Datasheet: MicroScanner² Update
Datasheet: MicroScanner² Update
For more than a decade, cabling
installation and maintenance
technicians have relied on
MicroScanner to verify terminations
and troubleshoot continuity faults. A
lot has changed in the cabling world
since the original MicroScanner was
introduced. Industry economics
require that installations be done
fast and accurately with no
callbacks. And converging voice,
data, and video technologies have
given rise to new requirements for
service testing and multimedia
support.
MicroScanner2 Cable Verifier
Raising cable verification to a higher power
MicroScanner2 recognizes these
trends the way testing is done. It
streamlines every aspect of the
verification job. From its time-saving
user interface and integrated
multimedia support to its expanded
service detection capabilities,
MicroScanner2 gives technicians the
power to perform their jobs faster
and more accurately than ever.
Reduce test time and user error
High power vision to verify
voice/data/video cabling and
services. That’s Fluke Networks’
promise to you.
Eliminate awkward test adapters
Yesterday’s cable verification testers force users to toggle between different modes
(up to four) to view all test results. This not only slows the test process, but also
causes user frustration and error. MicroScanner2 has defied this convention by
displaying key test results – wiremap, pair lengths, distance to fault, cable ID, and
far-end devices – all on one screen.
Tired of losing or breaking all the adapters needed for testing the various voice, data,
and video media types? MicroScanner2 makes these adapters things of the past with
builtin RJ11, RJ45, and coax support. Both the main unit and the far-end identifiers
can be used to test telephone jacks, Ethernet jacks, and CATV outlets right out of the
box.
Rule out service problems fast
Today’s communications technicians have more problems to deal with than just the
cabling. They have to rule out a whole host of cable and service issues before
determining the cause of a connectivity problem. Is there telephone voltage? What’s
the polarity? Is there a switch at the far end? Is PoE available? MicroScanner2 gives
technicians high power vision to verify today’s most common voice, data, and video
services.
1 of 5
Locate elusive cables in seconds
MicroScanner2 features built-in IntelliTone digital and analog toning to precisely locate virtually any cable or wire pair, regardless of
work environment. Use digital mode to locate high-grade data cabling (Cat 5e/6/6a) in bundles, or at switches, patch panels, or wall
outlets. Or, use analog mode on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring.
Repair or replace tools less often
With all the abuse you put your tools through, you can’t afford for them to be delicate. MicroScanner2 features a rubber wrap-around
holster that makes it the right tool for even the toughest jobs. Toss it into your toolbox. Drop it from a ladder. It can handle it. Plus, it
now comes standard with a vinyl carry pouch for enhanced protection and convenience.
MicroScanner2 Cable Verifier
Ordering Information
Model
Description
MS2-100
MicroScanner2 Cable Verifier with main wiremap adapter,
multi-language Getting Started Guide, batteries, and Fluke
Networks carry pouch
MS2-KIT
The MicroScanner2 Professional Kit
Includes MicroScanner2, Cable Verifier with main wiremap
adapter, IntelliTone™ Pro 200 Probe, Remote Identifiers
#2-7, patch cords (shielded RJ45, RJ11, coax), multilanguage Getting Started Guide, batteries, Magnetic Strap
Attachment, and deluxe Fluke Networks carry case
MS2-TTK
The MicroScanner2 Termination Test Kit
Includes MicroScanner2 Cable Verifier with main wiremap
adapter, IntelliTone™ Pro Probe, IS60 Pro-Tool™ Kit,
multi-language Getting Started Guide, batteries, Magnetic
Strap Attachment, and deluxe Fluke Networks carry case
MS2-FTK
Includes MicroScanner2 Cable Verifier with main wiremap
adapter, Simplifiber Pro optical power meter, 850/1300
multimode source, SC power-meter adapter, multilanguage Getting Started Guide, batteries, Magnetic Strap
Attachments and carrying case
Accessories
Description
MS2-IDK27
MicroScanner2 Remote Identifier Kit #2-7
MT-8200-63A
IntelliTone Pro 200 Probe
CLIP-SET
RJ45 to 8 – Clip MT-8200-63A Test Lead
CIQ-RJA
RJ45/11 Modular Adapter
CIQ-COAX
Coax Adapter Kit for RCA, BNC
MICRO-DIT
MicroScanner2 Kit Soft Carry Duffel
MS2-MAG-KIT
Magnetic Strap Attachment and Spare Holster
Specifications and availability subject to change
2 of 5
MS2-KIT
MS2-TTK
Copper and Fiber Basic Technician's Kit
As project requirements grow to include both copper and fiber cabling, the
Copper and Fiber Basic Technician's Kit (MS2-FTK) provides the right set
of tools to manage your network and keep it running smoothly. Along with
the features of the Microscanner2, the MS2-FTK provides the fiber testing
instruments needed to: Quickly verify optical loss and power levels with
single-port simultaneous dual wavelength testing over six
wavelengths(850, 1300, 1310, 1490, 1550, 1625)
Conduct efficient cable routing identification with SimpliFiber Pro’s
FindFiber® capability
Save up to 1000 test results and upload and manage them on your
personal computer via Fluke Networks’ popular LinkWare Cable
Test Management Software
Track intermittent power fluctuations with the Min/Max feature
MS2-FTK
3 of 5
Specifications
Test Connectors
Twisted-pair: UTP, FTP, SSTP 8-pin modular jack accepts RJ45 and RJ11 Coax: F-connector for 75 Ω, 50 Ω, 93 Ω cables
Cable Tests
Tests for open circuits, short circuits, cross-wired pairs, wiremap to TIA-568A/B standards, remote ID locators
Length Measurement
Length (up to 460 meters or 1,500 feet) using Time Domain Reflectometry (TDR) Technology
Tone Generator
IntelliTone digital tone: [500 KHz]; analog tones:[400Hz, 1KHz]
PoE Detection
Solicits and detects the presence of 802.3af compatible PoE devices
Ethernet Port Test
Advertised speed of 802.3 Ethernet ports (10/100/1000)
Power Source
Battery type: 2 AA alkaline batteries
Dimensions
3 in x 6.4 in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)
Weight
13 ounces; 363 grams (batteries included)
Warranty
One year
M12/ RJ45 Cable Specifications:
Cable type
Ethernet cable, Cat5e, 6, 6a, shielded, 2 Pair AWG 26 stranded (7 wire), RAL 5021 (water blue), M12 4 pos. D- coded on RJ45 connector
Number of positions
4
Fixed cable length
2m
Volume resistance
≤ 5 mΩ
Insulation resistance
≥ 100 MΩ
Ambient temperature
-20 oC to 50 oC
Inflammability class acc to UL 94
V0
Surge voltage category
II
Pollution degree
3
Degree of protection
IP20/IP67
External cable diameter
6.7 mm
Transmission characteristics
Cat 5 (IEC 11801:2002), Cat 5e (TIA 568B:2001)
4 of 5
Simplifiber Pro Specifications (included in MS2-FTK)
General Specifications:
Temperature range
Operating: -10°C to 50°C
Storage: -20°C to 50°C
Humidity range
95% (10°C to 35°C) non-condensing;
75% (35°C to 40°C) non-condensing;
uncontrolled <10°C
Certifications
CE, CSA, N10140, Class 1 laser-safe
Dimensions
Power meter: 6.4 in x 3.2 in x 1.5 in (16.5 cm x 8.0 cm x 3.9 cm)
MM/SM sources: 5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1 cm)
Weight
Power meter: 11.5 oz (325 g)
MM/SM sources: 9.8 oz (278 g)
Optical Sources
Optical output connector
Fixed SC
Emitter type
850/1300: LED
1310/1550: FP Laser
FindFiber: Laser
Emitter wavelengths
CE, CSA, N10140, Class 1 laser-safe
Power output (minimum)
MM: ≥ -20 dBm
SM: ≥ 8 dBm minimum;
-7 dBm nominal
Power output stability
(8 hours)
MM: +/- 0.1 dB over 8 hours
SM: +/- 0.25 dB over 8 hours
MM battery life
(2 x AA IEC LR6)
40 hours typical
SM battery life
(2 x AA IEC LR6)
30 hours typical
FindFiber battery life
(2 x AA IEC LR6)
80 hours typical
Optical Power Meter
Power measurement accuracy
+/-0.25 dB
Optical connector
Removable adapter; SC adapter standard;
Optional adapters include LC, ST
Detector type
InGaAs
Calibrated wavelengths
850, 1300, 1310, 1490, 1550, 1625
Power measurement linearity
850 nm: +/- 0.2 dB; +/- 0.2 dB for power from 0 dBm to -45 dBm, +/- 0.25 dB for power < -45 dBm; 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625
nm: +/- 0.1 dB;
+/- 0.1 dB for power from 0 dBm to -55 dBm, +/- 0.2 dB for power > 0 dBm and <-55 dBm
Resolution
0.01 dB
Battery life
>50 hours typical
Memory
1000 loss or power measurements
Serial communication physical interface
USB
Fluke Networks operates in more than 50 countries worldwide.
To find your local office contact details, go to www.flukenetworks.com/contact.
© 2018 Fluke Corporation. Rev: 01/02/2018 8:17 am (Literature Id: 2798526)
5 of 5
Download PDF
Similar pages