (H) or Low (L) state.
Note 4: For devices with the ordering part number ending in J(CT.
Note 5: For devices except those with the ordering part number ending in J(CT.
©2017
Toshiba Electronic Devices & Storage Corporation
3
2017-12-05
Rev.3.0
TC7PZ17FU
9. Electrical Characteristics
9.1. DC Characteristics (Unless otherwise specified, Ta = 25 )
Characteristics
Positive threshold voltage
Negative threshold voltage
Hysteresis voltage
High-level output voltage
Low-level output voltage
Symbol
Test Condition
VP

VN

VH
VOH
VOL

VIN = VP
VIN = VN
VCC (V)
Min
Typ.
Max
Unit
1.65
0.6
1.0
1.4
V
1.8
0.7
1.1
1.5
2.3
1.0
1.4
1.8
3.0
1.3
1.75
2.2
4.5
1.9
2.45
3.1
5.5
2.2
2.9
3.6
1.65
0.2
0.5
0.8
1.8
0.25
0.55
0.9
2.3
0.4
0.75
1.15
3.0
0.6
1.0
1.5
4.5
1.0
1.43
2.0
5.5
1.2
1.7
2.4
1.65
0.1
0.48
0.9
1.8
0.15
0.54
1.0
2.3
0.25
0.65
1.1
3.0
0.4
0.77
1.2
4.5
0.6
1.01
1.5
5.5
0.7
1.18
1.7
1.65
1.55
1.65

1.8
1.7
1.8

2.3
2.2
2.3

3.0
2.9
3.0

4.5
4.4
4.5

IOH = -4 mA
1.65
1.29
1.52

IOH = -8 mA
2.3
1.9
2.15

IOH = -16 mA
3.0
2.4
2.8

IOH = -24 mA
3.0
2.3
2.68

IOH = -32 mA
4.5
3.8
4.2

IOL = 100 µA
1.65

0.0
0.1
1.8

0.0
0.1
2.3

0.0
0.1
3.0

0.0
0.1
4.5

0.0
0.1
IOL = 4 mA
1.65

0.08
0.24
IOL = 8 mA
2.3

0.1
0.3
IOL = 16 mA
3.0

0.15
0.4
IOL = 24 mA
3.0

0.22
0.55
IOH = -100 µA
IOL = 32 mA
V
V
V
V
4.5

0.22
0.55
Input leakage current
IIN
VIN = 5.5 V or GND
0 to 5.5


±1
µA
Power-OFF leakage
current
IOFF
VIN or VOUT = 5.5 V
0


1
µA
Quiescent supply current
ICC
VIN = 5.5 V or GND
1.65 to 5.5


1
µA
©2017
Toshiba Electronic Devices & Storage Corporation
4
2017-12-05
Rev.3.0
TC7PZ17FU
9.2. DC Characteristics (Unless otherwise specified, Ta = -40 to 85 )
Characteristics
Positive threshold voltage
Negative threshold voltage
Hysteresis voltage
High-level output voltage
Low-level output voltage
Input leakage current
Symbol
Test Condition
VP

VN

VH
VOH
VOL

VIN = VP
IOH = -100 µA
VIN = VN
VCC (V)
Min
Max
Unit
1.65
0.6
1.4
V
1.8
0.7
1.5
2.3
1.0
1.8
3.0
1.3
2.2
4.5
1.9
3.1
5.5
2.2
3.6
1.65
0.2
0.8
1.8
0.25
0.9
2.3
0.4
1.15
3.0
0.6
1.5
4.5
1.0
2.0
5.5
1.2
2.4
1.65
0.1
1.0
1.8
0.15
1.0
2.3
0.25
1.1
3.0
0.4
1.2
4.5
0.6
1.5
5.5
0.7
1.7
1.65
1.55

1.8
1.7

2.3
2.2

3.0
2.9

4.5
4.4

IOH = -4 mA
1.65
1.29

IOH = -8 mA
2.3
1.9

IOH = -16 mA
3.0
2.4

IOH = -24 mA
3.0
2.3

IOH = -32 mA
4.5
3.8

IOL = 100 µA
1.65

0.1
1.8

0.1
2.3

0.1
3.0

0.1
4.5

0.1
IOL = 4 mA
1.65

0.24
IOL = 8 mA
2.3

0.3
IOL = 16 mA
3.0

0.4
IOL = 24 mA
3.0

0.55
IOL = 32 mA
4.5

0.55
V
V
V
V
IIN
VIN = 5.5 V or GND
0 to 5.5

±10
µA
Power-OFF leakage current
IOFF
VIN or VOUT = 5.5 V
0

10
µA
Quiescent supply current
ICC
VIN = 5.5 V or GND
1.65 to 5.5

10
µA
©2017
Toshiba Electronic Devices & Storage Corporation
5
2017-12-05
Rev.3.0
TC7PZ17FU
9.3. DC Characteristics (Note) (Unless otherwise specified, Ta = -40 to 125 )
Characteristics
Positive threshold voltage
Negative threshold voltage
Hysteresis voltage
High-level output voltage
Low-level output voltage
Input leakage current
Symbol
Test Condition
VP

VN

VH
VOH
VOL

VIN = VP
IOH = -100 µA
VIN = VN
VCC (V)
Min
Max
Unit
1.65
0.6
1.4
V
1.8
0.7
1.5
2.3
1.0
1.8
3.0
1.3
2.2
4.5
1.9
3.1
5.5
2.2
3.6
1.65
0.2
0.8
1.8
0.25
0.9
2.3
0.4
1.15
3.0
0.6
1.5
4.5
1.0
2.0
5.5
1.2
2.4
1.65
0.1
1.0
1.8
0.15
1.0
2.3
0.25
1.1
3.0
0.4
1.2
4.5
0.6
1.5
5.5
0.7
1.7
1.65
1.55

1.8
1.7

2.3
2.2

3.0
2.9

4.5
4.4

IOH = -4 mA
1.65
0.95

IOH = -8 mA
2.3
1.7

IOH = -16 mA
3.0
2.2

IOH = -24 mA
3.0
2.0

IOH = -32 mA
4.5
3.4

IOL = 100 µA
1.65

0.1
1.8

0.1
2.3

0.1
3.0

0.1
4.5

0.1
IOL = 4 mA
1.65

0.7
IOL = 8 mA
2.3

0.45
IOL = 16 mA
3.0

0.6
IOL = 24 mA
3.0

0.8
IOL = 32 mA
4.5

0.8
V
V
V
V
IIN
VIN = 5.5 V or GND
0 to 5.5

±20
µA
Power-OFF leakage current
IOFF
VIN or VOUT = 5.5 V
0

100
µA
Quiescent supply current
ICC
VIN = 5.5 V or GND
1.65 to 5.5

100
µA
Note:
For devices with the ordering part number ending in J(CT.
©2017
Toshiba Electronic Devices & Storage Corporation
6
2017-12-05
Rev.3.0
TC7PZ17FU
9.4. AC Characteristics (Unless otherwise specified, Ta = 25 , Input: tr = tf = 3 ns)
Characteristics
Propagation delay time
Symbol
Note
tPLH,tPHL
Test
Condition
VCC (V)
CL (pF)
Min
Typ.
Max
Unit
RL = 1 MΩ
1.8 ± 0.15
15
ns
RL = 500 Ω
2.0
9.1
15.0
2.5 ± 0.2
1.0
5.0
9.0
3.3 ± 0.3
1.0
3.7
6.3
5.0 ± 0.5
0.5
3.1
5.2
1.5
4.4
7.2
0.5
3.7
5.9
3.3 ± 0.3
50
5.0 ± 0.5
Input capacitance
CIN
Power dissipation
capacitance
CPD
(Note 1)
ns

0 to 5.5


4

pF

3.3


24

pF

30

5.5
Note 1: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current
consumption without load. Average operating current can be obtained by the equation.
ICC(opr) = CPDVCCfIN + ICC/2 (per gate)
9.5. AC Characteristics
(Unless otherwise specified, Ta = -40 to 85 , Input: tr = tf = 3 ns)
Characteristics
Propagation delay time
Symbol
Test Condition
VCC (V)
CL (pF)
Min
Max
Unit
tPLH,tPHL
RL = 1 MΩ
1.8 ± 0.15
15
ns
RL = 500 Ω
2.0
15.6
2.5 ± 0.2
1.0
9.5
3.3 ± 0.3
1.0
6.5
5.0 ± 0.5
0.5
5.5
1.5
7.5
0.8
6.2
3.3 ± 0.3
50
5.0 ± 0.5
ns
9.6. AC Characteristics (Note)
(Unless otherwise specified, Ta = -40 to 125 , Input: tr = tf = 3 ns)
Characteristics
Propagation delay time
Symbol
Test Condition
VCC (V)
CL (pF)
Min
Max
Unit
tPLH,tPHL
RL = 1 MΩ
1.8 ± 0.15
15
ns
RL = 500 Ω
2.0
17.5
2.5 ± 0.2
1.0
10.5
3.3 ± 0.3
1.0
7.5
5.0 ± 0.5
0.5
6.5
1.5
8.5
0.8
7.0
3.3 ± 0.3
5.0 ± 0.5
Note:
50
ns
For devices with the ordering part number ending in J(CT.
©2017
Toshiba Electronic Devices & Storage Corporation
7
2017-12-05
Rev.3.0
TC7PZ17FU
Package Dimensions
Unit: mm
Weight: 0.007 g (typ.)
Package Name(s)
JEDEC: SOT-363
Nickname: US6
©2017
Toshiba Electronic Devices & Storage Corporation
8
2017-12-05
Rev.3.0
TC7PZ17FU
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as "TOSHIBA".
Hardware, software and systems described in this document are collectively referred to as "Product".
• TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's
written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible
for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which
minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage
to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate
the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA
information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the
precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application
with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,
including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating
and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample
application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation,
equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles,
trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices,
elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR
UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales
representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any
intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products
(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and
regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration
Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all
applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
©2017
Toshiba Electronic Devices & Storage Corporation
9
2017-12-05
Rev.3.0
Download PDF
Similar pages