JBL BAR STUDIO
OWNER’S MANUAL
TABLE OF CONTENTS
1.INTRODUCTION3
2. WHAT’S IN THE BOX3
3. PLACE YOUR SOUNDBAR3
PLACE THE SOUNDBAR ON THE TABLE
3
WALL MOUNT THE SOUNDBAR
3
4. CONNECT YOUR SOUNDBAR4
GENERAL
7
INPUT AND OUTPUT
7
BLUETOOTH SECTION
7
PRODUCT DIMENSION AND WEIGHT
7
10.TROUBLESHOOTING
8
SYSTEM 8
SOUND 8
CONNECT SOUNDBAR TO YOUR TV
4
BLUETOOTH 8
CONNECT SOUNDBAR TO OTHER DEVICES
4
REMOTE CONTROL
8
HOW TO POWER ON YOUR SOUNDBAR SYSTEM
4
5. USE YOUR SOUNDBAR SYSTEM4
TO CONTROL
4
HOW TO USE BLUETOOTH WITH YOUR SOUNDBAR
5
HOW TO USE A USB DEVICE
5
6. SOUND SETTING6
BEFORE YOU START
6
ADJUST THE VOLUME
6
CHOOSE SOUND EFFECT
6
7. RESPOND TO YOUR TV REMOTE CONTROL6
FOR MOST SAMSUNG, LG, SONY AND VIZIO TVS
6
FOR OTHER TVS
7
8.SYSTEM7
2
9. PRODUCT SPECIFICATIONS7
1. AUTO STANDBY
7
2. AUTO WAKE UP
7
3. APPLY FACTORY SETTING
7
4. SOFTWARE UPDATE
7
English
1. INTRODUCTION
Wall Mount Brackets
Thank you for purchasing the JBL BAR STUDIO. The JBL BAR
STUDIO is designed to bring an extraordinary sound experience
to your home entertainment system. We urge you to take a few
minutes to read through this manual, which describes the product
and includes step-by-step instructions to help you set up and get
started.
CONTACT US: If you have any questions about JBL BAR
STUDIO, its installation or its operation, please contact
your retailer or custom installer, or visit our website at:
www.JBL.com.
2. WHAT’S IN THE BOX
x1
Product Information & W
all-mounted guide
x1
3. PLACE YOUR SOUNDBAR
3a. Place the Soundbar on the table
Soundbar
x1
Remote Control
Battery size of remote control: CR2025
3b. Wall mount the Soundbar
Use tape to stick the wall-mounted paper guide on the wall, push
a pen tip through the center of each mounting hole to mark the
wall-mounted bracket location and remove the paper.
Power Adaptor
(4ft, 1200mm)
x1
Power Cables*
(5ft, 1500mm)
x1
x1
Screw the wall mount brackets on the pen mark; screw the
threaded mounting post into the back of the soundbar; then hook
the soundbar on the wall.
*Power cable types and numbers varied by regions
Optical Cable
(4ft, 1200mm)
AUX cable
(4ft, 1200mm)
x1
x1
www.jbl.com
3
4. CONNECT YOUR SOUNDBAR
This section helps you connect your soundbar to a TV and other
devices, and set up the whole system.
Connect Soundbar to your TV
Connect Soundbar to other devices
Connect devices through analog audio cables
Using an analog cable, connect the AUX IN (3.5mm jack) on your
soundbar to the AUX IN/ 3.5mm connectors on your portable
devices.
Connect your soundbar to a TV. You can listen to audio from TV
programs through your soundbar.
AUX cable
Connect to TV through HDMI (ARC)
An HDMI connection supports digital audio and is the best option
to connect to your soundbar. If your TV supports HDMI ARC, you
can hear the TV audio through your soundbar by using a single
HDMI cable.
AUX-IN
AUX-OUT
How to power on your soundbar system
HDMI
HDMI (ARC)
Note: Do confirm that the HDMI CEC function on your TV
is turned on.
Connect to TV through Optical
An Optical connection supports digital audio and is an alternative
to an HDMI audio connection.
1
3
2
5. USE YOUR SOUNDBAR SYSTEM
1. To Control
a. How to use top panel controls
Note: Confirm to set your TV audio settings to support “external
speakers” and disable the built-in TV speakers.
4
Power Volume Volume Source
Down
Up
English
Remark: Press and hold remote control Bluetooth button for
3 seconds if you want to pair another mobile device
b. How to use Remote Control
1
6
3
2
4
BT
AUX
HDMI
SHUFFLE
USB
OPTICAL
VOLUME
MUTE
BASS
7
5
8
11
9
12
SOUND MODE
14
16
NIGHT
MODE
13
AUDIO
FEEDBACK
SURROUND
15
10
1) Power
2) Bluetooth
3) Aux
4) HDMI
5) Shuffle / Repeat*
6) USB
7) Optical
8) Volume +
9) Volume 10)Mute
11) Bass +
12) Bass –
13) Sound mode**
14) Night mode On / Off
15) Audio Feedback On / Off
16) Surround On / Off
3. How to use a USB device
Play music files located on USB storage devices through the
soundbar.
1.Connect a 2.0 USB drive to your soundbar on the back of
your device.
2.Press “USB” button on the remote control. If USB is
detected, music will start playing automatically.
Shuffle
Press “SHUFFLE” button to switch between shuffle/ repeat
all/ repeat one/ off
*For USB playback only; switch between shuffle/ repeat all/ repeat one/ off
**Switch between standard/ movie/ music/ voice/ sports sound mode
c. Source LED indication
USB
BLUETOOTH
AUX
BT
AUX
HDMI
SHUFFLE
USB
OPTICAL
MUTE
BASS
VOLUME
OPTICAL
SOUND MODE
HDMI ARC
2. How to use Bluetooth with your Soundbar
a)Press Remote Control Bluetooth button to enter Bluetooth
source
(Default)
Off
Shuffle
Repeat Repeat
one
all
NIGHT
MODE
AUDIO
FEEDBACK
SURROUND
Before you connect a USB device, be aware of the following:
• Playback sequence is by actual physical address in USB device.
•This soundbar can play files that contain numbers or English
characters only. Other languages and symbol may not be
supported.
PAIRING
BT
AUX
HDMI
SHUFFLE
USB
OPTICAL
VOLUME
MUTE
BASS
AUDIO
FEEDBACK
•DRM-protected music files (MP3, WMA) from commercial web
sites cannot be played.
Compatible USB devices
SOUND MODE
NIGHT
MODE
• Do not remove the USB device while it is transferring files.
SURROUND
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB 2.0.
b)Select “JBL Bar Studio” to pair with the soundbar
Steps: Setting -> Bluetooth -> JBL Bar Studio
•Some USB devices may not be supported.
USB device requirement
•Devices which require additional program installation connected
to a computer, are not supported.
• Do not extract the USB device while in operation.
CONNECTED
Settings
Bluetooth
•For a large capacity USB, it may take longer than a few minutes to
be searched. The soundbar does not support USB devices with
2000 files or more on it.
Bluetooth
DEVICES
JBL Bar Studio
Connected
Now Discoverable
Choose "JBL Bar Studio" to connect
•
The soundbar USB port cannot be connected to PC. Your
soundbar can not be used as storage device.
•The exFAT and NTFS file system is not supported on this unit.
(FAT16/FAT32 systems are available.)
www.jbl.com
5
•Depending on some devices, it may not available to recognize the
followings on this unit.
-- External HDD
-- Card readers
-- Locked devices
-- Hard type USB devices
-- USB hub
-- Using USB extension cable
-- iPhone/iPod/iPad
-- Android device
Standard Movie
Music
Voice
Sport
4. Night mode
6. SOUND SETTING
This section helps you choose the ideal sound for your video or music.
Before you start
• Make the necessary connections described in the user manual.
•On the soundbar, switch to corresponding source for other devices.
Adjust the volume
• Press VOLUME +/- button to increase or decrease a volume level.
• To mute sound, press MUTE button.
•
To restore the sound, press MUTE button again or press
VOLUME +/- button
Choose sound effect
1. Surround sound mode
•
Experience an immersive audio experience with JBL
surround sound mode.
• Press SURROUND button to turn surround mode on or off.
LED behaviour
LED behaviour
Night mode On
LED with blink white 2 times, then keep
constant white for 5 seconds
Night mode Off
LED with blink white 2 times
5. Audio feedback
Audio feedback enables audible tones indicate certain product
features. When Audio feedback is ON, you will hear tones for
specific actions on the JBL Bar Studio:
• Enter Bluetooth pairing
• Bluetooth device is connected
• Reach maximum volume
• Surround mode On/Off
LED behaviour
Surround On
LED with blink white 2 times, then keep
constant white for 5 seconds
Audio feedback
On
LED with blink white 2 times, then keep
constant white for 5 seconds
Surround Off
LED with blink white 2 times
Audio feedback
Off
LED with blink white 2 times
• On: Create a surround listening experience.
• Off: Two-channel stereo sound. Ideal for listening to music.
2.Bass
Press and hold 5 seconds SOUND button to reset default
audio setting.
• Press BASS +/- to change the bass level.
3. Sound mode
•For quiet listening, night mode decreases the volume of
loud sounds when audio is played.
• Night mode is only available for Dolby Digital soundtracks.
• Press NIGHT MODE button to turn night mode on or off.
• Select predefined sound modes to suit your video or music.
• Press SOUND MODE button to select a sound option.
•Select the STANDARD mode if you want to enjoy the original
sound.
•Select the MOVIE, MUSIC, VOICE, SPORT mode depending
on the content you want to listen to.
7. RESPOND TO YOUR TV REMOTE CONTROL
Use your own TV remote control to control your soundbar
7a. For most Samsung, LG, Sony and Vizio TVs*
The soundbar responds to your TV remote control automatically.
Controllable functions are volume up/down and mute. Press and
hold SHUFFLE button on soundbar remote control if you want to
disable this function.
6
English
8. SYSTEM
1. Auto standby
This soundbar automatically switches to standby after
10 minutes of button inactivity and no audio/video play from a
connected device.
BT
AUX
HDMI
USB
OPTICAL
MUTE
BASS
SHUFFLE
VOLUME
>3 s
2. Auto wake up
*For non-compatible TV models, please follow section 7b and do IR remote learning
Note:
–Make sure that the sound output of your TV is set to “External
speaker”.
–Depending on the remote control, this function may not work
well.
–This function does not operate on LG TV’s magic remote control.
– This function may not work well when HDMI CEC is ON.
–Some remote control may not operate if you press repeatedly the
volume button.
– If your TV remote control is not supported, follow section 7b and
do IR remote learning.
7b. For other TVs, do IR remote learning
To program the soundbar to respond to your TV remote control,
follow these steps. First, press and hold VOLUME+ and SOURCE
button to enter learning mode.
(1)
The soundbar has a signal detector that can automatically* turn
the unit ON when it senses an audio signal from the last detected
connection eg. AUX, Optical, Bluetooth or HDMI source.
*Depending on TV models or source devices, some devices may not be able to
wake up the soundbar automatically.
3. Apply factory settings
Reset this soundbar to the default settings programmed at the
factory.
•In any source mode, long press VOLUME -, VOLUME+ and
SOURCE button on soundbar top panel.
4. Software Update
JBL may offer updates for soundbar’s system firmware in the
future. If an update is offered, you can update the firmware by
connecting a USB device with the firmware update stored on it
to the USB port on your soundbar. Please visit www.JBL.com
or contact JBL call center to receive more information about
downloading update files.
>5 s
9. PRODUCT SPECIFICATIONS
General
Then, press POWER button on the soundbar and press POWER
button on the TV remote control
(2)
• Power Input : 19VDC, 2.0A
• Total Maximum Power
: 30W
• Standby Power Consumption
: <0.5W
• Soundbar Transducer Size
: 2 x 2” woofer
2 x 1.5” tweeter
• Max SPL : 90db
• Frequency Response
: 60Hz - 20KHz
• Operating Temperature
: 0°C - 45°C
Input and Output
• HDMI Video Output(with Audio
Return Channel)
: 1
• HDMI HDCP Version : 1.4
• Audio inputs : 1 Analog, 1 Optical, Bluetooth, USB
(3)
BT
AUX
HDMI
SHUFFLE
USB
OPTICAL
MUTE
BASS
VOLUME
SOUND MODE
Follow the same procedure for VOLUME - and VOLUME +. For
mute, press both VOLUME + and VOLUME - button on soundbar
and press MUTE button on TV remote control. Press and hold
VOLUME+ and SOURCE button on soundbar again for 5 seconds
and now your soundbar responds to your TV remote control*.
NIGHT
MODE
AUDIO
FEEDBACK
SURROUND
*Depending on TV models, the soundbar may not respond to TV remote control.
Bluetooth section
• Bluetooth Version : 4.2
• Bluetooth Frequency Range : 2402MHz - 2480MHz
• Max Transmitting Power : 9dbm (EIRP)
• Modulation Type : GFSK, π/4 DQPSK,
8DPSK
Product dimension and weight
• Soundbar Dimensions (W x H x D) :
• Soundbar Weight
:
• Packaging Dimensions (W x H x D) :
• Packaging Weight (Gross)
:
614 x 58 x 86 (mm) \ 24.2” x 2.3” x 3.4”
1.4kg \ 3.1 lbs
852 x 126 x 146 (mm) \ 33.5” x 5.0” x 5.7”
2.76kg \ 6.1 lbs
www.jbl.com
7
Note: JBL Bar Studio can only support sample rate <=96K audio
but cannot support >96K audio content. There will be some
expected noise output if you are playing those frequency >96K
audio content.
10. TROUBLESHOOTING
If you have problems using this product, check the following points
before you request service.
Bluetooth
A source device cannot connect with the soundbar.
• You have not enabled the Bluetooth function of the source
device. See the user manual of the source device on how to
enable the function.
•The soundbar is already connected with another Bluetooth
device. Press and hold Bluetooth button on your remote
control to disconnect the connected source device, then try
again.
System
•Reboot your Bluetooth device and try to pair again with the
soundbar.
The unit will not turn on.
Quality of audio play from a connected Bluetooth device is poor.
Sound
•
The Bluetooth reception is poor. Move the source device
closer to the soundbar, or remove any obstacle between the
source device and the soundbar.
No sound from soundbar.
• Make sure that the soundbar is not muted.
The connected Bluetooth device connects and disconnects
constantly.
• Check if power cord is plugged into the outlet and the soundbar
• On the remote control, select the correct audio input source
•Connect the audio cable from your soundbar to your TV or other
devices.
•Reset your soundbar to its factory settings via press and hold
VOLUME -, VOLUME+ and SOURCE button on soundbar top
panel
Sound is strange after sound setting adjustment
•Reset audio setting by press and hold SOUND button on remote
control for 5 seconds
Distorted sound or echo.
•If you play audio from the TV through the soundbar, make sure
that the TV is muted.
Торговая марка
:
Назначение товара
:
Изготовитель
:
Страна происхождения
:
Импортер в Россию
:
Гарантийный период
:
Информация о сервисных центрах :
Срок службы
:
Товар сертифицирован
•The Bluetooth reception is poor. Move your source device
closer to the soundbar, or remove any obstacle between your
Bluetooth device and the soundbar.
•For some Bluetooth device, the Bluetooth connection can
be deactivated automatically to save power. This does not
indicate any malfunction of the soundbar.
Remote Control
The remote control does not work.
•
Check if the batteries are drained and replace with new
batteries.
•If the distance between the remote control and the main unit
is too far, move it closer to the unit.
JBL
Активная акустическая система
Харман Интернешнл Индастриз Инкорпорейтед, США, 06901 Коннектикут, г.Стэмфорд,
Атлантик Стрит 400, офис 1500
Китай
OOO “ХАРМАН РУС СиАйЭс“, Россия, 127018, г.Москва, ул. Двинцев, д.12, к 1
1 год
www.harman.com/ru
тел. +7-800-700-0467
5 лет
:
Дата производства
:
Дата изготовления устройства определяется по двум буквенным обозначениям из второй группы
символов серийного номера изделия, следующих после разделительного знака «-». Кодировка
соответствует порядку букв латинского алфавита, начиная с января 2010 года: 000000-MY0000000,
где «M» - месяц производства (А - январь, B - февраль, C - март и т.д.) и «Y» - год производства
(A - 2010, B - 2011, C - 2012 и т.д.).
HARMAN International Industries,
Incorporated 8500 Balboa
Boulevard, Northridge, CA 91329
USA
www.jbl.com
© 2017 HARMAN International Industries, Incorporated. All rights reserved.JBL
is a trademark of HARMAN International Industries, Incorporated, registered in the
United States and/or other countries. Features, specifications and appearance are
subject to change without notice. The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN
International Industries, Incorporated is under license. Other trademarks and trade
names are those of their respective owners. The terms HDMI, the HDMI logo, and
High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries. Dolby, Dolby Audio, Pro
Logic, and the double-D symbol are trademarks of Dolby Laboratories.
TR04281_A
8
Download PDF
Similar pages