RUT240
RUT240 Router
RUT240 is a compact, cost-effective and powerful industrial router for
professional applications. Router delivers high performance for mission-critical
cellular communication. Equiped with external SIM holder and signal strength
status LEDs, it ensures easy network management. External antenna
connectors make it possible to attach desired antennas and to easily find the best
signal location.
■
■
■
■
■
■
■
■
■
■
2 x SMA for LTE
1 x RP-SMA for WiFi
DIN rail mounting (incl. sideways mounting) (optional)
9 - 30 VDC
External SIM holder
1 x WAN
1 x LAN
1 x Input
1 x Output
WiFi and Mobile LED indications
■
■
■
■
■
■
■
■
■
OpenVPN
PPTP
L2TP
IPSec
GRE Tunnel
Bootloader WebUI
SMS Control
WiFi Hotspot
Backup WAN
■
■
■
■
■
■
■
■
■
Ping Reboot
Web Filter
SNMP
Configuration profiles
Dynamic DNS
Periodic Reboot
Mobile Quota Control
NTP
RMS compatibility
RUT240
LTE
■ LTE FDD: B1/B3/B5/B7/B8/B20
■ LTE TDD: B38/B40/B41
■ LTE CAT4 up to 150 Mbps DL
■ LTE CAT4 up to 50 Mbps UL
■ Class 3 (23dBm±2dB) for LTE FDD
■ Class 3 (23dBm±2dB) for LTE TDD
UMTS/DC-HSPA+
■ 850/900/2100 MHz
■ DC-HSPA+ mode: Max 42Mbps (DL) Max 5.76Mbps (UL)
■ UMTS mode: 384 kbps DL, 384 kbps UL
■ TD-SCDMA: Max 4.2Mbps (DL) Max 2.2Mbps (UL)
■ Power Class 3 (24dBm +1/-3dB) for UMTS bands
■ Class 3 (24dBm+1/-3dB) for TD-SCDMA
■ 900/1800 Mhz
■ GPRS/EDGE Multi-slot Class 12
■ Power Class E2 (27dBm ±3dB) for GSM 900
■ Power Class E2 (26dBm +3/-4dB) for DCS 1800
■ Power Class 4 (33dBm ±2dB) for GSM 900
■ Power Class 1 (30dBm ±2dB) for DCS 1800
■
■
■
■
IEEE 802.3, IEEE 802.3u standards
1 x LAN 10/100Mbps Ethernet port
1 x WAN 10/100Mbps Ethernet port
Supports auto MDI/MDIX
■
■
■
■
■
■
IEEE 802.11b/g/n WiFi standards
AP and STA modes
64/128-bit WEP, WPA, WPA2, WPA&WPA2 encryption methods
2.401-2.483 GHz WiFi frequency range*
20dBm max WiFi TX power
SSID stealth mode and access control based on MAC address
■ High performance 400 MHz CPU with 64 Mbytes of DDR2 memory
■ External SIM holder
■ 4 pin DC connector with 1 x Digital input and 1 x Digital output
■ Reset/restore to default button
■ 2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors
■ 2 x Ethernet LEDs, 1 x power LED
■ 5 x signal strength LEDs, 3 x connection type indication LEDs
■ Bottom and sideways DIN rail mounting slits
■ OpenVPN, IPsec, GRE, L2TP, PPTP
■ Firmware update from bootloader via WebUI
■ SMS Control
■ Remote Management System and Teltonika Router App for easy setup, configuration and maintenance.
■ Dimensions
■ Weight
■ Power supply
■ Input voltage range
■ Power consumption
■ Operating temperature
■ Storage temperature
■ Operating humidity
■ Storage humidity
(W x D x H) 83 mm x 74 mm x 25 mm
125 g
100 – 240 VAC -> 9 VDC wall adapter
9 – 30VDC
< 5W
-40 °C to 75 °C
-45 °C to 80 °C
10% to 90% Non-condensing
5% to 95% Non-condensing
*Supported frequency bands are dependent on geographical location and may not be available in all markets.
Teltonika reserves the right to modify the functionality of the device without any prior notice. Document version 4.4 (2017/12/04)
Download PDF
Similar pages