2018 Jeep MP/JL/BU Uconnect 3 w/5" Display

UCONNECT 3 WITH 5 INCH DISPLAY
18UC35RF-526-AB
Second Edition
Uconnect 3 with 5" Display
Printed in the USA
©2017 FCA US LLC. All Rights Reserved.
Chrysler, Dodge, Jeep, Ram, Mopar and Uconnect are trademarks of FCA US LLC.
FIAT is a registered trademark of FCA Group Marketing S.p.A.,
used under license by FCA US LLC.
SECTION
TABLE OF CONTENTS
PAGE
1
SAFETY AND GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1
2
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2
3
RADIO MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3
4
MEDIA MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4
5
PHONE MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5
6
VOICE RECOGNITION QUICK TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6
SAFETY AND GENERAL INFORMATION
CONTENTS
䡵 SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . . .4
䡵 GENERAL INFORMATION . . . . . . . . . . . . . . . . . .6
▫ Safe Usage Of The Uconnect System . . . . . . . . . . .4
▫ External Audio Sources . . . . . . . . . . . . . . . . . . . .6
▫ Care And Maintenance . . . . . . . . . . . . . . . . . . . .5
▫ FCC Declaration . . . . . . . . . . . . . . . . . . . . . . . . .6
1
4 SAFETY AND GENERAL INFORMATION
SAFETY GUIDELINES
WARNING!
ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume
all risks related to the use of the Uconnect features
and applications in this vehicle. Only use Uconnect
when it is safe to do so. Failure to do so may result
in an accident involving serious injury or death.
Ensure that all persons read this manual carefully before
using the system. It contains instructions on how to use the
system in a safe and effective manner.
Do NOT attach any object to the touchscreen, doing so
can result in damage to the touchscreen.
Please read and follow these safety precautions. Failure to
do so may result in injury or property damage.
• Glance at screen only when safe to do so. If prolonged
viewing of the screen is required, park in a safe location
and set the parking brake.
• Stop use immediately if a problem occurs. Failure to do
so may cause injury or damage to the product. Return it
to an authorized dealer to repair.
• Ensure the volume level of the system is set to a level
that still allows you to hear outside traffic and emergency vehicles.
Safe Usage Of The Uconnect System
• Read all instructions in this manual carefully before
using your system to ensure proper usage!
• Your system is a sophisticated electronic device. Do not
let young children use your system.
• Permanent hearing loss may occur if you play your
music or the system at loud volumes. Exercise caution
when setting the volume on your system.
• Keep drinks, rain and other sources of moisture away
from your system. Besides damage to your system,
moisture can cause electric shocks as with any electronic
device.
NOTE: Many features of this system are speed dependent.
For your own safety, it is not possible to use some of the
touchscreen features while the vehicle is in motion.
SAFETY AND GENERAL INFORMATION 5
Exposure To Radio Frequency Radiation
The internal wireless radio operates within guidelines
found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. The radio manufacturer believes the internal wireless radio is safe for use by consumers. The level of energy
emitted is far less than the electromagnetic energy emitted
by wireless devices such as mobile phones. However, the
use of wireless radios may be restricted in some situations
or environments, such as aboard airplanes. If you are
unsure of restrictions, you are encouraged to ask for
authorization before turning on the wireless radio.
Care And Maintenance
Touchscreen
• Do not press the touchscreen with any hard or sharp
objects (pen, USB stick, jewelry, etc.) which could scratch
the touchscreen surface!
• Do not spray any liquid or caustic chemicals directly on
the screen! Use a clean and dry micro fiber lens cleaning
cloth in order to clean the touchscreen.
• If necessary, use a lint-free cloth dampened with a
cleaning solution, such as isopropyl alcohol or an isopropyl alcohol and water solution ratio of 50:50. Be sure
to follow the solvent manufacturer’s precautions and
directions.
Disc Drive — If Equipped
• Do not insert any damaged, warped, scratched or dirty
Discs into the Disc Player.
• Discs that have been modified with an adhesive label
should not be used in the Disc Player.
• Do not insert more than one Disc at a time into the drive
slot.
1
6 SAFETY AND GENERAL INFORMATION
FCC Declaration
NOTE:
General Information
• The system supports only FAT32-formatted USB devices. For optimal results, devices 64GB or lower is
recommended for support.
The following regulatory statement applies to all Radio
Frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and
with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
NOTE: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user’s authority to operate the equipment.
GENERAL INFORMATION
External Audio Sources
Other electronic devices (e.g. iPod, PDA, etc.) can be used
on the car. Some of them may cause electromagnetic
interference however. Disconnect these devices if the system performance worsens.
• The system does not support USB hubs connected with
the USB port of the car. Connect your multimedia device
directly to the USB port, using the specific connection
cable for the device if necessary.
INTRODUCTION
CONTENTS
䡵 UCONNECT 3 WITH 5-INCH DISPLAY SYSTEM . . .8
▫ Identifying Your Radio. . . . . . . . . . . . . . . . . . . . .8
▫ Uconnect 3 System Without Integrated Center
Stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
▫ Uconnect Settings . . . . . . . . . . . . . . . . . . . . . . .10
2
8 INTRODUCTION
UCONNECT 3 WITH 5-INCH DISPLAY SYSTEM
Identifying Your Radio
Key Features:
• 5” Touchscreen
• Three buttons on either side of the display
• Hands-free/Bluetooth
Uconnect 3 System Without Integrated Center
Stack
1 — RADIO
Push the RADIO button on the faceplate to enter Radio
Mode. The different tuner modes; FM/AM/SW/LW/
MW/DAB/DAB+ (if equipped), can be selected by pressing the corresponding buttons on the touchscreen in Radio
Mode.
2 — COMPASS
Push the COMPASS button on the faceplate to display the
current direction of the vehicle.
INTRODUCTION 9
3 — SETTINGS
7 — MUTE
Push the SETTINGS button on the faceplate to display the
customer programmable features.
Push the MUTE button to turn off the audio of the radio
system. Press it again to turn the audio back on.
4 — MORE
8 — VOLUME/POWER
Push the MORE button on the faceplate to access additional options.
Rotate the rotary knob to adjust the Volume. Push the
VOLUME/POWER button to turn the system ON or OFF.
5 — ENTER/BROWSE & TUNE/SCROLL
9 — PHONE
Push the ENTER/BROWSE button to accept a highlighted
selection on the screen. Rotate the TUNE/SCROLL rotary
knob to scroll through a list or tune a radio station.
Push the PHONE button on the faceplate to access the
Uconnect Phone feature.
6 — SCREEN OFF
Pushing the MEDIA button on the faceplate will allow you
to switch to Media mode: CD (if equipped), USB/iPOD,
AUX, and Bluetooth.
Push the SCREEN OFF button to turn the touchscreen OFF.
To turn the touchscreen back ON, just press the screen.
10 — MEDIA
2
10 INTRODUCTION
Uconnect Settings
• Trailer Brake — If Equipped
Push the SETTINGS button on your faceplate, if one exists,
to display the Settings Main Menu. If not, push the MORE
button on the faceplate then the “Settings” button on your
touchscreen. The Settings Main Menu may contain the
following options:
• Compass Setting — If Equipped
• Display
• Units
• Voice Command
• Clock & Date
• Safety/Assistance
• Brakes
• Lights
• Doors & Locks
• Auto Comfort Systems — If Equipped
• Vehicle Off Options
• Suspension — If Equipped
• Audio
• Phone/Bluetooth
• Radio Setup — If Equipped
• Restore Settings
• Clear Personal Data
• System Information
Refer to “Uconnect Settings” in the Owner’s Manual for
further information.
RADIO MODE
CONTENTS
䡵 OPERATING RADIO MODE . . . . . . . . . . . . . . . . .12
▫ Direct Tune Functions . . . . . . . . . . . . . . . . . . . .13
▫ Switching The System ON/OFF . . . . . . . . . . . . .12
▫ SiriusXM Satellite Radio Mode — If Equipped . . .13
▫ Volume/Mute . . . . . . . . . . . . . . . . . . . . . . . . . .12
▫ Setting Presets . . . . . . . . . . . . . . . . . . . . . . . . . .14
▫ Tune/Scroll Control . . . . . . . . . . . . . . . . . . . . . .12
▫ Audio Settings. . . . . . . . . . . . . . . . . . . . . . . . . .15
▫ Seek Functions . . . . . . . . . . . . . . . . . . . . . . . . .13
▫ Clock Settings . . . . . . . . . . . . . . . . . . . . . . . . . .16
3
12 RADIO MODE
Push the RADIO button on the faceplate, to enter the Radio
Mode. The different tuner modes; FM/AM/SXM – If
Equipped, can then be selected by pressing the corresponding buttons on the touchscreen in the Radio mode.
OPERATING RADIO MODE
Switching The System ON/OFF
The screen will switch on/off when the power button is
pushed.
Volume/Mute
Rotate the VOLUME rotary knob to adjust the Volume.
When the audio system is turned on, the sound will be set
at the same volume level as last played.
1
2
3
4
— Station Presets
— All Presets
— SEEK Up
— Audio
5
6
7
8
— Info
— Tune
— AM/FM/SXM
— SEEK Down
The radio is equipped with the following modes:
• FM
• AM (SW/LW/MW – If Equipped)
• SiriusXM Radio – If Equipped
Push the MUTE button to mute the system. Push the
MUTE button again to unmute the system.
Tune/Scroll Control
Turn the rotary TUNE/SCROLL control knob clockwise to
increase or counterclockwise to decrease the radio station
frequency. Push the ENTER/BROWSE button to choose a
selection.
RADIO MODE 13
Seek Functions
Fast Seek Down
Seek Up
Press and hold the “Seek Down”
button on the touchscreen to advance the radio through the available stations or channel at a faster rate, the radio stops at the
next available station or channel when the button on the
touchscreen is released.
Press and release the “Seek Up”
button on the touchscreen to tune the radio to the next listenable station or
channel.
During a Seek Up function, if the radio reaches the starting
station after passing through the entire band two times, the
radio will stop at the station where it began.
Fast Seek Up
Press and hold the “Seek Up”
button on the touchscreen to advance the radio through the available stations or channels at a faster rate, the radio stops at the
next available station or channel when the button on the
touchscreen is released.
Seek Down
Press and release the “Seek Down”
button on the
touchscreen to tune the radio to the next listenable
station or channel.
During a Seek Down function, if the radio reaches the
starting station after passing through the entire band two
times, the radio will stop at the station where it began.
Direct Tune Functions
Press the “Tune” button on the touchscreen to directly tune
to a specific radio station. A keypad will appear. On the
keypad, enter in your desired radio station, and the system
will automatically tune to it.
SiriusXM Satellite Radio Mode — If Equipped
SiriusXM Satellite Radio uses direct satellite-to-receiver
broadcasting technology to provide clear, coast to coast
radio content. SiriusXM is a subscription based service.
3
14 RADIO MODE
Get over 160 channels on your satellite radio, and enjoy all
you want, all in one place. Hear commercial-free music
plus sports, news, talk and entertainment. Get all the
premium programming, including Howard Stern, every
NFL game, Oprah Radio, every MLB and NHL game, every
NASCAR race, Martha Stewart and more. And get 20+
extra channels, including SiriusXM Latino, offering
20 channels of commercial free music, news, talk, comedy,
sports and more dedicated to Spanish language programming.
SiriusXM services require subscriptions, sold separately
after the trial included with the new vehicle purchase. If
you decide to continue your service at the end of your trial
subscription, the plan you choose will automatically renew
and bill at then-current rates until you call SiriusXM at
1-866-635-2349 to cancel. See SiriusXM Customer Agreement for complete terms at www.siriusxm.com. All fees
and programming subject to change. Our satellite service is
available only to those at least 18 and older in the 48 contiguous USA and D.C. Our Sirius satellite service is also
available in PR (with coverage limitations). Our Internet
radio service is available throughout our satellite service
area and in AK and HI. © 2017 SiriusXM Radio Inc. Sirius,
XM and all related marks and logos are trademarks of
SiriusXM Radio Inc. Service available in Canada; see
www.siriusxm.ca.
This functionality is only available for radios equipped
with a Satellite receiver. To receive satellite radio, the
vehicle needs to be outside with a clear view to the sky.
If the screen displays Acquiring Signal, you may need to
change the vehicle’s position to receive a signal. In most
cases, the satellite radio does not receive a signal in
underground parking garages or tunnels.
Setting Presets
The Presets are available for all Radio Modes and are
activated by pressing any of the four “Preset” buttons on
the touchscreen, located at the top of the screen.
When you are receiving a station that you wish to commit
into memory, press and hold the desired numbered button
on the touchscreen for more that two seconds or until you
hear a confirmation beep.
The Radio stores up to 12 presets in each of the Radio
modes. Four presets are visible at the top of the radio
screen.
RADIO MODE 15
Audio Settings
1. Push the SETTINGS button on the right side of the radio
faceplate. If the settings button is not present, push the
MORE button on the faceplate then the “Settings”
button on the touchscreen.
2. Scroll down and press the “Audio” button on the
touchscreen to open the Audio menu.
3. The Audio Menu shows the following options for you to
customize your audio settings:
• Auto Play
— Press the “Auto Play” button on the touchscreen to
select between ON or OFF. This feature determines if
music automatically starts playing from a device when
it if first connected to the Media hubs USB port.
• Equalizer
— Press the “Equalizer” button on the touchscreen to
adjust the Bass, Mid and Treble. Use the “+” or “–”
buttons on the touchscreen to adjust the equalizer to
your desired settings. Press the “Back Arrow” button
on the touchscreen when done.
• Balance/Fade
— Press the “Balance/Fade” button on the touchscreen
to adjust the sound from the speakers. Use the “arrow”
button on the touchscreen to adjust the sound level
from the front and rear or right and left side speakers.
Press the Center “C” button on the touchscreen to reset
the balance and fade to the factory setting. Press the
“Back Arrow” button on the touchscreen when done.
• Speed Adjustable
— Press the “Speed Adjusted Volume” button on the
touchscreen to select between OFF, 1, 2 or 3. This will
decrease the radio volume relative to a decrease in
vehicle speed. Press the “Back Arrow” button on the
touchscreen when done.
• Loudness
— Press the “Loudness” button on the touchscreen to
select the Loudness feature. When this feature is activated it improves sound quality at lower volumes.
3
16 RADIO MODE
Clock Settings
1. If a SETTINGS button on the right side of faceplate
exists, push this button. If not, push the MORE button
on the faceplate then the “Settings” button on the
touchscreen.
2. Select the “Clock and Date” button on the touchscreen.
3. Next, select “Set Time” to change the time.
4. Select “Set Date” to change the date.
or “Seek
5. To set the time, select the “Seek Up”
arrows as appropriate. Select “12 hrs vs
Down”
24 hrs”, “AM” or “PM” or select the “Time Zones” (if
equipped).
6. Select “Done” when complete.
MEDIA MODE
CONTENTS
䡵 OPERATING MEDIA MODE . . . . . . . . . . . . . . . . .18
▫ Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
▫ Audio Source Selection. . . . . . . . . . . . . . . . . . . .18
䡵 IPOD/USB MODE . . . . . . . . . . . . . . . . . . . . . . . .20
▫ Seek Up/Seek Down . . . . . . . . . . . . . . . . . . . . .19
䡵 BLUETOOTH MODE . . . . . . . . . . . . . . . . . . . . . .20
▫ Track Selection (Browse) . . . . . . . . . . . . . . . . . . .19
䡵 AUX MODE. . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
▫ Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
䡵 DISC MODE — IF EQUIPPED . . . . . . . . . . . . . . . .21
▫ Shuffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
▫ Track Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
4
18 MEDIA MODE
OPERATING MEDIA MODE
Audio Source Selection
Once in Media Mode, press the “Source” button on the
touchscreen and the desired mode button on the touchscreen. Disc (if equipped), USB, SD Card (if equipped),
AUX and Bluetooth (if equipped), are the Media sources
available. When available, you can select the “Browse”
button on the touchscreen to be given these options:
• Now Playing
• Artists
• Albums
• Genres
1
2
3
4
— SEEK Down
— SEEK Up
— Additional Functions
— Info
5 — Pause/Play
6 — Source
7 — Browse
Media Mode is entered by pushing the MEDIA button
located on the faceplate.
• Songs
• Playlists
• Folders
You can press the “Source,” “Pause/Play” or the “Info”
button on the touchscreen for artist information on the
current song playing.
MEDIA MODE 19
Seek Up/Seek Down
Track Selection (Browse)
Seek Up
Press the “Browse” button on the touchscreen to scroll
through and select a desired track on the iPod, MP3 player,
phone, or USB. Press the “Exit” button on the touchscreen
if you wish to cancel the browse function.
/Seek Down
Press and release the “Right Arrow”
button on the
touchscreen for the next selection. Press and release the
button on the touchscreen to return to
“Left Arrow”
the beginning of the current selection, or return to the
beginning of the previous selection if the track is within
the first second of the current selection.
Fast Seek Up
Press and hold the “Right Arrow”
button on the
touchscreen and the desired mode will begin to fast
forward through the current track until the button on
the touchscreen is released.
Fast Seek Down
Press and hold the “Left Arrow”
button on the touchscreen and the desired mode will begin to rewind
through the current track until the button on the touchscreen is released.
Repeat
Press the “Repeat” button on the touchscreen to repeat the
song selection. To cancel repeat, press the “Repeat” button
on the touchscreen a second time.
Shuffle
Press the “Shuffle” button on the touchscreen to play the
selections on the USB/iPod device in random order to
provide an interesting change of pace. Press the “Shuffle”
button on the touchscreen a second time to turn this feature
off.
Track Info
Press the “Info” button on the touchscreen to display the
current track information. Press the “X” button on the
touchscreen to cancel this feature.
4
20 MEDIA MODE
Audio
Refer to “Operating Radio Mode” for the adjustable audio
settings.
IPOD/USB MODE
USB/iPod Mode is entered by either inserting a USB Jump
Drive or iPod cable into the USB port, or by pushing the
MEDIA button located on the faceplate. Once in Media
Mode, press the “Source” button on the touchscreen and
select “USB/iPod.”
on the touchscreen. Press the “Exit” button on the touchscreen if you wish to cancel the browse function.
BLUETOOTH MODE
Bluetooth Streaming Audio (BTSA) or Bluetooth Mode is
entered by pairing a Bluetooth device containing music to
the Uconnect system.
Before proceeding, the Bluetooth device must be paired
with the Uconnect Phone to communicate with the
Uconnect system.
Inserting USB/iPod Device
See the pairing procedure within this manual.
Gently insert the USB/iPod device into the USB Port. If you
insert a USB/iPod device with the ignition ON, the unit
will switch to USB/iPod mode and begin to play when you
insert the device. The display will show the track number
and index time in minutes and seconds. Play will begin at
the start of track 1.
Once the Bluetooth device is paired to the Uconnect
system, push the MEDIA button located on the faceplate.
Once in Media Mode, press the “Source” button on the
touchscreen and select “Bluetooth.”
Browse
Press the “Browse” button on the touchscreen to select
Artist, Albums, Genres, Songs, Playlists or Folders from the
USB/iPod device. Once the desired selection is made you
can chose from the available media by pressing the button
NOTE: For mobile phone compatibility and pairing instructions, please visit UconnectPhone.com.
MEDIA MODE 21
AUX MODE
DISC MODE — IF EQUIPPED
AUX Mode is entered by inserting a AUX device using a
stereo cable with a 3.5 mm audio jack into the AUX port, or
by pushing the MEDIA button located on the faceplate.
Once in Media Mode, press the “Source” button on the
touchscreen and select “AUX.”
Your vehicle may have a remote Disc player located in the
center console storage bin.
Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX Port.
If you insert a Auxiliary device with the ignition ON, the
unit will switch to AUX mode and begin to play when you
insert the device cable.
Controlling The Auxiliary Device
The control of the Auxiliary device (e.g., selecting playlists,
play, fast forward, etc.) cannot be provided by the radio;
use the device controls instead. Adjust the volume with the
VOLUME rotary knob, or with the volume of the attached
device.
The vehicle radio unit is acting as the amplifier for audio
output from the Auxiliary device. Therefore if the volume
control on the Auxiliary device is set too low, there will be
insufficient audio signal for the radio unit to play the music
on the device.
Disc Mode is entered by either inserting a CD/Disc or by
pushing the MEDIA button on the faceplate. Once in Media
Mode, press the “Source” button on the touchscreen and
select “Disc.”
Inserting Compact Disc
Gently insert one Disc into the Disc player with the Disc
label following the illustration indicated on the player. The
Disc will automatically be pulled into the Disc player and
the Disc icon will illuminate on the radio display. If a Disc
does not go into the slot more than 1.0 inch (2.5 cm), a Disc
may already be loaded and must be ejected before a new
Disc can be loaded.
If you insert a Disc with the ignition ON and the radio ON,
the unit will switch to Disc mode and begin to play when
you insert the Disc. The display will show the track
number and index time in minutes and seconds. Play will
begin at the start of track 1.
4
22 MEDIA MODE
Browse
Press the “Browse” button on the touchscreen to scroll
through and select a desired track on the Disc. Press the
“Exit” button on the touchscreen if you wish to cancel the
browse function.
Eject Button — Ejecting a Disc
Push the EJECT button to eject the Disc. If you have ejected
a Disc and have not removed it within ten seconds, it will
be reloaded. If the Disc is not removed, the radio will
reinsert the Disc but will not play it. A Disc can be ejected
with the radio and ignition OFF.
PHONE MODE
CONTENTS
䡵 OPERATING PHONE MODE . . . . . . . . . . . . . . . .24
▫ Phone Mode Activation . . . . . . . . . . . . . . . . . . .24
▫ Main Functions . . . . . . . . . . . . . . . . . . . . . . . . .25
▫ Connecting/Disconnecting A Mobile Phone Or
Bluetooth Device . . . . . . . . . . . . . . . . . . . . . . . .25
▫ Deletion Of A Mobile Phone Or A Bluetooth Audio
Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
▫ Setting A Mobile Phone Or A Bluetooth Audio
Device As Favorite. . . . . . . . . . . . . . . . . . . . . . .28
▫ Downloading A Phonebook From Your Mobile
Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
▫ Deletion Of Phone Data (Phonebook And Recent
Calls) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
▫ Making A Phone Call . . . . . . . . . . . . . . . . . . . . .29
▫ Answering An Incoming Call . . . . . . . . . . . . . . .30
▫ Managing Two Phone Calls . . . . . . . . . . . . . . . .31
▫ Transferring/Call Continuation . . . . . . . . . . . . . .31
▫ Ending A Call . . . . . . . . . . . . . . . . . . . . . . . . . .31
䡵 UCONNECT PHONE FEATURES . . . . . . . . . . . . .32
▫ Mute/Unmute. . . . . . . . . . . . . . . . . . . . . . . . . .32
▫ Reading Messages . . . . . . . . . . . . . . . . . . . . . . .32
5
24 PHONE MODE
OPERATING PHONE MODE
The Uconnect Phone is a voice-activated, hands-free, invehicle communications system with Voice Command Capability (see Voice Command section).
The Uconnect Phone allows you to dial a phone number
with your mobile phone using simple voice commands.
NOTE: The Uconnect Phone requires a mobile phone
equipped with the Bluetooth Hands-Free Profile. To check
mobile
phone
compatibility
please
visit
UconnectPhone.com.
For Uconnect customer support:
• U.S. residents - visit UconnectPhone.com or call
1-877-855-8400
1 — Call/Redial/Hold
2 — Phone Signal Strength
3 — Paired Phone
4 — Phone Battery Life
5 — Mute Microphone
6 — Transfer To/From Uconnect
System
7 — Uconnect Phone Settings
8 — Text Messaging
9 — Direct Dial Pad
10 — Recent Call Log
11 — Browse Phone Book (Contains 911)
12 — End Call
• Canadian residents - visit UconnectPhone.com or call
1-800-465-2001 (English) or 1-800-387-9983 (French)
Phone Mode Activation
Press the PHONE button on the front panel to activate the
Phone mode.
PHONE MODE 25
Main Functions
Connecting/Disconnecting A Mobile Phone Or
Bluetooth Device
The buttons on the display can be used to:
• Compose phone numbers (using the graphic keypad on
the display)
• Display and call the contacts on the mobile phone
phonebook
• Display and call contacts from the “recent calls” menu
• Pair up to ten phones/audio devices to make access and
connection easier and quicker
• Transfer calls from the system to the mobile phone and
vice versa
• Deactivate the
conversations
microphone
audio
for
private
The mobile phone audio is transmitted through the vehicle’s audio system. The system automatically mutes the
radio when the Phone function is used.
Pairing A Phone
To begin using your Uconnect Phone, you must pair your
compatible Bluetooth enabled mobile phone. Mobile phone
pairing is the process of establishing a wireless connection
between a cellular phone and the Uconnect system
To complete the pairing process, you will need to reference
your mobile phone Owner’s Manual. Please visit
UconnectPhone.com for complete mobile phone compatibility information.
NOTE:
• You must have Bluetooth enabled on your phone to
complete this procedure.
• The vehicle must be in PARK.
1. Place the ignition in the ACC or ON position.
5
26 PHONE MODE
2. Push the PHONE button on the faceplate.
• If there is no phones currently connected with the
system, a pop-up will appear asking if you would like
to pair a mobile phone.
6. Uconnect Phone will display an in progress screen while
the system is connecting.
3. Select “Yes” to begin the pairing process.
8. When prompted on the mobile phone, accept the connection request from Uconnect Phone.
• Some mobile phones will require you to enter the PIN
number.
4. Search for available devices on your Bluetooth enabled
mobile phone.
• Press the Settings button on your mobile phone.
• Select Bluetooth and ensure it is enabled. Once enabled, the mobile phone will begin to search for
Bluetooth connections.
5. If No is selected, and you still would like to pair a
mobile phone, press the “Settings” button from the
Uconnect Phone main screen.
• Select “Paired Phones” then press the “Add Device”
button on the touchscreen.
• Search for available devices on your Bluetooth enabled
mobile phone (see below). When prompted on the
phone, select “Uconnect” and accept the connection
request.
7. When your mobile phone finds the Uconnect system,
select “Uconnect.”
9. When the pairing process has successfully completed,
the system will prompt you to choose whether or not
this is your favorite phone. Selecting “Yes” will make
this phone the highest priority. This phone will take
precedence over other paired phones within range and
will connect to the Uconnect system automatically when
entering the vehicle. Only one mobile phone and/or one
Bluetooth audio device can be connected to the
Uconnect system at a time. If “No” is selected, simply
select “Uconnect” from the mobile phone/audio device
Bluetooth screen, and the Uconnect system will reconnect to the Bluetooth device. Phonebook Download —
Phonebook Transfer
PHONE MODE 27
Storing Names/Numbers in The Mobile Phone
Before pairing your mobile phone, you must make sure
you have stored the names you want to contact in the
phonebook on your mobile phone so that you can call them
using the vehicle’s hands-free system.
• Select the ⬙Paired Phones⬙ or ⬙Paired Audio⬙ list using
the corresponding button on the display
• Select the specific device (mobile phone or Bluetooth
device)
• Press the ⬙Connect⬙ button
If your phonebook does not contain any names, enter new
names for the most frequently used numbers.
• During the connection stage a screen is displayed showing the progress of the operation
For further details, consult your mobile phone owner’s
handbook.
• The device connected is highlighted in the list.
NOTE: The names in the phonebook which do not contain
phone numbers or where both fields (name and surname)
are empty will not be displayed.
Disconnection
Connection
• Access the Settings menu
The system connects automatically to the paired mobile
phone with the highest priority.
• Select ⬙Phone/Bluetooth⬙
To choose a specific mobile phone or Bluetooth audio
device, proceed as follows:
To disconnect a specific mobile phone or Bluetooth audio
device, proceed as follows:
• Select the ⬙Paired Phones⬙ or ⬙Paired Audio⬙ list using
the corresponding button on the display
• Access the Settings menu
• Select the specific device (mobile phone or Bluetooth
device)
• Select ⬙Phone/Bluetooth⬙
• Press the ⬙Disconnect⬙ button.
5
28 PHONE MODE
Deletion Of A Mobile Phone Or A Bluetooth Audio
Device
• Select the ⬙Paired Phones⬙ or ⬙Paired Audio⬙ list using
the corresponding button on the display
To delete a mobile phone or Bluetooth audio device from a
list, proceed as follows:
• Select the specific device (mobile phone or Bluetooth
device)
• Access the “Settings” menu
• Press the ⬙Make Favorite⬙ button;
• Select ⬙Phone/Bluetooth⬙
• The device selected is moved to the top of the list
• Select the ⬙Paired Phones⬙ or ⬙Paired Audio⬙ list using
the corresponding button on the display
Downloading A Phonebook From Your Mobile
Phone
• Select the device (mobile phone or Bluetooth device)
If equipped and specifically supported by your phone,
Uconnect Phone will ask you if you want to download
names (text names) and number entries from your mobile
phone’s phonebook. Specific Bluetooth Phones with Phone
Book Access Profile may support this feature. See
UconnectPhone.com for supported phones.
• Press the ⬙Delete Device⬙ button;
• A confirmation screen will appear on the display:
• Press ⬙Yes⬙ to delete the device
• Press ⬙No⬙ to cancel the operation
Setting A Mobile Phone Or A Bluetooth Audio
Device As Favorite
To set a mobile phone or Bluetooth audio device as
favorite, proceed as follows:
• Access the “Settings” menu
• Select ⬙Phone/Bluetooth⬙
NOTE:
• Download and update, if supported, begins as soon as
the Bluetooth wireless phone connection is made to the
Uconnect Phone, for example, after you start the vehicle.
• You may be asked for permission to initiate the phonebook download.
PHONE MODE 29
• A maximum of 2,000 contact names with six numbers
per contact will be downloaded and updated every time
a phone is connected to the Uconnect Phone.
• Depending on the maximum number of entries downloaded, there may be a short delay before the latest
downloaded names can be used. Until then, if available,
the previously downloaded phonebook is available for
use.
• Only the phonebook of the currently connected mobile
phone is accessible.
• Only the mobile phones phonebook is downloaded. SIM
card phonebook is not part of the Mobile phonebook.
• This downloaded phonebook cannot be edited or deleted on the Uconnect Phone. These can only be edited
on the mobile phone. The changes are transferred and
updated to Uconnect Phone on the next phone
connection.
Deletion Of Phone Data (Phonebook And Recent
Calls)
Select ⬙Delete Phone Data⬙ on the display to delete the list
of recent calls and the phonebook copy.
Making A Phone Call
Dialling The Phone Number Using The ⴖKeyboardⴖ Icon
On The Display
Enter the phone number using the graphic keypad displayed.
Proceed as follows:
1. Press the “Keyboard” icon on the display and use the
number buttons to enter the number.
2. Press the ⬙Call⬙ button to make a call.
Call By Saying A Phonebook Name Or Phone Number
1. Push the PHONE button on the steering wheel.
2. After the BEEP, say “dial” (or “call” a full name or
phone number).
5
30 PHONE MODE
Recent Calls
Redial
The list of the last calls made for each of the following call
types can be displayed:
To call the number/contact of last call made, press the
⬙Redial⬙ button.
• Calls received
Answering An Incoming Call
• Calls made
Call Controls
• Calls without a reply
The buttons on the display allow the following phone call
functions to be managed:
• All calls
To access these types of call, press the ⬙Recent Calls⬙ button
on the Phone menu main screen.
• Answer
• End
Making A Second Call While Current Call Is In Progress
• Ignore
When a phone conversation is active, a second phone call
can be made as follows:
• Put on hold/resume
• Select the number/contact from the list of recent calls.
• Select the contact from the phonebook.
• Press the ⬙Hold⬙ button and dial the number using the
graphic keyboard of the display.
• Deactivate/activate the microphone
• Transfer the call
• Switch from one call to the other
• Conference/merge two active calls
PHONE MODE 31
Answering Or Ignoring A Call With No Call Currently In
Progress
Transferring/Call Continuation
When an incoming call rings or is announced on Uconnect,
push the PHONE button.
The ongoing calls can be transferred from the mobile
phone to the system and vice versa without ending the call.
Answering Or Ignore An Incoming Call With A Call
Currently In Progress
To transfer the call, press the ⬙Transfer⬙ button.
When an incoming call rings or is announced on Uconnect,
push the PHONE button to answer the call and put the
ongoing call on hold.
NOTE: Not all mobile phones may support the management of an incoming call when another phone conversation
is active.
Managing Two Phone Calls
Transferring
Call Continuation
After the engine is switched off, it is still possible to
continue a phone call.
The call continues until it is ended manually or for a
maximum period of about 20 minutes.
When the system is switched off the call is transferred to
the mobile phone.
If two calls are in progress (one active and one on hold), it
is possible to switch between them pressing the ⬙Call On
Hold⬙ button or to merge the two calls in a conference
pressing the ⬙Merge calls⬙ button.
Ending A Call
NOTE: Check whether the telephone in use supports the
management of a second call and the ⬙Conference⬙ mode.
Only the ongoing call is ended and any call on hold
becomes the new active call.
Press the ⬙End⬙ button on the touchscreen or the PHONE
button on the steering wheel controls to end a call in
progress.
Depending on the type of mobile phone, if the ongoing call
is ended by the caller, the call on hold may not be activated
automatically.
5
32 PHONE MODE
UCONNECT PHONE FEATURES
Mute/Unmute
1. During a call, push the VOICE COMMAND button on
the steering wheel.
2. After the BEEP, say “mute” (or “mute off”).
Reading Messages
The system can read the messages received by the mobile
phone.
To use this function the mobile phone must support the
SMS exchange function via Bluetooth.
If this function is not supported by the phone, the corresponding message button is deactivated (greyed out) or
may only accept incoming messages.
When a text message is received, the display will show a
screen where the options ⬙Listen⬙, ⬙Call⬙ or ⬙Ignore⬙ can be
selected.
Press the message button to access the list of SMS messages
received by the mobile phone (the list displays a maximum
of 60 messages received).
VOICE RECOGNITION QUICK TIPS
CONTENTS
䡵 OPERATING VOICE RECOGNITION. . . . . . . . . . .34
▫ Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
▫ Introducing Uconnect. . . . . . . . . . . . . . . . . . . . .34
▫ Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
▫ How To Activate Voice Commands . . . . . . . . . . .34
▫ Voice Text Reply . . . . . . . . . . . . . . . . . . . . . . . .38
▫ Basic Voice Commands. . . . . . . . . . . . . . . . . . . .36
▫ General Information. . . . . . . . . . . . . . . . . . . . . .39
▫ Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
▫ Additional Information. . . . . . . . . . . . . . . . . . . .39
6
34 VOICE RECOGNITION QUICK TIPS
OPERATING VOICE RECOGNITION
WARNING!
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
related to the use of the Uconnect features and
applications in this vehicle. Only use Uconnect
when it is safe to do so. Failure to do so may result
in an accident involving serious injury or death.
Introducing Uconnect
Start using Uconnect Voice Recognition with these helpful
quick tips. It provides the key Voice Commands and tips
you need to know to control your Uconnect 3 system. Key
Features:
• 5” touchscreen
• Three buttons on either side of the display
How To Activate Voice Commands
1. Visit UconnectPhone.com to check mobile device and
feature compatibility and to find phone pairing instructions.
2. Reduce background noise. Wind and passenger conversations are examples of noise that may impact recognition.
3. Speak clearly at a normal pace and volume while facing
straight ahead. The microphone is positioned on the
rearview mirror and aimed at the driver.
VOICE RECOGNITION QUICK TIPS 35
4. Each time you give a Voice Command, you must first
push either the VR or PHONE button, wait until after
the beep, then say your Voice Command.
5. You can interrupt the help message or system prompts
by pushing the VR or PHONE button and saying a Voice
Command from current category.
All you need to control your Uconnect system with your
voice are the buttons on your steering wheel.
6
1 — Push To Initiate Or To Answer A Phone Call, Send Or Receive
A Text
2 — Push To Begin Radio Or Media Functions
3 — Push To End Call
1 — Push To Begin Radio Or Media Functions
2 — Push To Initiate, Answer/End A Phone Call, Send Or Receive
A Text
36 VOICE RECOGNITION QUICK TIPS
Basic Voice Commands
Radio
The basic Voice Commands below can be given at any
point while using your Uconnect system.
Use your voice to quickly get to the AM or FM radio
stations.
Push the VR button
. After the beep, say:
Push the VR button
. After the beep, say:
• “Cancel” to stop a current voice session
• “ Tune to ninety-five-point-five FM”
• “Help” to hear a list of suggested Voice Commands
• “ Tune to Satellite Hits 1”
• “Repeat” to listen to the system prompts again
TIP: At any time, if you are not sure of what to say or want
and say
to learn a Voice Command, push the VR button
“Help.” The system will provide you with a list of
commands.
Notice the visual cues that inform you of your voice
recognition system’s status. Cues appear on the touchscreen.
VOICE RECOGNITION QUICK TIPS 37
Media
Uconnect offers connections via USB, SD, Bluetooth and
Auxiliary ports (If Equipped). Voice operation is only
available for connected USB and iPod devices. (Remote CD
player optional and not available on all vehicles.)
. After the beep, say one of the
Push the VR button
following commands and follow the prompts to switch
your media source or choose an artist.
• “ Change source to Bluetooth”
• “ Change source to iPod”
• “ Change source to USB”
• “ Play artist Beethoven”; “ Play album Greatest Hits”; “
Play song Moonlight Sonata”; “ Play genre Classical”
TIP: Press the “Browse” button on the touchscreen to see
all of the music on your iPod or USB device. Your Voice
Command must match exactly how the artist, album, song
and genre information is displayed.
6
38 VOICE RECOGNITION QUICK TIPS
Phone
Making and answering hands-free phone calls is easy with
Uconnect. When the Phonebook button is illuminated on
your touchscreen, your system is ready. Check
UconnectPhone.com for mobile phone compatibility and
pairing instructions.
Push the PHONE button
the following commands:
. After the beep, say one of
• “ Call John Smith”
• “ Dial 123-456-7890 and follow the system prompts”
• “ Redial (call previous outgoing phone number)”
Voice Text Reply
• “ Call back (call previous incoming phone number)”
Uconnect will announce incoming text messages. Push the
and say Listen. (Must have compatPHONE button
ible mobile phone paired to Uconnect system.)
TIP: When providing a Voice Command, push the PHONE
and say “Call,” then pronounce the name
button
exactly as it appears in your phone book. When a
contact has multiple phone numbers, you can say “ Call
John Smith work.”
1. Once an incoming text message is read to you, push the
. After the beep, say... “Reply”
PHONE button
2. Listen to the Uconnect prompts. After the beep, repeat
one of the pre-defined messages and follow the system
prompts.
VOICE RECOGNITION QUICK TIPS 39
PRE-DEFINED VOICE TEXT REPLY
Yes.
Stuck in traffic.
No.
Start without
me.
Okay.
Where are you?
Call me.
Are you there
yet?
I’ll call you later.
I need directions.
I’m on my way.
Can’t talk right
now.
I’m lost.
RESPONSES
See you later.
I’ll be late.
1. This device may not cause harmful interference, and
I will be
<number>
minutes late.
NOTE: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user’s authority to operate the equipment.
See you in
<number> of
minutes.
Additional Information
Thanks.
TIP: Your mobile phone must have the full implementation
of the Message Access Profile (MAP) to take advantage of
this
feature.
For
details
about
MAP,
visit
UconnectPhone.com. Apple iPhone iOS6 or later supports
reading incoming text messages only.
General Information
The following regulatory statement applies to all Radio
Frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and
with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions
2. This device must accept any interference received, including interference that may cause undesired operation.
© 2017 FCA US LLC. All rights reserved. Mopar and
Uconnect are registered trademarks and Mopar Owner
Connect is a trademark of FCA US LLC. Android is a
trademark of Google Inc.
For Uconnect system support, visit DriveUconnect.com
(U.S. Residents) or DriveUconnect.ca (Canadian Residents).
6
UCONNECT 3 WITH 5 INCH DISPLAY
18UC35RF-526-AB
Second Edition
Uconnect 3 with 5" Display
Printed in the USA
©2017 FCA US LLC. All Rights Reserved.
Chrysler, Dodge, Jeep, Ram, Mopar and Uconnect are trademarks of FCA US LLC.
FIAT is a registered trademark of FCA Group Marketing S.p.A.,
used under license by FCA US LLC.
Download PDF
Similar pages