HP ConvergedSystem 100 for HDI

QuickSpecs
HP ConvergedSystem 100 for HDI
Overview
HP Convergedsystem 100 for hosted desktops with the HP ProLiant m700 server cartridge was created for cost-effective Hosted
Desktop Infrastructure (HDI). The ProLiant m700 server cartridge has four AMD X2150 APU System on a Chip (SoC) having up to four
x86 cores with integrated Graphics Processing Unit (GPU) and each supporting 8GB of memory. Each cartridge also has one SATA
attached 256GB iSSD mezz card split discreetly as 64GB to each of the 4 processor nodes .
The HP CS100 is based on HP's Moonshot technology system and uses an innovative new architecture that results from one simple
design tenet: to align purpose-built modules with the right workload to provide optimal results for your environment. Traditional
servers rely on dedicated components, including management, networking, storage, power cords and cooling fans in a single chassis.
In contrast, the Moonshot system share these chassis components and are capable of supporting 45 cartridges per 4.3U chassis.
This gives you the ability to generate greater revenue from a smaller footprint while driving down your operational costs.
Front View:
1. QR Code label
2.
3.
4.
5.
6.
Back View:
7. Four (4) DDR3 SODIMM memory slots
Cartridge link LED/button
Cartridge UID LED/button
Cartridge health LED
Cartridge power LED/button
Four (4) AMD Opteron™ X2150 APU SoC
DA - 14819 Worldwide — Version 3 — March 31, 2014
Page 1
QuickSpecs
HP ConvergedSystem 100 for HDI
Overview
Models
HP ProLiant m700 Server Cartridge
NOTE: For ordering the HP ProLiant m700 Server Cartridge, please see Step 1 of the Configuration to Order section
of this QuickSpecs.
DA - 14819 Worldwide — Version 3 — March 31, 2014
733747-B21
Page 2
QuickSpecs
HP ConvergedSystem 100 for HDI
Standard Features
NOTE: For information on HP Moonshot 1500 Chassis (including network switches and uplinks), please see the following:
http://h18000.www1.hp.com/products/quickspecs/14527_div/14527_div.html
HP Moonshot-180G Switch Module QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/14731_div/14731_div.html
HP Moonshot- 4QSFP Uplink Module QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/14733_div/14733_div.html
Processor
AMD Opteron™ X2150 APU, 1.5Ghz
Cache Memory
2MB L2 cache
Chipset
NA
Memory Protection
ECC
Memory
Type
DIMM Slots Available
Maximum Configuration
Network Controller
Broadcom BCM5720 Ethernet Controller
Storage Controller
Integrated SATA controller on the System on a Chip (SoC)
Maximum Internal
Storage
Up to 64 GB per SoC (mezzanine card)
Interfaces
Power LED/button
UID for node
Drive health LED/button
Cartridge health LED
Industry Standard
Compliance
ACPI 2.0 and 3.0a Compliant
SMBIOS 2.6+
PXE Support
DDR3 PC3-12800 SDRAM (1600 MHz)
Four (4) SODIMM Slots (One per SoC)
32GB (1x8GB per SoC)
One per server cartridge
One per server cartridge
N/A
One per server cartridge
DA - 14819 Worldwide — Version 3 — March 31, 2014
Page 3
QuickSpecs
HP ConvergedSystem 100 for HDI
Standard Features
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server, Microsoft Windows7 Enterprise SP1
NOTE: Only 64-bit versions of these operating systems are supported.
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server including how to purchase from
HP, please visit our OS Support Site at: http://www.hp.com/go/ossupport and our driver download page:
http://www.hp.com/go/servers/Moonshot/download
Enclosure
The HP Moonshot 1500 Chassis is designed to support the following:
The HP Moonshot 1500 Chassis is 4.3U high and holds up to forty-five (45) HP ProLiant m700 Server
Cartridge plugged vertically.
Server cartridges, switches, uplinks, power supplies, fans, and HP Moonshot 1500 Chassis
Management module are all designed to fit into the HP Moonshot 1500 Chassis.
NOTE: Can be racked as either a 5U tall chassis or as three chassis in 13U.
NOTE: For additional chassis information, please see:
http://h18000.www1.hp.com/products/quickspecs/14757_div/14757_div.html
Graphics
128 Radeon HD 8000 Cores (up to 500Mhz)
Form Factor
HP CS100 for HDI uses HP ProLiant m700 server cartridge that plugs into the HP Moonshot 1500 Chassis.
On System Management
On System Management provided via HP Moonshot 1500 Chassis Management module, complete with
support for SL-APM. For more information, visit:
http://h18000.www1.hp.com/products/quickspecs/14757_div/14757_div.html
The HP Moonshot 1500 Chassis Management module manages the health of the chassis and servers and
includes a command-line interface accessible via SSH to configure the chassis and server settings and
control server power and UID lights, use Virtual Serial Port to servers, and to flash firmware in the chassis.
It also supports IPMI management.
HP Moonshot iLO Chassis Management Firmware is the gateway for aggregated chassis management on
HP Moonshot. Moonshot iLO CM firmware reduces cost and power by sharing four iLO modules across the
nodes and other system components. As a single point of access to the chassis, Moonshot iLO CM firmware
allows you to configure, update, and operate HP Moonshot via CLI, IPMI, and remote serial console access.
For more information, see the HP Moonshot iLO Chassis Management Firmware User Guide on the HP
Project Moonshot Information Library (http://www.hp.com/go/moonshot/docs).
DA - 14819 Worldwide — Version 3 — March 31, 2014
Page 4
QuickSpecs
HP ConvergedSystem 100 for HDI
Optional Features
High Performance
Clusters
HP Insight Cluster
Management Utility
HP Insight Cluster Management Utility (CMU) is an HP-licensed and HPsupported suite of tools that are used for lifecycle management of hyperscale
clusters of Linux ProLiant systems. CMU includes software for the centralized
provisioning, management and monitoring of nodes. CMU makes the
administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
Factory Express Portfolio HP Factory Express offers configuration, customization, integration and deployment services for HP
for Servers and Storage servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
DA - 14819 Worldwide — Version 3 — March 31, 2014
Page 5
QuickSpecs
HP ConvergedSystem 100 for HDI
Service and Support
Service and Support
HP Technology Services for Moonshot
Capitalizing on the Moonshot 1500 System requires a service partner who understands your increasingly
complex business technology environment. That's why it makes sense to team up with the people who
know HP infrastructure hardware and software best - the experienced professionals at HP Technology
Services.
HP is pleased to include full software support for Ubuntu Linux as part of your Moonshot chassis purchase.
For chassis supporting revenue-generating or production level workloads, consider purchasing a level of
support that matches your requirements.
Protect your business beyond warranty with HP Care Pack Services
HP sells support in easy-to-buy, preconfigured packages with the combination of services, coverage and
duration to fit your needs and budget. With Moonshot, we are introducing a new, simpler set of services.
Simply choose the service level that best fits the criticality of your hardware.
HP Foundation Care
HP introduces new Foundation Care services offer scalable reactive support-packages for HP Moonshot
and software. You can choose the type and level of service that is most suitable for your IT and business
needs. The Moonshot 1500 Care Pack services cover the Moonshot 1500 Chassis and the Moonshot servers
with one single Care Pack SKU. Entitlement of support requires the customer to provide the 1500 chassis
serial number. All HP components structured to the Moonshot System are covered by Care Pack services
inclusive of switches, power supplies, and fans. HP Foundation Care services include hardware support,
basic software support and collaborative call handling for software questions related to industry leading
operating systems and software. For a complete list of software products covered, refer to:
www.hp.com/services/collaborativesupport.
Full software support, including call management and ownership thru to resolution is available for select
third party software. As stated earlier, support for Ubuntu software is included in the purchase of your
Moonshot chassis.
HP Datacenter Care
HP Datacenter Care offers you a flexible, tailored, relationship-based approach to support the most
demanding data centers handling the demands of hyperscale computing. This is an environment level
service, purchased once to support your Moonshot environment. Other equipment may be included in this
agreement for holistic datacenter coverage. With HP Datacenter Care, you still have the choice of HP
Foundation Care reactive support which you purchase with each chassis.
HP Datacenter Care is flexible enough to deliver exactly what you need in one relationship. All Datacenter
Care support is tailored to your needs, based on our experience with hyperscale customers:
Assigned account team, led by an account support manager (ASM) who knows your business and
your IT environment and is responsible for the quality service delivery and experience.
Enhanced call handling for the best call experience with rapid escalation and incident resolution
through the HP Hyperscale Center of Excellence
Proactive and reactive support, configured to deliver the level of support needed by the different
data center components and meeting both service-level agreement (SLA) and cost targets
Then add on other services that are tailored to your specific needs, including:
HP Self-Service Spares Service answers the question: What do you do when you need parts? We can set it
DA - 14819 Worldwide — Version 3 — March 31, 2014
Page 6
QuickSpecs
HP ConvergedSystem 100 for HDI
Service and Support
up so that you get spare parts onsite through our automated self-service spares. You simply go to the part
of your data center where the parts live, scan them out, scan in the broken one, and you're done. We
maintain your inventory of good spares, so that what you need is ready to go when you need it. And we
provide monthly service excellence reports illustrating onsite inventory performance.
To obtain further information or to order HP Datacenter Care Service as described above, contact a local
HP sales representative. Please see the Additional Options section of this QuickSpecs for additional
information.
HP Moonshot Installation & Startup Service
HP Installation and Startup Service for the Moonshot System provides for the installation of one system
and its associated Moonshot servers and network switches, as well as operating system deployment and
basic configuration of OS network parameters to establish network connectivity
In response to the needs of the majority of HP Moonshot System customers, this fixed-price/fixed
deliverable service targets new hardware installation and software deployments for the 1500
infrastructure. For more advanced installation, configuration, and integration requirements, custom
deployments are available through a customized Statement of Work. . Please see the Additional Options
section of this QuickSpecs for additional information.
For more information on HP Services, contact any of our worldwide sales offices or visit one of the
following websites:
HP support services: www.hp.com/services/alwayson
HP Care Pack services: www.hp.com/services/carepack
Recommended HP Care Pack Services for your HP product
Optimized Care
3-Year HP Foundation Care Call to Repair
This is HP's highest level of reactive support giving you our commitment to have the hardware operational
within six hours of opening the call with us. This service level includes hardware coverage plus software
diagnosis support with collaborative call management for a broad spectrum of third party software
products including O/S and hypervisors.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA4-8877ENW.pdf
Standard Care
3-Year HP Foundation Care 24x7
This service level provides consistent, reliable reactive support with the broadest coverage window which
is recommended when maintenance must be performed outside business hours. Calls may be opened
24x7. Should an onsite visit be needed, our commitment is to respond onsite within four hours. Software
call back commitment is two hours.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-8877ENW.pdf
DA - 14819 Worldwide — Version 3 — March 31, 2014
Page 7
QuickSpecs
HP ConvergedSystem 100 for HDI
Service and Support
Basic Care
3- Year HP Foundation Care Next Business Day
This service level provides the most economical support coverage and is designed for non-revenue
impacting systems. Calls may be opened 24x7. Should an onsite visit be needed, our commitment is to
respond onsite the next business day. Software call back commitment is two hours, during regular
business hours.
For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or
visit our website at: www.hp.com/go/carepack
Defective Media
Retention (DMR) and
Comprehensive Defective
Material Retention
If your business deals with sensitive or legally protected data, you know that it's not a simple matter to
return a defective hardware component, but keeping it conflicts with the terms and conditions of many
standard warranty agreements. If you don't return the component, you'll be charged for the replacement
part.
HP Foundation Care services are available with defective media retention of failed hard drives and
comprehensive defective material retention of those other data-retentive components, such as memory,
switches, processors and more. This may be purchased as an optional add-on to your HP Foundation Care
service purchase. This service is critical for customers who:
Need to control and secure their classified, proprietary and confidential data.
Are subject to current data privacy regulations.
Want a simpler, more cost-effective solution when choosing not to return a malfunctioning disk
drive or other data retentive component.
For more information on our data privacy services, see: www.hp.com/services/dataprivacy.
HP Support Center
HP provides several tools that make it simpler to get help from HP:
HP Support Center is personalized online support portal with access to information, tools and experts to
support HP business products. Submit support cases online, chat with HP experts, access support
resources or collaborate with peers. Learn more: http://www.hp.com/go/hpsc
HP's Support Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalize IT support anywhere, anytime.
HP Support Center is available at no additional cost with a HP warranty, HP Care Pack or HP contractual
support agreement.
NOTE: HP Support Center Mobile App is subject to local availability.
DA - 14819 Worldwide — Version 3 — March 31, 2014
Page 8
QuickSpecs
HP ConvergedSystem 100 for HDI
Configuration Information - Factory Integrated Models
CS100 for HDI can contain up to Forty Five (45) identically configured Moonshot ProLiant m700 server cartridges per 1500 chassis.
NOTE: All cartridges in the chassis will be identical on a per chassis basis.
Four(4) 1500W Common Slot Platinum Plus Power Supplies included (N+1)
NOTE: Additional power supply kits may be ordered to achieve N+1 redundancy.
Two (2) HP Moonshot-180G Switch Modules
and
Two (2) HP Moonshot-4QSFP+ Uplink Module
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of
an HP approved configurator. Contact your local sales representative for additional information.
Step 1: Base Configuration (Choose one HP Moonshot 1500 Chassis)
HP Moonshot 1500
Chassis
HP ConvergedSystem 100 for Hosted Desktops - Standard 32GB (Non Persistent)
HP ConvergedSystem 100 for Hosted Desktops - Performance 64GB (Persistent)
HP CS100 HDI Chassis Standard Starter Kit - 15 Cartridges only
HP CS100 HDI Chassis Performance Starter Kit - 15 Cartridges only
NOTE: Must order identically configured Moonshot servers within same Moonshot 1500
chassis.
751820-B21
G3T51A
G6F51A
G3T52A
Step 2: Choose Upgrade Options (cartridges must match starter system)
Server Cartridges
Power Supplies
HP CS100 HDI Chassis Standard Expansion Kit - 15 cartridges 32GB
HP CS100 HDI Chassis Performance Expansion Kit - 15 cartridges 64GB
HP Common Slot Platinum Plus Power Supply Kits
HP 1500W Common Slot Platinum Plus Hot Plug Power Supply Kit
NOTE: Power Specification and Technical Content for supported power supplies can be
found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
NOTE: Minimum of four 1500W power supplies per chassis when ordering the HP
Moonshot CS100 models.
G6F52A
G6F50A
684532-B21
Step 3: Choose additional Factory Integrated Options
HP Rack Adapter
HP 13U FIO Rack Adapter Kit for 3X4.3U Chassis
NOTE: Group the HP Moonshot 1500 Chassis units into a 13U space. Order one per three
chassis. The 0.66U spacer is not used when selecting this option. Utilizing HP Factory
Express Services for this part is highly recommended.
DA - 14819 Worldwide — Version 3 — March 31, 2014
681677-B21
Page 9
QuickSpecs
HP ConvergedSystem 100 for HDI
Configuration Information - Factory Integrated Models
Step 4: Choose additional options for Factory Integration
HP Power Cords
HP C13 - Nema 5-15P US/CA 110V 10Amp 1.83m Power Cord
HP C13 - GB-1002 CN 250V 10Amp 1.83m Power Cord
HP C13 - IRAM -2073 AR 250V 10A 2.5m Power Cord
HP C13 - Nema 5-15P TH/PH 250V 10Amp 1.83m Power Cord
HP C13 - CNS-690 TW 110V 13Amp 1.83m Power Cord
HP C13 - IS-1293 IN 240V 6Amp LV 2.0m Power Cord
HP C13 - KSC- 8305 KR 250V 10Amp 1.83m Power Cord
HP C13 - SI-32 IL 250V 10Amp 1.83m Power Cord
HP C13 - SEV 1011 CH 250V 10Amp 1.83m Power Cord
AF556A
AF557A
AF558A
AF559A
AF561A
AF562A
AF560A
AF564A
AF565A
HP C13 - DK-2.5A DK 250V 10Amp 1.83m Power Cord
HP C13 - SABS-164 ZA 250V 10Amp 2.5m Power Cord
HP C13 - CEE-VII EU 250V 10Amp 1.83m Power Cord
HP C13 - AS3112-3 AU 250V 10Amp 2.5m Power Cord
HP C13 - BS-1363A UK/HK/SG 250V 10Amp 1.83m Power Cord
HP C13 - CEI-23-50 IT/CL 250V 10Amp 1.83m Power Cord
HP C13 - JIS C8303 JP 100V 12Amp 2.0m Power Cord
HP C13 - IS-1293 IN 250V 10Amp HV 2.5m Power Cord
HP C13 - C14 WW 250V 10Amp Flint Gray 2.0m Jumper Cord
HP C13 - NBR-14136 BR 250V 10Amp 1.83m Power Cord
HP C13 - C14 WW 250V 10Amp 2.0m Jumper Cord
HP C13 - C14 WW 250V 10A Gray 0.7m Jumper Cord
HP C13 - C14 WW 250V 10A Gray 1.37m Jumper Cord
HP C13 - C14 WW 250V 10A Gray 3.0m Jumper Cord
HP C13 - Nema 6-15P US 250V 15A JP 3.6m Power Cord
AF566A
AF567A
AF568A
AF569A
AF570A
AF571A
AF572A
SG579A
AF573A
AF591A
A0K02A
A0K03A
A0K04A
A0K06A
A0N33A
DA - 14819 Worldwide — Version 3 — March 31, 2014
Page 10
QuickSpecs
HP ConvergedSystem 100 for HDI
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of
an HP approved configurator. Contact your local sales representative for additional information.
HP SL Advanced Power
The SL Advanced Power Manager is an optional rack level solution for the HP Moonshot
1500 Chassis which enables server-level DC (or hardware) power on and off and serverManager
level monitoring. In addition, the SL APM will automatically discover SL hardware
components which are connected into the SL APM solution.
The SL APM does not replace rack PDUs, but is designed to enable the utilization of
basic, low cost, rack PDUs while providing the functionality of 'switched' PDUs which
provide hardware power on/off of individual servers by turning off the AC power to the
power supplies of a given server. Because the SL servers and Moonshot servers share
power supplies to optimize power efficiency, using 'switched' PDUs to turn off the
power supplies in the chassis will result in the loss of all servers in that chassis. The SL
APM solves this by allowing server-level hardware power on/off of the DC power to the
individual server motherboards.
HP SL Advanced Power Manager Kit
538084-B21
HP SL Advanced Power Manager Distribution Module Kit
620002-B21
High Performance
Clusters
HP Insight Cluster Management Utility Media
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
BD477A
Ethernet Optical
Transceivers
HP X140 40G QSFP+ MPO SR4 Transceiver
JG325A
Ethernet Copper Cables
HP X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable
HP X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable
HP X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable
HP X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable
HP X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable
HP X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable
NOTE: The transceivers and cables listed above have been qualified and certified to
work with this product. Transceiver and DAC cables from any manufacturer may be
accepted, but they will not be supported by HP.
JG326A
JG327A
JG328A
JG329A
JG330A
JG331A
DA - 14819 Worldwide — Version 3 — March 31, 2014
Page 11
QuickSpecs
HP ConvergedSystem 100 for HDI
Additional Options
HP Uninterruptible Power HP Rack-mountable UPS
Systems
HP R1500 G3 Uninterruptible Power Supply (UPS)
HP Basic Power
Distribution Units
HP R1.5kVA G3 1U NA Uninterruptible Power System
HP R1.5kVA G3 1U JP/TW Uninterruptible Power System
HP R1.5kVA G3 1U INTL Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14059_div/14059_div.html
(Worldwide)
HP R/T3000 G2 Uninterruptible Power System (UPS)
AF469A
AF470A
AF471A
HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System
HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System
AF466A
AF467A
HP R/T3000 G2 2U Detachable Cord High Voltage INTL Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14110_div/14110_div.html
(Worldwide)
NOTE: For additional information on HP Uninterruptible Power Systems please go to:
www.hp.com/servers/rackups.
NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com.
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and
Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That
link will list cable descriptions, requirements, and specifications for UPS and PDU units.
Please see the following link: www.hp.com/products/powercords.
AF468A
HP 2.8kVA 120 Volt 18 Outlet NA/JP Basic Power Distribution Unit
HP 3.6kVA 200-240 Volt 12 Outlet WW Basic Power Distribution Unit
HP 3.6kVA 200-240 Volt 20 Outlet WW Basic Power Distribution Unit
HP 4.9kVA 208 Volt 20 Outlet NA/JP Basic Power Distribution Unit
HP 4.9kVA 208 Volt 30 Outlet NA/JP Basic Power Distribution Unit
HP 8.3kVA 208 Volt 36 Outlet NA/JP Basic Power Distribution Unit
HP 8.6kVA 208 Volt Three Phase 18 Outlet NA/JP Basic Power Distribution Unit
HP 8.6kVA 208 Volt Three Phase 30 Outlet NA/JP Basic Power Distribution Unit
HP 5.7kVA 208 Volt Three Phase 27 Outlet NA/JP Dual Voltage Basic Power Distribution
Unit
HP 8.6kVA 208 Volt Three Phase 30 Outlet NA/JP Dual Voltage Basic Power Distribution
Unit
HP 7.3kVA 230 Volt 20 Outlet INTL Basic Power Distribution Unit
HP 7.3kVA 230 Volt 30 Outlet INTL Basic Power Distribution Unit
HP 11kVA 230 Volt 36 Outlet INTL Basic Power Distribution Unit
HP 11kVA 400 Volt Three Phase 30 Outlet INTL Basic Power Distribution Unit
HP Hardwired 200-240 Volt 36 Outlet WW Basic Power Distribution Unit
HP 13.2kVA 480 Volt Three Phase 15 Outlet NA Basic Power Distribution Unit
HP 277 Volt options for H3X07A and H3X08A
H5M55A
H5M56A
H5M57A
H5M58A
H5M59A
H5M60A
H5M61A
H5M62A
H5M63A
DA - 14819 Worldwide — Version 3 — March 31, 2014
H5M64A
H5M68A
H5M70A
H5M71A
H5M72A
H5M75A
H3X07A
Page 12
QuickSpecs
HP ConvergedSystem 100 for HDI
Additional Options
HP 800VA - 277V Input / 230V Output NA Rack Mount Transformer
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14557_div/14557_div.html
(Worldwide)
NOTE: Additional HP Power Distribution Units are available. For a complete list of all HP
PDUs and additional information please visit: www.hp.com/go/rackandpower.
HP Intelligent Power
iPDU Core Units
Distribution Units (iPDU) HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 8.3kVA 40A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 17.3kVA 48A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 7.3kVA 32A Single Phase INTL Core Intelligent Modular Power Distribution Unit
HP 11kVA 16A Three Phase INTL Core Intelligent Modular Power Distribution Unit
HP 22kVA 32A Three Phase INTL Core Intelligent Modular Power Distribution Unit
HP 14.4kVA 40A Three Phase NA/JP Intelligent Modular Power Distribution Unit
iPDU Extension Bars
HP 5xC13 Intelligent PDU Extension Bar G2 Kit
HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13650_div/13650_div.html
(Worldwide)
HP Rack Series
H3X09A
AF520A
AF521A
AF522A
AF523A
AF525A
AF526A
AF527A
AF533A
AF547A
AF528A
HP Intelligent Series Rack
HP 636 1200mm Pallet Intelligent Series Rack
HP 636 1200mm Shock Intelligent Series Rack
HP 642 1200mm Pallet Intelligent Series Rack
HP 642 1200mm Shock Intelligent Series Rack
HP 647 1200mm Pallet Intelligent Series Rack
HP 647 1200mm Shock Intelligent Series Rack
NOTE: Rack chosen is required to have 1200mm to provide space for cable
management arm at the rear of the chassis and host PDU in the rear of the rack.
NOTE: Please see the QuickSpecs for Technical Specifications such as height, width,
depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/14223_div/14223_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.
DA - 14819 Worldwide — Version 3 — March 31, 2014
BW899A
BW900A
BW907A
BW908A
BW913A
BW914A
Page 13
QuickSpecs
HP ConvergedSystem 100 for HDI
Additional Options
HP Rail Kits
(Chassis Specific)
HP 4.3U Server Rail Kit
HP 0.66U Spacer Blank Kit
NOTE: For data center airflow management purposes, it is recommended that either
the .66U Spacer Blank or the 13U FIO Rack Adapter Kit can be ordered.
NOTE: The HP 4.3U Rail Kit is required to be ordered for every chassis to properly install
the chassis into a rack.
NOTE: The .66U Spacer Blank kit may be ordered and will give an even 5U (4.3U+0.66U)
spacing in a rack. This would enable installing up to 8 chassis in a 42U rack. It is also
possible to stack up to 9 chassis in a 42U rack using the 13U FIO Rack Adapter Kit. (see
Step 3 of Factory Integrated Models section). If the 13U kit is used, the .66U spacer
would not be used and vice versa.
681254-B21
681260-B21
HP Rack Adapter
HP 13U FIO Rack Adapter Kit for 3X4.3U Chassis
NOTE: Group the HP Moonshot 1500 Chassis units into a 13U space. Order one per three
chassis. The 0.66U spacer is not used when selecting this option. Utilizing HP Factory
Express Services for this part is highly recommended.
681677-B21
DA - 14819 Worldwide — Version 3 — March 31, 2014
Page 14
QuickSpecs
HP ConvergedSystem 100 for HDI
Technical Specifications
HP CS100 for HDI
HP Moonshot System contains up to forty-five (45) Server Cartridges, Four (4) Power Supplies, Two
(2) Switch Module Kits and Two (2) uplink Module Kits
HP Moonshot 1500
Chassis Dimensions
(H x W x D)
7.47 x 17.45 x 35.34in (18.96 x 44.33 x 89.97cm)
NOTE: Rack chosen is required to have 1200mm to provide space for cable
management arm at the rear of the chassis and host PDU in the rear of the
rack.)
Weight
Maximum
180 lbs.
(all server cartridges,
(approximate)
power supplies, one switch
and one uplink installed)
Network Ports (per switch One hundred eighty (180) 10/100/1000 downlink ports
Four (4) 1000/10000/40000 QSFP+ uplink ports
& uplink pair)
NOTE: See the HP Moonshot-180G Switch Module QuickSpecs for Technical
Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/14731_div/
14731_div.html
NOTE: See the HP Moonshot-4QSFP+ Uplink Module QuickSpecs for Technical
Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/14733_div/
14733_div.html
Input Requirements
Rated Line Voltage
180 to 264 VAC
(per power supply)
Rated Input Current
3.6A at 230VAC
Rated Input Frequency
47 to 63 Hz
Rated Input Power
840.72W (at 200 VAC)
Power Specifications
To review typical system power ratings use the HP Power Advisor which is
available via the online tool located at URL:
www.hp.com/go/hppoweradvisor
Power Supply Output (per Rated Steady-State Power 653.08W (at 200 VAC)
power supply)
Operating
50° to 95° F (10° to 35° C) at sea level with an
altitude derating of 1.8°F per every 1000 ft (1.0°C
per every 304.8 m) above sea level to a maximum
of 10,000 ft (3048 m), no direct sustained
sunlight. Maximum rate of change is 18°F/hr
(10°C/hr). The upper limit may be limited by the
type and number of options installed.
System performance may be reduced if operating
with a fan fault or above 86°F (30°C).
Non-operating
-22° to 140° F (-30° to 60° C)
Maximum rate of change is 36°F/hr (20°C/hr).
Relative Humidity
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non(non-condensing)
condensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, noncondensing.
DA - 14819 Worldwide — Version 3 — March 31, 2014
Page 15
QuickSpecs
HP ConvergedSystem 100 for HDI
Technical Specifications
Altitude
Operating
Acoustic Noise
10,000 ft (3048 m). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 1500
ft/min (457 m/min).
Non-operating
30,000 ft (9144 m). Maximum allowable altitude
change rate is 1500 ft/min (457 m/min).
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions were
measured in accordance with ISO 7779 (ECMA 74) and declared in accordance
with ISO 9296 (ECMA 109).
Idle
L WAd
7.1 Bels
L pAm
54 dB
L WAd
7.3 Bels
L pAm
57 dB
Operating
Server Cartridge
Emissions Classification
(EMC)
FCC Rating
Class A
HP Moonshot m700
Server Cartridge
Dimensions
(H x W x D)
6.57 in x 7.23 in x 0.78 in (16.71 cm x 18.37 cm x 1.98cm)
Idle Power
20W
Max Power
63W
Typical Power
33W
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15;
ICES-003; CNS13438; K22;K24; EN 61000-3-2; EN
61000-3-3; EN 60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and statements.
DA - 14819 Worldwide — Version 3 — March 31, 2014
Page 16
QuickSpecs
HP ConvergedSystem 100 for HDI
Technical Specifications
Environment-friendly
Products and Approach
End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
and Recycling
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may be
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are
trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 14819 Worldwide — Version 3 — March 31, 2014
Page 17
Download PDF
Similar pages