Australian Monitor | AMDFM Dynamic Microphone

AMDFM
Dynamic Microphone
The AMDFM is a dynamic noise cancelling
fist microphone tailored specifically for high
intelligibility and crystal clear paging situations.
Featuring a shock mounted dynamic capsule,
hardened steel mesh grill, heavy duty momentary
Push-To-Talk switch and corrosion resistant body,
the AMDFM is suitable for all commercial paging
applications.
The AMDFM is recommended for commercial paging
applications such as dispatch paging, fire panel paging,
industrial paging and many other applications requiring a
heavy duty noise cancelling paging microphone solution.
Features:
Included Accessories
• Tailored for voice paging
• 1 x AMDFM microphone
• Noise cancelling design
• 1 x AMDFM hanging clip
• Momentary Push-To-Talk switch
• Dry contact closure trigger
• Industrial grade housing and
capsule
Specifications
Transducer Type
Noise Cancelling Dynamic
Polar Pattern
Omni
Frequency Response
100Hz – 5Khz
Sensitivity
0.5 mV/Pa -66 dBV
Electrical Impedance
200 Ω
Min. Load Impedance
1000 Ω
Max. SPL
145dB @ 1% THD
Finish
Black
Cable
6.0 mm Unterminated 5 core 3.4 meters
Audio Connection
White = Audio Positive + Switch Connection
|
(Normally Open)
Black = Audio Negative – Red = Switch | Green = Switch
Dimensions
67 x 94 x 50 mm
Net Weight
250g
Included Accessories
Hanging Clip
74.5mm
94mm
67.0mm
DIMENSIONS
TYPICAL POLAR PATTERNS
1CM
Ø6.0mm
(cable)
60 CM
31.0mm
TYPICAL FREQUENCY RESPONSE
ENGINEERED BY AUSTRALIAN MONITOR
Address: 1 Clyde Street, Silverwater NSW 2128 Australia.
Website: www.australianmonitor.com.au
International enquiries email: customersupport@australianmonitor.com.au
ABN 35 007 573 417
Rev 1.0
Drain = Ground
Download PDF
Similar pages