Twisted Pair Patch Cable - Category 6 Class E

Twisted Pair Patch Cable - Category 6 Class E - S/FTP
✔ LSZH (Low Smoke Zero Halogen)
✔ Red colored plug for CAT 6
✔ Kink prot., strain relief, latch prot.
✔ various lengths and colors available
Abstract
CAT 6 Class E, S/FTP, Twisted Pair Patch Cable, Cu, LSZH, AWG 27/7, various lengths and colors available
Features
- 2x RJ45 (8P8C) connectors
- Boots with kink protection, strain relief and latch protection
- Length marking on boot
- Conductor: Cu (Copper)
- Shielding: S/FTP (complete braid shielding, pairs foil shielded)
- Structure: 4x 2 AWG 27/7, twisted pair
- Sheath: LSZH (Low Smoke Zero Halogen)
- PoE+ ready
Product Overview
The DIGITUS® Category 6 Class E patch cables are manufactured and tested to the ISO/IEC 11801 and
DIN EN 50173 Category 6 specifications. They will guarantee the installed cabling system is compliant
with the ISO & EN channel specification requirements and will provide optimum performance levels
of DIGITUS® Category 6 cabling. The performance is tested up to 250 MHz inclusive performance
characteristics such as near end cross talk (“NEXT”).
DIGITUS® patch cables are designed and produced to fulfill the highest requirements of various
application areas in full volume.
Each cable is fitted with a molded boot which comes with kink protection and strain relief.
Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking.
You can easily identify the Category 6, because of the transparent red colored connector.
Patch Cable Matrix and Configuration
Patch cables can be wide-ranging. Therefore we prepared
a complete overview of our range, which guides you
to the cable you require.
One E-Mail or one call will be enough and we will send
you the latest version as a PDF file.
You can also check our Patch Cable Configuration tool
on our website www.digitus-professional.com
Performance- and Specification Overview
Conductor
Insulations
Outer sheath
Overall diameter
Bending radius
RJ45 connector
Color code
Wiring standard
Pin assignment
Durability
Contact resistance
Resistance unbalance
Dielectric strength
Uninsulated resistance
Operating temperature
NVP
Flame retardancy
Smoke emission
Typical applications
Norms
Colors
Marking
Stranded AWG 27/7 bare copper, 0.127 ± 0.005 mm
FO-PE (Foamed Polyethylene)
LSZH (Low Smoke Zero Halogen)
5.7 mm ± 0.30 mm
15x OD
3 μ nominal gold flash over 60 μ nickel undercoat contact pins
Orange x White, Green x White, Blue x White, Brown x White
EIA/TIA 586B
1:1
750 insertion cycles
30 mΩ maximum
3% maximum
2500 VDC for 3 seconds
150 MΩ/km minimum
-20 °C up to +60 °
76%
IEC 60332-1
IEC 61034
IEEE 802.3: 10BASE-T; 100BASE-T; 1000BASE-T
ISO/IEC 11801-1; EN-50173; ANSI/TIA 568-C; EN 60603-7-5
Various colors available on request
Brand name, cable length and cable information
Transmission Properties
Freq.
MHz
1.00
10.00
20.00
25.00
62.50
100.00
200.00
250.00
Insertion
Loss
dB
4.00
6.60
9.30
10.50
16.90
21.70
31.70
35.90
NEXT
RL
ACR-N
ACR-F
PS NEXT
PS ACR-N
PS ACRF
dB
65.00
56.60
51.60
50.00
43.40
39.90
34.80
33.10
dB
19.00
19.00
17.50
17.00
14.00
12.00
9.00
8.00
dB
61.00
50.00
42.30
39.60
26.50
18.20
3.10
-2.80
dB
63.30
43.30
37.20
35.30
27.30
23.30
17.20
15.30
dB
62.00
54.00
49.00
47.30
40.60
37.10
31.90
30.20
dB
58.00
47.40
39.70
36.90
23.70
15.40
0.10
-5.80
dB
60.30
40.30
34.20
32.30
24.30
20.30
14.20
12.30
The results of the chart above are typical for Category 6, Class E patch cables 2 m, 5 m up to 10 m length
Product Number Information
Length Tolerances
Length (m)
0.15
0.25
0.5
0.75
1
1.5
2
2.5
3
4
5
6
7
7.5
Technical Drawing
Tolerance (mm)
+20/-6
+20/-6
+20/-10
+20/-13
+/-20
+/-30
+/-40
+/-50
+/-60
+/-90
+/-110
+/-120
+/-140
+/-150
Length (m)
8
10
12
13
15
20
25
30
40
50
70
75
100
Tolerance (mm)
+/-155
+/-200
+/-250
+/-270
+/-310
+/-400
+/-500
+/-630
+/-840
+/-1000
+/-1300
+/-1500
+/-1800
*The cable length is measured from plug A to plug B
Download PDF
Similar pages