Table of Contents
Cabinet & Rack Solutions
Cabinets
Cabinet & Rack Accessories
Standard Network Cabinets
2
Enhanced Ventilation Network Cabinets
4
Fully Vented Server Cabinets
6
Single Section Wall Mount Cabinets 8
Double SectionWall Mount Cabinets
10
Racks
Steel Relay Racks: 2 Post
12
Steel Relay Racks: 4 Post
14
Steel Relay Racks: Expansion Kit
16
Aluminum Relay Rack Systems
17
865.671.4455
Shelves18
Drawers19
Panels20
Cable Managers21
Casters 23
Adjustable Feet23
2
Cabinets
Standard Network Cabinets/ 42U and 47U
A high quality, feature rich cabinet offered at a competitive price.
Compliance
• ANSI/EIA RS-310D
• IEC60297-2
• DIN41194; Part 1
• DIN41494; Part 7
Construction
• Fully welded, black powder-coated cold rolled steel
Loading Capacity
• High-static load rating up to 2867 lb (1300 kg)
Features and Benefits
• Includes a lockable clear plexiglass front door and a lockable
solid steel rear door.
• Entire cabinet can be fully assembled in less than 30 minutes.
• Includes two pairs of 19” EIA threaded hole mounting rails made
from heavy-duty 14 gauge steel. Rails can be easily repositioned
in 1 cm increments to accommodate various equipment depths.
• Pre-installed recessed casters combine convenient mobility with
minimal added height, ensuring maximum stability.
• Removable half height side panels, doors that hinge on either side,
and 180 degree door swings provide superior access for installation
and maintenance of equipment.
• Adjustable sliding cable entries on the top and bottom panels
provide flexibility in cable management.
• Vertical cable management channel can be adjusted in
1 cm increments.
• Four fan unit provides optimum ventilation.
Ordering Information
RNCN2-68421
PART NUMBER
RU
DEPTH
WIDTH
HEIGHT
RNCN2-68421
42
31.5” (800 mm)
23.625” (600 mm)
79.75” (2025 mm)
RNCN2-68471
47
31.5” (800 mm)
23.625” (600 mm)
88.5” (2248 mm)
RNCN2-60421
42
42” (1067 mm)
23.625” (600 mm)
79.75” (2025 mm)
RNCN2-60471
47
42” (1067 mm)
23.625” (600 mm)
88.5” (2248 mm)
www.vericomsolutions.com
3
Cabinets
Standard Network Cabinets/ 42U and 47U
Technical Specifications
ITEM/ SKU#
RNCN2-68421
RNCN2-68471
RNCN2-60421
RNCN2-60471
42
47
42
47
RACK UNIT QUANTITY
HEIGHT
79.75” (2025 mm)
88.5” (2248 mm)
79.75” (2025 mm)
88.5” (2248 mm)
WIDTH
23.625” (600 mm)
23.625” (600 mm)
23.625” (600 mm)
23.625” (600 mm)
42” (1067 mm)
DEPTH
THROW (OPENED DOOR SIZE)
31.5” (800 mm)
31.5” (800 mm)
42” (1067 mm)
54.75” (1390 mm)
54.75” (1390 mm)
65” (1650 mm)
65” (1650 mm)
282 lb (128 kg)
305 lb (138 kg)
326 lb (148 kg)
353 lb (160 kg)
WEIGHT
STATIC LOADING CAPACITY
2867 lb (1300 kg)
MATERIAL
THICKNESS
14 GAUGE
Rails and bottom connector bars
16 GAUGE
Top connector bars
18 GAUGE
Doors, top panel, side frame
FRONT DOOR
Steel frame with full panel plexiglass window, two-point locking mechanism
and left or right 180 degree swing
REAR DOOR
Solid steel with two-point locking mechanism and left or right 180 degree swing
SIDE PANELS
Removable and lockable half height panels
NUMBERED RU MARKINGS
Yes
HOLE TYPE
10-32 threaded
FAN
(1) top mounted 4-fan unit (280 CFM total)
FILLER PANEL
(1) 2U blank filler panel included
FEET/ CASTERS
(4) pre-installed recessed casters and (4) optional adjustable feet
HARDWARE INCLUDED
(48) 10-32 screws, (48) plastic washers, extra keys, allen wrench and all assembly hardware
Highlights
Four fan unit for
optimum air flow
Lockable doors
for optimal security
VERICOM Network Cabinets are shipped unassembled and flat packed to minimize shipping cost and simplify on-site handling.
865.671.4455
4
Cabinets
Enhanced Ventilation Network Cabinets/ 42U and 47U
All of the same great features of the Standard Network Cabinet,
with added ventilation on both the front and rear doors.
Compliance
• ANSI/EIA RS-310D
• IEC60297-2
• DIN41194; Part 1
• DIN41494; Part 7
Construction
• Fully welded, black powder-coated cold rolled steel
Loading Capacity
• High-static load rating up to 2867 lb (1300 kg)
Features and Benefits
• Includes a lockable clear plexiglass front door with a vented frame,
and a lockable fully vented rear door.
• Entire cabinet can be fully assembled in less than 30 minutes.
• Includes two pairs of 19” EIA threaded hole mounting rails made
from heavy-duty 14 gauge steel. Rails can be easily repositioned
in 1 cm increments to accommodate various equipment depths.
• Pre-installed recessed casters combine convenient mobility with
minimal added height, ensuring maximum stability.
• Removable half height side panels, doors that hinge on either
side, and 180 degree door swings provide superior access for
installation and maintenance of equipment.
• Adjustable sliding cable entries on the top and bottom panels
provide flexibility in cable management.
• Vertical cable management channel can be adjusted in
1 cm increments.
• Four fan unit provides optimum ventilation.
Ordering Information
RNCV2-60421
PART NUMBER
RU
WIDTH
DEPTH
HEIGHT
RNCV2-68421
42
23.625” (600 mm)
31.5” (800 mm)
79.75” (2025 mm)
RNCV2-68471
47
23.625” (600 mm)
31.5” (800 mm)
88.5” (2248 mm)
RNCV2-60421
42
23.625” (600 mm)
42” (1067 mm)
79.75” (2025 mm)
RNCV2-60471
47
23.625” (600 mm)
42” (1067 mm)
88.5” (2248 mm)
www.vericomsolutions.com
5
Cabinets
Enhanced Ventilation Network Cabinets/ 42U and 47U
Technical Specifications
ITEM/ SKU#
RACK UNIT QUANTITY
RNCV2-68421
RNCV2-68471
RNCV2-60421
RNCV2-60471
42
47
42
47
HEIGHT
79.75” (2025 mm)
88.5” (2248 mm)
79.75” (2025 mm)
88.5” (2248 mm)
WIDTH
23.625” (600 mm)
23.625” (600 mm)
23.625” (600 mm)
23.625” (600 mm)
42” (1067 mm)
DEPTH
THROW (OPENED DOOR SIZE)
31.5” (800 mm)
31.5” (800 mm)
42” (1067 mm)
54.75” (1390 mm)
54.75” (1390 mm)
65” (1650 mm)
65” (1650 mm)
277 lb (126 kg)
302 lb (137 kg)
326 lb (148 kg)
347 lb (157 kg)
WEIGHT
STATIC LOADING CAPACITY
2867 lb (1300 kg)
MATERIAL
THICKNESS
14 GAUGE
Rails and bottom connector bars
16 GAUGE
Top connector bars
18 GAUGE
Doors, top panel, side frame
FRONT DOOR
Vented steel frame with full panel plexiglass window, two-point locking mechanism
and left or right 180 degree swing
REAR DOOR
Fully vented steel with two-point locking mechanism and left or right 180 degree swing
SIDE PANELS
Removable and lockable half height panels
NUMBERED RU MARKINGS
Yes
HOLE TYPE
10-32 threaded
FAN
(1) top mounted 4-fan unit (280 CFM total)
FILLER PANEL
(1) 2U blank filler panel included
FEET/ CASTERS
(4) pre-installed recessed casters and (4) optional adjustable feet
HARDWARE INCLUDED
(48) 10-32 screws, (48) plastic washers, extra keys, allen wrench, and all assembly hardware
Highlights
Locking, removable side panels
for easy access to equipment
Four fan unit for
optimum air flow
Lockable doors with
net holes for optimal
ventilation and security
VERICOM Enhanced Ventilation Network Cabinets are shipped unassembled
and flat packed to minimize shipping cost and simplify on-site handling.
865.671.4455
6
Cabinets
Fully Vented Server Cabinets/ 42U and 47U
All of the same great features of the Enhanced Ventilation Network Cabinet,
with premium fully vented front door and a split rear door.
Compliance
• ANSI/EIA RS-310D
• IEC60297-2
• DIN41194; Part 1
• DIN41494; Part 7
Construction
• Fully welded, black powder-coated cold rolled steel
Loading Capacity
• High-static load rating up to 2867 lb (1300 kg)
Features and Benefits
• Includes fully vented front and rear doors.
• Entire cabinet can be fully assembled in less than 30 minutes.
• Includes two pairs of 19” EIA threaded hole mounting rails made
from heavy-duty 14 gauge steel. Rails can be easily repositioned
in 1 cm increments to accommodate various equipment depths.
• Pre-installed recessed casters combine convenient mobility with
minimal added height, ensuring maximum stability.
• Removable half height side panels, doors that hinge on either
side, and 180 degree door swings provide superior access for
installation and maintenance of equipment.
• Adjustable sliding cable entries on the top and bottom panels
provide flexibility in cable management.
• Vertical cable management channel can be adjusted in
1 cm increments.
• Four fan unit provides optimum ventilation.
Ordering Information
RSCV2-60421
PART NUMBER
RU
WIDTH
DEPTH
HEIGHT
RSCV2-60421
42
23.625” (600 mm)
42” (1067 mm)
79.75” (2025 mm)
RSCV2-60471
47
23.625” (600 mm)
42” (1067 mm)
88.5” (2248 mm)
www.vericomsolutions.com
7
Cabinets
Fully Vented Server Cabinets/ 42U and 47U
Technical Specifications
ITEM/ SKU#
RNCV2-68421
RACK UNIT QUANTITY
RNCV2-60421
42
47
HEIGHT
79.75” (2025 mm)
88.5” (2248 mm)
WIDTH
23.625” (600 mm)
23.625” (600 mm)
DEPTH
42” (1067 mm)
42” (1067 mm)
THROW (OPENED DOOR SIZE)
65” (1650 mm)
65” (1650 mm)
320 lb (145 kg)
335 lb (152 kg)
WEIGHT
STATIC LOADING CAPACITY
2867 lb (1300 kg)
MATERIAL
THICKNESS
14 GAUGE
Rails and bottom connector bars
16 GAUGE
Top connector bars
18 GAUGE
Doors, top panel, side frame
FRONT DOOR
Fully vented steel with two-point locking mechanism and left or right 180 degree swing
REAR DOOR
Fully vented steel split doors with two-point locking mechanism and 180 degree swing
SIDE PANELS
Removable and lockable half height panels
NUMBERED RU MARKINGS
Yes
HOLE TYPE
10-32 threaded
FAN
(1) top mounted 4-fan unit (280 CFM total)
FILLER PANEL
(1) 2U blank filler panel included
FEET/ CASTERS
(4) pre-installed recessed casters and (4) optional adjustable feet
HARDWARE INCLUDED
(48) 10-32 screws, (48) plastic washers, extra keys, allen wrench, and all assembly hardware
Highlights
Four fan unit for
optimum air flow
Fully vented, lockable
split rear doors
VERICOM Server Cabinets are shipped unassembled and flat packed to minimize shipping cost and simplify on-site handling.
865.671.4455
8
Cabinets
Single Section Wall Mount Cabinets
Compliance
• ANSI/EIA RS-310D
• IEC60297-2
• DIN41194; Part 1
• DIN41494; Part 7
Construction
• Fully welded, black powder-coated cold rolled steel
Loading Capacity
• Up to 132 lb (60 kg)
Features and Benefits
• 3/4 inch, 1 inch and 2 inch knockouts for pipe fittings or cable entry
• Cable entry on top and bottom
• Lace points reduce cable clutter
• Lockable plexiglass front door
• Removable 12 x 12 back panel
• Removable side panels are hinged to open 90 degrees
• Reversible right or left handed front door with 180 degree swing
• Assembles in 30 minutes or less
RSSN2-56151
Lace points in rear panel
reduce cable clutter
Ordering Information
PART NUMBER
RU
WIDTH
DEPTH
HEIGHT
RSSN2-56091
9
21.25” (540 mm)
23.625” (600 mm)
18” (460 mm)
RSSN2-56121
12
21.25” (540 mm)
23.625” (600 mm)
23.375” (595 mm)
RSSN2-56151
15
21.25” (540 mm)
23.625” (600 mm)
28.5” (725 mm)
www.vericomsolutions.com
9
Cabinets
Single Section Wall Mount Cabinets
Technical Specifications
ITEM/ SKU#
RSSN2-56091
RSSN2-56121
RSSN2-56151
9
12
15
RACK UNIT QUANTITY
HEIGHT
18” (460 mm)
23.375” (595 mm)
28.5” (725 mm)
WIDTH
21.25” (540 mm)
21.25” (540 mm)
21.25” (540 mm)
DEPTH
23.625” (600 mm)
23.625” (600 mm)
23.625” (600 mm)
THROW*
42.25” (1072 mm)
42.25” (1072 mm)
42.25” (1072 mm)
42 lb (19 kg)
46 lb (20.7 kg)
50 lb (22.9 kg)
WEIGHT
STATIC LOADING CAPACITY
132 lb (60 kg)
MATERIAL THICKNESS
16 gauge rails
FRONT DOOR
Lockable steel frame with full panel plexiglass window and left or right 180 degree swing
SIDE PANELS
Hinged and removable
NUMBERED RU MARKINGS
Yes
HOLE TYPE
10-32 threaded
HARDWARE INCLUDED
(48) 10-32 screws, (48) plastic washers, extra keys, allen wrench and all assembly hardware
Highlights
Ventilation helps keep
equipment cool
Interior view of lace
points and vents
VERICOM Single Section Wall Mount Cabinets are shipped unassembled
and flat packed to minimize shipping cost and simplify on-site handling.
865.671.4455
10
Cabinets
Double Section Wall Mount Cabinets
Compliance
• ANSI/EIA RS-310D
• IEC60297-2
• DIN41194; Part 1
• DIN41494; Part 7
Construction
• Fully welded, black powder-coated cold rolled steel
Loading Capacity
• Up to 100 lb (45 kg)
Features and Benefits
• 3/4 inch, 1 inch and 2 inch knockouts
for pipe fittings and cable entry
• Cable entry on top and bottom
• Lace points reduce cable clutter
• Lockable plexiglass front door
• Rear section opens from either side and
is removable for easier installation
• Rear hinge allows the cabinet to swing out 90 degrees from the wall for convenient access to cables and connections at the RDSN2-56121
back of equipment
• Removable 12 x 12 back panel
• Reversible right or left-handed front door with 180 degree swing
• Assembles in 30 minutes or less
Lace points in rear panel
reduce cable clutter
Ordering Information
PART NUMBER
RU
WIDTH
DEPTH
HEIGHT
RDSN2-56091
9
21.25” (540 mm)
23.625” (600 mm)
18” (460 mm)
RDSN2-56121
12
21.25” (540 mm)
23.625” (600 mm)
23.375” (595 mm)
RDSN2-56151
15
21.25” (540 mm)
23.625” (600 mm)
28.5” (725 mm)
www.vericomsolutions.com
11
Cabinets
Double Section Wall Mount Cabinets
Technical Specifications
ITEM/ SKU#
RSSN2-56091
RSSN2-56121
RSSN2-56151
9
12
15
RACK UNIT QUANTITY
HEIGHT
18” (460 mm)
23.375” (595 mm)
28.5” (725 mm)
WIDTH
21.25” (540 mm)
21.25” (540 mm)
21.25” (540 mm)
DEPTH
23.625” (600 mm)
23.625” (600 mm)
23.625” (600 mm)
THROW*
40.25” (1022 mm)
40.25” (1022 mm)
40.25” (1022 mm)
44 lb (20 kg)
51 lb (23 kg)
58 lb (26.4 kg)
WEIGHT
STATIC LOADING CAPACITY
100 lb (45 kg)
MATERIAL THICKNESS
16 gauge rails
FRONT DOOR
Lockable steel frame with full panel plexiglass window and left or right 180 degree swing
REAR DOOR
Rear hinge allows cabinet to swing out from wall 90 degrees from either left or right corner
SIDE PANELS
Hinged and removable
NUMBERED RU MARKINGS
Yes
HOLE TYPE
10-32 threaded
HARDWARE INCLUDED
(48) 10-32 screws, (48) plastic washers, extra keys, allen wrench and all assembly hardware
Highlights
Ventilation in top panel
helps keep equipment cool
Access equipment from
the front and back
VERICOM Double Section Wall Mount Cabinets are shipped
unassembled and flat packed to minimize shipping cost
and simplify on-site handling.
865.671.4455
12
Racks
Steel Relay Racks: 2 Post
Compliance
• ANSI/EIA RS-310D
• IEC60297-2
• DIN41194; Part 1
• DIN41494; Part 7
Material
• Fully welded, black powder-coated cold rolled steel
Loading Capacity
• Up to 550 lb (250 kg)
Features and Benefits
• Both threaded and cage hole mounting profiles
• Includes adjustable feet or can be floor mounted
• Ships in an economical flat pack container
• Standard EIA-310-D hole spacing
• Supports 19-inch EIA equipment
• Unrestricted airflow for maximum ventilation
• Assembles in 30 minutes or less
RORAE-66421
Ordering Information
PART NUMBER
RU
WIDTH
DEPTH
RORAE-66421
42
23.625” (600 mm)
23.625” (600 mm)
78.75” (2000 mm)
HEIGHT
RORAE-66471
47
23.625” (600 mm)
23.625” (600 mm)
87.5” (2223 mm)
www.vericomsolutions.com
13
Racks
Steel Relay Racks: 2 Post
Technical Specifications
ITEM/ SKU#
RORAE-66421
RACK UNIT QUANTITY
RORAE-66471
42
47
HEIGHT
78.75” (2000 mm)
87.5” (2223 mm)
WIDTH
23.625” (600 mm)
23.625” (600 mm)
DEPTH
23.625” (600 mm)
23.625” (600 mm)
55 lb (25 kg)
61 lb (28 kg)
WEIGHT
STATIC LOADING CAPACITY
550 lb (250 kg)
MATERIAL THICKNESS
(14 gauge) all components other than decorative cover plate
HOLE TYPE
10-32 threaded and cage
FEET/ CASTERS
(4) adjustable feet or floor mounted
HARDWARE INCLUDED
(48) 10-32 screws, (48) plastic washers, (48) cage nuts, and all assembly hardware
Highlights
Equipped with threaded
and cage hole profiles
Includes 4 adjustable
feet standard
Close up view
of cover plate
VERICOM 2 Post Steel Relay Racks are shipped unassembled and flat
packed to minimize shipping cost and simplify on-site handling.
865.671.4455
14
Racks
Steel Relay Racks: 4 Post
Compliance
• ANSI/EIA RS-310D
• IEC60297-2
• DIN41194; Part 1
• DIN41494; Part 7
Material
• Fully welded, black powder-coated cold rolled steel
Loading Capacity
• Up to 550 lb (250 kg)
Features and Benefits
• Both threaded and cage hole mounting profiles
• Includes adjustable feet or can be floor mounted
• Ships in an economical flat pack container
• Standard EIA-310-D hole spacing
• Supports 19-inch EIA equipment
• Unrestricted airflow for maximum ventilation
• Assembles in 30 minutes or less
Ordering Information
RDRAE-66421
PART NUMBER
RU
WIDTH
DEPTH
RDRAE-66421
42
23.625” (600 mm)
23.625” (600 mm)
78.75” (2000 mm)
HEIGHT
RDRAE-66471
47
23.625” (600 mm)
23.625” (600 mm)
87.5” (2223 mm)
www.vericomsolutions.com
15
Racks
Steel Relay Racks: 4 Post
Technical Specifications
ITEM/ SKU#
RDRAE-66421
RACK UNIT QUANTITY
RDRAE-66471
42
47
HEIGHT
78.75” (2000 mm)
87.5” (2223 mm)
WIDTH
23.625” (600 mm)
23.625” (600 mm)
DEPTH
23.625” (600 mm)
23.625” (600 mm)
101 lb (46 kg)
110 lb (46 kg)
WEIGHT
STATIC LOADING CAPACITY
550 lb (250 kg)
MATERIAL THICKNESS
(14 gauge) all components other than decorative cover plate
HOLE TYPE
10-32 threaded and cage
FEET/ CASTERS
(4) adjustable feet or floor mounted
HARDWARE INCLUDED
(48) 10-32 screws, (48) plastic washers, (48) cage nuts, and all assembly hardware
Highlights
Equipped with threaded
and cage hole profiles
Brackets and screws make
for a quick and easy assembly
Close up view
of cover plate
VERICOM 4 Post Steel Relay Racks are shipped unassembled and flat
packed to minimize shipping cost and simplify on-site handling.
865.671.4455
16
Racks
Steel Relay Racks: Expansion Kit
Compliance
• ANSI/EIA RS-310D
• IEC60297-2
• DIN41194; Part 1
• DIN41494; Part 7
Material
• Fully welded, black powder-coated cold rolled steel
Loading Capacity
• Up to 550 lb (250 kg)
Features and Benefits
• Expands a 2 post rack to a 4 post rack
Technical Specifications
ITEM/ SKU#
RACEX-00460
RACK UNIT QUANTITY
RACEX-00461
42
47
HEIGHT
78.75” (2000 mm)
87.5” (2223 mm)
WIDTH
23.625” (600 mm)
23.625” (600 mm)
46 lb (21 kg)
50 lb (23 kg)
WEIGHT
STATIC LOADING CAPACITY
550 lb (250 kg)
MATERIAL THICKNESS
14 gauge
HOLE TYPE
10-32 threaded and cage
HARDWARE INCLUDED
All assembly hardware
RACEX-00460
*View of this product is from the
rear of the 4 Post Expansion Kit
*Expansion Kit includes all areas
in image that are black
VERICOM Steel Relay Rack Expansion Kits are are shipped unassembled
and flat packed to minimize shipping cost and simplify on-site handling.
Ordering Information
PART NUMBER
RU
WIDTH
RACEX-00460
42
23.625” (600 mm)
78.75” (2000 mm)
HEIGHT
RACEX-00461
47
23.625” (600 mm)
87.5” (2223 mm)
www.vericomsolutions.com
17
Racks
Aluminum Relay Rack Systems
Compliance
• ANSI/EIA RS-310D
• DIN41194; Part 1
• IEC60297-2
• DIN41494; Part 7
Material
• 4.0 mm aluminum plate
Loading Capacity
• Up to 330 lb (150 kg)
Features and Benefits
• Available in two heights
• Designed for floor mounting
• RU markings for faster equipment mounting
• Ships in an economical flat pack container for
ultimate protection and reduced shipping cost
• Standard EIA-310-D hole spacing
• Supports 19-inch EIA equipment
• Threaded hole mounting profile
Technical Specifications
ITEM/ SKU#
RARAE-53421
RARAE-53471
42
47
HEIGHT
78.5” (1997 mm)
87.5” (2223 mm)
WIDTH
20.25” (514 mm)
20.25” (514 mm)
DEPTH
15” (380 mm)
15” (380 mm)
WEIGHT
19 lb (8.6 kg)
23 lb (10.4 kg)
RACK UNIT QUANTITY
STATIC LOADING CAPACITY
331 lb (150 kg)
MATERIAL THICKNESS
4.0 mm aluminum plate
NUMBERED RU MARKINGS
Yes
HOLE TYPE
10-32 threaded
FEET/ CASTERS
N/A - floor mounted only
HARDWARE INCLUDED
(48) 10-32 screws and (48) plastic washers
RARAE-53421
Ordering Information
PART NUMBER
RU
WIDTH
DEPTH
RARAE-53421
42
20.25” (514 mm)
15” (380 mm)
78.5” (1997 mm)
RARAE-53471
47
20.25” (514 mm)
15” (380 mm)
87.5” (2223 mm)
865.671.4455
HEIGHT
18
Cabinet & Rack Accessories
Shelf: Cantilever Shelf with Vent Holes
Features
• Material: Black powder-coated cold rolled steel
• Used primarily for relay racks, but can also be used
with cabinets
• Requires 2U for mounting
• Available in 3 depths: 12 Inch, 14 Inch, and 16 Inch
RACCS-01587
Technical Specifications
ITEM/ SKU#
RACCS-01587
RACCS-01588
RACCS-01589
2
2
2
RACK UNIT QUANTITY
HEIGHT
Ordering Information
4” (102 mm)
4” (102 mm)
4” (102 mm)
WIDTH
19” (483 mm)
19” (483 mm)
19” (483 mm)
PART NUMBER
DEPTH
DEPTH
12” (305 mm)
14” (356 mm)
16” (406 mm)
RACCS-01587
12”
3.9 lb (1.77 kg)
4.4 lb (2 kg)
6.5 lb (2.95 kg)
RACCS-01588
14”
RACCS-01589
16”
WEIGHT
COMPATIBILITY
All cabinets and racks
Shelf: Fixed Shelf
Features
• Material: Black powder-coated cold rolled steel
• Used for 19 Inch network and server cabinets
• Static load capacity: 198 lb (90 kg)
• Available in 2 sizes: 21.5 Inch
and 28.5 Inch Depth
RACFS-01590
Technical Specifications
ITEM/ SKU#
RACK UNIT QUANTITY
HEIGHT
RACFS-01590
RACFS-01591
1
1
1.25” (32 mm)
1.25” (32 mm)
WIDTH
19.25” (489 mm)
19.25” (489 mm)
DEPTH
21.5” (546 mm)
28.25” (718 mm)
WEIGHT
COMPATIBILITY
6.2 lb (2.81 kg)
All network and server
cabinets (not compatible with
wall mount cabinets or racks)
8.3 lb (3.76 kg)
1067 mm depth cabinets only
(not compatible with wall
mount cabinets or racks)
Ordering Information
PART NUMBER
DEPTH
RACFS-01590
21.5”
RACFS-01591
28.5”
www.vericomsolutions.com
19
Cabinet & Rack Accessories
Shelf: Keyboard Shelf
Features
• Material: Black powder-coated cold rolled steel
• Used for 19 Inch network and server cabinets
• Accomodates keyboards up to 400 mm in width
• Available in 2 depths: RACKS-00847 for mounting
in the 800 mm Depth Cabinets and RACKS-01592 for
mounting in the 1067 mm Depth Cabinets
RACKS-01592
Technical Specifications
ITEM/ SKU#
RACKS-00847
RACKS-01592
1
1
RACK UNIT QUANTITY
HEIGHT
2.375” (60 mm)
2.375” (60 mm)
WIDTH
19” (483 mm)
19” (483 mm)
DEPTH
14.75”- 26”
(375 mm - 660 mm)
23”-36”
(584 mm - 914 mm)
WEIGHT
COMPATIBILITY
7.9 lb (3.6 kg)
800 mm depth cabinets (not
compatible with wall mount
cabinets or racks)
8.45 lb (3.83 kg)
1067 mm depth cabinets (not
compatible with wall mount
cabinets or racks)
Ordering Information
PART NUMBER
DEPTH
RACKS-00847
14.75” - 26”
RACKS-01592
23” - 36”
Drawer: Locking Drawer
Features
• Material: Black powder-coated cold rolled steel
• Used primarily for 19 inch network and server
cabinets, but can be used for relay racks
• Includes a knockout for power supply to a laptop
• Static load capacity: 77 lb (35 kg)
• Available in 2U and 3U
• Additional information available
at vericomsolutions.com
RACLD-01560
Ordering Information
865.671.4455
PART NUMBER
RU
RACLD-01559
2
RACLD-01560
3
20
Cabinet & Rack Accessories
Panel: Blank Filler Panel
Features
• Material: Black powder-coated cold rolled steel
• For covering unused rack spaces and improving airflow
• Available in 1U, 2U, 3U, 4U
RACBP-01593
Technical Specifications
ITEM/ SKU#
RACK UNIT
QUANTITY
HEIGHT
RACBP-01593
RACBP-01594
RACBP-01595
RACBP-01596
2
3
4
1
1.75”
(44 mm)
3.5”
(89 mm)
5.25”
(133 mm)
7”
(178 mm)
WIDTH
19”
(483 mm)
19”
(483 mm)
19”
(483 mm)
19”
(483 mm)
DEPTH
0.375”
(10 mm)
0.375”
(10 mm)
0.375”
(10 mm)
0.375”
(10 mm)
0.5 lb
(0.227 kg)
1 lb
(0.45 kg)
1.4 lb
(0.64 kg)
1.5 lb
(0.68 kg)
WEIGHT
COMPATIBILITY
All cabinets and racks
Ordering Information
PART NUMBER
RU
RACBP-01593
1
RACBP-01594
2
RACBP-01595
3
RACBP-01596
4
Panel: Filler Panel with Vents
Features
• Material: Black powder-coated cold rolled steel
• For covering unused rack spaces
• Vents offer customization and cooling effeciency
• Available in 1U, 2U, 3U, 4U
RACBP-01599
Technical Specifications
ITEM/ SKU#
RACK UNIT
QUANTITY
HEIGHT
RACBP-01597
RACBP-01598
RACBP-01599
RACBP-01600
2
3
4
1
1.75”
(44 mm)
3.5”
(89 mm)
5.25”
(133 mm)
7”
(178 mm)
WIDTH
19”
(483 mm)
19”
(483 mm)
19”
(483 mm)
19”
(483 mm)
DEPTH
0.375”
(10 mm)
0.375”
(10 mm)
0.375”
(10 mm)
0.375”
(10 mm)
0.5 lb
(0.227 kg)
1 lb
(0.45 kg)
1.4 lb
(0.64 kg)
1.5 lb
(0.68 kg)
WEIGHT
COMPATIBILITY
All cabinets and racks
Ordering Information
PART NUMBER
RU
RACBP-01597
1
RACBP-01598
2
RACBP-01599
3
RACBP-01600
4
www.vericomsolutions.com
21
Cabinet & Rack Accessories
Cable Manager: Finger
Features
• Material: Black powder-coated cold rolled steel
• Available in 1U size
• Mountable to standard 19” cabinets and racks
• Minimizes clutter and promotes
organization based on individual needs
• Offers versatility
Technical Specifications
ITEM/ SKU#
RACCM-01604
RACK UNIT QUANTITY
1
HEIGHT
1.75” (44 mm)
WIDTH
19” (483 mm)
DEPTH
3.125” (79 mm)
WEIGHT
COMPATIBILITY
1 lb (0.45 kg)
All cabinets and racks
Ordering Information
PART NUMBER
DESCRIPTION
RACCM-01604
Finger Type Cable Manager
Cable Manager: Slot
Features
• Material: Black powder-coated cold rolled steel
• Available in 1U size
• Mountable to standard 19” cabinets and racks
• Minimizes clutter and promotes organization
based on individual needs
• Offers versatility
• Two piece, snaps together
Technical Specifications
ITEM/ SKU#
RACK UNIT QUANTITY
RACCM-01605
1
HEIGHT
1.75” (44 mm)
WIDTH
19” (483 mm)
DEPTH
3.125” (79 mm)
WEIGHT
1.7 lb (0.77 kg)
COMPATIBILITY
865.671.4455
All cabinets and racks
Ordering Information
PART NUMBER
DESCRIPTION
RACCM-01605
Slot Type Cable Manager
22
Cabinet & Rack Accessories
Cable Manager: Brush
Features
• Material: Black powder-coated cold rolled steel
• Available in 1U size
• Mountable to standard 19” cabinets and racks
• Minimizes clutter and promotes
organization based on individual needs
• Offers versatility
Brush bristles provide maximum
flexibility in cable management
Technical Specifications
ITEM/ SKU#
RACK UNIT QUANTITY
RACCM-01606
1
HEIGHT
1.75” (44 mm)
WIDTH
19” (483 mm)
DEPTH
0.5” (13 mm)
WEIGHT
COMPATIBILITY
0.5 lb (0.23 kg)
All cabinets and racks
Ordering Information
PART NUMBER
DESCRIPTION
RACCM-01606
Brush Type Cable Manager
Call VERICOM for More Information
865.671.4455
www.vericomsolutions.com
23
Cabinet & Rack Accessories
Cabinet & Rack Casters: Two Inch Casters
Features
• 360 degree swivel
• Allows for ease of movement
• Sold in packs of 2
Technical Specifications
ITEM/ SKU#
2.75” (70 mm)
WIDTH
COMPATIBILITY
Ordering Information
RACCA-00462
HEIGHT
2.125” (54 mm)
DEPTH
WEIGHT
3” (76 mm)
2.7 lb (1.225 kg)
All network and server cabinets (not compatible with wall mount
cabinets or aluminum racks)
PART NUMBER
Type
RACCA-00462
Casters
Cabinet & Rack Casters: Lockable Brake Casters
Features
• 360 degree swivel
• Allows for ease of movement with the ability to lock in place
• Sold in packs of 2
Technical Specifications
ITEM/ SKU#
HEIGHT
2.75” (70 mm)
WIDTH
COMPATIBILITY
Ordering Information
RACCA-01602
2.125” (54 mm)
DEPTH
WEIGHT
3” (76 mm)
2.8 lb (1.27 kg)
All network and server cabinets (not compatible with wall mount
cabinets or aluminum racks)
PART NUMBER
Type
RACCA-01602
Lockable Brake Casters
Cabinet & Rack Feet: Adjustable Feet
Features
• Slip-resistant material on bottom pads
• Sold in packs of 4
Technical Specifications
ITEM/ SKU#
HEIGHT
3.875” (98 mm)
WIDTH
COMPATIBILITY
Ordering Information
RACAF-01603
1.5” (38 mm)
DEPTH
WEIGHT
1.5” (38 mm)
1.1 lb (0.5 kg)
All network cabinets, server cabinets and steel racks
865.671.4455
PART NUMBER
Type
RACAF-01603
Adjustable Feet
24
Cabinet & Rack Feature Comparison
ITEM
AVAILABLE RU SIZE
9, 12, 15
9, 12, 15
42, 47
42, 47
42, 47
42, 47
42, 47
42, 47
66
66
330
550
550
2,866
2,866
2,866
STANDARD 19” EIA SPACING
X
X
X
X
X
X
X
X
ADJUSTABLE DEPTH
X
X
X
X
X
10-32 THREADED HOLES
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
STATIC LOADING CAPACITY (Lb)
CAGE HOLES
RU MARKINGS
X
X
X
X
VERTICAL CABLE
MANAGEMENT CHANNEL
LOCKABLE
X
X
X
X
X
REVERSIBLE
X
X
X
X
X
180 DEGREE SWING
X
X
X
X
X
X
X
X
FULL PLEXIGLASS WINDOW
w/ STEEL FRAME
FULL PLEXIGLASS WINDOW
w/ VENTED STEEL FRAME
X
FULLY VENTED STEEL
X
SOLID STEEL
X
FULLY VENTED STEEL
X
FULLY VENTED SPLIT STEEL
X
REMOVABLE
X
X
X
X
LOCKABLE
X
X
X
X
HINGED
X
FULL PANEL
X
X
X
X
FAN
X
X
X
ADJUSTABLE CABLE ENTRY - TOP
X
X
X
X
X
X
X
X
X
HALF HEIGHT
SWING OUT SECTION
REMOVABLE REAR PANEL
KNOCKOUT CABLE ENTRY - TOP
X
X
X
X
X
X
X
ADJUSTABLE CABLE ENTRY - BOTTOM
KNOCKOUT CABLE ENTRY - BOTTOM
PRE-INSTALLED CASTERS
ADJUSTABLE LEVELING FEET
X
X
X
X
X
FLAT PACKED
X
X
X
X
X
X
X
X
ASSEMBLED < 30 MINUTES
X
X
X
X
X
X
X
X
Call VERICOM for More Information
865.671.4455
www.vericomsolutions.com
865.671.4455
VERICOM Global Solutions
10025 Investment Avenue, Suite 120
Knoxville, TN 37932
www.vericomsolutions.com
twitter: @_VERICOM_
865.671.4455
©
2013 v1 VERICOM Global Solutions
Download PDF
Similar pages