DLED-5300 MINI GLOW Series

DLED-5300 MINI GLOW Series
LED 50,000 Hour Dimmable Light Channel with Enclosure
95 Lumens per Foot - 2.5 Watts per Foot - CRI 80
TYPE
PROJECT
CATALOG NUMBER
Fixture Description: A continuous LED dimmable light strip mounted inside a cylindrical clear or
frosted acrylic channel (maximum 12 foot run per feed) that offers a warm, soft, even glow at a huge
savings over incandescent or halogen. Runs cooler than incandescent or halogen, and contains no
harmful gasses. 50,000 hour lamp life saves on maintenance and re-lamping costs.
Construction: 20 LED diodes per foot wired into rigid LED channel with jumper wire and feed wire
pre-wired and attached. For lengths over 69”, two strips are connected by a 1” flex wire joiner to
create a single length of up to 138” max.
Electrical: 24 Volt AC. 2.5 Watts per foot. 95 lumens per foot. Dimmable.
Mounting: Mounts into coves or other surfaces with clips. Plastic clip supplied standard. Stainless
steel clip available. Specify SSC to order.
Warranty: 5 years or 50,000 hours.
Applications:
• Coves • Light Pockets • Accent Lighting • Undercabinet Lighting • Reveal Molding
Note: Actual length of LED will be less than tube length.
WARNING: Recommended power supply: Use approved Class II magnetic transformers or
Lutron Constant Voltage Drivers.
Note: Dimmers used must be approved for magnetic loads and use direct current or voltage
regulation, such as Lutron Diva Series. Dimmers that use phase forward dimming technology
must have a neutral. Check with factory for compatibility.
Important Design Requirements for Applications with Ambient Temperatures Exceeding 80°F:
Mounting clips should be used to support LED tubes. A 1/4” free space should be provided at
each end of the tube and between tubes that butt together. A 1/16” space is needed on each
side of the tube. The spaces noted are to allow the tube to expand as the temperature increases. If Silicone is used to support tube, only apply Silicone to top center area, approximately 1/3
of tube. Leave ends of tube free to move a minimum of 1/4” forward and back.
Please consult our website for any updated specifications on this product:
www.dreamscapelighting.com
LED Strip
5/8” Diameter
Optional
Stanless Steel
Clip (SSC)
7/8”
Clip
End View
1/2”
Clip
Side View
5/8”
Available in 3” increments
3” - 69” max. length
LED Specifications
69”
69”
Voltage
24V AC
Watts
2.5W per foot
Lumens per Foot
95
Color Temperature
2700K, 3000K, 6500K, Blue, Red, Green, Yellow
CRI
80
Beam Spread
120°
Maximum Run
12’
Maximum Single Length
6’
Mounting
Clips
Warranty
5 years / 50,000 hours (in an environment that reaches no higher
than 60°C / 140°F) NOTE: Please contact factory regarding
warranty if fixture is exposed to higher ambient temperatures.
Max. single run
72” - 138” max. length with wire joiner.
2 separate lengths joined with 1“ flex wire for LED Strips from 72” - 138“.
NOTE: Connectors are not to be used in damp and wet location. Use appropriate wire nut connectors.
Linear LED J-Box
Overhead View
Linear LED J-Box
Side View
Conduit / Flex
1-1/2”
Secondary Wire Spec
50W
Maximum Distance
50 feet
Wire
16AWG 2/C Type CM-CL2
ETL-CM CL3
Standard copper conductor
LED Length
DLED-5300
___________ “M.O.L.
1-3/8”
4-1/4”
DLED-5300
Maximum Load
Model Number
Clear or Frosted
Acrylic
Extrusion
5/8”
2 - 3/4” K.O.’s
HOW TO MAKE AN OPTIMAL M.O.L.* CALCULATION
Finish area measurement
(make sure it is divisible by 3)
+ 1/2” PER 6’ LENGTH
= OPTIMAL M.O.L.
*M.O.L. is the Maximum Overall Length for the LED linear fixture that you are ordering.
Acrylic
Material
Wire Format
Feed Wire Length (F)
Jumper Wire Length (J)
Pigtail Length (P)**
Color Temp.
CL (Clear)
FR (Frosted)
EW
End Wire (Std.)
1.5”, 3”, 6”,
12”, 18”, 30”,
CUSTOM
None* (0), 1.5”, 3”, 6”,
12”, 18”, 30”
CUSTOM
0”, 3”, 12”
36”, CUSTOM
2400K
2700K
3000K
6500K
Blue
Red
Green
Yellow
Ordering Example: DLED-5300-45-1/2”M.O.L.-CL-EW-F6”-J3”-P3”-2700
NOTE:
All LED lengths 75” - 138” are made up of 2 separate units joined together by a 1” flex wire. FOR CURVILINEAR APPLICATIONS - SPECIFY .75”
*JUMPER LENGTH You can specify “0” for no jumper wire on end. **PIGTAIL LENGTH: 1 pigtail per run (specify 3”, 12”, 36” or Custom).
©2014 Dreamscape Lighting
Specifications are subject to change
without notice.
5521 Washington Blvd.
Los Angeles, CA 90016
Telephone: (323) 933-5760
FAX: (323) 933-3607
www.dreamscapelighting.com
info@dreamscapelighting.com
DLED-5300_041414
Download PDF
Similar pages