SE571-576 English quick start guide

Quick start guide
SE571/SE576
What’s in the box
Base station (SE576)
Charger*
Base station (SE571)
Power adapter*
Line cord**
Handset*
User manual
Quick start guide
Guarantee
Note
*
In multi-handset packs, there
are additional handsets,
chargers and power adapters.
**
In some countries, you have
to connect the line adapter to
the line cord, then plug the line
cord to the telephone socket.
Caution
• Use only the supplied batteries
and power adapter.
1
Connect
Connect the base station
Telephone
socket
Power
socket
Power
socket
Power
adapter
3
Telephone
base station
1
2
Extra handset
charger
1 Connect each end of the power adapter to:
• the DC input jack at the bottom of the base station;
• the power socket on the wall.
2 Connect each end of the power adapter to (for multi-handset
packs):
• the DC input jack at the bottom of the extra handset charger.
• the power socket on the wall.
3 Connect each end of the line cord to:
• the telephone socket at the bottom of the base station;
• the telephone socket on the wall.
2
Install
Install the handset
1 The batteries are pre-installed in the handset. Pull the battery
tape off from the battery door before charging.
2 Place the handset on the base station to charge the handset.
When the handset is placed correctly on the base station, you
hear the docking sound.
»» The handset starts charging.
Charge 8 hours
Note Charge the batteries for 8 hours before first use.
Check the battery level
When the handset is off the base station/charger, the
bars indicate the battery level (full, medium and low).
When the handset is on the base station/charger, the
bars keep scrolling until charging completes.
The empty battery icon flashes and you hear an alert
tone.
The battery is low and needs recharging.
3
Enjoy
Call
• To make a call, press and dial the phone number.
• To answer a call, press when the phone rings.
• To end a call, press .
Adjust the earpiece volume
Press
or
to adjust the volume during a call.
Add a contact in the phonebook
1 Select [MENU] > [PHONEBOOK] > [NEW
ENTRY], then press [SELECT] to confirm.
2 Enter the name then press [OK] to confirm.
3 Enter the number, then press [SAVE] to confirm.
Record an announcement
(for SE576 only)
1 Select [MENU] > [ANSWER MACHINE] >
[ANNOUNCEMENT], then press [SELECT] to
confirm.
2 Select [ANSWER & REC.] or [ANSWER ONLY],
then press [SELECT] to confirm.
3 Select [RECORD], then press [SELECT] to confirm.
4 Start recording close to the microphone after the beep.
5 Press [OK] to stop recording.
»» You can listen to the newly recorded
announcement on the handset.
Listen to messages recorded on the answering machine (for SE576 only)
aSwitch on/off the answering machine: Press .
bStart/Stop listening to the recorded messages: Press 29.
cAdjust the volume: Press + / –.
dSkip backward:
c
a
b
f
e
d
When you listen to the messages, press ¡ to listen to the
message from the beginning.
During the first second of the current message, press ¡ to listen
to the previous message.
eSkip forward: Press ™ to skip to the next message.
fDelete the current message: Press X.
Note For more information, see the Telephone answering machine
section in the user manual.
Welcome to Philips
Register your product at www.philips.com/welcome
Need help?
User manual
Refer to the user manual that came with your new phone.
Online help
www.philips.com/support
Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
0168
Printed in China
QSG_SE571-576_EN_V1.0
WK10195
Download PDF
Similar pages