ElectroPocket ®
WireManagement™
Expanding on the MechoSystems
line of accessories is ElectroPocket,
which provides a raceway and
optional accessory clips to
manage wires and components for
ElectroShades® including cables,
splitters, and the MechoNet™
Wireless Controller. It secures
these parts safely away from the
moving parts of the shade, reducing
maintenance and improving safety
while offering clean sight lines and
uninhibited operation.
ElectroPocket 4155 with tile support (4156 = no tile support)
5-3/4 in. (146 mm)
6-1/4 in.
(159 mm)
Features
•Two sizes, with or without the
option of tile support.
Max R.U.D.
4-1/4 in. (108 mm)
•Includes wiring raceways.
•Nests for shipping, reducing
transportation costs.
Drawing shows 3 in. (76 mm) closure.
•Easily clips together onsite.
• ElectroPockets and 4-in. closure
come in 126-in. (3,200-mm)
lengths to decrease shipping
costs and fit in standard freight
elevators.
ElectroPocket 4165 with tile support (4166 = no tile support)
•Features modular design, which
allows for changes onsite
depending on requirements.
6-5/8 in. (168 mm)
•Guides for easy bracket
placement, shade installation,
programming, and servicing.
Models 4155 and 4156 support:
•Electro®/1, Electro/2 DC, Electro/3,
and Electro/3 Extended bracket
systems.
6-1/4 in.
(159 mm)
•Optional 2-, 3-, and 4-in. (50-, 76-,
and 101-mm) closure mounts.*
Models 4165 and 4166 support:
•Electro/1, Electro/2 DC, Electro/3,
Electro/3 Extended, and Electro/SL
bracket systems.
•Optional 2-, 3-, 4-, and 5-in. (50-,
76-, 101-, and 127-mm) closure
mounts.*
Max R.U.D.
4-5/8 in. (114 mm)
Drawing shows 4 in. (102 mm) closure.
low voltage
line voltage
*The 2-, 3-, and 5-in. closures are only available in
15-ft. lengths.
Over
ElectroPocket ®
WireManagement™
ElectroPocket WireManagement
Raceway
accessory
holder
Anderson or Wago
power plug
Raceway
power plug
holder
low voltage
line voltage
Raceway
cable clip
MechoNet
Wireless
Controller
Raceway
clip nut
IQ2® Dual
Splitter
Motor
ElectroPocket components
Pocket connecting clip
Wire conduit clip
Raceway cable clip
Raceway Accessory Holder
Raceway power plug holder
Part no. POCL-0002-AL-ML
Part no. POCW-0144-AL-ML
Part no. POCC-CLIP-ST-ZP
Part no. POCM-BRKT-ST-ZP
Part no. POCN-5515-AS-WH
Raceway clip nut
Straight joint
Outer corner
Inner corner
Part no. POCC-NT08-ST-ZP
Part no. POCX-CJNT-ST-ZP
Part no. POCO-CJNT-ST-ZP
Part no. POCI-CJNT-ST-ZP
Nests for shipping,
reducing cost.
Easily clips
together on-site.
MechoSystems
Corporate Headquarters
42-03 35th Street
Long Island City, NY 11101
T: +1 (718) 729-2020
F: +1 (718) 729-2941
E: info@mechosystems.com
W: mechosystems.com
@mechosystems
© 2018 MechoShade Systems, Inc. (DBA MechoSystems). All product names followed by “®” or “TM,” whether mentioned here or elsewhere, unless otherwise noted,
CUT032.013118
are the exclusive property of MechoShade Systems, Inc. No part of this document may be reproduced without the sole permission of MechoShade Systems, Inc.
Download PDF
Similar pages