2018 Jeep Cherokee Uconnect 3C/3C NAV w/8.4" Display

RADIO 3C/3C NAV WITH 8.4 INCH DISPLAY
18UC3CN84-526-AB
Second Edition
Radio 3C/3C NAV with 8.4” Display
Printed in the USA
©2017 FCA US LLC. All Rights Reserved.
Chrysler, Dodge, Jeep, Ram, Mopar and Uconnect are trademarks of FCA US LLC.
FIAT is a registered trademark of FCA Group Marketing S.p.A.,
used under license by FCA US LLC.
DID_3057780_18a_UConnect_3C_C NAV_with_8.4_inch_Display_EN-US_061117.indd 1
9/7/17 4:00 PM
SECTION
TABLE OF CONTENTS
PAGE
1
SAFETY AND GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1
2
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2
3
RADIO MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3
4
MEDIA MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
4
5
PHONE MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5
6
NAVIGATION MODE — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
6
7
VOICE RECOGNITION QUICK TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
7
8
ALL ABOUT UCONNECT ACCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
8
SAFETY AND GENERAL INFORMATION
CONTENTS
䡵 SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . . .4
▫ 9-1-1 Call — If Equipped . . . . . . . . . . . . . . . . . .7
䡵 CYBERSECURITY . . . . . . . . . . . . . . . . . . . . . . . . .5
䡵 REMOTE SERVICE FEATURES . . . . . . . . . . . . . . .11
䡵 SECURITY FEATURES . . . . . . . . . . . . . . . . . . . . . .6
▫ Roadside Assistance — If Equipped . . . . . . . . . . .6
1
4 SAFETY AND GENERAL INFORMATION
SAFETY GUIDELINES
WARNING!
ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume
all risks related to the use of the Uconnect features
and applications in this vehicle. Only use Uconnect
when it is safe to do so. Failure to do so may result
in an accident involving serious injury or death.
Ensure that all persons read this manual carefully before
using the system. It contains instructions on how to use the
system in a safe and effective manner.
Please read and follow these safety precautions. Failure to
do so may result in injury or property damage.
• Glance at the screen only when safe to do so. If prolonged viewing of the screen is necessary, park in a safe
location and set the parking brake.
• Stop use immediately if a problem occurs. Failure to do
so may cause injury or damage to the product. Return it
to your authorized dealer for repair.
• Make certain that the volume level of the system is set to
a level that still allows you to hear outside traffic and
emergency vehicles.
Safe Usage of the Uconnect Access System
• Read all instructions in this manual carefully before
using your system to ensure proper usage!
• Your system is a sophisticated electronic device. Do not
let young children use your system.
• Permanent hearing loss may occur if you play your
music or the system at loud volumes. Exercise caution
when setting the volume on your system.
• Keep drinks, rain, and other sources of moisture away
from your system. Besides damage to your system,
moisture can cause electric shocks as with any electronic
device.
NOTE: Many features of this system are speed dependent.
For your own safety, it is not possible to use some of the
touchscreen features while the vehicle is in motion.
SAFETY AND GENERAL INFORMATION 5
Touchscreen
CYBERSECURITY
• Do NOT attach any object to the touchscreen, doing so
can result in damage to the touchscreen.
Your vehicle may be a connected vehicle and may be
equipped with both wired and wireless networks. These
networks allow your vehicle to send and receive information. This information allows systems and features in your
vehicle to function properly.
• Do not press the screen with any hard or sharp objects
(pen, USB stick, jewelry, etc.) which could scratch the
touchscreen surface!
• Do not spray any liquid or caustic chemicals directly on
the screen! Use a clean and dry micro fiber lens cleaning
cloth in order to clean the touchscreen.
• If necessary, use a lint-free cloth dampened with a
cleaning solution, such as isopropyl alcohol, or an
isopropyl alcohol and water solution ratio of 50:50. Be
sure to follow the solvent manufacturer’s precautions
and directions.
Disc Player — If Equipped
• Do not insert any damaged, warped, scratched or dirty
discs into the disc player.
• Discs that have been modified with an adhesive label
should not be used in the disc player.
• Do not insert more than one disc at a time into the disc
slot.
Your vehicle may be equipped with certain security features to reduce the risk of unauthorized and unlawful
access to vehicle systems and wireless communications.
Vehicle software technology continues to evolve over time
and FCA US LLC, working with its suppliers, evaluates
and takes appropriate steps as needed. Similar to a computer or other devices, your vehicle may require software
updates to improve the usability and performance of your
systems or to reduce the potential risk of unauthorized and
unlawful access to your vehicle systems.
The risk of unauthorized and unlawful access to your
vehicle systems may still exist, even if the most recent
version of vehicle software (such as Uconnect software) is
installed.
1
6 SAFETY AND GENERAL INFORMATION
WARNING!
• It is not possible to know or to predict all of the
possible outcomes if your vehicle’s systems are
breached. It may be possible that vehicle systems,
including safety related systems, could be impaired
or a loss of vehicle control could occur that may
result in an accident involving serious injury or
death.
• ONLY insert media (e.g., USB, SD card, or CD) into
your vehicle if it came from a trusted source. Media
of unknown origin could possibly contain malicious
software, and if installed in your vehicle, it may
increase the possibility for vehicle systems to be
breached.
• As always, if you experience unusual vehicle behavior, take your vehicle to your nearest authorized
dealer immediately.
www.driveuconnect.com/
• Routinely
check
software-update to learn about available Uconnect
software updates.
• Only connect and use trusted media devices (e.g.
personal mobile phones, USBs, CDs).
Privacy of any wireless and wired communications cannot
be assured. Third parties may unlawfully intercept information and private communications without your consent.
For further information, refer to “Onboard Diagnostic
System (OBD II) Cybersecurity” in your Owner’s Manual.
SECURITY FEATURES
Roadside Assistance — If Equipped
• FCA or your dealer may contact you directly regarding
software updates.
If your vehicle is equipped with this feature and within
cellular range, you may be able to connect to Roadside
Assistance, Uconnect Care and Vehicle Care by pressing
the “Assist” button on the Rearview Mirror of your vehicle.
To the extent any such calls incur additional costs, you are
responsible for them. If Roadside Assistance is provided to
your vehicle, you agree to be responsible for any additional
roadside assistance service costs that you may incur.
• To help further improve vehicle security and minimize
the potential risk of a security breach, vehicle owners
should:
To provide Uconnect Services to you, we may record and
monitor your conversations with Roadside Assistance,
Uconnect Care or Vehicle Care, whether such conversations
NOTE:
SAFETY AND GENERAL INFORMATION 7
are initiated through the Uconnect Services in your vehicle,
or via a landline or mobile telephone, and may share
information obtained through such recording and monitoring in accordance with regulatory requirements. You acknowledge, agree and consent to any recording, monitoring or sharing of information obtained through any such
call recordings.
9-1-1 Call — If Equipped
The 9-1-1 Call system is an embedded phone system that
allows you to connect to a 9-1-1 operator in an emergency.
You can choose to press the “9-1-1 Call” button on the
Rearview Mirror to contact a 9-1-1 operator.
9-1-1 Call Operating Instructions
2. The LED light on the Rearview Mirror will turn green
once a connection to a 9-1-1 operator has been made.
3. Once a connection between the vehicle and a 9-1-1
operator is made, the 9-1-1 Call system may transmit the
following important vehicle information to a 9-1-1 operator:
• Indication that the occupant placed a 9-1-1 Call.
• The vehicle brand.
• The last known GPS coordinates of the vehicle – if
equipped.
4. You should be able to speak with the 9-1-1 operator
through the vehicle audio system to determine if additional help is needed.
1. Push the “9-1-1 Call” button on the Rearview Mirror;
NOTE: In case the 9-1-1 Call button is pushed in error,
there will be a 10 second delay before the 9-1-1 Call system
initiates a call to a 9-1-1 operator. To cancel the 9-1-1 Call
connection, push the “9-1-1 Call” button on the Rearview
Mirror or press the “cancellation” button on the Phone
Screen. Termination of the 9-1-1 Call will turn the green
LED light on the Rearview Mirror off.
WARNING!
ALWAYS obey traffic laws and pay attention to the
road. Some Uconnect Access services, including 9-1-1
and Assist, will NOT work without an operable
1X(voice/data) or 3G(data) network connection.
1
8 SAFETY AND GENERAL INFORMATION
NOTE:
• Your vehicle may be transmitting data as authorized
by the subscriber.
• Once a connection is made between the vehicle’s 9-1-1
Call system and the 9-1-1 operator, the 9-1-1 operator
may be able to open a voice connection with the
vehicle to determine if additional help is needed. Once
the 9-1-1 operator opens a voice connection with the
vehicle’s 9-1-1 Call system, the operator should be able
to speak with you or other vehicle occupants and hear
sounds occurring in the vehicle. The vehicle’s 9-1-1
Call system will attempt to remain connected with the
9-1-1 operator until the 9-1-1 operator terminates the
connection.
5. The 9-1-1 operator may attempt to contact appropriate
emergency responders and provide them with important vehicle information and GPS coordinates.
WARNING!
• If anyone in the vehicle could be in danger (e.g., fire
or smoke is visible, dangerous road conditions or
location), do not wait for voice contact from a 9-1-1
operator. All occupants should exit the vehicle immediately and move to a safe location.
• Never place anything on or near the vehicle’s operable 1X(voice/data) or 3G(data) network and GPS
antennas. You could prevent operable 1X(voice/data)
or 3G(data) network and GPS signal reception,
which can prevent your vehicle from placing an
emergency call. An operable 1X(voice/data) or
3G(data) network and GPS signal reception is required for the 9-1-1 Call system to function properly.
• The 9-1-1 Call system is embedded into the vehicle’s
electrical system. Do not add aftermarket electrical
equipment to the vehicle’s electrical system. This
may prevent your vehicle from sending a signal to
initiate an emergency call. To avoid interference that
can cause the 9-1-1 Call system to fail, never add
aftermarket equipment (e.g., two-way mobile radio,
CB radio, data recorder, etc.) to your vehicle’s electrical system or modify the antennas on your vehicle. IF
(Continued)
SAFETY AND GENERAL INFORMATION 9
WARNING! (Continued)
YOUR VEHICLE LOSES BATTERY POWER FOR
ANY REASON (INCLUDING DURING OR AFTER
AN ACCIDENT), THE UCONNECT FEATURES,
APPS AND SERVICES, AMONG OTHERS, WILL
NOT OPERATE.
• Modifications to any part of the 9-1-1 Call system
could cause the air bag system to fail when you need
it. You could be injured if the air bag system is not
there to help protect you.
9-1-1 Call System Limitations
Vehicles sold in Canada and Mexico DO NOT have 9-1-1
Call system capabilities.
9-1-1 or other emergency line operators in Canada and
Mexico may not answer or respond to 9-1-1 system calls.
If the 9-1-1 Call system detects a malfunction, any of the
following may occur at the time the malfunction is detected, and at the beginning of each ignition cycle:
• The Rearview Mirror light will continuously be illuminated red.
• The Phone Screen will display the following message
“Vehicle phone requires service. Please contact your
dealer.”
• An In-Vehicle Audio message will state “Vehicle phone
requires service. Please contact your dealer.”
WARNING!
• Ignoring the rearview mirror light could mean you
will not have 9-1-1 Call services. If the rearview
mirror light is illuminated, have an authorized dealer
service the 9-1-1 Call system immediately.
• The Occupant Restraint Control module turns on the
Air Bag Warning Light on the instrument panel if a
malfunction in any part of the system is detected. If
the Air Bag Warning Light is illuminated, have an
authorized dealer service the Occupant Restraint
Control system immediately.
Even if the 9-1-1 Call system is fully functional, factors
beyond FCA US LLC’s control may prevent or stop 9-1-1
Call system operation. These include, but are not limited
to, the following factors:
• Delayed accessories mode is active.
• The ignition key is in OFF position.
1
10 SAFETY AND GENERAL INFORMATION
• The vehicle’s electrical systems are not intact.
NOTE:
• The 9-1-1 Call system software and/or hardware are
damaged during a crash.
• Your vehicle may be transmitting data as authorized by
the subscriber.
• The vehicle battery loses power or becomes disconnected during a vehicle crash.
• Equipment malfunction at the 9-1-1 operator facility.
• Never place anything on or near the vehicle’s 1X (voice/
data) or 3G (data) and GPS antennas. You could prevent
1X (voice/data) or 3G (data) and GPS signal reception,
which can prevent your vehicle from placing an emergency call. An operable 1X (voice/data) or 3G (data)
network connection and a GPS signal is required for the
9-1-1 Call system to function properly.
• Operator error by the 9-1-1 operator.
General Information
• 1X (voice/data) or 3G (data) network congestion.
This device complies with Part 15 of the FCC Rules and IC.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
• 1X (voice/data) or 3G (data) network and/or Global
Positioning Satellite signals are unavailable or
obstructed.
• Weather.
• Buildings, structures, geographic terrain, or tunnels.
WARNING!
ALWAYS obey traffic laws and pay attention to the
road. Some Uconnect Access services, including 9-1-1
and Assist, will NOT work without an operable
1X(voice/data) or 3G(data) network connection.
NOTE: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user’s authority to operate the equipment.
SAFETY AND GENERAL INFORMATION 11
REMOTE SERVICE FEATURES
For further information regarding Remote Service Features, refer to ”Using Uconnect Access” in the All About
Uconnect
Access”
Chapter
or
go
to
moparownerconnect.com . U.S. residents can also call:
1-855-792-4241
or Canadian residents call:
1-855-209-8317
1
INTRODUCTION
2
CONTENTS
䡵 UCONNECT 3C/3C NAV SYSTEM . . . . . . . . . . . .14
䡵 IDENTIFYING YOUR RADIO . . . . . . . . . . . . . . . .15
䡵 UCONNECT 3C SETTINGS . . . . . . . . . . . . . . . . .16
14 INTRODUCTION
UCONNECT 3C/3C NAV SYSTEM
3. Controls
Press the ⬙Controls⬙ button on the touchscreen to adjust the
auto-dimming mirror, heated & vented seats, heated &
vented steering wheel (If Equipped).
4. Apps
Press the “Apps
” button on the touchscreen to access
Smartphone and Connected vehicle options.
5. Climate
Refer to Climate Controls in your vehicle’s Owner’s
Manual for further details.
6. Nav — If Equipped
1. Radio
Press the “Radio” button on the touchscreen to enter Radio
Mode. The different tuner modes; AM, FM and SXM can be
selected by pressing the corresponding buttons on the
touchscreens in Radio Mode.
2. Media
Press the “Media” button on the touchscreen to access
media sources such as: Disc (If Equipped), USB Device,
AUX, Bluetooth, and SD Card (If Equipped) as long as the
requested media is present.
Press the “Nav” button on the touchscreen to access the
Navigation feature. Refer to the Navigation section in this
manual for further details.
7. Phone
Press the “Phone” button on the touchscreen to access the
Uconnect Phone feature.
INTRODUCTION 15
8. Enter/Browse & Tune/Scroll
IDENTIFYING YOUR RADIO
Push the ENTER/BROWSE button to accept a highlighted
selection on the screen. Rotate the TUNE/SCROLL rotary
knob to scroll through a list or tune a radio station.
Uconnect 3C/3C NAV
2
9. Back
Push the BACK button to return to a previous menu or
screen.
10. Volume/Mute
Rotate the rotary knob to adjust the Volume. Push the
VOLUME/MUTE button to mute the system.
Key Features
The 3C and 3C NAV share some features between them,
but the 3C NAV has features that set it apart. The following
features are shared between radios:
• 8.4” Touchscreen
• Hands-free/Bluetooth
• USB port, AUX jack and SD Card slot — If Equipped
• Touchscreen Climate Controls
16 INTRODUCTION
• SiriusXM Satellite Radio with Trial Included — If
Equipped
UCONNECT 3C SETTINGS
The 3C NAV sets itself apart by offering these unique
features:
Press the “Apps
” button on the touchscreen, then
press the “Settings
” button on the touchscreen to
display the menu setting screen. In this mode, the
Uconnect system allows you to access all of your
programmable features.
• HD Radio — U.S. and Canadian Markets Only
NOTE:
• Navigation Standard
• Only one touchscreen area may be selected at a time.
• One-shot destination entry
• Depending on the vehicles options, available feature
settings may vary.
• Uconnect Access — U.S. Market Only — If Equipped
• 3D content (Select this option and zoom to an appropriate level. Not all tall buildings are in 3D)
• Enhanced Digital Terrain Model (DTM)
• SiriusXM Traffic with Trial Included — U.S. Market Only
— If Equipped
• SiriusXM Travel Link with Trial Included — U.S. Market
Only — If Equipped
NOTE: 3D Landmarks are visible at 250 ft (76 m) and
below, 3D City Models are visible at 50 ft (15 m) and below
and Digital Terrain is visible at 100 mi and below.
When making a selection, press the button on the touchscreen to enter the desired mode. Once in the desired
mode, press and release the preferred setting until a
check-mark appears next to the setting, showing that
setting has been selected. Once the setting is complete,
either press the Back Arrow button on the touchscreen to
return to the previous menu, or press the “X” button on the
touchscreen to close out of the settings screen. Pressing the
Up or Down Arrow button on the right side of the screen
will allow you to toggle up or down through the available
settings.
Refer to “Uconnect Settings” in the Owner’s Manual for
further information.
RADIO MODE
CONTENTS
䡵 RADIO MODE . . . . . . . . . . . . . . . . . . . . . . . . . .18
▫ SiriusXM Satellite Radio Mode — If Equipped . . .21
▫ Radio Controls . . . . . . . . . . . . . . . . . . . . . . . . .18
▫ Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
▫ Setting Presets . . . . . . . . . . . . . . . . . . . . . . . . .20
▫ Steering Wheel Audio Controls — If Equipped . .29
3
18 RADIO MODE
The radio is equipped with the following modes:
Turn the rotary TUNE/SCROLL control knob clockwise to
increase or counterclockwise to decrease the radio station
frequency. Push the ENTER/BROWSE button to choose a
selection.
• AM
Screen Close
• FM
The X button on the touchscreen at the top right, provides
a means to close the Direct Tune Screen. The Direct Tune
Screen also auto closes if no activity occurs within ten
seconds.
RADIO MODE
Radio Controls
• SiriusXM Satellite Radio (if equipped)
Press the RADIO button on the touchscreen, bottom left
corner, to enter the Radio Mode. The different tuner modes;
AM, FM, and SXM, can then be selected by pressing the
corresponding buttons in the Radio mode.
VOLUME/MUTE Control
Push the VOLUME/MUTE control knob to mute the radio.
Push the VOLUME/MUTE control knob a second time to
unmute the radio.
The electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turning the
VOLUME/MUTE control knob clockwise increases the
volume, and counterclockwise decreases it.
TUNE/SCROLL Control
When the audio system is turned on, the sound will be set
at the same volume level as last played.
HD Radio (3C NAV Only)
HD Radio technology (available on Uconnect 3C NAV in
the U.S. and Canadian markets) works similar to conventional radio except it allows broadcasters to transmit a
high-quality digital signal. With an HD radio receiver, the
listener is provided with a clear sound that enhances the
listening experience. HD radio can also transmit data such
as song title or artist.
Seek And Direct Tune Functions
The Seek Up and Down functions are activated by pressing
the double arrow buttons on the touchscreen to the right
and left of the radio station display, or by pressing the left
“Steering Wheel Audio Control” (if equipped) up or down.
RADIO MODE 19
Seek Up
Fast Seek Down
Press and release the “Seek Up”
button on the touchscreen to tune the radio to the next listenable station or
channel. During a Seek Up function, if the radio reaches
the starting station after passing through the entire band
two times, the radio will stop at the station where it
began.
button on the touchPress and hold the “Seek Down”
screen to advance the radio through the available stations or channel at a faster rate, the radio stops at the
next available station or channel when the button on the
touchscreen is released.
Fast Seek Up
Press the “Tune” button on the touchscreen located at the
bottom of the radio screen. The Direct Tune button on the
touchscreen is available in AM, FM and SXM radio modes
can be used to direct tune the radio to a desired station or
channel.
button on the touchPress and hold the “Seek Up”
screen to advance the radio through the available stations or channels at a faster rate, the radio stops at the
next available station or channel when the button on the
touchscreen is released.
Seek Down
Press and release the “Seek Down”
button on the
touchscreen to tune the radio to the next listenable
station or channel. During a Seek Down function, if the
radio reaches the starting station after passing through
the entire band two times, the radio will stop at the
station where it began.
Direct Tune
Press the available number button on the touchscreen to
begin selecting a desired station. Once a number has been
entered, any numbers that are no longer possible (stations
that cannot be reached) will become deactivated/grayed
out.
Undo
You can backspace an entry by pressing the bottom left
button on the touchscreen.
“Undo” button or the
3
20 RADIO MODE
GO
Browse In AM/FM
Once the last digit of a station has been entered, the
DIRECT TUNE screen will close and the system will
automatically tune to that station.
When in either AM or FM, the Browse Screen provides a
means to edit the Presets List and is entered by pushing the
ENTER/BROWSE button.
The selected Station or Channel number is displayed in the
Direct Tune text box.
Scrolling Preset List
Setting Presets
The Presets are available for all Radio Modes, and are
activated by pressing any of the six “Preset” buttons on the
touchscreen, located at the top of the screen.
Once in the Browse Presets screen, you can scroll the preset
list by rotation of the TUNE/SCROLL knob, or by pressing
the “Up and Down” arrow keys, located on the right of the
screen.
Preset Selection From List
When you are receiving a station that you wish to commit
into memory, press and hold the desired numbered button
on the touchscreen for more than two seconds or until you
hear a confirmation beep.
A Preset can be selected by pressing any of the listed
Presets, or by pushing the ENTER/BROWSE button on the
TUNE/SCROLL knob to select the currently highlighted
Preset.
The Radio stores up to 12 presets in each of the Radio
modes. A set of six presets are visible at the top of the radio
screen.
When selected, the radio tunes to the station stored in the
Preset and returns to the main radio screen.
You can switch between the two radio presets by pressing
the “arrow button” located in the upper right of the radio
touchscreen.
A Preset can be deleted in the Presets Browse screen by
pressing the “Trash Can” icon for the corresponding Preset.
Deleting Presets
RADIO MODE 21
Return To Main Radio Screen
You can return to the Main Radio Screen, by pressing the
“X” button on the touchscreen when in the Browse Presets
screen.
• Xtra Channels featuring SiriusXM Latino – a collection
of Spanish-language channels
• MySXM – allowing you to personalize your favorite
music channels
SiriusXM Satellite Radio Mode — If Equipped
Go to siriusxm.com/getallaccess for more information
SiriusXM Satellite Radio uses direct satellite-to-receiver
broadcasting technology to provide clear, coast to coast
radio content. SiriusXM is a subscription based service.
SiriusXM services require subscriptions, sold separately
after the trial included with the new vehicle purchase. If
you decide to continue your service at the end of your trial
subscription, the plan you choose will automatically renew
and bill at then-current rates until you call SiriusXM at
866-635-2349 to cancel. See SiriusXM Customer Agreement
for complete terms at www.siriusxm.com (U.S. Residents)
or www.siriusxm.ca (Canadian Residents). All fees and
programming subject to change. Our satellite service is
available only to those at least 18 and older in the 48 contiguous USA and D.C. Our SiriusXM satellite service is also
available in PR (with coverage limitations). Our Internet
radio service is available throughout our satellite service
area and in AK. © 2017 SiriusXM Radio Inc. Sirius, XM and
all related marks and logos are trademarks of SiriusXM
Radio Inc.
SiriusXM All Access Package
All satellite radio equipped vehicles come with a trial to the
SiriusXM All Access package, providing over 160 channels
of the best programming for all the places life takes you.
• In your vehicle — You’ll get every channel available on
your radio, including all the premium programming like
Howard Stern, every NFL game, every MLB game, every
NASCAR race, Oprah Radio, and more.
• On the go — With a SiriusXM Internet Radio subscription included with the All Access trial, you’ll get
SiriusXM on your computer, smartphone, or tablet.
Including:
• A huge On Demand catalog
This functionality is only available for radios equipped
with a Satellite receiver. In order to receive satellite radio,
the vehicle needs to be outside with a clear view to the sky.
3
22 RADIO MODE
If the screen shows Acquiring Signal, you might have to
change the vehicle’s position in order to receive a signal. In
most cases, the satellite radio does not receive a signal in
underground parking garages or tunnels.
No Subscription
Radios equipped with a Satellite receiver, require a subscription to the SiriusXM Service. When the Radio does not
have the necessary subscription, the Radio is able to receive
the Pre-View channel only.
When in Satellite mode:
• The SXM button on the touchscreen is highlighted.
• The SiriusXM Presets are displayed at the top of the
screen.
• The Genre is displayed below the Presets Bar.
• The SiriusXM Channel Number is displayed in the
center.
Acquiring SiriusXM Subscription
• The Program Information is displayed at the bottom of
the Channel Number.
To activate the SiriusXM Satellite Radio subscription, U.S.
residents call:
• The SiriusXM function buttons are displayed below the
Program Information.
1-800-643-2112
Tuning is done by operating the Tune Knob or by Direct
Tune, similar to other Radio Bands, see Presets, browse,
Tune Knob, and Direct Tune.
Canadian residents call:
1-877-438-9677
NOTE: You will need to provide the SiriusXM ID (RID)
located at the bottom of the Channel 0 screen.
The Satellite Mode is activated by a press of the “SXM”
button on the touchscreen.
In addition to the tuning Operation functions common to
all Radio modes, the replay, Traffic/Weather Jump, and fav
button functions are available in SiriusXM Mode.
RADIO MODE 23
Replay
Forward
The replay function provides a means to store and replay
up to 22 minutes of music audio and 48 minutes of talk
radio. Once the channel is switched, content in replay
memory is lost.
Each press of the “FW” button on the touchscreen forwards
the content in steps of five seconds. Forwarding of the
content can only be done when the content is previously
rewound, and therefore, can not be done for live content. A
continuous press of the “FW” button on the touchscreen
also forwards the content. The Radio begins playing the
content at the point at which the press is release.
Press the “Replay” button on the touchscreen. The play/
pause, rewind/forward and live buttons will display at the
top of the screen, along with the replay time.
You can exit by pressing the “Replay” button on the
touchscreen, any time during the Replay mode.
Play/Pause
Live
Press the “Live” button on the touchscreen to resume
playing of Live content.
Press the “Pause/Play” button on the touchscreen to pause
the playing of live or rewound content at any time. Play
can be resumed again by pressing the “Pause/Play” button
on the touchscreen.
Favorites
Rewind
You can exit the Favorites Menu by a press of the “X” in the
top right corner.
Press the “RW” button on the touchscreen to rewind the
content in steps of five seconds. Pressing the “RW” button
on the touchscreen for more than two seconds rewinds the
content. The Radio begins playing the content at the point
at which the press is released.
Press the “fav.” button on the touchscreen to activate the
favorites menu, which will time out in five seconds in
absence of user interaction.
The favorites feature enables you to set a favorite artist, or
song that is currently playing. The Radio then uses this
information to alert you when either the favorite song, or
favorite artist are being played at any time by any of the
SiriusXM Channels.
3
24 RADIO MODE
The maximum number of favorites that can be stored in the
Radio is 50.
Fav. Artist: While the song is playing to set a Favorite
Artist, press the “fav.” button on the touchscreen and then
the Fav. Artist button on the touchscreen.
Fav. Song: While the song is playing to set a Favorite Song,
press the “fav.” button on the touchscreen and then the Fav
Song button on the touchscreen.
Traffic & Weather — Available On The 3C NAV If
Equipped In The U.S. Market Only
Press the Traffic & Weather button on the touchscreen to
tune to a SiriusXM Traffic and Weather channel. To set a
Traffic & Weather alert for any one of the cities in the Jump
Browse list, see Browse in SXM.
When the Traffic & Weather button on the touchscreen is
pressed, the Traffic & Weather channel is tuned.
If the Traffic & Weather alert City is not set, you are
presented with a pop up to allow you to select the favorite
city using the Browse Screen.
Browse In SXM
Press the “Browse” button on the touchscreen to edit
Presets, Favorites, Game Zone, and Jump settings, along
with providing the SiriusXM Channel List.
This Screen contains many sub menus. You can exit a sub
menu to return to a parent menu by pressing the “Back
Arrow.”
All
Press the “All” button at the left of the Browse Screen.
Channel List
Press the Channel List, or Genre, to display all the
SiriusXM Channel Numbers. You can scroll the Channel
list by pressing the “Up and Down arrows”, located on the
right side of the screen. Scrolling can also be done by
operating the TUNE/SCROLL knob.
Genre
Press the “Genre” button on the touchscreen to display a
list of Genres. You can select any desired Genre by pressing
the “Genre” list, the Radio tunes to a channel with the
content in the selected Genre.
RADIO MODE 25
Presets
Press the “Presets” button located at the left of the Browse
screen.
You can scroll the Presets list pressing the up and down
arrows located at the right side of the screen. Scrolling can
also be done by operating the TUNE/SCROLL knob as
well.
Preset Selection
A Preset can be selected by pressing any of the listed
“Presets”, or by pushing the ENTER/BROWSE button on
the TUNE/SCROLL knob to select the currently highlighted Preset. When selected, the Radio tunes to the
station stored in the Preset, and returns to the main Radio
screen.
Deleting A Preset
A Preset can be deleted in the Presets Browse screen by
pressing the “Trash Can” Icon for the corresponding Preset.
Favorites
Press the “Favorites” button located at the left of the
Browse screen.
The Favorites menu provides a means to Edit the Favorites
list and to configure the Alert Settings, along with providing a list of Channels currently airing any of the items in
the Favorites list.
You can scroll the Favorites list by pressing the “Up and
Down” arrows located at the right side of the screen.
Scrolling can also be done by operating the TUNE/
SCROLL knob as well.
Remove Favorites
Press the “Remove Favorites” tab at the top of the screen.
Press the “Delete All” button on the touchscreen to delete
all of the Favorites or press the “Trash Can” icon next to the
Favorite to be deleted.
Alert Settings
Press the “Alert Setting” tab at the top of the screen. The
Alert Settings menu allows you to choose from a Visual
alert or Audible and Visual alert when one of your favorites is airing on any of the SiriusXM channels.
Game Zone
Press the “Game Zone” button, located at the left of the
Browse screen. This feature provides you with the ability to
select teams, edit the selection, and set alerts.
3
26 RADIO MODE
On Air
Audio
Press the “On-Air” tab at the top of the screen. The On-Air
list provides a list of Channels currently airing any of the
items in the Selections list, and pressing any of the items in
the list tunes the radio to that channel.
Press the “Audio” button on the touchscreen to activate the
Audio settings screen to adjust Balance/Fade, Equalizer,
Speed Adjusted Volume, Aux Volume Offset, and Surround
Sound.
Select Teams
You can return to the Radio screen by pressing the “X”
located at the top right.
Press the “Select Teams” button on the touchscreen to
activate the League Scroll list. Press the chosen league and
a scroll list of all teams within the league will appear, then
you can select a team by pressing the corresponding box. A
check mark appears for all teams that are chosen.
Remove Selection
Press the “Remove Selection” tab at the top of the screen.
Press the “Delete All” button on the touchscreen to delete
all of the Selections or press the “Trash Can Icon” next to
the Selection to be deleted.
Alert Settings
Press the “Alert Setting” tab at the top of the screen. The
Alert Settings menu allows you to choose from “Alert me
to on-air games upon start” or “Alert upon score update”
or both when one or more of your selections is airing on
any of the SiriusXM channels.
Balance/Fade
RADIO MODE 27
Press the “Balance/Fade” button on the touchscreen to
Balance audio between the front speakers or fade the audio
between the rear and front speakers.
Pressing the “Front,” “Rear,” “Left,” or “Right” buttons or
press and drag the red Speaker Icon to adjust the Balance/
Fade.
Press the “+” or “–” buttons, or by pressing and dragging
over the level bar for each of the equalizer bands. The level
value, which spans between plus or minus nine, is displayed at the bottom of each of the Bands.
Speed Adjusted Volume
Equalizer
Press the “Speed Adjusted Volume” button on the touchscreen to activate the Speed Adjusted Volume screen.
Press the “Equalizer” button on the touchscreen to activate
the Equalizer screen.
The Speed Adjusted Volume is adjusted by selecting from
“Off,” “1,” “2” or “3.” This alters the automatic adjustment
3
28 RADIO MODE
of the audio volume with variation to vehicle speed.
Volume increases automatically as speed increases to compensate for normal road noise.
AUX Volume Offset
Surround Sound — If Equipped
Press the “On” button on the touchscreen to activate
Surround Sound. Press “Off” to deactivate this feature.
When Surround Sound is On, you can hear audio coming
from every direction as in a movie theatre or home theatre
system.
Press the “AUX Volume Offset” button on the touchscreen
to activate the AUX Volume Offset screen.
The AUX Volume Offset is adjusted by pressing of the “+”
and “–” buttons. This alters the AUX input audio volume.
The level value, which spans between plus or minus three,
is displayed above the adjustment bar.
RADIO MODE 29
Auto Play
Press the “Auto Play” button on the touchscreen to activate
the Auto Play screen.
The Auto Play feature begins playing music as soon as a
USB Media device is connected to one of the vehicle’s
Media USB ports, when it is turned on. Press “Off” to turn
the setting off.
Steering Wheel Audio Controls — If Equipped
The remote sound system controls are located on the rear
surface of the steering wheel. Reach behind the wheel to
access the switches.
The following describes the left-hand control operation in
each mode.
Radio Operation
Pushing the top of the switch will “Seek” up for the next
listenable station and pushing the bottom of the switch will
“Seek” down for the next listenable station.
The button located in the center of the left-hand control
will tune to the next preset station that you have programmed in the radio preset button.
Media Mode
The right-hand control is a rocker-type switch with a
push-button in the center and controls the volume and
mode of the sound system. Pushing the top of the rocker
switch will increase the volume, and pushing the bottom of
the rocker switch will decrease the volume.
Pushing the top of the switch once will go to the next track
on the selected media (AUX, Bluetooth, USB). Pushing the
bottom of the switch once will go to the beginning of the
current track, or to the beginning of the previous track if it
is within eight seconds after the current track begins to
play.
Pushing the center button will make the radio switch
between the various modes available (AM/FM/AUX etc.).
If you push the switch up or down twice, it plays the
second track; three times, it will play the third, etc.
The left-hand control is a rocker-type switch with a pushbutton in the center. The function of the left-hand control is
different depending on which mode you are in.
3
MEDIA MODE
CONTENTS
䡵 MEDIA MODE . . . . . . . . . . . . . . . . . . . . . . . . . .32
▫ AUX Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .34
▫ Disc Mode — If Equipped . . . . . . . . . . . . . . . . .32
▫ SD Card Mode — If Equipped . . . . . . . . . . . . . .35
▫ USB/iPod Mode . . . . . . . . . . . . . . . . . . . . . . . .33
▫ Bluetooth Mode . . . . . . . . . . . . . . . . . . . . . . . .36
4
32 MEDIA MODE
MEDIA MODE
Disc Mode — If Equipped
Overview
Disc Mode is entered by either inserting a Disc or pressing
the “Disc” button on the left side of the display. Once in
Media Mode, press the “Source” button on the touchscreen
and select “CD.”
A “Insert Disc” message will be displayed on the screen in
the Disc mode when a Disc is not present in the Radio.
Seek Up
/Seek Down
Press and release the Seek Up
button on the touchscreen for the next selection on the Disc. Press and
button on the touchscreen to
release the Seek Down
return to the beginning of the current selection, or to
return to the beginning of the previous selection if the
Disc is within the first three seconds of the current
selection.
Browse
Press the “Browse” button on the touchscreen to display
the browse window. The left side of the browse window
displays a list of ways you can browse through the contents
of the Disc. If supported by the device, you can browse by
Folders, Artists, Playlists, Albums, Songs, etc. Press the
desired button on the touchscreen on the left side of the
screen. The center of the browse window shows items and
it’s sub-functions, which can be scrolled by pressing the
“Up” and “Down” buttons to the right. The TUNE/
SCROLL knob can also be used to scroll.
Media Mode
Press the “Media” button on the touchscreen to select the
desired audio source: Disc.
Repeat
Press the “Repeat” button on the touchscreen to toggle the
repeat functionality. The Repeat button on the touchscreen
is highlighted when active. The Radio will continue to play
the current track, repeatedly, as long as the repeat is active.
Shuffle
Press the “Shuffle” button on the touchscreen to play the
selections on the compact disc in random order to provide
an interesting change of pace. Press the button on the
touchscreen a second time to turn this feature off.
Audio
Refer to Radio Mode for adjusting the audio settings.
MEDIA MODE 33
Info
Press the “Info” button on the touchscreen to display the
current track information. Press the “Info” button on the
touchscreen a second time to cancel this feature.
Tracks
Press the “trks” button on the touchscreen to display a pop
up with the Song List. The currently playing song is
indicated by an arrow and lines above and below the song
title. When in the Tracks List screen you can rotate the
TUNE/SCROLL knob to highlight a track (indicated by the
line above and below the track name) and then push the
ENTER/BROWSE knob to start playing that track.
Press and release the Seek Down
button on the
touchscreen to return to the beginning of the current
selection, or to return to the beginning of the previous
selection if the USB device/iPod is within the first three
seconds of the current selection.
Browse
USB/iPod Mode
Press the “Browse” button on the touchscreen to display
the browse window. The left side of the browse window
displays a list of ways you can browse through the contents
of the USB device/iPod. If supported by the device, you
can browse by Folders, Artists, Playlists, Albums, Songs,
etc. Press the desired button on the left side of the screen.
The center of the browse window shows items and it’s
sub-functions, which can be scrolled by pressing the “Up”
and “Down” buttons to the right. The TUNE/SCROLL
knob can also be used to scroll.
Overview
Media Mode
USB/iPod Mode is entered by either inserting a USB device
or iPod and cable into the USB Port or press the “iPod”
button on the left side of the display.
Press the “Media” button on the touchscreen to select the
desired audio source: USB.
Pressing the “trks” button on the touchscreen while the
pop up is displayed will close the pop up.
Seek Up
/Seek Down
Press and release the Seek Up
button on the touchscreen for the next selection on the USB device/iPod.
Repeat
Press the “Repeat” button on the touchscreen to toggle the
repeat functionality. The Repeat button on the touchscreen
4
34 MEDIA MODE
is highlighted when active. The Radio will continue to play
the current track, repeatedly, as long as the repeat is active.
Shuffle
Press the “Shuffle” button on the touchscreen to play the
selections on the USB/iPod device in random order to
provide an interesting change of pace. Press the “Shuffle”
button on the touchscreen a second time to turn this feature
off.
Info
Press the “Info” button on the touchscreen to display the
current track information. Press the “Info” button on the
touchscreen a second time to cancel this feature.
Tracks
Press the “trks” button on the touchscreen to display a pop
up with the Song List. The currently playing song is
indicated by an arrow and lines above and below the song
title. When in the “trks” List screen you can rotate the
TUNE/SCROLL knob to highlight a track (indicated by the
line above and below the track name) and then push the
ENTER/BROWSE knob to start playing that track.
Pressing the “trks” button on the touchscreen while the
pop up is displayed will close the pop up.
Audio
Refer to Radio Mode for adjusting the audio settings.
AUX Mode
Overview
AUX (Auxiliary Mode) is entered by inserting an AUX
device using a cable with a 3.5 mm audio jack into the AUX
port or by pressing the AUX button on the left side of the
display.
Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX Port.
If you insert an Auxiliary device with the ignition ON and
the radio ON, the unit will switch to AUX mode and begin
to play when you insert the device cable.
Controlling The Auxiliary Device
The control of the auxiliary device (e.g., selecting playlists,
play, fast forward, etc.) cannot be provided by the radio;
use the device controls instead. Adjust the volume with the
VOLUME/MUTE rotary knob, or with the volume of the
attached device.
MEDIA MODE 35
NOTE: The vehicle radio unit is acting as the amplifier for
audio output from the Auxiliary device. Therefore if the
volume control on the Auxiliary device is set too low, there
will be insufficient audio signal for the radio unit to play
the music on the device.
Media Mode
Press the “Media” button on the touchscreen to select the
desired audio source: AUX.
Audio
Refer to Radio Mode for adjusting the audio settings.
SD Card Mode — If Equipped
Overview
SD Card Mode is entered by either inserting a SD Card into
the SD Card slot or press the “SD Card” button on the left
side of the display.
Seek Up
/Seek Down
Press and release the Seek Up
button on the touchscreen for the next selection on the SD Card. Press and
button on the touchscreen to
release the Seek Down
return to the beginning of the current selection, or to
return to the beginning of the previous selection if the
SD Card is within the first three seconds of the current
selection.
Browse
Press the “Browse” button on the touchscreen to display
the browse window. The left side of the browse window
displays a list of ways you can browse through the contents
of the SD Card. If supported by the device, you can browse
by Folders, Artists, Playlists, Albums, Songs, etc. Press the
desired button on the left side of the screen. The center of
the browse window shows items and it’s sub-functions,
which can be scrolled by pressing the “Up” and “Down”
buttons to the right. The TUNE/SCROLL knob can also be
used to scroll.
Media Mode
Press the “Media” button on the touchscreen to select the
desired audio source: SD Card.
Repeat
Press the “Repeat” button on the touchscreen to toggle the
repeat functionality. The Repeat button on the touchscreen
is highlighted when active. The Radio will continue to play
the current track, repeatedly, as long as the repeat is active.
4
36 MEDIA MODE
Shuffle
Bluetooth Mode
Press the “Shuffle” button on the touchscreen to play the
selections on the SD Card device in random order to
provide an interesting change of pace. Press the “Shuffle”
button on the touchscreen a second time to turn this feature
off.
Overview
Info
Press the “Info” button on the touchscreen to display the
current track information. Press the “Info” button on the
touchscreen a second time to cancel this feature.
Tracks
Press the “trks” button on the touchscreen to display a pop
up with the Song List. The currently playing song is
indicated by an arrow and lines above and below the song
title. When in the Tracks List screen you can rotate the
TUNE/SCROLL knob to highlight a track (indicated by the
line above and below the track name) and then push the
ENTER/BROWSE knob to start playing that track.
Pressing the “trks” button on the touchscreen while the
pop up is displayed will close the pop up.
Audio
Refer to Radio Mode for adjusting the audio settings.
Bluetooth Streaming Audio (BTSA) or Bluetooth Mode is
entered by pairing a Bluetooth device, containing music, to
the Uconnect System.
Before proceeding, the Bluetooth device must be paired to
the Uconnect Phone to communicate with the Uconnect
System.
NOTE: See the pairing procedure in the Uconnect Phone
section for more details.
To access Bluetooth mode, press the “Bluetooth” button on
the left side of the display.
MEDIA MODE 37
Media Mode
Press the “Media” button on the touchscreen to select the
desired audio source: Bluetooth.
Tracks
If the Bluetooth device supports this feature, press the
“trks” button on the touchscreen to display a pop up with
the Song List. The currently playing song is indicated by a
red arrow and lines above and below the song title.
Pressing the “trks” button on the touchscreen while the
pop up is displayed will close the pop up.
Audio
Refer to Radio Mode for adjusting the audio settings.
Seek Up
/Down
Press and release the “Right Arrow”
button on the
touchscreen for the next selection on the Bluetooth
button on
device. Press and release the “Left Arrow”
the touchscreen to return to the beginning of the current
selection, or return to the beginning of the previous
selection if the Bluetooth device is within the first
second of the current selection.
4
PHONE MODE
CONTENTS
䡵 UCONNECT PHONE . . . . . . . . . . . . . . . . . . . . .40
▫ Advanced Phone Connectivity . . . . . . . . . . . . . .54
▫ Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
▫ Things You Should Know About Your Uconnect
Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
▫ Phone Call Features . . . . . . . . . . . . . . . . . . . . .50
5
40 PHONE MODE
UCONNECT PHONE
Overview
Uconnect Phone is a voice-activated, hands-free, in-vehicle
communications system. Uconnect Phone allows you to
dial a phone number with your mobile phone.
Uconnect Phone supports the following features:
Voice Activated Features:
• Hands-Free dialing via Voice (“Call John Smith Mobile”
or, “Dial 248-555-1212”).
• Searching Contacts phone number (“Search for John
Smith Mobile”).
• Voice Texting (Requires registration to Uconnect Access
and a current subscription).
NOTE: Examples of Voice Commands are provided
throughout this manual. For quick use, go to the Voice
Command Quick Reference Section.
Screen Activated Features
• Dialing via Keypad using touchscreen.
• Hands-Free text to speech listening of your incoming
SMS messages.
• Viewing and Calling contacts from Phonebooks displayed on the touchscreen.
• Hands-free Text Message Reply. (Forward one of 18 predefined SMS messages to incoming calls/text messages).
• Setting Favorite Contact Phone numbers so they are
easily accessible on the Main Phone screen.
• Redialing last dialed numbers (“Redial”).
• Viewing and Calling contacts from Recent Call logs.
• Calling Back the last incoming call number (“Call
Back”).
• Reviewing your recent Incoming SMS.
• View Call logs on screen (“Show incoming calls,” “Show
Outgoing calls,” “Show missed Calls,” “Show Recent
Calls”).
• Listen to Music on your Bluetooth Device via the
touchscreen.
• Pairing up to ten phones/audio devices for easy access
to connect to them quickly.
PHONE MODE 41
NOTE: Your phone must be capable of SMS messaging via
Bluetooth for messaging features to work properly.
Your mobile phone’s audio is transmitted through your
vehicle’s audio system; the system will automatically mute
your radio when using the Uconnect Phone.
For Uconnect customer support:
• U.S. residents - visit UconnectPhone.com or call:
877-855-8400
• Canadian residents - (English) call:
800-465-2001
or (French) call:
800-387-9983
Uconnect Phone allows you to transfer calls between the
system and your mobile phone as you enter or exit your
vehicle and enables you to mute the system’s microphone
for private conversation.
WARNING!
ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume
all risks related to the use of the Uconnect features
and applications in this vehicle. Only use Uconnect
when it is safe to do so. Failure to do so may result
in an accident involving serious injury or death.
The Uconnect Phone is driven through your Bluetooth
“Hands-Free Profile” mobile phone. Uconnect features
Bluetooth technology - the global standard that enables
different electronic devices to connect to each other without wires or a docking station, so Uconnect Phone works
no matter where you stow your mobile phone (be it your
purse, pocket, or briefcase), as long as your phone is turned
on and has been paired to the vehicle’s Uconnect Phone.
The Uconnect Phone allows up to ten mobile phones or
audio devices to be linked to the system. Only one linked
(or paired) mobile phone and one audio device can be used
with the system at a time.
5
42 PHONE MODE
Uconnect Phone Button
Operation
button on your steering wheel is
The Uconnect Phone
used to get into the phone mode and make calls, show
recent, incoming, outgoing calls, view phonebook etc.,
When you press the button you will hear a BEEP. The
beep is your signal to give a command.
Voice commands can be used to operate the Uconnect
Phone and to navigate through the Uconnect Phone menu
structure. Voice commands are required after most
Uconnect Phone prompts. There are two general methods
for how Voice Command works:
Uconnect Voice Command Button
1. Say compound commands like “Call John Smith mobile.”
button on your steerThe Uconnect Voice Command
ing wheel is only used for “barge in” and when you are
already in a call and you want to send Tones or make
another call.
The
button on your steering wheel is also used to
access the Voice Commands for the Uconnect Voice
Command features if your vehicle is equipped. Please
see the Uconnect Voice Command section for direction
button.
on how to use the
The Uconnect Phone is fully integrated with the vehicle’s
audio system. The volume of the Uconnect Phone can be
adjusted either from the radio volume control knob or from
the steering wheel radio control (right switch), if equipped.
2. Say the individual commands and allow the system to
guide you to complete the task.
You will be prompted for a specific command and then
guided through the available options.
• Prior to giving a voice command, one must wait for the
beep, which follows the “Listen” prompt or another
prompt.
• For certain operations, compound commands can be
used. For example, instead of saying “Call” and then
“John Smith” and then “mobile”, the following compound command can be said: “Call John Smith mobile.”
• For each feature explanation in this section, only the
compound command form of the voice command is
given. You can also break the commands into parts and
PHONE MODE 43
say each part of the command when you are asked for it.
For example, you can use the compound command form
voice command “Search for John Smith,” or you can
break the compound command form into two voice
commands: “Search Contact” and when asked “John
Smith.” Please remember, the Uconnect Phone works
best when you talk in a normal conversational tone, as if
speaking to someone sitting a few feet/meters away
from you.
Natural Speech
Your Uconnect Phone Voice system uses a Natural Language Voice Recognition (VR) engine.
Natural speech allows the user to speak commands in
phrases or complete sentences. The system filters out
certain non-word utterances and sounds such as “ah” and
“eh.” The system handles fill-in words such as “I would
like to.”
The system handles multiple inputs in the same phrase or
sentence such as “make a phone call” and “to Kelly Smith.”
For multiple inputs in the same phrase or sentence, the
system identifies the topic or context and provides the
associated follow-up prompt such as “Who do you want to
call?” in the case where a phone call was requested but the
specific name was not recognized.
The system utilizes continuous dialog; when the system
requires more information from the user it will ask a
question to which the user can respond without pushing
the “Voice Command”
button on your steering wheel.
Help Command
If you need assistance at any prompt, or if you want to
know your options at any prompt, say “Help” following
the beep.
To activate the Uconnect Phone from idle, simply push the
button on your steering wheel and say a
Phone
command or say “help.” All Uconnect Phone sessions
button on the radio
begin with a push of the Phone
control head.
Cancel Command
At any prompt, after the beep, you can say “Cancel” and
you will be returned to the main menu.
or Voice Command
You can also push the Phone
button on your steering wheel when the system is
listening for a command and be returned to the main or
previous menu.
5
44 PHONE MODE
Pair (Link) Uconnect Phone To A Mobile Phone
NOTE:
To begin using your Uconnect Phone, you must pair your
compatible Bluetooth enabled mobile phone. Mobile phone
pairing is the process of establishing a wireless connection
between a cellular phone and the Uconnect system.
• You must have Bluetooth enabled on your phone to
complete this procedure.
To complete the pairing process, you will need to reference
your mobile phone Owner’s Manual. Please visit
UconnectPhone.com for complete mobile phone compatibility information.
• The vehicle must be in PARK.
1. Place the ignition in the ACC or ON position.
2. Press the “Phone” button in the Menu Bar on the
touchscreen.
• If there is no phones currently connected with the
system, a pop-up will appear asking if you would like
to pair a mobile phone.
3. Select “Yes” to begin the pairing process.
4. Search for available devices on your Bluetooth enabled
mobile phone.
• Press the Settings button on your mobile phone.
• Select Bluetooth and ensure it is enabled. Once enabled, the mobile phone will begin to search for
Bluetooth connections.
PHONE MODE 45
5. If No is selected, and you still would like to pair a
mobile phone, press the “Settings” button from the
Uconnect Phone main screen.
• Select “Paired Phones” then press the “Add Device”
button on the touchscreen.
• Search for available devices on your Bluetooth enabled
mobile phone (see below). When prompted on the
phone, select “Uconnect” and accept the connection
request.
entering the vehicle. Only one mobile phone and/or one
Bluetooth audio device can be connected to the
Uconnect system at a time. If “No” is selected, simply
select “Uconnect” from the mobile phone/audio device
Bluetooth screen, and the Uconnect system will reconnect to the Bluetooth device.
5
6. Uconnect Phone will display an in progress screen while
the system is connecting.
7. When your mobile phone finds the Uconnect system,
select “Uconnect.”
8. When prompted on the mobile phone, accept the connection request from Uconnect Phone.
NOTE: Some mobile phones will require you to enter the
PIN number.
9. When the pairing process has successfully completed,
the system will prompt you to choose whether or not
this is your favorite phone. Selecting “Yes” will make
this phone the highest priority. This phone will take
precedence over other paired phones within range and
will connect to the Uconnect system automatically when
Pair Additional Mobile Phones
1. Press the “Settings” button on the touchscreen from the
Phone main screen.
46 PHONE MODE
2. Next, press the “Phone/Bluetooth” button on the touchscreen.
6. When the pairing process has successfully completed,
the system will prompt you to choose whether or not
this is your favorite phone. Selecting “Yes” will make
this phone the highest priority. This phone will take
precedence over other paired phones within range.
NOTE: For phones which are not made a favorite, the
phone priority is determined by the order in which it was
paired. The latest phone paired will have the higher
priority.
You can also use the following VR commands to bring up
the Paired Phone screen from any screen on the radio:
• “Show Paired Phones” or
• “Connect My Phone”
Pair A Bluetooth Streaming Audio Device
1. Press the “Media” button on the touchscreen to begin.
3. Press the “Add Device” button on the touchscreen.
2. Change the Source to Bluetooth.
4. Search for available devices on your Bluetooth enabled
mobile phone. When prompted on the phone, enter the
name and PIN shown on the Uconnect screen.
3. Press the “Bluetooth” button on the touchscreen to
display the Paired Audio Devices screen.
5. Uconnect Phone will display an in process screen while
the system is connecting.
4. Press the “Add Device” button on the touchscreen.
NOTE: If there is no device currently connected with the
system, a pop-up will appear.
PHONE MODE 47
5. Search for available devices on your Bluetooth enabled
audio device. When prompted on the device, enter the
PIN shown on the Uconnect screen.
6. Uconnect Phone will display an in process screen while
the system is connecting.
7. When the pairing process has successfully completed,
the system will prompt you to choose whether or not
this is your favorite device. Selecting Yes will make this
device the highest priority. This device will take precedence over other paired devices within range.
NOTE: For devices which are not made a favorite, the
device priority is determined by the order in which it was
paired. The latest device paired will have the higher
priority.
Connecting To A Particular Mobile Phone Or Audio
Device After Pairing
Uconnect Phone will automatically connect to the highest
priority paired phone and/or Audio Device within range.
If you need to choose a particular phone or Audio Device
follow these steps:
1. Press the “Settings” button on the touchscreen.
2. Press the “Paired Phones” or “Paired Audio Sources”
button on the touchscreen.
3. Press to select the particular Phone or the particular
Audio Device.
4. Press the “X” to exit out of the Settings screen.
Disconnecting A Phone Or Audio Device
You can also use the following VR command to bring up a
list of paired audio devices.
1. Press the “Settings” button on the touchscreen.
• “Show Paired Phones” or
2. Press the “Paired Phones” or “Paired Audio Devices”
button on the touchscreen.
• “Connect My Phone”
3. Press the “Settings” button located to the right of the
device name.
4. The options pop-up will be displayed.
5
48 PHONE MODE
5. Press the “Disconnect Device” button on the touchscreen.
4. The options pop-up will be displayed.
6. Press the “X” to exit out of the Settings screen.
5. Press the “Make Favorite” button on the touchscreen;
you will see the chosen device move to the top of the list.
Deleting A Phone Or Audio Device
6. Press the “X” to exit out of the Settings screen.
1. Press the “Settings” button on the touchscreen.
Phonebook Download (Automatic Phonebook
Transfer From Mobile Phone) — If Equipped
2. Press the “Pair Phones” or “Paired Audio Devices”
button on the touchscreen.
3. Press the “Settings” button located to the right of the
device name for a different Phone or Audio Device than
the currently connected device.
4. The options pop-up will be displayed.
5. Press the “Delete Device” button on the touchscreen.
6. Press the “X” to exit out of the Settings screen.
Making A Phone Or Audio Device A Favorite
1. Press the “Settings” button on the touchscreen.
2. Press the “Paired Phones” or “Paired Audio Devices”
button on the touchscreen.
3. Press the “Settings” button located to the right of the
device name.
If equipped and specifically supported by your phone,
Uconnect Phone automatically downloads names (text
names) and number entries from the mobile phone’s
phonebook. Specific Bluetooth Phones with Phone Book
Access Profile may support this feature. See Uconnect
website, UconnectPhone.com, for supported phones.
• To call a name from a downloaded mobile phone book,
follow the procedure in the “Voice Recognition Quick
Tips” section.
• Automatic download and update of a phone book, if
supported, begins as soon as the Bluetooth wireless
phone connection is made to the Uconnect Phone, for
example, after you start the vehicle.
• A maximum of 5,000 contact names with four numbers
per contact will be downloaded and updated every time
a phone is connected to the Uconnect Phone.
PHONE MODE 49
• Depending on the maximum number of entries downloaded, there may be a short delay before the latest
downloaded names can be used. Until then, if available,
the previously downloaded phonebook is available for
use.
NOTE: If the Favorites list is full, you will be asked to
remove an existing favorite.
• Only the phonebook of the currently connected mobile
phone is accessible.
3. From the Phone main screen, select phonebook. From
the phonebook screen, select the “Favorites” button on
the touchscreen and then select the ⬙Settings⬙ button on
the touchscreen located to the right of the phonebook
record.
• This downloaded phonebook cannot be edited or deleted on the Uconnect Phone. These can only be edited
on the mobile phone. The changes are transferred and
updated to Uconnect Phone on the next phone connection.
4. Select an empty entry and press the ⬙Settings⬙ button on
that selected entry. When the Options pop-up appears,
press “Add from Mobile.” You will then be asked which
contact and number to choose from your mobile phonebook. When complete the new favorite will be shown.
Managing Your Favorites
To Remove A Favorite
There are three ways you can add an entry to your
Favorites.
1. To remove a Favorite, select “phonebook” from the
Phone main screen.
1. During an active call of a number to make a favorite,
press and hold the preset button on the touchscreen on
the top of the phone main screen.
2. Next select “Favorites” on the left side of the screen and
then press the ⬙Settings⬙ button on the touchscreen.
2. After loading the mobile phonebook, select phonebook
from the Phone main screen, then select the appropriate
number. Press the ⬙Settings⬙ button next to the selected
number to display the options pop-up. In the pop-up
select “Add to Favorites.”
4. The Options pop-up will display, press “Remove from
Favs.”
3. Press the ⬙Settings⬙ button next to the Favorite you
would like to remove.
5
50 PHONE MODE
Phone Call Features
Dial By Saying A Number
The following features can be accessed through the
Uconnect Phone if the feature(s) are available and supported by Bluetooth on your mobile service plan. For
example, if your mobile service plan provides three-way
calling, this feature can be accessed through the Uconnect
Phone. Check with your mobile service provider for the
features that you have.
1. Push the “Phone”
begin.
Ways To Initiate A Phone Call
Listed below are all the ways you can initiate a phone call
with Uconnect Phone.
• Redial
• Dial by pressing in the number
button on your steering wheel to
2. After the “Listening” prompt and the following beep,
say “Dial 151-123-4444.”
3. The Uconnect Phone will dial the number 151-123-4444.
Call By Saying A Phonebook Name
1. Push the Phone
begin.
button on your steering wheel to
2. After the “Listening” prompt and the following beep,
say “Call John Doe Mobile.”
• Voice Commands (Dial by Saying a Name, Call by
Saying a Phonebook Name, Redial or Call Back)
3. The Uconnect Phone will dial the number associated
with John Doe, or if there are multiple numbers it will
ask which number you want to call for John Doe.
• Favorites
Call Controls
• Mobile Phonebook
The touchscreen allows you to control the following call
features:
• Recent Call Log
• SMS Message Viewer
• Answer
• End
• Ignore
PHONE MODE 51
• Hold/unhold
Recent Calls
• Mute/unmute
You may browse up to 31 of the most recent of each of the
following call types:
• Transfer the call to/from the phone
• Swap two active calls
• Join two active calls together
Touch-Tone Number Entry
1. Press the “Phone” button on the touchscreen.
2. Press the “Dial” button on the touchscreen.
3. The Touch-Tone screen will be displayed.
4. Use the numbered buttons on the touchscreens to enter
the number and press “Call.”
If your vehicle has two buttons on the steering wheel (VR
button on your steering
and Phone), press the VR
wheel to send a touch-tone. If your vehicle has three
buttons on the steering wheel (VR, Phone Send, and
Phone End), press the Phone Send button on your
steering wheel to send a touch-tone and say “Send
1234#” or you can say “Send Voicemail Password” if
Voicemail password is stored in your mobile phonebook.
• All Calls
• Incoming Calls
• Outgoing Calls
• Missed Calls
These can be accessed by pressing the “recent calls” button
on the Phone main screen.
button on your steering wheel
You can also push the
and say “Show my incoming calls” from any screen and
the Incoming calls will be displayed.
NOTE: Incoming can also be replaced with “Outgoing,”
“Recent” or “Missed.”
Answer Or Ignore An Incoming Call — No Call
Currently In Progress
When you receive a call on your mobile phone, the
Uconnect Phone will interrupt the vehicle audio system.
button on the steering wheel to accept
Push the Phone
the call. You can also press the “answer” button on the
touchscreen or press the caller ID box.
5
52 PHONE MODE
Answer Or Ignore An Incoming Call — Call
Currently In Progress
Automatic reply messages can be:
If a call is currently in progress and you have another
incoming call, you will hear the same network tones for
call waiting that you normally hear when using your
button on
mobile phone. Press the “Uconnect Phone”
the steering wheel, answer button on the touchscreen or
caller ID box to place the current call on hold and
answer the incoming call.
• Create a custom auto reply message up to 160 characters.
NOTE: The Uconnect Phone compatible phones in the
market today do not support rejecting an incoming call
when another call is in progress. Therefore, the user can
only answer an incoming call or ignore it.
Do Not Disturb
With Do Not Disturb, you can disable notifications from
incoming calls and texts, allowing you to keep your eyes
on the road and hands on the wheel. For your convenience,
there is a counter display to keep track of your missed calls
and text messages while you were using Do Not Disturb.
Do Not Disturb can automatically reply with a text message, a call or both, when declining an incoming call and
send it to voicemail.
• “I am driving right now, I will get back to you shortly.”
NOTE: Only the first 25 characters can been seen on the
touchscreen while typing a custom message.
While in Do Not Disturb, Conference Call can be selected
so you can still place a second call without being interrupted by incoming calls.
NOTE:
• Reply with text message is not compatible with iPhones.
• Auto reply with text message is only available on
phones that supporting Bluetooth MAP.
Place/Retrieve A Call From Hold
During an active call, press the “Hold” button on the
Phone main screen.
PHONE MODE 53
Making A Second Call While Current Call Is In
Progress
You can place a call on hold by pressing the “Hold” button
on the Phone main screen, then dial a number from the
dialpad, recent calls, SMS Inbox or from the phonebooks.
To go back to the first call, refer to “Toggling Between
Calls” in this section. To combine two calls, refer to “Join
Calls” in this section.
Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the “Swap” button on the Phone main screen. Only
one call can be placed on hold at a time.
button to toggle between
You can also push the Phone
the active and held phone call.
Join Calls
When two calls are in progress (one active and one on
hold), press the “Join Calls” button on the Phone main
screen to combine all calls into a Conference Call.
Call Termination
To end a call in progress, momentarily press the Phone
“End”
button on the touchscreen or the Phone “End”
button on the steering wheel. Only the active call(s) will
be terminated and if there is a call on hold, it will
become the new active call.
Redial
Press the “Redial” button on the touchscreen, or push the
Phone
button and after the “Listening” prompt and
the following beep, say “Redial.”
The Uconnect Phone will call the last number that was
dialed from your mobile phone.
Call Continuation
Call continuation is the progression of a phone call on the
Uconnect Phone after the vehicle ignition key has been
switched to OFF.
NOTE: The call will remain within the vehicle audio
system until the phone becomes out of range for the
Bluetooth connection. It is recommended to press the
“transfer” button on the touchscreen when leaving the
vehicle.
5
54 PHONE MODE
Advanced Phone Connectivity
• Always wait for the beep before speaking.
Transfer Call To And From Mobile Phone
• Speak normally, without pausing, just as you would
speak to a person sitting a few feet/meters away from
you.
The Uconnect Phone allows ongoing calls to be transferred
from your mobile phone to the Uconnect Phone without
terminating the call. To transfer an ongoing call from your
connected mobile phone to the Uconnect Phone or vice
versa, press the “Transfer” button on the Phone main
screen.
Connect Or Disconnect Link Between The Uconnect
Phone And Mobile Phone
• Ensure that no one other than you is speaking during a
voice command period.
Performance is maximized under:
• Low-To-Medium Blower Setting
• Low-To-Medium Vehicle Speed
If you would like to connect or disconnect the Bluetooth
connection between a Uconnect Phone paired mobile
phone and the Uconnect Phone, follow the instructions
described in your mobile phone User’s Manual.
• Low Road Noise
Things You Should Know About Your Uconnect
Phone
• Dry Weather Condition
Voice Command
For the best performance:
• Adjust the rearview mirror to provide at least ½ inch
(1 cm) gap between the overhead console (if equipped)
and the mirror.
• Smooth Road Surface
• Fully Closed Windows
WARNING!
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
(Continued)
PHONE MODE 55
WARNING! (Continued)
related to the use of the Uconnect features and applications in this vehicle. Only use Uconnect when it is
safe to do so. Failure to do so may result in an accident
involving serious injury or death.
Even though the system is designed for many languages
and accents, the system may not always work for some.
NOTE: It is recommended that you do not store names in
your favorites phonebook while the vehicle is in motion.
Phonebook (Mobile and Favorites) name recognition rate is
optimized when the entries are not similar. You can say
“O” (letter “O”) for “0” (zero).
Even though international dialing for most number combinations is supported, some shortcut dialing number
combinations may not be supported.
Far End Audio Performance
Audio quality is maximized under:
• Low-To-Medium Blower Setting
• Low-To-Medium Vehicle Speed
• Low Road Noise
• Smooth Road Surface
• Fully Closed Windows
• Dry Weather Conditions
• Operation From The Driver’s Seat
Performance such as audio clarity, echo, and loudness to a
large degree rely on the phone and network, and not the
Uconnect Phone.
Echo at the far end can sometimes be reduced by lowering
the in-vehicle audio volume.
In a convertible vehicle, system performance may be
compromised with the convertible top down.
Voice Text Reply
Once your Uconnect system is paired with a compatible
mobile device, the system can announce a new incoming
text message, and read it to you over the vehicle audio
system. You can reply to the message using Voice Recognition, by selecting, or saying one of the 18 pre-defined
messages.
and
Here’s how: Push the “Uconnect Phone” button
wait for the beep, then say “reply.” Uconnect will give
the following prompt: “Please say the message you
5
56 PHONE MODE
would like to send.” Wait for the beep and say one of the
pre-defined messages. (If you are not sure, you can say
“help”). Uconnect will then read the pre-defined messages allowed. As soon as you hear the message you
would like to send, you can interrupt the list of prompts
by pushing the “Uconnect Phone” button and saying
the phrase. Uconnect will confirm the message by
reading it back to you. Then push the “Uconnect Phone”
button and say “Send.”
“Yes.”
“I’ll call you
later.”
“I’m on my
way.”
“I’ll be late.”
“Thanks.”
“Start without
me.”
“Where are
you?”
“I can’t talk
right now.”
“Stuck in
traffic.”
“No.”
“Call me.”
“Okay.”
“Are you there
yet?”
“See you later.”
“I’m lost.”
“I need directions.”
“See you in
<number> minutes.”
“I will be <number>
minutes late.”
Voice Texting Reply and Voice Texting features require a
compatible mobile device enabled with Bluetooth Message
Access Profile (MAP). Some smartphones do not currently
support Bluetooth MAP. Visit UconnectPhone.com for
system and device compatibility.
Voice Texting (Must Be Registered With Uconnect
Access And Have A Current Subscription, U.S.
Residents Only)
WARNING!
ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume
all risks related to the use of the Uconnect features
and applications in this vehicle. Only use Uconnect
when it is safe to do so. Failure to do so may result
in an accident involving serious injury or death.
Want to dictate a personal message? Register with
Uconnect Access to take advantage of a new, cloud-based
Voice Texting service, an enhancement to Voice Text Reply.
PHONE MODE 57
Voice Texting allows you to compose a new text or reply to
an incoming text message. Before you attempt to use the
Voice Texting feature, check to ensure you have the following:
1. A Paired, Bluetooth enabled phone with the Message
Access Profile (MAP). Not all Bluetooth enabled phones
support MAP. Visit UconnectPhone.com for system
and device compatibility information.
2. An active Uconnect Access trial or paid subscription.
” button on the touchscreen to
Press the “Apps
begin the registration process.
3. Accept the Allow MAP profile request on your smart
phone. (Please refer to device manufacturer instructions
for details).
To Send A Text Message:
1. Push the Uconnect Phone button.
2. Wait for the beep.
3. Say “Text.”
4. Uconnect will prompt you “Say the phone number, or
full name and phone type of the contact you want to
send a message to.”
5. Wait for the beep and say a contact that is in your
phonebook, or a mobile phone number that you would
like to send the message to.
6. Uconnect will prompt you “Please say the message that
you would like to send” (If you do not hear this prompt,
you may not have an active subscription with Uconnect
Access).
7. Wait for the beep, and then dictate any message up to
140 characters. If you exceed 140 characters, you will
hear the following prompt: “Message was too long; your
message will be truncated.”
8. Uconnect will then repeat the message back to you.
9. Uconnect will prompt you: To add to your message, say
“Continue”; to delete the current message and start
over, say “Start Over”; to send the current message, say
“Send”; to hear the message again, say “Repeat.”
10. If you are happy with your message and would like to
send it, wait for the beep and say “Send.”
11. Uconnect will then say “Sending your message.”
5
58 PHONE MODE
Sample Commands for Voice Text Reply and Voice Texting
Example Command
Action
“Text John Smith”
Send a message to specific contact in address book
“Text 123 - 456 - 7890”
Send 123 - 456 - 7890 a message from your phonebook
“Show messages”
See recent text messages listed by number on Uconnect
screen
“Listen to/view (message number four, for example)”
Hear messages or read it on Uconnect screen
“Reply”
Send a voice text reply to a current message
“Forward text/message to John Smith”
Forward current text to specific contact in address book
“Forward text/message to 123 - 456 - 7890”
Forward current text to specific phone number
Bluetooth Communication Link
General Information
Mobile phones have been found to lose connection to the
Uconnect Phone. When this happens, the connection can
generally be re-established by switching the mobile phone
OFF/ON. Your mobile phone is recommended to remain in
Bluetooth ON mode.
This device complies with Part 15 of the FCC rules and RSS
210 of Industry Canada. Operation is subject to the following conditions:
Power-Up
After switching the ignition key from OFF to either the ON
or ACC position, or after a language change, you must wait
at least 15 seconds prior to using the system.
• Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.
NAVIGATION MODE — IF EQUIPPED
CONTENTS
䡵 NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . .60
▫ Emergency . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
▫ Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . .60
▫ Map Updates . . . . . . . . . . . . . . . . . . . . . . . . .101
▫ Where To? . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
䡵 SIRIUSXM TRAFFIC — U.S. MARKET . . . . . . . . .102
▫ View Map . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
䡵 SIRIUSXM TRAVEL LINK — U.S. MARKET . . . . .102
▫ Information . . . . . . . . . . . . . . . . . . . . . . . . . . .93
6
60 NAVIGATION MODE — IF EQUIPPED
NAVIGATION
Main Menu
To access the Navigation system, press the ⬙Nav⬙ button on
the touchscreen.
• Press “Emergency” to search for Hospitals, Police and
Fire Stations near your current location. You can also
display your current location and save any Emergency
facility location to your Favorites.
• Press “Stop” to stop a route.
• Press “Detour” to detour a route.
Where To?
Where To? — Main Menu
• Press “Where To?” to find or route to a destination.
• Press “View Map” to view the map.
• Press “Information” to view Traffic, Where Am I? and
Trip Computer information.
NAVIGATION MODE — IF EQUIPPED 61
From the Nav Main Menu, press the “Where To?” button
on the touchscreen and select one of the following methods
to program a route guidance.
Intersection
Press this button on the touchscreen to enter in two street
names as a destination.
NOTE: Refer to the individual section of the chosen option
for further information.
Go Home
Address
Press this button on the touchscreen to program or confirm
a route to the saved home address.
Press this button on the touchscreen to search by a street
address or a street name with house number.
Trips
Recent
Press this button on the touchscreen to program a new trip
or recall a saved trip.
Press this button on the touchscreen to access previously
routed addresses or locations.
GEO Coordinates
Point of Interest
Press this button on the touchscreen when you want to
route to a point of interest. The Point of Interest (POI)
database allows you to select a destination from a list of
locations and public places, or points of interest.
Favorites
Press this button on the touchscreen to access previously
saved addresses or locations.
Press this button on the touchscreen to route to a GEO
Coordinate. A geo coordinate is a coordinate used in
geography. You can determine a geo coordinate with the
help of a handheld GPS receiver, a map, or the navigation
system.
Point on Map
Press this button on the touchscreen to select a destination
directly from the Map screen. By selecting a street segment
or icon, you can quickly enter a destination without the
need to input the city name or street.
6
62 NAVIGATION MODE — IF EQUIPPED
City Center
Where To? — Address
Press this button on the touchscreen to route to a particular
city. The navigation system will calculate a route with the
destination at the center of the city.
To enter a destination by Address, follow these steps:
Trails
Press the “Trails” button on the touchscreen and select the
option to start trail recording to track the route you are
driving. Select the option to ⬙stop trail recording⬙ to end
tracking. This gives you a point of reference to a particular
route if needed.
Closest City
Press this button on the touchscreen to route to a nearby
city. The screen will display an alphabetical listing of
nearby cities. The navigation system will calculate a route
with the destination at the center of the nearby city.
Phone Number
Press this button on the touchscreen to route to a location
or point of interest by the phone number.
NOTE: You can press the “back” arrow button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen, then press the “Address”
button on the touchscreen.
NAVIGATION MODE — IF EQUIPPED 63
2. Press “Enter City” or “Enter Street” to begin entering
the address of your destination.
To change the state and/or country, press the “state,
country” button on the touchscreen and follow the
prompts to change the state and/or country.
6
If you press “Enter City,” you will have to enter and
select/press the desired city name, followed by the
desired street name then the house number.
If you press “Enter Street,” you will have to enter and
select/press the desired street name in the correct city
and then you will have to enter the house number.
Once the correct City, Street and Number has been
entered, you will be asked to confirm your destination
by pressing “OK.”
64 NAVIGATION MODE — IF EQUIPPED
3. Press the “Yes” button on the touchscreen to confirm
your destination and begin your route.
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Where To? — Recent
To route to a Recent destination, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen, then press the “Recent”
button on the touchscreen.
If you are currently on a route guidance and you select
Recent, the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
NAVIGATION MODE — IF EQUIPPED 65
2. Press the button on the touchscreen with the name of the
desired destination.
To display the options for a destination press the “Options” button on the touchscreen that looks like a gear.
6
3. Confirm the route with “Yes” to start the route guidance.
To delete a destination from the list, press the “Trash
Can Icon” button on the touchscreen.
66 NAVIGATION MODE — IF EQUIPPED
The following Options are available for each destination:
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Where To? — Point of Interest
To enter a destination by Point of Interest (POI), press the
“Where To?” button from the Nav Main Menu, then press
the “Point of Interest” button on the touchscreen.
• Edit Name
• Add Phone Number
• Move Up in the list
• Move Down in the list
• Place Pin on the location (saves the spot on the list)
NAVIGATION MODE — IF EQUIPPED 67
The Point of Interest database allows you to select a
destination from a list of locations and public places, or
points of interest.
You have the following POIs to choose from:
• Gas Stations
• Restaurants
• Hotels/Motels
• ATM/Banking
6
• All POIs
• Spell POI Name
You can also change your POI search area, by pressing the
“Change Search Area” button on the touchscreen. You will
have the following options to change your search area:
• Around Me
• In a City
68 NAVIGATION MODE — IF EQUIPPED
• Near Destination (only available during route guidance)
Where To? — Favorite Destinations
• Along Route (only available during route guidance)
To route to a Favorite destination, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen, then press the “Favorites”
button on the touchscreen.
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
2. Press the button on the touchscreen with the name of the
desired favorite destination and confirm the route with
Yes to start the route guidance.
NAVIGATION MODE — IF EQUIPPED 69
3. To delete a destination from the list, press the “Trash
Can Icon” button on the touchscreen.
Where To? — Intersection
4. To save a favorite destination, press the “Add Favorite”
button on the touchscreen and follow the steps to route
a destination.
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen, then press the “Intersection”
button on the touchscreen.
To enter a destination by Intersection, follow these steps:
5. To display the options for a favorite destination press
the “Options” button on the touchscreen that looks like
a gear.
The following Options are available for each favorite
destination:
• Edit Name
• Add Phone Number
6
If you are currently on a route guidance and you select a
Favorite, the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
2. Press the “Enter City” button, to enter the desired city
name.
70 NAVIGATION MODE — IF EQUIPPED
NOTE: If the system automatically recognizes the city it
will populate a list of recognized cities, if not press the
“List” button to select from the available options.
NOTE: If the system automatically recognizes the street it
will populate a list of recognized streets, if not press the
“List” button to select from the available options.
4. Press the “Yes” button on the touchscreen to confirm
your destination and begin your route.
If you are currently on a route guidance and you select a
Intersection, the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
3. Once the correct City has been selected, you will be
asked to spell the desired street name, then enter the
intersecting street.
NAVIGATION MODE — IF EQUIPPED 71
Where To? — Go Home
To enter your Home Address, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “Go Home”
button on the touchscreen.
2. To set your Home Address choose one of the following
options:
NOTE: Refer to the individual section of the chosen option
for further information.
• Address
• Recent
• Point of Interest
• Favorites
• Intersection
• GEO Coordinates
• Point on Map
• City Center
• Closest Cities
• Phone Number
Once you have generated your Home Address, you will be
asked to Save it.
3. Press the “Save” button on the touchscreen to confirm
your destination and begin the route to your Home
Address.
If there is no Home Address entered, press “Yes” to
enter it now.
4. This address will be saved as your Home Address and it
can be accessed by pressing the “Go Home” button in
the Where To? Menu.
6
72 NAVIGATION MODE — IF EQUIPPED
Change/Delete Your Home Address
Where To? — Trips
To change or delete your current Home Address perform
the following:
To route to a saved Trip, follow these steps:
1. Press the “Go Home” button in the Where To? Menu.
2. Press the “Options” button at the bottom of the displayed map.
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “Recent”
button on the touchscreen.
3. Press “Clear Home” and then press “Yes” to clear/
delete your Home Address.
4. To enter in a new Home Address, follow the Where To?
– Go Home procedure.
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
2. Press the “Trips” button on the touchscreen.
NAVIGATION MODE — IF EQUIPPED 73
3. Press “Add Destination” to add destinations to your
trip.
4. Choose from the following options to add a destination
• Address
• Recent
• Point of Interest
• Favorites
• Intersection
• GEO Coordinates
• Point on Map
• City Center
• Closest Cities
• Phone Number
3. Press the button on the touchscreen with the name of the
desired Trip and press the first destination in the list.
NOTE: Refer to the individual section of the chosen option
for further information.
4. Confirm the route by pressing “Yes” to start the route
guidance.
5. Add more needed destinations to your trip.
To add a Trip, follow these steps:
NOTE: Each destination will be listed in order, with the
last destination being the final destination.
1. Press the “Create new Trip” button on the touchscreen.
6. Your new Trip will appear on the Trips list.
2. Type in the new Trip Name.
To delete a Trip from the list, press the “Trash Can Icon”
button on the touchscreen.
6
74 NAVIGATION MODE — IF EQUIPPED
To display the options for a trip press the “Options” button
on the touchscreen that looks like a gear.
Where To? — GEO Coordinate
The following Options are available for each trip:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “GEO Coordinate” button on the touchscreen.
• Edit Name
• Move Up in the list
• Move Down in the list
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
To route to a saved Trip, follow these steps:
NAVIGATION MODE — IF EQUIPPED 75
2. Enter the Latitude by typing in the numbers. Use the left
and right arrows to select specific numbers in the
location shown.
4. Enter the Longitude by typing in the numbers. Use the
left and right arrows to select specific numbers in the
location shown.
5. Press “OK” to confirm the destination.
6. Press the “Yes” button on the touchscreen to confirm
your destination and begin your route.
If you are currently on a route guidance and you select a
Geo Coordinate, the system will ask you to choose one of
the following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Press the “Format” button on the touchscreen to change
the format of the Latitude/Longitude entry.
3. Press the “OK” button on the touchscreen.
6
76 NAVIGATION MODE — IF EQUIPPED
Where To? — Point on Map
To enter a destination by Point on Map, follow these steps:
2. Use the touchscreen to drag the center of the cross over
the desired destination.
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “Point on
Map” button on the touchscreen.
3. Either press the “address bar” at the top center of the
screen to confirm your location, or press the “Details”
button in the upper right corner to display the available
locations near that point on the map.
4. Press the “Yes” button on the touchscreen to confirm
your destination and begin your route.
NAVIGATION MODE — IF EQUIPPED 77
If you are currently on a route guidance and you select a
Point on Map, the system will ask you to choose one of the
following:
Where To? — City Center
• Cancel previous route
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “City Center”
button on the touchscreen.
• Add as first destination
To enter a destination by City Center, follow these steps:
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
6
78 NAVIGATION MODE — IF EQUIPPED
2. Enter the name of the City you would like to route to.
If you are currently on a route guidance and you select a
City Center, the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
3. Press the desired city from the list.
4. Press the “Yes” button on the touchscreen to confirm
your destination and begin your route.
NAVIGATION MODE — IF EQUIPPED 79
Where To? — Closest Cities
2. Press the desired city from the list.
To enter a destination by Closest City, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “Closest City”
button on the touchscreen.
6
3. Press the “Yes” button on the touchscreen to confirm
your destination and begin your route.
80 NAVIGATION MODE — IF EQUIPPED
If you are currently on a route guidance and you select a
Closest City, the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Where To? — Trails
When starting to drive a trail you want to record, follow
these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “Trails” button
on the touchscreen.
NAVIGATION MODE — IF EQUIPPED 81
2. Press “Start Trail Recording.”
Where To? — Phone
To enter a destination by Phone number, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “Phone Number” button on the touchscreen.
6
3. When you want to end the recording of a route, press
“Stop Trail Recording.”
The trip you recorded will be added to the Recent Trails
list.
2. Enter the Phone Number of the destination you would
like to route to.
3. Press the desired destination from the list.
82 NAVIGATION MODE — IF EQUIPPED
4. Press the “Yes” button on the touchscreen to confirm
your destination and begin your route.
If you are currently on a route guidance and you select a
Phone number destination, the system will ask you to
choose one of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Before Route Guidance
Before confirming the route with the “Yes” button on the
touchscreen, it is possible to select options different from
the default route settings.
• Options – Press the “Options” button on the touchscreen
to display a list of options to alter your route. To make a
selection press and release the desired setting until a
check-mark appears.
NAVIGATION MODE — IF EQUIPPED 83
• Avoid – Press the “Avoid” button on the touchscreen to
choose road types to avoid during your route. To make
a selection press and release the desired setting until a
check-mark appears.
6
84 NAVIGATION MODE — IF EQUIPPED
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
View Map
View Map — Main Menu
Press the “View Map” button from the Nav Main Menu to
display a map of your current position.
NOTE: Since toll roads, tunnels and ferries are built for the
purpose of shortening travel distances, avoiding these road
types may increase distance and travel time.
• Save – Press the “Save” button on the touchscreen to
save the destination as a Favorite.
Press the “Yes” button on the touchscreen to confirm your
destination and to start your route guidance.
NAVIGATION MODE — IF EQUIPPED 85
With the map displayed you have the following features
available:
Menu
Press this button on the touchscreen to return to the Nav
Main Menu.
Zoom In +/Zoom Out –
Press the “Zoom In (+) or Zoom Out (–)” buttons on the
touchscreen to change the zoom level. Roads with lower
functional classification are not shown in higher zoom
levels. (e.g. residential streets, lightly-traveled county
roads.)
Time of Arrival/Time to Destination/Distance (only during route guidance)
Press the button in the upper right area of the screen to the
display items available. Press the desired option button on
the touchscreen.
• Time of Arrival
• Time to Destination
• Distance
Turn List (only during route guidance)
Press the area in the upper center part of the screen that
displays your next turn to see a Turn List for your current
route.
Press a turn in the displayed Turn List for the following
options:
• Show on Map
• Avoid Street
Options (only during route guidance)
Press the “Options” button on the touchscreen to display
the following options. Press the desired button on the
touchscreen.
• 2D North Up/Map View 2D/Map View 3D (3D Available On 3C NAV)
Press this button on the touchscreen to scroll between the
three viewing options.
• Settings
Press this button on the touchscreen to view all the
available settings. See View Map – Settings for more
information.
6
86 NAVIGATION MODE — IF EQUIPPED
• Repeat
Press this button on the touchscreen to repeat the current
voice prompt.
• Press the “Save” button on the touchscreen to save the
location in your Favorites.
• Turn List
Press this button on the touchscreen to view the turn list for
the current route.
• Stop Guidance
Press this button on the touchscreen to stop route guidance.
Where Am I?
Press the area in the lower center part of the screen that
displays your current location to view the Where Am I?
view.
Where Am I? displays the address and GEO Coordinates of
your current location.
• Press the “GPS” button on the touchscreen to view the
GPS information.
You can press the “back” arrow button on the touchscreen
to return to the previous screen or the “X” button on the
touchscreen to exit.
NAVIGATION MODE — IF EQUIPPED 87
View Map — Settings
With the Map displayed, press the “Options” button on the
touchscreen then press the “Settings” button on the touchscreen.
6
The following Map Settings are available:
• Map Setup — Press this button on the touchscreen to
display items to customize how your map is viewed.
Settings – Map Setup for more information.
• Speed Limit — Press this button on the touchscreen to
turn on/off speed limit warning announcements and to
enter a pre-defined speed limit for your route.
88 NAVIGATION MODE — IF EQUIPPED
• Guidance — Press this button on the touchscreen to
display items to customize your route guidance. Settings
– Guidance Options for more information.
• Units — If Equipped — Press this button on the
touchscreen to change the units display. Press the desired button on the touchscreen.
• U.S. (mile/feet)
• Imperial (mile/yard)
• Metric (meter)
• GPS (DMS) — Press this button on the touchscreen to
change the GPS display. Press the desired button on the
touchscreen.
• Decimal
• DMS
• DM
Copy device information to USB? (If Equipped) — Press
this button on the touchscreen to copy your radio information to a USB jump drive through the available USB port.
Settings — Map Setup
With the Map displayed, press the “Options” button on the
touchscreen, then press the “Settings” button on the touchscreen and then the “Map Setup” button on the touchscreen.
NAVIGATION MODE — IF EQUIPPED 89
• 2D
Orientation
Press this button on the touchscreen to change how the
Map Orientation is displayed. Press the desired button on
the touchscreen.
• North Up
• Heading Up
Current Street
Press this button on the touchscreen to turn on/off the
current street display on the lower center of the Map View.
Press and release the button on the touchscreen until a
check-mark appears, showing the setting has been selected.
The following Map Setup options are available:
Destination Information
Map View
Press this button on the touchscreen to change the Destination Information that is displayed in the upper right
corner of the Map View. Press the desired button on the
touchscreen.
Press this button on the touchscreen to change how the
Map View is displayed. Press the desired button on the
touchscreen.
• 3D (3D Map View Is Only Available On Uconnect 3C
NAV. Must Select 3D City Models Or 3D Landmarks For
3D Map View To Display.)
• Time of Arrival
• Time to Destination
• Distance
6
90 NAVIGATION MODE — IF EQUIPPED
AutoZoom
POI Icon List
Press this button on the touchscreen to change how the
AutoZoom feature adjust the zoom level during guidance
in Map View. Press the desired button on the touchscreen.
Press this button on the touchscreen to display the available Point of Interest icons you would like displayed while
in Map View. Press and release the desired selection button
on the touchscreen until a check-mark appears, showing
the setting has been selected.
• Far
• Normal
• Near
• Off
Vehicle Icon
Press this button on the touchscreen to change the vehicle
icon that is displayed while in Map View. Press Previous or
Next to view the available icons. Press the back icon button
on the touchscreen when you’ve made you selection.
Show POI Icons
Press this button on the touchscreen to show the selected
Point of Interest icons while in Map View. Press and release
the button on the touchscreen until a check-mark appears,
showing the setting has been selected.
TMC Incidents – If Equipped
Press this button on the touchscreen to show Traffic Message Channel (TMC) Incidents while in Map View. Press
and release the button on the touchscreen until a checkmark appears, showing the setting has been selected.
Speed and Flow
Press this button on the touchscreen to show the Speed and
Flow of traffic while in Map View. Press and release the
button on the touchscreen until a check-mark appears,
showing the setting has been selected.
3D City Models (Available On The Uconnect 3C NAV)
Press this button on the touchscreen to display 3D city
models while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected.
NAVIGATION MODE — IF EQUIPPED 91
3D Landmarks (Available On The Uconnect 3C NAV)
City Areas
Press this button on the touchscreen to display 3D landmarks while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected. Next, change Map View to 3D by
selecting Navigation Options - Settings - Map Setup - Map
View.
Press this button on the touchscreen to display City Areas
while in Map View. Press and release the button on the
touchscreen until a check-mark appears, showing the setting has been selected.
Digital Terrain Model (3C NAV Only)
Press this button on the touchscreen to display the areas
terrain while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected.
Park Areas
Press this button on the touchscreen to display Park Areas
while in Map View. Press and release the button on the
touchscreen until a check-mark appears, showing the setting has been selected.
Railroads
Press this button on the touchscreen to display Railroad
tracks while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected.
River Names
Press this button on the touchscreen to display River
Names while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected.
You can press the “back arrow” button on the touchscreen
to return to the previous screen or the “X” button on the
touchscreen to exit.
Settings — Guidance
With the Map displayed, press the “Options” button on the
touchscreen, then press the “Settings” button on the touchscreen and then the “Guidance” button on the touchscreen.
You can also access this menu by pressing the “Settings”
button in the lower right of the Nav Main Menu.
6
92 NAVIGATION MODE — IF EQUIPPED
The following Guidance options are available.
• Junction View
• Play Voice Guidance Prompts
Press this button on the touchscreen to enable Junction
View during route guidance. Press and release the button
on the touchscreen until a check-mark appears, showing
the setting has been selected.
Press this button on the touchscreen to enable Voice
Guidance Prompts during route guidance. Press and release the button on the touchscreen until a check-mark
appears, showing the setting has been selected.
• Nav Volume Adjustment
Press the “+” or “–” buttons on the touchscreen to adjust
the Nav Voice Prompt Volume.
NOTE: If the NAV Volume Adjustment setting is set
between level 0 and 11 it will default to level 12 on a vehicle
restart, if the NAV Volume Adjustment setting is set
between level 13 and 38 it will RETAIN the setting on a
vehicle restart.
• Lane Recommendation
Press this button on the touchscreen to enable Lane Recommendation during route guidance. Press and release the
button on the touchscreen until a check-mark appears,
showing the setting has been selected.
• Navigation Turn-by-Turn Displayed In Cluster
Press this button on the touchscreen to enable navigation
turn-by-turn displayed in vehicles cluster during route
guidance. Press and release the button on the touchscreen
until a check-mark appears, showing the setting has been
selected.
• TMC Route Mode (If Equipped)
Press this button on the touchscreen to change how the
Traffic Message Channel (TMC) Route Mode functions
during route guidance. Select from:
– Automatic
– By Delay Time
– Manual
– Off
NAVIGATION MODE — IF EQUIPPED 93
• TMC Avoidance Types (If Equipped)
Information
Press this button on the touchscreen to display the available Traffic Message Channel (TMC) Avoidance Types you
would like displayed while in route guidance. Press and
release the desired selection button on the touchscreen
until a check-mark appears, showing the setting has been
selected.
From the Nav Main Menu, press the “Information” button
on the touchscreen and select one of the following options
to view additional information.
• Avoid
• Trip Computer
Press the Avoid button on the touchscreen to choose road
types to avoid during your route. To make a selection press
and release the desired setting until a check-mark appears.
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
• Traffic
• Where Am I?
6
94 NAVIGATION MODE — IF EQUIPPED
Information — SiriusXM Traffic (U.S. MARKET 3C
NAV ONLY)
To select SiriusXM Traffic information, follow these steps:
1. While in the Nav Main Menu, press the “Information”
button on the touchscreen.
Information — Where Am I?
To select “Where Am I?” information, follow these steps:
1. While in the Nav Main Menu, press the “Information”
button on the touchscreen.
2. Press the “Where Am I?” button on the touchscreen.
2. Press the “Traffic” button on the touchscreen.
Traffic displays detailed traffic information, refer to
SiriusXM Traffic in this section for further information.
Where Am I? displays the address and GEO Coordinates of your current location.
NAVIGATION MODE — IF EQUIPPED 95
3. Press the “GPS” button on the touchscreen to view the
GPS information.
4. Press the “Save” button on the touchscreen to save the
location in your Favorites.
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Information — Trip Computer
To select “Trip Computer” information, follow these steps:
6
1. While in the Nav Main Menu, press the “Information”
button on the touchscreen.
2. Press the “Trip Computer” button on the touchscreen.
Trip Computer displays the following trip information
from your last trip:
• Travel Direction
• Distance to final Destination
• Vehicle Speed
• Distance Traveled
• Overall average speed
• Moving average speed
96 NAVIGATION MODE — IF EQUIPPED
• Maximum speed reached
• Total time traveled
• Travel time spent moving
• Travel time spent stopped
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Emergency
Emergency — Main Menu
From the Nav Main Menu, press the “Emergency” button
on the touchscreen and press one of the following options
to search and route to a specific location.
• Hospital – Search and route to a Hospital close to your
current location
• Police – Search and route to a Police Station close to your
current location
• Fire Department – Search and route a Fire Department
close to your current location
Press the “Location” button on the touchscreen to display
your exact current location.
Press the “Save” button on the touchscreen to save your
current location in Favorites.
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
NAVIGATION MODE — IF EQUIPPED 97
Emergency — Hospital
2. Press the “Hospital” button on the touchscreen.
To search for a Hospital close to your current location,
follow these steps:
1. While in the Nav Main Menu, press the “Emergency”
button on the touchscreen.
6
You can search for a Hospital by the following categories, which are button tabs at the top of the screen.
• Name
• Distance
• ABC (Search)
NOTE: In case of emergency, please contact the facility to
verify their availability before proceeding.
98 NAVIGATION MODE — IF EQUIPPED
3. Press the desired Hospital and press “Yes” to confirm
the destination.
If you are currently on a route guidance and you select a
Hospital the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Emergency — Police
To search for a Police Station close to your current location,
follow these steps:
1. While in the Nav Main Menu, press the “Emergency”
button on the touchscreen.
NAVIGATION MODE — IF EQUIPPED 99
2. Press the “Police” button on the touchscreen.
3. Press the desired Police Station and press “Yes” to
confirm the destination.
If you are currently on a route guidance and you select a
Police Station the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
You can search for a Police Station by the following
categories, which are button tabs at the top of the screen.
• Name
• Distance
• ABC (Search)
NOTE: In case of emergency, please contact the facility to
verify their availability before proceeding.
6
100 NAVIGATION MODE — IF EQUIPPED
Emergency — Fire Department
2. Press the “Fire Department” button on the touchscreen.
To search for a Fire Department close to your current
location, follow these steps:
1. While in the Nav Main Menu, press the “Emergency”
button on the touchscreen.
You can search for a Fire Department by the following
categories, which are button tabs at the top of the screen.
• Name
• Distance
• ABC (Search)
NOTE: In case of emergency, please contact the facility to
verify their availability before proceeding.
NAVIGATION MODE — IF EQUIPPED 101
3. Press the desired Fire Department and press “Yes” to
confirm the destination.
If you are currently on a route guidance and you select a
Fire Department the system will ask you to choose one of
the following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Map Updates
The map data available in your vehicle is the most up-todate information that was available when your vehicle was
built. Map data is updated periodically as map information
changes. Follow the steps below if you wish to obtain an
update for your vehicle.
1. Depending on the vehicle you own, please visit
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Canadian
Residents) to obtain your map update. Click the “Owners” tab at the top of the page. At the bottom of the page
(website footer) under “Multimedia Systems” select
NAVTEQ Navigation Updates. Simply enter your information and place your order.
2. Or, visit DriveUconnect.com (U.S. Residents) or
DriveUconnect.ca (Canadian Residents) and follow
these steps:
• Under the “Help & Support” tab, select your vehicle
brand. Click “NAVTEQ NAVIGATION UPDATES.”
Simply enter your information and place your order.
3. Or, if you wish, you can also visit your dealer or place a
phone call to request your Map Update.
US/CAN General Consumer Support:
888-628-6277
FCA US LLC Dealer Garmin Support:
877-628-4480
FCA US LLC Consumer FreshMaps
866-422-8171
6
102 NAVIGATION MODE — IF EQUIPPED
SIRIUSXM TRAFFIC — U.S. MARKET
SIRIUSXM TRAVEL LINK — U.S. MARKET
Don’t drive through traffic. Drive around it.
In addition to delivering over 160 channels of the best
sports, entertainment, talk, and commercial-free music,
SiriusXM offers premium data services that work in conjunction with compatible navigation systems. SiriusXM
Travel Link brings a wealth of useful information into your
vehicle and right to your fingertips.
Avoid congestion before you reach it. By enhancing your
vehicle’s navigation system with the ability to see detailed
traffic information, you can pinpoint traffic incidents, determine average traffic speed and estimate travel time
along your route. Since the service is integrated with a
vehicle’s navigation system, SiriusXM Traffic can help
drivers pick the fastest route based on traffic conditions.
1. Detailed information on traffic speed, accidents, construction, and road closings.
2. Traffic information from multiple sources, including
police and emergency services, cameras and road sensors.
3. Coast-to-coast delivery of traffic information.
4. View conditions for points along your route and beyond.
• Weather — Check variety of local and national weather
information from radar maps to current and five day
forecast.
• Fuel Prices — Check local gas and diesel prices in your
area and route to the station of your choice.
• Sports Scores — In-game and final scores as well as
weekly schedules.
• Movie Listings — Check local movie theatres and listings in your area and route to the theater of your choice.
SiriusXM Travel Link feature is completely integrated into
your vehicle. A few minutes after you start your vehicle,
Travel Link information arrives and updates in the background. You can access the information whenever you like,
with no waiting.
NAVIGATION MODE — IF EQUIPPED 103
• To access SiriusXM Travel Link, press the “Apps
”
button on the touchscreen, then the SiriusXM Travel
Link button on the touchscreen.
NOTE:
• SiriusXM Travel Link requires a subscription, sold separately after the trial subscription included with your
vehicle purchase.
• SiriusXM Travel Link is only available in the continental
United States.
6
VOICE RECOGNITION QUICK TIPS
CONTENTS
䡵 UCONNECT 3C/3C NAV VOICE RECOGNITION
QUICK TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
▫ Introducing Uconnect . . . . . . . . . . . . . . . . . . . .106
▫ Get Started . . . . . . . . . . . . . . . . . . . . . . . . . . .106
▫ Basic Voice Commands . . . . . . . . . . . . . . . . . .107
▫ Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
▫ Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
▫ Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
▫ Voice Text Reply . . . . . . . . . . . . . . . . . . . . . . .110
▫ Climate . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
▫ Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . .112
▫ Uconnect Access . . . . . . . . . . . . . . . . . . . . . . .114
▫ Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
▫ Vehicle Health Report/Alert . . . . . . . . . . . . . . .115
▫ Mobile App . . . . . . . . . . . . . . . . . . . . . . . . . .116
▫ Voice Texting . . . . . . . . . . . . . . . . . . . . . . . . .116
▫ Yelp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
▫ SiriusXM Travel Link . . . . . . . . . . . . . . . . . . . .119
▫ Siri Eyes Free — If Equipped. . . . . . . . . . . . . . .119
▫ General Information . . . . . . . . . . . . . . . . . . . . .122
▫ Additional Information . . . . . . . . . . . . . . . . . . .122
7
106 VOICE RECOGNITION QUICK TIPS
UCONNECT 3C/3C NAV VOICE RECOGNITION
QUICK TIPS
Introducing Uconnect
Start using Uconnect Voice Recognition with these helpful
quick tips. It provides the key Voice Commands and tips
you need to know to control your Uconnect 3C or 3C NAV
systems.
If you see the
icon on your touchscreen, you have the
Uconnect 3C NAV system. If not, you have a Uconnect
3C system.
Get Started
All you need to control your Uconnect system with your
voice are the buttons on your steering wheel.
1. Visit UconnectPhone.com to check mobile device and
feature compatibility and to find phone pairing instructions.
2. Reduce background noise. Wind and passenger conversations are examples of noise that may impact recognition.
3. Speak clearly at a normal pace and volume while facing
straight ahead.
4. Each time you give a Voice Command, you must first
push either the VR or Phone button, wait until after the
beep, then say your Voice Command.
VOICE RECOGNITION QUICK TIPS 107
5. You can interrupt the help message or system prompts
by pushing the VR or Phone button and saying a Voice
Command from current category.
Push the VR button
. After the beep, say:
• “ Cancel” to stop a current voice session
• “ Help” to hear a list of suggested Voice Commands
• “ Repeat” to listen to the system prompts again
Notice the visual cues that inform you of your voice
recognition system’s status. Cues appear above the radio
icon on the touchscreen.
7
Push To Initiate Or To Answer A
1 — Phone Pick up Button
Phone Call, Send Or Receive A Text
Push To Begin Radio, Media,
2 — Voice Recognition Button
Navigation, Apps And Climate Functions
Push To End Call
3 — Phone Hang Up Button
Basic Voice Commands
The basic Voice Commands below can be given at any
point while using your Uconnect system.
108 VOICE RECOGNITION QUICK TIPS
Radio
Use your voice to quickly get to the AM, FM or SiriusXM
Satellite Radio stations you would like to hear. (Subscription or included SiriusXM Satellite Radio trial required.)
Push the VR button
. After the beep, say:
• “ Tune to ninety-five-point-five FM”
• “ Tune to Satellite Channel Hits 1”
TIP: At any time, if you are not sure of what to say or want
to learn a Voice Command, push the VR button and say “
Help.” The system provides you with a list of commands.
Media
Uconnect offers connections via USB, SD, Bluetooth and
auxiliary ports. Voice operation is only available for connected USB and iPod devices. (Remote CD player optional
and not available on all vehicles.)
. After the beep, say one of the
Push the VR button
following commands and follow the prompts to switch
your media source or choose an artist.
VOICE RECOGNITION QUICK TIPS 109
•
•
•
•
“ Change source to Bluetooth”
“ Change source to iPod”
“ Change source to USB”
“ Play artist Beethoven”; “ Play album Greatest Hits”;
“ Play song Moonlight Sonata”; “ Play genre Classical”
TIP: Press the Browse button on the touchscreen to see all
of the music on your iPod or USB device. Your Voice
Command must match exactly how the artist, album, song
and genre information is displayed.
Phone
Making and answering hands-free phone calls is easy with
Uconnect. When the “phonebook” button is illuminated on
your touchscreen, your system is ready. Check
UconnectPhone.com for mobile phone compatibility and
pairing instructions.
Push the Phone button
following commands:
. After the beep, say one of the
• “ Call John Smith”
• “ Dial 123-456-7890 and follow the system prompts”
• “ Redial (call previous outgoing phone number)”
• “ Call back (call previous incoming phone number)”
You can send ”tones” to remove the need of typing into the
keypad when joining a conference call which requires a
, after the beep, say
code. Push the Phone button
“Send” followed by the desired tones; e.g. 49275#.
7
110 VOICE RECOGNITION QUICK TIPS
TIP: When providing a Voice Command, push the Phone
and say “ Call,” then pronounce the name
button
exactly as it appears in your phone book. When a
contact has multiple phone numbers, you can say “ Call
John Smith work.”
Voice Text Reply
Uconnect announces incoming text messages. Push the
Phone button
and say Listen. (Must have compatible
mobile phone paired to Uconnect system.)
1. Once an incoming text message is read to you, push the
. After the beep, say: “ Reply.”
Phone button
2. Listen to the Uconnect prompts. After the beep, repeat
one of the pre-defined messages and follow the system
prompts.
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes.
Stuck in traffic.
See you later.
Start without
I’ll be late.
No.
me.
Okay.
Where are you?
I will be
<number>
minAre you there
Call me.
utes
late.
yet?
I need
See you in
I’ll call you later.
directions.
<number>
minutes.
I’m on my way.
Can’t talk right
now.
I’m lost.
Thanks.
VOICE RECOGNITION QUICK TIPS 111
TIP: Your mobile phone must have the full implementation
of the Message Access Profile (MAP) to take advantage of
this
feature.
For
details
about
MAP,
visit
UconnectPhone.com.
Apple iPhone iOS 6 or later supports reading incoming
text messages only. To enable this feature on your Apple
iPhone, follow these 4 simple steps:
iPhone Notification Setting
1
2
3
4
—
—
—
—
Select “Settings”
Select “Bluetooth”
Select The (i) For The Paired Vehicle
Turn On “Show Notifications”
TIP: Voice Text Reply is not compatible with iPhone, but if
your vehicle is equipped with Siri Eyes Free, you can use
your voice to send a text message.
7
112 VOICE RECOGNITION QUICK TIPS
Climate
Too hot? Too cold? Adjust vehicle temperatures hands-free
and keep everyone comfortable while you keep moving
ahead. (If vehicle is equipped with climate control.)
. After the beep, say one of the
Push the VR button
following commands:
• “ Set driver temperature to 70 degrees”
TIP: Voice Command for Climate may only be used to
adjust the interior temperature of your vehicle. Voice
Command will not work to adjust the heated seats or
steering wheel. (If equipped.)
Navigation
The Uconnect navigation feature helps you save time and
become more productive when you know exactly how to
get to where you want to go. (Navigation is optional on the
Uconnect 3C system. See your dealer to activate navigation
at any time.)
VOICE RECOGNITION QUICK TIPS 113
1. To enter a destination, push the VR button
. After the
beep, say:
• For the 3C Uconnect System, say: “ Enter state”
• For the 3C NAV Uconnect System, say: “ Navigate to
800 Chrysler Drive Auburn Hills, Michigan”
2. Then follow the system prompts.
TIP: To start a POI search, push the VR button
the beep, say “ Find nearest coffee shop.”
. After
7
114 VOICE RECOGNITION QUICK TIPS
Stolen Vehicle Assistance
Uconnect Access
Remote Vehicle Start**
WARNING!
ALWAYS obey traffic laws and pay attention to the
road. Some Uconnect Access services, including 9-1-1
and Assist, will NOT work without an operable
1X(voice/data) or 3G(data) network connection.
NOTE: Your vehicle may be transmitting data as authorized by the subscriber.
An included trial and/or subscription is required to take
advantage of the Uconnect Access services in the next
section of this guide. To register with Uconnect Access,
press the Apps button on the 8.4-inch touchscreen to get
started.
NOTE: Uconnect Access is available only on equipped
vehicles purchased within the continental United States,
Alaska and Hawaii. Services can only be used where
coverage is available; see coverage map for details.
9-1-1 Call
Security Alarm Notification
Remote Door Lock/Unlock
Remote Horn and Lights
Yelp Search
Voice Texting
Roadside Assistance Call
3G Wi-Fi Hotspot***
Vehicle Health Reports**
Vehicle Health Alert**
**If vehicle is equipped.
***Extra charges apply.
VOICE RECOGNITION QUICK TIPS 115
Register
To unlock the full potential of Uconnect Access in your
vehicle, you first need to register with Uconnect Access.
1. Push the ASSIST button on your rearview mirror.
For
further
information
please
www.driveuconnect.com
(U.S.
Residents)
www.driveuconnect.ca (Canadian Residents).
visit
or
Vehicle Health Report/Alert
Your vehicle will send you a monthly email report, which
summarizes the performance of your vehicle’s key systems
so you can stay on top of your vehicle’s maintenance
needs. Your vehicle will also send you Vehicle Health
Alerts when it detects issues with its key systems that need
your attention. For further information go to the Mopar
Owner Connect website moparownerconnect.com.
7
2. Press the “Uconnect Care” button on the touchscreen.
3. A helpful Uconnect Care Agent will register your vehicle and handle all of the details.
Signing up is easy! Simply follow the steps above. Or,
” button on the touchscreen to
press the “Apps
“Register By Web” to complete the process using your
smartphone or computer.
116 VOICE RECOGNITION QUICK TIPS
Mobile App
You’re only a few steps away from using remote commands and sending a destination from your phone to your
vehicle.
• Once on the “Remote” screen, you can begin using
Remote Door Lock/Unlock, Remote Vehicle Start, and
activate your horn and lights remotely, if equipped.
• Press the “Location” button on the bottom menu bar of
the app to bring up a map to locate your vehicle or send
a location to your Uconnect Navigation using Vehicle
Finder and Send ‘N Go , if equipped.
• Press the “Settings” side menu in the upper left corner of
the app to bring up app settings
Voice Texting
1. To send a message, push the Phone button
. After the
beep, say the following command: “ Send message to
John Smith.”
Mobile App
To use the Uconnect Access Mobile App:
• Once you have registered your Uconnect Access services, download the Uconnect Access app to your mobile device. Use your Owner Account login and password to open the app.
2. Listen to the prompt. After the beep, dictate the message
you would like to send. Wait for Uconnect to process
your message.
3. The Uconnect system repeats your message and provide
a variety of options to add to, delete, send or hear the
message again. After the beep, tell Uconnect what you’d
like to do. For instance, if you’re happy with your
message, after the beep, say: “ Send.”
VOICE RECOGNITION QUICK TIPS 117
You must be registered with Uconnect Access and have a
compatible MAP – enabled smartphone to use your voice
to send a personalized text message. For details about
MAP, visit UconnectPhone.com.
Apple iPhone iOS6 or later supports reading incoming text
messages only, but if your vehicle is equipped with Siri
Eyes Free, you can use your voice to send a text message.
To enable this feature on your Apple iPhone, follow these
4 simple steps:
iPhone Notification Setting
1
2
3
4
—
—
—
—
Select “Settings”
Select “Bluetooth”
Select The (i) For The Paired Vehicle
Turn On “Show Notifications”
TIP:
• Voice Texting is not compatible with iPhone, but if your
vehicle is equipped with Siri Eyes Free, you can use your
voice to send a text message.
• Messages are limited to 140 characters.
• The Messaging button on the touchscreen must be
illuminated to use the feature.
7
118 VOICE RECOGNITION QUICK TIPS
Yelp
Once registered with Uconnect Access, you can use your
voice to search for the most popular places or things
around you.
1. Press the “Apps
” button on the touchscreen.
2. Press the “Yelp” button on the touchscreen.
3. Once the YELP home screen appears on the touchscreen,
, then say: “YELP search.”
push the VR button
4. Listen to the system prompts and after the beep, tell
Uconnect the place or business that you’d like Uconnect
to find.
TIP: Once you perform a search, you can reorganize the
results by selecting either the Best Match, Rating or Distance tab on the top of the touchscreen display.
VOICE RECOGNITION QUICK TIPS 119
SiriusXM Travel Link
Need to find a gas station, view local movie listings, check
a sports score or the 5 - day weather forecast? SiriusXM
Travel Link is a suite of services that brings a wealth of
information right to your Uconnect 3C NAV system. (Not
available for 3C system.)
. After the beep, say one of the
Push the VR button
following commands:
• “ Show fuel prices”
• “ Show 5 - day weather forecast”
• “ Show extended weather”
7
TIP: Traffic alerts are not accessible with Voice Command.
Siri Eyes Free — If Equipped
Siri lets you use your voice to send text messages, select
media, place phone calls and much more. Siri uses your
natural language to understand what you mean and will
respond back to confirm your requests. The system is
designed to keep your eyes on the road and your hands on
the wheel by letting Siri help you perform useful tasks.
120 VOICE RECOGNITION QUICK TIPS
To enable Siri push and hold, then release the Uconnect
Voice Recognition (VR) button on the steering wheel. After
you hear a double beep you can ask Siri to play podcasts
and music, get directions, read text messages and many
other useful requests.
Getting Started
Ensure Siri is enabled on your iPhone.
1 — Select Settings On Your
iPhone
2 — Select General
3 — Select Siri
4 — Enable Siri
1. Pair your Siri enabled device to the vehicles sound
system. Refer to “Phone Mode” in for a detailed pairing
procedure.
VOICE RECOGNITION QUICK TIPS 121
• ⬙Read text message from Sarah⬙
• ⬙Take me to the nearest coffee shop⬙
NOTE:
• Speak clearly at a normal pace and volume while
facing straight ahead to ensure your command is
understood.
• Siri is available on iPhone 4S and later.
Voice Recognition/Siri Buttons
1 — Phone Pick up Button
2 — Voice Recognition/Siri Eyes Free Button
3 — Phone Hang Up Button
NOTE: A push and release of the
button will start
normal embedded VR functions. The push and hold,
button will start Siri functions.
then release of the
2. After the double beep, begin speaking to Siri.
Examples of Siri commands and questions:
• ⬙Play Rolling Stones⬙
• ⬙Send text message to John⬙
7
122 VOICE RECOGNITION QUICK TIPS
General Information
Additional Information
This device complies with FCC rules Part 15 and Industry
Canada RSS-210. Operation is subject to the following two
conditions:
© 2017 FCA US LLC. All rights reserved. Mopar and
Uconnect are registered trademarks and Mopar Owner
Connect is a trademark of FCA US LLC. Android is a
trademark of Google Inc. SiriusXM and all related marks
and logos are trademarks of SiriusXM Radio Inc. Yelp, Yelp
logo, Yelp burst and related marks are registered trademarks of Yelp.
1. This device may not cause harmful interference.
2. This device must accept any interference that may be
received including interference that may cause undesired operation.
NOTE:
• The transmitter has been tested and it complies with
FCC and IC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
device.
• The term IC before the certification/registration number
only signifies that Industry Canada technical specifications were met.
For Uconnect system support, call: 1-877-855-8400
(24 hours a day 7 days a week) or visit
DriveUconnect.com
(U.S.
Residents)
or
DriveUconnect.ca (Canadian Residents).
Uconnect Access services support, call: 1-855-792-4241
Please have your Uconnect Security PIN ready when you
call.
ALL ABOUT UCONNECT ACCESS
CONTENTS
䡵 INTRODUCTION TO UCONNECT ACCESS . . . .125
▫ Yelp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
▫ What Is Uconnect Access? . . . . . . . . . . . . . . . .125
▫ Security Alarm Notification . . . . . . . . . . . . . . .143
▫ Included Trial Period For New Vehicles . . . . . . .128
▫ Stolen Vehicle Assistance . . . . . . . . . . . . . . . . .145
▫ Features And Packages . . . . . . . . . . . . . . . . . .129
▫ Vehicle Finder . . . . . . . . . . . . . . . . . . . . . . . . .147
䡵 GETTING STARTED WITH UCONNECT
ACCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
▫ Send ‘N Go . . . . . . . . . . . . . . . . . . . . . . . . . . .149
▫ Registration . . . . . . . . . . . . . . . . . . . . . . . . . .129
▫ Download The Uconnect Access App . . . . . . . .130
▫ Purchasing Apps And 3G Wi-Fi Hotspot For Your
Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
▫ Using Mopar Owner Connect . . . . . . . . . . . . . .130
䡵 USING UCONNECT ACCESS . . . . . . . . . . . . . . .132
▫ Getting Started With Apps . . . . . . . . . . . . . . . .132
▫ 9-1-1 Call . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
▫ Roadside Assistance Call . . . . . . . . . . . . . . . . .138
▫ 3G Wi-Fi Hotspot . . . . . . . . . . . . . . . . . . . . . .150
▫ Voice Texting . . . . . . . . . . . . . . . . . . . . . . . . .153
▫ Remote Door Lock/Unlock . . . . . . . . . . . . . . .159
▫ Remote Vehicle Start . . . . . . . . . . . . . . . . . . . .162
▫ Remote Horn And Lights . . . . . . . . . . . . . . . . .165
▫ Vehicle Health Alert . . . . . . . . . . . . . . . . . . . .167
▫ Over-The-Air Updates — If Equipped . . . . . . . .167
䡵 MAINTAIN MY UCONNECT ACCESS
ACCOUNT . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
8
124 ALL ABOUT UCONNECT ACCESS
▫ How To Remove My Uconnect Access
Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
▫ Adding Vehicles To My Uconnect Access
Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
䡵 UCONNECT CARE AND FAQs . . . . . . . . . . . . .169
▫ Uconnect Care Business Hours: . . . . . . . . . . . .169
▫ Safety Guidelines . . . . . . . . . . . . . . . . . . . . . .173
▫ Safe Usage Of The Uconnect Access System . . . .174
䡵 DEVICE CONNECTION AND AUDIO TIPS WITH
UCONNECT . . . . . . . . . . . . . . . . . . . . . . . . . . .175
ALL ABOUT UCONNECT ACCESS 125
INTRODUCTION TO UCONNECT ACCESS
To unlock the full potential of Uconnect Access in your
vehicle, you first need to register with Uconnect Access.
WARNING!
• ALWAYS obey traffic laws and pay attention to the
road. Some Uconnect Access services, including 9-1-1
and Assist, will NOT work without an operable 1X
(voice/data) or 3G (data) network connection.
• ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume
all risks related to the use of the Uconnect features
and applications in this vehicle. Only use Uconnect
when it is safe to do so. Failure to do so may result in
an accident involving serious injury or death.
continental United States, Alaska and Hawaii. Services can
only be used where coverage is available, see coverage
map for details.
For a complete list of Uconnect Access services, please visit:
DriveUconnect.com
(U.S.
Residents)
or
DriveUconnect.ca (Canadian Residents).
Uconnect Access provides:
• The ability to remotely lock/unlock your doors and start
your vehicle (if equipped) from virtually anywhere, with
the Uconnect Access App, the Mopar Owner Connect
website (moparownerconnect.com) and Uconnect
Care.
• The functionality to turn your vehicle into a 3G Wi-Fi
Hotspot on demand.
• Security Alarm Notification via text or E-mail.
NOTE: Your vehicle may be transmitting data as authorized by the subscriber.
• Yelp to help find great places, businesses and other
locations when you need them.
What Is Uconnect Access?
• Voice Texting so you can compose, send and receive text
messages with your voice while keeping your hands on
the wheel.
Uconnect Access enhances your ownership and driving
experience by connecting your vehicle with an operable 1X
(voice/data) or 3G (data) network. Uconnect Access is
available only on equipped vehicles purchased within the
8
126 ALL ABOUT UCONNECT ACCESS
NOTE: Voice Texting through Uconnect Access is available
for Android phones only. iPhone texting is supported with
Siri and does not require a Uconnect Access subscription.
Before you drive, familiarize yourself with the easy-to-use
Uconnect System.
3. The Uconnect Voice Command And Uconnect Phone
Buttons On Your Steering Wheel
The buttons let you use your voice to give commands,
make phone calls, send and receive text messages
hands-free, enter navigation destinations and control
your radio and media devices.
1. The ASSIST And 9-1-1 Buttons On Your Rearview
Mirror
The ASSIST Button is used for contacting Roadside
Assistance, Vehicle Care and Uconnect Care. The 9-1-1
button connects you directly to emergency services.
2. The Uconnect “Apps” Button On The Menu Bar Of
The In-Vehicle Touchscreen
This is where you can begin registration for Uconnect
Access, find the Apps and purchase 3G Wi-Fi Hotspot
on demand.
1 — Phone Pick up Button
2 — Voice Recognition Button
3 — Phone Hang Up Button
ALL ABOUT UCONNECT ACCESS 127
1 — Uconnect Phone Button
2 — Uconnect Voice Command Button
3 — Phone Hang Up Button
4 — Steering Wheel Audio Controls (Left Rear Surface of Steering
Wheel)
5 — Steering Wheel Audio Controls (Right Rear Surface of Steering
Wheel)
6 — Volume/Mute Button
NOTE: Interior trims may vary.
7 — Uconnect 3C NAV Radio
8 — Back Button
9 — Tune or Scroll Knob/Browse or Enter Button
10 — Power Outlet
11 — Media Hub — USB port, SD Card and Audio Jack (Inside
Center Console)
12 — 9-1-1 Button
13 — ASSIST Button
8
128 ALL ABOUT UCONNECT ACCESS
Included Trial Period For New Vehicles
Your new vehicle may come with an included trial period
for use of the Uconnect Access Services starting at the date
of vehicle purchase. To activate the trial, you must first
register with Uconnect Access. Once registered, Uconnect
Access customers can purchase additional services and
Apps over the lifetime of their vehicle ownership.
There are a few quick ways for you to identify your radio.
For a more complete description, please refer to the User
Guide in your glove box or visit DriveUconnect.com (U.S.
Residents) or DriveUconnect.ca (Canadian Residents).
• Both the Uconnect 3C and Uconnect 3C NAV feature a
large 8.4 inch full color touchscreen.
• Only the Uconnect 3C NAV will have the HD Radio icon
when listening to FM or AM stations. The icon will be lit
when it is receiving an HD Radio signal (not all stations
currently broadcast an HD Radio signal).
ALL ABOUT UCONNECT ACCESS 129
Features And Packages
After the trial period, you can subscribe to continue your
service by visiting the Uconnect Store located within the
Mopar
Owner
Connect
website
(moparownerconnect.com). If you need assistance, you
can also call Uconnect Care at:
1-855-792-4241
For the latest information on packages and pricing information, visit DriveUconnect.com (U.S. Residents) or
DriveUconnect.ca (Canadian Residents).
GETTING STARTED WITH UCONNECT ACCESS
2. Press the “Uconnect Care” button on the touchscreen.
Registration
3. A helpful Uconnect Care Agent will register your vehicle and handle all of the details.
To unlock the full potential of Uconnect Access in your
vehicle, you first need to register with Uconnect Access.
1. Push the ASSIST button on your rearview mirror.
Signing up is easy! Simply follow the steps above. Or,
press the “Apps
” button on the touchscreen to
“Register By Web” to complete the process using your
wireless device or computer.
For further information please visit DriveUconnect.com
(U.S. Residents) or DriveUconnect.ca (Canadian Residents).
8
130 ALL ABOUT UCONNECT ACCESS
Download The Uconnect Access App
You’re only a few steps away from using remote commands and sending destinations from your phone to your
vehicle.
• Once on the “Remote” screen, you can begin using
Remote Door Lock/Unlock, Remote Vehicle Start, and
activate your horn and lights remotely, if equipped.
• Press the “Location” button on the bottom menu bar of
the app to bring up a map to locate your vehicle or send
a location to your Uconnect Navigation using Vehicle
Finder and Send ‘N Go, if equipped.
• Press the “Settings” side menu in the upper left corner of
the app to bring up app settings
Purchasing Apps And 3G Wi-Fi Hotspot For Your
Vehicle
Mobile App
To use the Uconnect Access Mobile App:
• Once you have registered your Uconnect Access services, download the Uconnect Access app to your mobile device. Use your Owner Account login and password to open the app.
Apps and 3G Wi-Fi Hotspot can be purchased from the
Uconnect Store from within your vehicle, and online at the
Mopar
Owner
Connect
website
moparownerconnect.com. You must first register and set
up a Uconnect Payment account.
Using Mopar Owner Connect
The
Mopar
Owner
Connect
website
moparownerconnect.com provides you with all the information you need, all in one place. You can track your
service history, find recommended accessories for your
vehicle, watch videos about your vehicle’s features, and
easily access your user guides and manuals. It is also where
ALL ABOUT UCONNECT ACCESS 131
you can manage your Uconnect Access account. This
section will familiarize you with the key elements of the
website that will help you get the most of your Uconnect
Access system.
• Your Vehicle(s):
Images are placed here to represent the FCA US LLC
vehicles (Chrysler, Jeep, Dodge, Ram and FIAT) you
own. If a vehicle you own is not shown here, click on the
“Add New Vehicle” button. Likewise, if a vehicle is
shown that you no longer own click on the “Edit Profile”
to manage your account.
• Edit Profile:
To manage the details of your Uconnect Access account,
such as your contact information, password and PIN,
click on the “Edit Profile” button to access the details of
your account.
• Shop:
To purchase a 3G Wi-Fi Hotspot and renew your subscription to a package, click on the “Shop” tab, then go
to the Uconnect Store to make your purchase.
• Connected Vehicle:
This statement will indicate which vehicle’s you own
that are equipped with the Uconnect Access system.
Other vehicles you own may not have Uconnect Access
and will indicate that it is a non-Uconnect Access
Vehicle.
• Remote Services:
For vehicles with an active Uconnect Access subscription, press one of these icons and enter your four-digit
Uconnect Security PIN to command your vehicle to
remotely start, lock/unlock doors or sound the horn and
lights.
• Subscription Status:
Refer to this section to quickly see if you are currently
subscribed to remote services.
• Uconnect App:
This is where you can enter the mobile phone number
for your compatible device to download the Uconnect
App. Device compatibility can be verified at
UconnectPhone.com. For more details, see the section
labeled Download the Uconnect App.
8
132 ALL ABOUT UCONNECT ACCESS
• Learn & Use:
Click on the “Learn & Use” tab to find user guides and
other information about your vehicle. More specifically,
there is a dedicated Uconnect Access tab in this section
to learn all about your connected vehicle capabilities.
Editing Your Notifications
Notifications are an important element of your Uconnect
Access Account. For example, any time you use your
remote services (such as Remote Door Unlock), or if your
security alarm is set off, you can elect to receive a text
message and/or E-mail to notify you of the event. To set up
the notifications, please follow these instructions.
5. You can enter up to five mobile phone and/or email
addresses to your notifications, and you can customize
which ones receive the types of messages.
6. If you add a mobile phone number, you will receive a
confirmation text message asking to confirm and receive
vehicle notifications. If you are OK with this, reply to the
text message saying “yes” (message and data rates may
apply, please see your mobile phone provider for details). If you have questions, text “HELP” in your reply.
USING UCONNECT ACCESS
Getting Started With Apps
2. Click the “Edit Profile” button in the upper-right corner
of the page.
Applications (Apps for short) in your Uconnect Access
system are designed to deliver the features and services
that you want. The types of apps you can use with
Uconnect Access are:
3. Click the Uconnect Notifications tab on the left side of
the page.
• Built-In Apps — uses the 1X (voice/data) or 3G (data)
network on your Uconnect 3C or 3C NAV radio.
4. If you have more than one vehicle with Uconnect
Access, please select which vehicle you want to manage
notifications for using the drop down menu.
Apps Main Menu
1. Log on to moparownerconnect.com
” button on the touchscreen to open
Press the “Apps
the Apps main menu, in this screen you will be able to
access all of your available Apps. To access an App
ALL ABOUT UCONNECT ACCESS 133
directly, press the corresponding button on the touchscreen and you will be directed to that App. To view the
rest our your Apps, press the page forward or page back
button.
App Manager
Press the “App Manager” button to access the following
categories:
• Favorite Apps — this is a good place to put the Apps
you use most frequently.
9-1-1 Call
WARNING!
Some Uconnect Access services, including 9-1-1 and
assist will NOT work without an operable 1X (voice/
data) or 3G (data) network connection.
Access To Emergency Services At The Push Of A Button
• All Apps — all of your available Apps will reside in the
“All Apps” folder.
• Running Apps — press this tab to see which Apps are
currently running.
NOTE: Most Uconnect Access features do not require that
you have a compatible device. The Uconnect Access features must have an operable 1X (voice/data) or 3G (data)
network connection and you must be registered with
Uconnect Access with an active subscription. Only Voice
Texting and the Uconnect App require a compatible device
to work with your Uconnect Access system.
8
134 ALL ABOUT UCONNECT ACCESS
Uconnect Access In-Vehicle Assistance Features
With Uconnect Access, your vehicle has on-board assistance features located on the rear view mirror designed to
enhance your driving experience if you should ever need
assistance or support.
Description
9-1-1 Call is a feature that, at the push of a button, can
contact emergency services. It’s a convenient way to get in
contact with a 9-1-1 operator in the event of an emergency.
When the connection between the vehicle and a 9-1-1
operator is made, your vehicle will automatically transmit
location information to the 9-1-1 operator.
How It Works
1. Push the “9-1-1” Call button on the Rearview Mirror; the
indicator light will turn green indicating a call has been
placed.
NOTE:
• In case the “9-1-1” Call button is accidentally pushed,
there is a 10 second delay before the 9-1-1 call is
placed. The system will verbally alert you that a call is
about to be made. To cancel the 9-1-1 Call connection,
push the “9-1-1” Call button on the Rearview Mirror or
press the “Cancellation” button on the Phone Screen.
• During a 911 call the Bluetooth paired phone is disconnected so incoming or outgoing calls will go
through mobile versus the handsfree system which is
not available due to the 911 call.
2. Once a connection between the vehicle and a 9-1-1
operator is made, the 9-1-1 Call system will transmit the
following important vehicle information to a 9-1-1 operator:
• Indication that the occupant placed a 9-1-1 Call.
• The vehicle brand.
• The last known GPS coordinates of the vehicle.
3. You should be able to speak with the 9-1-1 operator
through the vehicle audio system to determine if additional help is needed.
If a connection is made between a 9-1-1 operator and your
vehicle, you understand and agree that 9-1-1 operators
may, like any other 9-1-1 call, record conversations and
sounds in and near your vehicle upon connection.
ALL ABOUT UCONNECT ACCESS 135
9-1-1 Call System Limitations
• The vehicle’s electrical systems are not intact.
Vehicles sold in Canada and Mexico DO NOT have 9-1-1
Call system capabilities. 9-1-1 or other emergency line
operators in Canada and Mexico may not answer or
respond to 9-1-1 system calls.
• The 9-1-1 Call system software and/or hardware is
damaged during a vehicle crash.
If the 9-1-1 Call system detects a malfunction, any of the
following may occur at the time the malfunction is detected:
• The Rearview Mirror light will continuously be illuminated red.
• The vehicle battery loses power or becomes disconnected during a vehicle crash.
• 1X (voice/data) or 3G (data) network and/or Global
Positioning Satellite signals are unavailable or
obstructed.
• Equipment malfunction at the 9-1-1 operator facility.
• The screen will display the following message “Vehicle
phone requires service. Please contact your dealer.”
• Operator error by the 9-1-1 operator.
• An In-Vehicle Audio message will state “Vehicle phone
requires service. Please contact your dealer.”
• Weather.
Even if the 9-1-1 Call system is fully functional, factors
beyond FCA US LLC’s control may prevent or stop 9-1-1
Call system operation. These include, but are not limited
to, the following factors:
• The ignition key has been removed from the ignition
and the delayed accessories mode is active.
• The ignition key is in OFF position.
• 1X (voice/data) or 3G (data) network congestion.
• Buildings, structures, geographic terrain, or tunnels.
NOTE: The signal strength bars on the “Apps ” button on
the touchscreen will show a single bar and a prohibition
to indicate your vehicle is not connected to an
symbol
operable 1X (voice/data) or 3G (data) network.
8
136 ALL ABOUT UCONNECT ACCESS
If your vehicle loses battery power for any reason (including during or after an accident) the 9-1-1 Call System,
among other vehicle systems, will not operate.
• Vehicle must have an operable 1X (voice/data) or 3G
(data) network connection.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
WARNING!
• Never place anything on or near the vehicle’s 1X
(voice/data) or 3G (data) and GPS antennas. You
could prevent 1X (voice/data) or 3G (data) and GPS
signal reception, which can prevent your vehicle
from placing an emergency call. An operable 1X
(voice/data) or 3G (data) network connection and a
GPS signal is required for the 9-1-1 Call system to
function properly.
(Continued)
Requirements
• This feature is available only on vehicles sold in the U.S.
• Vehicle must be properly equipped with the Uconnect
Access System.
ALL ABOUT UCONNECT ACCESS 137
WARNING! (Continued)
WARNING! (Continued)
• Do not add any aftermarket electrical equipment to
the vehicle’s electrical system. This may prevent your
vehicle from sending a signal to initiate an emergency call. To avoid interference that can cause the
9-1-1 Call system to fail, never add aftermarket
equipment (e.g., two-way mobile radio, CB radio,
data recorder, etc.) to your vehicle’s electrical system
or modify the antennas on your vehicle. IF YOUR
VEHICLE LOSES POWER FOR ANY REASON (INCLUDING DURING OR AFTER AN ACCIDENT)
THE UCONNECT FEATURES, APPS AND SERVICES AMONG OTHERS WILL NOT OPERATE.
• The Occupant Restraint Controller (ORC) turns on
the Air Bag Warning Light on the instrument panel if
a malfunction in any part of the air bag system is
detected. If the Air Bag Warning Light is illuminated,
the air bag system may not be working properly and
the 9-1-1 system may not be able to send a signal to
a 9-1-1 operator. If the Air Bag Warning Light is
illuminated, have an authorized dealer service your
vehicle immediately.
• Ignoring the Rearview Mirror light could mean you
will not have 9-1-1 Call services if needed. If the
Rearview Mirror light is illuminated, have an authorized dealer service the 9-1-1 Call system immediately.
• If anyone in the vehicle could be in danger (e.g., fire
or smoke is visible, dangerous road conditions or
location), do not wait for voice contact from a 9-1-1
operator. All occupants should exit the vehicle immediately and move to a safe location.
• Failure to perform scheduled maintenance and regularly inspect your vehicle may result in vehicle
damage, accident or injury.
(Continued)
8
138 ALL ABOUT UCONNECT ACCESS
FAQs
Roadside Assistance Call
1. What Happens If I Accidentally Push The 9-1-1 Button
On The Mirror? You have 10 seconds after pushing the
9-1-1 button to cancel the call. To cancel the call, either
push the “9-1-1” button again, or press the “cancel”
button on the in-vehicle touchscreen.
Easy Call To Roadside Assistance 24/7 Using ASSIST
Button
2. What Type Of Information Is Sent When I Call 9-1-1
From My Vehicle? Certain vehicle information, such as
make and model, is transmitted along with last known
GPS location. Also note that 9-1-1 operators may record
conversations and sounds within your vehicle once a
connection is made, and that by using the service you
consent to having this information shared.
3. When Could I Use The 9-1-1 Button? You can use the
9-1-1 button to make a call if you or someone else needs
emergency assistance.
Uconnect Access In-Vehicle Assistance Features
With Uconnect Access, your vehicle has on-board assistance features located on the rear view mirror designed to
enhance your driving experience if you should ever need
assistance or support.
ALL ABOUT UCONNECT ACCESS 139
Description
Vehicles equipped with the Uconnect Access system feature will contain an ASSIST button on the rear view mirror.
Once the vehicle has been registered and is subscribed to
the Advantage Package, the ASSIST button can connect
you directly to one of three important care centers for
support.
• Roadside Assistance — If you get a flat tire, or need a
tow, you’ll be connected to someone who can help
anytime. Additional fees may apply. (See the Disclaimers section below for more detail).
• Uconnect Care — In vehicle support for Uconnect
Access System, Apps, and Features.
8
• Vehicle Care — Total support for your vehicle.
How It Works
You or someone in the vehicle simply presses the ASSIST
button located on the rear view mirror and you will be
presented with your ASSIST options. Make your selection
by pressing the touchscreen.
NOTE: The signal strength bars on the “Apps ” button on
the touchscreen will show a single bar and a prohibition
to indicate your vehicle is not connected to an
symbol
operable 1X (voice/data) or 3G (data) network.
Requirements
• This feature is available only on vehicles sold in the U.S.
• Vehicle must be properly equipped with the Uconnect
Access System.
140 ALL ABOUT UCONNECT ACCESS
• Vehicle must have an operable 1X (voice/data) or 3G
(data) network connection.
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
Disclaimers
If Roadside Assistance is provided to your vehicle, you
agree to be responsible for any additional roadside assistance service costs that you may incur. In order to provide
Uconnect Services to you, we may record and monitor your
conversations with Roadside Assistance, Uconnect Care or
Vehicle Care, whether such conversations are initiated
through the Uconnect Services in your vehicle, or via a
landline or mobile device, and may share information
obtained through such recording and monitoring in accordance with regulatory requirements. You acknowledge,
agree and consent to any recording, monitoring or sharing
of information obtained through any such call recordings.
FAQs
1. What Is The Phone Number For Roadside Assistance?
The phone number is:
US:800-521-2779
Canada: 800-363-4869
NOTE: Some Apps are suspended while an Assist call is
active.
2. If I Am Subscribed To Uconnect Access, Does It Cover
Towing Or Other Expenses Incurred By Using FCA
Roadside Assistance? No, however your new vehicle
may include Roadside Assistance services.
Yelp
Looking for a burrito joint that is open? A boutique to buy
a new pair of jeans? Yelp is here to help. Use Yelp to search
for places to eat, shop, relax and play.
Description
Yelp is a familiar, widely used website and mobile App that
connects people to great local businesses. Now with
Uconnect Access, Yelp has been adapted for your vehicle,
and on the go capability. Yelp gives you the ability to search
for a Point of Interest (POI) or desired destination using
ALL ABOUT UCONNECT ACCESS 141
either pre-defined search categories, or custom searches,
using keywords like “tacos.” Searching can be done by
voice recognition or by using the touchscreen keypad.
How It Works
1. Using the touchscreen, launch Yelp by pressing Apps
> Yelp.
Here is what Yelp can do for you while you are on the road:
OR
• Deliver a list of up to 20 results, prioritizing by best
match, by distance or rating.
Using voice recognition, push the
“Launch Yelp.”
button and say
• Provide up-to-date search listings (pulling the latest
information from the cloud).
• The live and local search engine will scan 12 categories
and millions of POIs to provide drivers with a local
guide for real word-of-mouth recommendations.
• With one press, select from the list to find location
address, phone number, user ratings, hours of operation
(if available) and price ratings (if available).
• The ability to call the selected POI directly (a device
must be paired via Bluetooth), or have the address
immediately sent to the navigation system for routing (if
equipped).
8
Give It A Try!
button on the steering wheel and say
1. Push the
“Launch Yelp.”
2. Push the
button on the steering wheel and say
“Yelp Search.”
142 ALL ABOUT UCONNECT ACCESS
3. Uconnect will prompt you to say something like, “car
wash.” After the beep, say “restaurants.”
4. The Uconnect system will link out to the cloud to do
your Yelp search, and depending on your search request, this may take up to 30 seconds.
5. Using the touchscreen, select a restaurant from the list of
search results.
6. Navigate to the location by pressing “Go Now” (if
equipped with navigation).
NOTE: Save your destination to Favorites. To find it again
go to Nav > Where to > Favorites.
How To Add And Delete Search Categories
Yelp provides the ability to save custom search categories
. To
by first initiating the search, then pressing the star
.
delete a search category, select it, and press the star
A confirmation prompt will appear to confirm. Create
up to 36 custom search categories!
Requirements
• Vehicle must be properly equipped with the Uconnect
Access System.
• Your vehicle must be in range of an operable 1X (voice/
data) or 3G (data) network connection (indicated by the
” button on the
signal strength bars on the “Apps
touchscreen).
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
• Vehicle must have onboard navigation to use Go Now.
• Mobile device must be paired with Bluetooth and connected to call a POI directly.
ALL ABOUT UCONNECT ACCESS 143
• Sort results by Best Match, Rating or Distance (default is
Best Match).
Safety Information
WARNING!
• ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume
all risks related to the use of the Uconnect features
and applications in this vehicle. Only use Uconnect
when it is safe to do so. Failure to do so may result in
an accident involving serious injury or death.
Tips And Shortcuts
• To improve your search results, use single search terms
like “coffee” rather than multiple words, which may
deliver mixed results, for example, “home improvement
and gardening stores.”
• Press the “microphone” on the touchscreen to use voice
commands.
• If you wish to cancel a search request, press “Cancel.”
• To learn more about a listing, press the line that appears
on the display details such as the address, phone number and hours of operation (if applicable).
• The Rating tab will re-sort your search based on ratings
submitted by everyday users to Yelp’s online database.
• Distance will sort by the closest POI near you.
button a second
• To bypass the voice prompts hit the
time to barge in and state your desired command.
• To exit Yelp, press the “X” (close) button in the upper
right corner of the touchscreen.
Security Alarm Notification
Notifies you via email or text message (SMS) when the
vehicle’s factory-installed theft alarm system has been
set-off.
Description
The Theft Alarm Notification feature notifies you via email
or text message (SMS) when the vehicle’s factory-installed
theft alarm system has been set-off. You’ve probably seen
this before, a vehicle’s alarm goes off in a parking lot or out
on the street, and the owner is nowhere to be found. With
Theft Alarm Notification your vehicle will alert you of the
situation.
8
144 ALL ABOUT UCONNECT ACCESS
Should you receive a notification that your theft alarm has
been set-off, please react with caution. There are a number
of reasons why your alarm may have been triggered, one of
which could be that your vehicle was stolen. If so, please
see the details of the Stolen Vehicle Assistance service
below.
How It Works
Theft Alarm Notification can send you an email or text
message (SMS) should the alarm go off. The following
instructions will help you manage your notifications.
1. Log on to the Mopar Owner Connect website
(moparownerconnect.com) using the username and
password you used when registering your Uconnect
Access system.
• If you forgot your username or password, links are
provided on the website to help you retrieve them.
4. If you have more than one vehicle with Uconnect
Access, please select which vehicle you want to manage
notifications for using the drop down menu.
5. You can enter up to five mobile phone and/or email
addresses to your notifications, and you can customize
which ones receive the types of messages.
6. You will receive a confirmation text message, asking to
confirm and receive vehicle notifications. If you are ok
with this, reply to the text message saying “yes” (message and data rates may apply, please see your mobile
device provider for details). If you have questions, text
“HELP” in your reply.
7. You’re all set. Should your theft alarm go off, a notification(s) will be sent to the number(s) and/or email(s)
you provided.
Requirements
2. Once logged in you will find yourself on the Dashboard.
Click on the “Edit Profile” button in the upper-right
corner of the page.
• Vehicle must be properly equipped with the Uconnect
Access System and a factory installed Theft Alarm
system.
3. Click on the “Notifications” tab on the left side of the
page.
• Your vehicle must have an operable 1X (voice/data) or
3G (data) network connection.
ALL ABOUT UCONNECT ACCESS 145
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
• Owner must properly set-up notification to have the
Theft Alarm Notification sent to an appropriate mobile
device or email account.
CAUTION!
In the event your theft alarm is activated, use
caution and evaluate the situation from a safe distance. If any unauthorized or suspicious person is
near or inside of your vehicle, immediately contact
the police. Do not do anything that could jeopardize
your safety or the safety of those around you.
FAQs
1. What do I do if my Theft Alarm goes off? In the event
your theft alarm is activated, use caution and evaluate
the situation from a safe distance. If any unauthorized or
suspicious person is near or inside of your vehicle,
immediately contact the police. Do not do anything that
could jeopardize your safety or the safety of those
around you.
2. How can I change where I receive notifications? You
can manage your notifications by going to the Mopar
Owner Connect website (moparownerconnect.com)
and log in with your username and password. Once
there, you can click on “Edit Profile”, then the “Notifications” tab.
3. Can I receive a text message (SMS) when my Theft
Alarm goes off? Yes. Text messages are a convenient
and quick way to receive notifications. You can manage
your notifications by going to the Mopar Owner Connect website (moparownerconnect.com) and log in
with your username and password. Once there, you can
click on “Edit Profile”, then the “Notifications” tab to
add, remove and edit your notification options.
Stolen Vehicle Assistance
If your vehicle is ever stolen, this App (with your permission) can provide its location to the law enforcement to
help them track it down.
Description
If your vehicle is stolen, contact local law enforcement
immediately to file a stolen vehicle report. Once this report
has been filed with law enforcement and you have also
notified Uconnect Care that you have filed the report,
8
146 ALL ABOUT UCONNECT ACCESS
Uconnect Care can help locate your vehicle. The Uconnect
Care Agent will ask for the stolen vehicle report number
issued by local law enforcement. As long as your vehicle
has an operable 1X (voice/data) or 3G (data) network
connection, the Uconnect Care Agent may be able to locate
the stolen vehicle and work with law enforcement to help
recover it. The Vehicle must have an operable 1X (voice/
data) or 3G (data) network connection and must be registered with Uconnect Access with an active subscription
that includes the applicable feature (Vehicle must be within
the United States, have network coverage and must be
registered with Uconnect Access with an active subscription that includes the applicable feature).
Stolen Vehicle Assistance is a secure process that can only
be done with your permission. Law enforcement gets
involved only after you file a stolen vehicle report with
them.
How It Works
1. If your vehicle is stolen, contact local law enforcement as
soon as possible. They will work with you to file a stolen
vehicle report.
2. Next, inform Uconnect Care that your vehicle has been
stolen. Uconnect Care can be reached by calling:
1-855-792-4241
The Uconnect Care Agent will ask for the stolen vehicle
report number (as issued by your local law enforcement). If you have downloaded the Uconnect Access
App, you can push the “Operator” button on your
device and select “Uconnect Care” to make the call.
3. Uconnect Care will authenticate that you are the owner
of the vehicle and contact the law enforcement with
whom you filed the stolen vehicle report.
4. Uconnect Care will work with your local law enforcement to track and attempt to recover the vehicle. You
will be contacted by law enforcement if your vehicle is
recovered. While the investigation is ongoing, you
should also contact your insurance company to inform it
of the situation.
ALL ABOUT UCONNECT ACCESS 147
Requirements
• Vehicle must be properly equipped with the Uconnect
Access System.
• Vehicle must have an operable 1X (voice/data) or 3G
(data) network connection.
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
Disclaimers
• No security system is invincible, and vehicle thieves
may develop ways to prevent your vehicle from being
located.
FAQs
1. What to do if my vehicle is stolen? First, call local law
enforcement as soon as possible. They will work with
you to file a stolen vehicle report. Then call Uconnect
Care at:
1-855-792-4241
and inform Uconnect Care that your vehicle has been
stolen and that you have filed a stolen vehicle report
with law enforcement. Uconnect Care will help you
through the process.
2. Can someone track my vehicle? To ensure your privacy,
and the privacy of others using your vehicle, you must
involve local law enforcement to have Uconnect locate
your vehicle. This helps to ensure that someone is not
tracking your vehicle for purposes other than at your
request to locate it in the event it is stolen.
3. How will I know if my vehicle is recovered? After you
provide the Uconnect Care Agent with the stolen vehicle
report, the agent will work together with law enforcement to try to locate your vehicle. If your vehicle is
recovered, you will be contacted by law enforcement.
4. Can Uconnect Access lower my insurance rates? Some
insurance providers offer lower rates on vehicles
equipped with systems that can deter auto theft. When
shopping for insurance, be sure to inform your insurance provider of your Uconnect Access system (Stolen
Vehicle Assistance requires a subscription), to find out if
your insurance provider offers a lower rate if your
vehicle is equipped with Uconnect access and you have
an active subscription.
Vehicle Finder
Forget where you parked your car? We’ll help you locate it!
Simply use the Uconnect App on your smartphone and
you’ll be on track.
8
148 ALL ABOUT UCONNECT ACCESS
Description
The Vehicle Finder feature of the Uconnect Mobile App
allows you to find the location of your vehicle when you
have lost it. You can also sound the alarm and flash the
lights to make finding your vehicle even easier.
How It Works
Use the Uconnect App to find the location of your vehicle.
tab at the bottom of the App,
1. Select the “Location”
you can choose how you want the information displayed.
2. Choose how you want to view the information by
pressing the “View” icon on the “Location” tab. Three
options will appear:
• Map
• Satellite
• Hybrid
3. Select the “Vehicle” icon to determine the location of
your vehicle, or select the “Person” icon to see your
location.
4. Using the two icons you can locate your vehicle based
on your position, and when the “Vehicle” icon is selected two options will appear, allowing you to sound
the vehicle’s alarm, or map a route to your vehicle.
NOTE:
• In order to sound your vehicle’s alarm you will need to
enter your Uconnect Access PIN.
• In order to map a route to your vehicle’s location, you
will need to select a Navigation App on your mobile
device, when prompted, to launch the route in.
Requirements
• Vehicle must be properly equipped with the Uconnect
Access System.
• Vehicle must have an operable 1X (voice/data) or 3G
(data) network connection.
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
ALL ABOUT UCONNECT ACCESS 149
FAQs
Description
1. Can someone track my vehicle? To ensure your privacy,
and the privacy of others using your vehicle, you must
involve local law enforcement to have Uconnect locate
your vehicle. This helps to ensure that someone is not
tracking your vehicle for purposes other than at your
request to locate it in the event it is stolen.
The Send ‘N Go feature of the Uconnect Mobile App allows
you to search for a destination on your mobile device and
then send the route to your vehicle’s native navigation
system.
2. How long does it take to sound my horn and flash the
lights? Depending on various conditions, it can take
three minutes or more for the request to get through to
your vehicle, although Uconnect Access is always striving to improve performance.
3. How do I turn off the horn and lights after I turn them
on? By pressing the “horn icon” a second time on your
Uconnect App, a second command will be sent to
shutoff the horn and lights. Alternatively, if you are
close enough to the vehicle you can use the Key Fob to
turn off the horn and lights by pressing the red “Panic”
button.
Send ‘N Go
Use the mobile app to easily search and send your locations directly to your vehicle navigation system. Its easy to
enter and great for quick access on the go.
How It Works
1. Use the Uconnect App to find the destination.
There are two ways to find a destination. After selecting
the “Location”
tab at the bottom of the App, either
browse through one of the categories provided, or
type the name or keyword in the search box at the top
of the App.
2. Select your destination from the list that appears. Location inforation will then be displayed on the map.
From this screen, you will be able to:
• View the location on a map
• See the distance from your current location
• Send the address
3. Send the destination to the Uconnect Navigation in your
vehicle. You can also call the destination, by pressing the
“Call” button.
8
150 ALL ABOUT UCONNECT ACCESS
4. Confirm your destination inside your vehicle by pressing the “Go Now” option on the pop-up that appears on
the radio touchscreen.
Requirements
• Vehicle must be properly equipped with the Uconnect
Access System.
• Vehicle must have an operable 1X (voice/data) or 3G
(data) network connection.
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
FAQs
1. How long does it take to send the route and destination to my vehicle? Depending on various conditions, it
can take three minutes or more for the request to get
through to your vehicle, although Uconnect, and
SiriusXM are always striving to improve performance.
2. Can I cancel a route I sent to my vehicle? Yes, once you
enter your vehicle, and start the engine, the pop-up
message stating that you have a new route will appear.
There is an exit button on the pop-up that will cancel to
route if selected.
3. Can I select a different route than the most recent one
I sent to my vehicle? Yes, once you enter the vehicle,
and start the engine, the pop-message has a “Locations”
option. Once “Locations” is selected you can choose
from a list of recently sent destinations.
3G Wi-Fi Hotspot
Create A 3G Wi-Fi Hotspot For Use In
Your Vehicle
Description
3G Wi-Fi Hotspot is an in-vehicle feature
that connects your device to an operable
1X (voice/data) or 3G (data) network
using Uconnect Access and is ready to go where ever you
are. Once your vehicle is registered for Uconnect Access,
you can purchase a 3G Wi-Fi Hotspot subscription at the
Uconnect Store. After you’ve made your purchase, turn on
your signal and connect your devices.
ALL ABOUT UCONNECT ACCESS 151
WARNING!
The driver should NEVER use the 3G Wi-Fi Hotspot
while driving the vehicle. Failure to do so may
result in an accident involving serious injury or
death.
• Enables all your passengers to be simultaneously connected to the web.
• Connect several devices at one time.
• Any Wi-Fi-enabled device — such as a laptop or any
other portable enabled media can connect over your
private in-vehicle network.
• A high-speed, secured connection lets anyone on your
private network access the Web — great for working and
relaxing.
How It Works
The 3G Wi-Fi Hotspot feature provides the vehicle passengers with an internet access hot spot in the vehicle, using
the radio as an access point. The hot spot will allow Wi-Fi
enabled in-vehicle devices (such as a laptop or any other
portable enabled media device) to wirelessly connect to the
internet.
Give it a Try!
1. Purchase a subscription to the 3G Wi-Fi Hotspot feature
for a day, a week, or a month. You can buy the 3G Wi-Fi
Hotspot in one of two ways:
>
• From your in-vehicle touchscreen (Apps
Uconnect Store).
• From the Mopar Owner Connect website
(moparownerconnect.com) > Shop > Uconnect Store.
NOTE: You must set up your Uconnect Payment Account
on the Mopar Owner Connect website and establish a
Uconnect Payment PIN to purchase 3G Wi-Fi Hotspot.
2. After purchasing 3G Wi-Fi Hotspot, it will be enabled/
turned on in your vehicle. The 3G Wi-Fi Hotspot App
can be found on your in-vehicle touchscreen by select> 3G Wi-Fi Hotspot.
ing Apps
8
152 ALL ABOUT UCONNECT ACCESS
3. 3G Wi-Fi Hotspot should be turned on after purchasing
a subscription. To disable 3G Wi-Fi Hotspot, simply
press to uncheck the box to the right of the App (this
feature is available while the vehicle is in motion).
Optional: Give your hot spot a unique name by pressing
Hotspot Name (key pad is not available while vehicle is
in motion).
4. From your in-vehicle touchscreen, select the appropriate
in-vehicle network and the desired security level setting.
Each security level has different pass phrase constraints.
Change the security level setting by selecting the checkbox for any of the following security settings.
• WPA2/WPA — “WiFi Protected Access” – This is the
default security and can be changed by pressing 3G
Wi-Fi Hotspot > View/Edit Pass phrase.
ALL ABOUT UCONNECT ACCESS 153
• WEP — “Wired Equivalent Privacy” – Pass phrase
must be 13 characters long.
• None — No security, will not prompt you for a pass
phrase, when you attempt to connect to 3G Wi-Fi
Hotspot.
5. From your Wi-Fi enabled device (laptop, tablet, etc.).
• Search for and select the Uconnect hotspot in the
settings of your device.
• Type the network security key (this is called “pass
> 3G Wi-Fi Hotspot
phrase” and is found in Apps.
> View/Edit Pass phrase).
• Click OK.
You are now connected!
WARNING!
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
related to the use of the Uconnect features and applications in this vehicle. Only use Uconnect when it is
safe to do so. Failure to do so may result in an accident
involving serious injury or death.
Voice Texting
Add Free-Form Voice Texts To Your Voice Text Reply
Feature
Description
This Voice Texting enhances the Voice Text Reply feature
built into your Uconnect 3C and 3C NAV radio. While
Voice Text Reply provides 18 pre-defined messages you can
send, Voice Texting lets you create and send nearly any
message you want. Just speak your message as if you were
talking to the recipient, and the Uconnect Access voicetexting technology will convert your voice into a text
message.
Voice Texting and Voice Text Reply features are compatible
with many newer Android and Blackberry devices. Before
using, determine if your device has been tested to support
Bluetooth “Message Access Profile (MAP)” at
UconnectPhone.com. iPhone and some other devices do
not currently support Bluetooth MAP. Ensure MAP is ON
and incoming message notification is enabled.
8
154 ALL ABOUT UCONNECT ACCESS
How It Works
Set Up Your Device To Work With Voice Texting
After pairing your device to the vehicle using Bluetooth see
(UconnectPhone.com), push the “phone” button on the
menu bar of the radio to see the main Phone screen. A
minute or so after a compatible MAP enabled device has
been Bluetooth connected to the vehicle; the “messaging”
button on the touchscreen will change from gray to white.
This is an indicator that Voice Texting will work with your
device. Outgoing voice texts may not be possible. The
device may allow incoming texts only.
Determine if your device has been tested to support
Bluetooth “Message Access Profile” (MAP) - at
UconnectPhone.com. (Your device may support Voice
Texting even if not found on this website. Check with your
device manufacturer to see if it supports MAP protocol.)
NOTE: If your device supports MAP, then ensure MAP is
on and incoming message notification is enabled, (see
UconnectPhone.com for device specific instructions).
Follow the steps below to see if your device can set up to
work with Voice Texting.
If a Bluetooth authorization window appears showing
your device requesting permissions, check the box for
Always and press Accept.
ALL ABOUT UCONNECT ACCESS 155
Sending A New Text Message From Radio
1. Push
on the steering wheel.
Viewing Your Messages
1. Push the “Phone” button on the steering wheel.
2. Say “Send text message.”
3. The system will respond “Say the phone number or the
full name and the phone type of the contact that you
want to send a message to.”
4. Dictate message (“I will be home at eight.”)
5. When finished dictating, wait for prompt and say
“Send.”
Viewing Or Listening To Incoming Messages
To Listen to a Message from Radio
1. Push the ⬙Phone⬙ button on the steering wheel. Say
ⴖListen to message.ⴖ
OR
Press the ⬙Listen⬙ button on the touchscreen.
8
156 ALL ABOUT UCONNECT ACCESS
2. Say “View message.”
OR
Press “View” on the in-vehicle touchscreen.
Viewing A Specific Message
1. Press “View” next to the contact name/phone number
of the message you want to be displayed.
OR
Say “Show message n.”
n = the number of the message
Listening To A Message
1. Press “Listen” on the touchscreen or push the “Phone”
button on the steering wheel and say “Listen,” the
Uconnect system will read the received text message
over the vehicle audio system.
Barge-In
Contact names or phone numbers of the message sender
appears in a list along with View and Listen buttons on
the touchscreen.
Barge-in is a feature that enables a user to say a valid
command without waiting for the system to finish speaking. When the system is “speaking” you can push the
button on the steering wheel and say a valid command.
For example, if the system is explaining all of the options
available after dictating a text message, at any time the user
can press ⬙Listen⬙ on touchscreen or push the ⬙Phone⬙
button on the steering wheel and say ⬙Listen.⬙
ALL ABOUT UCONNECT ACCESS 157
Requirements
Disclaimers
• (MAP may not be compatible with Apple iPhones (pre
iOS 6). Apple iOS 6 supports receiving text messages,
but does not support sending text messages).
• Not all Voice Texting features may be available on your
device.
• Available on vehicles sold in the United States with a
Uconnect 3C (sales code RA3) or Uconnect 3C NAV
(sales code RA4) radio equipped with Uconnect Access.
• Vehicle must be registered with an active Uconnect
Access Advantage trial or paid subscription for free
form text response to work.
• Vehicle and device must have an operable 1X (voice/
data) or 3G (data) network connection.
• Customer must have a properly paired and connected
device with Bluetooth Message Access Profile (MAP)
enabled. Voice Texting is compatible with many newer
BlackBerry and Android mobile devices. Apple iOS
5 and earlier does not support MAP so iPhones will not
send free form text messages. Apple iOS 6 supports
receiving, not sending text messages. To check if your
device has been tested to be compatible please visit
UconnectPhone.com.
• Your MAP supported device must be paired and connected to a compatible Uconnect system.
• Vehicle must have an operable 1X (voice/data) or 3G
(data) network connection to voice text.
• FCA US LLC Uconnect and its affiliates are not responsible for errant text messages.
• Vehicle must be registered with an active Uconnect
Access trial or paid subscription.
WARNING!
ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume
all risks related to the use of the Uconnect features
and applications in this vehicle. Only use Uconnect
when it is safe to do so. Failure to do so may result
in an accident involving serious injury or death.
8
158 ALL ABOUT UCONNECT ACCESS
FAQs
1. Can I still voice text if my device is not listed? We are
constantly testing devices and updating our compatibility database. If your device is not listed, you may still be
able to pair and connect your MAP supported device to
a compatible Uconnect system to see if all or most voice
texting functions work. Check your device manufacturer if MAP is supported on your device.
2. Can I use voice texting while in my other FCA vehicle?
The Voice Texting free text response feature is available
only on Uconnect 3C (sales code RA3) or Uconnect 3C
NAV (sales code RA4) radios. Other FCA vehicles do
support hands free texting, but only with fixed responses.
3. My “Messaging” button on the touchscreen is White,
but I can only use pre-formatted responses. The Voice
Texting free-form voice response requires a subscription
to the Uconnect Access Advantage package. (Some
devices will support pre-formatted responses, but not
free-form. Refer to UconnectPhone.com for further
details.)
4. Do I have to “train” my Uconnect system to my voice?
FCA uses the latest voice recognition engine that provides good recognition without required training. This
makes it easier for a passenger to also use the system.
5. Can a passenger voice text? Yes, however, voice recognition microphones are optimized for the driver, so the
system may have difficulty hearing the passenger; also,
the system will use the currently connected device, so be
sure your passenger isn’t sending texts to the wrong
recipient.
6. Does Voice Texting work with accents? Speech isn’t
perfect. Technology isn’t perfect. While FCA strives to
use the latest voice recognition engine, the technology
may have difficulty with strong accents.
7. Can I voice text my car? The Voice Texting feature
allows you to listen to, and reply to text messages (SMS)
sent to your device by voice while in your vehicle.
8. How many pre-formatted replies are there? You can
respond with a set of up to 18 preset outgoing messages
such as ⬙I’ll call you later.” Refer to “Voice Texting”
section of this supplement.
ALL ABOUT UCONNECT ACCESS 159
9. Can I use abbreviations and emoticons? Of course! Just
say the name of the most popular emoticon or abbreviation, e.g. smiley, frown, wink, & LOL.
10. Can I use Text Messaging if the “messaging” button
doesn’t turn white? Only MAP compatible devices will
work with Text Messaging. If your device is compatible, the “messaging” light will turn white, after the
device is Bluetooth connected, and you will then be
able to do hands free Text Messaging. The system will
respond with “Sorry, I didn’t understand you” if you
push the steering wheel “Phone” button and say a
voice command for Text Messaging, when the button
isn’t active (“white”).
Remote Door Lock/Unlock
Lock Or Unlock Your Vehicle From Virtually Anywhere
Using Your Computer Or Device App
Description
The Remote Door Lock/Unlock feature provides you the
ability to lock or unlock the door on your vehicle, without
the keys and from virtually any distance. You can send a
request to your vehicle in one of three ways:
• Using the Uconnect App from a compatible device
• From
the
Mopar
Owner
(moparownerconnect.com)
Connect
website
• Contacting Uconnect Care
If you want, you can set up notifications for your account
to receive an email or text (SMS) message every time a
command is sent to lock or unlock your doors.
How It Works
Uconnect App:
1. Download the Uconnect App to a compatible device and
login using your username and password.
2. To lock the doors, push the button with the closed lock
icon; to unlock the driver’s door push the button with
the open lock icon.
3. A pop-up screen will appear asking for your Uconnect
Security PIN (this is the same 4-digit code established
when your registered your Uconnect Access system).
Enter the Uconnect Security PIN on the keypad and
press “OK.”
4. The Uconnect App will confirm if your command was
sent (or not). Press “OK” to close the pop-up screen.
8
160 ALL ABOUT UCONNECT ACCESS
5. It will take a little while for the command to go through
to your vehicle. The time it takes depends on a number
of technical conditions.
6. A message will appear on the screen to let you know if
the command was received by your vehicle.
Mopar Owner Connect website:
1. Log on to the Mopar Owner Connect website
(moparownerconnect.com) using the username and
password you used when registering your Uconnect
Access system.
NOTE: If you forgot your username or password, links are
provided on the website to help you retrieve them.
2. If you have more than one vehicle registered into the
Mopar
Owner
Connect
website
(moparownerconnect.com), select the vehicle you want
to send the command by clicking on its image along the
top.
3. Beneath the image of a vehicle like yours, you will see a
row of icons. To lock the doors, click on the closed lock
icon; to unlock the driver’s door click on the “open lock
icon.”
4. You will then be asked to enter your Uconnect Security
PIN (this is the same 4-digit code established when your
registered your Uconnect Access system). Please enter
your Uconnect Security PIN.
5. A message will appear on the screen to let you know if
the command was received by your vehicle.
ALL ABOUT UCONNECT ACCESS 161
Uconnect Care:
1. If you need to unlock the doors of your vehicle, contact
Uconnect Care by calling:
855-792-4241
NOTE: The Uconnect Care agents are trained to help you
with unlocking of your door (for example, in an accidental
lock-out). All other Remote Services should be performed
via
the
Mopar
Owner
Connect
website
(moparownerconnect.com) or through the Uconnect App
on your compatible device.
2. For security purposes, the Uconnect Care agent will
verify your identity by asking for your 4-digit Uconnect
Security PIN.
3. After providing your Uconnect Security PIN, you can
ask them to lock or unlock your vehicle. The agent will
send a command to your vehicle to get the task done.
Requirements
• Vehicle must be properly equipped with the Uconnect
Access System.
• Vehicle must have an operable 1X (voice/data) or 3G
(data) network connection.
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
• If using the Uconnect App to command your vehicle,
your device must be compatible and be connected to an
operable 1X (voice/data) or 3G (data) network
connection.
• An ignition cycle is required for some remote commands
such as Remote Vehicle Start and Remote Door Lock/
Unlock if following a Remote Horn and Lights
activation.
FAQs
1. How long does it take to unlock or lock the door?
Depending on various conditions, it can take 1–2 minutes or more for the request to get through to your
vehicle, although Uconnect is always striving to improve performance.
2. Which is faster, my Key Fob or the Uconnect App?
Your Key Fob will lock/unlock the door quicker, however its range is limited and it can sometimes get
misplaced or locked in the vehicle. Your Uconnect App
comes in handy for these and other situations.
8
162 ALL ABOUT UCONNECT ACCESS
3. Will my vehicle be safe if I lose my device? People
sometimes lose their devices, which is why security
measures have been engineered into the Uconnect App.
Asking for your username, password and Uconnect
Security PIN help to ensure that nobody can get into
your vehicle if they happen to find your device.
4. Why can’t all devices use the Uconnect App? The
Uconnect App has been designed to work on most
devices with the Apple and Android operating systems.
The capabilities of these devices allows us to remotely
command your vehicle. Other operating systems may be
supported in the future.
5. Why is the Uconnect App running slow? The Uconnect
App relies on a mobile network connection from your
device to send commands to your vehicle which must
have an operable 1X (voice/data) or 3G (data) network
connection. If either your device or your vehicle are in
an area with below average coverage, it may take longer
to log in and send commands.
Remote Vehicle Start
Use Your Computer Or Wireless Device App To Start The
Engine And Warm-Up Or Cool-Down The Vehicle From
Almost Anywhere
Description
The Remote Vehicle Start feature provides you with the
ability to start the engine on your vehicle, without the keys
and from virtually any distance. Once started, the pre-set
climate controls in your vehicle can warm-up or cool-down
the interior before you have to get in. You can send a
request to your vehicle in one of two ways:
• Using the Uconnect App from a compatible device.
• From
the
Mopar
Owner
Connect
website
(moparownerconnect.com).
You can also send a command to turn-off an engine that
has been remote started. After 15 minutes if you have not
entered your vehicle with the key, the engine will shut off
automatically.
This remote function requires your vehicle to be equipped
with a factory-installed Remote Start system.
If you want, you can set-up notifications for your account
to receive an email or text (SMS) message every time a
command is sent to remote start or cancel a remote start.
ALL ABOUT UCONNECT ACCESS 163
How It Works
Mopar Owner Connect website:
Uconnect App:
1. Log on to the Mopar Owner Connect website
(moparownerconnect.com) using the username and
password you used when registering your Uconnect
Access system.
1. Download the Uconnect App to a compatible device and
login using your username and password.
2. To start the engine, press the “circular arrow”, to turnoff an engine that has been remote started press the
“cancel” button.
3. A pop-up screen will appear asking for your Uconnect
Security PIN (this is the same 4-digit code established
when your registered your Uconnect Access system).
Enter the Uconnect Security PIN on the keypad and
press “OK.”
4. The Uconnect App will confirm if your command was
sent (or not). Press “OK” to close the pop-up screen.
5. It will take a little while for the command to go through
to your vehicle. The time it takes depends on a number
of technical conditions.
6. A message will appear on the screen to let you know if
the command was received by your vehicle.
NOTE: If you forgot your username or password, links are
provided on the website to help you retrieve them.
2. If you have more than one vehicle registered into the
Mopar
Owner
Connect
website
(moparownerconnect.com), select the vehicle you want
to send the command by clicking on its image along the
top.
3. Beneath the image of a vehicle like yours, you will see a
row of icons. To start the engine, press the “circular
arrow”, to turn-off an engine that has been remote
started press the “cancel” button.
4. You will then be asked to enter your Uconnect Security
PIN (this is the same 4-digit code established when your
registered your Uconnect Access system). Please enter
your Uconnect Security PIN.
5. A message will appear on the screen to let you know if
the command was received by your vehicle.
8
164 ALL ABOUT UCONNECT ACCESS
Uconnect Care:
1. If you need to unlock the doors of your vehicle, contact
Uconnect Care by calling:
855-792-4241
NOTE: The Uconnect Care Agents are trained to help you
with unlocking of your door (for example, in an accidental
lock-out). All other Remote Services should be performed
via
the
Mopar
Owner
Connect
website
(moparownerconnect.com) or through the Uconnect App
on your compatible device.
2. For security purposes, the Uconnect Care Agent will
verify your identity by asking for your 4-digit Uconnect
Security PIN.
3. After providing your Uconnect Security PIN, you can
ask them to lock or unlock your vehicle. The agent will
send a command to your vehicle to get the task done.
FAQs
1. How long does it take to remote start my vehicle?
Depending on various conditions, it can take three
minutes or more for the request to get through to your
vehicle, although Uconnect is always striving to improve performance.
2. Which is faster, my Key Fob or the Uconnect App?
Your Key Fob will remote start your vehicle quicker,
however its range is limited. For example, when you are
leaving the stadium after the game, you can remote start
your vehicle to have the inside comfortable before you
even get there.
3. Will my vehicle be safe if I lose my wireless device?
People sometimes lose their wireless devices, which is
why security measures have been engineered into the
Uconnect App. Asking for your username, password
and Uconnect Security PIN help to ensure that nobody
can start your vehicle if they happen to find your device.
4. Can someone drive off with my vehicle using the
App? No. Driving your vehicle still requires the keys to
be in the vehicle. The Remote Start feature simply starts
the engine to warm-up or cool down the interior before
you arrive, you cannot drive away without the keys.
5. Can I stop a vehicle that is being driven by canceling
the engine start command? No. If a vehicle is driving
down the road the cancel Remote Start button will not
stop it. It simply cancels or ends a Remote Start of the
engine.
ALL ABOUT UCONNECT ACCESS 165
6. Why can’t all devices use the Uconnect App? The
Uconnect App has been designed to work on most
devices with the Apple and Android operating systems.
The capabilities of these device allows us to remotely
command your vehicle. Other operating systems may be
supported in the future.
Remote Horn And Lights
Can’t Find Your Vehicle In The Parking Lot? Sound The
Horn And Flash The Lights On Your Vehicle To Locate It
Description
It is easy to locate a vehicle in a dark, crowded or noisy
parking area by activating the horn and lights. It may also
help if you need to draw attention to your vehicle for any
reason. You can send a request to your vehicle in one of
three ways:
How It Works
1. Download the Uconnect App to a compatible device and
login using your username and password.
2. To turn on the horn and lights, press the “trumpet icon.”
To turn-off the horn and lights, press the “trumpet icon”
again.
3. A pop-up screen will appear asking for your Uconnect
Security PIN (this is the same 4- digit code established
when your registered your Uconnect Access system).
Enter the Uconnect Security PIN on the keypad and
press “OK.”
4. The Uconnect App will confirm if your command was
sent (or not). Press “OK” to close the pop-up screen.
• Using the Uconnect App from a compatible device.
5. It will take a little while for the command to go through
to your vehicle. The time it takes depends on a number
of technical conditions.
• From
the
Mopar
Owner
(moparownerconnect.com).
6. A message will appear on the screen to let you know if
the command was received by your vehicle.
Connect
website
• Contacting Uconnect Care.
If you want, you can set-up notifications for your account
to receive an email or text (SMS) message every time a
command is sent to turn on the horn and lights.
8
166 ALL ABOUT UCONNECT ACCESS
Mopar Owner Connect website:
1. Log on to the Mopar Owner Connect website
(moparownerconnect.com) using the username and
password you used when registering your Uconnect
Access system.
• If you forgot your username or password, links are
provided on the website to help you retrieve them.
5. A message will appear on the screen to let you know if
the command was received by your vehicle.
Uconnect Care:
1. If you need to unlock the doors of your vehicle, contact
Uconnect Care by calling:
855-792-4241
2. If you have more than one vehicle registered into the
Mopar
Owner
Connect
website
(moparownerconnect.com), select the vehicle you want
to send the command by clicking on its image along the
top.
NOTE: The Uconnect Care agents are trained to help you
with unlocking of your door (for example, in an accidental
lock-out). All other Remote Services should be performed
via
the
Mopar
Owner
Connect
website
(moparownerconnect.com) or through the Uconnect App
on your compatible device.
3. Beneath the image of a vehicle like yours, you will see a
row of icons. To turn on the horn and lights, press the
“trumpet icon.” To turn off the horn and lights, press the
“trumpet icon” again.
2. For security purposes, the Uconnect Care agent will
verify your identity by asking for your 4-digit Uconnect
Security PIN.
NOTE: A quicker way to turn off your Remote Horn and
Lights would be to push the “Panic” button on your Key
Fob if you are near the vehicle.
4. You will then be asked to enter your Uconnect Security
PIN (this is the same 4-digit code established when your
registered your Uconnect Access system). Please enter
your Uconnect Security PIN.
3. After providing your Uconnect Security PIN, you can
ask them to lock or unlock your vehicle. The agent will
send a command to your vehicle to get the task done.
NOTE: The Remote Horn and Lights feature is designed to
be loud and get noticed. Please keep in mind the surroundings when using this feature.
ALL ABOUT UCONNECT ACCESS 167
FAQs
1. How long does it take to sound my horn and flash the
lights? Depending on various conditions, it can take
three minutes or more for the request to get through to
your vehicle, although Uconnect is always striving to
improve performance.
2. Which is faster, my Key Fob or the Uconnect App?
Your Key Fob will sound the horn and flash the lights
quicker; however its range is limited.
3. Will my vehicle be safe if I lose my wireless device?
People sometimes lose their device, which is why security measures have been engineered into the Uconnect
App. Asking for your username, password and
Uconnect Security PIN help to ensure that nobody can
access your vehicle if they happen to find your device.
4. How do I turn off the horn and lights after I turn them
on? By pressing the “horn icon” a second time on your
Uconnect App, a second command will be sent to
shutoff the horn and lights. Alternatively, if you are
close enough to the vehicle you can use the Key Fob to
turn off the horn and lights by pressing the red “Panic”
button.
5. Why can’t all devices use the Uconnect App? The
Uconnect App has been designed to work on most
devices with the Apple and Android operating systems.
The capabilities of these device allows us to remotely
command your vehicle. Other operating systems may be
supported in the future.
Vehicle Health Alert
Your vehicle will send you an email alert if it senses a
problem under the hood with one of your vehicles key
systems. For further information go to the Mopar Owner
Connect website moparownerconnect.com.
Over-The-Air Updates — If Equipped
If equipped, your vehicle may feature Over-the-Air Software Updated. This is a method of delivering new software
to a vehicle through a wireless cellular network. Over-theAir Software Updates will make it easier to ensure that
your Uconnect system is at peak performance.
When an Over-the-Air Software Update is ready to install,
a pop-up message will appear on the Uconnect touchscreen
in the vehicle. In order to install the Over-the-Air Software
Updates, your vehicle needs to be in PARK, or in NEUTRAL, with the parking brake engaged if equipped with a
manual transmission. The engine does not need to be
8
168 ALL ABOUT UCONNECT ACCESS
running, however, the ignition much be in the RUN
position. The vehicle should be positioned outdoors if the
engine is running.
When you are ready to accept the update, press “Update
Now” on the touchscreen to start the installation. The
“Later” button will postpone the update to another time.
Some vehicles will allow you to Schedule the installation to
a time that is more convenient to you (for example, when
the vehicle is not being used).
The first phase may take up to 20 minutes to complete. If
the ignition is turned off during this phase, you will have
to restart the engine process from the beginning.
Once the update has reached the 2nd phase, the message
on the touchscreen will tell you that you can turn off the
vehicle, exit, and let the process complete on its own. The
2nd phase may take up to 50 minutes to complete. Once the
2nd phase is complete, the Over-the-Air Software Update
installation is complete.
NOTE: WE DO NOT RECOMMEND YOU DRIVE YOUR
VEHICLE while the update is in progress, as the backup
camera, emergency calling, and other driver assistance
features will not be available while the software update is
being installed.
For further information, refer to DriveUconnect.com (U.S.
Residents) or DriveUconnect.ca (Canadian Residents).
MAINTAIN MY UCONNECT ACCESS ACCOUNT
How To Remove My Uconnect Access Account
To remove your Uconnect Access account or cancel your
Uconnect Access subscription go to the Mopar Owner
Connect website (moparownerconnect.com). On Mopar
Owner Connect, go to Uconnect Store, and click on “Remove My Vehicle.”
For further assistance call Uconnect Care at:
855-792-4241
Adding Vehicles To My Uconnect Access Account
You can easily add vehicles to your Uconnect Access
account online by going to the Mopar Owner Connect
website (moparownerconnect.com) > Dashboard > Add a
Vehicle. Connected vehicles must follow the secure registration process to be added to an account.
ALL ABOUT UCONNECT ACCESS 169
UCONNECT CARE AND FAQs
For additional information about Uconnect Access, push
the ASSIST button on the rear view mirror and then select
Uconnect Care on your in-vehicle touchscreen to contact
Uconnect Care. Your call will be directed to a Uconnect
Care agent or held in a queue until an agent is available or
go
to
the
Mopar
Owner
Connect
website
(moparownerconnect.com).
You can also phone Uconnect Care directly at:
1-855-792-4241
Uconnect Care Business Hours:
Central Time
• Monday through Friday – 7:00 am to 7:00 pm
• Saturday and Sunday – 8:00 am to 4:00 pm
1. How Do I Register For My Uconnect Access Account?
Press the “Apps” button on the in-vehicle touchscreen,
then select Uconnect Registration.
2. Why Do I Need An Email Address? Without an email
address, customers cannot register for Uconnect Access.
Customers need to register so they can subscribe to
receive additional services and create a Uconnect Security PIN for remote command requests.
3. How Do I Create A Uconnect Security PIN? Set up
your Uconnect Security PIN during the registration
process. The Uconnect Security PIN will be required to
authenticate you when accessing your account via
Uconnect Care or performing any remote services such
as Remote Door Lock/Unlock, Remote Horn & Lights,
or Remote Vehicle Start.
4. What If I Forgot My Uconnect Security PIN? If you’ve
already registered and forgot your Uconnect Security
PIN, you can reset the pin by selecting Edit Profile on
the
Mopar
Owner
Connect
website
moparownerconnect.com.
You can also call Uconnect Care at:
1-855-792-4241
8
170 ALL ABOUT UCONNECT ACCESS
5. How Do I Create A Uconnect Payment PIN? Log into
the
Mopar
Owner
Connect
website
moparownerconnect.com with your username and
password. Select Edit Profile > Uconnect Payment Account to create an account (and PIN) (if you have a
Uconnect Access equipped vehicle).
6. What Is A Uconnect Payment PIN? A Uconnect Payment PIN is a unique 4-digit code that you create to gain
access to your payment information – your credit cards,
billing address, payment history and more. It is required
in order to purchase Uconnect Access packages and
Apps.
7. What If I Forgot My Uconnect Payment PIN? The next
time you are asked for your Uconnect Payment PIN,
select “Forgot PIN?” and follow the steps to reset it.
8. How Do I Update My Uconnect Payment Account
Address? Your Uconnect Payment Account address
must be updated online only: Login to the Mopar
Owner Connect website moparownerconnect.com, and
select Edit Profile > Uconnect Payment Account.
9. How Do I Update My Uconnect Profile? Your name,
home address, phone number, email address and
Uconnect Security PIN can be updated online on the
Mopar
Owner
Connect
website
moparownerconnect.com.
a. Log in to the Mopar Owner Connect website
moparownerconnect.com then select Edit Profile to
edit your personal information.
b. Make your edits and click “Save.”
10. Can I Try Apps, Features Or Packages Before I Buy
Them? Your new vehicle purchase may have come
with an included trial period for certain Apps and
services.
For more information please contact Uconnect Care at:
1-855-792-4241
11. Can I Access Every App And Service While Driving?
No, some applications and services are not available
while driving. For your own safety, it is not possible to
use some of the touchscreen features while the vehicle
is in motion (e.g. key pad).
ALL ABOUT UCONNECT ACCESS 171
12. Can I Access The Uconnect Store While I Am Driving? No, some applications and services are not available while driving. Only use Uconnect applications
and services when the vehicle is parked in a safe
location.
17. How Do I Purchase A Subscription Or 3G Wi-Fi
Hotspot? From your in-vehicle touchscreen:
13. How Do I Know When A New App, Feature Or
Package Is Offered? Go to Uconnect Store to check for
updated features, packages and Apps.
c. Follow the steps to enter your Uconnect Payment PIN
and complete the process.
14. Will I Be Notified When My Subscription Is Expired
Or Will It Automatically Renew? There is no autorenewal feature currently offered. You can find the
expiration dates for all of your App and package
subscriptions from your in-vehicle touchscreen, select
Apps > Uconnect Store > My Apps.
15. How Do I Manage My Notification Preferences? Go
to Edit Profile > Uconnect Notifications on the Mopar
Owner Connect website moparownerconnect.com.
16. Do I Receive A Purchase Confirmation? Yes. You will
receive a purchase confirmation email any time you
renew your Uconnect Access subscription or purchase
WiFi Hotspot service.
a. Select Apps > Uconnect Store.
b. Choose a package or service.
You can also go to the Uconnect Store online at
Mopar Owner Connect moparownerconnect.com,
select the Shop tab, then Uconnect Store.
For additional support please contact Uconnect Care
at:
1-855-792-4241
18. How Do I Update My Credit Card Information?
Login to the Mopar Owner Connect website
moparownerconnect.com, and select Edit Profile, then
select Uconnect Payment Account.
19. How Do I Find Out How Much Longer I Have On My
Subscription? From your vehicle touchscreen > select
Apps > Uconnect Store > My Apps and choose a
subscription to view its expiration date. When your
subscription is about to expire you will receive an
email notification.
8
172 ALL ABOUT UCONNECT ACCESS
20. Which Apps Are Included With My Vehicle? Go to
Uconnect Store > My Apps to see Apps currently
available on your vehicle.
21. If I Delete/Remove A Package From My Screen, Does
It Cancel My Subscription? Yes, this removes the
subscription of the selected package.
22. Can I Get A Refund If I Have Not Used The Entire
Subscription? No.
23. Can I Cancel A Subscription Before It Expires? Yes,
but your subscription will still be active until the
expiration date. If you subscribe to another package,
the new subscription will start immediately.
24. Do I Have To Keep My Vehicle On During The App
Download Process? Yes.
25. How Do I Re-Initiate A Download App If There Was
An Error? If you’re having issues with an App you can
reinstall it. This returns the App to its original state
which usually fixes the problem. This does not affect
your Uconnect subscriptions or account information.
To reinstall an App from the in-vehicle touchscreen,
press Apps > Uconnect Store > My Apps > Settings >
Reinstall Apps > Continue.
26. What Should I Do If I Want To Sell My Vehicle?
Before your vehicle is sold to a new owner, you’ll want
to remove your account information. This process
removes all personal information and returns the
Uconnect system to its original factory settings.
To remove your account information from the
Uconnect system contact Uconnect Care at:
1-855-792-4241
27. What If I Forgot To Remove My Account Information
Before I Returned My Lease Vehicle Or Sold It? Don’t
worry – your information is secure.
Contact Uconnect Care at:
1-855-792-4241
28. I Am Trading My Vehicle In. Can I Transfer Apps To
My New Vehicle If I Have An Active Subscription?
No.
ALL ABOUT UCONNECT ACCESS 173
29. What will happen if there is not an operable 1X
(voice/data) or 3G (data) network connection? The
9-1-1 and ASSIST buttons will NOT function if you are
not connected to an operable 1X (voice/data) or 3G
(data) network. Other Uconnect services will only be
operable if your Uconnect Access service is active and
you are connected to an operable 1X (voice/data) or 3G
(data) network.
Safety Guidelines
30. How will I know if my vehicle is not connected to an
operable 1X (voice/data) or 3G (data) network? The
signal strength bars on the “Apps ” button on the
touchscreen will show a single bar and a prohibition
to indicate your vehicle is not connected
symbol
to an operable 1X (voice/data) or 3G (data) network.
NOTE: Your vehicle may be transmitting data as authorized by the subscriber.
Privacy Practices
• Glance at the screen only when safe to do so. If prolonged viewing of the screen is required, park in a safe
location and set the parking brake.
For more information on how FCA US LLC and Sprint may
use your information, please see the Uconnect privacy
policy at driveuconnect.com/privacy/ and the FCA US
LLC privacy statement at
chrysler.com/universal/privacy.html.
WARNING!
ALWAYS obey traffic laws and pay attention to the
road. Some Uconnect Access services, including 9-1-1
and Assist, will NOT work without an operable
1X(voice/data) or 3G(data) network connection.
Ensure that all persons read this manual carefully before
using the radio system. It contains instructions on how to
use the system in a safe and effective manner.
• Stop use of the system immediately if a problem occurs.
Failure to do so may cause injury or damage to the
product. Return it to your authorized dealer to repair.
• Ensure the volume level of the system is set to a level
that still allows you to hear outside traffic and emergency vehicles.
8
174 ALL ABOUT UCONNECT ACCESS
Safe Usage Of The Uconnect Access System
• Read all instructions in this manual carefully before
using your system to ensure proper usage!
• Your system is a sophisticated electronic device. Do not
let young children use your system.
• Permanent hearing loss or damage may occur if you
play your music or otherwise operate the system at loud
volumes. Exercise caution when setting the volume on
your system.
NOTE: Many features of this system are speed dependent.
For your own safety, it is not possible to use some of the
touchscreen features while the vehicle is in motion.
• Keep drinks, rain, and other sources of moisture away
from your system. Besides damage to your system,
moisture can cause electric shocks as with any electronic
device.
Touchscreen
• Do not touch the screen with any hard or sharp objects
(pen, USB stick, jewelry, etc.) which could scratch the
touchscreen surface!
• Do not spray any liquid or caustic chemicals directly on
the screen! Use a clean and dry micro fiber lens cleaning
cloth in order to clean the touchscreen.
• If necessary, use a lint-free cloth dampened with a
cleaning solution, such as isopropyl alcohol, or an
isopropyl alcohol and water solution ratio of 50:50. Be
sure to follow the solvent manufacturer’s precautions
and directions.
Disc Drive
• Do not insert any damaged, warped, scratched or dirty
discs into the disc player.
• Discs that have been modified with an adhesive label
should not be used in the CD/DVD player.
• Do not insert more than one disc at a time into the drive
slot.
FCC Declaration
This device complies with Part 15 of the FCC Rules and IC.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
ALL ABOUT UCONNECT ACCESS 175
interference that may cause undesired operation. Modifications not expressly approved by the radio manufacturer
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and IC. These limits are
designed to provide reasonable protection against harmful
interference in an installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
Increase the separation between the equipment and
receiver.
Consult the dealer or an experienced radio technician for
help.
Safety Information
Exposure to Radio Frequency Radiation
The radiated output power of the internal wireless radio is
far below the FCC radio frequency exposure limits. Nevertheless, the wireless radio shall be used in such a manner
that the radio is 8 inches (20 cm) or further from the human
body.
The internal wireless radio operates within guidelines
found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. The radio manufacturer believes the internal wireless radio is safe for use by consumers. The level of energy
emitted is far less than the electromagnetic energy emitted
by wireless devices such as mobile devices.
DEVICE CONNECTION AND AUDIO TIPS WITH
UCONNECT
• More than one device can be paired to your vehicle. The
connected device with the highest priority will be used.
To transition between devices, Select Phone > Settings,
then press the desired device.
• Multiple devices may be connected at one time. For
example, a device can be paired and connected for
hands-free calling and texting, while a USB media
source is connected for audio. However, only one
Bluetooth connection can be used at a time.
8
176 ALL ABOUT UCONNECT ACCESS
• Device calls will always have the highest priority regardless of which connection is active (only the 9-1-1
Call and Assist will have a higher priority than the
device). For example, if an App is launched and the user
receives a call, the user will be exited out of the App and
returned to the App when the call ends.
• After all devices are connected/paired, when switching
to a different audio source, audio will auto-play from the
new source.
• Current audio (AM/FM/SXM/AUX) will continue to
play when switching to a non-media type App.
• Current audio (AM/FM/SXM/AUX) is muted during
Assist and 9-1-1 Call.
• Device calls will mute all audio except for NAV prompts
if guidance is currently active (audio will resume after
device call is ended).
• All secondary incoming device calls will be treated
similar to “call waiting” (except 9-1-1 Call).
• When connecting a second device via USB, that device
will have priority and auto play accordingly. A device
that is already paired/connected will still be available
for hands-free calling and texting.
• Incoming calls received while entering a nav destination
(before pressing “Go”) will cancel the nav entry. The
user is required to start over when the device call has
ended.
RADIO 3C/3C NAV WITH 8.4 INCH DISPLAY
18UC3CN84-526-AB
Second Edition
Radio 3C/3C NAV with 8.4” Display
Printed in the USA
©2017 FCA US LLC. All Rights Reserved.
Chrysler, Dodge, Jeep, Ram, Mopar and Uconnect are trademarks of FCA US LLC.
FIAT is a registered trademark of FCA Group Marketing S.p.A.,
used under license by FCA US LLC.
DID_3057780_18a_UConnect_3C_C NAV_with_8.4_inch_Display_EN-US_061117.indd 1
9/7/17 4:00 PM
Download PDF
Similar pages