WATTSTOPPER®
DIGITAL LIGHTING MANAGEMENT WIRELESS DLM
BORDER ROUTER
LMBR-600
Dual internal antennas with diversity
provide robust signal strength and
reliable communication
Low voltage power option for ease of
install and reduced cost
Mounting bracket with integrated
cable tie down
Provides secure self forming mesh
network for up to 50 DLM rooms
Includes out-of-box wireless AES
128-bit encryption
Single Ethernet port for LAN
connectivity and management
Use LMCS software to easily
commission the border router and
mesh network
Compatible with LMSM-3E and
LMSM-6E Segment Managers
for seamless BACnet integration,
scheduling, and demand response
support.
Description
The wireless border router manages the creation and
configuration of the 6LoWPAN wireless network for up to
50 DLM rooms, and provides network connectivity via wired
Ethernet to a local area network (LAN). Wireless nodes connect
to the border router to establish mesh routing paths. The
border router is quickly commissioned using LMCS and also
provides live information to LMCS about the health of the mesh
network in the form of signal quality, device status, network
status, and other real-time network information. Secure
wireless communication using AES 128-bit encryption ensures
the most advanced levels of security in the industry.
Operation
The LMBR-600 border router acts as a management and
gateway device for 6LowPAN wireless network bridges. Each
border router manages wireless nodes that have joined to its
secure Personal Area Network ID (PanID). Management and
troubleshooting of the border router is done using LMCS 4.6.2
and later. All border routers are LAN connected using ethernet
via Cat 5e cable back to a DLM network enclosure with a
Segment Manager (LMSM-3E/6E) for management and setup
of schedules, groups, and demand response. Event settings are
written to non-volatile memory. In a case of power failure, date
and time are held current in unit for at least 14 days via internal
battery.
Applications
The LMBR-600 is ideal for any installation with multiple spaces
that require a networked lighting control system to meet code,
centralize management or monitor energy use. Wireless offers
added flexibility during initial install and over the life of the
space.
Features
• Compatible with Digital Light Management LMBC-600
wireless bridges
• Compatible with RACCESS remote access services provided
by Wattstopper
• Supports up to 50 wireless bridges and 400 devices
(recommended design is 40 bridges per border router and
320 devices)
• Simple commissioning with LMCS 4.6.2 and newer
–– Set up PANs, Channels and other network parameters
–– View network health like signal quality and network health
–– View network bridge device status
–– Update firmware for LMBR-600 and LMBC-600
• 6LoWPAN wireless standard delivers reliable, long range,
low latency wireless communication that is scalable for a
single room or entire buildings with thousands of rooms
• Plenum rated solution when powered by the LMPB-100
• Secure self forming wireless network with AES 128-bit
encryption
WWW.LEGRAND.US/WATTSTOPPER
• Compatible with SegMan 2.3 and newer
–– BACnet communication for building management system
integration
–– Setup and manage automated schedules for lights and
color temperature (HCL)
–– Configure Demand Response options for code compliance
Specifications
• Current Consumption: 65mA
• Power Supply: either IRB powered using dedicated LMPB-100
with DC barrel-to-RJ45 connector cable or 120VAC plug-in
power supply
• Connections: RJ45 10/100 Ethernet, External USB Port,
Internal USB Port, 2- RS232 Serial Ports, 1 DC Barrel
Connector
• Security
–– Wireless Encryption: 6LoWPAN (AES 128bit Key Encryption)
–– Preshared (uncommissioned nodes)
–– Key rotation (provisioned nodes)
–– Asymmetric Cryptographic Key Management
–– 256bit Digital Certificate Node Authentication
• Network/IOT protocols
–– IEEE IPV6
–– Constrained Application Protocol (CoAP)
–– Routing Protocol for Low Power Networks (RPL)
–– Stateless Multicast Forwarding (SMRF)
• Wireless
–– IEEE 802.15.4 , 2.4GHz
–– Available Channels: 11–26, default 15
non-overlapping 15, 20, 26
–– Wireless Standard: 6LoWPAN
–– Dual internal, omni-directional antennas with diversity
–– Bandwidth: up to 156kbps
• Device Capacity: up to 50 LMBC-600 wireless bridges and
400 room devices (recommended design is 40 bridges per
border router and 320 devices)
• Real-time clock with supercap battery back-up (up to 14 days)
• Storage: Internal MicroSD Card
• RoHS Compliant
• UL and cUL listed (E101196)
• UL 2043 Plenum rated
• Five Year Warranty
Mounting and Dimensions
6.7”
172mm
4.4”
111mm
1.2”
31mm
LMBR only
1.3”
33.5mm
LMBR w/ bracket
6.8”
173mm
Typical Connections to DLM Local Networks and Segment Network
DLM Rooms
with LMBC-600
Wireless Bridge
Ethernet
Plenum Power
Connection
for LMBR-600
LMNC
RJ45 to Barrel Connector
LMBR-600
Border Router
Power Supply
LMPB-100
NB-Switch
Non-Plenum Power
Connection
for LMBR-600
120VAC Power Supply
Segment
Manager
Modem
Ordering Information
Catalog #
LMBR-600
Description
Wireless Border Router With BACnet and 6LoWPAN
WWW.LEGRAND.US/WATTSTOPPER
Pub. No. 25983r1 Rev. 01/2018
Download PDF
Similar pages