SA-TBA Tile Bridge for Ceiling Speakers

Designed, Manufactured and Supported in the USA
VIKING PRODUCT MANUAL
COMMUNICATION & SECURITY SOLUTIONS
SA-TBA
Tile Bridge
March 31, 2017
Tile Bridge for Ceiling Speakers
The SA-TBA is a tile bridge designed to mount 8 inch loud speaker and bridges
both 2 ft x 2 ft and 2 ft x 4 ft ceiling tiles. It is compatible with the Viking models SA1S, 30AE, 35AE, 40AE, 40-IP and 40TB-IP ceiling speakers. The SA-TBA tile
bridge is constructed of 24 gauge cold rolled steel with an electro galvanized rustresistant finish.
Features
Applications
• Fits standard 8 inch ceiling speakers
• When light duty ceiling tiles need help
supporting a ceiling speaker
• Bridges both 2 ft x 2 ft and 2 ft x 4 ft
ceiling tiles
• Clearance holes for easy installation
• 24 gauge galvanized steel
Specifications
www.vikingelectronics.com
Information: (715) 386-8861
Dimensions: 14.5” x 23.75” (368mm x 603mm)
Shipping weight: 1.1 lbs (0.5 kg)
Material: 24 gauge CRS
Finish: Rust-resistant electro galvanized
Mounting Hole: 9.69” Diameter
Installation
Model SA-TBA Tile Bridge *
8-32 Screws
included with
30AE & 35AE
2 x 2 fft or 2 x 4 ft
f C
Ceiling Tile with 8" S
Speaker ((not includ
included)
* CAUTION: Sharp Edges!
Compatible Products
Cost Effective Ceiling Speakers for Indoor Use
30AE
DOD# 498
35AE
DOD# 498
40AE
DOD# 498
40-IP
DOD# 503
40TB-IP
DOD# 502
The 25AE, 30AE, 35AE, and 40AE paging speakers provide additional economical
paging coverage to existing Viking paging units (PA-2A, PA-15, PA-30, PA-60, HF-3W,
M2W) or to any system with an 8 ohm output.
In outdoor, factory or warehouse environments, 25AE or 300AE paging horns are the
best method of producing understandable sound. In these environments the directional
design allows the installer to focus the sound cone down aisles and toward work areas.
In office and restaurant environments, it is best to distribute sound more evenly. Ceiling
mounted 30AE, 35AE, 40AE, 40-IP and 40TB-IP speakers in close proximity offer the
best distribution and are cost effective. The 35AE speakers include a volume control.
40-IP and 40TB-IP are used in SIP and Multicast applications.
25AE Paging Horn Features:
• Adjustable base for easy mounting and directional adjustment
• Compact design for discreet mounting
30AE/35AE Ceiling Speaker Features:
• Metal white grill for flush mounting in
office ceilings
• Mounting hardware included
• Excellent frequency response
• The 35AE includes a volume control
40AE Ceiling Speaker Features:
• Attractive with a modern look
• Flush mounts into a 9.5” to 10” diameter hole
• Integral mounting system
• Excellent sound quality
40-IP Ceiling Speaker Features:
• Use in SIP and Multicast applications
• Attractive with a modern look
• Flush mounts into a 9.5” to 10” diameter hole
• Integral mounting system
• Excellent sound quality
40TB-IP Ceiling Speaker Features:
• Talk back speaker used in SIP and Multicast applications
• Attractive with a modern look
• Flush mounts into a 9.5” to 10” diameter hole
• Integral mounting system
• Excellent sound quality
Warranty
IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, CONTACT: VIKING TECHNICAL SUPPORT AT (715) 386-8666
Our Technical Support Department is available for assistance Monday 8am - 4pm and Tuesday through Friday 8am - 5pm central time. So that we can give you better service, before you call please:
1. Know the model number, the serial number and what software version you have (see serial label).
2. Have your Technical Practice in front of you.
3. It is best if you are on site.
RETURNING PRODUCT FOR REPAIR
The following procedure is for equipment that needs repair:
1. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA) number. The customer MUST have a complete description of the problem, with all pertinent information regarding the defect, such as options set, conditions, symptoms, methods to duplicate problem, frequency of failure, etc.
2. Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. Static sensitive equipment such as a circuit board
should be in an anti-static bag, sandwiched between foam and individually boxed. All equipment should be wrapped to avoid packing material lodging in or sticking
to the equipment. Include ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid to: Viking Electronics, 1531
Industrial Street, Hudson, WI 54016
3. Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO Box.
4. RA number on carton: In large printing, write the R.A. number on the outside of each carton being returned.
RETURNING PRODUCT FOR EXCHANGE
The following procedure is for equipment that has failed out-of-box (within 10 days of purchase):
1. Customer must contact Viking’s Technical Support at 715-386-8666 to determine possible causes for the problem. The customer MUST be able to step through
recommended tests for diagnosis.
2. If the Technical Support Product Specialist determines that the equipment is defective based on the customer's input and troubleshooting, a Return Authorization
(R.A.) number will be issued. This number is valid for fourteen (14) calendar days from the date of issue.
3. After obtaining the R.A. number, return the approved equipment to your distributor, referencing the R.A. number. Your distributor will then replace the product over
Viking using the same R.A. number.
4. The distributor will NOT exchange this product without first obtaining the R.A. number from you. If you haven't followed the steps listed in 1, 2 and 3,
be aware that you will have to pay a restocking charge.
TWO YEAR LIMITED WARRANTY
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of purchase
from any authorized Viking distributor. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics,
Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.)
number.
This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by
use of the product by the purchaser or others. This warranty does not cover non-EWP products that have been exposed to wet or corrosive environments. This warranty
does not cover stainless steel surfaces that have not been properly maintained.
NO OTHER WARRANTIES. VIKING MAKES NO WARRANTIES RELATING TO ITS PRODUCTS OTHER THAN AS DESCRIBED ABOVE AND DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
EXCLUSION OF CONSEQUENTIAL DAMAGES. VIKING SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO PURCHASER, OR ANY OTHER PARTY,
FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES ARISING OUT OF OR RELATED TO THE SALE OR USE OF THE PRODUCT SOLD
HEREUNDER.
EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY. WHETHER IN AN ACTION BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY)
OR ANY OTHER LEGAL THEORY, ANY LIABILITY OF VIKING SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, OR AT VIKING'S OPTION,
REFUND OF THE PURCHASE PRICE AS THE EXCLUSIVE REMEDY AND ANY LIABILITY OF VIKING SHALL BE SO LIMITED.
IT IS EXPRESSLY UNDERSTOOD AND AGREED THAT EACH AND EVERY PROVISION OF THIS AGREEMENT WHICH PROVIDES FOR DISCLAIMER OF WARRANTIES, EXCLUSION OF CONSEQUENTIAL DAMAGES, AND EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY, ARE SEVERABLE FROM ANY OTHER PROVISION AND EACH PROVISION IS A SEPARABLE AND INDEPENDENT ELEMENT OF RISK ALLOCATION AND IS INTENDED TO BE ENFORCED AS SUCH.
Product Support: (715) 386-8666
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking
Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.
DOD# 534
Printed in the U.S.A.
ZF303470 Rev B
Download PDF
Similar pages