mixlaser ii v1_user manual

Mixlaser II
LCG-301B
User Manual
Please read this manual carefully before use!
Mixlaser II User Manual
Contents
Introduction----------------------------------------------------------------------------P2
Laser warning labels----------------------------------------------------------------P3
Safety instruction -------------------------------------------------------------------P4
Product specification---------------------------------------------------------------P5
Menu operation, function ---------------------------------------------------------P6
Channel instruction ----------------------------------------------------------------P7
DMX Connection-------------------------------------------------------------------- P8
Address setting----------------------------------------------------------------- P8/P9
Structure and material-------------------------------------------------------P10/P11
Installation and Size--------------------------------------------------------------- P12
Maintenance and warning ----------------------------------------------------- P13
--1--
Mixlaser II User Manual
Introduction
Thank you for purchasing this product. To optimize the performance of this product, prior to use,
please read these operating instructions carefully to familiarize yourself with the basic operation of
this unit .Please keep the manual in safe price for future reference.
This unit has been tested at our factory before being shipped to you, there is no assembly required.
Once after received this product, please take and put carefully. And check cautiously that whether
the product was damaged or not during the transportation.
Checking Parts
Please check if the following parts are included:
1 x LED Laser Light
1 x Power cable
1 x User manual
Caution
Before out factory, this device has passed strict inspection, functions stable and perfect
packing. If this device will be operated in any way different to the one described in this
manual, the product may suffer damages and the guarantee becomes void. Furthermore,
any other operation may lead to dangers like short circuit, burns, electric shock, crash etc.
If any technology changes of this manual, company do not notice in further and have
interpretation.
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
Warning!
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems.
--2--
Mixlaser II User Manual
Laser warning labels
Mixlaser II
NON-INTERLOCKED HOUSING WARNING
The Royal Sky contains high power laser devices internally. Do not open the laser housing, due to
the potential exposure to unsafe levels of laser radiation. The laser power levels, if the unit is opened,
can cause instant blindness, skin burns and fires.
STOP AND READ ALL LASER SAFETY DATA
OPERATION INSTRUCTIONS AND LASER SAFETY
The light source emitted from this product can potentially cause eye injury if not set up and used
properly. The light source emitted from a laser is very different from any other light sources with
which you may be aware of. Laser light is thousands of times more concentrated than any light from
any other kind of light source. This concentration of light can cause instant eye injuries, primarily by
burning the retina (the back of your eyeball contatining cells that are sensitive to light). Even if you
cannot feel “heat” from a laser beam, it can still potentially injure or blind you or your audience. Even
--3--
Mixlaser II User Manual
very small amounts of laser beam light are potentially hazardous even at long distances. Laser eye
injuries can be sustained faster than you can blink.
Do not think that because this laser splits the laser beam into hundreds of beams and that the laser
beam is scanned out in high speed, that an individual laser beam is safe for eye exposure. This laser
uses dozens of milliwatts of laser power (Class 3B levels internally) before it splits into multiple
beams (Class 3A levels). Many of the individual beams are potentially hazardous to the eyes.
Do not that because the laser light is moving, it is safe. This is not true. Nor, do the laser beams
always move. Since eye injuries can occur instantly, it is critical to prevent even the smallest
possibility of any direct eye exposure. In the laser safety regulation, it is not legal to aim Class 3A
lasers in areas which people can get exposed. This is true even if it is aimed below people’s faces,
such as on a dance floor.
Do not operate the laser without first reading and understanding all safety and technical data
in this manual.
Always set up and install all laser effects so that all laser light is at least 3 meters (9.8 feet) above the
floor on which people can stand.
After setting up, and before public use, test laser to ensure proper function. Do not use if any defect
is detected. Do not use if laser emits only one or two laser beams rather than dozens/hundreds, as
this could indicate damage to the diffraction grating optic, and could allow emission of higher laser
levels above Class 3B.
Do not point lasers at people or animals. Never look into the laser aperture or laser beams.
Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled
balconies, etc.
Do not point lasers at highly reflective surfaces, such as windows, mirrors and shiny metal. Even
laser reflections can be hazardous.
Never point a laser at aircraft, this is a federal offense.
Never point un-terminated laser beams into the sky.
Do not expose the output optic (aperture) to cleaning chemicals.
Do not use laser if the laser appears to be emitting only one or two beams.
Do not use the laser if the housing is damaged, the housing is open, or if the optics appear damaged
in any way.
Never open the laser housing. The high laser power levels inside of the protective housing can start
fires, burn skin and will cause instant eye injury.
Never leave this device running unattended.
The operation of a class 3B laser show is only allowed if the show is controlled by a skilled and welltrained operator, familiar with the data included in this manual.
The legal requirements for using laser entertainment products vary from country to country. The user
is responsible for the legal requirements at the location/country of use.
Always use proper lighting safety cables when hanging lights and effects overhead.
Safety Instructions
 Please open and check whether break or not for transport once receive this fixture, if yes, not use
it and contact dealer or manufacture as soon as possible.
 The Max applicable temperature for the light is 40°C. Do not use the light under or above the
--4--
Mixlaser II User Manual
temperature. ta=40℃
 The fixture is applicable for many occasions, it should keep clean, and avoid long use in
overheating or dusty environment. To prevent the fixture from the chemical liquid .
 User must be careful of fire, heat, electric and fall-off that make heavy or fatal injury. Please read
this user manual carefully before power on and installation, following safety and operation
instruction in it. If still have any questions, please contact dealer or manufacture.
 User must following this user manual, do not open fixture by yourself, if any problems, please
contact professional technician, maintenance should by technician.
Do not power on or start the fixture before installation, please stop after working more than 8
hours, which will longer use life.
 Fixed installation, do not by strong shocks.
 The minimum distance between light and the illuminated surface must be more than 1 meter.
 Never look directly into the light source to avoid hurt to eyes (especially epileptics)!
 When dustproof glass at light output breaks, cracks or other visible damage, user should replace
with new glass to continue to use.
Installation
 When install this equipment please make sure there's no flammable surfaces (decorated things,
etc) and minimum distance of 0.5M from the equipment to the flammable.
 The installation of the effect has to be built and constructed in a way that it can hold 10 times the
weight and without any harming deformation.
 The installation must always be secured with a secondary safety attachment, e.g. an appropriate
safety rope.Never stand directly below the device when mounting, removing or servicing the
fixture.
Technical Specifications
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Power supply: AC100V~240V 50/60Hz
Amp::BGDP ¢5x20mm 250VAC T2A
Rated power: 70W
Laser: R:150mw/650nm,G:50mw/532nm
LED:6pcs 5W RGBWAP;8pcs 3W White LED
LED effect:Derby
Laser effect:8 grating effect
Control mode: Sound Active/ Auto-play/DMX512/Master-Slave
Channels:10 DMX Channels
Scan system:Step motor
Operating temperature:10°C~40°C
Inner Packing(mm):340*270*340
Outer Packing(mm):700*560*370 (4pcs)
--5--
Mixlaser II User Manual
LED Digital Display
E
A
B
C
A.(MENU)
B.(UP)
C.(DOWN)
D.(ENTER)
E.LED Display
D
Operating Instruction: press button marked as “A” to select a function, For details, please see the
“OPERATION MENU” section. Press button marked as “B” or button marked as “C” to modify
values . Press button marked as “D” to save your settings.
LED Digital Display Operation Menu:
No.
Menu
1
Addr
2
SLNd
Function
DMX address DOWN/UP to +/- (1-512)
NASt,Master Mode
SLAv,Slave Mode
Aut1,Auto Play1,six colors led derby effect auto play
Aut2,Auto Play2,white led auto play
3
AUTO
Aut3,Auto Play3,laser auto play
Aut4,Auto Play4,all effects auto play
SPEE,auto speed 0-99
Sou1,Sound Active 1
4
Soun
Sou2,Sound Active 2
Sou3,Sound Active 3
SESE,sound sensitivity 0-99
5
Vers
Ve1.0
1.When starting up, it will display the last time’s operation .In case without any buttons,
it will close screen automatically after 20seconds.When no DMX, the first dot of led
display will keep on. When has DMX, the first dot will blink
2. At most 10 lights could be linked in one electricity source.
Function:
1. Press MENU to select Addr / SLNd/Auto/Soun / Vers , Press ENTER to the next menu or save,
Press UP / DOWN to select function, Press ENTER to save; Long Press MENU to exit.
--6--
Mixlaser II User Manual
2.
3.
4.
5.
6.
Addr, Address setting,DOWN/UP to select 1-512
SLNd, Master/Slave setting
Auto,Auto mode
Soun,Sound mode
Vers,version
Channel
DMX-512Value 0-255
CH1 Control Mode
CH2
RGBWYV
Control
0-9
Auto Play1(Six colors LED auto)
40-69
Auto Play2(White LED auto)
70-99
Auto Play3(Laser auto)
100-129
Auto Play4(Mixing auto)
130-159
Sound Control 1(Six colors LED sound)
160-189
Sound Control2(White LED sound)
190-219
Sound Control3(Laser sound)
220-249
Sound Control4(Mixing sound)
250-255
DMX Mode
0-9
199-225
226-255
CH4
Auto Play LED
Eotic Speed
LED Strobe
CH5 White Color LED
0-255
0-9
Laser color
control
Color chase 2(single or multiple)
Auto speed,LED color chase speed from
slow to fast
LED No strobe
245-255
LED strobe by sound
0-9
0-127
128-255
CH7
Choose colors(63 groups), each 3 data
for 1 color group
Color chase1(single color)
LED Strobe Speed from slow to fast
135-255
White Strobe and
Eotic Speed
RGBWYP black-out
10-244
10-134
CH6
Black- out
10-39
10--198
CH3
Details
0-9
Whit LED black out
White LED output position choose,5
data for only 1 choose
White LED chase effect
no strobe, but White LED chase speed
from slow to fast
With strobe, white LED chase speed
from slow to fast
Laser off
10-49
Red
50-89
Green
--7--
Mixlaser II User Manual
CH8
CH9
Laser Strobe
Control
LED Step Motor
Control
90-129
Red and Green
130-169
Red and Green flicker
170-209
210-249
Green and Red flicker
Red, green synchronous flicker
250-255
Red, green alternative flicker
0-9
10-244
Strobe Speed(from slow to fast)
245-255
Laser strobe by sound
0-8
9-127
128-255
CH10
Laser Step Motor
Control
Strobe Off
0-127
128-255
Step motor Off
Step Motor clockwise from slow to fast
Step Motor counterclockwise from slow
to fast
Laser pattern choose
Laser pattern chase from slow to fast
DMX-512 connection
3-Pins DMX Out
3-Pins DMX In
(Female)
1 Earth
(Male)
2 DMX-
3 DMX+
DMX address setting
Each fixture must set a specific starting address. When receiving signal transmission, fixture will
receive channel control signals which from the starting address.
According to different requirements or easy to use, the user can set many value fixtures to the same
address, also can set up a separate address for every device.
If you set the same address,all the devices will receive from DMX channels signal. All connecting
fixtures are jointly controlled, controller can't separate control a device.
If you set a different address, each device will be separate from its particular set the starting address
--8--
Mixlaser II User Manual
and begin accepting DMX512 control signal, so that more convenient separate control one device.
Using this method must be based on channel quantity of device to determine a starting address.
This light has 10 channels. When you use 10CH, you should set the starting address of the first unit
to 1, the second unit to 11(10+1), the third unit to 21 (11+10), and so on.
10CH for example
First(address 001)
Second(address 011)
DMX in
Third(address021)
DMX out to next light
--9--
Mixlaser II User Manual
Structure and material
- - 10 - -
Mixlaser II User Manual
No.
Model No.
Name
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
LCG-301B-04
LCG-301B-05
LCG-301B-03
LCG-301B-02
LCG-301B-06
LCG-301B-07
LCG-301B-09
LCG-301B-08
LCG-301B-10
LCG-301B-11
LCG-301B-12
LCG-301B-13
LCG-301B-14
LCG-301B-16
LCG-301B-15
LCG-301B-18
LCG-301B-17
LCG-301B-19
Base plate
Top cover
Back plate
Front plate
Clapboard
Handle
Head cover
Motor stand 1
Locating plate
Motor stand 2
Reflection plate
Reflection dish
FPC
Red laser plate
Green laser plate
Reverse bracket
Stand flange
Motor flange
19
13*10*1.1mm
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39*
quantit
y
1
Material No
1
1
1
1
1
1
1
1
1
1
4
1
1
1
1
1
1
311003111
311006073
311002074
311001100
311020001
316001088
311012014
313001058
321001014
313001059
313028001
322013007
315001100
313003010
313003008
314001013
313001060
319001030
Pass red, reflect green
1
302005003
MB-29
MB-22A
ABL-54A
ABL-55A
LB-RG1
GZLU90-S 12V-7.5A
AB-24A (w ith indicator light)
Red Laser: 100mW/650nm
Green Laser: 50mW / 532nm
Male, 25v, 10A
250v/10A, with fuse
IN, /K3F2C-B
OUT,/J3F2C-B
3010, DC12V, 0.08A
M8*12
25mm stand, 45° lens
60*39.5*9.5
Plastic parts
14*14*1.2mm
HYS8-12, 40*2. 3mm
Main Board
LED Driver Board
Aluminum base plate 1
Aluminum base plate 2
Power
Switch power
Display board
R180B4
G300H2
Power socket
Power socket
DMX IN ( male)
DMX OUT (female)
Fan
Handle screw
LED lens parts
convex mirror
convex lens holder
Shivering glass
8 grating
1
1
1
8
1
1
1
1
1
1
1
1
1
1
2
8
8
8
80
1
205001115
205002023
205003102
205003103
203022001
204001056
205004019
202109007
202008005
301923008
301923002
301909007
301909008
301701025
306020003
302018003
302012028
303010012
302019026
302001108
40
24BYJ48-36,DC12V
Step Motor
1
301601012
41
42
43
39HB105C-12
20* 8*3mm
M6,Outer ring 20mm
Step Motor
Rubber mat
Ring
1
2
1
301601004
303002004
306019007
46
Meteor shower 020T, 10*10*1.1mm
Grating filter
1
302001104
- - 11 - -
Mixlaser II User Manual
Installation
1 Clamp
2 Handle
When install this equipment please make sure there's no flammable surfaces
(decorated things, etc) within at least 2.5M and maintain minimum distance of 0.5M
from the equipment to the walls.
Please make sure that there's no other equipment or decorating materials obstructed
the exhaust fan and the vent-pipe.
Products should be install immobility.
In case of safety, it's very important that to connect the earth with line.
Product size
- - 12 - -
Mixlaser II User Manual
Declaration
Cleaning and maintenance
Cleaning should be performed every 15-day period, by using a sponge which is dipped with
alcohol, rather than wet cloth or other chemical liquid, to clean the mirror.
CAUTION
Cut off power before cleaning and maintenance!
Attention
Do not see directly light source when open the light, and make sure power off before do any
installation or maintenance.
CAUTION
Wires connection must be professional person!
- - 13 - -
Download PDF
Similar pages