SHAR~
;fi~1J 5-7 l..I t::::'mmtiH:tlfi~
LCD Color TV Wall-Mount Bracket
Televiseur couleur LCD et Ie support de
montage au mur
Wandhalter fOr LCD-Farbfernsehgerat
Mensula de montaje el TV color de cristal
Ifquido en la pared
Rl~ *~~~fj[*JlJtl tm~ tt14=
I{Xm~Bjn!f
OPERATION MANUAL
MODE D'EMPLOI
BEDIENUNGSANLEITUNG
MANUAL DE MANEJO
.fie JtI j.~ a.,ij ~
8*(0]11
For Japan
Pour Ie Japon
FOr Japan
Para Jap6n
tlHl S
*
~#l1oJ11
For Europe Pour l'Europe Fur Europa Para Europa t~H!~7JtI
*~.
g~1oJ11
For U.S.A.
and Taiwan
y:Jy.
For Asia regions Pour les pays
~#l1oJ11
=m:~1oJ[1
~~fDJI1
Pour les
Etats-Unis
etTaTwan
Fur USA
undTaiwan
Para los
EE.UU.
y Taiwan
tjijtt~oo,
Fur asiatische
Regionen
und Australien
Para las
regiones de
Asia y Austalia
tIHl5lE7JtI,
_j;:;fJJ5lE
For Hong Kong Pour Hong Kong FOr Hongkong Para Hong Kong
t~ttifm
and Australia
For Korea
asiatiques
ell'Australie
Pour la Coree
FOr Korea
Para Corea
€:i~
tj!!tt~oo
LC-30AD1 • LC-30AD2
LC-30BV3 • LC-30BV5
LC-30HV3 • LC-32GD1
LC-32GD2 • LC-32GD3
LC-32GD4 • LC-37AD1
LC-37AD2 • LC-37BD5
LC-37GD1 • LC-37GD2
LC-:37GD3 • LC-37GD4
LC-37U5-B/-R • LC-37L5-B/-T
LC-37W5C/K • LC-45GD1
LC-30AD1 E· LC-30HV2E
LC-30HV4E· LC-37AD1 E
LC-37HV4E
LC-30HV2U· LC-30HV4U
LC-30HV6U· LC-37HV4U
LC·37HV6U • LC-37G4U
LC-32G4U • LC-32GD4
LC-32GD6 • LC-37GD4
LC-37GD6 • LC-45GX6
LC-30HV2M· LC-30HV4N
LC-30AA1M· LC-37HV4M
LC-37AA1M
LC-30HV2H • LC·30HV4H
LC-30AA1H • LC-37HV4H
LC-37AA1H
LC-30HV2D· LC-30HV4D
LC-37HV4D
• Thank you for purchasing a SHARP product.
Before using the product, please be sure to read this operation manual carefully. In particular, be sure to
read the section "To Ensure Safe and Correct Use." After reading the manual, keep it in a convenient
location where it can be accessed at any time.
To Ensure Safe and Correct Use
This operation manual and the product use various displays and labels to ensure safe use. Ignoring
these displays and labels and incorrectly using the product could have results as classified below.
Please read the following warning symbol information before reading the rest of this section, and be
sure to strictly observe all instructions.
6
6
Warning:
Caution:
!Meaning of symbol
Not following these instructions could result in death or serious injury.
Not following these instructions could result in injury or property damage.
I The symbol
(9
means something that should not be done.
Special Precautions for Safety
& Warning
• Follow the instructions in this manual regarding the installation method and installation
orientation. Not following these instructions could results in injury or damage from falling parts.
• Accurate work is required for the installation work, so please have it done by the dealer or
qualified contractor.
• During installation, be careful not to pinch your fingers in the fixture, etc.
• Make sure the installation wall is sufficiently strong to support the weight of the TV. (Attach the
fixtures to the reinforcing material in the walls.)
• Do not apply any other loads to the installation fixtures. Doing so could cause the TV to fall
causing injury and damage.
• Do not modify or change the installation parts. Doing so could cause the TV to fall causing
injury and damage.
~ Caution
Install in a location with low humidity and little dust
" " ' • Do not install the LCD color TV in a
location with high humidity and
much dust. Doing so could result in
fire or electric shock.
" " ' • Do not place the LCD color TV
where it will come into contact with
oily smoke or steam, such as near
a cooking range or humidifier.
Doing so could result in fire or
electric shock.
\y
\Y
Install in a
well~ventilated
area
• Do not plug the air passage holes in
the LCD color TV cabinet. Plugging
the air passage holes could trap heat
inside the cabinet, causing a fire.
• Do not use the cabinet as follows.
Do not place the cabinet in a place
with poor air circulation, such as in a
closet or bookcase. Do not place a
drop cloth, etc., on the installed LCD
color TV.
E-1
To the contractor
-To ensure the safety of the customer, conduct the
design so that the strength of the installation
location is sufficiently strong to support the weight
of the LCD color TV and the wall-mount bracket.
- Be sure to use two or more people to conduct the
work.
- The wall installation screws for the wall-mount
brackets are not included with the fixtures. Select
off-the-shelf screws that match the wall.
Outside dimension drawing
IBased bracket I
18
LO
LO
o
ex>
C\J
28
6.5
4-
25
15
4
0
C\J
0
C')
0
00
C\J
o
C\J~
C')
ex>
0
C\J
C\J
C')
15
C\J
C\J
Unitmm
E-2
Accessories packaged with the TV
Based bracket: 1
6
Wall-mount bracket: 1
0
For Model 30
Attachment bracket
(51 mm thick): 1 (BV)
~
@
Attachment bracket
(41 mm thick): 1 (HV)
..
@
•
@
@
Angle setup bracket: 2
Operation manual
(ThiSma
q
* Assembly completed for
perpendicular installation.
Screws
For fastening the wallmount bracket
M5length:
8mm
(2 screws)
~
~
For the angle
setup bracket
M6length:
15mm
(2 screws)
~
~
IFor attachment installation
M4 length: ,.A ,.A
12mm
~~
(4 screws) 1-. 1-.
V
*The screw notation M5 means that the diameter of the threads is 5mm.
*Please also store the screws that are not used.
I
For TV installation
~~
® M6length:
30mm (4 screws)
® or ®
~~
~~
® M6length:
12mm (4 screws)
• Wall installation screws (off-the-shelf screws) 16 to 20
Be sure to consult the dealership or a qualified contractor when installing the TV.
• A plumb bob of hole making hardness (coin), etc., with a string attached.
• A pin, such as a thumbtack • Cushion, soft cloth, etc. • Tool (Phillips head screwdriver)
Installation location
.•
• LCD color TVs have a viewing angle (range in which the image can be viewed
correctly). The best viewing position is from directly in front of the screen. Determine
the TV installation location after taking into consideration the viewing posture, line of
sight, ahd the visual and aural ranges.
• Sharp shall bear no responsibility for damages, etc., caused by the LCD color TV
falling due to insufficient installation strength or improper installation.
Weight table (Unit: kg)
•
rox.18.4
rox.18.9
rox.23.2
rox.19.3
rox.19.3
rox.19.3
rox.23.6
rox.23.6
rox.23.6
rox.22.7
rox.20.7
rox.24.1
rox.23.4
rox.26;6
rox.25.5
rox.29.2
Using the Wall Mount Brac.ket (Option)
The wall mount bracket is specially designed for displays 30" and larger.
Note
• Consult with your dealer and leave the installation up to a specialized person at Sharp dealer or authorized service shop.
• Make sure that the wall or place where the display is mounted should be made of plywood of 5/6" (15mm) or over in
thickness, otherwise the wall would be necessary a reinforcement work for the
23/64"_33/64".·
--113/64,,_15/64"
safety.
_
[9 mm"'13 mm] ~t[5 mm"'6 mm]
• The screws to fix the based bracket on the wall are not included in the product and
5/32"_13/64"
25/32'orlong,er
in the optional bracket. Use the commercially available screws, however, make sure [4 mm"'5 mm]
[20 mm-J
the dimensions shown as follows. (14 t018 pieces)
E-3
Wall-Mount Bracket Installation
Determine the location where the based bracket will be installed.
Take the coin with the string and align it perpendicular to the based bracket.
Use a pencil, etc., to mark the two screw hole locations.
() shaped screw holes
Cellophane tape, etc. ~
Use a pencil, etc., to mark the screw hole
position on the wall behind the bracket.
Display screen center position
Wall-mount bracket
unit installation hooks
~
Perpendicular
reference line
Q
Q
M
~
0
L~
~
.. - ..
Use this as a reference for the display
height position.
,
~:jlAL\CJ
I
I
,
'
I
'-13 ,
.......
_""'"
'lvlalftliiigfJ",·
r
.
I
I
.
.'
II Malrkirlg
t:J
LC-37GD1, LC-37GD2
LC-32GD1, LC-32GD2
LC-37G4, LC-32G4
LC-37U5-B/-R, LC-37L5-B/-T
LC-37W5C/K, LC-45GD1
LC-37GD4, LC-32GD4
LC-37GD3, LC-32GD3
LC-45GX6, LC-37GD6
LC-32GD6
I
I .... ..... I
Perpendicular ------..o:~~--;
reference line
LC-37BD5, LC-37HV4
LC-37AD 1, LC-37AD2
" '. ILC-37HV6, LC-37AA 1
I
I
LC-30BV5, LC-30BV3
LC-30HV2/4
LC-30AD1 LC-30AD2
I LC-30HV3,
I
Included part: Based braclet
Loosely screw in the screws.
Temporarily remove the based bracket from the wall and loosely screw in 2 off-the-shelf
screws in the screw hole positions marked on the wall. At this time, the screw heads should
extend several mm above the wall so that the based bracket can be hung on the screw
heads. Hang the based bracket on the installed screws, check to make sure the bracket is
not sagging to the left or right, and then firmly tighten the screws. Use off-the-shelf screws
to secure the remaining screw holes (14 to 18 screws).
Min.4mm
II
~
6
c
Wall~
~
~
E-4
Use the weight with the
string used in Step 1 to
make sure the bracket
is perpendicular.'
Set the angle of the wall-mount bracket
The wall-mount bracket is assembled for perpendicular installation, so to use it for tilted
installation, please follow the procedure below to set it at the installation angle .
•
• When setting the angle of the wall-mount bracket, be careful not to pinch your
fingers, etc.
• There is a limit to the angle that can be set depending on the model.
Setting Angle Chart
»
i<
*(1) Models for which the destination market is Japan.
*(2) Models for which the destination market is other than Japan.
>
><
«
i<
<> • •.
••••••••••••••
>
.......
LC-37BD5, LC-37HV4, LC-37AD2, LC-30BV5, LC-30BV3,
LC-30HV3, LC-30HV2, LC-30HV4, LC-30AD2, LC-37U5-B/-R,
LC-37L5-B/-T, LC-37W5C/K, LC-32GD4
i«·>i
<
0°,5°,10°
15°,20°
LC-32GD2, LC-32G4
0°,5°,10°,15°
LC-30AD1 *(1), LC-37GD4, LC-32GD3, LC-32GD6
LC-30HV6, LC-30AA1, LC-30AD1 *(2), LC-37AD1, LC-37HV6,
LC-37AA1, LC-37GD2, LC-37G4, LC-37GD3, LC-37GD6
0°,5°,10°
0°,5°
LC-37GD1, LC-32GD1, LC-45GD1, LC-45GX6
0°
Setting the insta,lIation angle.
D Remove the 2 vertical installation screws. These screws are used when setting the
angle.
'hUMi@MiWbii"i.iil,I'M@'
6
Assemble the wall-mount bracket as desired as shown in the figure. (Figure shows
a 20° angle.) Use the screws removed in Step 1 (M6 length: 1.5mm x 2 screws) and the
included screws M6 length: 15mm x 2 screws to loosely fasten the angle-setup bracket
with 4 screws. Firmly tighten these 4 screws after the angle-setup bracket position has
been determined.
Included part: Screws M6 15mm length (2 screws)
As the screw hole numbers become larger (5, 10, 15,
20), the LCD color TV will be tipped farther forward.
There is a limit to the angle that can be set depending
on the model.
Included part: Wall-mount bracket
E-5
Installing the wall-mount bracket (For Model 45 inch Separate Type)
Use the following procedures to install the Model 45 inch LCD color TV (LC-45GD1, LC-45GX6).
•
• When installing the wall-mount bracket to the LCD color TV, place the LCD color TV face
down on a soft cloth 'or cushion.
• The stand can be removed while the LCD color TV standing upright, but Model 45 inch is
quite large, so for safety's sake, the explanation of how to remove the stand is given with the
LCD color TV laying down.
Remove the terminal covers on the back of the LCD color TV.
Soft cloth or cushion.
Remove the table stand.
- Remove the screws (4 screws) fastening the table stand, and then remove the table stand.
(Remove after pulling in the direction shown by the arrow.)
Save the removed stand fastening screws (4 screws).
Stand fastening
screws (4 screws) - - - - - - -
E-6
Installing the wall-mount bracket (For Model 45 inch Separate Type) (Continued)
Perform the cable work.
Install the back terminal cover.
E-7
Installing the wall-mount bracket (For Model 45 inch Separate Type) (Continued)
Install the wall-mount bracket.
Install the wall-mount bracket (with the angle set) to the back of the LCD color TV.
o Align the wall-mount bracket screw holes (Marked A: 4 locations) to the LCD
color TV back holes.
6
Use th'e included M6 30mm length screws for TV installation
® (4 screws) to
, securely fasten the wall-mount bracket.
* When there are caps in the 4 holes on the back of the LCD color TV, remove
these ahead of time.
Included part: M6 30mm length screws
(4 screws)
ForTV installation
I
®
Included part: Wall-mount bracket
Included part: Wall-mount bracket
E-8
Installing the wall-mount bracket (For Model 37 inch Separate Type)
Use the following procedures to install the Model 37 inch LCD color TV (LC-37AD1 , LC-37AD2,
LC-37BD5, LC-37HV4, LC-37HV6, LC-37AA1, LC-37GD1, LC-37GD2, LC-37G4, LC-37U5-B/-R,
LC-37L5-B/-T, LC-37W5C/K).
•
• Be sure to use two people to perform the wall-mount bracket installation work for
the Model 37 inch LCD color tV.
• The installation work must be conducted while the Model 37 inch LCD color TV is
standing upright, so be careful that it does not fall over.
Remove the back terminal covers from the LCD color TV.
Remove the terminal covers while the LCD color TV is standing upright.
Wire in the cables.
Install the top terminal cover.
E-9
Installing the wall-mount bracket (For Model 37 inch Separate Type) (Continued)
Install the wall-mount bracket.
Install the wall-mount bracket (with the angle set) to the back of the LCD color TV.
o Align the wall-mount bracket screw holes (Marked A: 4 locations) to the LCD
color TV back holes.
II Use the included M6 30mm length screws for TV installation ® (4 screws) to
securely fasten the wall-mount bracket.
* When there are caps in the 4 holes on the back of the LCD color TV, remove
these ahead of time.
For TV installation
Included part: Wall-mount bracket
E-10
®
Installing the wall-mount bracket (For Model 37 inch Separate Type) (Continued)
Remove the table stand.
o Remove the stand fastening screws from the 4 locations in the wall-mount bracket.
fA ·Have two people lift the LCD color TV off of the table stand.
Save the removed stand fastening screws (4
scre~s).
o
Included part: Wall-mount bracket
o
II
o
'bBd
Du,
;:: r":0'~.
~.-
~OJQ ~
''-J:
,~:
: ··_·,~,·_---_·_····J8'····:
Use the screwdriver to remove the 4
stand fastening screws from these
holes.
E-11
Installing the wall-mount bracket (For Model 37 inch Integrated Type)
Use the following procedures to install the Model 37 inch LCD color TV (LC-37GD3,
LC-37GD4, LC-37GD6).
•
• Be sure to use two people to perform the wall-mount bracket installation work for
the Model 37 inch LCD color TV.
• The installation work must be conducted while the Model 37 inch LCD color TV is
standing upright, so be careful that it does not fall over.
Remove the back terminal covers from the LCD color TV.
Remove the terminal covers while the LCD color TV is standing upright.
Install the side terminal covers.
E-12
Installing the wall.. mount bracket (For Model 37 inch Integrated Type) (Continued)
Install the wall-mount bracket.
Install the wall-mount bracket (with the angle set) to the back of the LCD color TV.
o Align the, wall-mount bracket screw holes (Marked I: 4 locations) to the LCD
color TV back holes.
6
Use the included M6 12mm length screws for TV installation
® (4 screws) to
securely fasten the wall-mount ,bracket.
*. When there are caps in the 4 holes on the back of the LCD color TV, remove
these ahead of time.
o
For TV installation
®
Mark I
Included part: Wall-mount bracket
E-13
Installing the wall-mount bracket (For Model 37 inch Integrated Type) (Continued)
Remove the table stand.
Remove the screws (4 screws) fastening the table stand, and then have two people
lift the LCD color TV off of the table stand.
Save the removed stand fastening screws (4 screws).
II
E-14
I
Installing the wall-mount bracket (For Model 32 inch Separate Type)
Use the following procedures to install the Model 32 inch LCD color TV (LC-32GD1, LC32GD2, LC-32G4). The explanation is given using LC-32GD2 as an example, but the
installation procedure is also the same for LC-32GD1, LC-32G4.
•
• When installing the wall-mount bracket to the LCD color TV, place the LCD color
TV face down on a soft cloth or cushion.
Remove the terminal covers on the back of the LCD color TV.
Remove the table stand.
Remove the screws (4 screws) fastening the table stand, and then remove the table stand.
(Remove after pulling in the direction shown by the arrow.)
Save the removed stand fastening screws (4 screws).
Stand fastening
screws (4 screws)
E-15
Installing the wall-mount bracket (For Model 32 inch Separate Type) (Continued)
Perform the cable work.
Install the back terminal cover.
E-16
InstaUing the wall-mount bracket (For Model 32 inch Separate Type) (Continued)
Install the wall-mount bracket.
Install the wall-mount bracket (with the angle set) to the back of the LCD color TV.
o Align the wall-mount bracket screw holes (Marked A: 4 locations) to the LCD
color TV back holes.
6
Use the included M6 30mm length screws for TV installation
securely fasten the wall-mount bracket.
*
® (4 screws) to
When there are caps in the 4 holes on the back of the LCD color TV, remove
these ahead of time.
Included part: M6 30mm length screws
(4 screws)
For TV installation
I
®
Included part: Wall-mount bracket
Included part: Wall-mount bracket
E-17
Installing the wall-mount bracket (For Model 32 inch Integrated Type)
I
Use the following procedures to install the Model 32 inch LCD color TV (LC-32GD3,
LC-32GD4, LC-32GD6).
~--------------'
•
• When installing the wall-mount bracket to the LCD color TV, place the LCD color
TV face down on a soft cloth or cushion.
Remove the terminal covers on the back of the LCD color TV.
Soft cloth or cushion.
Remove the table stand.
Remove the screws (4 screws) fastening the table stand, and then remove the table stand.
(Remove after pulling in the direction shown by the arrow.)
Save the removed stand fastening screws (4 screws).
Stand fastening
screws (4 screws) - - - - - - -
E-18
Installing the wall-mount bracket (For Model 32 inch Integrated Type) (Continued)
Perform the cable work.
Install the side terminal covers.
E-19
Installing the wall-mount bracket (For Model 32 inch Integrated Type) (Continued)
Install the wall-mount bracket.
Install the wall-mount bracket (with the angle set) to the back of the LCD color TV.
o Align the wall-mount bracket screw ho.les (Marked I: 4 locations) to the LCD
color TV back holes.
6
Use the included M6 12mm length screws for TV installation
securely fasten the wall-mount bracket.
® (4 screws) to
* When there are caps in the 4 holes on the back of the LCD color TV, remove
these ahead of time.
I
Included part: M6 12mm length screws
(4 screws)
ForTV installation @
Included part: Wall-mount bracket
Mark I
r1u' BE]ioh
~D
\J
io
:0
~o
0
o~
LJ'
0:
0
00
o~
:
0
0
:
~
g
g
~
0
0
Included part: Wall-mount bracket
E-20
.
Mark I
Installing the wall-mount bracket (For Model 30 inch Separate Type)
Use the following procedures to install the Model 30 inch LCD color TV (LC-30AD1 *(2),
LC-30HV2I4, LC-30HV6, LC-30AA1). The explanation is given using LC-30HV4 as an
example, but the installation procedure is also the same for LC-30AD1 *(2), LC-30HV2, LC30HV6, LC-30AA1.
•
*(2) Models for which the destination market is other than Japan.
• When installing the wall-mount bracket to the LCD color TV, place the LCD color
TV face down on a soft cloth or cushion.
Remove the terminal cover on the back of the LCD color TV.
cloth or cushion.
Remove the table stand.
Remove the screws (6 screws) fastening the table stand, and then remove the table stand.
(Remoye after pulling in the direction shown by the arrow.)
The removed screws (6 screws) are used in Step 3 (Page 22).
Stand fastening
screws (6 screws)
E-21
Installing the wall-mount bracket (For Model 30 inch Separate Type) (Continued)
•
• When installing the wall-mount bracket, use the attachment that matches the model of LCD
color TV that was purchased.
*(2) Models for which the destination market is other than Japan.
(Top side)
(Bottom side)
Attachment bracket
Perform the cable work.
E-22
Attachment bracket
Installing the wall-mount bracket (For Model 30 inch Separate Type) (Continued)
Installing the wall-mount bracket
o Remove the 4 screws installed in the back of the unit and align the screw holes of
the wall-mount bracket (Mark 8: 4 locations) with the locations from which the
screws were removed. Use the 4 removed screws to fasten the wall-mount bracket.
6
Align the wall-mount bracket screw holes (Marked "0" when using the attachment
bracket HV: 4 locations) with the attachment bracket screws (4 locations) and fasten
securely using the 4 included attachment installation screws (M4 length: 12mm).
Screws included in the back of
the LCD color TV.
&...+--+-+--+---'
Included part:
Wall-mount bracket
r-m:===
o~
"/
o
\
/~
Mark S
\
/
/
\"
MarkD-----;;-(Attachment bracket HV)
MarkS
-----:;.---MarkD
(Attachment bracket HV)
Included part: Wall-mount bracket
E-23
Installing the wall-mount bracket (For Model 30 inch Integrated Type)
Use the following procedures to install the Model 30 inch LCD color TV (LC-30AD1 *(1),
LC-30AD2, LC-30BV5, LC-30BV3, LC-30HV3). The explanation is given using LC-30BV5 as
an example, but the installation procedure is also the same for LC-30AD1 *(1), LC-30AD2,
LC-30BV3, LC-30HV3.
*(1) Models for which the destination market is Japan .
•
• When installing the wall-mount bracket to the LCD color TV, place the LCD color
TV face down on a soft cloth or cushion.
Remove the terminal covers on the back of the LCD color TV.
Soft cloth or cushion.
Remove the table stand.
Remove the screws (6 screws) fastening the table stand, and then remove the table stand.
(Remove after pulling in the direction shown by the arrow.)
.
The removed screws (6 screws) are used in Step 3 (Page 25).
Stand fastening
screws (6 screws)
E-24
Installing the wall-mount bracket (For Model 30 inch Integrated Type) (Continued)
•
• When installing the wall-mount bracket, use the attachment that matches the
model of LCD color TV that was purchased.
~--------------------.
LC-30AD1 *(1), LC-30AD2, LC-30BV5, LC-30BV3
LC-30HV3
*(1) Models for which the destination market is Japan.
(Top side)
(Bottom side)
Attachment bracket
Attachment bracket
Perform the cable work.
Install the side terminal covers.
E-25
Installing the wall-mount bracket (For Model 30 inch Integrated Type) (Continued)
Installing the wall-mount bracket
o Remove the 4 screws installed in the back of the unit and align the screw holes of
the wall-mount bracket (Mark B: 4 locations) with the locations from which the
screws were removed. Use the 4 removed screws to fasten the wall-mount bracket.
6
Align the wall-mount bracket unit screw holes (Marked "e" when using the attachment bracket BV: 4 locations, marked "D" when using the attachment bracket HV: 4
locations) with the attachment bracket screws (4 locations) arid fasten securely
using the 4 included attachment installation screws (M4 length: 12mm).
Screws included in the back of
the LCD color TV.
Included part:
Wall-mount bracket
• When using attachment
bracket BV, align it with
Mark C.
• When using attachment
bracket HV, align it with
MarkO.
;~B~;
@
/
MarkB\
Mark D
(Attachment bracket HV)
@
•
0
~
..
\
rT}
/Mark B
0
O~_O--;';;-I
~ o~ ~ i
MarkC~~~
(Attachment bracket BV)
0
--Mark 0
(Attachment bracket HV)
~~MarkC
o.
Included part: Wall-mount bracket
E-26
(Attachment bracket BV)
Installing the LCD color TV on the wall
•
• Be sure to use 2 people when install'ing the LCD color TV to the based bracket.
• Be sure to perform Steps 1 and 2 below. Only performing Step 1 could result in
the display falling and injuring someone.
Install the wall-mount bracket attached to the LCD color TV to
,the based bracket.
Hang the square holes of the wall-mou nt bracket on the hooks (page 4) of the based
bracket.
Make sure the hooks are
engaged.
LCD TV
Wall
o
1-T"'-~'7"""./::""----- Based bracket
Tighten the wall-mount bracket and based bracket screws.
(Be sure to do this.)
Tighten from the bottom.
Included part: M5 screws 8mm length (2 screws)
T~//7rh(t/77~~[;---!»r///
These holes- are used for LC-45GD1, LC-37GD1 and LC-32GD1.
E-27
ca~mm~1:!::;9-.
*8**13~~
TEL
j!§8$*13~~
TEL
~L-
FAX
FAX
043 - 299 - 8280
06 - 6792 - 5993
28_",_o_-_=-,_··~[;_u_0)_rd'3_'~_S_L_""·*I3_~_~_,D_0)_L_·~
_P'1_1~_L_·~_.,.._P,~_<_tc._t!'_l,_'o
~
_
http=lIwww.sharp.co.jp!
...:....--=---------=-=:...--
L--
*
043 ~ 297 - 4649
06 - 6621 - 4649
:tt
=r545-8522
AVVATl\*~*BB ;=329-2193
_
*lI.&mlJii.J{glJ~~$ti!1BJ22.22~
*Di*~~'Jim!FJllmJl74.
SHARP CORPORATION
* c:::
O)mWl~B,E]~Id:~~m~fSem G"LlJ 'a:; go
* This Operation Manual is made from recycled paper.
* Ce mode d'emploi est fabrique a partir de papier recycle.
* Diese Bedienungsanleitung ist aus Recyclingpapier hergestellt.
* Este manual de manejo se imprimia en papel reciclado.
**f£j'H5ta~ 1t~:f£m:ji}~~iMJ£o
8*~lJJmU
Printed in
lmprime au
Gedrukt in
Improso en
Japan
Japan
Japan
Japan
1± B::$:£P.GPtl
9HKAN-37-21 O~
04E.I/K