IPS LED MONITOR (LED MONITOR*)

Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read this manual carefully before operating
your set and retain it for future reference.
IPS LED MONITOR MODEL
22MP68VQ
23MP68VQ
24MP68VQ
27MP68VQ
www.lg.com
2
ENGLISH
CONTENTS
LICENSE-----------------------------
3
ASSEMBLING AND PREPARING--
4
--Unpacking----------------------------------------Supported Drivers and Software----------------Parts and buttons-------------------------------Moving and Lifting the Monitor-----------------Setting up the Monitor set --------------------
USING THE MONITOR SET-------
4
5
6
8
9
14
--Connecting to a PC---------------------------- 14
--Connecting to AV Devices--------------------- 15
--Connecting to External Devices--------------- 16
CUSTOMIZING SETTINGS-------
17
--Customizing settings-------------------------- 18
Menu Settings
-Quick Settings
-Picture
-General
-Auto Configuration
-Reset
TROUBLESHOOTING-------------
25
‌SPECIFICATIONS-----------------
27
--Preset Modes (Resolution)-------------------- 31
--Indicator---------------------------------------- 31
3
ENG
ENGLISH
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
The following content is only applied to the monitor which is sold in Europe market and which needs to
meet the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no
adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4
ASSEMBLING AND PREPARING
ENGLISH
ENG
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
D-SUB Cable
CD(Owner's Manual) / ( This cable is not included in all
Card
countries. )
DVI-D Cable
( This cable is not included in all
countries. )
or
Power Cord
AC-DC Adapter
( Depending on the country )
Stand Body
CAUTION
Stand Base
AC-DC Adapter
( Depending on the country )
Cable Holder
HDMI Cable
( This cable is not
included in all countries. )
22MP67HQ 23MP67HQ 24MP67HQ 27MP67HQ
22MP67HQ 23MP67HQ 24MP67HQ 27MP67HQ
22MP67VQ 23MP67VQ 24MP67VQ 27MP67VQ
22MP67VQ 23MP67VQ 24MP67VQ 27MP67VQ
Do not use any unapproved accessories to ensure the safety and product life span.
yy
Any damages or injuries by using unapproved accessories are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
5
Supported Drivers and Software
Drivers and Software
Installation Priority
22MP68VQ , 23MP68VQ
24MP68VQ , 27MP68VQ
Monitor Driver
Recommended
O
OnScreen Control
Recommended
O
Required and Recommended: You can download and install the latest version from the enclosed CD
yy
or from the LGE website (www.lg.com) .
ENG
ENGLISH
Check the drivers and software supported by your product and refer to the manuals on the CD enclosed in
the product package.
6
Parts and buttons
ENGLISH
ENG
Joystick Button/
Power Indicator
yyOn : power is on
yyOff : power is off
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with
your finger.
Basic Functions
◄/►
Power on
Press the joystick button once with your finger to turn on the
monitor.
Power off
Press and hold the joystick button once with your finger to turn off
the monitor.
Volume
Control
You can control the volume by moving the joystick button left/right.
NOTE
The joystick button is located at the bottom of the monitor.
yy
7
Parts and buttons
ENG
ENGLISH
Input Connector
8
Moving and Lifting the Monitor
ENGLISH
ENG
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe transportation regardless of its shape or size.
It is advisable to place the monitor in the
yy
original box or packing material before attempting to move it.
Before moving or lifting the monitor, disconyy
nect the power cord and all cables.
Hold the top and bottom of the monitor frame
yy
firmly. Do not hold the panel itself.
CAUTION
As far as possible, avoid touching the moniyy
tor screen. This may result in damage to the
screen or some of the pixels used to create
images.
If you use the monitor panel without the
yy
stand base, its joystick button may cause
the monitor to become unstable and fall,
resulting in damage to the monitor or human
injury. In addition, this may cause the joystick
button to malfunction.
When holding the monitor, the screen should
yy
face away from you to prevent it being
scratched.
When moving the monitor, avoid any strong
yy
shock or vibrations to the product.
When moving the monitor, keep it upright,
yy
never turn the monitor on its side or tilt it
sideways.
9
Setting up the Monitor set
Detaching the Stand Base
1
1
ENG
ENGLISH
Attaching the Stand Base
Stand Body
Stand Base
1
1
Stand Body
CAUTION
1
2
To protect the screen from scratches, cover
yy
the surface with a soft cloth.
Stand Base
2
2
3
Stand Body
3
3
Stand Base
3
3
3
* If it is difficult to remove,
you can push the
Latch with a small flat-head screw driver or a
flat-headed tool and disassemble as shown
below.
10
CAUTION
ENGLISH
ENG
Illustrations in this document represent typical
yy
procedures, so they may look different from
the actual product.
Do not carry the monitor upside down by just
yy
holding the stand base. This may cause the
monitor to fall off the stand and could result in
personal injury.
When lifting or moving the monitor, do not
yy
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
If you use the monitor panel without the stand
yy
base, its joystick button may cause the monitor to become unstable and fall, resulting in
damage to the monitor or human injury. In
addition, this may cause the joystick button to
malfunction.
Mounting on a table
1 Lift and tilt the Monitor set into its upright
position on a table.
Leave a (4 inches) space from the wall for
proper ventilation.
(4 inches)
(4 inches)
(4 inches)
(4 inches)
2 Connect the AC-DC Adapter and Power Cord
to a wall outlet.
or
11
3 Press the joystick button on the bottom of the
CAUTION
WARNING
When you adjust the angle, do not hold the
bottom of the Monitor set frame as shown on
the following illustration, as may injure your
fingers.
Unplug the power cord before moving the
Monitor to another location. Otherwise electric
shock may occur.
Using the cable holder
Do not touch or press the screen when
adjusting the angle of the monitor.
Do not hold this set like below picture.Monitor
screen can detach from stand base and injure
your body.
Cable holder
NOTE
Tilt from +15 to -2 degrees up or down to adjust
the angle of the Monitor set to suit your view.
Front
Rear
ENG
ENGLISH
monitor to turn on the monitor.
12
Using the Kensington security system
ENGLISH
ENG
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the Monitor set and a table.
NOTE
The Kensington security system is optional.
You can obtain it from most electronics stores.
13
Wall Mount (A x B)
yy
Installing to a wall
A
(4 inches)
(4 inches)
(4 inches)
(4 inches)
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely
fixed to the monitor and to the wall.
1 If you use screw longer than standard, the monitor might be damaged internally.
2 If you use improper screw, the product might be
damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
Model
Wall Mount (A x
B)
Standard screw
Number of
screws
Wall Mount Plate
(Optional)
22MP68VQ
23MP68VQ
24MP68VQ
27MP68VQ
75 x 75
CAUTION
Unplug the power cord before moving or inyy
stalling the monitor to avoid electric shocks.
Installing the monitor on the ceiling or on a
yy
slanted wall may result in the monitor falling
off, which could lead to injury. Please use
the genuine LG wall mounting bracket. For
more information, contact your local retail
store or a qualified installer.
Applying excessive force when fastening
yy
screws may cause damage to the monitor. Damage caused in this way will not be
covered by the product warranty.
Use the wall mounting bracket and screws
yy
that conform to the VESA standard. Damage caused by the use or misuse of inappropriate components will not be covered
by the product warranty.
Screw length from outer surface of back
yy
cover should be under 8mm.
Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw:
Max.8mm
100 x 100
M4 x L10
4
LSW140B
B
ENG
ENGLISH
Install the monitor at least (4 inches) away from the
wall and leave about (4 inches) of space at each
side of the monitor to ensure sufficient ventilation.
Detailed installation instructions can be obtained
from your local retail store. Please refer to the
manual to install and set up a tilting wall mounting
bracket.
NOTE
Use the screws specified by the VESA stanyy
dard.
The wall mount kit includes the installation
yy
guide and all necessary parts.
The wall mounting bracket is optional. The
yy
accessories can be purchased at your local
retail store.
The length of the screw may differ for each
yy
wall mounting bracket. Ensure the correct
length screw is used.
For more information, please refer to the
yy
user manual for the wall mounting bracket.
14
USING THE MONITOR SET
ENGLISH
Connecting to a PC
Your Monitor set supports Plug & Play*.
yy
*Plug & Play: A PC recognizes a connected
device that users connect to a PC and turn
on, without device configuration or user
intervention.
DVI-D connection
Transmits a digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with a DVI cable as shown in the following
illustrations.
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
HDMI connection
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in
the following illustrations.
NOTE
When using a D-Sub signal input cable
yy
connector for Macintosh
NOTE
Mac adapter
yy
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin
high density (3 row) D-SUB VGA connector
on the supplied cable to a 15 pin 2 row
connector.
If you use HDMI PC, it can cause compatibility
yy
problem.
Use a certified cable with the HDMI logo
yy
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
15
CAUTION
HDMI connection
Transmits the digital video and audio signals from
your AV devices to the monitor. Connect your AV
device to the monitor with the HDMI cable as illustrated below.
NOTE
When you want to use two PC in our Monitor,
yy
please connect the signal cable(D-SUB/
DVI-D/HDMI) respectively in Monitor set.
If you turn the Monitor set on while it is cold,
yy
the screen may flicker. This is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
NOTE
If you use HDMI PC, it can cause compatibility
yy
problem.
Use a certified cable with the HDMI logo
yy
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
ENG
ENGLISH
Connect the signal input cable
yy
and tighten it by turning the
screws clockwise.
Do not press the screen with
yy
your finger for a long time as this may
result in temporary distortion on the screen.
Avoid displaying a fixed image on the
yy
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
Connecting to AV Devices
16
Connecting to External Devices
ENGLISH
Peripheral device connection
Connect peripheral devices to the monitor using
headphone ports.
(sold separately)
NOTE
Peripheral devices are sold separately.
yy
Cables with angled plugs may have clearyy
ance issues, use straight plugs when possible.
Angle Type
Straight Type
NOTE
Headphones or speakers may not work noryy
mally, depending on the server PC settings.
17
CUSTOMIZING SETTINGS
ENG
ENGLISH
Activating the Main Menu
1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down (▲/▼) and left/right (◄/►) to set the options.
3 Press the joystick button once more to exit the main menu.
Joystick Button
Button
Menu Status
Description
Main menu disabled
Enables the main menu.
Main menu enabled
Exits the main menu.
(Holding down the button to turn off the monitor. You can turn off the monitor
this way at any time, including when the OSD is on.)
◄
►
▲
▼
Main menu disabled
Adjusts the monitor volume level.
Main menu enabled
Enters the menu features.
Main menu disabled
Adjusts the monitor volume level.
Main menu enabled
Enters the input feature.
Main menu disabled
Enables the main menu.
Main menu enabled
Enters the Picture Mode feature.
Main menu disabled
Enables the main menu.
Main menu enabled
Turns off the monitor.
Main Menu Features
Picture Mode
Picture Mode
Main Menu
Description
Menu
Configures the screen settings.
Picture Mode
Select picture mode to achieve the best display effect.
PicturePicture
Mode Mode
Input
You can operate the change of input sig­nals.
• When two input signals over are con­nected and select the
input menu, input signal (D-SUB/DVI-D/HDMI) will be changed
sequentially.
• When only one signal is connected, it is automatically detected. The
default setting is D-SUB.
Monitor off
Turns off the monitor.
Exit
Exits the main menu.
Picture Mode
18
Customizing settings
ENGLISH
ENG
Menu Settings
-Quick Settings
1 To view the OSD menu, press the joystick button at
2
3
4
5
the
bottom of the monitor and then enter the Menu.
Go to Quick Settings > Brightness by moving the
joystick.
Configure
the options following the instructions that
appear in the bottom right corner.
To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > Quick Settings
Brightness
Contrast
Volume
Description
Adjusts the color contrast and brightness of the screen.
Adjusts the volume.
NOTE
You can adjust Mute/ Unmute by moving the joystick button
yy
to ▼ in the Volume menu.
Ratio
Adjusts the screen ratio.
SMART ENERGY
SAVING
Wide
Displays the video in wide-screen, regardless of the video signal input.
Original
Displays a video according to the input video signal aspect ratio.
High
Enables SMART ENERGY SAVING you can save energy with this energyhigh efficient function.
Low
Enables SMART ENERGY SAVING you can save energy with this energylow efficient function.
Off
Disables SMART ENERGY SAVING .
* SMART ENERGY SAVING : Conserve energy by using luminance compensation algorithm.
NOTE
The display may look the same for Wide, Original options at the recommended resolution (1920 x
yy
1080).
The ratio is disabled in the interlaced signal.
yy
NOTE
Saving Data depends on the Panel. So,those values should be different from each panel and panel
yy
vendor. If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or
lower depend on source.
19
-Picture
ENG
ENGLISH
1 To view the OSD menu, press the joystick button at
the bottom of the monitor and then enter the Menu.
Go to Picture by moving the joystick.
2
3 Configure the options following the instructions that
appear in the bottom right corner.
4 To return to the upper menu or set other menu items,
5
move the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > Picture
Picture Mode
Description
Custom
Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Reader 1
It is a mode that the screen is adjusted to the best for the newspaper. If you want
screen more bright, you can control brightness in Menu OSD.
Reader 2
It is a mode that the screen is adjusted to the best for the cartoon. If you want screen
more bright, you can control brightness in Menu OSD.
Photo
Optimizes the screen to view photos.
Cinema
Optimizes the screen to improve the visual effects of a video.
This mode is for users who cannot distinguish between red and green. It enables usColor
Weakness ers with color weakness to easily distinguish between the two colors.
Game
Optimizes the screen for gameplay.
NOTE
This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen,
yy
please turn off this function.
This function can’t distinguish some colors in some images.
yy
20
Picture Adjust
SUPER RESOLUTION+
ENGLISH
ENG
High
Optimized picture quality is displayed when a user wants
crystal clear images. It is effective forhigh quality video
or game.
Middle
The optimized picture quality is displayed when a user
wants images between low and highmodes for comfortable viewing. It is effective for UCC or SD video.
Low
The optimized picture quality is displayed when a user
wants smooth and natural images. It iseffective for slowmoving pictures or still images.
Off
Select this option for everyday viewing. SUPER RESOLUTION+ is turned off in this mode.
Sharpness
Adjusts the sharpness of the screen.
Black Level
Sets the offset level (for HDMI only).
yy Offset: as a reference for a video signal, this is the darkest color
the monitor can display.
Response Time
High
Keeps the current contrast ratio of the screen.
Low
Lowers the black levels and raises the white levels from
the current contrast ratio of the screen.
Sets a response time for displayed pictures based on the speed of the
screen. For a normal environment, it is recommended that you use
Normal. For a fast-moving picture, it is recommended that you use
High.
Setting to High may cause image sticking.
High
Sets the response time to High.
Middle
Sets the response time to Middle.
Low
Sets the response time to Low.
Off
Sets the response time to Off.
Overscan
On
To select the range of output image for DTV timing in
HDMI input, (only for HDMI input). Recommend overscan function to turn on when connect AV equipment.
Off
Disables the Overscan feature.
DFC
On
Adjusts the brightness automatically according to the
screen.
Off
Disables the DFC feature.
Black Stabilizer
Black Stabilizer
: You can control the black contrast to have better visibility in dark
scenes.
Increasing the Black Stabilizer value brightens the low gray level
area on the screen. (You can easily distinguish objects on dark game
screens.)
Reducing the Black Stabilizer value darkens the low gray level area
and increases the dynamic contrast on the screen.
FreeSync
Provides seamless and natural images by synchronizing the vertical
frequency of the input signal with that of the output signal.
NOTE
yyTo use the FreeSync feature, a graphic card that supports
FreeSync is necessary.
yySupported Interface: HDMI
yyFor more information, refer to AMD website at http://www.amd.
com/FreeSync
On
FreeSync function on.
Off
FreeSync function off.
21
Color Adjust
The higher the gamma value, the darker the image becomes.
Likewise, the lower the gamma value, the lighter the image becomes.
If you do not need to adjust the gamma settings, select Off.
Color Temp
Selects the factory default picture color.
Warm: Sets the screen color to a reddish tone.
Medium: Sets the screen color between a red and blue tone.
Cool: Sets the screen color to a bluish tone.
Custom
Red
Green
Blue
Six Color
You can customize the picture color using Red,
Green, and Blue colors.
Meets the user requirements for colors through adjusting the color
and saturation of the six colors (Red_Hue, Red_Saturation, Green_
Hue, Green_Saturation, Blue_Hue, Blue_Saturation, Cyan_Hue,
Cyan_Saturation, Magenta_Hue, Magenta_Saturation, Yellow_Hue,
Yellow_Saturation) and saving the settings.
*Hue: Adjusts tone of the screen.
*Saturation: Adjusts the saturation of the screen colors. The lower the
value, less saturated and bright the colors become. The higher the
value, the more saturated and dark the colors become.
Display
Reset
Returns the color settings to the default settings.
Horizontal
To move image left and right.
Vertical
To move image up and down.
Clock
To minimize any vertical bars or stripes visible on the screen
background. The horizontal screen size will also change.
Phase
To adjust the focus of the display. This item allows you to remove any
horizontal noise and clear or sharpen the image of characters.
ENG
ENGLISH
Gamma
22
-General
ENGLISH
ENG
1 To view the OSD menu, press the joystick but-
ton at the bottom of the monitor and then enter the
Menu.
Go to General by moving the joystick.
2
3 Configure the options following the instructions that
appear in the bottom right corner.
4 To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing (
/ OK) it.
5 If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > General
Description
Language
To choose the language in which the control names are displayed.
Power LED
Turns the power indicator on the front side of the monitor on/off.
On
The power indicator is automatically turned on.
Off
The power indicator is turned off.
Automatic Standby
The monitor will automatically switch to standby mode after a certain period.
Resolution
User can set the desired resolution.This option is enabled only when the screen resolution on
your computer is set to the following (D-SUB only).
NOTE
The function is enabled only when the screen resolution on your computer is set to the
following, except that the PC output wrong resolution.
1024x768, 1280x768, 1360x768, 1366x768,Off
1280x960, 1600x900,Off
1440x900, 1600x900,Off
OSD Lock
Prevents incorrect key input.
On
Key input is disabled.
NOTE
All functions except for the OSD Lock mode and the Exit button for Brightness, Contrast, Volume, Input, and General are disabled.
Off
Key input is enabled.
23
-Auto Configuration
Do you want to Auto Confuguration?
the
bottom of the monitor and then enter the Menu.
Go to Auto Configuration by moving the joystick.
2
3 Configure the options following the instructions that
4
5
appear in the bottom right corner.
To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > Auto Configuration
Description
Do you want to Auto Confuguration?
Yes
Operate the Auto configuration for optimal display in D-SUB.
Cancel
Cancel the select.
NOTE
This function will be enable only in analog input.
yy
ENG
ENGLISH
1 To view the OSD menu, press the joystick button at
24
-Reset
ENGLISH
ENG
buttheto joystick
Do you want
Auto Confuguration?
1 To view the OSD menu, press
ton at the bottom of the monitor and then enter the
Menu.
Go
to Reset by moving the joystick.
2
3 Configure the options following the instructions that
4
5
appear in the bottom right corner.
To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > Reset
Description
Do you want to reset your settings?
Reset
Returns to the default settings.
Cancel
Cancel the select.
25
Check the following before calling for service.
No image appears
Is the power cord of the display
connected?
Is the power indicator light on?
Is the power indicator flickering?
Do you see an "Out of Range"
message on the screen?
Do you see a "NO SIGNAL"
message on the screen?
yy Check and see if the power cord is connected properly to the power
outlet.
yy Press the Power button.
yy If the display is in power saving mode, try moving the mouse or
pressing any key on the keyboard to bring up the screen.
yy Try to turn on the PC.
yy This message appears when the signal from the PC (video card) is
out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display
again.
yy After the monitor is on "NO SIGNAL", the monitor goes to DPM mode.
yy This is displayed when the signal cable between the PC and the
monitor is missing or disconnected. Check the cable and reconnect it.
Can 't you control some functions in OSD?
Can't you select some menu in
OSD?
yy You can unlock the OSD controls at any time by entering the OSD
lock menu and changing items to off.
Display image is incorrect
Display Position is incorrect.
On the screen background, vertical
bars or stripes are visible.
Any horizontal noise appearing in
any image or characters are not
clearly portrayed.
yy Enter the Auto Configuration function and select the "Yes" item to
automatically adjust your display image to the ideal setting.
yy Enter the Auto Configuration function and select the "Yes" item to
automatically adjust your display image to the ideal setting.
yy Enter the Auto Configuration function and select the "Yes" item to
automatically adjust your display image to the ideal setting.
yy Check Control Panel ► Display ► Settings and adjust the display
to the recommended resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits (true color).
ENG
ENGLISH
TROUBLESHOOTING
26
CAUTION
ENGLISH
ENG
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were
yy
changed. If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the
yy
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), and resolution mentioned
yy
above may not be supported by the video card performance. In this case, please ask to the computer
or the video card manufacturer.
Display image is incorrect
The screen color is mono or
abnormal.
yy Check if the signal cable is properly connected and use a screwdriver
to fasten if necessary.
yy Make sure the video card is properly inserted in the slot.
yy Set the color setting higher than 24 bits (true color) at Control Panel
► Settings.
The screen blinks.
yy Check if the screen is set to interlace mode and if yes, change it to the
recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display
driver?
yy Be sure to install the display driver from the display driver CD (or
diskette) that comes with your display. Or, you can also download the
driver from our web site: http://www.lg.com.
yy Make sure to check if the video card supports Plug&Play function.
The screen is flickering.
Did you select the recommended
resolution?
yy If the selected resolution is HDMI 1080i 60/50 Hz, the screen may
be flickering. Change the resolution to the recommended resolution
1080P.
27
‌SPECIFICATIONS
Display
Screen Type
TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel
Anti-Glare coating
0.24795 mm x 0.24795 mm (Pixel Pitch)
Pixel Pitch
Sync Input
Horizontal Frequency
Vertical Frequency
Input Form
Video Input
Resolution
Signal Input
30 kHz to 85 kHz (HDMI )(FreeSync on)
30 kHz to 83 kHz (HDMI )(FreeSync off)
30 kHz to 83 kHz (D-SUB)
30 kHz to 83 kHz (DVI)
40 Hz to 75 Hz (HDMI)(FreeSync on)
56 Hz to 75 Hz (HDMI)(FreeSync off)
56 Hz to 75 Hz (D-SUB)
56 Hz to 75 Hz (DVI)
Separate Sync. Digital
Input Form
15 pin D-SUB Connector/DVI-D Connector (Digital)
HDMI Connector
RGB Analog (0.7 Vp-p/ 75 ohm),Digital
Max
1920 x 1080 @ 75 Hz
Recommend
VESA 1920 x 1080 @ 60 Hz
Plug & Play
DDC 2B (Analog,Digital,HDMI)
Power
Consumption
On Mode : 13.7W Typ. (ENERGY STAR® standard) *
17.6 W Typ. (Outgoing condition) **
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
19 V
1.3 A
Power Input
AC-DC Adapter
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSG-19 19025EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type PA-1021-23, manufactured by Lite-On Technology Corporation
OUTPUT: 19 V
1.3 A
Dimensions
(Width x Height x
Depth)
With Stand
Weight
2.8 kg (6.1 lbs)
Environmental
conditions
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Without Stand
Storage Temperature
Storage Humidity
491.2 mm x 387.7 mm x 186.8 mm
(19.3 inches x 15.2 inches x 7.3 inches)
491.2 mm x 293.3 mm x 91.7 mm
(19.3 inches x 11.5 inches x 3.6 inches)
-20 °C to 60 °C (-4 °F to 140 °F)
Less than 85 %
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The On mode power consumption is measured with LGE test standard ( Full White pattern , Maximum
resolution)
ENG
ENGLISH
22MP68VQ
28
‌SPECIFICATIONS
ENGLISH
ENG
23MP68VQ
Display
Screen Type
TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel
Anti-Glare coating
0.2652 mm x 0.2652 mm (Pixel Pitch)
Pixel Pitch
Sync Input
Horizontal Frequency
Vertical Frequency
Input Form
Video Input
Resolution
Signal Input
30 kHz to 85 kHz (HDMI )(FreeSync on)
30 kHz to 83 kHz (HDMI )(FreeSync off)
30 kHz to 83 kHz (D-SUB)
30 kHz to 83 kHz (DVI)
40 Hz to 75 Hz (HDMI)(FreeSync on)
56 Hz to 75 Hz (HDMI)(FreeSync off)
56 Hz to 75 Hz (D-SUB)
56 Hz to 75 Hz (DVI)
Separate Sync. Digital
Input Form
15 pin D-SUB Connector/DVI-D Connector (Digital)
HDMI Connector
RGB Analog (0.7 Vp-p/ 75 ohm),Digital
Max
1920 x 1080 @ 75 Hz
Recommend
VESA 1920 x 1080 @ 60 Hz
Plug & Play
DDC 2B (Analog,Digital,HDMI)
Power
Consumption
On Mode : 13.9 W Typ. (ENERGY STAR® standard) *
19.1 W Typ. (Outgoing condition) **
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
19 V
1.3 A
Power Input
AC-DC Adapter
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSG-19 19025EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type PA-1021-23, manufactured by Lite-On Technology Corporation
OUTPUT: 19 V
1.3 A
Dimensions
(Width x Height x
Depth)
With Stand
Weight
3.1 kg (6.8 lbs)
Environmental
conditions
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Without Stand
Storage Temperature
Storage Humidity
523.9 mm x 406.1 mm x 186.8 mm
(20.6 inches x 15.9 inches x 7.3 inches)
523.9 mm x 311.7 mm x 91.7 mm
(20.6 inches x 12.2 inches x 3.6 inches)
-20 °C to 60 °C (-4 °F to 140 °F)
Less than 85 %
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The On mode power consumption is measured with LGE test standard ( Full White pattern , Maximum
resolution)
29
‌SPECIFICATIONS
Display
Screen Type
TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel
Anti-Glare coating
0.2745 mm x 0.2745 mm (Pixel Pitch)
Pixel Pitch
Sync Input
Horizontal Frequency
Vertical Frequency
Input Form
Video Input
Resolution
Signal Input
30 kHz to 85 kHz (HDMI )(FreeSync on)
30 kHz to 83 kHz (HDMI )(FreeSync off)
30 kHz to 83 kHz (D-SUB)
30 kHz to 83 kHz (DVI)
40 Hz to 75 Hz (HDMI)(FreeSync on)
56 Hz to 75 Hz (HDMI)(FreeSync off)
56 Hz to 75 Hz (D-SUB)
56 Hz to 75 Hz (DVI)
Separate Sync. Digital
Input Form
15 pin D-SUB Connector/DVI-D Connector (Digital)
HDMI Connector
RGB Analog (0.7 Vp-p/ 75 ohm),Digital
Max
1920 x 1080 @ 75 Hz
Recommend
VESA 1920 x 1080 @ 60 Hz
Plug & Play
DDC 2B (Analog,Digital,HDMI)
Power
Consumption
On Mode : 17.1W Typ. (ENERGY STAR® standard) *
21 W Typ. (Outgoing condition) **
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
19 V
1.3 A
Power Input
AC-DC Adapter
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSG-19 19025EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type PA-1021-23, manufactured by Lite-On Technology Corporation
OUTPUT: 19 V
1.3 A
Dimensions
(Width x Height x
Depth)
With Stand
Weight
3.3 kg (7.2 lbs)
Environmental
conditions
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Without Stand
Storage Temperature
Storage Humidity
541.7 mm x 416.2 mm x 186.8 mm
(21.3 inches x 16.3 inches x 7.3 inches)
541.7 mm x 321.8 mm x 91.9 mm
(21.3 inches x 12.6 inches x 3.6 inches)
-20 °C to 60 °C (-4 °F to 140 °F)
Less than 85 %
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The On mode power consumption is measured with LGE test standard ( Full White pattern , Maximum
resolution)
ENG
ENGLISH
24MP68VQ
30
‌SPECIFICATIONS
27MP68VQ
ENGLISH
ENG
Display
Screen Type
TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel
Anti-Glare coating
0.3114 mm x 0.3114 mm (Pixel Pitch)
Pixel Pitch
Sync Input
Horizontal Frequency
Vertical Frequency
Input Form
Video Input
Resolution
Signal Input
30 kHz to 85 kHz (HDMI )(FreeSync on)
30 kHz to 83 kHz (HDMI )(FreeSync off)
30 kHz to 83 kHz (D-SUB)
30 kHz to 83 kHz (DVI)
40 Hz to 75 Hz (HDMI)(FreeSync on)
56 Hz to 75 Hz (HDMI)(FreeSync off)
56 Hz to 75 Hz (D-SUB)
56 Hz to 75 Hz (DVI)
Separate Sync. Digital
Input Form
15 pin D-SUB Connector/DVI-D Connector (Digital)
HDMI Connector
RGB Analog (0.7 Vp-p/ 75 ohm),Digital
Max
1920 x 1080 @ 75 Hz
Recommend
VESA 1920 x 1080 @ 60 Hz
Plug & Play
DDC 2B (Analog,Digital,HDMI)
Power
Consumption
On Mode : 17.6 W Typ. (ENERGY STAR® standard ) *
25.1 W Typ. ( Outgoing condition ) **
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
19 V
1.6 A or 19 V
1.3 A
Power Input
AC-DC Adapter
Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-32FSG-19 19032EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type PA-1031-23, manufactured by Lite-On Technology Corporation
OUTPUT: 19 V
1.7 A
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSG-19 19025EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
OUTPUT: 19 V
1.3 A
Dimensions
(Width x Height x
Depth)
With Stand
Weight
5.0 kg (11.0 lbs)
Environmental
conditions
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Without Stand
Storage Temperature
Storage Humidity
613.8 mm x 457.4 mm x 204.6 mm
(24.1 inches x 18.0 inches x 8.0 inches)
613.8 mm x 363.0 mm x 92.0 mm
(24.1 inches x 14.2 inches x 3.6 inches)
-20 °C to 60 °C (-4 °F to 140 °F)
Less than 85 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition®and monitor setting.
* The On mode power consumption is measured with ENERGY STAR test standard.
** The On mode power consumption is measured with LGE test standard ( Full White pattern , Maximum
resolution)
31
Preset Modes (Resolution)
ENG
ENGLISH
D-SUB/DVI-D/HDMI PC Timing
Display Modes (Resolution)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Polarity(H/V)
720 x 400
31.468
70
-/+
640 x 480
31.469
60
-/-
640 x 480
37.500
75
-/-
800 x 600
37.879
60
+/+
800 x 600
46.875
75
+/+
1024 x 768
48.363
60
-/-
1024 x 768
60.023
75
+/+
1152 x 864
67.500
75
+/+
1280 x 1024
63.981
60
+/+
1280 x 1024
79.976
75
+/+
1680 x 1050
65.290
60
-/+
1920 x 1080
67.500
60
+/+
Recommend Mode
1920 x 1080
83.89
75
+/+
FreeSync on
HDMI Timing(Video)
Factory support mode
(Preset Mode)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
480P
31.50
60
O
576P
31.25
50
O
720P
37.50
50
O
720P
45.00
60
O
1080P
56.25
50
O
1080P
67.50
60
O
Recommend Mode
Indicator
Mode
LED Color
On Mode
White
Sleep Mode
Blinking White
Off Mode
Off
HDMI
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.In
addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available
for download.LG Electronics will also provide open source
code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for three (3)
years from the date on which you purchased the product.
Declaration of Conformity
Trade Name: LG
Model : 22MP68VQ,23MP68VQ,24MP68VQ,27MP68VQ
Responsible Party: LG Electronics Inc.
Address : 1000 Sylvan Ave. Englewood Cliffs
NJ 07632 U.S.A
TEL: 201-266-2534
*above information is only for USA FCC Regulatory
Make sure to read the Safety Precautions before using the product.
Keep the Owner’s Manual (CD) in an accessible place for future
reference.
The model and serial number of the SET is located on the back and
one side of the SET. Record it below should you ever need service.
MODEL
SERIAL
ENERGY STAR® is a set of power-saving guidelines
issued by the U.S.Environmental Protection Agency
(EPA).
As an ENERGY STAR® Partner LGE U. S. A.,
Inc. has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
Refer to ENERGYSTAR.gov for more information on the ENERGY
STAR® program.
Download PDF
Similar pages