405-2014_QuarkCatalogTempNew 8/15/14 11:26 AM Page 405
4
Timers and Counters
Model 655 Digital Timer
Stock
No.
Mfr.’s
Type
Memory
Relay Output Types
Instant.
Timed
Oper.
Voltage Term.
Dim. In.
(H × W × D)
EACH
70225569 A655-8-1000 EEPROM
2 NO, 2 NC 2 NO, 2 NC 120 VAC Screw 4.15 × 3.76 × 5.43 261.13
70225570 A655-8-3000 Lithium Battery 2 NO, 2 NC 2 NO, 2 NC 120 VAC Screw 4.15 × 3.76 × 5.43 229.50
Heavy-Duty 7 A @ 120 VAC Output Relays DPDT
Instantaneous Relay and DPDT Delayed Relay
Easy-to-Adjust Three Rotary Switches
UL Approved
Stock
No.
Mfr.’s
Type
Dim. In.
(H × W × D)
EACH
70225634
365C300Q30PX
2.83 × 2.83 × 5.31
234.30
Mfr.’s
Type
Mode
EACH
70225613
70225609
70225614
70230156
70228158
405C100F1X
405C100F2X
407C100F3X
405AR100S2X*
422AR100S0X*
On-Delay with Instantaneous Relay
On-Delay/Interval
On-Delay/Off-Delay/Interval
On-Delay/Interval
Multi-Range, Repeat Cycle
131.28
142.88
113.46
47.47
48.20
*Universal power supply 12-240 VDC and 20-240 VAC.
Features:
Contact Bounce and Noise Immunity
Computation
Programmable Display
Wide Range
Compact, Plug-In and Dust-Tight
Repeatable Reset Time and Pulse Length
Reliable and Rugged
UL Recognized
Stock
No.
Mfr.’s
Type
Dim. In.
(H × W × D)
EACH
70225635
366C400Q30PX
2.83 × 2.83 × 5.31
287.48
OPTOELECTRONICS
7DT-2CH 7-Day Timer
354 Shawnee Speed Counter
175MU
175SO-110
Noise Immunity
Plug-In and Dust-Tight
Specifications:
Contacts-2-SPDT, Rated @ 16 A AC,
Supply Voltage — AC/DC 12-240 V
(AC 50-60 Hz) Rated IP20
INDEX
Features:
4-Digit Display
Easy-to-Set
Features:
Daily, Weekly Program in One Device
2-Independent Channels of Control
Automatic Conversion Summer/Winter
2-Outputs, DIN Rail Mounted
High Accuracy Timing, Due to Special Calibration
Easy Programming via 4-Function Keys
Clear LCD Display, Min. Interval 1 Sec
ASSEMBLY
7DT-2CH
The ATC 7DT-2CH DIN Rail Timer is ideally suited for timing applications needing a daily or weekly schedule. The clear LCD
display provides visible indication of output, mode, day and time. With two independent channels and 16A contacts, the
powerful 7DT-2CH delivers high accuracy in a convenient DIN Rail mounting package.
The solid state 354 is manufactured from a series of computer-tested plug-in circuit boards and assembled virtually without
hand wiring. Because it has no moving parts in its logic circuits, its life expectancy is practically unlimited. Even the load relay,
the 354 only significant mechanical component, has a life expectancy of 100,000,000 operations (no load), while the optional
solid-state switch module has a virtually unlimited life expectancy. As a result, the 354 achieves an overall reliability that
surpasses even the high level achieved by previous Shawnee counters.
PASSIVE & ACTIVE
Stock
No.
The compact ATC 366 is the most reliable and cost-effective counter ATC has ever built. It is easily configured to count to
or down from the setpoint and stop or continue counting after count-out. A built-in diagnostic program confirms proper
operation without the need for test instruments. The 366 counts AC input pulses at speeds up to 1000/minute with
100% repeat accuracy throughout the overall range of 1 to 99,000 counts, even in severe electrical noise conditions.
TEST & MEASUREMENTS
Output Contacts Rated 10 A 120/240 VAC and 30 VDC
Selectable On-Delay/Off-Delay/Interval Timing
Modes (407)
INTERCONNECT
366 Long-Ranger Counter
Series 400 1/16 DIN Plug-In Timers
Features:
Timing Ranges: 1 and 10 Sec, Min., Hours
Universal Power Supply: 24-240 VAC and 24 VDC
48 mm (1/16 DIN) Standard Housing
Features:
72 mm2 Plug-In Housing
NEMA 12 Sealed Front Panel
High Brightness VF Display
Timeup or Timedown from Preset
Nine Selectable Timing Ranges: 0.01 to 9.99, 99.90,
999 Sec, Min. Hrs.
POWER
Specifications:
Timing Modes: On-Delay, Reverse Start Delay
Timing from 0.001 Seconds to 199 Hours, 59 Minutes
Relay Outputs: 7 Amp Resistive, 240 VAC
Display: 41/2-Digit LCD, 7/16" High
Operating Temperature: 0°C to +60°C
Mounting Hole: 3.19" Dia.
UL Recognized
Features:
Data Retention with EEPROM Memory or Battery
Two Timing Modes
Five-Time Ranges
Simple Keypad Time Setting
Sealed NEMA 12 Faceplate
Keypad Lockout of Time Setting
The microprocessor-based Long-Ranger is the most versatile and reliable timer that ATC has ever built. It is adjustable
between 0.01 sec and 999 hours, with a repeat accuracy of ±0.10 sec. Long regarded as the industry standard digital timer,
the 365C delivers unsurpassed performance for noise immunity and reliable operation.
ENCLOSURES
The ATC Model 655 Electronic Timer was designed as an affordable replacement for most round case electro-mechanical
timers. Available with both On-Delay or Reverse Start Delay timing modes, the time setting is entered through the front
NEMA 12 keypad. Both instantaneous and timed contacts are provided.
TIME DELAY &
CONTROL RELAYS
365C Long-Ranger Timer
Stock
No.
Mfr.’s
Type
Description
EACH
Stock
No.
Mfr.’s
Type
Description
EACH
70225643
70225576
70225648
354C350Q30PX
0353-260-27-00
0305-265-61-70
Solid State DC Pulse Counter
Surface Mount Assembly
Retro Fit Kit
511.41
72.09
35.87
70225649
70313926
70349423
7DT-2CH
175MU
175SO-110
2-Channel 7-Day Timer with LCD Display
Multi-Function Timer, Universal Supply Voltage
Single-Function On-Delay Timer
101.75
68.32
39.00
TIME DELAY & CONTROL RELAYS 405
4
Download PDF
Similar pages