Contents
Connections
Playback
Settings
Tips
Appendix
.
AV Surround Receiver
SR7010
Owner’s Manual
Front panel
Display
Rear panel
1
Remote
Index
Contents
Connections
Playback
Upgrade
Accessories
Inserting the batteries
Operating range of the remote control unit
Features
High quality sound
High performance
Easy operation
Part names and functions
Front panel
Display
Rear panel
Remote control unit
Settings
Front panel
Display
Rear panel
Appendix
8
9
10
10
11
11
14
17
18
18
23
27
31
Connecting a playback device
Connecting a set-top box (Satellite tuner/cable TV)
Connecting a DVD player or Blu-ray Disc player
Connecting a video camcorder or game console
Connecting a turntable
Connecting a device with a multi-channel output connector
Connecting an iPod or USB memory device to the USB port
Connecting an HD Radio antenna
Connecting to a home network (LAN)
Wired LAN
Wireless LAN
Connecting an external control device
REMOTE CONTROL jacks
DC OUT jacks
Connecting the power cord
36
36
46
50
83
Playback
Connections
Connecting speakers
Speaker installation
Speaker connection
Speaker configuration and “Amp Assign” settings
Connecting a TV
Connection 1 : TV equipped with an HDMI connector and
compatible with the ARC (Audio Return Channel)
Connection 2 : TV equipped with an HDMI connector and
incompatible with the ARC (Audio Return Channel)
Connection 3 : TV equipped without an HDMI connector
Tips
Basic operation
Turning the power on
Selecting the input source
Adjusting the volume
Turning off the sound temporarily (Muting)
Playback a DVD player/Blu-ray Disc player
84
85
86
2
Remote
Index
87
88
89
90
91
92
93
95
97
97
98
99
99
100
101
103
103
103
104
104
104
Contents
Connections
Playback
Playing an iPod
Listening to music on an iPod
iPod Browse Mode settings
Performing repeat playback
Performing random playback
Playing a USB memory device
Playing files stored on USB memory devices
Listening to music on a Bluetooth device
Playing music from Bluetooth device
Pairing with other Bluetooth devices
Reconnecting to this unit from a Bluetooth device
Listening to an HD Radio™ stations
Listening to an HD Radio broadcast
Tuning in by entering the frequency (Direct Tune)
Changing the tune mode (Tune Mode)
Selecting an audio program
Tuning in to stations and presetting them automatically (Auto
Preset Memory)
Presetting the current broadcast station (Preset Memory)
Listening to preset stations
Specify a name for the preset broadcast station (Preset Name)
Skipping preset broadcast stations (Preset Skip)
Cancelling Preset Skip
Checking the HD Radio reception information
Front panel
Display
Rear panel
Settings
105
106
107
109
109
110
111
113
114
116
117
118
120
122
122
123
Tips
Appendix
Listening to Internet Radio
Listening to Internet Radio
Playing the last played Internet Radio station
Using vTuner to add Internet Radio stations to favorites
Playing back files stored on a PC and NAS
Applying media sharing settings
Playing back files stored on a PC and NAS
Listening to Pandora®
Listening to Pandora®
Creating a new station
Listening to an existing station
Listening to created radio stations at random
Giving feedback and managing stations
Sign Out
Listening to SiriusXM Internet Radio
Listening to SiriusXM Internet Radio
Sign Out
123
124
124
125
126
127
128
3
Remote
Index
129
130
131
132
133
134
135
137
138
140
141
141
142
143
144
145
146
Contents
Connections
Playback
AirPlay function
Playing songs from your iPhone, iPod touch or iPad
Playing iTunes music with this unit
Selecting multiple speakers (devices)
Perform iTunes playback operations with the remote control unit
of this unit
Spotify Connect function
Playing Spotify music with this unit
Convenience functions
Performing repeat playback
Performing random playback
Registering to Favorites
Playing back content added to the “Save to Favorites”
Deleting content added to favorites
Searching content with keywords (Text Search)
Playing back music and a favorite picture at the same time
(Slideshow)
Setting the Slideshow Interval
Adjusting the volume of each channel to match the input source
(Channel Level Adjust)
Adjusting the tone (Tone)
Displaying your desired video during audio playback (Video
Select)
Adjusting the picture quality for your viewing environment (Picture
Mode)
Playing the same music in all zones (All Zone Stereo)
Front panel
Display
Rear panel
Settings
147
148
148
149
Tips
Appendix
Selecting a sound mode
Selecting a sound mode
Direct playback
Pure Direct playback
Auto surround playback
HDMI control function
Setting procedure
Smart Menu function
Sleep timer function
Using the sleep timer
Smart select function
Calling up the settings
Changing the settings
Web control function
Controlling the unit from a web control
Panel lock function
Disabling all key button operations
Disabling all button operations except VOLUME
Canceling the Panel lock function
Remote lock function
Disabling the sensor function of the remote control unit
Enabling the remote sensor function
Switches light illumination on/off
Playback in ZONE2/ZONE3 (Separate room)
Connecting ZONE
Playback in ZONE2/ZONE3
149
150
150
151
152
152
153
153
154
154
155
156
157
158
159
160
161
4
Remote
Index
162
163
164
164
165
177
177
178
180
181
182
183
184
185
185
187
187
187
188
189
189
189
190
191
191
196
Contents
Connections
Playback
Settings
Settings
Front panel
Inputs
Input Assign
Source Rename
Hide Sources
Source Level
Input Select
Speakers
Audyssey® Setup
Procedure for speaker settings (Audyssey® Setup)
Error messages
Retrieving Audyssey® Setup settings
Manual Setup
Amp Assign
Speaker Config.
Distances
Levels
Crossovers
Bass
Front Speaker
2ch Playback
198
201
202
203
204
204
204
205
210
211
211
212
216
219
219
221
227
231
231
232
Menu map
Menu operations
Inputting characters
Using the keyboard screen
Audio
Dialog Level Adjust
Subwoofer Level Adjust
Surround Parameter
M-DAX
Audio Delay
Volume
Audyssey®
Graphic EQ
Video
Picture Adjust
HDMI Setup
Output Settings
Component Video Out
On Screen Display
TV Format
Display
Rear panel
Tips
5
Remote
Index
Appendix
233
233
235
236
236
237
238
238
240
246
248
249
249
257
263
264
265
266
267
267
Contents
Connections
Playback
270
270
270
271
274
276
276
277
278
279
279
279
282
284
284
285
285
287
289
290
291
Network
Information
Connection
Wi-Fi Setup
Settings
Network Control
Friendly Name
Diagnostics
Maintenance Mode
General
Language
ECO
ZONE2 Setup/ZONE3 Setup
Zone Rename
Smart Select Names
Trigger Out 1/Trigger Out 2
Front Display
Firmware
Information
Usage Data
Setup Lock
Front panel
Display
Settings
Rear panel
Tips
Appendix
Operating external devices with the remote control unit
Registering preset codes
Operating devices
Checking registered preset codes
Initializing registered preset codes
Operating learning function
Remembering remote control codes from other devices
Delete saved remote control codes
Setting the back light
Disabling the backlight
Turning the backlight on
Specifying the zone used with the remote control unit
6
Remote
Index
292
293
297
300
300
301
302
303
304
304
304
305
Contents
Connections
Playback
Settings
Tips
Tips
307
309
327
Tips
Troubleshooting
Resetting factory settings
Appendix
About HDMI
Video conversion function
Playing back a USB memory devices
Playing back a Bluetooth device
Playing back a file saved on a PC or NAS
Playing back Internet Radio
Personal memory plus function
Last function memory
Sound modes and channel output
Sound modes and surround parameters
Types of input signals, and corresponding sound modes
Explanation of terms
Trademark information
Specifications
Index
License
Front panel
Display
Rear panel
328
331
333
334
335
336
336
336
337
339
343
347
357
360
366
369
7
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Upgrade
Upgrade (Auro-3D)
The text marked with this symbol that will enable after the upgrade of the Auro-3D.
You can experience the best performance of Auro-3D if you install Front Height and Surround Height in addition to standard 5.1-channel. The “Setup
Assistant” will lead you to this setting.
You can use Rear Height speakers from a Dolby Atmos speaker setup instead of Surround Height speakers for Auro-3D playback.
The AVR also can play Auro-3D using standard 5.1-channel and Front Height speakers. If you install any height speakers instead of Surround Height
speakers and Rear Height speakers, you can set the speaker configuration in setup menu.
Auro-3D
Audio
Features
High quality sound
13
45
Speaker configuration and “Amp Assign” settings
51
Auro-3D 9.1/10.1-channel system
Amp Assign
Sound mode that can be selected for each input signal
175
Front panel
Display
Rear panel
253, 256
Speaker Config.
262
Appendix
Selecting a sound mode
168
237
Manual Setup
65, 71
Description of sound mode types Auro-3D sound mode
208
Decode Mode
38, 41
Layout including height speakers and top speakers
208
Auro-Matic 3D Strength
Inputs
Connecting speakers
Speaker installation
Auro-Matic 3D Preset
Sound modes and channel output
8
338
Sound mode and surround parameters
341
Types of input signals, and corresponding sound modes
345
Explanation of terms
348
Trademark information
359
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Thank you for purchasing this Marantz product.
To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading this manual, be sure to keep it for future reference.
Accessories
.
Check that the following parts are supplied with the product.
Quick Start Guide
Safety Instructions
Notes on radio
Warranty
(for USA/for CANADA)
Cable labels
Power cord
FM indoor antenna
AM loop antenna
Sound calibration
microphone
(ACM1HB)
Sound calibration
microphone stand
Remote control unit
(RC026SR)
R03/AAA batteries
External antennas for
Bluetooth/wireless
connectivity
Front panel
Display
Rear panel
9
Remote
Index
Connections
Contents
Playback
Settings
Inserting the batteries
1
Tips
Appendix
NOTE
0 To prevent damage or leakage of battery fluid:
0 Do not use a new battery together with an old one.
0 Do not use two different types of batteries.
0 Remove the batteries from the remote control unit if it will not be in use for long
periods.
0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery
compartment and insert new batteries.
Remove the rear lid in the direction of the arrow and
remove it.
Operating range of the remote control
unit
.
Point the remote control unit at the remote sensor when operating it.
2
Insert two batteries correctly into the battery
compartment as indicated.
R03/AAA batteries
Approx. 23 ft/7 m
.
30°
Put the rear cover back on.
.
3
Front panel
Display
Rear panel
10
Remote
Index
30°
Contents
Connections
Playback
Settings
Tips
Appendix
Features
0 DTS:X
High quality sound
This unit is equipped with the DTS:X decoder technology. DTS:X
brings the home theater experience to new heights with its immersive
object based audio technology which removes the bounds of channels.
The flexibility of objects allows for sound to be scaled large or small
and moved around the room with greater accuracy than ever before
leading to a richer immersive audio experience.
0 With discrete circuit technology, the power amplifier provides
identical quality for all 9-channels (165 Watts x 9-channels)
For optimum realism and stunning dynamic range, the power amplifier
section features discrete power devices (not integrated circuitry).
By using high current, high power discrete power devices, the amplifier
is able to easily drive high quality speakers.
0 Audyssey DSX® (v p. 215)
This unit is equipped with Audyssey DSX® processor. By connecting
front height speakers to this unit and playing back with Audyssey DSX®
processing you can experience a more vertically expansive front
soundstage. By connecting two front wide speakers, you can
experience a wider and more expanded front soundstage.
0 Current feedback amplifier
This unit uses a high-speed current feedback amplifier circuit for its
preamplifier so that signals from a Blu-ray Disc player and other
equipment that support high-definition audio formats can be amplified
with high fidelity. The high-speed current feedback amplifier also
reproduces a natural sound space.
0 Audyssey LFC™ (Low Frequency Containment) (v p. 215)
Audyssey LFC™ solves the problem of low frequency sounds
disturbing people in neighboring rooms or apartments. Audyssey
LFC™ dynamically monitors the audio content and removes the low
frequencies that pass through walls, floors and ceilings. It then applies
psychoacoustic processing to restore the perception of low bass for
listeners in the room. The result is great sound that no longer disturbs
the neighbors.
0 Dolby Atmos (v p. 349)
This unit is equipped with a decoder that supports Dolby Atmos audio
format. The placement or movement of sound is accurately reproduced
by the addition of overhead speakers, enabling you to experience an
incredibly natural and realistic surround sound field.
Front panel
Display
Rear panel
11
Remote
Index
Contents
Connections
Playback
Settings
Tips
0 Discrete subwoofers and Audyssey Sub EQ HT™ (v p. 239)
The unit has two subwoofer output capability and can adjust the level
and delay for each subwoofer individually.
Audyssey Sub EQ HT™ makes the integration seamless by first
compensating for any level and delay differences between the two
subwoofers and then applying Audyssey MultEQ® XT32 to both
subwoofers together for improved deep bass response and detail.
Front panel
Display
Rear panel
12
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Upgrade (Auro-3D)
0 Auro-3D
This unit is equipped with an Auro-3D decoder.
With Auro-3D, Front Height (FHL+FHR), Surround Height (SHL+SHR) and Top Surround (TS/optional) are added to a conventional 5.1-channel
system to achieve a natural and realistic sound field that is three-dimensional and fully immersive.
After performing the Auro-3D upgrade you will be able to fully enjoy Auro-3D playback if you properly place the speakers for Auro-3D.
2Auro-3D playback
2Dolby Atmos playback
TS
TS
FHL
SHL
FHR
FL
FR
C
FHR
FL
SR
SL
SW
SHR
FR
C
SR
.
SW
FHL
SHL
.
SL
SHR
0 Auro-3D does not support a Dolby Atmos configuration using Top Front, Top Middle, Top Rear, or any Dolby Atmos Enabled speakers.
If you are using these speakers and want to take full advantage of the Auro-3D Upgrade, you need to relocate them to Front Height and Surround Height speaker locations as
shown above.
But it is possible to support both an Auro-3D and Dolby Atmos by adding Front Height and Rear Height speakers* to a 5.1 configuration.
z For an optimum Auro-3D experience Surround Height speakers are strongly recommended.
Front panel
Display
Rear panel
13
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
0 Digital video processor upscales analog video signals (SD
High performance
resolution) to HD (720p/1080p) and 4K (v p. 229)
0 4K 60Hz input/output supported
4K
Up scaling
.
Up to 1080p
.
This unit is equipped with a 4K video upscaling function that allows
analog video or SD (Standard Definition) video to be output via HDMI at
4K (3840 × 2160 pixels) resolution. This function enables the device to
be connected to a TV using a single HDMI cable, and produces high
definition images for any video source.
0 Equipped with HDMI ZONE2 output (v p. 191)
The ZONE2 multi-room output includes an HDMI output that lets you
enjoy a different A/V source in that room, with another program playing
in the main room.
When 4K Ultra HD (High Definition) is used, an input/output speed of 60
frames per second (60p) is achieved for video signals. When connected
to 4K Ultra HD and 60p video signal input compatible TV, you can enjoy
the sense of realism only available from high-definition images, even
when viewing fast-moving video.
This unit also supports image processing for 4K 60p, 4:4:4 and 24-bit
videos. By processing the video at the original resolution, this unit lets
you enjoy flawless, high-definition picture quality.
0 HDCP 2.2
This unit is compatible with HDCP 2.2 copyright protection standard.
Front panel
Display
Rear panel
14
Remote
Index
Contents
Connections
Playback
Settings
0 HDMI connections enable connection to various digital AV
Tips
Appendix
0 The device is equipped with a AirPlay® function in addition to
devices (8 inputs, 3 outputs)
network functions such as Internet radio etc. (v p. 147)
8 3
Out
.
.
In
You can enjoy a wide variety of content, including listening to Internet
Radio, playing audio files stored on your PC, and displaying
photographs stored on your PC on our television.
This unit also supports Apple AirPlay which lets you stream your music
library from an iPhone®, iPad®, iPod touch® or iTunes®.
For connection to a broad range of digital sources, this unit features 8
HDMI inputs, including 1 on the front panel that lets you quickly and
conveniently connect a camcorder, game console or other HDMIequipped device. There are dual HDMI outputs for the main room, and a
third HDMI output for another room.
0 Playback of DSD and FLAC files via USB and networks
This unit supports the playback of high resolution audio formats such as
DSD (2.8 MHz) and FLAC 192 kHz files. It provides high quality
playback of high resolution files.
Front panel
Display
Rear panel
15
Remote
Index
Contents
Connections
Playback
Settings
0 Wireless connection with Bluetooth devices can be carried out
Tips
Appendix
0 Multi-Room audio (v p. 161)
easily (v p. 113)
【MAIN ZONE】
.
【ZONE2】/【ZONE3】
.
You can select and play back the respective inputs in MAIN ZONE,
ZONE2 and ZONE3.
In addition, when the All Zone Stereo function is used, the music being
played back in MAIN ZONE can be enjoyed in all the zones at the same
time. This is useful when you want to let the BGM propagate throughout
the whole house.
You can enjoy music simply by connecting wirelessly with your
smartphone, tablet, PC, etc.
0 Compatible with the “Marantz 2015 AVR Remote”z for performing
basic operations of the unit with an iPad, iPhone or Android™
devices (Google, Amazon Kindle Fire)
“Marantz 2015 AVR Remote” is application software that allows you to
perform basic operations with an iPad, iPhone, Android smartphone or
Android tablet such as turning the unit ON/OFF, controlling the volume,
and switching the source.
0 Energy-saving design
This unit is equipped with an ECO Mode function that allows you to
enjoy music and movies while reducing the power consumption during
use, and also an auto-standby function that automatically turns off the
power supply when the unit is not in use. This helps reduce
unnecessary power use.
z Download the appropriate “Marantz 2015 AVR Remote” for your iOS or Android
devices. This unit needs to be connected to the same LAN or Wi-Fi (wireless
LAN) network that the iPhone or iPod touch is connected to.
Front panel
Display
Rear panel
16
Remote
Index
Contents
Connections
Playback
Settings
Tips
Easy operation
0 “Setup Assistant” provides easy-to-follow setup instructions
First select the language when prompted. Then simply follow the
instructions displayed on the TV screen to set up the speakers, network,
etc.
0 Easy to use Graphical User Interface
This unit is equipped with a Graphical User Interface for improved
operability.
Front panel
Display
Rear panel
17
Remote
Index
Appendix
Connections
Contents
Playback
Settings
Tips
Appendix
Part names and functions
Front panel
q
w
e
r
t
y
.
u
Front panel
Display
Rear panel
18
Remote
Index
Contents
Connections
qw e
r t
Playback
Settings
y
Tips
Appendix
C INPUT SELECTOR knob
This selects the input source. (v p. 103)
D Main Display
This displays various pieces of information. (v p. 23)
E Remote control sensor
This receives signals from the remote control unit. (v p. 10)
.
F VOLUME knob
This adjusts the volume level. (v p. 104)
G Door
When you are using buttons and/or connectors behind the door, press
the bottom of the door to open it. Be careful not to catch your fingers
when closing the door.
u
A Power operation button (X)
Used to turn the power of the MAIN ZONE (room where this unit is
located) on/off (standby). (v p. 103)
Front panel
Display
Rear panel
.
B Power indicator
This is lit as follows according to the power status:
0 Off: Power on
0 Red: Normal standby
0 Orange:
0 When “HDMI Control” is set to “On” (v p. 223)
0 When “HDMI Pass Through” is set to “On” (v p. 224)
0 When “Network Control” is set to “Always On” (v p. 276)
19
Remote
Index
Contents
Connections
Playback
Settings
With the door open
qw
e r
t
y
u
Tips
Appendix
C M-DAX button/indicator
This enables the M-DAX mode. (v p. 210)
This lights when the M-DAX mode is selected.
io
D Dynamic Volume button (DYNAMIC VOL)
This switches the Dynamic Volume settings. (v p. 214)
E Sub display
This displays various pieces of information. (v p. 25)
F BACK button
This returns to the previous screen.
G Cursor buttons (uio p)
These select items.
H ENTER button
This determines the selection.
.
I SETUP button
This displays the menu on the TV screen. (v p. 201)
A DYNAMIC EQ button
This switches the Dynamic EQ settings. (v p. 213)
B PURE DIRECT button/indicator
This switches the sound mode between Direct, Pure Direct and Auto.
(v p. 164 – 165)
This lights when the Pure Direct mode is selected as the sound mode.
Front panel
Display
Rear panel
20
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
M Audyssey DSX® button (A-DSX)
This switches the Audyssey DSX® settings. (v p. 215)
N Speaker A/B switching button (SPKR A/B)
This sets the front speakers to use. (v p. 267)
Q0 Q1
O HDMI OUT button
This sets the HDMI monitor output. (v p. 222)
Q2 Q3 Q4 Q5 Q6 Q7
P DIMMER button
Each press of this switches the brightness of the display. (v p. 285)
.
Q STATUS button
Each press of this switches the status information that is shown on the
display.
J MOVIE button
This switches the sound mode to “Movie”. (v p. 163)
K MUSIC button
This switches the sound mode to “Music”. (v p. 163)
L GAME button
This switches the sound mode to “Game”. (v p. 163)
Front panel
Display
Rear panel
21
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
U Headphones jack (PHONES)
This is used to connect headphones.
When the headphones are plugged into this jack, audio will no longer
be output from the connected speakers or from the PRE OUT
connectors.
Q9
W0
Q8
NOTE
0 To prevent hearing loss, do not raise the volume level excessively when using
headphones.
W2
W3
W4
W5
V SETUP MIC jack
This is used to connect the supplied Sound calibration microphone.
(v p. 241)
W USB port (T)
This is used to connect USB storages (such as USB memory devices)
and the USB cable supplied with iPod. (v p. 93)
.
W1
R ZONE SELECT button
These switch the zone (MAIN ZONE, ZONE2, ZONE3) that is operated
through the remote control unit. (v p. 196, 201)
X AUX1 HDMI connector
This is used to connect HDMI output compatible devices such as video
camcorders and game consoles. (v p. 90)
S ZONE2 ON/OFF button
This turns the power of ZONE2 on/off. (v p. 196)
Y AUX1 INPUT connector
Used to connect analog output compatible devices such as video
camcorders and game consoles. (v p. 90)
T ZONE3 ON/OFF button
This turns the power of ZONE3 on/off. (v p. 196)
Front panel
Display
Rear panel
22
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Display
o Main Display
The input source name, sound mode, setting values and other information are displayed here.
n Standard display
n Tuner display
These light up according to the reception conditions when the input source
is set to “HD Radio”.
r t
.
q
w
e
Front panel
Display
Rear panel
.
A Light illumination
When the power to this device is switched on, the surrounding area is lit
blue. The settings can be changed so the light does not switch on.
(v p. 190)
B Volume indicator
C Input source indicator
The currently selected input source name is displayed.
If the input source name has been changed using “Source Rename” in
the menu, the input source name after the change is displayed.
(v p. 235)
D Lights up when the broadcast is properly tuned in.
E In the FM mode, this lights up when receiving stereo broadcasts.
23
Remote
Index
Contents
Connections
Playback
Settings
n Sleep timer indicator
Tips
Appendix
n ZONE2/ZONE3 power on display
.
u i
.
y
G This lights up when ZONE2 (separate room) power is turned on.
(v p. 196)
F This lights when the sleep mode is selected. (v p. 180)
H This lights up when ZONE3 (separate room) power is turned on.
(v p. 196)
Front panel
Display
Rear panel
24
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Sub Display
w
e
r
Q2
E Monitor output indicator
These light according to the HDMI monitor output setting. When set to
“Auto(Dual)”, the indicators light according to connection status.
C Audyssey® indicator
This lights when “MultEQ® XT32”, “Dynamic EQ”, “Dynamic Volume”,
“Audyssey DSX®” or “Audyssey LFCTM” is set. (v p. 212)
Rear panel
ui o
D Tuner reception mode indicators
These light up according to the reception conditions when the input
source is set to “HD Radio”.
TUNED: Lights up when the broadcast is properly tuned in.
STEREO: Lights up when receiving FM stereo broadcasts.
B Decoder indicators
These light when Dolby or DTS signals are input or when the Dolby or
DTS decoder is running.
Display
y
Q1
A Input signal indicators
The respective indicator will light corresponding to the input signal.
(v p. 237)
Front panel
t
Q0
.
q
F MULTI ZONE indicator
This lights up when ZONE2 or ZONE3 (separate room) power is turned
on. (v p. 196)
25
Remote
Index
Contents
Connections
Playback
Settings
.
When playing HD Audio sources, the A indicator lights when a
signal from an extension channel (a channel other than the front,
center, surround, surround back, front height, front wide or LFE
channel) is input.
Q1 Q2
G Sleep timer indicator
This lights when the sleep mode is selected. (v p. 180)
H MUTE indicator
This blinks while the sound is muted. (v p. 104)
I Volume indicator
J Information display
The input source name, sound mode, setting values and other
information are displayed here.
K Front speaker indicator
This lights according to the setting of the front A and B speakers.
Front panel
Display
Rear panel
Appendix
L Input/output signal channel indicators
The channel for input/output signals is displayed according to the
setting configured for “Channel Indicators”. (v p. 286)
0 When “Channel Indicators” is set to “Output” (Default)
These light when audio signals are being output from the speakers.
0 When “Channel Indicators” is set to “Input”
These light corresponding to the channels that include the input
signals.
ui o
Q0
Tips
26
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Rear panel
.
qw
Q2
Front panel
e
r
ty
Q3
u
i
Q4
Display
Rear panel
o
Q5
Q0
Q6
27
Remote
Q7
Index
q Q1
Contents
Connections
Playback
Settings
.
C Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
0 “Connection 2 : TV equipped with an HDMI connector and
incompatible with the ARC (Audio Return Channel)” (v p. 85)
0 “Connection 3 : TV equipped without an HDMI
connector” (v p. 86)
0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 88)
0 “Connecting a DVD player or Blu-ray Disc player” (v p. 89)
A Bluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for Bluetooth/wireless
connectivity when connecting to a network via wireless LAN, or when
connecting to a handheld device via Bluetooth. (v p. 98)
D RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner’s manual of the home
automation controller for more information about serial control of this
unit.
Perform the operation below beforehand.
A Place the external antennas for Bluetooth/wireless connectivity
evenly over the screw terminal of rear.
B Turn clockwise until the antennas is fully connected.
C Rotate the antenna upwards for best reception.
w
A Turn on the power of this unit.
B Turn off the power of this unit from the external controller.
C Check that the unit is in the standby mode.
e
.
q
Front panel
Display
Rear panel
Appendix
B DC OUT jacks
Used to connect devices equipped with the trigger function.
(v p. 100)
q
q w er
Tips
28
Remote
Index
Contents
Connections
o
Q0
Settings
J NETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN
network. (v p. 97)
F SIGNAL GND terminal
Used to connect a ground wire for the turntable. (v p. 91)
K AC inlet (AC IN)
Used to connect the power cord. (v p. 101)
G REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to operate this
unit and external devices from a different room. (v p. 99)
Display
Rear panel
Appendix
I HDMI connectors
Used to connect devices equipped with HDMI connectors.
0 “Connection 1 : TV equipped with an HDMI connector and
compatible with the ARC (Audio Return Channel)” (v p. 84)
0 “Connection 2 : TV equipped with an HDMI connector and
incompatible with the ARC (Audio Return Channel)” (v p. 85)
0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 88)
0 “Connecting a DVD player or Blu-ray Disc player” (v p. 89)
E FLASHER IN jack
Used when using a control BOX or other such control devices to control
this unit.
Front panel
Tips
H Video connectors (VIDEO)
Used to connect devices equipped with video connectors.
0 “Connection 3 : TV equipped without an HDMI
connector” (v p. 86)
0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 88)
0 “Connecting a DVD player or Blu-ray Disc player” (v p. 89)
Q1
.
ty u i
Playback
29
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
O Speaker terminals (SPEAKERS)
Used to connect speakers. (v p. 46)
P PRE OUT connectors
Used to connect a subwoofer with built-in amplifier or an external power
amplifier.
0 “Connecting the subwoofer” (v p. 47)
0 “Connecting ZONE” (v p. 191)
.
Q2
Q3
Q4
Q5
Q6
Q Component video connectors (COMPONENT VIDEO)
Used to connect devices equipped with component video connectors.
0 “Connection 3 : TV equipped without an HDMI
connector” (v p. 86)
0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 88)
0 “Connecting a DVD player or Blu-ray Disc player” (v p. 89)
Q7
L FM/AM antenna terminals (ANTENNA)
Used to connect FM antennas and AM loop antennas. (v p. 95)
NOTE
M Analog audio connectors (AUDIO)
Used to connect devices equipped with analog audio connectors.
0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 88)
0 “Connecting a DVD player or Blu-ray Disc player” (v p. 89)
0 Do not touch the inner pins of the connectors on the rear panel. Electrostatic
discharge may cause permanent damage to the unit.
N 7.1-channel input connectors (7.1CH IN)
Used to connect to a device that has multi-channel audio output
connectors. (v p. 92)
Front panel
Display
Rear panel
30
Remote
Index
Connections
Contents
Playback
Settings
Tips
Appendix
Remote control unit
q
w
e
r
q
w
e
A Display
A LEARN indicator
This is lit when setting the learning function for the remote control unit.
(v p. 301)
B Information display
0 This displays “AVR” when operating this unit.
0 This displays the input source name when operating an external
device.
0 This displays “TV” when operating TV.
C l indicator
This is lit when signals are sent from the remote control unit.
B AVR operation button
When preset codes are registered to the remote control unit, press this
button and then operate the menu on the unit.
C SET button
This is used for various settings on the remote control unit.
0 “Operating external devices with the remote control unit” (v p. 292)
0 “Operating learning function” (v p. 301)
0 “Setting the back light” (v p. 304)
0 “Specifying the zone used with the remote control unit” (v p. 305)
D ZONE SELECT button
These switch the zone (MAIN ZONE, ZONE2, ZONE3) that is operated
through the remote control unit.
0 “Playback in ZONE2/ZONE3” (v p. 196)
0 “Menu operations” (v p. 201)
Front panel
Display
Rear panel
31
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
E Device operation buttons (DEVICE X / DEVICE MENU)
These turn the power of external devices on/off and call up menus.
Preset codes need to be registered in order to use these buttons.
(v p. 293)
t
F Input source select buttons
These select the input source.
0 “Selecting the input source” (v p. 103)
0 “Playback in ZONE2/ZONE3” (v p. 196)
y
G SLEEP button
This sets the sleep timer. (v p. 180)
u
H Channel/page search buttons (CH/PAGE df)
These select radio stations registered to presets or switch pages.
(v p. 124)
i
o
Q0
Q1
Q2
I ECO Mode button
This switches to ECO Mode. (v p. 279)
J Information button (INFO)
This displays the status information on the TV screen. (v p. 290)
K Cursor buttons (uio p)
These select items.
L BACK button
This returns to the previous screen.
Front panel
Display
Rear panel
32
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
M HOME button
This takes you to the Home screen (Top screen) when the input source is
Online Music or iPod/USB. (v p. 107)
Q8
N System buttons
These perform playback related operations.
Tuning up / Tuning down buttons (TUNE +, –)
These select either FM broadcast or AM broadcast. (v p. 120)
Q9
O SMART SELECT buttons (1 - 4)
These call up settings registered to each button, such as input source,
volume level and sound mode settings. (v p. 182)
P SOUND MODE buttons
These select the sound mode. (v p. 162)
Q Number buttons
These enter numbers into the unit. (v p. 120)
R Remote control signal transmitter
This transmits signals from the remote control unit. (v p. 10)
S POWER button (X)
This turns the power on/off.
0 “Turning the power on” (v p. 103)
0 “Playback in ZONE2/ZONE3” (v p. 196)
Q3
Q4
Q5
Q6
Q7
Front panel
Display
Rear panel
33
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
T TV operation buttons (TV X / TV MENU / TV INPUT)
These turn the TV power on/off, switch the TV input and call up menus.
Preset codes need to be registered in order to use these buttons.
(v p. 297)
U Light button
This turns on the backlight for approx. 2 seconds. (v p. 304)
W0
V VOLUME buttons (df)
These adjust the volume level.
0 “Adjusting the volume” (v p. 104)
0 “Adjusting the volume (ZONE2/ZONE3)” (v p. 197)
W MUTE button (:)
This mutes the output audio.
0 “Turning off the sound temporarily (Muting)” (v p. 104)
0 “Turning off the sound temporarily (Muting) (ZONE2/
ZONE3)” (v p. 197)
W1
W2
W3
W4
W5
X OPTION button
This displays the option menu on the TV screen.
W6
Y ENTER button
This determines the selection.
Z SETUP button
This displays the menu on the TV screen. (v p. 201)
W5
Front panel
Display
Rear panel
34
Remote
Index
Contents
Connections
Playback
Settings
o Contents
Tips
Appendix
o Cables used for connections
Connecting a TV
83
Connecting a playback device
87
Connecting an iPod or USB memory device to the USB port
93
Connecting an HD Radio antenna
95
Connecting to a home network (LAN)
97
Connecting an external control device
99
Speaker cable
Subwoofer cable
HDMI cable
101
.
Connecting the power cord
Provide necessary cables according to the devices you want to
connect.
.
36
.
Connecting speakers
NOTE
Component video cable
.
0 Do not plug in the power cord until all connections have been completed.
However, when the “Setup Assistant” is running, follow the instructions in the
“Setup Assistant” (page 9 in the separate “Quick Start Guide”) screen for making
connections. (During “Setup Assistant” operation, the input/output connectors do
not conduct current.)
0 Do not bundle power cords together with connection cables. Doing so can result in
noise.
.
Video cable
.
Coaxial digital cable
.
Optical cable
L
L
R
R
.
Audio cable
.
LAN cable
Front panel
Display
Rear panel
35
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting speakers
Install speakers and connect them to this unit. (“Speaker installation” (v p. 36), “Speaker connection” (v p. 46))
Speaker installation
Determine the speaker system depending on the number of speakers you
are using and install each speaker and subwoofer in the room.
Speaker installation is explained using this example of a typical
installation.
SL
FWL
FL
FWR
SW2
SR
SW1
SB
SBR
.
SBL
Front panel
Display
Rear panel
Place the FRONT left and right speakers an
equal distance from the main listening position.
The distance between each speaker and your TV
should also be the same.
C
(Center speaker):
Place the CENTER speaker in between the front
speakers and above or below your TV.
Place the SURROUND left and right speakers an
SL/SR
equal distance to the left and right sides of the
(Surround speaker left/ main listening position. If you don’t have
surround back speakers, move the surround
right):
speakers slightly behind your listening position.
FR
C
FL/FR
(Front speaker left/
right):
36
SBL/SBR
(Surround back
speaker left/right):
Place the SURROUND BACK left and right
speakers an equal distance from the main
listening position and directly behind the main
listening position. When using a single surround
back speaker (SB), place it directly behind the
listening position.
FWL/FWR
(Front wide speaker
left/right):
Place the FRONT WIDE left and right speakers
outside of the front left and right speakers so that
there is an equal distance between all front
speakers.
SW 1/2
(Subwoofer) :
Place the SUBWOOFER at a convenient location
near the front speakers. If you have two
subwoofers, place them asymmetrically across
the front of your room.
Remote
Index
Contents
RHL
Connections
TRL
TML
TFL
FHL
TRR
TMR
TFR
Playback
Settings
Tips
Appendix
Place the FRONT HEIGHT left and right speakers
FHL/FHR
directly above the front speakers. Mount them as
(Front height speaker
close to the ceiling as possible and aim them
left/right):
towards the main listening position.
RHR
FHR
TFL/TFR
(Top front speaker
left/right):
Mount the TOP FRONT left and right speakers on
the ceiling slightly in front of your main listening
position and aligned with the left and right front
speakers.
.
TML/TMR
Mount the TOP MIDDLE left and right speakers
(Top middle speaker directly above the main listening position and
left/right):
aligned with the left and right front speakers.
TRL/TRR
(Top rear speaker
left/right):
Mount the TOP REAR left and right speakers on
the ceiling slightly behind your main listening
position and aligned with the left and right front
speakers.
Place the REAR HEIGHT left and right speakers
RHL/RHR
directly behind the main listening position. Mount
(Rear height speaker
them as close to the ceiling as possible and
left/right):
aligned with the left and right front speakers.
Front panel
Display
Rear panel
37
Remote
Index
Contents
Connections
Playback
Settings
Upgrade (Auro-3D)
TS
FHL
SHL
FHR
FL
SL
SHR
FR
SW
C
Tips
Appendix
SHL/SHR
(Surround height
speaker left/right):
Place the SURROUND HEIGHT left and right
speakers directly above the surround speakers.
TS
(Top surround
speaker):
Place the TOP SURROUND speaker directly
above the main listening position and aligned with
the center channel speaker.
SR
.
0 For the best Auro-3D experience Surround Height speakers are recommended,
however you may substitute Rear Height speakers from a Dolby Atmos speaker
setup in place of Surround Height speakers.
Front panel
Display
Rear panel
38
Remote
Index
Contents
Connections
FDL
Playback
Settings
Tips
About Dolby Atmos Enabled speakers
Dolby Atmos Enabled speakers reflect the sound off the ceiling to allow
the sound to come from over your head by using a special upwardpointing speaker that is placed on the floor.
You can enjoy the Dolby Atmos 3D sound even in an environment where
speakers cannot be installed on the ceiling.
FDR
SDL
SDR
BDR
.
BDL
Place the FRONT Dolby Atmos Enabled speaker
FDL/FDR
on the front speaker. For a Dolby Atmos Enabled
(Front Dolby speaker integrated with a front speaker, place the Dolby
Atmos Enabled speaker instead of the front
left/right):
speaker.
SDL/SDR
(Surround Dolby
speaker left/right):
.
Place the SURROUND Dolby Atmos Enabled
speaker on the surround speaker. For a Dolby
Atmos Enabled speaker integrated with a surround
speaker, place the Dolby Atmos Enabled speaker
instead of the surround speaker.
Place the BACK Dolby Atmos Enabled speaker on
BDL/BDR
the surround back speaker. For a Dolby Atmos
(Back Dolby speaker Enabled speaker integrated with a surround back
left/right):
speaker, place the Dolby Atmos Enabled speaker
instead of the surround back speaker.
Front panel
Display
Appendix
Rear panel
39
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Height speakers layout
DSX®,
0 This unit is compatible with Audyssey
Dolby Atmos and DTS:X which offers
an even wider and deeper surround sensation.
When using Audyssey DSX®, install front wide speakers or front height speakers.
0 Use the illustration below as a guide for how high each speaker should be
installed. The height does not need to be exactly the same.
FHL
Front speaker
z
5
z2 30° - 55°
z5 135° - 150°
SR
TRL
RHL
TRR
RHR
GViewed from the topH
Surround
speaker
z3 65° - 100°
.
z1 30° - 45°
z4 125° - 150°
SL
Surround
back
speaker
GViewed from the sideH
TMR
TML
Rear height
speaker
Point slightly
downwards
z1
Front wide
speaker
z4
TFR
C
.
z3
2
z
FR
FL
TFL
Top middle speaker
Top front speaker
Top rear speaker
Front height
speaker
Point slightly
downwards
FHR
Front panel
Display
Rear panel
40
Remote
Index
Contents
Connections
Playback
Settings
Tips
Upgrade (Auro-3D)
Height speakers layout
Front speaker
FHR
FHL
Top surround speaker
Surround
height speaker
FR
FL
C
z1
Front height
speaker
Point slightly
downwards
Appendix
SL
Surround
speaker
SHL
SR
TS
GViewed from the sideH
GViewed from the topH
.
.
z1 30° - 45°
0 For the best Auro-3D experience Surround Height speakers are recommended,
however you may substitute Rear Height speakers from a Dolby Atmos speaker
setup in place of Surround Height speakers.
Front panel
Display
Rear panel
41
Remote
Index
SHR
Contents
Connections
Playback
Settings
o When 7.1-channel speakers are installed using
surround back speakers
Tips
o When 9.1-channel speakers are installed using
front wide speakers
FR
FL
C
SW
z1
z2
FWL
z1
z3
z3
SL
Listening
position
FWR
z4
SR
SL
SR
SBR
SBL
SBR
.
.
SBL
FR
FL
SW C
z2
Appendix
z1:22°
- 30°
z2:90°
- 110°
z3:135°
z1:
- 150°
22° - 30°
z2:
55° - 60°
z3:
90° - 110°
0 When using a single surround back speaker, place it directly behind the listening
position.
Front panel
Display
Rear panel
42
Remote
Index
z4:
135° - 150°
Contents
Connections
Playback
Settings
Tips
o When 5.1-channel speakers are installed
FL
FR
SW
C
z1
z2
SL
.
SR
z1:22°
Front panel
- 30°
z2:120°
Display
Rear panel
43
Remote
Index
Appendix
Contents
Connections
Playback
Settings
o Layout including height speakers and ceiling
speakers
Tips
Appendix
n Ceiling speaker layout example
Combination of 5.1-channel layout and top front/top rear speakers.
n Height speaker layout example
TRL
TRR
TFL
Combination of 5.1-channel layout and front height/rear height
speakers.
TFR
FL
RHL
RHR
FHL
SW
FR
C
FHR
FR
C
SR
.
SW
.
FL
SL
SL
Front panel
Display
Rear panel
44
Remote
Index
SR
Contents
Connections
Playback
Settings
n Dolby Atmos Enabled speaker layout example
Tips
Appendix
Upgrade (Auro-3D)
Combination of 5.1-channel layout and front Dolby/surround Dolby
speakers.
n Auro-3D layout example
Combination of 5.1-channel speakers with Front Height/Surround
Height/Top Surround speakers.
TS
FDL
SDL
FL
SW
FDR
C
SL
SDR
FR
FHL
SHL
SR
FHR
FL
SW
C
SR
.
.
SL
SHR
FR
0 For the best Auro-3D experience Surround Height speakers are recommended,
however you may substitute Rear Height speakers from a Dolby Atmos speaker
setup in place of Surround Height speakers.
Front panel
Display
Rear panel
45
Remote
Index
Contents
Connections
Playback
Settings
Speaker connection
NOTE
1. Press and hold the main unit’s ZONE SELECT and STATUS at the same time
for at least 3 seconds.
“Video Format < NTSC>” appears on the display.
2. Press i on the main unit twice.
NOTE
0 Disconnect this unit’s power plug from the power outlet before connecting the
speakers. Also, turn off the subwoofer.
0 Connect so that the speaker cable core wires do not protrude from the speaker
terminal. The protection circuit may be activated if the core wires touch the rear
panel or if the + and - sides touch each other. (“Protection circuit” (v p. 356))
0 Never touch the speaker terminals while the power cord is connected. Doing so
could result in electric shock. When the “Setup Assistant” (page 9 in the separate
“Quick Start Guide”) is running, follow the instructions in the “Setup Assistant”
screen for making connections. (Power is not supplied to the speaker terminals
while the “Setup Assistant” is running.)
0 Use speakers with an impedance of 4 – 16 Ω/ohms.
Display
Appendix
0 Carry out the following settings when using a speaker with an impedance of 4 – 6
Ω/ohms.
Here we connect the speakers in the room to this unit.
This section explains how to connect them using typical examples.
Front panel
Tips
Rear panel
“Sp.Imp. <8ohms>” appears on the display.
3. Use o or p on the main unit to select the impedance.
6ohms:
Select when the impedance for any of the connected speakers is
6 Ω/ohms.
4ohms:
Select when the impedance for any of the connected speakers is
4 Ω/ohms.
4. Press the main unit’s ENTER to complete the setting.
46
Remote
Index
Contents
Connections
Playback
Settings
Appendix
o Connecting the subwoofer
o Connecting the speaker cables
Use a subwoofer cable to connect the subwoofer. Two subwoofers can
be connected to this unit.
To use two subwoofers, set “Subwoofer” to “2 spkrs” in the “Speaker
Config.” setting. (v p. 258)
The level and distance can be set separately for Subwoofer 1 and
Subwoofer 2.
Carefully check the left (L) and right (R) channels and + (red) and –
(black) polarities on the speakers being connected to this unit, and be
sure to connect the channels and polarities correctly.
Peel off about 3/8 inch (10 mm) of sheathing from the
tip of the speaker cable, then either twist the core wire
tightly or terminate it.
.
1
Tips
Turn the speaker terminal counterclockwise to loosen it.
.
2
.
Insert the speaker cable’s core wire to the hilt into the
speaker terminal.
SW1
SW2
.
3
Turn the speaker terminal clockwise to tighten it.
.
4
Front panel
Display
Rear panel
47
Remote
Index
Contents
Connections
Playback
Settings
o About the cable label (supplied) for channel
identification
Speaker terminals
FRONT L
FRONT R
CENTER
SURROUND L
SURROUND R
SURROUND BACK L
SURROUND BACK R
FRONT WIDE L
FRONT WIDE R
FRONT HEIGHT L
FRONT HEIGHT R
TOP FRONT L
TOP FRONT R
TOP MIDDLE L
TOP MIDDLE R
TOP REAR L
TOP REAR R
REAR HEIGHT L
REAR HEIGHT R
FRONT DOLBY L
FRONT DOLBY R
SURROUND DOLBY L
SURROUND DOLBY R
BACK DOLBY L
BACK DOLBY R
SUBWOOFER
The channel display section for speaker terminals on the rear panel is
color-coded for each channel to be identifiable.
Attach the cable label corresponding to each speaker to each speaker
cable.
This makes it easy to connect the correct cable to the speaker
terminals on the rear panel.
Front panel
Display
Rear panel
Tips
48
Remote
Appendix
Color
White
Red
Green
Light blue
Blue
Beige
Brown
Light Purple
Purple
Light Yellow
Yellow
Light Yellow
Yellow
Light Purple
Purple
Light Purple
Purple
Light Purple
Purple
Light Yellow
Yellow
Light Purple
Purple
Light Purple
Purple
Black
Index
Contents
Connections
Playback
Settings
Tips
Attach the cable label for each channel to its speaker cable as shown
in the diagram.
Refer to the table and attach the label to each speaker cable.
Then, make connection so that the color of the speaker terminal
matches that of the cable label.
G How to attach the cable label H
Speaker
.
This unit
Front panel
Display
Rear panel
49
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Speaker configuration and “Amp Assign” settings
This unit has a built-in 9-channel power amplifier. In addition to the basic 5.1-channel system, a variety of speaker systems can be configured by changing
the “Amp Assign” settings to suit the application, such as 7.1-channel systems, bi-amp connections and 2-channel systems for multi-zone playback.
(v p. 249)
Perform “Amp Assign” settings to suit the number of rooms and speaker configuration to be installed. (v p. 249)
MAIN ZONE
Playback speaker in each zone
ZONE2
5.1-channel playback
7.1-channel playback
9.1-channel playback
11.1-channel playback
7.1-channel playback (bi-amp connection of front
speakers)
2-channel speakers for stereo playback
2-channel bi-amp speakers for stereo playback
Second front speakers
7.1-channel playback
7.1-channel playback
5.1-channel playback (bi-amp connection of front
speakers)
5.1-channel playback
7.1-channel playback
2-channel (Pre-out)
2-channel
(Speaker out)
2-channel (Pre-out)
2-channel
(Speaker out)
2-channel
(Speaker out)
1-channel
(Speaker out)
ZONE3
“Amp Assign” settings
Connection
page
Can be set in all “Amp
Assign” modes.
7.1ch + ZONE2 (Default)
9.1ch
11.1ch
2-channel (Pre-out)
7.1ch (Bi-Amp)
52
9.1ch/2ch Front
7.1ch/2ch Front (Bi-Amp)
7.1ch + Front B
2-channel (Pre-out) 7.1ch + ZONE2 (Default)
75
76
77
78
2-channel
7.1ch + ZONE3
(Speaker out)
2-channel (Pre-out) 5.1ch (Bi-Amp) + ZONE2
78
2-channel
(Speaker out)
1-channel
(Speaker out)
53
58
68
74
79
5.1ch + ZONE2/3
80
7.1ch + ZONE2/3-MONO
81
The sound mode that can be selected varies according to the speaker configuration. See “Relationship between sound modes and channel output”
(v p. 337) for the sound modes that are supported.
The following pages provide basic connection examples.
Front panel
Display
Rear panel
50
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Upgrade (Auro-3D)
0 In addition to the connections described in p.52 - 82, this unit allows for various
speaker connections with the “Amp Assign” setting.
Also refer to the menu screen in “View Terminal Config.” on the “Amp Assign”
setting screen, which shows how to make connections in your environment.
Refer to the example connection for “Example connection for the Auro-3D
9.1-channel system” (v p. 65) when playing Auro-3D with a 9.1channel system using the basic 5.1-channel system and the front height
and surround height speakers.
Also refer to the connection example for “Example connection for the
Auro-3D 10.1-channel system” (v p. 71) when playing Auro-3D with a
10.1 channel system by adding the top surround speaker.
Speakers/Amp Assign
Assign Mode
11.1ch
PRE OUT
T.REAR
HEIGHT1
HEIGHT1
SUBWOOFER
1
HEIGHT1
AUTO SWITCHING
2
SPEAKERS
FRONT
FRONT
CENTER
SURROUND
SURROUND
SURROUND BACK
SURROUND BACK
AUTO SWITCHING AUTO SWITCHING
.
Back
Front panel
Display
Rear panel
51
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o 5.1-channel playback
This serves as a basic 5.1-channel surround system.
FL
FR
SW
C
SL
SW
FR
FL
C
SR
SL
.
.
SR
Front panel
Display
Rear panel
52
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o 7.1-channel playback
n Example connections when using surround back speakers
This 7.1-channel surround system is the same as a basic 5.1-channel system but with surround back speakers.
FL
FR
SW
C
SL
SR
SBR
.
.
SBL
0 Set “Floor” - “Layout” to “5ch & SB” in the menu when connecting in this
configuration. (v p. 253)
Front panel
Display
Rear panel
SW
FR
FL
C
SR
SL
SBR
SBL
0 When using a single surround back speaker, connect it to the SURROUND BACK
L terminal.
53
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
n Example connections when using front wide speakers
This 7.1-channel surround system is the same as a basic 5.1-channel system but with front wide speakers.
FL
FWL
FR
SW
C
SL
FWR
.
.
SR
FR
SW
FL
C
SR
SL
0 Set “Floor” - “Layout” to “5ch & FW” in the menu when connecting in this configuration. (v p. 253)
Front panel
Display
Rear panel
54
Remote
Index
FWR FWL
Contents
Connections
Playback
Settings
Tips
Appendix
n Example connections when using ceiling speakers
This 7.1-channel surround system is the same as a basic 5.1-channel system but with ceiling speakers.
TML
TMR
FL
FR
SW
C
SR
.
.
SL
SW
FR
FL
C
SR
SL
TMR TML
0 Set “Floor” - “Layout” to “5ch” and “Height Sp” to “2ch” in the menu when connecting in this configuration. (v p. 253)
0 The top front or top rear speakers can be connected instead of the top middle speakers. In this case, set the ceiling speakers to be connected under “Height” - “Layout” in the
menu. (v p. 254)
Front panel
Display
Rear panel
55
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
n Example connections when using height speakers
FHL
FHR
FL
FR
SW
C
SL
.
.
SR
SW
FR
FL
C
SR
SL
FHR
FHL
0 Set “Floor” - “Layout” to “5ch” and “Height Sp” to “2ch” in the menu when connecting in this configuration. (v p. 253)
0 The rear height speakers can be connected instead of the front height speakers. In this case, set the height speakers to be connected under “Height” - “Layout” in the menu.
(v p. 254)
Front panel
Display
Rear panel
56
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
n Example connections when using Dolby Atmos Enabled speakers
This 7.1-channel surround system is the same as a basic 5.1-channel system but with front Dolby speakers.
FDL
FL
SW
FDR
C
FR
SR
.
.
SL
SW
FR
FL
C
SR
SL
FDR
FDL
0 Set “Floor” - “Layout” to “5ch” and “Dolby Sp” to “2ch” in the menu when connecting in this configuration. (v p. 253)
0 The surround Dolby speakers can be connected instead of the front Dolby speakers. In this case, set the Dolby Atmos Enabled speakers to be connected under “Height” “Layout” in the menu. (v p. 254)
Front panel
Display
Rear panel
57
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o 9.1-channel playback
This system, which is based on a 5.1-channel system, plays back up to 9.1-channels at the same time.
You can connect speakers for up to 11-channels for MAIN ZONE. When you connect speakers for 10 or more channels, the output speakers
automatically switch according to the input signal and sound mode.
n Example connection when using surround back and front wide speakers
FL
FWL
FR
SW
C
SL
FWR
SR
SBR
.
.
SBL
SW
FR
FL
C
SR
SL
0 Set “Floor” - “Layout” to “5ch & SB & FW” in the menu when connecting in this configuration. (v p. 253)
Front panel
Display
Rear panel
58
Remote
Index
SBR
SBL FWR FWL
Contents
Connections
Playback
Settings
Tips
Appendix
n Example connection when using one set of ceiling speakers
TML
TMR
FL
SL
FR
SW
C
SBL
SR
SBR
FR
FL
C
SR
SL
SBR
Display
Rear panel
TMR TML
z The top front or top rear speakers can be connected instead of the top middle
speakers. In this case, set the ceiling speakers to be connected under “Height” “Layout” in the menu. (v p. 254)
0 Set “Height” - “Height Sp” to “2ch” in the menu when connecting in this
configuration. (v p. 253)
Front panel
SBL
HEIGHT 1 z
.
.
SW
59
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
n Example connection when using two sets of ceiling speakers
TRL
TRR
TFL
TFR
FL
SL
FR
SW
C
SR
FR
FL
C
SR
SL
TRR
TRL
TFR
TFL
.
SW
.
HEIGHT 2 z
z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the
settings. (v p. 66)
0 Set “Floor” - “Layout” to “5ch” or set “5ch & SB” and “Height Sp” to “4ch” in the
menu when connecting in this configuration. (v p. 253)
Front panel
Display
Rear panel
HEIGHT 1 z
60
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
n Example connection when using one set of height speakers
FHL
FHR
FL
SL
FR
SW
C
SBL
SR
SBR
FR
FL
C
SR
SL
SBR
Display
Rear panel
FHR
FHL
z The rear height speakers can be connected instead of the front height speakers.
In this case, set the height speakers to be connected under “Height” - “Layout” in
the menu. (v p. 254)
0 Set “Height” - “Height Sp” to “2ch” in the menu when connecting in this
configuration. (v p. 253)
Front panel
SBL
HEIGHT 1 z
.
.
SW
61
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
n Example connection when using two sets of height speakers
RHL
FHL
FHR
FL
SL
RHR
FR
SW
C
SR
FR
FL
C
SR
SL
RHR RHL FHR
FHL
.
SW
.
HEIGHT 2 z
z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the
settings. (v p. 66)
0 Set “Floor” - “Layout” to “5ch” or set “5ch & SB” and “Height Sp” to “4ch” in the
menu when connecting in this configuration. (v p. 253)
Front panel
Display
Rear panel
HEIGHT 1 z
62
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
n Example connection when using one set of Dolby Atmos Enabled speakers
FDL
SL
FL
SW
FDR
C
SBL
FR
SR
SBR
FR
FL
C
SR
SL
SBR
Display
Rear panel
FDR
FDL
z The surround Dolby speakers can be connected instead of the front Dolby
speakers. In this case, set the Dolby Atmos Enabled speakers to be connected
under “Height” - “Layout” in the menu. (v p. 254)
0 Set “Height” - “Dolby Sp” to “2ch” in the menu when connecting in this
configuration. (v p. 253)
Front panel
SBL
HEIGHT 1 z
.
.
SW
63
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
n Example connection when using two sets of Dolby Atmos Enabled speakers
FDL
SDL
FL
SW
FDR
C
SL
SDR
FR
SR
FR
FL
C
SR
SL
SDR SDL
FDR
FDL
.
SW
.
HEIGHT 2 z
z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the
settings. (v p. 66)
0 Set “Floor” - “Layout” to “5ch” or set “5ch & SB” and “Dolby Sp” to “4ch” in the
menu when connecting in this configuration. (v p. 253)
Front panel
Display
Rear panel
HEIGHT 1 z
64
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Upgrade (Auro-3D)
n Example connection for the Auro-3D 9.1-channel system
This speaker configuration is optimized for Auro-3D playback.
FHL
FHR
FL
FR
SHL
SW
C
SR
SW
FR
FL
C
SR
SL
Display
Rear panel
FHL
HEIGHT 1 z
z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the
settings. (v p. 67)
0 Set “Floor” - “Layout” to “5ch” or set “5ch & SB” and “Height Sp” to “4ch” in the
menu when connecting in this configuration. (v p. 253)
Next, set “Height” - “Layout” to “Front Height & Surr. Height”. (v p. 254)
Front panel
SHR SHL FHR
HEIGHT 2 z
.
.
SL
SHR
65
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
z Channels output from the HEIGHT1 and FRONT WIDE/HEIGHT2 speaker terminals can be changed to the following patterns according to the speaker systems being used.
The two sets of height speakers can be used if you are not using the front wide speakers. Set this from “Amp Assign” in the menu. (v p. 249)
Front wide
speaker
Used
Not used
Front panel
Combination of height speakers to be used
Number of height/ Number of Dolby
Combination pattern
ceiling speakers
Speakers
Front Height
Top Front
2 speakers
None
Top Middle
Top Rear
Rear Height
Front Dolby
None
2 speakers
Surround Dolby
Back Dolby
Front Height & Top Middle
Front Height & Top Rear
Front Height & Rear Height
4 speakers
None
Top Front & Top Rear
Top Front & Rear Height
Top Middle & Rear Height
Front Dolby & Top Rear
Front Dolby & Rear Height
2 speakers
2 speakers
Front Height & Surr. Dolby
Top Front & Surround Dolby
None
4 speakers
Front Dolby & Surround Dolby
Display
Rear panel
66
Remote
Connected terminals
FRONT WIDE/HEIGHT2
HEIGHT1 SPEAKER
SPEAKER
Front Height
Front Wide
Top Front
Front Wide
Top Middle
Front Wide
Top Rear
Front Wide
Rear Height
Front Wide
Front Dolby
Front Wide
Surround Dolby
Front Wide
Back Dolby
Front Wide
Front Height
Top Middle
Front Height
Top Rear
Front Height
Rear Height
Top Front
Top Rear
Top Front
Rear Height
Top Middle
Rear Height
Front Dolby
Top Rear
Front Dolby
Rear Height
Front Height
Surround Dolby
Top Front
Surround Dolby
Front Dolby
Surround Dolby
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Upgrade (Auro-3D)
Front wide
speaker
Not used
Combination of height speakers to be used
Number of height/ Number of Dolby
Combination pattern
ceiling speakers
Speakers
Front Height & Surr. Height
4 speakers
None
Front Height & Rear Height z
Connected terminals
FRONT WIDE/HEIGHT2
HEIGHT1 SPEAKER
SPEAKER
Front Height
Surround Height
Front Height
Rear Height
z For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup in
place of Surround Height speakers.
Front panel
Display
Rear panel
67
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o 11.1-channel playback
This system, which is based on a 5.1-channel system, plays back up to 11.1-channels at the same time.
You can connect speakers for up to 13-channels for MAIN ZONE by using an external power amplifier. When you connect speakers for 12 or more
channels, the output speakers automatically switch according to the input signal and sound mode.
n Example connection when using two sets of ceiling speakers
TRL
TFL
SL
FWL
HEIGHT 2 z
TRR
FL
FR
SW
TRR
TFR
C
SBL
FWR
TRL
Power amplifier
SR
.
SBR
0 Set “Height” - “Height Sp” to “4ch” in the menu when connecting in this
configuration. (v p. 253)
SW
FR
FL
C
SR
SL
SBR
SBL FWR FWL
TFR
TFL
.
HEIGHT 1 z
z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the
settings. (v p. 72)
Front panel
Display
Rear panel
68
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
n Example connection when using two sets of height speakers
HEIGHT 2 z
RHL
SL
FHL
FWL
FHR
FL
FR
SW
RHR
C
SBL
FWR
RHR RHL
Power amplifier
SR
.
SBR
0 Set “Height” - “Height Sp” to “4ch” in the menu when connecting in this
configuration. (v p. 253)
SW
FR
FL
C
SR
SL
SBR
SBL FWR FWL FHR
FHL
.
HEIGHT 1 z
z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the
settings. (v p. 72)
Front panel
Display
Rear panel
69
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
n Example connection when using two sets of Dolby Atmos Enabled speakers
HEIGHT 2 z
SDR SDL
SDL
FWL
FDL
FL
SW
Power amplifier
FDR
C
SL
FR
FWR
SDR
SR
SBL
.
SBR
0 Set “Height” - “Dolby Sp” to “4ch” in the menu when connecting in this
configuration. (v p. 253)
SW
FR
FL
C
SR
SL
SBR
SBL FWR FWL
FDR
FDL
.
HEIGHT 1 z
z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the
settings. (v p. 72)
Front panel
Display
Rear panel
70
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Upgrade (Auro-3D)
n Example connection for the Auro-3D 10.1-channel system
This speaker configuration is optimized for Auro-3D playback.
TS
TS
FHL
FHR
FL
FR
SHL
SW
C
Power amplifier
SR
.
SL
SHR
0 Set “Height” - “Height Sp” to “5ch” in the menu when connecting in this
configuration. Next, set “Height” - “Layout” to “Front Height & Surr. Height”.
SW
FR
FL
C
SR
SL
SHR SHL FHR
.
HEIGHT 2 z
FHL
HEIGHT 1 z
z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the
settings. (v p. 73)
Front panel
Display
Rear panel
71
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
z The combination of the HEIGHT1 and HEIGHT2 channels can be changed to the following patterns according to the speaker system being used.
Set this from “Amp Assign” in the menu. (v p. 249)
Number of height/
ceiling speakers
2 speakers
4 speakers
None
2 speakers
None
Front panel
Combination of height speakers to be used
Number of Dolby
Combination pattern
Speakers
Front Height
Top Front
None
Top Middle
Top Rear
Rear Height
Front Height & Top Middle
Front Height & Top Rear
Front Height & Rear Height
None
Top Front & Top Rear
Top Front & Rear Height
Top Middle & Rear Height
Front Dolby
2 speakers
Surround Dolby
Back Dolby
Front Dolby & Top Rear
Front Dolby & Rear Height
Front Height & Surr. Dolby
2 speakers
Front Height & Back Dolby
Top Front & Surround Dolby
Top Front & Back Dolby
Front Dolby & Surround Dolby
4 speakers
Front Dolby & Back Dolby
Display
Rear panel
72
Connected terminals
Remote
HEIGHT1 SPEAKER
HEIGHT2 PRE OUT
Front Height
Top Front
Top Middle
Top Rear
Rear Height
Front Height
Front Height
Front Height
Top Front
Top Front
Top Middle
Front Dolby
Surround Dolby
Back Dolby
Front Dolby
Front Dolby
Front Height
Front Height
Top Front
Top Front
Front Dolby
Front Dolby
Top Middle
Top Rear
Rear Height
Top Rear
Rear Height
Rear Height
Top Rear
Rear Height
Surround Dolby
Back Dolby
Surround Dolby
Back Dolby
Surround Dolby
Back Dolby
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Upgrade (Auro-3D)
Combination of height speakers to be used
Number of height/
Number of Dolby
Combination pattern
ceiling speakers
Speakers
Front Height & Surr. Height & Top
Surround
5 speakers
None
Front Height & Rear Height & Top
Surroundz
Connected terminals
HEIGHT1 SPEAKER
HEIGHT2 PRE OUT
SUBWOOFER2 PRE
OUT
Front Height
Surround Height
Top Surround
Front Height
Rear Height
Top Surround
z For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup in
place of Surround Height speakers.
Front panel
Display
Rear panel
73
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o 7.1-channel playback (bi-amp connection of front speakers)
This system plays back 7.1-channels. You can use the bi-amp connection for front speakers. Bi-amp connection is a method to connect separate
amplifiers to the tweeter terminal and woofer terminal of a speaker that supports bi-amplification. This connection enables back EMF (power returned
without being output) from the woofer to flow into the tweeter without affecting the sound quality, producing a higher sound quality.
You can connect speakers for up to 9-channels for MAIN ZONE. When you connect speakers for 8 or more channels, the output speakers
automatically switch according to the input signal and sound mode.
FHL
FHR
FL
(Bi-Amp)
SW
FR
(Bi-Amp)
C
SL
SR
C
SW
SBL
SR
SL
SBR
FHRz FHLz
SBL
.
SBR
(R)
(L)
NOTE
0 When making bi-amp connections, be sure to remove the short-circuiting plate or
wire between the speaker’s woofer and tweeter terminals.
q
w
q
w
FL
.
FR
z The height speakers, ceiling speakers and Dolby Atmos Enabled speakers can
be connected to the HEIGHT1 speaker terminals. Set the speaker to be
connected from “Height” - “Layout” in the menu. (v p. 254)
Front panel
Display
Rear panel
74
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Exclusive 9.1-channel playback + 2-channel playback speakers
You can connect speakers used exclusively for 2-channel playback, which are used for the direct and stereo modes, and speakers used exclusively
for 9.1 multi-channel playback. The speakers used exclusively for multi-channel playback and the speakers used exclusively for 2-channel playback
are automatically switched for playback in accordance with the sound mode.
Multi-channel playback
FHL
FHR
FL’ FL
C
SL
SR
SBL
SBR
.
SW
FR FR’
FL’ FL
FR
FL
C
SR
SL
SBR
FR FR’
C
SL
SR
SBL
SBR
.
2-channel playback
Front panel
Display
SBL
FR’
FL’
FHRz FHLz
z The height speakers, ceiling speakers and Dolby Atmos Enabled speakers can
be connected to the HEIGHT1 speaker terminals. Set the speaker to be
connected from “Height” - “Layout” in the menu. (v p. 254)
Switching
FHR
FHL
SW
Rear panel
75
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Exclusive 7.1-channel playback + 2-channel playback (bi-amp connection) speakers
You can connect speakers used exclusively for 2-channel playback, which are used for the direct and stereo modes, and speakers used exclusively
for 7.1 multi-channel playback. You can use the bi-amp connection for the speakers exclusively used for 2-channel playback. The speakers used
exclusively for multi-channel playback and the speakers used exclusively for 2-channel playback are automatically switched for playback in
accordance with the sound mode.
Multi-channel playback
FL’
FR FR’
FL
SW
C
SL
SR
SBL
SBR
SW
FR
C
FL
SR
SL
SBR
SBL
Switching
FL’
FL’
(Bi-Amp)
FR’
FL’
(Bi-Amp)
FL
C
(R)
(L)
FR
q
SR
SBL
SBR
q
FR’
FL’
.
SL
w
.
2-channel playback
Front panel
Display
Rear panel
76
Remote
Index
w
Contents
Connections
Playback
Settings
Tips
Appendix
o 7.1-channel playback + second pair of front speakers
This system enables switching playback between front speakers A and B as desired.
You can connect speakers for up to 9-channels for MAIN ZONE. When you connect speakers for 8 or more channels, the output speakers
automatically switch according to the input signal and sound mode.
FHL
FHR
FL FL
(B) (A)
SW
FR FR
(A) (B)
C
SR
SBL
SBR
SW
FR
(A)
FL
(A)
C
SR
SL
SBR
SBL
FR
(B)
FL
(B)
FHRz FHLz
.
.
SL
z The height speakers, ceiling speakers and Dolby Atmos Enabled speakers can
be connected to the HEIGHT1 speaker terminals. Set the speaker to be
connected from “Height” - “Layout” in the menu. (v p. 254)
Front panel
Display
Rear panel
77
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o 7.1-channel playback (MAIN ZONE) + 2-channel playback (ZONE2 or ZONE3)
This type of configuration plays back 7.1-channels in MAIN ZONE and 2-channels in ZONE2.
(Speakers can output audio from ZONE3 instead of ZONE2 (Assign Mode: 7.1ch + ZONE3)).
You can connect speakers for up to 9-channels for MAIN ZONE. When you connect speakers for 8 or more channels, the output speakers
automatically switch according to the input signal and sound mode.
MAIN ZONE
FHL
FHR
FL
FR
SW
C
SL
SR
SW
SBL
FR
FL
C
SR
SL
SBR
FHRz FHLz
ZONE2
L
.
SBR
SBL
ZONE2
R
ZONE2
ZONE2
R
.
ZONE2
L
z The height speakers, ceiling speakers and Dolby Atmos Enabled speakers can
be connected to the HEIGHT1 speaker terminals. Set the speaker to be
connected from “Height” - “Layout” in the menu. (v p. 254)
Front panel
Display
Rear panel
78
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o 5.1-channel playback (bi-amp connection of front speakers: MAIN ZONE) + 2-channel playback
(ZONE2)
This type of configuration plays back 5.1-channels in MAIN ZONE and 2-channels in ZONE2. You can use the bi-amp connection for front speakers in
MAIN ZONE.
MAIN ZONE
FL
(Bi-Amp)
SW
FR
(Bi-Amp)
C
SL
SR
C
SW
SR
SL
ZONE2 ZONE2
R
L
ZONE2
(R)
ZONE2
L
(L)
ZONE2
R
q
w
q
FL
.
.
FR
Front panel
Display
Rear panel
79
Remote
Index
w
Contents
Connections
Playback
Settings
Tips
Appendix
o 5.1-channel playback (MAIN ZONE) + 2-channel playback (ZONE2) + 2-channel playback (ZONE3)
This type of configuration plays back 5.1-channels in MAIN ZONE and 2-channels in ZONE2 and ZONE3.
MAIN ZONE
FL
FR
SW
SW
C
SL
SR
ZONE2
ZONE3
FR
FL
C
SR
SL
ZONE2
L
.
ZONE2
R
ZONE2
R
ZONE3
L
ZONE3
R
.
ZONE2
L
Front panel
Display
Rear panel
80
Remote
Index
ZONE3
R
ZONE3
L
Contents
Connections
Playback
Settings
Tips
Appendix
o 7.1-channel playback (MAIN ZONE) + 1-channel playback (ZONE2) + 1-channel playback (ZONE3)
This type of configuration plays back 7.1-channels in MAIN ZONE and 1-channel (monaural) in ZONE2 and ZONE3.
You can connect speakers for up to 9-channels for MAIN ZONE. When you connect speakers for 8 or more channels, the output speakers
automatically switch according to the input signal and sound mode.
MAIN ZONE
FHL
FHR
FL
FR
SW
C
SL
SR
SW
SBL
FR
FL
C
SR
SL
SBR
FHRz FHLz
ZONE2
Mono
.
SBR
SBL
ZONE3
Mono
ZONE2
ZONE3
ZONE3
Mono
.
ZONE2
Mono
z The height speakers, ceiling speakers and Dolby Atmos Enabled speakers can
be connected to the HEIGHT1 speaker terminals. Set the speaker to be
connected from “Height” - “Layout” in the menu. (v p. 254)
Front panel
Display
Rear panel
81
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Connecting an external power amplifier
You can use this unit as a pre-amp by connecting an external power amplifier to the PRE OUT connectors. By adding a power amplifier to each
channel, the realness of the sound can be further enhanced.
Select the terminal to use and connect the device.
Subwoofer
(Primary)
Power amplifiers
AUDIO
AUDIO
FRONT
L
CENTER
R
HEIGHT2
L
R
AUDIO
HEIGHT1
L
FRONT
WIDE
R
L
R
SURROUND
BACK
L
R
SURROUND
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
SUBWOOFER
2
.
SUBWOOFER
1
Subwoofer
(Secondary)
0 When using just one surround back speaker, connect it to the left channel (L) terminal.
Front panel
Display
Rear panel
82
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting a TV
Connect a TV to this unit so that the input video is output to the TV. You can also enjoy audio from the TV on this unit.
How to connect a TV depends on the connectors and functions equipped on the TV.
ARC (Audio Return Channel) function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.
Is the TV equipped with an HDMI connector?
Yes
Is the TV compatible with the ARC (Audio Return Channel) ?
No
No
.
Yes
“Connection 1 : TV equipped with an HDMI
connector and compatible with the ARC (Audio
Return Channel)” (v p. 84)
Front panel
Display
“Connection 2 : TV equipped with an HDMI
connector and incompatible with the ARC (Audio
Return Channel)” (v p. 85)
Rear panel
83
Remote
“Connection 3 : TV equipped without
an HDMI connector” (v p. 86)
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connection 1 : TV equipped with an HDMI connector and compatible with the ARC
(Audio Return Channel)
Use an HDMI cable to connect a TV that is compatible with the ARC function to this unit.
Set “HDMI Control” to “On” when using a TV that supports the ARC function. (v p. 223)
TV
.
HDMI
IN
(ARC)
0 When using the HDMI control function, connect to the HDMI MONITOR 1 connector.
Front panel
Display
Rear panel
84
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC
(Audio Return Channel)
Use an HDMI cable to connect the TV to this unit.
To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit.
TV
IN
OPTICAL
OUT
HDMI
IN
.
OUT
Front panel
Display
Rear panel
85
Remote
Index
Contents
Connections
Playback
Settings
Tips
Connection 3 : TV equipped without an HDMI connector
Use a component video or a video cable to connect the TV to this unit.
To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit.
TV
OUT
OPTICAL
OUT
IN
VIDEO
IN
COMPONENT VIDEO
IN
Y
PB PR
.
or
Front panel
Display
Rear panel
86
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting a playback device
This unit is equipped with three types of video input connectors (HDMI, component video and composite video) and three types of audio input connectors
(HDMI, digital audio and audio).
Select input connectors on this unit according to the connectors equipped on the device you want to connect.
If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections.
In the HDMI connection, audio and video signals can be transmitted through a single HDMI cable.
0
0
0
0
0
“Connecting a set-top box (Satellite tuner/cable TV)” (v p. 88)
“Connecting a DVD player or Blu-ray Disc player” (v p. 89)
“Connecting a video camcorder or game console” (v p. 90)
“Connecting a turntable” (v p. 91)
“Connecting a device with a multi-channel output connector” (v p. 92)
0 Connect devices to this unit as indicated by the input sources printed on the audio/video input connectors of this unit.
0 The source that is assigned to the HDMI IN, DIGITAL AUDIO IN, COMPONENT VIDEO IN, VIDEO IN and AUDIO IN connectors can be changed. See “Input Assign” on how
to change the input source assigned to the input connectors. (v p. 233)
0 To play back audio signals that are input to this unit on a TV connected via HDMI, set in the menu “HDMI Audio Out” to “TV”. (v p. 222)
0 To enjoy content that is copyright protected by HDCP 2.2, use a playback device and TV compatible with HDCP 2.2 only.
Front panel
Display
Rear panel
87
Remote
Index
Contents
Connections
Playback
Settings
Tips
Connecting a set-top box (Satellite tuner/cable TV)
This explanation uses the connection with a satellite tuner/cable TV STB as an example.
Select the input connectors on this unit to match the connectors on the device that you want to connect to.
(HDMI incompatible device)
Satellite tuner/
Cable TV
AUDIO
VIDEO
AUDIO
OUT
R
L
COAXIAL
OUT
Satellite tuner/
Cable TV
R
VIDEO
OUT
COMPONENT VIDEO
OUT
Y
PB PR
HDMI
OUT
L
or
or
L
.
R
Front panel
Display
Rear panel
88
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Connecting a DVD player or Blu-ray Disc player
This explanation uses the connection with a DVD player or Blu-ray Disc player as an example.
Select the input connectors on this unit to match the connectors on the device that you want to connect to.
(HDMI incompatible device)
DVD player
AUDIO
AUDIO
OUT
R
L
COAXIAL
OUT
DVD player
Blu-ray Disc
player
HDMI
OUT
HDMI
OUT
VIDEO
R
VIDEO
OUT
COMPONENT VIDEO
OUT
Y
PB PR
L
or
or
L
.
R
Front panel
Display
Rear panel
89
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Connecting a video camcorder or game console
This explanation uses the connection with a video camcorders as an example.
Connect a playback device to this unit, such as a video camcorder or game console.
(HDMI incompatible device)
Video camcorder
AUDIO
VIDEO
AUDIO
OUT
L
R
VIDEO
OUT
R
L
R
HDMI
OUT
.
L
Video
camcorder
Front panel
Display
Rear panel
90
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting a turntable
This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect to a turntable with a low output moving
coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer.
If you set this unit’s input source to “Phono” and you accidentally increase the volume without having a turntable connected, you may hear a hum noise
from the speakers.
Turntable
(MM cartridge)
AUDIO
OUT
GND
L
R
NOTE
0 The earth terminal (SIGNAL GND) of this unit is not for safety grounding
purposes. If this terminal is connected when there is a lot of noise, the noise
can be reduced. Note that depending on the turntable, connecting the ground
line may have the reverse effect of increasing noise. In this case, it is not
necessary to connect the ground line.
Front panel
Display
Rear panel
91
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting a device with a multi-channel output connector
You can connect this unit to an external device fitted with multi-channel sound audio output connectors to enjoy music and video.
To play analog signals input from 7.1CH IN connectors, set “Input Mode” to “7.1CH IN”. (v p. 237)
Devices with a multi-channel output connector
(Blu-ray Disc player, DVD player,
External decoder etc.)
AUDIO
SUBWOOFER
FRONT
L
R
CENTER
SURROUND
L
R
SURROUND
BACK
L
R
L
R
L
R
L
R
L
R
L
R
L
R
0 The video signal can be connected in the same way as a Blu-ray Disc
player/DVD player. (“Connecting a DVD player or Blu-ray Disc
player” (v p. 89))
Front panel
Display
Rear panel
92
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting an iPod or USB memory device to the USB port
To connect an iPod to this unit, use the USB adapter cable that was supplied with the iPod.
For operating instructions see “Playing an iPod” (v p. 105) or “Playing a USB memory device” (v p. 110).
iPod
USB memory
device
.
or
0 Marantz does not guarantee that all USB memory devices will operate or receive power. When using a portable USB hard disk drive (HDD) which came with an AC adapter,
use that device’s supplied AC adapter.
NOTE
0 USB memory devices will not work via a USB hub.
0 It is not possible to use this unit by connecting the unit’s USB port to a PC via a USB cable.
0 Do not use an extension cable when connecting a USB memory device. This may cause radio interference with other devices.
Front panel
Display
Rear panel
93
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Supported iPod/iPhone models
• iPod classic
• iPod nano
• iPod touch
.
• iPhone
Front panel
Display
Rear panel
94
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting an HD Radio antenna
After connecting the antenna and receiving a broadcast signal, fix the
antenna with tape in a position where the noise level becomes minimal.
(“Listening to an HD Radio™ stations” (v p. 118))
AM loop antenna
(for HD Radio broadcasting, supplied)
q
w
e
0 If you are unable to receive a good broadcast signal, we recommend installing an
outdoor antenna. For details, inquire at the retail store where you purchased the
unit.
NOTE
0 Make sure the AM loop antenna lead terminals do not touch metal parts of the
panel.
FM indoor antenna
(for HD Radio broadcasting,
supplied)
Black
.
White
Front panel
Display
Rear panel
95
Remote
Index
Contents
Connections
Playback
Settings
Tips
o AM loop antenna assembly
o Using the AM loop antenna
1
Suspending on a wall
Suspend directly on a wall without assembling.
2
Put the stand section through the bottom of the loop
antenna from the rear and bend it forward.
Insert the projecting part into the square hole in the
stand.
Stand
Square hole
.
Nail, tack, etc.
Loop antenna
Standing alone
Use the procedure shown above to assemble.
When assembling, refer to “AM loop antenna assembly”.
.
Projecting part
.
Front panel
Display
Appendix
Rear panel
96
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting to a home network (LAN)
This unit can connect to a network using a wired LAN or wireless LAN.
You can connect this unit to your home network (LAN) to enable various
types of playback and operations as described below.
0 Playback of network audio such as Internet Radio and from your media
server(s)
0 Playback of music content from online streaming services
0 Using the Apple AirPlay function
0 Operation on this unit via the network
0 Firmware Update
Wired LAN
.
To make connections via wired LAN, use a LAN cable to connect the
router to this unit as shown in the figure below.
PC
NAS
(Network Attached
Storage)
LAN port/
Ethernet
connector
LAN port/
Ethernet
connector
Modem
For connections to the Internet, contact an ISP (Internet Service
Provider) or a computer shop.
Internet
To WAN side
To LAN port
To LAN port
Router
Front panel
Display
Rear panel
97
Remote
Index
Contents
Connections
Playback
Settings
Wireless LAN
Tips
Appendix
0 When using this unit, we recommend you use a router equipped with the following
functions:
When connecting to the network via wireless LAN, connect the external
antennas for Bluetooth/wireless connectivity connection to the rear panel
and stand them upright.
See “Wi-Fi Setup” on how to connect to a wireless LAN router.
(v p. 271)
Internet
0
Modem
0
0
To WAN side
0
0 Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
0 Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching hub with a
speed of 100 Mbps or greater.
Only use a shielded STP or ScTP LAN cable (readily available at electronics
stores). (CAT-5 or greater recommended)
The normal shielded-type LAN cable is recommended.
If a flat-type cable or unshielded-type cable is used, other devices could be
affected by noise.
When using a router that supports the WPS (Wi-Fi Protected Setup) function, WiFi connection can be carried out easily.
When using this unit connected to a network with no DHCP function, configure the
IP address, etc. in “Network”. (v p. 270)
NOTE
0 The types of routers that can be used depend on the ISP. Contact your ISP or a
computer shop for details.
0 This unit is not compatible with PPPoE. A PPPoE compatible router is required if
your contracted line is not set using PPPoE.
0 Do not connect a NETWORK connector directly to the LAN port / Ethernet
connector on your computer.
0 Various online services may be discontinued without prior notice.
.
Router with access point
Front panel
Display
Rear panel
98
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting an external control device
REMOTE CONTROL jacks
o Performing operations by RC on this unit
without visual contact
o Remotely connecting Marantz devices
When you are using a Marantz device other than this unit that supports
remote connection, you can transmit remote control signals just by
connecting the device to the REMOTE CONTROL IN/OUT connector
with a monaural cable.
Set the remote control switch located on the rear panel of the
connected audio component to “EXTERNAL” or “EXT.” to use this
feature.
You can connect an external IR receiver to the REMOTE CONTROL
connectors to perform operations on this unit with the supplied remote
control unit without visual contact. This might be necessary if the unit is
hidden in a cupboard or corner, so you can’t directly point with the
remote control unit to the device.
To do this, disable the remote control signal receiving function
(“Remote lock function” (v p. 189)).
IR receiver
.
RC OUT
NOTE
Front panel
Display
Rear panel
.
0 When the remote control signal receiving function is disabled, you can not perform
operations with the remote control unit.
99
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
DC OUT jacks
When a device with DC IN jack is connected, the connected device’s power on/standby can be controlled through linked operation to this unit.
The DC OUT jack outputs a maximum 12 V DC /150 mA electrical signal.
.
12 V DC/150 mA trigger-compatible device
NOTE
0 Use a monaural mini-plug cable for connecting the DC OUT jack. Do not use a stereo mini-plug cable.
0 If the permissible trigger input level for the connected device is larger than 12 V DC/150 mA, or has shorted, the DC OUT jack cannot be used. In this case, turn off the power
to the unit, and disconnect it.
Front panel
Display
Rear panel
100
Remote
Index
Connections
Contents
Playback
Settings
Tips
Connecting the power cord
After completing all the connections, insert the power plug into the power outlet.
Power cord (supplied)
To household power outlet
.
(AC 120 V, 60 Hz)
Front panel
Display
Rear panel
101
Remote
Index
Appendix
Contents
Connections
Playback
Settings
o Contents
Tips
Appendix
Playback network audio/service
Basic operation
Turning the power on
103
Selecting the input source
103
Adjusting the volume
104
Turning off the sound temporarily (Muting)
104
Selecting a sound mode
162
Listening to Internet Radio
129
Playing back files stored on a PC and NAS
133
Listening to Pandora®
137
Listening to SiriusXM Internet Radio
144
AirPlay function
147
Spotify Connect function
150
Convenience functions
Playback a device
Playing a DVD player/Blu-ray Disc player
104
Playing an iPod
105
Playing a USB memory device
110
Listening to music on a Bluetooth device
113
Listening to an HD Radio™ stations
118
Convenience functions
151
HDMI control function
177
Smart Menu function
178
Sleep timer function
180
Smart select function
182
Panel lock function
187
Remote lock function
189
Switches light illumination on/off
190
Other functions
Front panel
Display
Rear panel
102
Web control function
185
Playback in ZONE2/ZONE3 (Separate room)
191
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Basic operation
Turning the power on
1
POWER X
Press POWER X to turn on power to the unit.
0 You can press the input source select button when the unit is in standby mode to
turn on the power.
0 You can also switch the power to standby by pressing X on the main unit.
Input source
select buttons
Selecting the input source
VOLUME df
MUTE :
1
Press the input source select button to be played back.
The desired input source can be selected directly.
.
0 You can also select the input source by turning INPUT SELECTOR on the main
unit.
Front panel
Display
Rear panel
103
Remote
Index
Contents
Connections
Playback
Settings
Adjusting the volume
1
Use VOLUME df to adjust the volume.
The following describes the procedure for playing DVD player/Blu-ray Disc
player.
1
2
3
Turning off the sound temporarily
(Muting)
4
Press MUTE :.
0 “MUTE” appears on the display.
0 : appears on the TV screen.
Prepare for playback.
A Turn on the power of the TV, subwoofer and player.
B Change the TV input to the input of this unit.
Press POWER X to turn on power to the unit.
Press DVD or Blu-ray to switch an input source for a
player used for playback.
Play the DVD player or Blu-ray Disc player.
o Surround playback (v p. 162)
0 The sound is reduced to the level set at “Mute Level” in the menu. (v p. 212)
0 To cancel mute, either adjust the sound volume or press MUTE : again.
Front panel
Display
Appendix
Playback a DVD player/Blu-ray Disc
player
0 The variable range differs according to the input signal and channel level setting.
0 You can also adjust the master volume by turning VOLUME on the main unit.
1
Tips
Rear panel
104
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing an iPod
0 You can use the USB cable provided with the iPod to connect the iPod
with the unit’s USB port and enjoy music stored on the iPod.
0 For information on the iPod models that can be played back with this
unit, see “Supported iPod/iPhone models” (v p. 94).
0 See “AirPlay function” (v p. 147) on how to play a music file saved on
an iPhone, iPod touch, iPad or iTunes on this unit via the network.
iPod/USB
CH/PAGE df
OPTION
uio p
ENTER
BACK
1
89
67
3
2
.
HOME
Front panel
Display
Rear panel
105
Remote
Index
Contents
Connections
Playback
Settings
This can be operated when the “iPod Browse Mode” is set to “From
iPod”. (v p. 107)
0 “iPod Browse Mode settings” (v p. 107)
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 157)
0 “Adjusting the tone (Tone)” (v p. 158)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 159)
0 “Adjusting the picture quality for your viewing environment (Picture
Mode)” (v p. 160)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 161)
Connect the iPod to the USB port. (v p. 93)
Press iPod/USB to switch the input source to “iPod/
USB”.
“Browse from iPod” is displayed on the display of this unit.
0 Nothing is displayed on the TV screen.
3
Operate iPod itself while seeing the iPod screen to play
back music.
0 “iPod Browse Mode” has two modes, “From iPod” and “On-Screen”. The default
setting is “From iPod” that operate the iPod itself while looking at the iPod screen.
0 To change to “On-Screen”, where you perform operations while having the iPod
information displayed on the TV screen, see “iPod Browse Mode settings”
(v p. 107).
NOTE
0 Depending on the type of iPod and the software version, some functions may not
operate.
0 Note that Marantz will accept no responsibility whatsoever for any problems
arising with the data on an iPod when using this unit in conjunction with the iPod.
Front panel
Display
Rear panel
Appendix
o Operations accessible through the option
menu
Listening to music on an iPod
1
2
Tips
106
Remote
Index
Contents
Connections
Playback
Settings
iPod Browse Mode settings
Operation buttons
In this mode, various lists and screens during playback on the iPod are
displayed on the TV screen.
This section describes the steps up to playing back tracks on the iPod in
“On-Screen”.
1
2
3
Press OPTION when the input source is “iPod/USB”.
The option menu screen is displayed.
0 Operations available for “On-Screen” and “From iPod” are listed
below.
Pause
2
Stop
89
Skip to previous track / Skip to next track
67
(Press and hold) Fast-reverse / Fastforward
Playback / Pause
(Press and hold) Stop
(Press and hold) Fast-reverse / Fastforward
CH/PAGE d f
Switch to the previous page/next page in
the list display
HOME
Go to Home screen
From iPod
On-Screen
Music file
P
P
Video file
0 The actions of the operation buttons may differ.
z
Remote control
unit (This unit)
P
P
0 The display switches between track title, artist name, and album title etc. each time
the main unit’s STATUS is pressed during playback with “iPod Browse Mode” set
to “On-Screen”.
0 English letters, numbers and certain symbols are displayed. Incompatible
characters are displayed as “.” (period).
iPod
P
zOnly
4
3
ui
Use o p to select “On-Screen”, then press ENTER.
Active
buttons
Playback
Skip to previous track / Skip to next track
The “iPod Browse Mode” screen is displayed.
Playable
files
the sound is played.
Use ui p to select the file to be played, then press
ENTER.
Playback starts.
Front panel
Appendix
Function
1
ENTER
Select “iPod Browse Mode”, then press ENTER.
iPod Browse Mode
Tips
Display
Rear panel
107
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Operations accessible through the option
menu
This can be operated when the “iPod Browse Mode” is set to “OnScreen”. (v p. 107)
0 “iPod Browse Mode settings” (v p. 107)
0 “Performing repeat playback” (v p. 109)
0 “Performing random playback” (v p. 109)
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 157)
0 “Adjusting the tone (Tone)” (v p. 158)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 159)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 161)
Front panel
Display
Rear panel
108
Remote
Index
Appendix
Contents
Connections
Playback
Settings
1
Press OPTION with “iPod Browse Mode” set to “OnScreen”.
4
Press OPTION with “iPod Browse Mode” set to “OnScreen”.
The option menu screen is displayed.
The option menu screen is displayed.
2
3
Appendix
Performing random playback
Performing repeat playback
1
Tips
2
3
Use ui to select “Repeat”, then press ENTER.
Use o p to select repeat playback mode.
Off
(Default) :
Repeat playback mode is canceled.
One:
A file being played is played repeatedly.
All:
All files in the folder currently being
played are played repeatedly.
4
Press ENTER.
Use ui to select “Random”, then press ENTER.
Use o p to select random playback mode.
Off
(Default):
Disable random playback.
On:
Randomly play back all tracks in the
current playback folder.
Press ENTER.
The display returns to the playback screen.
The display returns to the playback screen.
0 During random playback, each time playback of a track is completed, another
track is randomly selected for playback from tracks in the folder. Therefore, it’s
possible that you may hear a track played back more than once during random
playback.
0 “Random” settings are stored for each input source.
0 “Repeat” settings are stored for each input source.
Front panel
Display
Rear panel
109
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing a USB memory device
0 Playing back music or viewing still picture (JPEG) files stored on a USB
memory device.
0 Only USB memory devices conforming to mass storage class standards
can be played on this unit.
0 This unit is compatible with USB memory devices in “FAT16” or
“FAT32” format.
0 The audio/video format types and specifications supported by this unit
for playback are as follows.
See “Playing back a USB memory devices” (v p. 333) for details.
iPod/USB
0 WMA
0 MP3
0 WAV
CH/PAGE df
0 MPEG-4 AAC
0 FLAC
OPTION
uip
ENTER
BACK
HOME
0 ALAC
0 AIFF
0 DSD
0 JPEG
.
1
89
67
3
2
Front panel
Display
Rear panel
110
Remote
Index
Contents
Connections
Playback
Settings
Playing files stored on USB memory
devices
1
2
Operation buttons
Appendix
Function
1
Playback
3
Pause
Connect the USB memory device to the USB port.
(v p. 93)
2
Stop
89
Skip to previous track / Skip to next track
Press iPod/USB to switch the input source to “iPod/
USB”.
67
(Press and hold) Fast-reverse / Fastforward
USB
Playback / Pause
ENTER
(Press and hold) Stop
Skip to previous track / Skip to next track
[1/9]
ui
Folder1
(Press and hold) Fast-reverse / Fastforward
Folder2
Folder3
Music1
Music2
Music3
Music4
CH/PAGE d f
Switch to the previous page/next page in
the list display
HOME
Go to Home screen
Option
0 When an MP3 music file includes album art data, the album art can be displayed while
playing the file.
0 This unit plays back picture (JPEG) files in the order in which they are stored in the
folder.
.
OPTION
3
Tips
Use ui p to select the file to be played, then press
ENTER.
Playback starts.
NOTE
0 Note that Marantz will accept no responsibility whatsoever for any problems arising
with the data on a USB memory device when using this unit in conjunction with the
USB memory device.
Front panel
Display
Rear panel
111
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Operations accessible through the option
menu
0 “Performing repeat playback” (v p. 152)
0 “Performing random playback” (v p. 152)
0 “Searching content with keywords (Text Search)” (v p. 154)
0 “Playing back music and a favorite picture at the same time
(Slideshow)” (v p. 155)
0 “Setting the Slideshow Interval” (v p. 156)
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 157)
0 “Adjusting the tone (Tone)” (v p. 158)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 159)
0 “Adjusting the picture quality for your viewing environment (Picture
Mode)” (v p. 160)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 161)
Front panel
Display
Rear panel
112
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to music on a Bluetooth device
Music files stored on Bluetooth devices such as smartphones, digital
music players, etc. can be enjoyed on this unit by pairing and connecting
this unit with the Bluetooth device.
Communication is possible up to a range of about 32.8 ft/10 m.
NOTE
0 To play back music from a Bluetooth device, the Bluetooth device needs to
support the A2DP profile.
Bluetooth
OPTION
ui
ENTER
BACK
.
1
89
67
3
2
Front panel
Display
Rear panel
113
Remote
Index
Contents
Connections
Playback
Settings
Playing music from Bluetooth device
3
4
In order to enjoy music from a Bluetooth device on this unit, the Bluetooth
device must first be paired with this unit.
Once the Bluetooth device has been paired, it does not need to be paired
again.
2
A Connect the supplied external antennas for Bluetooth/wireless
connectivity to the Bluetooth/wireless LAN antenna connectors
on the rear panel. (v p. 28)
B Press POWER X to turn on power to the unit.
5
Press Bluetooth to switch the input source to
“Bluetooth”.
6
Bluetooth
Turn on Bluetooth from your mobile device’s
settings menu, then select
“Marantz SR7010” when it appears
in the device list.
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
When a number appears on the display of this unit,
check that it is the same number as that shown on the
screen of the Bluetooth device and then select “Pair”
for both the Bluetooth device and the unit.
Play music using any app on your Bluetooth device.
0 The Bluetooth device can also be operated with the remote
control of this unit.
0 The next time the input source is switched to Bluetooth, this unit
automatically connects to the last Bluetooth device that was
connected.
Cancel
0 Enter “0000” when the password is requested on the screen of the Bluetooth
device.
When using for the first time, the unit will go into the pairing mode
automatically and “Pairing...” will appear on the display of the unit.
Display
Activate the Bluetooth settings on your mobile device.
At the end of the pairing, the device name appears on the display of
this unit.
Pairing Mode
Front panel
Appendix
Connect to the Bluetooth device while “Pairing” is being displayed
on the display of the unit.
Perform the connection with the Bluetooth device close to the unit
(about 3.3 ft/1 m).
Prepare for playback.
.
1
Tips
Rear panel
114
Remote
Index
Contents
Connections
Operation buttons
Playback
Function
1
Playback
3
Pause
2
Stop
89
Skip to previous track / Skip to next track
67
(Press and hold) Fast-reverse / Fastforward
ENTER
Settings
Appendix
NOTE
0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth
device needs to support the AVRCP profile.
0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.
0 Depending on the type of Bluetooth device, this unit outputs audio that is coupled
to the volume setting on the Bluetooth device.
o Operations accessible through the option
menu
Playback / Pause
(Press and hold) Stop
0 “Pairing with other Bluetooth devices” (v p. 116)
0 “Performing repeat playback” (v p. 152)
Skip to previous track / Skip to next track
ui
Tips
0 “Performing random playback” (v p. 152)
(Press and hold) Fast-reverse / Fastforward
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 157)
0 “Adjusting the tone (Tone)” (v p. 158)
0 “Displaying your desired video during audio playback (Video
0 Press STATUS on this unit during playback to switch the display between Title
name, Artist name, Album name, etc.
0 English letters, numbers and certain symbols are displayed. Incompatible
characters are displayed as “.” (period).
Front panel
Display
Rear panel
Select)” (v p. 159)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 161)
115
Remote
Index
Contents
Connections
Playback
Settings
Pairing with other Bluetooth devices
3
4
5
Activate the Bluetooth settings on your mobile device.
Press OPTION when the input source is “Bluetooth”.
The option menu screen is displayed.
Use ui to select “Pairing Mode”, then press ENTER.
The device will go into the pairing mode.
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
When a number appears on the display of this unit,
check that it is the same number as that shown on the
screen of the Bluetooth device and then select “Pair”
for both the Bluetooth device and the unit.
At the end of the pairing, the device name appears on the display of
this unit.
Front panel
Display
Rear panel
Appendix
0 This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.
0 Enter “0000” when the password is requested on the screen of the Bluetooth
device.
0 Press and hold the Bluetooth on the remote control for at least 3 seconds to go
into pairing mode.
Pair a Bluetooth device with this unit.
1
2
Tips
116
Remote
Index
Contents
Connections
Playback
Settings
Tips
Reconnecting to this unit from a
Bluetooth device
After pairing is completed, the Bluetooth device can be connected without
performing any operations on this unit.
This operation also needs to be performed when switching the Bluetooth
device for playback.
1
2
3
4
If a Bluetooth device is currently connected, deactivate
the Bluetooth setting of that device to disconnect it.
Activate the Bluetooth setting of the Bluetooth device
to be connected.
Select this unit from the Bluetooth device list on your
Bluetooth device.
Play music using any app on your Bluetooth device.
0 When the power of this unit is turned on, the input source will be automatically
switched to “Bluetooth” if a Bluetooth device is connected.
0 When the “Network Control” setting of this unit is set to “Always On” and a
Bluetooth device is connected with the unit in the standby state, the power of the
unit will be turned on automatically. (v p. 276)
Front panel
Display
Rear panel
117
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to an HD Radio™ stations
0 HD Radio stations offer higher sound quality than conventional FM/AM
broadcasts. It is also possible to receive data services and select
broadcasts from among up to eight multicast programs.
0 HD Radio Technology provides higher quality sound than conventional
broadcasts and allows reception of data services.
.
TUNER
Digital, CD-quality sound. HD Radio Technology enables local radio
stations to broadcast a clean digital signal. AM sounds like today’s FM and
FM sounds like a CD.
.
CH/PAGE df
Program Service Data: Contributes to the superior user experience of HD
Radio Technology. Presents song name, artist, station IDs, and other
relevant data streams.
OPTION
uio p
ENTER
.
BACK
TUNE +, –
Adjacent to traditional main stations are extra local FM channels. These
HD2/HD3 Channels provide new, original music as well as deep cuts into
traditional genre.
.
0–9
Front panel
Display
Rear panel
118
Remote
Index
Connections
Playback
Settings
Tips
.
Contents
0 HD Radio Technology manufactured under license from iBiquity Digital
Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD
Radio, and “Arc” logos are proprietary trademarks of iBiquity Digital
Corp.
For detailed information on HD Radio Technology, please go to
“www.hdradio.com/”
0 For antenna connections, see “Connecting an HD Radio
antenna” (v p. 95).
Front panel
Display
Rear panel
119
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Listening to an HD Radio broadcast
1
2
5
Connect the antenna. “Connecting an HD Radio
antenna” (v p. 95)
6
Press TUNER to switch the input source to “HD Radio”.
G TV screen H
Tips
Appendix
Use o p to select “FM” or “AM”, then press ENTER.
FM:
When listening to an FM broadcast.
AM:
When listening to an AM broadcast.
Press TUNE + or TUNE - to select the station you want
listen to.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
HD Radio
STEREO HD-AUTO
0 The modes for receiving FM broadcasts consists of “Auto” mode that automatically
searches available broadcast stations and “Manual” mode that lets you tune in
using buttons to change the frequency. The default setting is “Auto”. You can also
use “Direct Tune” to tune in by entering the frequency directly.
0 In “Auto” mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the “Manual” mode or “Direct Tune” mode to tune in.
Now Playing
CH 1
FM 92.10MHz
Preset
OPTION
Option
Operation buttons
Function
.
Tune
.
G Display of this unit H
3
4
Press OPTION.
TUNE +, –
Selects the radio station (up/down)
CH/PAGE d f
Selects preset radio stations
ui
Selects the radio station (up/down)
op
Selects preset radio stations
0–9
Preset channel selection /
Direct frequency tuning
The option menu screen is displayed.
Use ui to select “FM/AM”, then press ENTER.
This displays the reception band input screen.
Front panel
Display
Rear panel
120
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Operations accessible through the option
menu
0 “Tuning in by entering the frequency (Direct Tune)” (v p. 122)
0 “Changing the tune mode (Tune Mode)” (v p. 122)
0 “Tuning in to stations and presetting them automatically (Auto Preset
Memory)” (v p. 123)
0 “Presetting the current broadcast station (Preset
Memory)” (v p. 124)
0 “Specify a name for the preset broadcast station (Preset
Name)” (v p. 125)
0 “Skipping preset broadcast stations (Preset Skip)” (v p. 126)
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 157)
0 “Adjusting the tone (Tone)” (v p. 158)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 159)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 161)
Front panel
Display
Rear panel
121
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tuning in by entering the frequency
(Direct Tune)
2
3
4
5
Appendix
Changing the tune mode (Tune Mode)
You can change the mode for tuning into FM and AM broadcasts. If you
cannot tune in automatically with “Auto” mode, change the mode to
“Manual” and tune in manually.
You can enter the receiving frequency directly to tune in.
1
Tips
1
Press OPTION when the input source is “HD Radio”.
The option menu screen is displayed.
2
3
Use ui to select “Direct Tune”, then press ENTER.
The screen that lets you enter the frequency is displayed.
Use ui or 0 – 9 to select a number and press p.
0 If o is pressed, the immediately preceding input is cancelled.
Press OPTION when the input source is “HD Radio”.
The option menu screen is displayed.
Use ui to select “Tune Mode”, then press ENTER.
Use o p to select the tune mode, then press ENTER.
Auto:
Repeat step 3 and enter the frequency of the radio
station you want to hear.
Automatically search for and tune to a
receivable radio station.
HD-Auto:
Automatically tune to the HD Radio
station.
When setting is completed, press ENTER.
Analog-Auto:
Automatically tune to an analog station
and analog HD Radio station.
Manual:
Manually change the frequency one
step at a time each time the button is
pressed.
Analog-Manual:
Manually tune to an analog station and
analog HD Radio station.
The preset frequency is tuned in.
Front panel
Display
Rear panel
122
Remote
Index
Contents
Connections
Playback
Settings
Selecting an audio program
1
2
Tips
Tuning in to stations and presetting
them automatically (Auto Preset
Memory)
Select the tuning mode (“HD-Auto”, “Auto” or
“Manual”).
A maximum of 56 radio stations can be automatically preset.
Press TUNE + or TUNE – to tune in the desired
Multicast channel.
1
0 If the station you are tuning in has multiple audio programs,
“HD1”is indicated on the display.
If it only has one audio program, “HD” is indicated.
0 When the unit receives multicast channels, the multicast program
number (HD2) is displayed to the right of the station name.
2
3
0 This function is not available for AM HD Radio stations because they cannot
broadcast multicast channels.
0 If digital audio data cannot be received after the station is selected, or if the station
signal is weak, the unit may not be able to receive the multicast channels.
0 If the station signal is weak, the digital audio of the multicast channel may cut out.
Press OPTION when the input source is “HD Radio”.
The option menu screen is displayed.
Use ui to select “Auto Preset Memory”, then press
ENTER.
Press ENTER.
The unit starts to tune in to radio stations automatically and preset
them.
0 When presetting is completed, “Completed” is displayed for about
5 seconds and the option menu screen turns off.
0 The preset memory is overwritten.
Front panel
Display
Rear panel
Appendix
123
Remote
Index
Contents
Connections
Playback
Settings
Presetting the current broadcast
station (Preset Memory)
2
3
4
Appendix
Channel
Default settings
1–8
92.10 / 92.30 / 92.50 / 92.70 / 93.10 / 93.50 / 93.70 / 94.10
MHz
9 – 16
94.30 / 94.50 / 94.70 / 94.90 / 95.10 / 95.30 / 95.50 / 95.70
MHz
17 – 24
Tune in the broadcast station you want to preset.
(“Listening to an HD Radio broadcast” (v p. 120))
98.10 / 98.30 / 98.50 / 98.70 / 98.90 / 99.10 / 100.10 /
100.30 MHz
25 – 32
100.50 / 100.70 / 100.90 / 101.10 / 101.30 / 101.50 /
101.70 / 101.90 MHz
Press OPTION.
33 – 40
103.10 / 103.30 / 103.50 / 103.70 / 103.90 / 104.10 /
104.30 / 104.50 MHz
41 – 48
104.70 / 104.90 / 105.10 / 105.30 / 105.50 / 105.70 /
105.90 / 106.10 MHz
49 – 56
106.30 / 106.50 / 106.70 / 106.90 / 107.10 / 107.30 /
107.50 / 107.90 MHz
Your favorite broadcast stations can be preset so that you can tune them
in easily.
Up to 56 stations can be preset.
1
Tips
The option menu screen is displayed.
Use ui to select “Preset Memory”, then press ENTER.
The list of already preset channels is displayed.
Use ui or 0 – 9 to select the channel you want to
preset, then press ENTER.
The current broadcast station that is preset.
0 To preset other stations, repeat steps 1 to 4.
Listening to preset stations
1
Front panel
Display
Rear panel
124
Use CH/PAGE df or 0 – 9 to select the desired preset
channel.
Remote
Index
Contents
Connections
Playback
Settings
Specify a name for the preset
broadcast station (Preset Name)
5
You can set the name to the preset broadcast station or change it.
Up to eight characters can be input.
1
2
3
4
6
Press OPTION when the input source is “HD Radio”.
The option menu screen is displayed.
Tips
Use ui to select a name label, then press ENTER.
The screen that lets you edit the Preset Name is displayed.
0 If you select “Set Defaults”, then the unit returns to displaying the
frequency.
Enter the characters, then press “OK”.
0 For character input, see “Using the keyboard
screen” (v p. 203).
7
Use ui to select “Preset Name”, then press ENTER.
The Preset Name screen is displayed.
Press OPTION to return to the previous screen.
Use o p to select the group of the broadcast station
you want to name.
Use ui to select the broadcast station you want to
name, then press ENTER.
Front panel
Display
Appendix
Rear panel
125
Remote
Index
Contents
Connections
Playback
Settings
Skipping preset broadcast stations
(Preset Skip)
2
3
A Use o p to select the group of broadcast stations you want to
skip.
B Use ui to select the broadcast station you want to skip.
C Use o p to select “Skip”.
The station you selected is not displayed.
Press OPTION when the input source is “HD Radio”.
4
The option menu screen is displayed.
Press OPTION to return to the previous screen.
Use ui to select “Preset Skip”, then press ENTER.
The “Preset Skip” screen is displayed.
n To set the stations you want to skip by groups
A Use o p to select the group of broadcast stations you want to
skip.
B Press u to select “Set No.z – z to Skip”, then press ENTER.
Skip all the broadcast stations that are included in the
selected group “z-z”.
(z is the selected group number.)
Front panel
Display
Rear panel
Appendix
n To set the stations you want to skip by stations
Perform auto preset memory to save all the broadcasting stations that can
be received in the memory. Selecting a broadcast station becomes easier
by skipping unnecessary memories.
1
Tips
126
Remote
Index
Contents
Connections
Playback
Settings
Tips
Cancelling Preset Skip
1
2
3
While the “Preset Skip” screen is displayed, use o p to
select a group containing a broadcast station to cancel
the skip for.
Use ui to select a broadcast station to cancel the skip
for.
Use o p to select “On”.
The skip is cancelled.
NOTE
0 “Preset Skip” cannot be cancelled for groups.
Front panel
Display
Rear panel
127
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Checking the HD Radio reception
information
Press STATUS on the main unit while an HD Radio
broadcast is being received.
The current reception information is shown on the display.
1. Normal
$
2. Frequency / Signal strength
$
3. Long Station name / Program and Program type
$
4. Title name / Artist name
$
5. Album name / Genre name
Front panel
Display
Rear panel
Appendix
0 If the station signal weakens while receiving a digital broadcast (while “HD” and
text is displayed), the mode automatically switches to the analog reception mode
(the reception frequency is displayed).
Because of this, the “HD” and text may flicker if the station signal level is weak and
unstable.
.
1
Tips
128
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to Internet Radio
0 Internet Radio refers to radio broadcasts distributed over the Internet.
Internet Radio stations from around the world can be received.
0 The Internet radio station list on this unit the database service provided
by vTuner radio station.
0 The audio format types and specifications supported by this unit for
playback are as follows.
See “Playing back Internet Radio” (v p. 336) for details.
0 WMA
ONLINE
MUSIC
INTERNET
RADIO
CH/PAGE df
0 MP3
0 MPEG-4 AAC
OPTION
uio p
ENTER
BACK
1
2
.
HOME
Front panel
Display
Rear panel
129
Remote
Index
Contents
Connections
Playback
Settings
Listening to Internet Radio
1
4
Prepare for playback.
0 Check the network environment, then turn on this unit’s power.
(“Connecting to a home network (LAN)” (v p. 97))
2
Press ONLINE MUSIC.
0 You can also press INTERNET RADIO to select the input source
“Internet Radio” directly.
Use uio p to select “Internet Radio”, then press
ENTER.
Online Music
Favorites
Internet Radio
Front panel
Display
Rear panel
130
Appendix
Use ui to select the search method for the radio
station that you wish to playback and then press
ENTER.
Name of country:
Select the various regions.
Displays typical Internet Radio stations.
Search Stations :
Displays all Internet Radio stations that
this unit can tune in to.
Search Podcasts :
Displays Internet Radio stations in the
podcasts that this unit can tune in to.
Recommended
Stations :
Displays recommended Internet Radio
stations.
radiomarantz.com :
Displays Internet Radio stations added
to favorites in vTuner. For instructions
on how to add to favorites in vTuner,
see “Using vTuner to add Internet Radio
stations to favorites” (v p. 132).
Recently Played :
Displays recently played Internet Radio
stations. Up to 20 stations can be
stored in “Recently Played”.
Search by Keyword:
Displays Internet Radio stations
searched by keyword. For character
input, see “Using the keyboard
screen” (v p. 203).
Media Server
.
3
Tips
Remote
Index
Contents
5
Connections
Playback
Settings
Operation buttons
Function
Playback
2
Stop
ENTER
(Press and hold) Stop
CH/PAGE d f
Switch to the previous page/next page in
the list display
HOME
Go to Home screen
Appendix
Playing the last played Internet Radio
station
Use ui p to select the station, then press ENTER.
Playback starts once buffering reaches “100%”.
1
Tips
1
Press INTERNET RADIO.
The source switches to “Internet Radio” and the last played radio
station plays.
o Operations accessible through the option
menu
0 “Searching content with keywords (Text Search)” (v p. 154)
0 “Playing back music and a favorite picture at the same time
0 The display switches between track title and radio station name etc. each time the
main unit’s STATUS is pressed.
0 Any characters that cannot be displayed are replaced with “.” (period).
(Slideshow)” (v p. 155)
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 157)
0 “Adjusting the tone (Tone)” (v p. 158)
NOTE
0 “Displaying your desired video during audio playback (Video
0 The radio station database service may be suspended or be otherwise unavailable
without notice.
Front panel
Display
Rear panel
Select)” (v p. 159)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 161)
131
Remote
Index
Contents
Connections
Playback
Settings
Using vTuner to add Internet Radio
stations to favorites
4
5
There are many Internet Radio stations in the world, and this unit can tune
into these stations. But finding the radio station you want to hear may be
difficult, because there are too many stations. If this is the case, then
please use vTuner, an Internet Radio station search website specifically
designed for this unit. You can use your PC to search Internet Radio
stations and add them as your favorites. This unit can play radio stations
added to vTuner.
1
6
7
Check the MAC address of this unit.
(“Information” (v p. 270))
Use your PC to access the vTuner website
(http://www.radiomarantz.com).
Display
Rear panel
Select the search criteria (genre, region, language,
etc.) of your choice.
Select the radio station of your choice from the list, and
then click the Add to Favorites icon.
Enter the name of the favorite group, then click “Go”.
A new favorite group that includes the selected radio station is
created.
0 Internet Radio stations added to favorites in vTuner can be played
from “radiomarantz.com” with this unit. (v p. 130)
0 You can also add a radio station that is not in the vTuner list.
Enter the MAC address of this unit, then click “Go”.
Front panel
Enter your E-mail address and a password of your
choice.
hear.
vTuner.
3
Appendix
0 You can also enter a keyword to search for a station you want to
0 The MAC address is necessary when you create an account for
2
Tips
132
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back files stored on a PC and NAS
0 This unit can play back music files and playlists (m3u, wpl) stored on a
PC and on Network Attached Storage (NAS) that supports DLNA.
0 The network audio playback function of this unit connects to the server
using technologies shown below.
Windows Media Player Network Sharing Service
0 The audio/video format types and specifications supported by this unit
for playback are as follows.
For details, see “Playing back a file saved on a PC or
NAS” (v p. 335).
0 WMA
ONLINE
MUSIC
0 MP3
0 WAV
CH/PAGE df
0 MPEG-4 AAC
0 FLAC
0 ALAC
OPTION
uio p
ENTER
BACK
0 AIFF
0 DSD
0 JPEG
1
89
67
3
2
.
HOME
Front panel
Display
Rear panel
133
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Applying media sharing settings
Here, we apply the settings to share music files stored on a PC and NAS on the network.
If you are using a Media Server, be sure to apply this setting first.
.
o When using Windows Media Player 11
o When using Windows Media Player 12
(Windows 7 / Windows 8)
1
2
3
4
5
1
2
3
Start up Windows Media Player 12 on the PC.
Select “More streaming options...” in the “Stream”.
Select “Allowed” in the “Marantz SR7010” drop-down
list.
4
Select “Allowed” in the drop-down list for “Media
programs on this PC and remote connections...”.
5
Follow the screen instructions to end the setting.
Start up Windows Media Player 11 on the PC.
Select “Media Sharing” in the “Library”.
Click the “Share my media” check box, select “Marantz
SR7010”, and then click “Allow”.
As you did in step 3, select the icon of the device (other
PCs and mobile devices) you want to use as a media
controller, and then click “Allow”.
Click “OK” to finish.
o Sharing media stored in NAS
Change settings on the NAS to allow this unit and other devices (PCs
and mobile devices) used as media controllers to access the NAS. For
details, see the owner’s manual that came with the NAS.
Front panel
Display
Rear panel
134
Remote
Index
Contents
Connections
Playback
Settings
Playing back files stored on a PC and
NAS
4
5
Use this procedure to play music files, image files or playlists.
2
3
Prepare for playback.
Use iu p to select the file, then press ENTER.
Playback starts once buffering reaches “100%”.
A Check the network environment, then turn on this unit’s power.
(“Connecting to a home network (LAN)” (v p. 97))
B Prepare the computer. (vComputer’s operating instructions)
Operation buttons
Press ONLINE MUSIC.
Use uio p to select “Media Server”, then press
ENTER.
Favorites
Internet Radio
Function
1
Playback
3
Pause
2
Stop
89
Skip to previous track / Skip to next track
67
(Press and hold) Fast-reverse / Fastforward
Playback / Pause
ENTER
Online Music
(Press and hold) Stop
Skip to previous track / Skip to next track
Media Server
ui
Front panel
Display
Rear panel
Appendix
Use ui to select the server including the file to be
played, then press ENTER.
(Press and hold) Fast-reverse / Fastforward
CH/PAGE d f
Switch to the previous page/next page in
the list display
HOME
Go to Home screen
.
1
Tips
135
Remote
Index
Contents
Connections
Playback
Settings
Appendix
o Operations accessible through the option
menu
0 The display switches between track title, artist name, and album title each time the
main unit’s STATUS is pressed.
0 When a WMA (Windows Media Audio), MP3 or MPEG-4 AAC file includes album
art data, the album art can be displayed while the music files are playing.
0 If you use Ver.11 or later of Windows Media Player, the album art for WMA files
can be displayed.
0 WMA Lossless files can be played when using a server supporting transcoding,
such as Windows Media Player (Ver.11 or later).
0 This unit plays back picture (JPEG) files in the order in which they are stored in the
folder.
0 “Performing repeat playback” (v p. 152)
0 “Performing random playback” (v p. 152)
0 “Searching content with keywords (Text Search)” (v p. 154)
0 “Playing back music and a favorite picture at the same time
(Slideshow)” (v p. 155)
0 “Setting the Slideshow Interval” (v p. 156)
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 157)
0 “Adjusting the tone (Tone)” (v p. 158)
NOTE
0 “Displaying your desired video during audio playback (Video
0 When playing back music files with your PC or NAS connected through wireless
LAN, audio may be interrupted depending on your wireless LAN environment. In
this case, connect using a wired LAN.
0 Depending on the size of the still picture (JPEG) file, some time may be required
for the file to be displayed.
0 The order in which the tracks/files are displayed depends on the server
specifications. If the tracks/files are not displayed in alphabetical order due to the
server specifications, searching by the first letter may not work properly.
Front panel
Tips
Display
Rear panel
Select)” (v p. 159)
0 “Adjusting the picture quality for your viewing environment (Picture
Mode)” (v p. 160)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 161)
136
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to Pandora®
Pandora is an automated music recommendation and Internet Radio
service created by the Music Genome Project.
To listen to Pandora you will need a free Pandora account.
If you do not have a Pandora account, you can create one at
www.pandora.com or from the Pandora smartphone application.
Playback of Pandora in this unit requires the Pandora account to be linked
to the unit. Therefore, access http://www.pandora.com/marantz from your
personal computer and perform the linkage.
ONLINE
MUSIC
CH/PAGE df
OPTION
uio p
ENTER
BACK
1
9
3
2
.
HOME
Front panel
Display
Rear panel
137
Remote
Index
Contents
Connections
Playback
Settings
4
Listening to Pandora®
1
Appendix
If you have a Pandora account, use ui to select “I
have a Pandora account”, then press ENTER.
0 If you do not have a Pandora account, to select “I am to new to
Prepare for playback.
Pandora”, then press ENTER. The URL of Pandora and activation
code are displayed. Access the Pandora web page from your PC
and register the displayed activation code and account
information. Then press ENTER.
0 Check the network environment, then turn on this unit’s power.
(“Connecting to a home network (LAN)” (v p. 97))
Press ONLINE MUSIC.
Use uio p to select “Pandora”, then press ENTER.
Pandora
I have a Pandora account
I am to new to Pandora
Online Music
Favorites
Internet Radio
Please go to
http://www.pandora.com/marantz and follow
the instructions there to create a new account.
Media Server
Your activation code is : zzzzzz
BACK
Cancel
Continue
This is an identification code required to
register your purchased product to the
Pandora service.This code is used to
obtain your account.
.
.
2
3
Tips
Front panel
Display
Rear panel
138
Remote
Index
Contents
5
Connections
Playback
Settings
Tips
Input “Email address” and “Password”.
0 For character input, see “Using the keyboard
screen” (v p. 203).
0 Press BACK to cancel the input. When “Cancel input?” is
displayed, select “Yes”, then press ENTER.
After inputting the “Email address” and “Password”,
select “OK”, then press ENTER.
If the “Email address” and “Password” match, the top menu for
Pandora is displayed.
My Station
[1/4]
New Station
Shuffle
Music1 Radio
Sign Out
OPTION
Option
.
6
Front panel
Display
Rear panel
139
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Creating a new station
Operation buttons
You can create up to 100 radio stations.
1
2
Use ui to select “New Station”, then press ENTER.
Input a track or artist name, then press “OK”.
Use ui to select “Search by Artist” or “Search by
Track”, then press ENTER.
You can search and display a list by track or artist.
4
Function
Playback
3
Pause
2
Stop
9
Skip to next track
Playback / Pause
(Press and hold) Stop
i
Skip to next track
CH/PAGE d f
Switch to the previous page/next page in
the list display
HOME
Go to Home screen
Use ui, select a file from the list, press ENTER.
New station is created.
0 Your new station will play music with similar qualities to the artist or track you
entered.
Front panel
Display
Rear panel
140
Appendix
1
ENTER
0 For character input, see “Using the keyboard
screen” (v p. 203).
3
Tips
Remote
Index
Contents
Connections
Playback
Settings
Tips
Listening to an existing station
1
Use ui and select the radio station that you want to
listen to, then press ENTER.
0 You can skip up to 6 tracks that are being played back within 1 hour.
Listening to created radio stations at
random
1
Use ui to select “Shuffle”, then press ENTER.
Created radio stations are selected at random, and tracks are
streamed.
Front panel
Display
Rear panel
141
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Giving feedback and managing
stations
Press p while a track is playing.
The Pandora menu screen is displayed.
I like this track :
Press when you like the track that is
being played.
Playback a favorite track.
Display the E (Thumbs up) icon.
I don’t like this track :
Press when you don’t like the track that
is being played.
Delete that track from the radio station.
Display the D (Thumbs down) icon.
Why is this track
playing? :
Displays the reason why Pandora
selected this track.
Create station :
Creates a station for the track or artist
being played.
Front panel
Display
Rear panel
142
Appendix
Bookmark this track :
Bookmarks the artist currently being
played.
You can check on a computer or iPhone
etc.
For details, see the Pandora web page.
I’m tired of this track :
Press when you don’t like the track that
is being played.
The track will not be played for 1 month.
Delete this station :
Press when you want to delete the
station that is being played.
You can personalize your stations by providing feedback.
1
Tips
Remote
Index
Contents
Connections
Playback
Settings
Tips
Sign Out
Disassociate this unit from your Pandora account.
1
2
Use ui to select “Sign Out”, then press ENTER.
When the popup menu appears, use o p to select
“Yes”, then press ENTER.
o Operations accessible through the option
menu
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 157)
0 “Adjusting the tone (Tone)” (v p. 158)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 159)
0 “Adjusting the picture quality for your viewing environment (Picture
Mode)” (v p. 160)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 161)
Front panel
Display
Rear panel
143
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to SiriusXM Internet Radio
You can access SiriusXM to enjoy access to a wide range of unique
content.
An All Access package lets you listen to SiriusXM on your computer,
smartphone, tablet or Lynx Portable.
For details, see the SiriusXM homepage.
http://www.siriusxm.com
ONLINE
MUSIC
CH/PAGE df
OPTION
uio p
ENTER
BACK
1
2
.
HOME
Front panel
Display
Rear panel
144
Remote
Index
Contents
Connections
Playback
Settings
Listening to SiriusXM Internet Radio
3
Over 155 channels commercial-free music, plus play-by-play sports,
exclusive talk, comedy and entertainment.
2
Appendix
Use uio p to select “SiriusXM”, then press ENTER.
Online Music
Prepare for playback.
Favorites
A Check the network environment, then turn on this unit’s power.
(“Connecting to a home network (LAN)” (v p. 97))
B Access the following website from your PC and obtain a SiriusXM
account.
http://www.siriusxm.com
0 If you already have SiriusXM Internet Radio credentials, select
“Sign in” in step 4 and enter your SiriusXM username and
password. If you need to setup a SiriusXM account or Internet
Radio credentials, visit http://care.siriusxm.com
Internet Radio
Media Server
.
1
Tips
4
5
Press ONLINE MUSIC.
Select “Sign in” and then press ENTER.
Input “Username” and “Password”.
0 For character input, see “Using the keyboard
screen” (v p. 203).
6
Front panel
Display
Rear panel
145
Select the “Sign in”, then press ENTER.
The top menu of SiriusXM is displayed.
Remote
Index
Contents
7
8
Connections
Playback
Settings
Disassociate this unit from your SiriusXM account.
Use ui to select the file, then press ENTER.
1
2
The selected file is displayed.
Function
1
Playback
2
Stop
ENTER
Playback
Switch to the previous page/next page in
the list display
HOME
Go to Home screen
Use ui to select “Sign Out”, then press ENTER.
When the popup menu appears, use o p to select
“Yes”, then press ENTER.
o Operations accessible through the option
menu
(Press and hold) Stop
CH/PAGE d f
Appendix
Sign Out
Use ui to select the genre, then press ENTER.
Operation buttons
Tips
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 157)
0 “Adjusting the tone (Tone)” (v p. 158)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 159)
0 “Adjusting the picture quality for your viewing environment (Picture
Mode)” (v p. 160)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 161)
Front panel
Display
Rear panel
146
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
AirPlay function
Music files stored on your iPhone, iPod touch, iPad or iTunes can be
played on this unit via the network.
PC
Router
.
0 X is displayed on the menu screen while AirPlay is being operated.
0 Source input will be switched to “Online Music” when AirPlay playback is started.
0 You can stop AirPlay playback by pressing o or choosing other input source.
0 To see song and artist names together, press STATUS on the main unit.
0 For information about how to use iTunes, also see the Help for iTunes.
0 The screen may differ depending on the OS and software versions.
Front panel
Display
Rear panel
147
Remote
Index
This unit
Contents
Connections
Playback
Settings
Playing songs from your iPhone, iPod
touch or iPad
1
2
Connect your iPhone, iPod touch or iPad Wi-Fi to the
same network as this unit.
0 For details, see your device’s manual.
2
Install iTunes 10, or later, on a Mac or Windows PC that
is connected to the same network as this unit.
Turn this unit ON.
Set “Network Control” to “Always On” for this unit. (v p. 276)
NOTE
Play the song on your iPhone, iPod touch or iPad.
0 When “Network Control” is set to “Always On”, the unit consumes more
standby power.
' is displayed on the iPhone, iPod touch or iPad screen.
3
Tap the AirPlay icon '.
Start iTunes and click the AirPlay icon ' to select the
main unit.
.
3
Appendix
Playing iTunes music with this unit
If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or later, you can
stream music stored in your “iPhone/iPod touch/iPad” directly to this unit.
1
Tips
4
AirPlay
The music will stream to this unit.
.
AirDrop
Choose a song and click play in iTunes.
4
Select the speaker (devices) you want to use.
Front panel
Display
Rear panel
148
Remote
Index
Contents
Connections
Playback
Settings
Selecting multiple speakers (devices)
Appendix
Perform iTunes playback operations
with the remote control unit of this unit
It is possible to play iTunes songs on your home’s AirPlay compatible
speakers (devices) other than those of this unit.
1
2
Tips
With this unit’s remote control unit, you can perform iTunes song play,
pause, and auto search (cue) operations.
Click the AirPlay icon ' and select “Multiple”.
1
2
3
Check the speakers you want to use.
NOTE
0 In playback using the AirPlay function, the sound is output at the iPhone, iPod
touch, iPad or iTunes volume setting level.
You should turn down the iPhone, iPod touch, iPad or iTunes volume prior to
playback and then adjust it to a suitable level.
Select the “Edit” - “Preferences...” in the iTunes menu.
Select “Devices” in the iTunes setting window.
Check “Allow iTunes audio control from remote
speakers”, and then click “OK”.
0 This does not need to be set if using version 12 or later of iTunes.
Front panel
Display
Rear panel
149
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Spotify Connect function
Spotify is the world’s most popular streaming service. If you subscribe to
Spotify Premium, you can control your new speaker with your phone or
tablet. Because Spotify is built-in to your speaker, you can still take calls or
use other apps - the music never stops.
For information on how to set up and use Spotify Connect please visit
www.spotify.com/connect
Playing Spotify music with this unit
Download the “Spotify App” onto your Android or iOS device beforehand.
To play a Spotify track in this unit, you need to register in the Spotify
premium account first.
1
Spotify server
2
3
4
Connect the Wi-Fi settings of the iOS or Android device
in the same network as this unit.
Launch the Spotify App.
Play back the Spotify track.
Tap the F icon to select the unit.
The music will stream to this unit.
Spotify App
This unit
Control
.
Audio
streaming/
control
Front panel
Display
Rear panel
150
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Convenience functions
0 This section explains how to use convenient functions that can be used
for each input source.
0 These functions can only be set in the MAIN ZONE.
ONLINE
MUSIC
OPTION
.
uio p
ENTER
Front panel
Display
Rear panel
151
Remote
Index
Contents
Connections
Playback
Settings
Tips
Performing random playback
Performing repeat playback
n Supported input sources:
USB / Media Server / Bluetooth
n Supported input sources :
USB / Media Server / Bluetooth
1
1
2
3
While content is playing, press OPTION.
The option menu screen is displayed.
4
2
3
Use ui to select “Repeat”, then press ENTER.
Use o p to select repeat playback mode.
Off
(Default):
Appendix
Repeat playback mode is canceled.
One:
A file being played is played repeatedly.
All:
All files in the folder currently being
played are played repeatedly.
4
Press ENTER.
While content is playing, press OPTION.
The option menu screen is displayed.
Use ui to select “Random”, then press ENTER.
Use o p to select random playback mode.
Off
(Default):
Disable random playback.
On:
Randomly play back all tracks in the
current playback folder.
Press ENTER.
The display returns to the playback screen.
The display returns to the playback screen.
0 During random playback, each time playback of a track is completed, another
track is randomly selected for playback from tracks in the folder. Therefore, it’s
possible that you may hear a track played back more than once during random
playback.
0 This cannot be set up if the Bluetooth device does not support the random setting
under the AVRCP profile.
0 “Random” settings are stored for each input source.
0 This cannot be set up if the Bluetooth device does not support the repeat setting
under the AVRCP profile.
0 “Repeat” settings are stored for each input source.
Front panel
Display
Rear panel
152
Remote
Index
Contents
Connections
Playback
Settings
Registering to Favorites
n Supported input sources :
Internet Radio / Media Server / Pandora / SiriusXM
1
2
While content is playing, press OPTION.
Press ONLINE MUSIC.
Use uio p to select “Favorites”, then press ENTER.
The option menu screen is displayed.
Online Music
Use ui to select “Save to Favorites”, then press
ENTER.
Favorites
Internet Radio
Media Server
“Favorite added” is displayed, and the current content is added to
favorites.
0 The display returns to the playback screen when the procedure is
completed.
.
2
Appendix
Playing back content added to the
“Save to Favorites”
You can register a total of 100 favorites.
1
Tips
3
Use ui to select the content you want to play, then
press ENTER.
Playback starts.
Front panel
Display
Rear panel
153
Remote
Index
Contents
Connections
Playback
Settings
Deleting content added to favorites
1
2
3
Appendix
Searching content with keywords (Text
Search)
Press ONLINE MUSIC.
Use uio p to select “Favorites”, then press ENTER.
n Supported input sources :
USB / Internet Radio / Media Server
Use ui to select the content you want to delete from
favorites, then press OPTION.
1
The option menu screen is displayed.
4
Tips
2
Use ui to select “Remove from Favorites”, then press
ENTER.
“Favorite removed” is displayed, and the selected content is deleted
from favorites.
0 The screen returns to the previous screen when the delete
process is complete.
3
While the content is playing, press OPTION.
The option menu screen is displayed.
Use ui to select “Text Search”, then press ENTER.
The keyboard input screen is displayed.
Enter the first character of the Internet Radio station or
file you want to search for, and then press “OK”.
0 For character input, see “Using the keyboard
screen” (v p. 203).
4
Use ui to select the content you want to play, then
press ENTER.
Playback starts.
0 “Text Search” searches for Internet Radio stations or files that start with the
entered first character from the displayed list.
NOTE
0 Text Search may not work for some lists.
Front panel
Display
Rear panel
154
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back music and a favorite picture at the same time (Slideshow)
n Supported input sources :
USB
n Supported input sources :
Internet Radio / Media Server
1
1
Play back a still picture.
0 Playing back still pictures stored on USB memory devices.
(v p. 110)
2
3
4
2
Play back a music file. (v p. 110)
0 Play back still pictures stored on Media Server. (v p. 133)
Play back a music file of Media Server or Internet Radio
station.
0 “Listening to Internet Radio” (v p. 129)
Press OPTION.
0 “Playing back files stored on a PC and NAS” (v p. 133)
The option menu screen is displayed.
3
Use ui to select “Slideshow”, then press ENTER.
The option menu disappears, and the picture you were viewing is
shown on the screen.
Front panel
Play back a still picture.
Display
Rear panel
4
155
Press OPTION.
The option menu screen is displayed.
Use ui to select “Slideshow”, then press ENTER.
The option menu disappears, and the picture you were viewing is
shown on the screen.
Remote
Index
Contents
Connections
Playback
Settings
Setting the Slideshow Interval
Tips
0 The “Slideshow Interval” settings are reflected for all input sources.
Set the playback interval when playing back a slideshow of still picture
(JPEG) files stored on a USB memory device or media server.
n Supported input sources:
USB / Media Server
1
2
3
4
While the list is displayed, press OPTION.
The option menu screen is displayed.
Use ui to select “Slideshow Interval”, then press
ENTER.
Use o p to set the display time.
Off:
The slide show is not played back.
5s - 60s
(Default: 5s):
Set the time for displaying a single
picture when playing back images in the
slide show.
Press ENTER.
Front panel
Display
Rear panel
Appendix
156
Remote
Index
Contents
Connections
Playback
Settings
Adjusting the volume of each channel
to match the input source (Channel
Level Adjust)
2
Press OPTION.
The option menu screen is displayed.
Use ui to select “Channel Level Adjust”, then press
ENTER.
The “Channel Level Adjust” screen is displayed.
3
4
Use ui to select the channel that you wish to adjust.
Use o p to adjust the volume.
–12.0 dB – +12.0 dB (Default : 0.0 dB)
5
Use uio p to select “Exit”, then press ENTER.
Front panel
Display
Rear panel
Appendix
0 Select “Reset” and press ENTER if you want to restore the adjustment values of
the various channels to “0.0 dB” (default).
0 Headphone volume can be adjusted when a headphone is connected.
0 “Channel Level Adjust” settings are stored for each input source.
0 You can only set this for speakers that output audio. In addition, you cannot set
this when in the menu “HDMI Audio Out” is set to “TV”. (v p. 222)
The volume of each channel can be changed while listening to music. You
can set this for each input source.
1
Tips
157
Remote
Index
Contents
Connections
Playback
Settings
Adjusting the tone (Tone)
4
Adjusts the tonal quality of the sound.
1
2
3
Press OPTION.
The option menu screen is displayed.
5
Use ui to select “Tone”, then press ENTER.
The “Tone” screen is displayed.
Tips
Appendix
Select “On” in step 3 and press i to select the sound
range to be adjusted.
Bass:
Adjust bass.
Treble:
Adjust treble.
Use o p to adjust the tone, then press ENTER.
-6 dB – +6 dB (Default : 0 dB)
Use o p to set the tone control function to on/off.
On:
Allow tone adjustment (bass, treble).
Off
(Default):
Playback without tone adjustment.
Front panel
Display
Rear panel
“Tone” settings are stored for each input source.
This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
This item cannot be set when “Dynamic EQ” is set to “On”. (v p. 213)
You cannot set this when no audio signal is input or in the menu “HDMI Audio Out”
is set to “TV”. (v p. 222)
0 This cannot be set when the input mode is set to “7.1CH IN”.
0
0
0
0
158
Remote
Index
Contents
Connections
Playback
Settings
Displaying your desired video during
audio playback (Video Select)
4
5
This unit can display video from a different source on TV during audio
playback. You can set this for each input source.
n Supported input sources:
iPod/USB / CDz / HD Radio / Online Music /
Bluetooth / Phono
Tips
If you selected “On” in step 3, press i and select
“Source”.
Use o p to select the input source for video you want
to play back, then press ENTER.
0 “Video Select” settings are stored for each input source.
z This cannot be set when any of the HDMI, component video or video
connectors are assigned.
1
2
3
Press OPTION during audio playback.
The option menu screen is displayed.
Use ui to select “Video Select”, then press ENTER.
Use o p to select the Video Select mode.
Off
(Default):
Disable Video Select mode.
On:
Enable Video Select mode.
Front panel
Display
Rear panel
159
Appendix
Remote
Index
Contents
Connections
Playback
Settings
Adjusting the picture quality for your
viewing environment (Picture Mode)
3
n Supported input sources :
CBL/SAT / DVD / Blu-ray / Game / AUX1 /
AUX2 / Media Player / iPod/USB /
Online Music / CDz / TV Audioz
z You can set the picture mode when an HDMI, component video or video
connector is assigned.
1
2
Press OPTION during video playback.
The option menu screen is displayed.
Use ui to select “Picture Mode”, then press ENTER.
4
Tips
Use o p to select picture mode.
Off:
No picture quality adjustment is done
with this unit.
Standard:
The standard mode suited for most
living room viewing environments.
Movie:
A mode suited for watching movies in a
dark room such as a theater room.
Vivid:
A mode that makes graphic images for
games, etc. brighter and more vivid.
Streaming:
A mode suited for low bit rate video
sources.
ISF Day:
A mode suited for watching movies in a
bright room during the day.
ISF Night:
A mode suited for watching movies in a
dark room at night.
Custom:
Adjusts the picture quality manually.
Press ENTER.
0 “Picture Mode” settings are stored for each input source.
Front panel
Display
Rear panel
160
Appendix
Remote
Index
Contents
Connections
Playback
Settings
1
You can play back the music being played back in MAIN ZONE
simultaneously in ZONE2 and ZONE3 (separate rooms).
It is useful when you want to enjoy the same music at the same time in
multiple rooms during home party or when you want to play back the same
BGM in the entire house.
2
3
Appendix
o Stopping the All Zone Stereo mode
Playing the same music in all zones (All
Zone Stereo)
1
Tips
During playback in All Zone Stereo mode, press
OPTION.
The option menu screen is displayed.
2
3
Press OPTION.
Use ui to select “All Zone Stereo”, then press ENTER.
Select “Stop”, then press ENTER.
The option menu screen is displayed.
Use ui to select “All Zone Stereo”, then press ENTER.
0 The All Zone Stereo mode is canceled even when the power supply of the MAIN
ZONE is turned off.
0 In the All Zone Stereo mode, only the “Multi Ch Stereo” and “Stereo” sound modes
can be selected.
0 When “HDMI Audio Out” is set to “TV”, the All Zone Stereo mode is not available.
(v p. 222)
0 When “Input Mode” is set to other than “7.1CH IN”, the All Zone Stereo mode is
available. (v p. 237)
Select “Start”, then press ENTER.
0 The input sources for ZONE2 and ZONE3 are switched to the
same input source as for MAIN ZONE, and playback starts in the
All Zone Stereo mode.
0 When you do not want ZONE2 or ZONE3 to participate in All
Zone Stereo, press ENTER to clear the check mark and then
press “Start”.
Front panel
Display
Rear panel
161
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Selecting a sound mode
This unit allows you to enjoy various kinds of surround and stereo
playback modes.
Disc formats such as Blu-ray Disc and DVD, as well as being supported by
digital broadcasting, and even by streaming movies and music from
internet-based subscription services.
This unit supports playback of almost all of these multi-channel audio
formats. It also supports surround playback of audio formats other than
multi-channel audio such as 2-channel stereo audio.
0 For audio formats recorded on a disc, see the disc jacket or label.
ui
GAME
PURE
.
MUSIC
MOVIE
Front panel
Display
Rear panel
162
Remote
Index
Contents
Connections
Playback
Settings
0 Press MOVIE, MUSIC or GAME to display a list of the sound modes
that can be selected. Each time you press MOVIE, MUSIC or GAME,
the sound mode changes.
0 While the list is displayed, you can also use ui to select a sound
mode.
0 Try out various sound modes and enjoy sound mode in your favorite
mode.
GExampleH When MOVIE is pressed
Press MOVIE, MUSIC or GAME to select a sound mode.
MOVIE :
Switches to the sound mode suitable for
enjoying movies and TV programs.
MUSIC :
Switches to the sound mode suitable for
enjoying music.
GAME :
Switches to the sound mode suitable for
enjoying games.
MOVIE SOUND
Stereo
0 The MOVIE, MUSIC, or GAME button memorizes the last sound mode selected for
its button. Pressing MOVIE, MUSIC, or GAME recalls the same sound mode as
the one selected at the previous playback.
0 If the content played back does not support the previously selected sound mode,
the most appropriate sound mode for the content is automatically selected.
0 This can also be set by pressing MOVIE, MUSIC or GAME on the main unit.
Dolby Surround
DTS Neural:X
Multi Ch Stereo
Virtual
.
Front panel
Display
Appendix
o Switching the sound mode
Selecting a sound mode
1
Tips
Rear panel
163
Remote
Index
Contents
Connections
Playback
Settings
Appendix
Pure Direct playback
Direct playback
This mode is for playback with higher sound quality than in Direct playback
mode.
This mode turns off the main unit display and analog video circuit. Doing
so suppresses noise sources that affect sound quality.
Sound recorded in source is played as is.
1
Tips
Press PURE to select “Direct”.
Direct playback begins.
1
0 While DSD signals are played back, “DSD Direct” is displayed.
0 This can also be set by pressing PURE DIRECT on the main unit.
Press PURE to select “Pure Direct”.
The display goes dark, and Pure Direct playback begins.
The PURE DIRECT indicator lights.
0 In Direct and Pure Direct sound modes, the following items cannot be adjusted.
0 Tone (v p. 158)
0 M-DAX (v p. 210)
0 MultEQ® XT32 (v p. 213)
0 Dynamic EQ (v p. 213)
0 Dynamic Volume (v p. 214)
0 Graphic EQ (v p. 216)
0 This can also be set by pressing PURE DIRECT on the main unit.
NOTE
0 Video signals are only output when HDMI signals are played in the Pure Direct
mode.
0 When the Pure Direct mode has been selected, the display turns off after about 5
seconds.
Front panel
Display
Rear panel
164
Remote
Index
Contents
Connections
Playback
Settings
Tips
Auto surround playback
This mode detects the type of input digital signal, and automatically
selects the corresponding mode for playback.
Perform stereo playback when the input signal is PCM. When the input
signal is Dolby Digital or DTS, the music is played back according to the
respective channel number.
1
Press PURE to select “Auto”.
Auto surround playback begins.
0 This can also be set by pressing PURE DIRECT on the main unit.
Front panel
Display
Rear panel
165
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
o Description of sound mode types
Dolby sound mode
Sound mode type
Description
Dolby Surround
This mode uses Dolby Surround Upmixer to extend various sources to natural and realistic multi channels for playback.
Use ceiling speakers such as top middle speakers to realize a three-dimensional sound field.
Dolby Digital
This mode can be selected when playing sources recorded in Dolby Digital.
Dolby TrueHD
This mode can be selected when playing sources recorded in Dolby TrueHD.
Dolby Digital Plus
This mode can be selected when playing sources recorded in Dolby Digital Plus.
Dolby Atmosz
This mode can be selected when playing back content encoded with Dolby Atmos.
It decodes Dolby Atmos content and its positioning data in real time and outputs audio from the appropriate speakers,
creating natural audio images regardless of the speaker layout. Use ceiling speakers and Dolby Atmos Enabled speakers
to realize a three-dimensional sound field.
z Can be selected when using the Surround Back, Front Wide, Front Height, Top Front, Top Middle, Top Rear, Rear Height, Front Dolby, Surround Dolby or Back Dolby
speakers.
Front panel
Display
Rear panel
166
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
DTS sound mode
Sound mode type
Description
DTS Surround
This mode can be selected when playing sources recorded in DTS.
DTS ES Dscrt6.1z
This mode is suitable for playing discs recorded in DTS-ES.
The surround back channel added using the discrete method is played as an independent channel.
Since all channels are independent, the 360-degree spacial expressiveness and sound localization are enhanced.
DTS ES Mtrx6.1z
This mode is suitable for playing discs recorded in DTS-ES.
The surround back channel added to the surround-left and surround-right channels by a matrix encoder at software
recording time is decoded by this unit’s matrix decoder and played from each channel (surround left, surround right,
surround back).
DTS 96/24
This mode can be selected when playing sources recorded in DTS 96/24.
DTS-HD
This mode can be selected when playing sources recorded in DTS-HD.
DTS Express
This mode can be selected when playing sources recorded in DTS Express.
DTS:X
This mode can be selected when playing back content encoded with DTS:X.
It decodes DTS:X content and its positioning data in real time and outputs audio from the appropriate speakers, creating
natural audio images regardless of the speaker layout. Use height speakers to realize a three-dimensional sound field.
DTS Neural:X
This mode uses DTS Neural:X Upmixer to extend various sources to natural and realistic multi channels for playback.
Use height speakers such as front height speakers to realize a three-dimensional sound field.
z This can be selected when “Speaker Config.” - “Surr. Back” is not set to “None”. (v p. 259)
Front panel
Display
Rear panel
167
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Upgrade (Auro-3D)
Auro-3D sound mode
Sound mode type
Description
Auro-3D
This mode uses an Auro-3D decoder to create three-dimensional audio output using the Height Channel. It is ideal for
playback of signals encoded as Auro-3D with a Height Channel. If signals not encoded as Auro-3D are input, an Upmixer
called the Auro-Matic is used to create highly realistic three-dimensional audio output.
Auro-2D Surround
This mode uses an Auro-3D decoder to create Surround Sound without a Height Channel. It is ideal for playback of signals
encoded as Auro-3D without a Height Channel. If signals not encoded as Auro-3D are input, an Upmixer called the AuroMatic is used to output Surround Sound.
Front panel
Display
Rear panel
168
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
PCM multi-channel sound mode
Sound mode type
Multi Ch In
Audyssey
Description
This mode can be selected when playing multi-channel PCM/DSD sources.
DSX®
sound mode
Sound mode type
Audyssey
DSX®
(A-DSX)z
Description
This mode creates playback for the new channels (front wide or front height) in 5.1-channel systems. By adding front wide
or front height channels, the surround sound effects sound become more three dimensional and realistic.
z This can be selected when a setting other than “None” is selected for “Front Height” or “Front Wide”, and a setting other than “None” is selected for “Center” in “Speaker
Config.”. (v p. 257)
Front panel
Display
Rear panel
169
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Original sound mode
Sound mode type
Description
Multi Ch Stereo
This mode is for enjoying stereo sound from all speakers.
Virtual
This mode lets you experience an expansive surround sound effect when playing back through just the front (L/R)
speakers only, and when listening with stereo headphones.
Auto sound mode
Sound mode type
Auto
Front panel
Description
In this mode, the type of digital signal input, such as Dolby Digital, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX,
Dolby Atmos, DTS, DTS-HD, DTS:X, DTS-ES, PCM (multi-channel) is detected, and the playback mode switches
automatically to the corresponding mode.
If the input signal is analog or PCM (2-channel), stereo playback is used. For Dolby Digital or DTS, the music is played
back according to the respective channel number.
Display
Rear panel
170
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Stereo sound mode
Sound mode type
Stereo
Description
This mode plays 2-channel stereo audio with no additional surround sound processing.
0 Sound is output from the front left and right speakers, and subwoofer if connected.
0 When multi-channel signals are inputted, they are mixed down to 2-channel audio and are played back with no
additional surround sound processing.
Direct sound mode
Sound mode type
Description
Direct
This mode plays back audio as recorded in the source.
Pure Direct
This mode plays back an even higher quality sound than the “Direct” mode.
The following circuits are stopped in order to further improve sound quality.
0 Display indicator circuit of the main body (display will go off.)
0 The analog video input/output switcher and processor is disabled.
Front panel
Display
Rear panel
171
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Sound mode that can be selected for each input signal
0 The following sound modes can be selected using the MOVIE, MUSIC and GAME buttons.
.
0 Adjust the sound field effect with the menu “Surround Parameter” to enjoy surround sound the way you like it. (v p. 205)
Input signal
2-channel z1
Sound mode
MOVIE button
S
S
S
S
S
Stereo
Dolby Surround
DTS Neural:X z2
Multi Ch Stereo
Virtual
MUSIC button
S
S
S
S
S
GAME button
S
S
S
S
S
z1 2-channel also includes analog input.
z2 This mode plays back 2-channel sources in 5.1, 7.1, 9.1 or 11.1-channel playback. It cannot be selected when headphones are used or when the speaker configuration is
front speakers only.
Front panel
Display
Rear panel
172
Remote
Index
Connections
Playback
Settings
Tips
Appendix
.
Contents
Input signal
Multi-channel z3
Dolby Digital
Dolby TrueHD
Dolby Digital Plus
Dolby Atmos
DTS
Sound mode
Stereo
Dolby Digital
Dolby Digital + Dolby Surround
Dolby Digital A-DSX z4
Dolby TrueHD
Dolby TrueHD + Dolby Surround z5
Dolby Atmos z6
Dolby TrueHD A-DSX z4
Dolby Digital Plus
Dolby Digital Plus + Dolby Surround z5
Dolby Atmos z6
Dolby Digital Plus A-DSX z4
Dolby Atmos
DTS Surround
DTS ES Dscrt 6.1
DTS ES Mtrx 6.1
DTS 96/24
DTS + Neural:X
DTS Surround A-DSX z4
MOVIE button
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
MUSIC button
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
GAME button
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
z3 The sound mode that can be selected differs depending on the audio format of the input signal and the number of channels. For details, see “Types of input signals, and
corresponding sound modes” (v p. 343).
z4 These modes add new channels to 5.1-channel surround using Audyssey DSX® processing. (v p. 215)
z5 This can be selected when the input signal does not contain Dolby Atmos.
z6 This can be selected when the input signal contains Dolby Atmos.
Front panel
Display
Rear panel
173
Remote
Index
Connections
Playback
Settings
Tips
Appendix
.
Contents
Input signal
DTS-HD /
DTS Express
DTS:X
PCM multi-channel
Multi-channel z3
Sound mode
DTS-HD HI RES
DTS-HD MSTR
DTS-HD MSTR A-DSX z4
DTS Express
DTS Express A-DSX z4
DTS-HD + Neural:X
DTS-HD HI RES A-DSX z4
DTS:X
DTS:X MSTR
Multi Ch In
Multi Ch In 7.1
Multi In + Dolby Surround
Multi In A-DSX z4
Multi Ch In + Neural:X
Multi Ch Stereo
Virtual
MOVIE button
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
MUSIC button
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
GAME button
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
z3 The sound mode that can be selected differs depending on the audio format of the input signal and the number of channels. For details, see “Types of input signals, and
corresponding sound modes” (v p. 343).
z4 These modes add new channels to 5.1-channel surround using Audyssey DSX® processing. (v p. 215)
Front panel
Display
Rear panel
174
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
.
Upgrade (Auro-3D)
Input signal
2-channel z1 /
Multi-channel z3
Sound mode
Auro-3D z7
Auro-2D Surround z8
MOVIE button
S
S
MUSIC button
S
S
GAME button
S
S
z1 2-channel also includes analog input.
z3 The sound mode that can be selected differs depending on the audio format of the input signal and the number of channels. For details, see “Types of input signals, and
corresponding sound modes” (v p. 343).
z7 It cannot be selected when headphones are used, or when a speaker configuration without front height speakers is used.
z8 It cannot be selected when headphones are used, or when only front speakers are used.
Front panel
Display
Rear panel
175
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Views on the display
.
Blu-ray
Dolby D +
S
q
w
A Shows a decoder to be used.
0 In the case of the Dolby Digital Plus decoder, “Dolby D +” is
displayed.
B Shows a decoder that creates sound output.
0 “k” indicates that the Dolby Surround decoder is being used.
Front panel
Display
Rear panel
176
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
HDMI control function
A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with
another device via the HDMI cable connection.
Setting procedure
1
2
3
5
Enable the HDMI control function of this unit.
Set “HDMI Control” to “On”. (v p. 223)
Turn the power on for all the devices connected by
HDMI cable.
6
Set the HDMI control function for all devices connected
by HDMI cable.
0 Some functions may not operate depending on the connected TV or player. Check
the owner’s manual of each device for details beforehand.
0 The HDMI ZONE2 function is not compatible with the HDMI control function.
0 When the HDMI ZONE2 function is used with “HDMI Control” in the menu set to
“On”, the HDMI ZONE2 function may not fully work.
devices to check the settings.
0 Carry out steps 2 and 3 should any of the devices be unplugged.
Switch the television input to the HDMI input connected
to this unit.
Front panel
Display
Rear panel
When you turn the TV’s power to standby, check that
the power of this unit also goes to standby.
NOTE
0 Please consult the operating instructions for the connected
4
Switch the input source of this unit to check that video
from the player connected by HDMI is played back
correctly.
177
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Smart Menu function
This function can be used to configure the settings of this unit, select an
input source and set HD Radio and Internet Radio stations using the TV
remote control.
2
3
Enjoy content from the input source currently selected on this unit.
o Source
Enable the HDMI control function of this unit and the
TV. (v p. 223)
Switch the input of this unit.
If you select “Online Music”, “iPod/USB” or “HD Radio”, you can
continue to operate this unit using the TV remote control.
Set “Smart Menu” to “On” on this unit. (v p. 226)
Select “AV Receiver” in a TV menu such as “Input”z or
“Operate Connected HDMI Device”z.
o Sound Mode
The Smart Menu of this unit is displayed on the TV.
0 This unit can be operated with the TV remote control while the
Smart Menu is displayed.
Change the sound mode of this unit.
You can select from the following three sound modes.
z The selection method differs depending on your TV.
Surround:
Surround sound playback according to
the input signal.
Stereo:
Stereo playback.
Multi Ch Stereo:
Multi-channel stereo playback.
Smart Menu
Now Playing
Source
Sound Mode
Setup Menu
Smart
Smart Select 2
Smart Select 3
Smart Select 4
Blu-ray
Smart Select 1
Help
.
1
o Now Playing
Front panel
Display
Rear panel
178
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Setup Menu
Displays a setup menu for configuring the settings of this unit.
o Smart Select
Calls up the SMART SELECT items registered to this unit.
NOTE
0 If the “HDMI Control” or “Smart Menu” settings have been changed, always reset
the power to connected devices after the change.
0 The Smart Menu function may not work properly depending on the specifications
of your TV. In this case, set “Smart Menu” to “Off”. (v p. 226)
Front panel
Display
Rear panel
179
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Sleep timer function
You can have the power automatically switched to standby once a set time
has elapsed. This is convenient for viewing and listening while going to
sleep. The sleep timer function can be set for each zone.
ZONE SELECT
.
SLEEP
Front panel
Display
Rear panel
180
Remote
Index
Contents
Connections
Playback
Settings
2
Appendix
o Checking the remaining time
Using the sleep timer
1
Tips
Press SLEEP when the sleep timer is in operation.
The remaining time appears on the display.
Press ZONE SELECT to switch “MAIN”, “ZONE2” or
“ZONE3”.
o To cancel the sleep timer
Press SLEEP and display the time you want to set.
Press SLEEP to select “Off”.
The sleep timer indicator on the display turns off.
0 The sleep timer indicator lights up on the display and the sleep
timer starts.
0 You can set the sleep timer in the range from 10 to 120 minutes in
0 The sleep timer setting is canceled when the unit switches to standby mode.
steps of 10 minutes.
NOTE
0 The sleep timer function cannot turn off the power of devices connected to this
unit. To turn off the power of those connected devices, set up sleep timers on the
connected devices themselves.
Front panel
Display
Rear panel
181
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Smart select function
Settings such as the input source, volume level and sound mode can be
registered to the SMART SELECT 1 - 4 buttons.
You can simply press one of the registered SMART SELECT buttons in
subsequent playbacks to switch to the group of saved settings in a batch.
By saving frequently used settings at the SMART SELECT 1 – 4 buttons,
you will always be able to easily call up the same playback environment.
The Smart Select function can be memorized for each zone.
ZONE
SELECT
.
SMART
SELECT
1–4
Front panel
Display
Rear panel
182
Remote
Index
Contents
Connections
Playback
Settings
Tips
Calling up the settings
1
2
Press ZONE SELECT to switch “MAIN”, “ZONE2” or
“ZONE3”.
Press SMART SELECT.
The Smart Select settings registered to the button you pressed are
called up.
0 The default settings for the input source and volume are as shown
below.
GMAIN ZONEH / GZONE2H / GZONE3H
Button
Input source
Volume
SMART SELECT 1
CBL/SAT
40
SMART SELECT 2
Blu-ray
40
SMART SELECT 3
Media Player
40
SMART SELECT 4
Online Music
40
Front panel
Display
Rear panel
183
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Changing the settings
1
2
Set the items below to the settings you want to
register.
3
The following settings from A to I can be memorized for MAIN
ZONE, and settings A and B can be memorized for ZONE2 and
ZONE3.
Tips
Press ZONE SELECT to switch “MAIN”, “ZONE2” or
“ZONE3”.
Press and hold the desired SMART SELECT until
“Smartz Memory”, “Z2 Smartz Memory” or “Z3
Smartz Memory” appears on the display.
The current settings will be memorized.
z is displayed the number for the SMART SELECT button you
pressed.
A Input source (v p. 103)
B Volume (v p. 104)
C Sound mode (v p. 162)
D Audyssey (Audyssey MultEQ® XT32, Audyssey Dynamic EQ®,
Audyssey Dynamic Volume®, Audyssey LFC™) (v p. 212)
E “M-DAX” (v p. 210)
F “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 157)
G “Displaying your desired video during audio playback (Video
Select)” (v p. 159)
H “Adjusting the picture quality for your viewing environment
(Picture Mode)” (v p. 160)
I “Video Output” (v p. 222)
o Changing the Smart Select Name
The MAIN ZONE Smart Select name displayed on the TV screen or
display of this unit can be changed to a different name.
For the name change method, see “Smart Select
Names” (v p. 284).
0 Press and hold SMART SELECT while a radio station is being received or a
track is being played back with any of the following sources, the current
radio station or track is memorized.
0 HD Radio / Internet Radio / Media Server / Pandora / SiriusXM /
Favorites / iPod/USB
Front panel
Display
Rear panel
Appendix
184
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Web control function
You can control this unit from a web control screen on a web browser.
PC
Router
Controlling the unit from a web control
1
This unit
2
Switch the “Network Control” setting to “Always On”.
(v p. 276)
Check the IP address of this unit with “Information”.
(v p. 270)
Network/Information
Friendly Name
DHCP
Connection
IP Address
MAC Address
Marantz SR7010
On
Wired (Ethernet)
192.168.100.19
zzzzzz-000000
Checking the IP address.
.
Tablet
Displays the current network settings of the AVR
Front panel
Display
Rear panel
.
0 This unit and the PC or tablet need to be connected correctly to the network in
order to use the web control function. (“Connecting to a home network
(LAN)” (v p. 97))
0 Depending on the settings of your security-related software, you may not be able
to access this unit from your PC. If this is the case, then change the settings of the
security-related software.
3
185
Start up the web browser.
Remote
Index
Contents
Playback
Settings
5
Enter the IP address of this unit in browser’s address
box.
For example, if the IP address of this unit is “192.168.100.19”, enter
“http://192.168.100.19”.
Tips
Setup Menu
MAIN ZONE
CBL/SAT
Audio
http://192.168.100.19
File
Edit View
Appendix
When the top menu is displayed, click on the menu
item you want to operate.
Video
Favorites Tools Help
ZONE2
Online Music
Inputs
ZONE3
CBL/SAT
.
Speakers
Network
General
Save
Load
.
4
Connections
0 You can use the “Save” and “Load” functions to store or recall various function
settings using web control from a PC.
0 To memorize settings, click “Save” on the Setup Menu screen.
0 To call up settings, click “Load” on the Setup Menu screen.
0 We recommend using one of the following web browsers.
Internet Explorer 10 and above
Mozilla Firefox 24 and above
Google Chrome 29 and above
Safari 5.x and above
Front panel
Display
Rear panel
186
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Panel lock function
To prevent accidental operation of this unit, you can disable operation of
the buttons on the front panel.
X
Disabling all key button operations
1
ui ENTER
2
3
.
2
3
Display
Use ui to select “P/V LOCK On”.
Press ENTER to enter the setting.
All button operations except X are disabled.
Disabling all button operations except
VOLUME
BACK
1
Front panel
Press X while you press and hold BACK and ENTER
with the unit in standby mode.
Rear panel
187
Press X while you press and hold BACK and ENTER
with the unit in standby mode.
Use ui to select “FP LOCK On”.
Press ENTER to enter the setting.
All button operations except X and VOLUME are disabled.
Remote
Index
Contents
Connections
Playback
Settings
Tips
Canceling the Panel lock function
1
2
3
Press X while you press and hold BACK and ENTER
with the unit in standby mode.
Use ui to select “FP LOCK zOff”.
(z The currently set mode.)
Press ENTER to enter the setting.
The Panel lock function is canceled.
0 Even when the Panel lock function is set, you can operate the unit using the
remote control unit.
Front panel
Display
Rear panel
188
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Remote lock function
When connecting an IR receiver, enable the Remote lock function. When
the function is enabled, you can not perform operations with the remote
control unit.
By default, this function is disabled.
X
Disabling the sensor function of the
remote control unit
1
ui ENTER
2
3
Press X while you press and hold BACK and ENTER
with the unit in standby mode.
Use ui to select “RC LOCK On”.
Press ENTER to enter the setting.
Enabling the remote sensor function
1
.
BACK
2
3
Front panel
Display
Rear panel
189
Press X while you press and hold BACK and ENTER
with the unit in standby mode.
Use ui to select “RC LOCK zOff”.
(z The currently set mode.)
Press ENTER to enter the setting.
Infrared light receiving function on the main unit is enabled.
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Switches light illumination on/off
You can switch the light illumination around the main display on or off.
The default setting is “On”.
Light illumination
1
Press and hold DIMMER on the main unit for 3
seconds.
0 Carry out the same procedure if you want to change the settings
again.
.
DIMMER
Front panel
Display
Rear panel
190
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playback in ZONE2/ZONE3 (Separate room)
You can operate this unit to enjoy video and audio in a room (ZONE2 and ZONE3) that is different from the room where this unit is placed (MAIN ZONE).
You can simultaneously play back the same source in both the MAIN ZONE, ZONE2 and ZONE3. You can also play back separate sources in the MAIN
ZONE, ZONE2 and ZONE3.
Connecting ZONE
You can use the following three methods to play back video and audio in
ZONE2 and ZONE3.
0 “Connection through the HDMI ZONE2 connector” (v p. 191)
0 “Connection through the video output connector and speaker output
connector” (v p. 192)
0 “Connection through the video output connector and external power
amplifiers” (v p. 194)
o Connection 1 : Connection through the HDMI
ZONE2 connector
When a TV is connected to the HDMI ZONE2 OUT connector, you can
play back a video or audio from the device connected to the HDMI 1 –
7 IN connector in ZONE2 (HDMI ZONE2 function).
ZONE2
MAIN ZONE
HDMI
ZONE2
.
HDMI
0 When a TV is connected to the HDMI ZONE2 OUT connector, and the MAIN
ZONE and ZONE2 are set to the same input source, the MAIN ZONE audio may
be mixed down to 2-channel audio.
Front panel
Display
Rear panel
191
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Connection 2 : Connection through the video output connector and speaker output connector
When “Assign Mode” in the menu is set to any of the following audio is output from speakers in ZONE2 or ZONE3. (v p. 249)
n Assign Mode: 7.1ch + ZONE2
n Assign Mode: 7.1ch + ZONE3
MAIN ZONE
This unit
ZONE2
ZONE3
MAIN ZONE
This unit
VIDEO
(L)
COMPONENT VIDEO
IN
Y
PB PR
w
.
VIDEO
IN
or
(L)
q
w
q
.
w
(R)
Front panel
Display
Rear panel
192
Remote
Index
(R)
qw
q
Contents
Connections
Playback
Settings
Tips
Appendix
n Assign Mode: 7.1ch + ZONE2/3-MONO
MAIN ZONE
This unit
ZONE2
ZONE3
VIDEO
COMPONENT VIDEO
IN
Y
PB PR
VIDEO
IN
w
or
q
.
w
Front panel
Display
Rear panel
193
Remote
Index
q
Contents
Connections
Playback
Settings
Tips
Appendix
o Connection 3 : Connection through the video output connector and external power amplifiers
The audio signals of this unit’s ZONE2 and ZONE3 audio output connectors are played on the ZONE2 and ZONE3 power amplifiers.
ZONE2
MAIN ZONE
ZONE3
VIDEO
VIDEO
IN
This unit
COMPONENT VIDEO
IN
Y
PB PR
Power amplifier
AUX IN
or
Power amplifier
L
R
AUX IN
.
L
R
Front panel
Display
Rear panel
194
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
0 The analog audio signal and the 2-channel PCM signal input from HDMI connector or digital connectors (OPTICAL/COAXIAL) can be played back in ZONE2.
0 If you want to play back HDMI signals other than 2-channel PCM in ZONE2, set “HDMI Audio” to “PCM”. (v p. 282) 2-channel PCM signals are output from a device
connected to the input source selected for ZONE2 and can be played back in ZONE2.
In this case, the MAIN ZONE audio will also be converted to 2-channel PCM signals if the MAIN ZONE and ZONE2 are set to the same input source. However, depending on
the playback device, the playback signal may not be converted to PCM even if this setting is configured.
0 The analog audio signal and the 2-channel PCM signal input from digital connectors (OPTICAL/COAXIAL) can be played back in ZONE3.
0 When “Component Video Out” in the menu is set to “ZONE2”, the component video output connector outputs the ZONE2 video. (v p. 231)
0 The menu screen is not output in ZONE2.
Front panel
Display
Rear panel
195
Remote
Index
Contents
Connections
Playback
Settings
Playback in ZONE2/ZONE3
1
2
POWER X
ZONE SELECT
3
Input source
select buttons
Press ZONE SELECT to switch “ZONE2” or “ZONE3”.
Press POWER X to turn on the ZONE2 or ZONE3 power.
The multi zone power indicator on the display lights.
0 Power in ZONE2 or ZONE3 can be turned on or off by pressing
ZONE2 ON/OFF or ZONE3 ON/OFF on the main unit.
Press the input source select button to select the input
source to be played.
.
Front panel
Display
Rear panel
Appendix
The audio signal of the selected source is output to ZONE2 or
ZONE3.
0 To perform an operation with the main unit, press ZONE
SELECT. Each time you press ZONE SELECT, the input source
changes.
VOLUME df
MUTE :
Tips
196
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Adjusting the volume (ZONE2/ZONE3)
Use VOLUME df to adjust the volume.
0 At time of purchase, “Volume Limit” is set to “70 (–10 dB)”.
(v p. 283)
0 Turn VOLUME after pressing ZONE SELECT on the main unit to adjust the
volume.
o Turning off the sound temporarily (Muting)
(ZONE2/ZONE3)
Press MUTE :.
The sound is reduced to the level set at “Mute Level” in the menu.
(v p. 284)
0 To cancel mute, either adjust the sound volume or press MUTE :
again.
Front panel
Display
Rear panel
197
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Detailed items
Description
Page
Dialog Level Adjust
This setting adjusts the output level to clarify the dialogue output from the center
channel.
204
Subwoofer Level Adjust
This setting adjusts the volume level for the subwoofer.
204
Surround Parameter
Adjusts surround sound parameters.
205
M-DAX
Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
210
Audio Delay
Compensates for incorrect timing between video and audio.
211
Volume
Sets the MAIN ZONE (room where the unit is located) volume setting.
211
.
Setting items
Audio
.
Video
Front panel
Audyssey
Makes Audyssey
XT32, Audyssey Dynamic
Audyssey Dynamic
Volume®, Audyssey LFCTM and Audyssey DSX® settings.
212
Graphic EQ
Uses the graphic equalizer to adjust the tone of each speaker.
216
Picture Adjust
Adjusts picture quality.
219
HDMI Setup
Makes settings for HDMI video/audio output.
221
Output Settings
Makes settings for video output.
227
Component Video Out
Sets whether to use the component video output connector for MAIN ZONE or ZONE2.
231
On Screen Display
Configures the on-screen display settings.
231
TV Format
Sets the video signal format to be output for the TV you are using.
232
Display
MultEQ®
Rear panel
198
EQ®,
Remote
Index
Contents
.
Setting items
Inputs
Connections
Playback
Settings
Detailed items
Tips
Appendix
Description
Page
Input Assign
Changes input connector assignment.
233
Source Rename
Changes the display name for input source.
235
Hide Sources
Removes from the display input sources that are not used.
236
Source Level
Adjusts the playback level of the audio input.
236
Input Select
Sets the audio input mode and decode mode.
237
Audyssey® Setup
The acoustic characteristics of the connected speakers and listening room are
measured and the optimum settings are made automatically.
238
Manual Setup
Sets up the speakers manually or changes the Audyssey® Setup settings.
249
Information
Displays network information.
270
Connection
Selects whether to connect the home network to a wireless LAN or a wired LAN.
270
Settings
Used for manually setting the IP address or when using a proxy server.
274
Network Control
Enables network communication in standby power mode.
276
Friendly Name
The “Friendly Name” is the name of this unit displayed on the network. You can change
the Friendly Name according to your preferences.
276
Diagnostics
Used to check the network connection.
277
Maintenance Mode
Used when receiving maintenance from a Marantz service engineer or custom installer.
This mode is not designed for use by the end user, and should only be used by a trained
service technician or custom installation professional.
278
.
Speakers
.
Network
Front panel
Display
Rear panel
199
Remote
Index
Contents
Connections
Setting items
Playback
Settings
Detailed items
Tips
Appendix
Description
Page
Changes the language of the display on the TV screen.
279
ECO
Configures the ECO Mode and Auto Standby energy-saving functions.
279
ZONE2 Setup/
ZONE3 Setup
Makes settings for audio playback with ZONE2 and ZONE3.
282
Zone Rename
Changes the display title of each zone to one you prefer.
284
Smart Select Names
Changes the Smart Select Name display title to one you prefer.
284
Trigger Out 1/
Trigger Out 2
Select the conditions for activating trigger out function.
285
Front Display
Makes settings related to the display on this unit.
285
Firmware
Checks for the latest firmware information about updates and upgrades, updates the
firmware, and sets up the notification message display.
287
Information
Shows information about this unit settings, input signals, etc.
289
Usage Data
Selects whether or not to send anonymous usage data to Marantz.
290
Setup Lock
Protects settings from inadvertent changes.
Begin Setup...
Performs basic installation/connections/settings from the beginning according to the
guidance indicated on the TV screen.
Language Select
Sets individual setting items according to the guidance displayed on the TV screen.
.
Language
General
291
Speaker Setup
.
Setup Assistant Speaker Calibration
Network Setup
TV Audio Connection
Input Setup
Front panel
Display
Rear panel
200
Remote
Index
Page 9 of
the separate
manual
“Quick Start
Guide”
Contents
Connections
Playback
Settings
Tips
Appendix
Menu operations
1
2
ZONE SELECT
3
4
5
uio p
ENTER
Press ZONE SELECT to switch “MAIN”.
Press SETUP.
The menu is displayed on the TV screen.
Use ui p to select the menu to be set or operated,
then press ENTER.
Use o p to change to desired setting.
Press ENTER to enter the setting.
0 To return to the previous item, press BACK.
0 Exiting the menu, press SETUP while the menu is displayed. The
menu display disappears.
SETUP
.
BACK
Front panel
Display
Rear panel
201
Remote
Index
Contents
Connections
Playback
Settings
Tips
Inputting characters
0 On this unit, you can change the name displayed on the following screens to the names that you prefer.
0 Preset Name (v p. 125)
0 Text Search (v p. 154)
0 Source Rename (v p. 235)
0 Friendly Name (v p. 276)
0 Zone Rename (v p. 284)
0 Smart Select Names (v p. 284)
0 Character input for the network functions
Front panel
Display
Rear panel
202
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Using the keyboard screen
1
3
Display the screen for inputting characters.
GExampleH “Source Rename” screen
Inputs/Source Rename
CBL/SAT
Insert
Delete
A B C D E
F G H
N O P Q R
S
I
J
K
L M
T U V W X Y
Z
0 1 2 3 4 5 6 7 8 9
!
$ % &
< = >
a/A
4
CBL/SAT
Clear
‘
(
)
* +
Space
,
;
Cancel
“
5
6
#
O K
Select a character to be input with uio p then press
ENTER.
Repeat steps 2 - 4 to change the name.
Use uio p to select “OK”, then press ENTER.
.
Changes the display name for this source
Press ENTER to move the cursor to the character that
you wish to change.
0 Each time ENTER is pressed, the cursor moves by one
character.
2
Use uio p to select , or ..
Front panel
Display
Rear panel
203
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Audio
Make audio-related settings.
Dialog Level Adjust
Subwoofer Level Adjust
This setting adjusts the output level to clarify the dialogue output from the
center channel.
This setting adjusts the volume level for the subwoofer.
o Subwoofer Level Adjust
o Dialog Level Adjust
Set whether to adjust the subwoofer level.
Set whether to adjust the dialog level or not.
On:
Enables the adjustment of the dialog
level.
Off
(Default):
Disables the adjustment of the dialog
level.
Enables the adjustment of the subwoofer
level.
Off
(Default):
Disables the adjustment of the subwoofer
level.
o Subwoofer 1 Level /Subwoofer 2 Level
o Level
Adjusts the volume level for the Subwoofer 1 and Subwoofer 2.
Adjusts the volume output from the center channel.
–12.0 dB – +12.0 dB (Default : 0.0 dB)
–12.0 dB – +12.0 dB (Default : 0.0 dB)
Front panel
On:
Display
Rear panel
204
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Loudness Management
Surround Parameter
This sets whether to output as specified in “Dynamic Compression” or
output directly without compressing the dynamic range of audio
recorded in the disc.
You can adjust the surround audio sound field effects to match your
preferences.
The items (parameters) that can be adjusted depend on the signal being
input and the currently set sound mode. For details on the adjustable
parameters, see “Sound modes and surround parameters” (v p. 339).
On
(Default):
Outputs are given based on enabling the
settings made in “Dynamic Compression”
and Dialog normalization function.
0 Some setting items cannot be set while playback is stopped. Make the settings
during playback.
0 “Surround Parameter” settings are stored for each sound mode.
Off:
“Dynamic Compression” settings and
Dialogue Normalization are disabled, and
the signals on the disc are output as is.
o Cinema EQ
0 “Loudness Management” can be set when Dolby Digital, Dolby Digital Plus,
Dolby TrueHD and Dolby Atmos signal is input.
Gently softens the upper treble range of movie soundtracks to reduce
possible harshness and improve clarity.
On:
“Cinema EQ” is used.
Off
(Default):
“Cinema EQ” is not used.
Front panel
Display
Rear panel
205
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Low Frequency Effects
o Dynamic Compression
Adjust the low frequency effects level (LFE).
Compress dynamic range (difference between loud and soft sounds).
Auto:
Automatic dynamic range compression
on/off control according to source.
Low / Medium / High:
These set the compression level.
Off:
Dynamic range compression is always
off.
n When “Input Mode” is set other than to “7.1CH IN”
-10 dB – 0 dB (Default : 0 dB)
n When “Input Mode” is set to “7.1CH IN”
0 dB / +5 dB / +10 dB / +15 dB (Default: +10 dB)
0 “Dynamic Compression” can be set when Dolby Digital, Dolby Digital Plus,
Dolby TrueHD or Dolby Atmos signal is input.
0 The default setting is “Off”. When the input signal is the Dolby TrueHD or
Dolby Atmos source, the default setting is “Auto”.
0 For proper playback of the different sources, we recommend setting to the
values below.
0 Dolby Digital sources : 0 dB
0 DTS movie sources : 0 dB
0 DTS music sources: -10 dB
o Dialog Control
Adjust the volume of dialog in movies, vocals in music, etc. so these
can be heard more easily.
0 – 6 (Default : 0)
0 This can be set when a DTS:X signal that is compatible with the Dialog Control
function is input.
Front panel
Display
Rear panel
206
Remote
Index
Contents
Connections
Playback
Settings
o Center Spread
Tips
Appendix
o DTS Neural:X
Center spread expands the center channel signal to left and right front
speakers to create a wider frontal audio image for the listener. It is
optimized and designed primary for playback of stereo music content.
On:
Use “Center Spread”.
Off
(Default):
Do not use “Center Spread”.
DTS Neural:X Expands the non-object based audio signals and
optimizes them for your speaker configuration.
On
(Default):
Use “DTS Neural:X”.
Off:
Do not use “DTS Neural:X”.
0 You can set this when sound mode is “DTS:X” or “DTS:X MSTR”.
0 You can set this when sound mode is “Dolby Surround”.
Front panel
Display
Rear panel
207
Remote
Index
Contents
Connections
Playback
Settings
Upgrade (Auro-3D)
Tips
Upgrade (Auro-3D)
o Auro-Matic 3D Preset
o Auro-Matic 3D Strength
Selects the Auro-Matic 3D Preset for fine tuning the Auro-3D
experience to specific audio material.
Small:
Small is ideal for pop and chamber music
or movies with a lot of dialog. (e.g.
comedy)
Medium
(Default):
Medium is best used on jazz music or
typical movies and TV shows.
Large:
Large is ideal for recordings that were
recorded in large spaces. (e.g. orchestral
recordings or action movies with big
explosions.)
Speech:
Speech is ideal for recordings which are
mostly dialog (e.g. news broadcast), and
that have virtually no inherent spatial
information.
Changes the level of the up-mixed channels in relation to the original
input signal.
The value ranges from 1 (no up-mixing) to 16 (Maximum level,
providing maximum effect).
1 - 16 (Default:10)
0 You can set this when the sound mode is set to Auro-3D.
0 This cannot be set if the input signal contains Auro-3D signals containing a
Height channel.
0 You can set this when the sound mode is set to Auro-3D.
0 This cannot be set if the input signal contains Auro-3D signals containing a
Height channel.
Front panel
Appendix
Display
Rear panel
208
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Subwoofer
o Speaker Select
Makes settings for the speakers outputting sound.
Turn subwoofer output on and off.
Floor
(Default):
Plays back without height speakers.
On
(Default):
The subwoofer is used.
Floor & Height:
Plays back with height speakers.
Off:
The subwoofer is not used.
Front:
Plays back only with speakers in front of
the surround speaker.
0 You can set this when the sound mode is “Direct” or “Stereo” and in the menu
“Subwoofer Mode” is set to “LFE+Main”. (v p. 266)
0 This can be set when the sound mode is the original sound mode.
o Set Defaults
The “Surround Parameter” settings are returned to the default settings.
Front panel
Display
Rear panel
209
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
M-DAX
0 The M-DAX indicator lights.
0 This item can be set with analog signals or PCM signal (Sample Rate =
44.1/48 kHz) is input.
0 This item default setting for “Online Music”, “iPod/USB” and “Bluetooth” is
“Low”. All others are set to “Off”.
0 This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
0 This cannot be set when the input mode is set to “7.1CH IN”.
0 “M-DAX” settings are stored for each input source.
0 This can also be set by pressing M-DAX on the main unit.
Compressed audio formats such as MP3, WMA (Windows Media Audio)
and MPEG-4 AAC reduce the amount of data by eliminating signal
components that are hard for the human ear to hear. The “M-DAX”
function generates the signals eliminated upon compression, restoring the
sound to conditions near those of the original sound before compression.
It also restores the original bass characteristics for a rich and expanded
tonal range.
o Mode
High:
Optimized mode for compressed sources
with very weak highs (64 kbps and
under).
Medium:
Apply suitable bass and treble boost for
all compressed sources (96 kbps and
under).
Low:
Optimized mode for compressed sources
with normal highs (96 kbps and over).
Off:
Do not use “M-DAX”.
Front panel
Display
Rear panel
210
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Limit
Audio Delay
Make a setting for maximum volume.
Compensates for incorrect timing between video and audio.
60 (–20 dB) / 70 (–10 dB) / 80 (0 dB)
0 ms – 200 ms (Default : 0 ms)
Off (Default)
o Power On Level
0 Audio Delay for game mode can be set when “Video Mode” is set to “Auto” or
“Game”. (v p. 227)
0 This cannot be set when the input mode is set to “7.1CH IN”.
0 “Audio Delay” settings are stored for each input source.
Define the volume setting that is active when the power is turned on.
Volume
Set the MAIN ZONE (room where the unit is located) volume setting.
Last
(Default):
Use the memorized setting from the last
session.
Mute:
Always use the muting on condition when
power is turned on.
1 – 98 (–79 dB – 18 dB) :
The volume is adjusted to the set level.
o Scale
Set how volume is displayed.
0 - 98
(Default):
Display in the range 0 (Min) to 98.
–79.5 dB – 18.0 dB:
Display ---dB (Min), in the range –79.5 dB
to 18.0 dB.
0 “Scale” settings are reflected in all the zones.
Front panel
Appendix
Display
Rear panel
211
Remote
Index
Contents
Connections
Playback
Settings
o Mute Level
Tips
Appendix
Audyssey®
Set the amount of attenuation when muting is on.
Full
(Default):
The sound is muted entirely.
–40 dB :
The sound is attenuated by 40 dB down.
–20 dB :
The sound is attenuated by 20 dB down.
Set Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey
Dynamic Volume® and Audyssey LFC™. These can be selected after
Audyssey® Setup has been performed.
For additional information on Audyssey technology, please see
“Explanation of terms” (v p. 347).
0 “MultEQ® XT32”, “Dynamic EQ”, “Reference Level Offset”, “Dynamic Volume”,
“Audyssey LFC™”, “Containment Amount” and “Audyssey DSX®” settings are
stored for each input source.
0 When the sound mode is in the “Direct” or “Pure Direct” mode, “MultEQ® XT32”,
“Dynamic EQ” and “Dynamic Volume” settings cannot be configured.
0 This cannot be set when the input mode is set to “7.1CH IN”.
Front panel
Display
Rear panel
212
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Dynamic EQ
o MultEQ® XT32
Solves the problem of deteriorating sound quality as volume is
decreased by taking into account human perception and room
acoustics.
Works with MultEQ® XT32.
MultEQ®
XT32 compensates for both time and frequency
characteristics of the listening area based on Audyssey® Setup
measurement results. Selection is done from three types of
compensation curves. We recommend the “Reference” setting.
Reference
(Default):
Selects the default calibrated setting with
a slight roll off at high frequencies, which
is optimized for movies.
L/R Bypass:
Selects the reference setting, but
bypasses MultEQ® XT32 on the front left
and right speakers.
Flat:
Selects the calibrated setting which is
optimized for small rooms where your
listening position is closer to the
speakers.
Off :
Do not use “MultEQ® XT32”.
On
(Default):
Use Dynamic EQ.
Off:
Do not use Dynamic EQ.
0 When the menu “Dynamic EQ” setting is “On”, it is not possible to do “Tone”
adjustment. (v p. 158)
0 This can be set by pressing DYNAMIC EQ on the main unit.
0 When using headphones, “MultEQ® XT32” is automatically set to “Off”.
Front panel
Appendix
Display
Rear panel
213
Remote
Index
Contents
Connections
Playback
Settings
o Reference Level Offset
Solves the problem of large variations in volume level between TV,
movies and other content (between quiet passages and loud
passages, etc.) by automatically adjusting to the user’s preferred
volume setting.
Audyssey Dynamic
is referenced to the standard film mix level. It
makes adjustments to maintain the reference response and surround
envelopment when the volume is turned down from 0 dB. However,
film reference level is not always used in music or other non-film
content. Dynamic EQ Reference Level Offset provides three offsets
from the film level reference (5 dB, 10 dB, and 15 dB) that can be
selected when the mix level of the content is not within the standard.
Recommended setting levels for content are shown below.
5 dB :
10 dB :
15 dB :
Optimized for content such as movies.
Select this setting for content that has a
very wide dynamic range, such as
classical music.
Select this setting for jazz or other music
that has a wider dynamic range. This
setting should also be selected for TV
content as that is usually mixed at 10 dB
below film reference.
Select this setting for pop/rock music or
other program material that is mixed at
very high listening levels and has a
compressed dynamic range.
Heavy:
Most adjustment to softest and loudest
sounds.
Medium:
Medium adjustment to loudest and
softest sound.
Light:
Least adjustment to loudest and softest
sounds.
Off
(Default):
Do not use Dynamic Volume.
0 If “Dynamic Volume” is set to “Yes” in “Audyssey® Setup”, the setting is
automatically changed to “Medium”. (v p. 238)
0 This can be set by pressing DYNAMIC VOLUME on the main unit.
0 Setting is enabled when “Dynamic EQ” is “On”. (v p. 213)
Front panel
Display
Appendix
o Dynamic Volume
EQ®
0 dB (Film Reference)
(Default):
Tips
Rear panel
214
Remote
Index
Contents
Connections
Playback
Settings
o Audyssey LFC™
Tips
Appendix
o Audyssey DSX®
Adjusts the low frequency band to prevent bass and vibration from
being conveyed to neighboring rooms.
On:
Use “Audyssey LFC™”.
Off
(Default):
Do not use “Audyssey LFC™”.
Provides more immersive surround sound by adding the new
channels.
o Containment Amount
Adjusts the amount of low frequency containment. Use higher settings
if you have close neighbors.
1 – 7 (Default : 4)
0 This can be set when “Audyssey LFC™” in the menu is set to “On”.
Wide:
Turn on Audyssey DSX® processing for
front wide channel expansion.
Height:
Turn on Audyssey DSX® processing for
front height channel expansion.
Wides/Heights:
Turns on Audyssey DSX® processing for
front wide and front height channel
expansion.
Off
(Default):
Do not set “Audyssey DSX®”.
0 “Audyssey DSX®” can be set when you are using front height speakers or front
wide speakers.
0 “Audyssey DSX®” is only valid when using a center speaker.
0 When 2-channel signals are being played back, “Audyssey DSX®” cannot be
used.
0 “Audyssey DSX®” cannot be configured if the HD Audio source being played
includes Front height and Front wide channels. In this case, the respective
channels are played back using the input signals.
0 This can be set by pressing A-DSX on the main unit.
Front panel
Display
Rear panel
215
Remote
Index
Contents
Connections
Playback
Settings
o Stage Width
Tips
Appendix
Graphic EQ
Adjust sound stage width when using front wide speakers.
Uses the graphic equalizer to adjust the tone of each speaker.
–10 – +10 (Default : 0)
o Stage Height
0 Speakers for which “Graphic EQ” can be set differ according to the sound mode.
0 This can be set when the “MultEQ® XT32” setting is “Off”. (v p. 213)
0 This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
0 If you are using headphones, you can set the equalizer for headphones.
(v p. 217)
0 This cannot be set when the input mode is set to “7.1CH IN”.
Adjust sound stage height when using front height speakers.
–10 – +10 (Default : 0)
o Graphic EQ
Set whether to use the graphic equalizer or not.
Front panel
Display
Rear panel
216
On:
Use the graphic equalizer.
Off
(Default):
Do not use the graphic equalizer.
Remote
Index
Contents
Connections
Playback
Settings
o When using headphones
Tips
Appendix
o Adjust EQ
n Headphone EQ
Adjust tonal balance for each frequency band.
Set whether to use the graphic equalizer for headphones or not.
On:
Use the graphic equalizer for
headphones.
Off
(Default):
Do not use the graphic equalizer for
headphones.
1. Select the speaker.
2. Select the adjustment frequency band.
63 Hz / 125 Hz / 250 Hz / 500 Hz / 1 kHz / 2 kHz / 4 kHz / 8 kHz /
16 kHz
3. Adjust the level.
–20.0 dB – +6.0 dB (Default : 0.0 dB)
o Speaker Selection
0 Front Dolby, Surround Dolby and Back Dolby speakers can only be set when
63 Hz/125 Hz/250 Hz/500 Hz/1 kHz.
Select whether to adjust tones for individual speakers or for all
speakers.
All:
Adjust all speaker tones together.
Left/Right
(Default):
Adjust the left and right speaker tones
together.
Each:
Adjust the tone for each speaker.
Front panel
Display
Rear panel
217
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Curve Copy
Copy the Flat correction curve created in the Audyssey® Setup.
0 “Curve Copy” is displayed after Audyssey® Setup has been performed.
0 “Curve Copy” cannot be used when using headphones.
o Set Defaults
The “Graphic EQ” settings are returned to the default settings.
Front panel
Display
Rear panel
218
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Video
Make video-related settings.
o Picture Mode
Picture Adjust
Select the desired picture mode according to the video content and
your viewing environment.
Picture quality can be adjusted.
0 Can be set when the “Video Conversion” setting is “On”. (v p. 228)
0 Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source.
(v p. 234)
0 “Contrast”, “Brightness”, “Saturation”, “Noise Reduction” and “Enhancer” can be
set when “Picture Mode” is set to “Custom”. (v p. 160)
0 “Picture Adjust” settings are stored for each input source.
0 “Picture Adjust” cannot be set when 4K signals are input.
Front panel
Display
Rear panel
219
Standard:
The standard mode suited for most living
room viewing environments.
Movie:
A mode suited for watching movies in a
dark room such as a theater room.
Vivid:
A mode that makes graphic images for
games, etc. brighter and more vivid.
Streaming:
A mode suited for low bit rate video
sources.
ISF Day:
A mode suited for watching movies in a
bright room during the day.
ISF Night:
A mode suited for watching movies in a
dark room at night.
Custom:
Adjusts the picture quality manually.
Off:
No picture quality adjustment is done with
this unit.
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Contrast
Adjust picture contrast.
0 The two special adjustment modes, ISF Day and ISF Night, should be used by
a certified technician to adjust the color calibration to match the installation
conditions.
We recommend that the settings and adjustments be carried out by an ISFcertified technician.
0 These settings can also be configured using “Picture Mode” in the option
menu. (v p. 160)
0 The default settings are as follows.
0 For “Online Music” and “iPod/USB” input sources: Streaming
0 For input sources other than “Online Music” and “iPod/USB”: Off
-50 – +50 (Default : 0)
o Brightness
Adjust picture brightness.
-50 – +50 (Default : 0)
o Saturation
Adjust picture chroma level (color saturation).
-50 – +50 (Default : 0)
Front panel
Display
Rear panel
220
Remote
Index
Appendix
Contents
Connections
Playback
Settings
o Noise Reduction
Tips
Appendix
HDMI Setup
Reduce overall video noise.
Make settings for HDMI video/audio output.
Low / Medium / High / Off (Default : Off)
NOTE
0 When “HDMI Control” and “HDMI Pass Through” is set to “On”, it consumes more
standby power. (“HDMI Control” (v p. 223), “HDMI Pass
Through” (v p. 224)) If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
o Enhancer
Emphasize picture sharpness.
0 – +12 (Default : 0)
o Auto Lip Sync
Make automatic compensation for timing shift in audio and video
output.
Front panel
Display
Rear panel
221
On
(Default):
Correct automatically.
Off:
Do not correct automatically.
Remote
Index
Contents
Connections
Playback
Settings
o HDMI Audio Out
Tips
Appendix
o Video Output
Select HDMI audio output device.
Select the HDMI monitor connector to be used.
AVR
(Default):
Play back through speakers connected to
the unit.
TV:
Play back through TV connected to the
unit.
0 When the HDMI control function is activated, priority is given to the TV audio
setting. (v p. 177)
0 When the power of this unit is on and “HDMI Audio Out” is set to “TV”, audio is
output as 2-channel from the HDMI OUT connector.
Auto(Dual)
(Default):
The presence of a TV connected to the
HDMI MONITOR 1 or HDMI MONITOR 2
connector is detected automatically, and
that TV connection is used.
Monitor 1:
A TV connected to the HDMI MONITOR
1 connector is always used.
Monitor 2:
A TV connected to the HDMI MONITOR
2 connector is always used.
0 If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are
connected and “Resolution” is set to “Auto”, the signals are output with a
resolution that is compatible with both TVs. (v p. 229)
When the “Resolution” setting in the menu is not set to “Auto”, set the
resolution in “Video” - “HDMI Monitor 1” and “HDMI Monitor 2” to one that is
compatible with both TVs. (v p. 289)
0 You can check which resolutions are compatible with your TV in “HDMI
Monitor 1” and “HDMI Monitor 2”. (v p. 289)
0 This can be set by pressing HDMI OUT on the main unit.
Front panel
Display
Rear panel
222
Remote
Index
Contents
Connections
Playback
Settings
o HDMI Control
Tips
Appendix
o ARC
You can link operations with devices connected to HDMI and
compatible with HDMI Control.
On the TV connected to the HDMI MONITOR 1 connector, set whether
to receive sound from the TV via HDMI.
On:
Use HDMI control function.
On:
Use ARC function.
Do not use HDMI control function.
Off
(Default):
Do not use ARC function.
Off
(Default):
0 If using the HDMI control function, connect a TV compatible with HDMI control
to the HDMI MONITOR 1 connector.
0 Please consult the operating instructions for each connected device to check
the settings.
0 Refer to “HDMI control function” for more information about the HDMI control
function. (v p. 177)
0 You can adjust the volume of this unit using the TV remote control.
0 If using this function, use a TV compatible with ARC (Audio Return Channel)
and enable the HDMI control function of the TV.
0 When “HDMI Control” is set to “On”, the “ARC” settings automatically switch
“On”. (v p. 223)
NOTE
NOTE
0 If the “ARC” settings have been changed, always reset the power to
connected devices after the change.
0 If the “HDMI Control” settings have been changed, always reset the power to
connected devices after the change.
Front panel
Display
Rear panel
223
Remote
Index
Contents
Connections
Playback
Settings
o HDMI Pass Through
Tips
Appendix
o Pass Through Source
Selects how this unit will transmit HDMI signals to the HDMI output in
standby power mode.
On
(Default):
Transmits the selected HDMI input
through the AV receiver’s HDMI output
when this unit is in standby power mode.
Off:
No HDMI signals are transmitted through
this unit’s HDMI output in standby power
mode.
Sets the HDMI connector that inputs HDMI signals when in standby.
Last:
The most recently used input source will
go into standby mode.
CBL/SAT / DVD /
Blu-ray / Game /
AUX1 / AUX2 /
Media Player / CDz
(Default : CBL/SAT):
Pass through the selected input source.
z“Pass Through Source” can be set when any of the HDMI
connectors is assigned to “CD” for the input source in the “Input
Assign” setting. (v p. 233)
0 “Pass Through Source” can be set when “HDMI Control” is set to “On” or
“HDMI Pass Through” is set to “On”. (“HDMI Control” (v p. 223), “HDMI
Pass Through” (v p. 224))
Front panel
Display
Rear panel
224
Remote
Index
Contents
Connections
Playback
Settings
o TV Audio Switching
Tips
Appendix
o Power Off Control
Sets automatic switching to the “TV Audio” input when a TV connected
via HDMI sends an appropriate CEC control command to the AVR.
On
(Default):
Select the “TV Audio” input automatically
when receiving a command from the TV.
Off:
Do not select the “TV Audio” input
automatically when receiving a command
from the TV.
Links the power standby of this unit to external devices.
0 “TV Audio Switching” can be set when “HDMI Control” is set to “On”.
(v p. 223)
All
(Default):
If power to a connected TV is turned off
independently of the input source, power
to this unit is automatically set to standby.
Video:
With an input source being selected that
is assigned either “HDMI”, “COMP” or
“VIDEO”, when you turn the power of the
TV off, power to this unit is automatically
set to standby. (v p. 234)
Off:
This unit does not link with power to a TV.
0 “Power Off Control” can be set when “HDMI Control” is set to “On”.
(v p. 223)
Front panel
Display
Rear panel
225
Remote
Index
Contents
Connections
Playback
Settings
o Power Saving
Tips
Appendix
o Smart Menu
If “TV Speaker” is set as the audio output setting of your TV, this unit is
automatically set to standby mode to reduce power consumption.
This function is activated in the following cases.
0 When “TV Audio” is selected as the input source of this unit
0 When playing content from a device connected by HDMI
On:
Use Power Saving function.
Off
(Default):
Do not use Power Saving function.
This function can be used to configure the settings of this unit, select
an input source and set HD Radio and Internet Radio stations using
the TV remote control.
On:
Use Smart Menu function.
Off:
Do not use Smart Menu function.
0 “Smart Menu” can be set when “HDMI Control” is set to “On”. (v p. 223)
NOTE
0 If the “Smart Menu” settings have been changed, always reset the power to
connected devices after the change.
0 The Smart Menu function may not work properly depending on the
specifications of your TV. In this case, set “Smart Menu” to “Off”.
0 “Power Saving” can be set when “HDMI Control” is set to “On”. (v p. 223)
Front panel
Display
Rear panel
226
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Video Mode
Output Settings
Configure the video processing method to match the type of video
content.
Makes settings for video output.
0 Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source.
(v p. 234)
0 “Resolution”, “Progressive Mode” and “Aspect Ratio” can be set when “i/p Scaler”
is set to anything other than “Off”. (“Resolution” (v p. 229), “Progressive
Mode” (v p. 230), “Aspect Ratio” (v p. 230))
0 “Output Settings” cannot be set when 4K signals are input.
0 “Video Conversion”, “i/p Scaler”, “Resolution”, “Progressive Mode” and “Aspect
Ratio” settings are stored for each input source. (“Video Conversion” (v p. 228),
“i/p Scaler” (v p. 228), “Resolution” (v p. 229), “Progressive
Mode” (v p. 230), “Aspect Ratio” (v p. 230))
Auto
(Default):
Process video automatically based on
the HDMI content information.
Game:
Always process video for game content.
Minimize the video delay when the video
is delayed compared to the button
operations on the controller of the game
console.
Movie:
Perform image processing that is suitable
for contents other than games.
0 If “Video Mode” is set to “Auto”, the mode is switched according to the input
contents.
Front panel
Display
Rear panel
227
Remote
Index
Contents
Connections
Playback
Settings
o Video Conversion
Appendix
o i/p Scaler
The input video signal is converted automatically in conjunction with
the connected TV. (v p. 331)
On
(Default):
The input video signal is converted.
Off:
The input video signal is not converted.
Front panel
Tips
Display
Rear panel
Set the video input signal to be subjected to i/p scaler processing.
i/p Scaler will convert the resolution of the input video signal to the
value set in “Resolution”. (v p. 229)
n When the input source is set other than to “iPod/
USB” and “Online Music”
228
Analog
(Default):
Use i/p (interlace-to-progressive) scaler
function for analog video signals.
Analog & HDMI:
Use i/p scaler function for analog and
HDMI video signal.
HDMI:
Use i/p scaler function for HDMI video
signals.
Off:
Do not use i/p scaler function.
Remote
Index
Contents
Connections
Playback
Settings
Use i/p scaler function.
Off:
Do not use i/p scaler function.
Appendix
o Resolution
n When the input source is set to “iPod/USB” and
“Online Music”
On
(Default):
Tips
Set the output resolution. You can set “Resolution” separately for
HDMI output of the analog video input and HDMI input.
0 “Analog & HDMI” can be set for input sources for which an HDMI input
connector is assigned.
0 Which items can be set depend on the input source assigned to each input
connector.
0 This function is not effective when the input signal is “x.v.Color”, 3D, sYCC601
color, Adobe RGB color, Adobe YCC601 color or computer resolutions.
Auto
(Default):
The resolution supported by the TV
connected to the HDMI MONITOR OUT
connector is detected automatically and
the appropriate output resolution is set.
480p/576p / 1080i /
720p / 1080p /
1080p:24Hz /
4K / 4K(60/50) :
Set the output resolution.
0 When “i/p Scaler” is set to “Analog & HDMI”, the resolution of both the analog
video input signal and HDMI input signal can be set. (v p. 228)
0 When set to “1080p:24Hz”, you can enjoy film-like pictures for film sources (in
24 Hz). For video sources and mixed sources, we recommend setting the
resolution to “1080p”.
0 It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output at a
resolution of 1080p/50Hz.
Front panel
Display
Rear panel
229
Remote
Index
Contents
Connections
Playback
Settings
o Progressive Mode
Tips
Appendix
o Aspect Ratio
Set an appropriate progressive conversion mode for the source video
signal.
Auto
(Default):
The video signal is automatically
detected and the appropriate mode is
set.
Video:
Select mode suitable for video playback.
Video and Film:
Select mode suitable for video and 30frame film material playback.
Set the aspect ratio for the video signals output to the HDMI.
16:9
(Default):
Output at 16:9 aspect ratio.
4:3 :
Output at 4:3 aspect ratio with black bars
on the sides of a 16:9 TV screen. (except
for 480p/576p output)
0 This item can be set when “i/p Scaler” is set to anything other than “Off”.
(v p. 228)
0 This item can be set when “i/p Scaler” is set to anything other than “Off”.
(v p. 228)
Front panel
Display
Rear panel
230
Remote
Index
Contents
Connections
Playback
Settings
Component Video Out
Tips
Appendix
On Screen Display
Set the zone to which the component video output connector is assigned.
Select the on-screen display user interface preferences.
MAIN ZONE
(Default):
Assigns the component video output
connector to MAIN ZONE.
o Volume
ZONE2:
Assigns the component video output
connector to ZONE2.
Sets where to display the volume level.
Bottom
(Default):
Top:
Off:
Display at the bottom.
Display at the top.
Turn display off.
0 When the master volume display is hard to see when superimposed text
(closed captioning) or movie subtitles are present, set to “Top”.
o Info
Displays status of operation temporarily when the input source is
switched.
On
(Default):
Off:
Front panel
Display
Rear panel
231
Remote
Turn display on.
Turn display off.
Index
Contents
Connections
Playback
Settings
o Now Playing
Tips
Appendix
TV Format
Sets the display time for the playback display when the input source is
“Online Music”, “iPod/USB”, “Bluetooth” or “HD Radio”.
Set the video signal format to be output for the TV you are using.
Always On
(Default):
Show display continuously.
o Format
Auto Off:
Show display for 30 seconds after
operation.
NTSC
(Default):
Select NTSC output.
PAL:
Select PAL output.
0 “Format” can also be set by the following procedure. However, the menu
screen is not displayed. Following the display content to make the setting.
1. Press and hold the main unit’s STATUS and ZONE SELECT at the same
time for at least 3 seconds.
“Video Format <NTSC>” appears on the display.
2. Use the main unit’s o or p and set the video signal format.
3. Press the main unit’s ENTER to complete the setting.
NOTE
0 When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Front panel
Display
Rear panel
232
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Inputs
Perform settings related to input source playback.
You do not have to change the settings to use the unit. Make settings when needed.
Input Assign
0 By default, each item is set as follows.
By making connections as indicated by the input sources printed on the
audio/video input connectors of this unit, you can just press one of the
input source select buttons to easily play back audio or video from a
connected device.
Please change the assignment of the HDMI input connector, digital audio
input connector, analog audio input connector, component video input
connector and video input connector when connecting an input source
that differs from that printed to the audio/video input connectors of this
unit.
Input source
Inputs/Input Assign
Set Defaults
CBL/SAT
DVD
Blu-ray
Game
Media Player
TV Audio
AUX1
AUX2
CD
HDMI
DIGITAL
ANALOG
COMP
VIDEO
1
2
3
4
5
Front
6
-
COAX1
COAX2
OPT1
OPT2
1
2
3
4
Front
5
1
2
3
-
1
2
3
Front
-
Rear panel
ANALOG
COMP
CBL/SAT
1
COAX1
1
1
VIDEO
1
DVD
2
COAX2
2
2
2
Blu-ray
3
–
3
3
–
Game
4
–
4
–
3
Media Player
5
–
–
–
–
TV Audio
–
OPT1
–
–
–
AUX1
Front
–
Front
–
Front
AUX2
6
–
–
–
–
CD
–
OPT2
5
–
–
When using the digital audio output on a TV/satellite box:
To play the video signal assigned to “HDMI” combined with the audio
signal assigned at “Input Assign” - “DIGITAL”, you will also need to
select “Digital” in the “Input Mode”. (v p. 237)
.
Display
DIGITAL
n TV set top box/satellite users please note
Changes HDMI input assignments
Front panel
Input connector
HDMI
233
Remote
Index
Contents
Connections
Playback
Settings
o HDMI
Tips
Appendix
o ANALOG
Set this to change the HDMI input connectors assigned to the input
sources.
Set this to change the analog audio input connectors assigned to the
input sources.
1/2/3/4/5/6/7/
Front:
Assign an HDMI input connector to the
selected input source.
1 / 2 / 3 / 4 / 5 / Front:
–:
Do not assign an HDMI input connector
to the selected input source.
–:
o COMP (Component video)
0 When “HDMI Control” or “ARC” is set to “On” in the menu, “HDMI” cannot be
assigned to “TV Audio”. (v p. 223)
Set this to change the component video input connectors assigned to
the input sources.
o DIGITAL
1 / 2 / 3:
Set this to change the digital audio input connectors assigned to the
input sources.
COAX1 (Coaxial) /
COAX2 /
OPT1 (Optical) / OPT2:
Assign a digital audio input connector to
the selected input source.
–:
Do not assign a digital audio input
connector to the selected input source.
Front panel
Display
Rear panel
Assign a analog audio input connector to
the selected input source.
Do not assign a analog audio input
connector to the selected input source.
–:
234
Remote
Assign the component video input
connector to the selected input source.
Do not assign a component video input
connector to the selected input source.
Index
Contents
Connections
Playback
Settings
o VIDEO
–:
Appendix
Source Rename
Set this to change the composite video input connectors assigned to
the input sources.
1 / 2 / 3 / Front:
Tips
Change the display name for input source.
This is convenient when the name of your device and the input source
name of this unit are different. You can change the name to suit your
needs. When the renaming is completed, the name is displayed on this
unit’s display and on the menu screen.
Assign the video input connector to the
selected input source.
Do not assign a video input connector to
the selected input source.
CBL/SAT / DVD / Blu-ray /
Game / AUX1 / AUX2 /
Change the display name for input source.
Media Player / CD / TV
Audio / Phono:
o Set Defaults
The “Input Assign” settings are returned to the default settings.
Set Defaults:
The Source Rename settings are returned
to the default settings.
0 Up to 12 characters can be input. For character input, see “Using the keyboard
screen” (v p. 203).
Front panel
Display
Rear panel
235
Remote
Index
Contents
Connections
Playback
Settings
Hide Sources
Tips
Appendix
Source Level
Remove from the display input sources that are not used.
Show
(Default):
Use this source.
Hide:
Do not use this source.
This function corrects the playback level of the selected input source’s
audio input.
Make this setting if there are differences in the input volume levels
between the different sources.
o Source Level
n When the input source is set to “iPod/USB”,
“Online Music”, “Bluetooth” or “HD Radio”
-12 dB – +12 dB (Default : 0 dB)
o Analog Inputs / Digital Inputs
n When the input source is set other than to “iPod/
USB”, “Online Music”, “Bluetooth” or “HD Radio”
-12dB – +12dB (Default : 0dB)
0 The analog input level can be adjusted independently for input sources for which
“ANALOG” is assigned at “Input Assign”. (v p. 233)
0 The digital input level can be adjusted independently for input sources for which
“DIGITAL” is assigned at “Input Assign”. (v p. 233)
0 “Source Level” settings are stored for each input source.
Front panel
Display
Rear panel
236
Remote
Index
Contents
Connections
Playback
Settings
Appendix
o Decode Mode
Input Select
Set the audio decode mode for input source.
It is normally recommended to set the audio input mode to “Auto”. But
we recommend changing it to “PCM” or “DTS” if the start of the source
is clipped or noise occurs.
Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input
source.
0 “Input Select” settings are stored for each input source.
o Input Mode
Set the audio input modes for the different input sources.
It is normally recommended to set the audio input mode to “Auto”.
Auto
(Default):
Automatically detect input signal and
perform playback.
HDMI:
Play only signals from HDMI input.
Digital:
Play only signals from digital audio input.
Analog:
Play only signals from analog audio input.
7.1CH IN:
Only signals input from the 7.1CH IN
connector will be played back.
Display
Rear panel
Auto
(Default):
Detect type of digital audio input signal
and decode and play automatically.
PCM:
Decode and play only PCM input signals.
DTS:
Decode and play only DTS input signals.
0 This item can be set for input sources for which “HDMI” or “DIGITAL” is
assigned at “Input Assign”. (v p. 233)
Upgrade (Auro-3D)
Auro-3D:
The input signal is decoded using an
Auro-3D decoder.
0 This item can always be set on models supporting Auro-3D.
0 The sound modes you can select are Auro-3D or Auro-2D Surround when the
“Decode Mode” setting is “Auro-3D”.
0 When digital signals are properly input, the ~ indicator lights on the display.
If the ~ indicator does not light, check “Input Assign” and the connections.
(v p. 233)
0 If “HDMI Control” is set to “On” and a TV compatible with the ARC is
connected via the HDMI MONITOR 1 connectors, the input mode whose input
source is “TV Audio” is fixed to ARC.
0 The sound mode cannot be set if the input mode is set to “7.1CH IN”.
Front panel
Tips
237
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Speakers
The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called
“Audyssey® Setup”.
You do not have to perform Audyssey® Setup when you have already performed “Speaker Calibration” in “Setup Assistant”.
To set up the speakers manually, use “Manual Setup” on the menu. (v p. 249)
Audyssey® Setup
To perform measurement, place the Sound calibration microphone in
multiple locations all around the listening area. For best results, we
recommend you measure in six or more positions, as shown in the
illustration (up to eight positions).
When measuring the second and subsequent positions, install the Sound
calibration microphone within 2 ft (60 cm) of the first measurement position
(main listening position).
FL SW C
(
0 If you perform the Audyssey® Setup, the Audyssey MultEQ® XT32, Audyssey
Dynamic EQ®, Audyssey Dynamic Volume® and Audyssey LFC™ functions are
enabled. (v p. 212)
FL Front speaker (L)
FR Front speaker (R)
C Center speaker
SW Subwoofer
SL Surround speaker (L)
SR Surround speaker (R)
:Measuring positions)
Listening position
SR
.
SL
FR
Front panel
Display
Rear panel
238
Remote
Index
Contents
Connections
Playback
Settings
o About the main listening position
0 Make the room as quiet as possible. Background noise can disrupt the room
measurements. Close windows and turn off the power on electronic devices
(radios, air conditioners, fluorescent lights, etc.). The measurements could be
affected by the sounds emitted by such devices.
0 During the measurement process, place cell phones outside the listening room.
Cell phone signals could disrupt the measurements.
0 Do not stand between the speakers and Sound calibration microphone or allow
obstacles in the path while the measurements are being made. Also, install the
Sound calibration microphone at least 20 inches (50 cm) away from the wall.
Failure to do so will result in inaccurate readings.
0 During the measurement process, audible test tones will come from the speakers
and subwoofer(s), but this is part of normal operation. If there is background noise
in the room, these test signals will increase in volume.
0 Operating VOLUME d f on the remote control unit or VOLUME on the main unit
during the measurements will cancel the measurements.
0 Measurement cannot be performed when headphones are connected. Unplug the
headphones before performing Audyssey® Setup.
o About Audyssey Sub EQ HT™
Audyssey Sub EQ HT™ makes the integration of dual subwoofers
seamless by first compensating for any level and delay differences
between the two subwoofers and then applying Audyssey MultEQ®
XT32 to both subwoofers together.
To run Audyssey Sub EQ HT™ you must select “Measure (2 spkrs)” in
“Channel Select”. (v p. 241).
Display
Appendix
NOTE
The main listening position is the position where listeners would
normally sit or where one would normally sit alone within the listening
environment. Before starting Audyssey® Setup, place the Sound
calibration microphone in the main listening position.
Audyssey MultEQ® XT32 uses the measurements from this position to
calculate speaker distance, level, polarity, and the optimum crossover
value for the subwoofer.
Front panel
Tips
Rear panel
239
Remote
Index
Contents
Connections
Playback
Settings
Procedure for speaker settings
(Audyssey® Setup)
1
Tips
Appendix
Attach the Sound calibration microphone to the
supplied microphone stand or own tripod and install it
at the main listening position.
When installing the Sound calibration microphone, point the tip of
the microphone toward the ceiling and adjust the height to match the
height of the ears of a listener in a seated position.
Preparation
2
Measurement
If using a subwoofer capable of the following
adjustments, set up the subwoofer as shown below.
n When using a subwoofer with a direct mode
Set the direct mode to “On” and disable the volume adjustment
and crossover frequency setting.
Calculation & Store
n When using a subwoofer without a direct mode
Make the following settings:
0 Volume : 12 o’clock position
0 Crossover frequency : Maximum/Highest Frequency
0 Low pass filter : Off
0 Standby mode : Off
Check
.
Finish
Front panel
Display
Rear panel
240
Remote
Index
Contents
Playback
Settings
4
Connect the Sound calibration microphone to the
SETUP MIC jack of this unit.
When the Sound calibration microphone is
connected, the following screen is displayed.
.
Audyssey Setup
Your AV receiver can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone and microphone stand.
Set the following items
if necessary.
5
Amp Assign
Channel Select
Dolby Speaker Setup
Tips
Select “Start”, then press ENTER.
Follow the instructions on the screen display and press
“Next” to proceed further.
Start
Front panel
Display
Rear panel
241
Appendix
Audyssey® Setup can also make the following settings.
0 Amp Assign
The signals output from the SURROUND BACK, FRONT WIDE
and HEIGHT1 speaker terminals can be switched in accordance
with your speaker environment. (“Amp Assign” (v p. 249))
0 Channel Select
If channels that are not to be used are set in advance,
measurement for the set channels is skipped, and measuring
time can be reduced. You can also change the number of
surround back speakers and subwoofer.
0 Dolby Speaker Setup
Set the distance between the Dolby Atmos Enabled speaker and
the ceiling.
This can be set when using the Front Dolby Atmos Enabled,
Surround Dolby Atmos Enabled or Back Dolby Atmos Enabled
speaker.
.
3
Connections
Remote
Index
Contents
Playback
Settings
7
When the following screen is displayed, select “Begin
Test” and then press ENTER.
Start the measurement of the first position.
Tips
Appendix
When the detected speaker is displayed, select “Next”
and then press ENTER.
Audyssey Setup
Speaker Detection
Audyssey Setup
Select “Begin Test” to start the calibration.
NOTE: You will hear a series of loud chirps starting and stopping
during the tests.
Front
Center
Subwoofer
Surround
:Yes
:Yes
:Yes
:Yes
Ear Height
Next
.
Repeat Last Test
Back
Begin Test
.
6
Connections
0 Measurement requires several minutes.
NOTE
0 If “Caution!” is displayed on TV screen:
0 Go to “Error messages” (v p. 246). Check any related items, and
perform the necessary procedures.
0 If the volume level for the subwoofer is not appropriate, an error message
is displayed. See “Subwoofer level error message and how to adjust”
(v p. 247).
Front panel
Display
Rear panel
242
Remote
Index
Contents
Playback
Settings
9
Move the Sound calibration microphone to position 2,
select “Continue”, then press ENTER.
The measurement of the second position starts.
Measurements can be made in up to eight positions.
Tips
Appendix
Repeat step 8, measuring positions 3 to 8.
0 To skip measuring the fourth and subsequent listening position, press o to
select “Complete” and press ENTER to proceed to step 11.
10
Audyssey Setup
Place the microphone ear level at the 2nd listening position,
which should be no more than 2 ft (60cm) away from the 1st
position, then select “Continue”...
Select “Continue”, then press ENTER.
Audyssey Setup
Ear Height
Back
Measurements complete.
Select Continue to analyze the data...
Continue
.
n Stopping Audyssey® Setup
Repeat Last Test
A Press BACK to display the popup screen.
B Press o to select “Yes”, then press ENTER.
Continue
.
8
Connections
Start the analysis and storage of the measurement results.
0 Analysis takes several minutes to complete.
The more speakers and measurement positions that there are,
the more time it takes to perform the analysis.
NOTE
0 When the measurement results are being saved, make sure the power is
not turned off.
Front panel
Display
Rear panel
243
Remote
Index
Contents
11
Connections
Playback
Settings
12
Perform the settings for Audyssey Dynamic EQ® and
Audyssey Dynamic Volume®.
The following screen is displayed during the analysis. Configure the
settings as preferred.
Tips
Appendix
When the analysis and storage ends, unplug the Sound
calibration microphone from the SETUP MIC jack on the
main unit and then press “Next”.
Audyssey Setup
Now Analyzing and correcting the your room data.
Please disconnect the microphone from your AV receiver.
Audyssey Setup
Audyssey Dynamic EQ maintains bass, clarity and surround
sound at low volumes letting you enjoy late-night movies
and television.
Turn on the Dynamic EQ?
Yes
No
Applying room corrections
100%
Analyzing room data
Back
Next
.
.
50%
0 Dynamic EQ corrects the frequency response in consideration of
the audio characteristics of the room and human hearing ability so
that sound can be heard even at low volume.
This is recommended when using the unit with the volume turned
down, e.g. when enjoying a movie or TV program in the middle of
the night.
0 Dynamic Volume adjusts the output volume to the optimal level
while constantly monitoring the level of the audio input to the unit.
Optimal volume control is performed automatically without any
loss in the dynamism and clarity of the sound when, for example,
the volume suddenly increases for commercials shown during
television programs.
Front panel
Display
Rear panel
244
Remote
Index
Contents
13
Connections
Playback
Settings
Tips
Select “Details” and press ENTER to verify the
measurement results.
0 Subwoofers may measure a greater reported distance than the
actual distance due to added electrical delay common in
subwoofers.
NOTE
0 Do not change the speaker connection or subwoofer volume after Audyssey®
Setup. If these are changed, run Audyssey® Setup again in order to configure the
optimum equalizer settings.
Front panel
Display
Rear panel
245
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Error messages
An error message is displayed if Audyssey® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error
message is displayed, check the relevant items and perform the necessary measures. Be sure to turn off the power before checking speaker connections.
Examples
Error details
No speakers found.
Measures
0 Sound calibration microphone is not
0 Connect the included Sound calibration microphone to the
0 Not all speakers could be detected.
0 Check the speaker connections.
detected.
Ambient noise is too high or level is too 0 There is too much noise in the room.
low
0 Speaker or subwoofer sound is too low.
SETUP MIC jack of this unit.
0 Either turn off any device generating noise or move it away.
0 Perform again when the surroundings are quieter.
0 Check the speaker installation and the direction in which the
speakers are facing.
0 Adjust the subwoofer’s volume.
Front R : None
0 The displayed speaker could not be
Front R : Phase
0 The displayed speaker is connected with the
detected.
polarity reversed.
0 Check the connections of the displayed speaker.
0 Check the polarity of the displayed speaker.
0 For some speakers, this error message may be displayed
even if the speaker is properly connected. If you are sure the
connection is correct, press p to select “Ignore”, then press
ENTER.
Front panel
Display
Rear panel
246
Remote
Index
Contents
Connections
Playback
Settings
o Subwoofer level error message and how to
adjust
1
2
The optimal level of each subwoofer channel for Audyssey® Setup
measurement is 75 dB.
During subwoofer level measurement, an error message is displayed
when one level of subwoofers is outside the 72 – 78 dB range.
When using a subwoofer with built-in amplifier (active type), adjust the
subwoofer volume so that the subwoofer level is within the 72 to 78 dB
range.
3
Tips
Select “SW Level Matching” and then press ENTER.
Adjust the volume control on your subwoofer so that
the measured level is within the 72 to 78 dB range.
When the measured level is within the 72 to 78 dB
range, select “Next” and then press ENTER.
0 If you use two subwoofers, the second subwoofer’s adjustment
will be started. Repeat the operation from step 2, 3.
G Error message H
Audyssey Setup
Your Subwoofer 1’s level is too high.
If your subwoofer has a volume control on it,
select “SW Level Matching” to interactively adjust the level of
your subwoofer.
If your subwoofer does not have a volume control,
or if you do not want to use a subwoofer, select “Skip”.
Skip
SW Level Matching
.
Back
Front panel
Display
Rear panel
Appendix
247
Remote
Index
Contents
Connections
Playback
Settings
Tips
Retrieving Audyssey® Setup settings
If you set “Restore...” to “Restore”, you can return to Audyssey® Setup
measurement result (value calculated at the start by MultEQ® XT32) even
when you have changed each setting manually.
Audyssey Setup
Your AV receiver can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone and microphone stand.
Set the following items
if necessary.
Amp Assign
Channel Select
Dolby Speaker Setup
Check Results
Restore...
.
Start
Front panel
Display
Rear panel
248
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Manual Setup
Tips
Appendix
Amp Assign
Select the power amplifier usage method to match your speaker system.
Perform when setting the speakers manually or when changing settings
made in Audyssey® Setup.
0 If you change the speaker settings after performing Audyssey® Setup,
you will no longer be able to select Audyssey MultEQ® XT32, Audyssey
Dynamic EQ® or Audyssey Dynamic Volume®. (v p. 212)
0 “Manual Setup” can be used without changing the settings. Please set if
necessary.
o Assign Mode
Select how to use the power amp.
You need to configure the detailed settings for the speaker
configuration in accordance with the selected mode. Select Assign
Mode configure the corresponding detailed settings.
0 Setting to use the 9-channel power
11.1ch:
Front panel
Display
Rear panel
249
Remote
amplifier in this unit and an external
power amplifier connected to PRE OUT
to play back up to 11.1-channels.
0 You can connect speakers for up to 13.1channels for MAIN ZONE.
Speakers to output audio are automatically
switched for playing back up to 11.1channels in accordance with the input
signal and sound mode.
Index
Contents
Connections
Playback
Settings
0 Settings to assign all power amplifier
9.1ch:
Front panel
this unit for ZONE3 to 2-channels
0 You can connect speakers for up to 9.1-
7.1ch + ZONE3:
5.1ch + ZONE2/3:
this unit for ZONE2 to 2-channels.
0 You can connect speakers for up to 9.1channels for MAIN ZONE.
Speakers to output audio are automatically
switched for playing back up to 7.1channels in accordance with the input
signal and sound mode.
Display
Rear panel
Appendix
0 Setting to assign the power amplifiers in
within this unit to MAIN ZONE to play
back up to 9.1-channels.
0 You can connect speakers for up to 11.1channels for MAIN ZONE.
Speakers to output audio are automatically
switched for playing back up to 9.1channels in accordance with the input
signal and sound mode.
0 Setting to assign the power amplifiers in
7.1ch + ZONE2
(Default):
Tips
channels for MAIN ZONE.
Speakers to output audio are automatically
switched for playing back up to 7.1channels in accordance with the input
signal and sound mode.
0 Setting to assign the power amplifiers
within this unit for ZONE2 and ZONE3
each to two different channel.
0 Setting to assign the power amplifiers in
7.1ch + ZONE2/3-MONO:
250
Remote
this unit for ZONE2 and ZONE3 each to
a different channel.
0 You can connect speakers for up to 9.1channels for MAIN ZONE.
Speakers to output audio are automatically
switched for playing back up to 7.1channels in accordance with the input
signal and sound mode.
Index
Contents
Connections
Playback
Settings
0 Setting to assign the power amplifiers in
7.1ch (Bi-Amp):
Front panel
9.1ch/2ch Front:
this unit for front speaker bi-amp
connection to 2-channels.
0 Setting to assign the power amplifiers in
this unit for ZONE2 to 2-channels.
Display
Rear panel
Appendix
0 Setting to assign the power amplifiers in
this unit for front speaker bi-amp
connection to 2-channels.
0 You can connect speakers for up to 9.1channels for MAIN ZONE.
Speakers to output audio are automatically
switched for playing back up to 7.1channels in accordance with the input
signal and sound mode.
0 Setting to assign the power amplifiers in
5.1ch (Bi-Amp) + ZONE2:
Tips
this unit for connecting 2-channel
playback speakers to 2-channels.
0 You can switch the front speakers when
using 2-channel playback in direct mode
or stereo mode, or when using multichannel surround playback.
When setting speakers for 2-channel
playback, also perform the “2ch Playback”
setting. (v p. 267)
0 Setting to assign the power amplifiers in
this unit for the bi-amp connection of the
2-channel playback speakers to 4channels.
0 You can switch the front speakers when
using 2-channel playback in direct mode
7.1ch/2ch Front (Bi-Amp):
or stereo mode, or when using multichannel surround playback.
When setting speakers for 2-channel
playback, also perform the “2ch Playback”
setting. (v p. 267)
251
Remote
Index
Contents
Connections
Playback
Settings
Front panel
within this unit for connecting the second
set of front speakers.
0 You can switch between the desired
combination of front speakers A and
front speakers B.
Switch the front speaker using the “Front
Speaker” setting. (v p. 267)
Display
Rear panel
Appendix
o Speakers for ZONE2 / Speakers for ZONE3 /
Speakers for ZONE2/ZONE3 / Speakers for BiAmp/ Speakers for 2ch/ Speakers for Front B
0 Setting to assign the power amplifiers
7.1ch + Front B:
Tips
When “Assign Mode” is set to “7.1ch + ZONE2”, “7.1ch + ZONE3”,
“7.1ch + ZONE2/3-MONO”, “7.1ch (Bi-Amp)”, “9.1ch/2ch Front” or
“7.1ch + Front B” in the menu, select the speaker terminal from which
to output the channels to which the internal amplifier is assigned.
(v p. 249)
252
FRONT WIDE/HEIGHT2
(Default):
The assigned channels are output from
the FRONT WIDE/HEIGHT2 speaker
terminals. The front wide channel cannot
be used. Up to one set of height, ceiling,
and Dolby Atmos Enabled channels can
be used.
HEIGHT1:
The assigned channels are output from
the HEIGHT1 speaker terminals. The
height, ceiling, and Dolby Atmos Enabled
channels cannot be used.
SURROUND BACK:
The assigned channels are output from
the SURROUND BACK speaker
terminals. The surround back channel
cannot be used. Up to one set of height,
ceiling, and Dolby Atmos Enabled
channels can be used.
Remote
Index
Contents
Connections
Playback
Settings
o Floor
Appendix
o Height
n Layout
n Height Sp
Select the floor speakers location.
5ch & SB & FW:
Tips
Select the number of the height speakers and ceiling speakers used in
MAIN ZONE.
This layout combines a surround back or
front wide speaker with the basic 5channel layout.
5ch & SB
(Default):
This layout combines a surround back
speaker with the basic 5-channel layout.
5ch & FW:
This layout combines a front wide
speaker with the basic 5-channel layout.
5ch:
This is a basic 5-channel layout that uses
front speakers, center speakers and
surround speakers.
None:
Uses no height and ceiling speakers.
2ch
(Default):
Uses a set of (two) height speakers or
ceiling speakers.
4ch:
Uses two sets of (four) height speakers or
ceiling speakers.
Upgrade (Auro-3D)
5ch:
Uses five height speakers z
z If “5ch” is selected, connect the Top Surround speaker to the SUBWOOFER 2
terminal.
n Dolby Sp
Select the number of the Dolby Atmos Enabled speakers used in MAIN
ZONE.
Front panel
Display
Rear panel
253
None
(Default):
Uses no Dolby Atmos Enabled speakers.
2ch:
Uses a set of (two) Dolby Atmos Enabled
speakers.
4ch:
Uses two sets of (four) Dolby Atmos
Enabled speakers.
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
n Layout
Select the height, ceiling, or Dolby Atmos Enabled speaker location.
The layouts that can be selected differ depending on the combinations of “Assign Mode” and “Floor” - “Layout” in the menu. (“Assign
Mode” (v p. 249), “Floor” - “Layout” (v p. 253))
Height Speakers
None
Dolby Speakers
None
2ch
None
4ch
None
None
2ch
Settings
NOTE
z1
Layout
Front Height (Default)
Top Front
Top Middle
Top Rear
Rear Height
Front Height & Top Middle
Front Height & Top Rear
Front Height & Rear Height
Top Front & Top Rear
Top Front & Rear Height
Top Middle & Rear Height
Front Dolby
Surround Dolby
Back Dolbyz2
AUDIO OUT connectors
HEIGHT1
HEIGHT2
Front Height
Top Front
Top Middle
Top Rear
Rear Height
Front Height
Top Middle
Front Height
Top Rear
Front Height
Rear Height
Top Front
Top Rear
Top Front
Rear Height
Top Middle
Rear Height
Front Dolby
Surround Dolby
Back Dolby
-
z1 This can be selected when “Assign Mode” is set to “11.1ch” or “9.1ch” in the menu.
z2 This can be selected when “Assign Mode” is set to “11.1ch” or “9.1ch” and “Floor” - “Layout” is set to “5ch & SB & FW” or “5ch & SB” in the menu.
Front panel
Display
Rear panel
254
Remote
Index
Contents
Connections
Playback
Settings
NOTE
Height Speakers
Dolby Speakers
2ch
2ch
z1
None
4ch
z1
Settings
Layout
Front Dolby & Top Rear
Front Dolby & Rear Height
Front Height & Surr. Dolby
Front Height & Back Dolbyz3
Top Front & Surround Dolby
Top Front & Back Dolbyz3
Front Dolby & Surround Dolby
Front Dolby & Back Dolbyz3
Tips
Appendix
AUDIO OUT connectors
HEIGHT1
HEIGHT2
Front Dolby
Top Rear
Front Dolby
Rear Height
Front Height
Surround Dolby
Front Height
Back Dolby
Top Front
Surround Dolby
Top Front
Back Dolby
Front Dolby
Surround Dolby
Front Dolby
Back Dolby
z1 This can be selected when “Assign Mode” is set to “11.1ch” or “9.1ch” in the menu.
z2 This can be selected when “Assign Mode” is set to “11.1ch” or “9.1ch” and “Floor” - “Layout” is set to “5ch & SB & FW” or “5ch & SB” in the menu.
z3 This can be selected when “Assign Mode” is set to “11.1ch” and “Floor” - “Layout” is set to “5ch & SB & FW” or “5ch & SB” in the menu.
Front panel
Display
Rear panel
255
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Upgrade (Auro-3D)
Settings
NOTE
Height Speakers
Dolby Speakers
4ch
None
z1
5ch
None
z4
Layout
Front Height & Surr. Height
Front Height & Rear Heightz5
Front Height & Surr. Height
Front Height & Rear Heightz5
HEIGHT1
Front Height
Front Height
Front Height
Front Height
AUDIO OUT connectors
HEIGHT2
SUBWOOFER2
Surround Height
Rear Height
Surround Height
Top Surround
Rear Height
Top Surround
z1 This can be selected when “Assign Mode” is set to “11.1ch” or “9.1ch” in the menu.
z4 This can be selected when “Assign Mode” is set to “11.1ch” in the menu.
z5 For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup
in place of Surround Height speakers.
Front panel
Display
Rear panel
256
Remote
Index
Contents
Connections
Playback
Settings
o Pre-out
Tips
Appendix
Speaker Config.
When “Assign Mode” is set to “11.1ch”, selects the PRE OUT connect
the external power amplifier used in MAIN ZONE.
The PRE OUT connectors that can be selected differ depending on the
combination of “Floor” - “Layout” and “Height” - “Layout” settings
configured in the menu.
Select whether or not speakers are present, playback capacity for low
bass frequencies and speaker size.
0 When speakers for which you assigned Height1 in “Amp Assign” are set to “None”,
“None” is automatically set for Height2.
o View Terminal Config.
o Front
This shows how to connect the speaker terminals and PRE OUT
connectors for your “Amp Assign” setting on the menu screen.
Set the front speaker size.
Large
(Default):
Use a large speaker that can adequately
play back very low bass frequencies.
Small:
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
0 When “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.
0 When “Front” is set to “Small”, you cannot set speakers other than “Front” to
“Large”.
Front panel
Display
Rear panel
257
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Surround
o Center
Set the presence and size of the surround speakers.
Set the presence and size of the center speaker.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when a center speaker is not
connected.
None:
Select when the surround speakers are
not connected.
o Subwoofer
0 When “Surround” is set to “None”, “Surr. Back”, “Front Wide”, “Surround
Dolby” and “Back Dolby” are automatically set to “None”.
Set the presence of a subwoofer.
2 spkrs:
Use two subwoofers.
1 spkr
(Default):
Use only one subwoofer.
None:
Select when a subwoofer is not
connected.
0 When “Subwoofer” is set to “None” and you set “Front” to “Small”, “Subwoofer”
is automatically set to “1 spkr”.
Front panel
Display
Rear panel
258
Remote
Index
Contents
Connections
Playback
Settings
o Surr. Back
Tips
Appendix
o Front Wide
Set the presence, size and number of surround back speakers.
Set the presence and size of the front wide speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the surround back speakers
are not connected.
None:
Select when the front wide speakers are
not connected.
2 spkrs
(Default):
Use two surround back speakers.
1 spkr:
Use only one surround back speaker.
Connect to the L terminal to SURROUND
BACK when this setting is selected.
o Front Height
Set the presence and size of the front height speakers.
0 When “Surr. Back” is set to “None” or “1 spkr”, “Back Dolby” is automatically
set to “None”.
Front panel
Display
Rear panel
259
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the front height speakers are
not connected.
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Top Middle
o Front Dolby
Set the presence and size of the top middle speakers.
Set the presence and size of the front Dolby speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the front Dolby speakers are
not connected.
None:
Select when the top middle speakers are
not connected.
o Top Front
o Surround Dolby
Set the presence and size of the top front speakers.
Set the presence and size of the surround Dolby speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the top front speakers are
not connected.
None:
Select when the surround Dolby
speakers are not connected.
Front panel
Display
Rear panel
260
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Back Dolby
o Top Rear
Set the presence and size of the back Dolby speakers.
Set the presence and size of the top rear speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the top rear speakers are
not connected.
None:
Select when the back Dolby speakers are
not connected.
o Rear Height
0 When speakers for which you assigned Height1 in “Amp Assign” are set to
“None”, “None” is automatically set for Height2.
Set the presence and size of the rear height speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the rear height speakers are
not connected.
Front panel
Display
Rear panel
261
Remote
Index
Contents
Connections
Playback
Settings
Upgrade (Auro-3D)
Tips
Appendix
Upgrade (Auro-3D)
o Surround Height
o Top Surround
Set the presence and size of the surround height speakers.
Set the presence and size of the top surround speaker.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the surround height
speakers are not connected.
None:
Select when the top surround speaker is
not connected.
0 When “Front Height” is set to “None”, “Surround Height” is automatically set to
“None”.
Front panel
Display
Rear panel
0 When “Surround Height” or “Rear Height” is set to “None”, “Top Surround” is
automatically set to “None”.
262
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Set the distance
Distances
0.0 ft – 60.0 ft / 0.00 m – 18.00 m
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
0 The speakers that can be selected differ depending on the “Amp Assign” and
“Speaker Config.” settings. (“Amp Assign” (v p. 249), “Speaker
Config.” (v p. 257))
0 Default settings:
Front L / Front R / F. Height L / F. Height R / F. Wide L / F. Wide R / Center /
F. Dolby L / F. Dolby R / Subwoofer 1 / Subwoofer 2: 12.0 ft (3.60 m)
Speakers other than the above: 10.0 ft (3.00 m)
0 Set the difference in the distance between the speakers to less than 20.0 ft
(6.00 m).
o Unit
Set the unit of distance.
Feet (Default)
Meters
o Step
Set the minimum variable width of the distance.
1 ft / 0.1 ft (Default: 1 ft)
0.1 m / 0.01 m
Front panel
Appendix
Display
Rear panel
263
Remote
Index
Contents
Connections
Playback
Settings
o Dolby Speaker Setup
Tips
Appendix
Levels
Set the distance between the Dolby Atmos Enabled speaker and the
ceiling.
Set the volume of the test tone to be the same at the listening position
when it is output from each speaker.
3.0 ft - 11.0 ft / 0.90 m - 3.30 m(Default : 6.0 ft / 1.80 m)
o Test Tone Start
A test tone is output from the selected speaker.
While listening to the test tone, adjust the volume output from the
selected speaker.
0 This can be set when “Front Dolby”, “Surround Dolby” or “Back Dolby” is set to
“Large” or “Small” in “Speaker Config.”.
–12.0 dB – +12.0 dB (Default : 0.0 dB)
o Set Defaults
The “Distances” settings are returned to the default settings.
0 The set “Levels” are reflected in all sound modes.
0 If you wish to adjust the channel level for each input source, carry out the
settings in “Channel Level Adjust”. (v p. 157)
0 When headphones are connected to the PHONES connector on this unit, you
cannot set “Levels”.
o Set Defaults
The “Levels” settings are returned to the default settings.
Front panel
Display
Rear panel
264
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Set the crossover frequency
Crossovers
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
200 Hz / 250 Hz (Default : 80 Hz)
Set in accordance with the lower limit frequency of the base frequencies
that can be played back through each speaker. See the speaker manual
for information concerning speaker crossover frequency.
o Speaker Selection
0 “Crossovers” can be set when the “Subwoofer Mode” setting is “LFE+Main”, or
when you have a speaker that is set to “Small”. (v p. 266)
0 The default crossover frequency is “80 Hz”, which will work best with the
widest variety of speakers. We recommend setting to a higher frequency that
the crossover frequency when small speakers are used. For example, set to
“250 Hz” when the frequency range of the speakers is 250 Hz – 20 kHz.
0 Sound below the crossover frequency is cut off from the output of the
speakers set in “Small”. This cut off bass frequency is output from the
subwoofer or front speakers.
0 The speakers that can be set when “Individual” is selected differ depending on
to the “Subwoofer Mode” setting. (v p. 266)
Selects how to set the crossover frequency.
All
(Default):
Sets the same crossover frequency for all
speakers.
Individual:
Selects the crossover points for each
speaker individually.
0 When “LFE” is selected, speakers set to “Small” at “Speaker Config.” can be
set. If the speakers are set to “Large”, “Full Band” is displayed and the
setting cannot be made. (v p. 257)
0 When “LFE+Main” is selected, speakers can be set regardless of the
“Speaker Config.” setting. (v p. 257)
Front panel
Display
Rear panel
265
Remote
Index
Contents
Connections
Playback
Settings
Tips
o LPF for LFE
Bass
Set LFE signal playback range. Set this when you want to change the
playback frequency (low pass filter point) of the subwoofer.
Set subwoofer and LFE signal range playback.
o Subwoofer Mode
80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
200 Hz / 250 Hz (Default : 120 Hz)
Select low range signals to be reproduced by subwoofer.
LFE
(Default):
The low range signal of the channel set to
“Small” speaker size is added to the LFE
signal output from the subwoofer.
LFE+Main:
The low range signal of all channels is
added to the LFE signal output from the
subwoofer.
0 “Subwoofer Mode” can be set when “Speaker Config.” - “Subwoofer” is set to
other than “No”. (v p. 258)
0 Play music or a movie source and select the mode offering the strongest bass.
0 If “Speaker Config.” - “Front” and “Center” are set to “Large”, and “Subwoofer
Mode” is set to “LFE”, no sound may be output from the subwoofers,
depending on the input signal or selected sound mode. (v p. 258) Select
“LFE+Main” if you want the bass signals to always be produced from the
subwoofer.
Front panel
Appendix
Display
Rear panel
266
Remote
Index
Contents
Connections
Playback
Settings
Front Speaker
Tips
Appendix
2ch Playback
Set the front speaker A/B to use for every sound mode.
A
(Default):
Front speaker A is used.
B:
Front speaker B is used.
A+B :
Both front speakers A and B are used.
Select the method for setting the speakers used in the 2-channel direct
and stereo playback modes.
o Setting
Select the method for setting the speakers used in the 2-channel direct
and stereo playback modes.
0 This can be set when “Assign Mode” is set to “7.1ch + Front B”. (v p. 252)
0 This can be set by pressing SPKR A/B on the main unit.
Auto
(Default):
The settings in “Speakers” are applied.
(v p. 238)
Manual:
Set the speakers for 2-channel playback.
Make the following settings:
o Front
Set the size of the front speakers for 2-channel playback.
Large
(Default):
Use a large speaker that can adequately
play back very low bass frequencies.
Small:
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
0 When “Speaker Config.”-“Subwoofer” in the menu is set to “None”, “Large” is
automatically set. (v p. 258)
Front panel
Display
Rear panel
267
Remote
Index
Contents
Connections
Playback
Settings
o Subwoofer
Tips
Appendix
o SW Mode
Set the presence of a subwoofer.
Select low range signals to be reproduced by subwoofer.
Yes
(Default):
Use a subwoofer.
No:
Select when a subwoofer is not
connected.
0 When “Speaker Config.”-“Subwoofer” in the menu is set to “None”, No is
automatically set. (v p. 258) If the “Front” setting is “Small”, the setting is
automatically “Yes”.
LFE
(Default):
When “2ch Playback”-“Front” is set to
“Large”, only LFE signals are output from
the subwoofer. Also, when “2ch
Playback” - “Front” is set to “Small”, the
front channel low range signals are
added to the LFE signals and output from
the subwoofer.
LFE+Main:
The front channel low range signal is
added to the LFE signal output from the
subwoofer.
0 This can be set when “2ch Playback”-“Subwoofer” is set to “Yes”.
Front panel
Display
Rear panel
268
Remote
Index
Contents
Connections
Playback
Settings
o Crossover
Tips
o Level FL/Level FR
Set the maximum frequency of the bass signal output from each
channel to the subwoofer.
Adjust the level of each channel.
-12.0dB – +12.0dB (Default : 0.0dB)
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
200 Hz / 250 Hz (Default : 80 Hz)
0 This can be set when “2ch Playback”-“Subwoofer” is set to “Yes”.
0 When “2ch Playback”-“Front” is set to “Large” and “SW Mode” is set to LFE,
“Full Band” is displayed and this cannot be set.
o Distance FL/Distance FR
Set distance from main listening position to speaker.
0.0ft – 60.0ft (Default : 12.0ft) /
0.00m – 18.00m (Default : 3.60m)
0 Set the difference in the distance between the speakers to less than 20.0 ft
(6.00 m).
Front panel
Display
Rear panel
269
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Network
To use this unit by connecting it to a home network (LAN), you must configure network settings.
If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN).
When assigning an IP address to each device manually, you need to assign an IP address to this unit using the “IP Address” settings, and enter
information about your home network (LAN) such as the gateway address and subnet mask, etc.
Connection
Information
Display network information.
Choose whether to connect the home network to a wireless LAN or a
wired LAN.
When connecting to the network using wired LAN, select “Wired
(Ethernet)” after connecting a LAN cable,
When connecting to the network using wireless LAN, select “Wireless (WiFi)” and configure the “Wi-Fi Setup”. (v p. 271)
Friendly Name / Connection / SSID / DHCP / IP Address / MAC
Address
0 MAC Address is required to create a vTuner account.
o Wi-Fi
You can stop the Wi-Fi function when connecting this unit to the
network using Wired LAN.
Front panel
Display
Rear panel
270
Enabled
(Default):
The Wi-Fi function is used.
Disabled:
The Wi-Fi function is stopped.
Remote
Index
Contents
Connections
Playback
Settings
o Connect Using
Wireless (Wi-Fi):
Appendix
Wi-Fi Setup
Select the method for connecting to the home network (LAN).
Wired (Ethernet):
Tips
Connect to a wireless LAN (Wi-Fi) router.
The router can be connected in the following ways. Select the connection
method to suit your home environment.
Use a LAN cable to connect to a network.
Use the wireless LAN (Wi-Fi) function to
connect to a network.
o Scan Networks
Select the network you wish to connect to from the list of possible
networks shown on the TV screen.
0 This can be set when “Wi-Fi” is set to “Enabled”. (v p. 270)
1. Select the network you wish to connect to from the list of wireless
networks.
Select “Rescan” if the network cannot be found.
2. Enter your password and select “OK”.
o Use iOS Device
Use your iOS device (iPhone/iPod/iPad) to connect to the network. By
connecting your iOS device to this unit, the unit can be automatically
connected to the same network as your device.
This unit can be connected to your iOS device in two ways, using a
USB cable and using Wi-Fi.
Front panel
Display
Rear panel
271
Remote
Index
Contents
Connections
Playback
Settings
Tips
o WPS Router
n When connecting using Wi-Fi
Use a WPS-compatible router to connect.
There are two ways to connect, using the push button method or the
PIN code method. Select the connection method to match your router.
1. Select “Wireless connection” on the TV screen.
2. Check that your iOS device is connected to the wireless LAN
(Wi-Fi) router and select “Marantz SR7010” from “SET UP NEW
AIRPLAY SPEAKER...” at the bottom of the Wi-Fi configuration
screen of your iOS device.
3. Tap “Next” on the screen of the iOS device.
n When connecting using the push button method
1. Select “Push Button” on the TV screen.
2. Switch to the WPS mode by pressing the WPS button of the
router you wish to connect to.
0 The time for pressing the button varies depending on the
router.
3. Select “Connect” on the TV screen within 2 minutes.
0 The iOS device firmware version needs to support iOS 7 or later.
n When using a USB cable
1. Select “USB cable” on the TV screen.
2. Check that your iOS device is connected to the wireless LAN
(Wi-Fi) and connect it to the USB port on the front panel using a
USB cable.
3. Select “Connect” on the TV screen.
4. Tap “Allow” when the connection message appears on the
screen of your iOS device.
n When connecting using the PIN code method
1. Select “PIN” on the TV screen.
2. Register the PIN code of the unit in the router.
0 The iOS device firmware version needs to support iOS 5 or later.
Front panel
Display
Appendix
Rear panel
272
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Manual
Enter the name (SSID) and password of the network you wish to
connect to.
0 The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or
tablet that supports wireless LAN connection.
0 When using a device that has a firmware version of iOS 7 or later, “When
connecting using Wi-Fi” (v p. 272) in “Use iOS Device”.
1. Set the following items.
SSID:
Input the name of the wireless network
(SSID).
Security:
Select the encryption method according
to the encryption setting of the access
point you are using.
Password:
Input the password.
Default Key:
Select the Default Key.
When connecting to a “WEP” encrypted
network, “Default Key” menu is
displayed.
1. Press and hold the DIMMER and ZONE SELECT buttons on the main unit for at
least 3 seconds when the power of the unit is on.
2. Connect the wireless LAN of the PC or tablet used to “Marantz SR7010” when
the message “Connect your Wi-Fi device to Wi-Fi network called “Marantz
SR7010”” appears in the display.
3. Start up the browser and enter “192.168.1.16” in the URL.
4. Use the browser to enter the settings, select “Connect” and then exit the
settings.
2. Select “Connect” at the end of the setting.
Front panel
Display
Rear panel
273
Remote
Index
Contents
Connections
Playback
Settings
Tips
o DHCP
Settings
Selects how to connect to the network.
Configure the proxy settings and IP address.
0 If you are using a broadband router (DHCP function), the information
required for network connection such as the IP address will be
automatically configured since the DHCP function is set to “On” in the
default settings of this unit.
0 Set up the IP Address, Subnet Mask, Default Gateway and DNS server
information only when assigning a fixed IP address or when connecting
to a network without DHCP function.
0 Configure the proxy settings when using a proxy server to connect to
the Internet.
On
(Default):
Configure the network settings
automatically from your router.
Off:
Configure the network settings manually.
o IP Address
Set the IP address within the ranges shown below.
0 The Network Audio function cannot be used if other IP addresses
are set.
CLASS A:10.0.0.1 - 10.255.255.254
CLASS B:172.16.0.1 - 172.31.255.254
CLASS C:192.168.0.1 - 192.168.255.254
Network/Settings
DHCP
Off
-IP Address
192.168.001.002
-Subnet Mask
255.255.255.000
-Default Gateway
192.168.001.001
-Primary DNS
192.168.001.001
-Secondary DNS
000.000.000.000
Proxy
On(Address)
-Address
000.000.000.000
-Port
00000
Save
Cancel
Configures the network settings manually
o Subnet Mask
When connecting an xDSL modem or connector adapter directly to
this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input 255.255.255.0.
.
Front panel
Appendix
Display
Rear panel
274
Remote
Index
Contents
Connections
Playback
Settings
o Default Gateway
Tips
o Port
When connected to a gateway (router), input its IP address.
Enter port number.
o Primary DNS, Secondary DNS
0 If you cannot connect to the Internet, recheck the connections and settings.
(v p. 97)
0 If you do not understand about Internet connection, contact your ISP (Internet
Service Provider) or the store from which you purchased your computer.
If there is only one DNS address indicated in the documentation
supplied by your provider, input it at “Primary DNS”. If two or more
DNS are provided by your provider, enter both “Primary DNS” and
“Secondary DNS”.
o Proxy
Make this setting when connecting to the Internet via a proxy server.
Make the proxy settings only when you connect to the Internet via a
proxy server that is on your internal network or provided by your
provider, etc.
On(Address):
Select when inputting by address.
On(Name):
Select when inputting by domain name.
Off
(Default):
Disables the proxy server.
Front panel
Appendix
Display
Rear panel
275
Remote
Index
Contents
Connections
Playback
Settings
Network Control
Tips
Appendix
Friendly Name
Enables network communication in standby power mode.
Off In Standby:
Suspend network function during standby.
Always On
(Default):
Network is on during standby. Main unit
operable with a network compatible
controller.
The Friendly Name is the name of this unit displayed on the network. You
can change the Friendly Name according to your preferences.
o Friendly Name
Selects Friendly Name from the list.
When you select “Other”, you can change the Friendly Name
according to your preferences.
Home Theater / Living Room / Family Room / Guest Room /
Kitchen / Dining Room / Master Bedroom / Bedroom / Den /
Office / Other
0 When using the web control function or Marantz 2015 AVR Remote, use with the
“Network Control” setting set to “Always On”.
NOTE
0 When “Network Control” is set to “Always On”, the unit consumes more standby
power.
0 Up to 63 characters can be input.
For character input, see “Using the keyboard screen” (v p. 203).
0 The default Friendly Name on first use is “Marantz SR7010”.
o Set Defaults
Restores Friendly Name, which you had changed, to the default
setting.
Front panel
Display
Rear panel
276
Remote
Index
Contents
Connections
Playback
Settings
Checks whether this unit has access to the Internet (WAN).
Used to check the network connection.
OK
o Physical Connection
Error:
Checks the physical LAN port connection.
OK
Failed to connect to the Internet. Check
the Internet connection environment or
router settings.
The LAN cable is not connected. Check
the connection.
0 When connected using a wireless LAN, “Connection
be displayed.
Wireless (Wi-Fi)” will
o Router Access
Checks the connection from this unit to the router.
OK
Error:
Front panel
Appendix
o Internet Access
Diagnostics
Error:
Tips
Failed to communicate with the router.
Check the router settings.
Display
Rear panel
277
Remote
Index
Contents
Connections
Playback
Settings
Tips
Maintenance Mode
Use when receiving maintenance from a Marantz service engineer or
custom installer. Ordinarily, this mode isn’t suitable for use by the end
user, only by a trained service technician or custom installation
professional.
NOTE
0 Only use this function if so instructed by a Marantz serviceperson or installer.
Front panel
Display
Rear panel
278
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
General
Make various other settings.
Language
ECO
Set the language for display the menu on the TV screen.
Configure the settings of the ECO Mode and auto standby mode.
English / Français / Español (Default : English)
o ECO Mode
This mode can reduce the power consumption when the power of the
unit is on.
0 “Language” can also be set up by the following operation. However, the menu
screen is not displayed. Watch the display while configuring the settings.
1. Press and hold the main unit’s STATUS and ZONE SELECT at the same time
for at least 3 seconds.
“Video Format <NTSC>” appears on the display.
2. Press the main unit’s i.
“GUI Language ENGLISH” appears on the display.
3. Use the main unit’s o or p and set the language.
4. Press the main unit’s ENTER to complete the setting.
On:
Reduce the power consumption.
Auto:
The power consumption is automatically
reduced to match the volume.
Off
(Default):
Do not reduce the power consumption.
0 When you want to output audio at a high volume level, it is recommended to
set “ECO Mode” to “Off”.
0 Eco mode can also be switched by pressing ECO G on the remote control
unit.
Front panel
Display
Rear panel
279
Remote
Index
Contents
Connections
Playback
Settings
o Power On Default
Appendix
o On Screen Display
Set the mode to ECO when the power is on.
Last
(Default):
The ECO Mode will be set to the previous
setting before the power was switched
off.
On:
When power is turned on, the mode will
always be switched to the ECO Mode in
“On”.
Auto:
When power is turned on, the mode will
always be switched to the ECO Mode in
“Auto”.
Off:
When power is turned on, the mode will
always be switched to the ECO Mode in
“Off”.
Front panel
Tips
Display
Rear panel
Display the power consumption of this unit using a meter on the TV
screen.
280
Always On:
Always display the meter on the TV
screen.
Auto
(Default):
Display the meter when changing the
mode or volume.
Off:
Do not display the meter.
Remote
Index
Contents
Connections
Playback
Settings
o Auto Standby
Tips
Appendix
n ZONE2 / ZONE3
When there are no operations for a certain period of time as set here,
the power is automatically shut off even if there is audio or video input.
Set so the unit power automatically switches to standby.
n MAIN ZONE
Sets the time for switching to auto standby when there are no audio or
video signals input into this unit.
Before the unit enters standby mode, “Auto Standby” is displayed on
the unit display and the menu screen.
8 hours:
Switches ZONE2/ZONE3 the standby
state after about 8 hours.
4 hours:
Switches ZONE2/ZONE3 to the standby
state after about 4 hours.
60 min:
The unit goes into standby after 60 minutes.
2 hours:
30 min:
The unit goes into standby after 30 minutes.
Switches ZONE2/ZONE3 to the standby
state after about 2 hours.
15 min:
The unit goes into standby after 15 minutes.
Off
(Default):
Does not automatically switch ZONE2/
ZONE3 to the standby state.
Off
(Default):
The unit does not go into standby
automatically.
Front panel
Display
Rear panel
281
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Lch Level
ZONE2 Setup/ZONE3 Setup
Adjust the left channel output level.
Makes settings for audio playback with ZONE2 and ZONE3.
-12 dB – +12 dB (Default : 0 dB)
o Rch Level
0 Values set for “Volume Limit” and “Power On Volume” are displayed according to
the setting specified for the volume “Scale” (v p. 211).
Adjust the right channel output level.
o Bass
-12 dB – +12 dB (Default : 0 dB)
Adjust bass.
o Channel
-10dB – +10dB (Default : 0dB)
Set whether to playback in stereo or monaural.
o Treble
Adjust treble.
-10dB – +10dB (Default : 0dB)
Stereo
(Default):
Stereo playback.
Mono:
Monaural playback.
o High Pass Filter
Make settings for cutting the low range to reduce distortion in the bass.
On:
The low range is attenuated.
Off
(Default):
The low range is not attenuated.
Front panel
Display
Rear panel
282
Remote
Index
Appendix
Contents
Connections
Playback
Settings
o HDMI Audio (ZONE2 only)
Tips
Appendix
o Volume Limit
Selects the audio signal format for playing an HDMI source in ZONE2.
Make a setting for maximum volume.
Through
(Default):
The HDMI audio signal is passed through
this unit to the device in ZONE2.
60 (-20 dB) / 70 (-10 dB) / 80 (0 dB)
(Default : 70 (-10 dB))
The HDMI audio signal input into this unit
is converted to a PCM signal that can be
output from the ZONE2 PRE OUT
connectors or speaker terminals.
Off:
PCM:
Do not set a maximum volume.
0 This can be set when “Volume Level” is set to “Variable”. (v p. 283)
o Volume Level
o Power On Volume
Set the volume output level.
Define the volume setting that is active when the power is turned on.
Variable
(Default):
Volume can be adjusted.
1 - 98
(–79.5 dB – 18.0 dB) :
Volume is fixed at the desired level. The
volume cannot be adjusting using the
remote control unit.
Last
(Default):
Use the memorized setting from the last
session.
Mute:
Always mute when power is turned on.
1 - 98
(–79.5 dB – 18.0 dB) :
The volume is adjusted to the set level.
0 This can be set when “Volume Level” is set to “Variable”. (v p. 283)
Front panel
Display
Rear panel
283
Remote
Index
Contents
Connections
Playback
Settings
o Mute Level
Tips
Appendix
Zone Rename
Set the amount of attenuation when muting is on.
Change the display title of each zone to one you prefer.
Full
(Default):
The sound is muted entirely.
MAIN ZONE / ZONE2 / ZONE3
–40 dB :
The sound is attenuated by 40 dB down.
Set Defaults:
–20 dB :
The sound is attenuated by 20 dB down.
The default setting is restored for the edited
zone name.
0 Up to 10 characters can be input.
For character input, see “Using the keyboard screen” (v p. 203).
Smart Select Names
Change the smart select name that appears on the TV screen to one you
prefer.
Smart Select 1 / Smart Select 2 / Smart Select 3 / Smart Select 4
Set Defaults:
The default setting is restored for the edited
smart select name.
0 Up to 16 characters can be input.
For character input, see “Using the keyboard screen” (v p. 203).
Front panel
Display
Rear panel
284
Remote
Index
Contents
Connections
Playback
Settings
Trigger Out 1/Trigger Out 2
Tips
Appendix
Front Display
Select the conditions for activating trigger out.
For details about how to connect the DC OUT jacks, see “DC OUT
jacks” (v p. 100).
Makes settings related to the display on this unit.
o Dimmer
n When setting for zone (MAIN ZONE / ZONE2 /
ZONE3)
Adjust the display brightness of this unit.
Trigger out is activated through linkage to the power of the zone set to
“On”.
n When setting for input source
Activate trigger out when the input source set to “On” is selected.
Bright
(Default):
Normal display brightness.
Dim:
Reduced display brightness.
Dark:
Very low display brightness.
Off:
Turns the display off.
n When setting for HDMI monitor
0 You can also adjust the display by pressing DIMMER on the main unit.
Activate trigger out when the HDMI monitor set to “On” is selected.
On:
Activate trigger on this mode.
– – –:
Do not activate trigger on this mode.
Front panel
Display
Rear panel
285
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Channel Indicators
Sets whether to use the input signal display or output signal display for
the channel indication on the display.
Input:
Uses the input signal display for the
channel indication on the display.
Output
(Default):
Uses the output signal display for the
channel indication on the display.
Front panel
Display
Rear panel
286
Remote
Index
Appendix
Contents
Connections
Playback
Settings
When the latest firmware is available, a notification message is
displayed on the TV screen at power on.
The notification message is displayed for about 40 seconds when the
power is turned on.
Checks for the latest firmware information about updates and upgrades,
updates the firmware, and sets up the notification message display for
updates and upgrades.
o Update
Update
Updates the firmware of this unit.
Execute the update process. When the
update starts, the menu screen is shut
down. During the update, the progress is
shown on the display.
Display
On
(Default):
Display update message.
Off:
Do not display update message.
Upgrade
0 This unit automatically retries updating if updating fails. If the update still fails,
either one of the following messages will appear on the screen. If the display
reads as shown below, check the settings and network environment, then
update again.
On
(Default):
Display upgrade message.
Off:
Do not display upgrade message.
Description
Updating fail
Updating failed.
Login failed
Failure to log into server.
Server is busy
Server is busy. Wait a while then try again.
Connect fail
Failure in connecting to server.
Download fail
Downloading of the firmware has failed.
Front panel
Appendix
o Notifications
Firmware
Update:
Tips
Display
Rear panel
287
Remote
Index
Contents
Connections
Playback
Settings
o Add New Feature
Notes concerning use of “Update” and “Add New Feature”
Upgrade Package:
Display the items to be upgraded.
Upgrade Status:
Display a list of the additional functions
provided by the upgrade.
requirements and settings for an Internet connection. (v p. 97)
0 Do not turn off the power until updating or upgrading is completed.
0 Approximately 1 hour is required for the updating/upgrading procedure
to be completed.
0 Once updating/upgrade starts, normal operations on this unit cannot
Execute the upgrade process.
When the upgrade starts, the menu
screen is shut down. During the upgrade,
the amount of upgrade time which has
elapsed is displayed.
be performed until updating/upgrading is completed. Furthermore,
there may be cases where backup data is reset for the parameters,
etc., set on this unit.
0 If the update or upgrade fails, press and hold the X on the main unit for
more than 5 seconds, or remove and re-insert the power cord. “Update
retry” appears on the display and update restarts from the point at
which update failed. If the error continues despite this, check the
network environment.
0 See the Marantz website for details about upgrades.
0 When the procedure is complete, “Registered” is displayed in this menu and
upgrades can be carried out. If the procedure has not been carried out, “Not
Registered” is displayed.
The ID number shown on this screen is needed when carrying out the
procedure.
The ID number can also be displayed by pressing and holding the main unit’s
o and SETUP for at least 3 seconds.
0 If the upgrade is not successful, an error message identical to those in
“Firmware” - “Update” will appear on the display. Check the settings and
network environment and then perform the upgrade again.
Front panel
Appendix
0 In order to use these functions, you must have the correct system
Display new features that can be downloaded to this unit and perform
an upgrade.
Upgrade Start:
Tips
Display
Rear panel
0 Information regarding the “Update” function and “Add New Feature” will be
announced on the Marantz web site each time related plans are defined.
288
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Video
Information
Show information about this unit settings, input signals, etc.
Show the HDMI input/output signals and HDMI monitor information for
MAIN ZONE.
o Audio
HDMI Signal Info.
Resolution / Color Space / Pixel Depth
Show the audio information for MAIN ZONE.
Sound Mode:
The currently set sound mode.
Input Signal:
The input signal type.
Format:
The number of input signal channels
(presence of front, surround, LFE).
Sample Rate:
The input signal’s sampling frequency.
Offset:
The dialogue normalization correction
value.
Flag:
This is displayed when inputting signals
including a surround back channel.
“MATRIX” is displayed with DTS-ES
Matrix input signals, “DISCRETE” with
DTS-ES Discrete signals.
HDMI Monitor 1 / HDMI Monitor 2
Interface / Resolutions
o ZONE
Show information about current settings.
MAIN ZONE:
This item shows information about
settings for MAIN ZONE. The information
displayed differs according to the input
source.
ZONE2:
This item shows information about
settings for ZONE2.
ZONE3:
This item shows information about
settings for ZONE3.
o Firmware
Front panel
Display
Rear panel
289
Version:
Displays information for the current
firmware.
DTS Version:
Displays the current DTS version.
Remote
Index
Contents
Connections
Playback
Settings
o Notifications
Tips
Appendix
Usage Data
Displays and sets notifications.
Also, sets whether or not to display the notification when the power is
turned on.
To help us improve our products and customer service, Marantz collects
anonymous information about how you use your AV receiver (such as
frequently used input sources and sound modes and speaker settings).
Marantz will never provide any information we collect to third parties.
Notification Alerts
On
(Default):
Notification messages are displayed.
Yes:
Provide information on the operating status
of this unit.
Off:
Notification messages are not displayed.
No:
Do not provide information on the operating
status of this unit.
0 Press INFO on the remote control unit to display current source name, volume,
sound mode name, and other information at the bottom of the screen.
SOURCE
SOUND
SIGNAL
AUDYSSEY
Blu-ray
Dolby TrueHD
Dolby TrueHD
MultEQ XT32 : Reference
Dynamic EQ : On
Dynamic Volume : Medium
INPUT SIGNAL
FHL
LFE
FWL
FL
SL
SBL
EXT
C
SB
FR
SR
SBR
ACTIVE SPEAKERS
FHR
FWR
SW
FL
SL
SBL
C
FR
SR
SBR
.
50.0
Front panel
Display
Rear panel
290
Remote
Index
Contents
Connections
Playback
Settings
Tips
Setup Lock
Protect settings from inadvertent changes.
o Lock
On:
Turn protection on.
Off
(Default):
Turn protection off.
0 When cancelling the setting, set “Lock” to “Off”.
NOTE
0 When “Lock” is set to “On”, no setting items are displayed except for “Setup
Lock”.
Front panel
Display
Rear panel
291
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Operating external devices with the remote control unit
When preset codes are registered in the included remote control unit, it
can then be used to operate any devices you have, such as DVD players
or TVs made by different manufacturers.
SET
AVR
Input source
select buttons
CH/PAGE d
INFO
OPTION
ENTER
SMART
SELECT
1–4
.
0–9
Front panel
Display
Rear panel
292
Remote
Index
Contents
Connections
Playback
Settings
Tips
n Registering DVD players
Registering preset codes
1
There are two methods for registering preset codes; the simple method for
registering preset codes of Marantz players, the method for registering the
preset numbers of other manufacturers’ devices, and the method for
experimenting with preset codes one by one for registration.
0 “Registering Marantz players” (v p. 293)
0 “Registering by entering preset numbers” (v p. 294)
Press and hold down DVD and OPTION until “OK”
indicator on the remote control display is flashing, then
release.
n Registering CD players
1
o Registering Marantz players
Use the following simple method to register the preset codes of
Marantz Blu-ray Disc players, DVD players and CD players.
Press and hold down CD and OPTION until “OK”
indicator on the remote control display is flashing, then
release.
n Registering Blu-ray Disc players
1
Press and hold down Blu-ray and OPTION until “OK”
indicator on the remote control display is flashing, then
release.
Front panel
Display
Appendix
Rear panel
293
Remote
Index
Contents
Connections
Playback
Settings
n Registering multiple players at the same time
1
Blu-ray Disc DVD player CD player
player
P
The following table shows the device groups that can be registered for
each of the input source select buttons. Check the preset number of
the device you want to register beforehand in the “Remote Control
Preset Codes” file.
http://manuals.marantz.com/SR7010/preset/SR7010PresetCodes.pdf
P
SMART SELECT 2 and
OPTION
P
P
SMART SELECT 3 and
OPTION
P
P
SMART SELECT 4 and
OPTION
P
P
Press and hold down
the buttons
Button
Device groups that can be registered
CBL/SAT group
SMART SELECT 1 and
OPTION
P
BD/DVD group
CBL/SAT group, BD/DVD group,
Audio group
CBL/SAT group
BD/DVD group
NOTE
CBL/SAT group, BD/DVD group,
Audio group
0 Depending on the model and year of manufacture of your device, some buttons
may not operate. In this case, try “Registering by entering preset numbers”
(v p. 294).
CBL/SAT group, BD/DVD group,
Audio group
Audio group
TV group
Front panel
Display
Rear panel
Appendix
o Registering by entering preset numbers
Press and hold down the SMART SELECT 1 – 4 and
OPTION until “OK” indicator on the remote control
display is flashing, then release.
Devices to be registered at the
same time
Tips
294
Remote
Index
Contents
1
2
Connections
Playback
Settings
1
Enter the preset number (4 digits) listed for the device
in the Preset Code Table using the number buttons (0 –
9) on the remote control.
2
0 Some manufacturers use more than one type of remote control code. Preset
codes to change the number and verify correct operation.
0 If the device does not operate even when the preset code is registered, use the
learning function. Remote codes for different devices can be remembered for use
by the Marantz remote control included with this device. (v p. 301)
3
4
5
NOTE
Rear panel
Switch the power on of the device for which you want
to set the preset code.
Press and hold down the input source select button
that you want to register the preset code to and SET
until “PRSET” indicator on the remote control display
is flashing, then release.
Aim the remote control at the appliance and slowly
alternate between pressing CH/PAGE d and DEVICE X
for the appliance.
The preset code is shown in the remote control display.
0 Depending on the model and year of manufacture of your device, some buttons
may not operate.
Display
Appendix
o Experimenting with preset codes one by one
for registration
Press and hold down the input source select button
that you want to register the preset code to and SET
until “PRSET” indicator on the remote control display
is flashing, then release.
Front panel
Tips
295
Stop when the appliance turns off.
Press ENTER once to lock in the code.
Remote
Index
Contents
Connections
Playback
Settings
Tips
0 Some manufacturers use more than one type of remote control code. Preset
codes to change the number and verify correct operation.
0 If the device does not operate even when the preset code is registered, use the
learning function. Remote codes for different devices can be remembered for use
by the Marantz remote control included with this device. (v p. 301)
NOTE
0 Depending on the model and year of manufacture of your device, some buttons
may not operate.
Front panel
Display
Rear panel
296
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Operating devices
Tips
Appendix
n TV group
(TV) operation
To operate an external device, press the input source button registered
with the preset code, followed by one of the buttons in the following tables.
Operation buttons
0 When operating an external device, the display on the remote control unit shows
the input source name.
0 The “TV” indicator lights when the TV is being operated.
0 To operate the menu of this unit, press AVR before operating the unit. The “AVR”
indicator lights when this unit is being operated.
Function
TV X
TV power on/off
TV INPUT
Switch TV input
TV MENU
TV menu
CH/PAGE df
Switch channels (up/down)
INFO
Information
OPTION
Sub menu, Option
uiop
Cursor operation
ENTER(Cursor)
Enter
BACK
Back
89
Skip chapter
1
Playback
67
Fast-reverse / Fast-forward
3
Pause
2
Stop
0 – 9, +10
Channel selection
0 TV X and TV INPUT buttons can be operated at any time
without pressing the TV button.
Front panel
Display
Rear panel
297
Remote
Index
Contents
Connections
Playback
Settings
n DVD group
(DVD player / DVD recorder) operation
Operation buttons
Tips
Appendix
n CD group
(CD player / CD recorder) operation
Function
Operation buttons
Function
DEVICE X
Power on/off
DEVICE X
Power on/off
DEVICE MENU
(Popup) Menu
DEVICE MENU
(Popup) Menu
INFO
Information
INFO
Information
OPTION
Top menu
uiop
Cursor operation
uiop
Cursor operation
ENTER
Enter
ENTER
Enter
2
Stop
BACK
Back
3
Pause
SETUP
Setup
1
Playback
2
Stop
89
Skip chapter
3
Pause
67
Fast-reverse / Fast-forward
0 – 9, +10
Select title, chapter or channel
selection
1
Playback
89
Skip chapter
67
Fast-reverse / Fast-forward
0 – 9, +10
Select title, chapter or channel
selection
0 Depending on the device, the DEVICE X button only performs the power-on operation.
Front panel
Display
Rear panel
298
Remote
Index
Contents
Connections
Playback
Settings
Appendix
n BD group
(Blu-ray Disc player) operation
n CBL/SAT group
(Set top box for satellite (SAT)/cable TV (CBL)/
Media player/IP TV) operation
Operation buttons
Tips
Operation buttons
Function
Function
DEVICE X
Power on/off
DEVICE X
Power on/off
DEVICE MENU
(Popup) Menu
DEVICE MENU
Menu
INFO
Information
CH/PAGE df
Switch channels (up/down)
OPTION
Top menu
INFO
Information
uiop
Cursor operation
uiop
Cursor operation
ENTER
Enter
ENTER
Enter
BACK
Back
BACK
Back
SETUP
Setup
SETUP
Setup
HOME
Home menu
HOME
Home menu
2
Stop
2
Stop
3
Pause
3
Pause
1
Playback
1
Playback
89
Skip chapter
89
Skip chapter
67
Fast-reverse / Fast-forward
67
Fast-reverse / Fast-forward
0 – 9, +10
Channel selection
0 – 9, +10
Select title, chapter or channel
selection
0 Depending on the device, the DEVICE X button only performs the power-on operation.
Front panel
Display
Rear panel
299
Remote
Index
Contents
Connections
Playback
Settings
Checking registered preset codes
1
2
Tips
Initializing registered preset codes
1
Press and hold an input source select button for which
you want to check the preset code and the SET button
until the display on the remote control unit shows
“PRSET”.
Press and hold down AVR and OPTION until “OK”
indicator on the remote control display is flashing, then
release.
Press INFO.
The set code is shown for 3 seconds in the remote control display.
Front panel
Display
Rear panel
Appendix
300
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Operating learning function
If the device does not operate even when the preset code is registered,
use the learning function. Remote codes for different devices can be
remembered for use by the Marantz remote control included with this
device.
SET
.
Input source
select buttons
Front panel
Display
Rear panel
301
Remote
Index
Contents
Connections
Playback
Settings
Remembering remote control codes
from other devices
1
2
3
6
7
Place the Marantz remote control and remote control
from the other device approximately 5 cm apart, with
the remote control signal transmission sections facing
each other.
5
Press and hold SET until the LEARN indicator blinks.
Repeat steps 4 and 5 to learn other buttons for the
same input source.
When programming of the remote control unit is
completed, press SET.
0 There are some remote control units that cannot be programmed, or even if they
can be programmed, they may not operate correctly. If this happens, use the
remote control unit supplied with the AV equipment to operate it.
0 If the remote control memory becomes full, “FULL” is shown on the remote control
display. If you want to learn the code, you should erase other learned button.
Press input source select buttons to select the input
source.
NOTE
Select the button to be learned.
0 The learning function is unavailable for all ZONE SELECT, SET, AVR, POWER X,
VOLUME df, SMART SELECT, SOUND MODE and input source select buttons
in any mode.
0 If no buttons are pressed for approximately 1 minutes while in the LEARN mode,
the remote control unit automatically exits from the LEARN mode.
LEARN indicator lights up.
Press and hold the button that you want to register on
the other remote control until “OK” is displayed on the
Marantz remote control display.
0 If “NG” is shown on the remote control display, perform step 4
again.
Front panel
Display
Appendix
The LEARN indicator turns off, and the remote control unit exits
learn mode.
The input source is shown in the remote control display.
4
Tips
Rear panel
302
Remote
Index
Contents
Connections
Playback
Settings
Codes can be erased in three ways: by buttons, sources, and by all
memory contents.
1
2
o Delete remote control codes for each button
Press and hold SET until the LEARN indicator blinks.
Press and hold POWER X and press the learned input
source select buttons to be erased twice.
Press input source select buttons to select the input
source you want to delete.
3
Press and hold POWER X and press the learned button
to be erased twice.
o Delete remote control codes for all input
sources
“ERASE” is shown in the remote control display.
4
Press and hold SET until the LEARN indicator blinks.
“ERASE” is shown in the remote control display.
The input source is shown in the remote control display.
3
Appendix
o Delete remote control codes for each input
source
Delete saved remote control codes
1
2
Tips
1
2
Press SET.
0 The LEARN indicator turn off.
3
Front panel
Display
Rear panel
303
Press SET.
0 The LEARN indicator turn off.
Press and hold SET until the LEARN indicator blinks.
Press and hold POWER X and press AVR twice.
“ERASE” is shown in the remote control display.
Press SET.
0 The LEARN indicator turn off.
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Setting the back light
You can turn off the backlight of the remote control unit.
0 Backlight is set on in the factory settings.
Disabling the backlight
SET
1
Press and hold both SET and Light button until “OFF”
indicator flashes twice.
Turning the backlight on
Light button
Press and hold both SET and Light button until “ON”
indicator flashes twice.
.
1
Front panel
Display
Rear panel
304
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Specifying the zone used with the remote control unit
ZONE
SELECT
When the ZONE SELECT is pressed, only the set zone can be operated
with the remote control unit.
This is useful for preventing mistaken operation.
0 The factory setting is “M23”.
SET
1
2
Press and hold ZONE SELECT and SET for at least 3
seconds.
Use ui to set the zone to be used and press ENTER.
“SET” flashes four times on the remote control unit and the normal
operation mode is restored.
Remote control unit display
MAIN ZONE only
M2
MAIN ZONE / ZONE2
M23
MAIN ZONE / ZONE2 / ZONE3
.
ui
ENTER
Zone to be used
M
Front panel
Display
Rear panel
305
Remote
Index
Contents
Connections
Playback
Settings
o Contents
Tips
Appendix
Troubleshooting
Tips
I want the volume not to become too loud by mistake
307
I want to keep the volume at the same level when I turn the power on
307
I want to have the subwoofer always output audio
307
I want to make human voices in the movies clearer
307
I want to keep bass and clarity during playback at a lower volume
level
307
I want to automatically adjust the volume level difference in content
such as TV and movies
307
Power does not turn on / Power is turned off
310
Operations cannot be performed through the remote control unit
311
Display on this unit shows nothing
311
No sound comes out
312
Desired sound does not come out
313
Sound is interrupted or noise occurs
315
No video is shown on the TV
316
The menu screen is not displayed on the TV
318
iPod cannot be played back
319
I want to set the optimized listening environment after changing the
configuration/position of the speakers or changing a speaker to a new
one
308
USB memory devices cannot be played back
320
File names on the iPod/USB memory device are not displayed
properly
321
I want to combine a desired video with the current music
308
Bluetooth cannot be played back
321
I want to skip unused input sources
308
The Internet radio cannot be played back
322
I want to enjoy the same music in all zones at the home party, etc.
308
Music files on PC or NAS cannot be played back
323
I want to minimize the delay in video signals when I’m playing a game
on my game console
308
I want to operate this unit using the TV remote control
Front panel
Display
308
Rear panel
306
Various online services cannot be played
323
The HDMI control function does not work
324
Cannot connect to a wireless LAN network
325
When using HDMI ZONE2, the devices does not function properly
326
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Tips
I want the volume not to become too loud by mistake
0 Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake.
You can set this for each zone. (“Volume” (v p. 211), “Volume Limit” (v p. 283))
I want to keep the volume at the same level when I turn the power on
0 By default, the volume setting when power was previously set to standby on this unit is applied at next power on with no change. To use a fixed volume
level, set the volume level at power on for “Power On Volume” in the menu. You can set this for each zone. (“Volume” (v p. 211), “Power On
Volume” (v p. 283))
I want to have the subwoofer always output audio
0 Depending on the input signals and sound mode, the subwoofer may not output audio. When “Subwoofer Mode” in the menu is set to “LFE+Main”, you
can have the subwoofer always output audio. (v p. 266)
I want to make human voices in the movies clearer
0 Use “Dialog Level Adjust” in the menu to adjust the level. (v p. 204)
I want to keep bass and clarity during playback at a lower volume level
0 Set “Dynamic EQ” in the menu to “On”. This setting corrects the frequency characteristics to allow you to enjoy clear sound without the bass being lost
even during playback at a lower volume level. (v p. 213)
I want to automatically adjust the volume level difference in content such as TV and movies
0 Set “Dynamic Volume” in the menu. Volume level changes (between quiet scenes and loud scenes) in TV shows or movies are automatically adjusted
to your desired level. (v p. 214)
Front panel
Display
Rear panel
307
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new
one.
0 Perform Audyssey® Setup. This automatically makes the optimized speaker settings for the new listening environment. (v p. 238)
I want to combine a desired video with the current music
0 Set “Video Select” in the option menu to “On”. You can combine the current music with your desired video source from a Set-top Box or DVD, etc. while
listening to music from the HD Radio, CD, Phono, Internet radio, USB or Bluetooth. (v p. 159)
I want to skip unused input sources
0 Set unused input sources for “Hide Sources” in the menu. This allows you to skip unused input sources when turning the INPUT SELECTOR knob on
this unit. (v p. 236)
I want to enjoy the same music in all zones at the home party, etc.
0 Set “All Zone Stereo” in the option menu to “Start”. You can simultaneously play back music in another room (ZONE2, ZONE3) that is played back in
MAIN ZONE. (v p. 161)
I want to minimize the delay in video signals when I’m playing a game on my game console
0 When the video is delayed against button operations with the controller on the game console, set “Video Mode” in the menu to “Game”. (v p. 227)
I want to operate this unit using the TV remote control
0 Select “AV Receiver” in a TV menu such as “Input”z or “Operate Connected HDMI Device”z. The Smart Menu of this unit is displayed on the TV. This
Smart Menu can be operated using the remote control of your TV.
z The selection method differs depending on your TV. See the owner's manual of your TV for details.
Front panel
Display
Rear panel
308
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Troubleshooting
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the corresponding symptoms in this section.
If the symptoms do not match any of those described here, consult your dealer as it could be due to a fault in this unit. In this case, disconnect the power
immediately and contact the store where you purchased this unit.
Front panel
Display
Rear panel
309
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Power does not turn on / Power is turned off
Symptom
Cause / Solution
Page
Power does not turn on.
0 Check whether the power plug is correctly inserted into the power outlet.
101
Power automatically turns
off.
0 The sleep timer is set. Turn on the power again.
180
0 “Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. To
281
Power turns off and the
power indicator flashes in
red approx. every 2
seconds.
0 The protection circuit has been activated due to a rise in temperature within this unit. Turn the power off,
356
0 Please re-install this unit in a place having good ventilation.
-
Power turns off and the
power indicator flashes in
red approx. every 0.5
seconds.
0 Check the speaker connections. The protection circuit may have been activated because speaker cable
46
disable “Auto Standby”, set “Auto Standby” on the menu to “Off”.
wait about an hour until this unit cools down sufficiently, and then turn the power on again.
core wires came in contact with each other or a core wire was disconnected from the connector and
came in contact with the rear panel of this unit. After unplugging the power cord, take corrective action
such as firmly re-twisting the core wire or taking care of the connector, and then reconnect the wire.
0 Turn down the volume and turn on the power again.
103
0 This unit’s amplifier circuit has failed. Unplug the power cord and contact our customer service center.
-
The power to this unit does 0 Power in either ZONE2 or ZONE3 is on. To turn off the power of this unit (standby), press the ZONE2
not turn off when you press
ON/OFF or ZONE3 ON/OFF button on the main unit or press the ZONE SELECT button on the remote
the Power operation
control unit to select a “ZONE2” or “ZONE3”, then press POWER X button on the remote control unit.
button. “ZONE2 On” or
“ZONE3 On” appears on
the display.
-
Front panel
Display
Rear panel
310
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Operations cannot be performed through the remote control unit
Symptom
Operations cannot be
performed through the
remote control unit.
Cause / Solution
Page
0 Batteries are worn out. Replace with new batteries.
10
0 Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within
10
30°.
0 Remove any obstacle between this unit and the remote control unit.
-
0 Insert the batteries in the proper direction, checking the q and w marks.
10
0 The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb
-
0 The operation target zone does not correspond to the zone setting specified on the remote control unit.
201
0 The remote control unit operating mode is used to operate other devices. Press MAIN to set the operating
297
light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light.
Press ZONE SELECT to select the zone to operate.
mode to AVR.
0 When using a 3D video device, the remote control unit of this unit may not function due to effects of
infrared communications between units (such as TV and glasses for 3D viewing). In this case, adjust the
direction of units with the 3D communications function and their distance to ensure they do not affect
operations from the remote control unit of this unit.
-
o Display on this unit shows nothing
Symptom
Display is off.
Front panel
Cause / Solution
Page
0 Set “Dimmer” on the menu to something other than “Off”.
285
0 When the sound mode is set to “Pure Direct”, the display is off.
164
Display
Rear panel
311
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o No sound comes out
Symptom
No sound comes out of
speakers.
Cause / Solution
Page
0 Check the connections for all devices.
36
0 Insert connection cables all the way in.
-
0 Check that input connectors and output connectors are not reversely connected.
-
0 Check cables for damage.
-
0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the
46
metal part on speaker terminals.
0 Securely tighten the speaker terminals. Check speaker terminals for looseness.
46
0 Check that a proper input source is selected.
103
0 Adjust the volume.
104
0 Cancel the mute mode.
104
0 Check the digital audio input connector setting.
233
0 Check the digital audio output setting on the connected device. On some devices, the digital audio output
-
0 When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the
-
No sound comes out when
using the DVI-D
connection.
0 When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a
-
No sound comes out of a
TV that is connected via
HDMI.
0 Audio signals input to 7.1CH IN connectors on this unit cannot be output to the TV.
-
is set to off by default.
speaker terminal and PRE OUT connector.
Front panel
separate audio connection.
Display
Rear panel
312
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Desired sound does not come out
Symptom
The volume does not
increase.
Cause / Solution
Page
0 The maximum volume is set too low. Set the maximum volume using “Limit” on the menu.
0 Appropriate volume correction processing is performed according to the input audio format and settings,
so the volume may not reach the upper limit.
No sound comes out with
the HDMI connection.
0 Check the connection of the HDMI connectors.
84
222
0 When using the HDMI control function, check that the audio output is set to the AV amplifier on the TV.
177
0 Check that speaker cables are properly connected.
-
0 Check that a selection other than “None” is set for the “Speaker Config.” setting in menu.
257
0 Check the “Assign Mode” setting in the menu.
249
0 When the sound mode is “Stereo” and “Virtual”, audio is only output from the front speakers and
subwoofer.
No sound is produced from 0 Check the subwoofer connections.
subwoofer.
0 Turn on the subwoofer’s power.
-
0 Set “Speaker Config.” - “Subwoofer” in the menu to “1 spkr” or “2 spkrs”.
258
0 When “Speaker Config.” - “Front” in the menu is set to “Large”, depending on the input signal and the
258
0 When no subwoofer audio signal (LFE) is included in the input signals, no sound may be output from the
266
0 You can make the subwoofer always output sound by setting the “Subwoofer Mode” to “LFE+Main”.
266
subwoofer.
0 Check that the digital audio output setting on the connected device is set to “DTS”.
-
0 Set “Decode Mode” on the menu to “Auto” or “DTS”.
Dolby Atmos, Dolby
TrueHD, DTS-HD, Dolby
Digital Plus audio is not
output.
Front panel
-
-
sound mode, no sound may be output from the subwoofer.
DTS sound is not output.
-
0 When outputting HDMI audio from the speakers, set “HDMI Audio Out” on the menu to “AVR”. To output
from the TV, set “TV”.
No sound comes out of a
specific speaker.
211
237
0 Make HDMI connections.
88
0 Check the digital audio output setting on the connected device. On some devices, “PCM” is set by default.
-
Display
Rear panel
313
Remote
Index
Contents
Connections
Playback
Symptom
Settings
Tips
Appendix
Cause / Solution
Page
DTS Neural:X mode cannot 0 DTS Neural:X cannot be selected when using the headphones.
be selected.
Dolby Surround mode
cannot be selected.
-
0 Dolby Surround cannot be selected when using the headphones.
-
Audyssey MultEQ® XT32, 0 These cannot be selected when you have not performed Audyssey® Setup.
Audyssey Dynamic EQ®,
0 Switch to a sound mode other than “Direct” or “Pure Direct”.
Audyssey Dynamic
0 These cannot be selected when using the headphones.
Volume® and Audyssey
LFC™ cannot be selected.
238
Audyssey DSX® cannot be 0 It can be selected when using the front height or front wide speakers.
selected.
0 It can be selected when using the center speaker.
259
164
-
257
0 Switch the sound mode to Dolby sound mode or DTS sound mode.
163
0 This cannot be selected when using the headphones.
-
0 This cannot be set when the input signal is a 2-channel source.
-
“M-DAX” cannot be
selected.
0 Check that an analog signal or PCM signal (Sample Rate = 44.1/48 kHz) is input. For playback of
210
0 Switch to a sound mode other than “Direct” or “Pure Direct”.
164
No audio is output from
PRE OUT or speakers for
ZONE2/ZONE3.
0 In ZONE2/ZONE3, the audio can be played back when signals input from digital connectors (OPTICAL/
multichannel signals such as Dolby Digital or DTS surround, “M-DAX” cannot be used.
COAXIAL) are in 2ch PCM format.
0 In ZONE2, the audio can be played back when signals input from the HDMI connector are in 2ch PCM
format. To play back the audio in ZONE2 irrespective of the input signal format, set “HDMI Audio” in the
menu to “PCM”. Depending on the played back device, the audio may not be played back even with this
setting. In that case, set the audio format to “PCM (2ch)” on the played back device.
0 When listening to audio from a Bluetooth device in ZONE2/ZONE3, remove any obstructions between the
Bluetooth device and this unit and use it within a range of about 32.8 ft/10 m.
Front panel
Display
Rear panel
314
Remote
Index
-
283
-
Contents
Connections
Playback
Settings
Tips
Appendix
o Sound is interrupted or noise occurs
Symptom
During playback from the
Internet radio or USB
memory device, sound is
occasionally interrupted.
Cause / Solution
Page
0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
-
0 The network communication speed is slow or the radio station is busy.
-
When making a call on
iPhone, noise occurs in
audio output on this unit.
0 When making a call, keep a distance of 0.7 ft/20 cm or longer between iPhone and this unit.
-
Noise often occurs in
FM/AM broadcasting.
0 Change the antenna orientation or position.
95
The sounds appear to be
distorted.
0 Separate the AM loop antenna from the unit.
-
0 Use an outdoor antenna.
95
0 Separate the antenna from other connection cables.
95
0 Lower the volume.
104
0 Set “Off” to the ECO Mode. When “On” or “Auto” is in the ECO Mode, the audio may by distorted when
279
the playback volume is high.
Sound cuts out when using 0 If nearby devices cause playback to cut out due to electronic interference, switch to a wired LAN
Wi-Fi connection.
connection.
0 Particularly when you play back large music files, depending on your wireless LAN environment, the
playback sound may be interrupted. In this case, make the wired LAN connection.
Front panel
Display
Rear panel
315
Remote
Index
97
271
Contents
Connections
Playback
Settings
Tips
Appendix
o No video is shown on the TV
Symptom
No picture appears.
0 Check the connections for all devices.
Cause / Solution
Page
84
0 Insert connection cables all the way in.
-
0 Check that input connectors and output connectors are not reversely connected.
-
0 Check cables for damage.
-
0 Match the input settings to the input connector of the TV connected to this unit.
233
0 Check that the proper input source is selected.
103
0 Check the video input connector setting.
233
0 Check that the resolution of the player corresponds to that of the TV.
289
0 Check whether the TV is compatible with copyright protection (HDCP). If connected to a device not
330
compatible with HDCP, video will not be output correctly.
0 To enjoy content that is copyright protected by HDCP 2.2, use a playback device and TV compatible with
HDCP 2.2 only.
0 The HDMI signal cannot be converted to an analog signal. Use analog connections.
0 Use an “High Speed HDMI cable with Ethernet” or “High speed cable” that comes with the HDMI logo if
-
331
-
you wish to playback 4K (60/50 Hz) video.
0 With the DVI-D connection, on some device combinations, devices may not function properly due to the
copy guard copyright protection (HDCP).
330
No video from an input
source such as a game
console is shown on the
TV.
0 When special video signals are input from a game console, etc., the video conversion function may not
-
While the menu is being
displayed, no video is
shown on the TV.
0 The video being played will not appear in the background of the menu when the menu is operated during
-
No video is shown on the
TV with the DVI-D
connection.
Front panel
function. Connect the input connector to the monitor output connector of the same type.
playback of the following video signals.
- Some images of 3D video contents
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
- 4K video
Display
Rear panel
316
Remote
Index
Contents
Connections
Playback
Settings
Tips
Symptom
Cause / Solution
When using HDMI ZONE2, 0 When ZONE2 is operated with the same input source selected for MAIN ZONE and ZONE2, video in
MAIN ZONE may be interrupted.
the video output in MAIN
ZONE is interrupted.
Front panel
Display
Rear panel
317
Remote
Index
Appendix
Page
-
Contents
Connections
Playback
Settings
Tips
Appendix
o The menu screen is not displayed on the TV
Symptom
The menu screen or status
information screen is not
displayed on the TV.
Cause / Solution
Page
0 The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is
connected to a TV using a different video output connector, operate while watching the display on this
unit.
0 The status information will not appear on the TV when the following video signals are being played.
290
0 When a 2D video is converted to a 3D video on the TV, the menu screen or status information screen is
290
0 In the pure direct playback mode, the menu screen or status information is not displayed. Switch to a
163
0 Set the “TV Format” setting in the menu to a selection that is appropriate for the TV.
232
- Some images of 3D video content
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
not displayed properly.
sound mode other than the pure direct mode.
Front panel
-
Display
Rear panel
318
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o iPod cannot be played back
Symptom
Cause / Solution
Page
iPod cannot be connected. 0 When using iPod by connecting it to the USB port, some iPod variations are not supported.
0 When iPod is connected by using a USB cable other than the genuine cable, iPod may not be
-
0 This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN). Connect it to
97
0 The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay. Update the firmware to
-
0 The volume on iTunes / iPhone / iPod touch / iPad is set to the minimum level. The volume on iTunes /
-
recognized. Use a genuine USB cable.
The AirPlay icon ' is not
displayed on iTunes /
iPhone / iPod touch / iPad.
the same LAN as this unit.
the latest version.
Audio is not output.
iPhone / iPod touch / iPad is linked with the volume on this unit. Set a proper volume level.
0 The AirPlay playback is not performed, or this unit is not selected. Click the AirPlay icon ' on the
148
0 Quit the application running in the background of the iPhone/iPod touch/iPad, and then play using
-
0 Some external factors may be affecting the wireless connection. Modify the network environment by
-
0 Enable the “Allow iTunes audio control from remote speakers” setting on iTunes. Then, you can perform
-
iTunes / iPhone / iPod touch / iPad screen and select this unit.
Audio is interrupted during
the AirPlay playback on
iPhone / iPod touch / iPad.
AirPlay.
taking measures such as shortening the distance from the wireless LAN access point.
iTunes cannot be played
back through the remote
control unit.
Front panel
93
playback, pause, and skip operations through the remote control unit.
Display
Rear panel
319
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o USB memory devices cannot be played back
Symptom
“No connection” is
displayed.
Cause / Solution
Page
0 This unit cannot recognize the USB memory device. Disconnect and reconnect the USB memory device.
93
0 Mass storage class compatible USB memory devices are supported.
-
0 This unit does not support a connection through a USB hub. Connect the USB memory device directly to
-
0 The USB memory device must be formatted to FAT16 or FAT32.
-
0 Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.
-
the USB port.
When using a type of portable hard disc drive compatible with the USB connection that requires power
from an AC adapter, use the AC adapter that came with the drive.
Files on the USB memory
device are not displayed.
0 Files of a type not supported by this unit are not displayed.
110
0 This unit is able to display files in a maximum of eight folder layers. A maximum of 5000 files (folders) can
also be displayed for each layer. Modify the folder structure of the USB memory device.
Files on a USB memory
device cannot be played.
0 When multiple partitions exist on the USB memory device, only files on the first partition are displayed.
-
0 Files are created in a format that is not supported by this unit. Check the formats supported by this unit.
333
0 You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be
-
0 Playback may not be possible if the album art file size exceeds 2 MB.
-
played on this unit.
Front panel
-
Display
Rear panel
320
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o File names on the iPod/USB memory device are not displayed properly
Symptom
The file names are not
displayed properly (“...”,
etc.).
Cause / Solution
Page
0 Characters that cannot be displayed have been used. On this unit, characters that cannot be displayed
are replaced with a “. (period)”.
-
o Bluetooth cannot be played back
Symptom
Bluetooth devices cannot
be connected to this unit.
The sound is cut off.
Cause / Solution
Page
0 The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the
-
0 Bring the Bluetooth device near to this unit.
-
Bluetooth device to enable the Bluetooth function.
0 The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
-
0 Turn the power of the Bluetooth device off and on again, and then try again.
-
0 Bring the Bluetooth device near to this unit.
-
0 Remove obstructions between the Bluetooth device and this unit.
-
0 To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN
-
0 Reconnect the Bluetooth device.
-
devices and other Bluetooth devices.
Front panel
Display
Rear panel
321
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o The Internet radio cannot be played back
Symptom
Cause / Solution
Page
A list of broadcasting
stations is not displayed.
0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status.
Internet Radio cannot be
played.
0 The selected radio station is broadcasting in a format that is not supported by this unit. Formats that can
0 Perform the network diagnostic mode.
97
-
be played back in this unit are MP3, WMA and AAC.
0 The firewall function is enabled on the router. Check the firewall setting.
336
-
0 The IP address is not properly set.
274
0 Check the power of the router is on.
-
0 To obtain the IP address automatically, enable the DHCP server function on the router. Also, set the
274
0 To obtain the IP address manually, set the IP address and proxy on this unit.
274
0 Some radio stations broadcast silently during some time period. In this case, no audio is output. Wait for a
130
DHCP setting to “On” on this unit.
while and select the same radio station, or select another radio station.
Cannot connect to favorite
radio stations.
0 Radio station is not currently in service. Register radio stations in service.
-
For some radio stations,
“Connection down” is
displayed and station
cannot be connected to.
0 The selected radio station is not in service. Select a radio station in service.
-
Front panel
Display
Rear panel
322
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Music files on PC or NAS cannot be played back
Symptom
Files stored on a computer
cannot be played.
Cause / Solution
Page
0 Files are stored in a non-compatible format. Record in a compatible format.
335
0 Files that are copyright protected cannot be played on this unit.
-
0 The set’s USB port cannot be used for connection to a computer.
-
0 Media sharing settings are not correct. Change media sharing settings so that the unit can access the
folders on your computer.
Server is not found, or it is
not possible to connect to
the server.
0 The computer’s or router’s firewall is activated. Check the computer’s or router’s firewall settings.
-
0 Computer’s power is not turned on. Turn on the power.
-
0 Server is not running. Launch the server.
-
0 Set’s IP address is wrong. Check the set’s IP address.
Music files on PC cannot
be played back.
270
0 Even if PC is connected to the USB port on this unit, music files on it cannot be played back. Connect PC
to this unit through the network.
Files on PC or NAS are not 0 Files of a type not supported by this unit are not displayed.
displayed.
Music stored on a NAS
cannot be played.
134
97
335
0 If you use a NAS in conformity with the DLNA standard, enable the DLNA server function in the NAS
setting.
0 If you use a NAS that does not conform with the DLNA standard, play the music via a PC. Set Windows
Media Player’s media sharing function and add NAS to the selected play folder.
0 If connection is restricted, set audio equipment as the connection target.
-
134
-
o Various online services cannot be played
Symptom
Various online services
cannot be played.
Front panel
Cause / Solution
Page
0 The online service may have been discontinued.
Display
Rear panel
323
-
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o The HDMI control function does not work
Symptom
The HDMI control function
does not work.
Cause / Solution
Page
0 Check that “HDMI Control” in the menu is set to “On”.
223
0 You cannot operate devices that are not compatible with the HDMI control function. In addition,
177
0 Check that the HDMI control function setting is enabled on all devices connected to this unit.
177
0 When you make connection related changes such as connecting an additional HDMI device, the link
177
depending on the connected device or the settings, the HDMI control function may not work. In this case,
operate the external device directly.
operation settings may be initialized. Turn off this unit and devices connected via HDMI, and turn them on
again.
0 The HDMI MONITOR 2 connector is not compatible with the HDMI control function. Use the HDMI
MONITOR 1 connector to connect to the TV.
Front panel
Display
Rear panel
324
Remote
Index
84
Contents
Connections
Playback
Settings
Tips
Appendix
o Cannot connect to a wireless LAN network
Symptom
Cannot connect to the
network.
Cause / Solution
Page
0 The network name (SSID), password and encryption setting have not been set up correctly. Configure the
273
0 Shorten the distance from the wireless LAN access point and remove any obstructions to improve access
-
network settings according to the setting details of this unit.
first before re-connecting again. Place the unit away from microwave ovens and other network access
points.
Cannot connect to WPS.
0 Configure the access point channel settings away from channels that are being used by other networks.
-
0 This unit is not compatible with WEP (TSN).
-
0 Check that the WPS mode of the router is operating.
-
0 Press the WPS button on the router and then press the “Connect” button displayed on the TV within 2
-
0 A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to
273
minutes.
“None”, “WPA-PSK (AES)” or WPA2-PSK (AES).
0 If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the WPS
button. In this case, use the “Scan Networks” or “Manual” method to connect.
Cannot connect to the
network using iPhone/iPod
touch/iPad.
Front panel
-
0 Update the iPhone/iPod touch/iPad firmware to the latest version.
-
0 When using a USB cable to configure the settings, the iOS device firmware version needs to support iOS
-
5 or later. When configuring the settings via a wireless connection, iOS 7 or later needs to be supported.
Display
Rear panel
325
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o When using HDMI ZONE2, the devices does not function properly
Symptom
When using MAIN ZONE,
video output is interrupted
in HDMI ZONE2.
Cause / Solution
Page
0 With the same input source selected for MAIN ZONE and ZONE2, when you operate MAIN ZONE, video
-
may be interrupted in HDMI ZONE2.
When using HDMI ZONE2, 0 Check that the power is on for ZONE2.
no video or audio is output 0 Check the input source for ZONE2.
from the TV in ZONE2.
0 The AUX1-HDMI connector on the front panel does not support the HDMI ZONE2 function.
0 In ZONE2, playback is only possible when the input signals are HDMI signals.
on the playback device. Alternatively, set “ZONE2 Setup” - “HDMI Audio” in the menu to “PCM”.
0 When the TV is not compatible with the resolution of the input video, no video is output. Set the output
resolution on the playback device to a resolution that is compatible with the TV.
When using HDMI ZONE2, 0 When the same input source is selected for MAIN ZONE and ZONE2, the audio format is limited
MAIN ZONE audio is
according to the specifications of the TV in ZONE2.
played back as PCM.
Display
Rear panel
326
Remote
196
-
-
0 When the TV does not support the input audio format, audio is not output. Set the audio format to “PCM”
Front panel
196
Index
283
-
-
Contents
Connections
Playback
Settings
Tips
Appendix
Resetting factory settings
Perform this procedure if the display is abnormal or if operations cannot be performed.
Various settings are reset to the factory default values. Make settings again.
X
1
2
GAME
3
.
Display
Press X while simultaneously pressing GAME and
A-DSX.
Remove your fingers from the two buttons when
“Initialized” appears on the display.
0 Before restoring the default setting, the “Save” function of the web control function
can be used to store the various settings of the unit. (v p. 186)
However, account information for network content and information on registered
favorites cannot be stored.
0 When deleting a Pandora account, carry out steps 1 to 3 after signing out in the
Pandora service. (v p. 143)
A-DSX
Front panel
Turn off the power using X.
Rear panel
327
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
About HDMI
HDMI is an abbreviation of High-Definition Multimedia Interface, which is
an AV digital interface that can be connected to a TV or amplifier.
With the HDMI connection, high definition video and high quality audio
formats adopted by Blu-ray Disc players (Dolby Digital Plus, Dolby
TrueHD, DTS-HD, DTS-HD Master Audio) can be transmitted, which is not
possible with the analog video transmission.
Furthermore, in the HDMI connection, audio and video signals can be
transmitted through a single HDMI cable, while in conventional
connections it is necessary to provide audio and video cables separately
for connection between devices. This allows you to simplify the wiring
configuration that tends to be quite complex in a home theater system.
This unit supports the following HDMI functions.
0 3D
This unit supports input and output of 3D (3 dimensional) video signals
of HDMI. To play back 3D video, you need a TV and player that
provide support for the HDMI 3D function and a pair of 3D glasses.
0 4K
This unit supports input and output of 4K (3840 x 2160 pixels) video
signals of HDMI.
0 Content Type
It automatically makes settings suitable for the video output type
(content information).
0 Adobe RGB color, Adobe YCC601 color
0 Deep Color
The color space defined by Adobe Systems Inc. Because it is a wider
color space than RGB, it can produce more vivid and natural images.
An imaging technology supported by HDMI. Unlike RGB or YCbCr,
which uses 8 bits (256 shades) per color, it can use 10 bits (1024
shades), 12 bits (4096 shades), or 16 bits (65536 shades) to produce
colors in higher definition.
Both devices linked via HDMI must support Deep Color.
0 sYCC601 color
Each of these color spaces defines a palette of available colors that is
larger than the traditional RGB color model.
0 “x.v.Color”
This function lets HDTVs display colors more accurately. It enables
display with natural, vivid colors.
“x.v.Color” is trademark of Sony Corporation.
Front panel
Display
Rear panel
328
Remote
Index
Contents
Connections
Playback
Settings
0 Auto Lip Sync
0 ARC (Audio Return Channel)
This function can automatically correct delay between the audio and
video.
Use a TV that is compatible with the Auto Lip Sync function.
Even when the power to this unit is set to standby, signals input from
the HDMI input connector are output to a TV or other device that is
connected to the HDMI output connector.
0 HDMI Control
If you connect the unit and an HDMI control function compatible TV or
player with an HDMI cable and then enable the HDMI control function
setting on each device, the devices will be able to control each other.
0 Power off link
This unit power off can be linked to the TV power off step.
0 Audio output destination switching
From the TV, you can switch whether to output audio from the TV or
the AV amplifier.
0 Volume adjustment
You can adjust this unit’s volume in the TV volume adjustment
operation.
0 Input source switching
You can switch this unit input sources through linkage to TV input
switching.
When playing the player, this unit input source switches to the
source for that player.
Display
Rear panel
Appendix
This function transmits audio signals from the TV to this unit through
the HDMI cable and plays back the audio from the TV on this unit
based on the HDMI control function.
If a TV without the ARC function is connected via HDMI connections,
video signals of the playback device connected to this unit are
transmitted to the TV, but this unit can not play back the audio from the
TV. If you want to enjoy surround audio for TV program, a separate
audio cable connection is required.
In contrast, if a TV with the ARC function is connected via HDMI
connections, no audio cable connection is required. Audio signals from
the TV can be input to this unit through the HDMI cable between this
unit and the TV. This function allows you to enjoy surround playback
on this unit for the TV.
0 HDMI Pass Through
Front panel
Tips
329
Remote
Index
Contents
Connections
Playback
Settings
o Supported audio formats
2-channel, 32 kHz – 192 kHz, 16/20/24 bit
Multi-channel
Linear PCM
7.1-channel, 32 kHz – 192 kHz, 16/20/24 bit
Bitstream
Dolby Digital / DTS / Dolby Atmos / Dolby TrueHD /
Dolby Digital Plus / DTS:X / DTS-HD Master Audio /
DTS-HD High Resolution Audio / DTS Express
DSD
2-channel – 5.1-channel, 2.8224 MHz
In order to play back digital video and audio such as BD video or DVD
video via HDMI connection, both this unit and the TV or player must to
support the copyright protection system known as HDCP (Highbandwidth Digital Content Protection System). HDCP is copyright
protection technology comprised of data encryption and authentication of
the connected AV devices. This unit supports HDCP.
0 If a device that does not support HDCP is connected, video and audio
are not output correctly. Read the owner’s manual of your television or
player for more information.
o Supported video signals
0 When connecting this unit to a device that is compatible with the Deep Color, 4K
and ARC functions, use a “High Speed HDMI cable with Ethernet” that bears the
HDMI logo.
0 480i
0 480p
0 576i
0 576p
0 720p 60/50Hz
0 1080i 60/50Hz
0 1080p 60/50/24Hz
0 4K 60/50/30/25/24 Hz
Display
Appendix
Copyright protection system
2-channel Linear
PCM
Front panel
Tips
Rear panel
330
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Video conversion function
This unit automatically converts the input video signals as shown in the diagram before outputting them to the TV.
This unit
Video device
Input (IN)
Output
HDMI-compatible TV
Output
(MONITOR OUT)
HDMI signal
HDMI signal
HDMI connector
HDMI connector
HDMI connector
HDMI connector
HDMI-incompatible TV
Component video
signal
Component video
signal
Component video
connectors
Video connector
Front panel
Video signal
Component video
connectors
Video connector
Display
Component video
connectors
Video signal
Component video
connectors
Video connector
Rear panel
331
0 The main zone video conversion
function is compatible with the
following formats: NTSC, PAL,
SECAM, NTSC4.43, PAL-N, PAL-M
and PAL-60.
Video connector
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
.
This unit can convert the input video signals to the resolution that is set for “Resolution” in the menu before outputting them to the TV. (v p. 229)
Input signal
HDMI
Component Video
Video
Output signal
HDMI
1080p
1080p 24Hz
480i/576i
480p/576p
720p
1080i
4K 30/25/24Hz
4K 60/50Hz
480i/576i
480p/576p
720p
1080i
1080p 24Hz
1080p
4K 30/25/24Hz
4K 60/50Hz
480i/576i
480p/576p
720p
1080i
1080p
480i/576i
Rear panel
332
z
z The HDMI connector on the front panel supports YCbCr420 format only.
Front panel
Display
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back a USB memory devices
0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.
0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4.
0 This unit is compatible with WMA META tags.
0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played
back properly.
o Compatible formats
Sampling frequency
Bit rate
48 – 192
kbps
32 – 320
kbps
Extension
–
.wav
32/44.1/48 kHz
16 – 320
kbps
32/44.1/48/88.2/
96/176.4/192 kHz
32/44.1/48/88.2/
96 kHz
.aac/
.m4a/
.mp4
–
.flac
–
.m4a
DSD
2.8 MHz
–
AIFF
32/44.1/48/88.2/
96/176.4/192 kHz
–
.dsf/
.dff
.aif/
.aiff
WMAz1
32/44.1/48 kHz
MP3
32/44.1/48 kHz
WAV
32/44.1/48/88.2/
96/176.4/192 kHz
MPEG-4 AACz1
FLAC
ALACz2
Front panel
Display
z1 Only files that are not protected by copyright can be played on this unit.
Content downloaded from pay sites on the Internet are copyright protected.
Also, files encoded in WMA format when ripped from a CD, etc. on a computer
may be copyright protected, depending on the computer’s settings.
.wma
.mp3
Rear panel
z2 Copyright [2012] [D&M Holdings. Inc.]
Licensed under the Apache License, Version 2.0 (the “License”); you may not
use this file except in compliance with the License. You may obtain a copy of
the License at
http://www.apache.org/licenses/LICENSE-2.0
0 In ZONE2, it is not possible to play the DSD signal.
333
Remote
Index
Contents
Connections
Playback
Settings
The limits on the number of folders and files that can be displayed by
this unit are as follows.
Media
Memory capacity
USB memory device
8 levels
Number of folders
500
filesz2
5000
Number of
This unit supports the following Bluetooth profile.
0 A2DP (Advanced Audio Distribution Profile):
When a Bluetooth device that supports this standard is connected,
monaural and stereo sound data can be streamed at a high quality.
0 AVRCP (Audio/Video Remote Control Profile):
When a Bluetooth device that supports this standard is connected, the
Bluetooth device can be operated from this unit.
FAT16 : 2 GB, FAT32 : 2 TB
Number of folder directory levels z1
o About Bluetooth communications
z1 The limited number includes the root folder.
z2 The allowable number of files may differ according to the USB memory device
capacity and the file size.
Front panel
Display
Rear panel
Appendix
Playing back a Bluetooth device
o Maximum number of playable files and folder
Item
Tips
Radio waves broadcast from this unit may interfere with the operation
of medical devices. Make sure you turn off the power of this unit and
Bluetooth device in the following locations as radio wave interference
may cause malfunctions.
0 Hospitals, trains, aircraft, petrol kiosks and places where flammable
gases are generated
0 Near automatic doors and fire alarms
334
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back a file saved on a PC or NAS
0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.
0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4.
0 This unit is compatible with WMA META tags.
0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played
back properly.
0 A server or server software compatible with distribution in the corresponding formats is required to play music files via a network.
o Specifications of supported files
Sampling frequency
Bit rate
48 – 192
kbps
32 – 320
kbps
Extension
–
.wav
32/44.1/48 kHz
16 – 320
kbps
32/44.1/48/88.2/
96/176.4/192 kHz
32/44.1/48/88.2/
96 kHz
.aac/
.m4a/
.mp4
–
.flac
–
.m4a
DSD
2.8 MHz
–
AIFF
32/44.1/48/88.2/
96/176.4/192 kHz
–
.dsf/
.dff
.aif/
.aiff
WMAz1
32/44.1/48 kHz
MP3
32/44.1/48 kHz
WAV
32/44.1/48/88.2/
96/176.4/192 kHz
MPEG-4 AACz1
FLAC
ALACz2
Front panel
Display
z1 Only files that are not protected by copyright can be played on this unit.
Content downloaded from pay sites on the Internet are copyright protected.
Also, files encoded in WMA format when ripped from a CD, etc. on a computer
may be copyright protected, depending on the computer’s settings.
.wma
.mp3
Rear panel
z2 Copyright [2012] [D&M Holdings. Inc.]
Licensed under the Apache License, Version 2.0 (the “License”); you may not
use this file except in compliance with the License. You may obtain a copy of
the License at
http://www.apache.org/licenses/LICENSE-2.0
0 In ZONE2, it is not possible to play the DSD signal.
335
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back Internet Radio
Personal memory plus function
o Playable broadcast station specifications
The most recently used settings (input mode, HDMI output mode, sound
mode, tone control, channel level, MultEQ® XT32, Dynamic EQ, Dynamic
Volume, M-DAX and audio delay, etc.) are saved for each input source.
WMA
Sampling frequency
32/44.1/48 kHz
MP3
32/44.1/48 kHz
Bit rate
48 – 192
kbps
32 – 320
kbps
MPEG-4 AAC
32/44.1/48 kHz
16 – 320
kbps
Front panel
Display
Extension
.wma
0 “Surround Parameter” settings are stored for each sound mode.
.mp3
Last function memory
.aac/
.m4a/
.mp4
Rear panel
This function stores the settings which were made before going into the
standby mode.
336
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Sound modes and channel output
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. (v p. 257)
Channel output
.
Sound mode
Direct/Pure Direct (2-channel)
Direct/Pure Direct (Multi-channel)
DSD Direct (2-channel)
DSD Direct (Multi-channel)
Stereo
Multi Ch In
Dolby Surround z1
DTS Neural:X z2
Audyssey DSX®
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
Dolby Atmos
DTS Surround
DTS 96/24
DTS-HD
DTS Express
DTS:X
Multi Ch Stereo
Virtual
Front panel
Front
L/R
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Front
Dolby
Atmos
Enabled
L/R
Surround
Dolby
Atmos
Enabled
L/R
Back
Dolby
Atmos
Enabled
L/R
Dz3
Dz3
Dz3
Dz3
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
Dz5
D
Dz5
D
Dz5
D
Dz5
D
Dz5
D
Dz5
Center
Surround
L/R
Surround
Back
L/R
Front
Wide
L/R
Front
Height
L/R
Top Front
L/R
Top
Middle
L/R
Top Rear
L/R
Rear
Height
L/R
D
D
Dz3
Dz3
Dz3
Dz3
Dz3
Dz3
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
Dz6
D
D
Dz6
D
D
D
D
Dz3
Dz3
D
Dz3
Dz3
D
D
Dz3
Dz3
D
Dz5
D
Dz5
D
Dz5
Display
Dz3
Dz4
D
Dz3
Dz3
D
D
D
Dz3
D
D
Dz5
Rear panel
337
Remote
Surround
Top
Height
Surround
L/R
Index
Subwoofer
Dz7
D
Dz7
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
Contents
z1
z2
z3
z4
z5
z6
z7
Connections
Playback
Settings
Tips
Appendix
The applicable sound mode includes “Dolby Surround” and sound modes that have “+Dolby Surround” in the sound mode name.
The applicable sound mode includes “DTS Neural:X” and sound modes that have “+Neural:X” in the sound mode name.
A signal for each channel contained in an input signal is output as audio.
Audio is not output when “Speaker Config.” - “Surr. Back” in the menu is set to “1 spkr”. (v p. 259)
Audio is output from the speakers specified in the “Surround Parameter” – “Speaker Select” settings. (v p. 209)
Audio is output from the speakers specified in the “Audyssey DSX®” settings. (v p. 215)
Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v p. 266)
.
Upgrade (Auro-3D)
Channel output
Sound mode
Auro-3D
Auro-2D Surround
Front
L/R
Center
Surround
L/R
S
S
D
D
D
D
Surround
Back
L/R
Front
Wide
L/R
Front
Height
L/R
Top Front
L/R
Top
Middle
L/R
Top Rear
L/R
D
Rear
Height
L/R
Dz8
Surround
Top
Height
Surround
L/R
D
Dz9
D
Front
Dolby
Atmos
Enabled
L/R
Surround
Dolby
Atmos
Enabled
L/R
Back
Dolby
Atmos
Enabled
L/R
Subwoofer
D
D
z8 For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup in
place of Surround Height speakers.
z9 This is output if an Auro-3D signal is input and the input signal contains Top Surround.
Front panel
Display
Rear panel
338
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
.
Sound modes and surround parameters
Surround Parameter
Sound mode
Direct/Pure Direct (2-channel) z5
Direct/Pure Direct (Multi-channel) z5
DSD Direct (2-channel)
DSD Direct (Multi-channel) z5
Stereo
Multi Ch In
Dolby Surround
DTS Neural:X
Audyssey DSX®
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
Dolby Atmos
DTS Surround
DTS 96/24
DTS-HD
DTS Express
DTS:X
Multi Ch Stereo
Virtual
z1
Dialog Level
Adjust
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Subwoofer Level
Adjust
Sz6
S
Sz6
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Cinema EQ
Loudness
Management
z1
S
S
Dynamic
Compression
z2
S
S
S
S
S
S
S
S
S
S
S
S
S
Dialog Control
z3
Low Frequency
z4
Display
Center Spread
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
- z6 : “Sound modes and surround parameters” (v p. 342)
Front panel
Speaker Select
Rear panel
339
Remote
Index
S
Connections
Playback
Settings
Tips
Appendix
.
Contents
Surround Parameter
Sound mode
Direct/Pure Direct (2-channel) z5
Direct/Pure Direct (Multi-channel) z5
DSD Direct (2-channel)
DSD Direct (Multi-channel) z5
Stereo
Multi Ch In
Dolby Surround
DTS Neural:X
Audyssey DSX®
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
Dolby Atmos
DTS Surround
DTS 96/24
DTS-HD
DTS Express
DTS:X
Multi Ch Stereo
Virtual
z5, z7
DTS Neural:X
Auro-Matic 3D
Preset
Auro-Matic 3D
Strength
Tone
z7
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Audyssey
MultEQ® XT32 Dynamic EQ
z8
z9
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Dynamic
Volume
z9
Audyssey
LFC™
z9
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
- z10: “Sound modes and surround parameters” (v p. 342)
Front panel
Display
Rear panel
340
Remote
Index
Audyssey
DSX®
M-DAX
z10
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Contents
Connections
Playback
Settings
Tips
Appendix
.
Upgrade (Auro-3D)
Surround Parameter
Sound mode
Dialog Level
Adjust
Auro-3D
Auro-2D Surround
Subwoofer Level
Adjust
Cinema EQ
S
S
S
S
Surround Parameter
Sound mode
DTS Neural:X
Auro-3D
Auro-2D Surround
z1
Auro-Matic 3D
Preset
Auro-Matic 3D
Strength
Sz11
Sz11
Loudness
Management
z1
Tone
z7
S
S
Dynamic
Compression
z2
Dialog Control
z3
Low Frequency
z4
S
S
Audyssey
MultEQ® XT32
z8
Dynamic EQ
z9
S
S
S
S
Dynamic
Volume
z9
S
S
Audyssey
LFC™
z9
S
S
- z4, z7 - z11 : “Sound modes and surround parameters” (v p. 342)
Front panel
Display
Rear panel
341
Speaker Select
Remote
Index
Audyssey DSX®
Center Spread
M-DAX
z10
S
S
Contents
z1
z2
z3
z4
z5
z6
z7
z8
Connections
Playback
Settings
Tips
This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos signal is played.
This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS:X or DTS signal is played.
This item can be selected when a DTS:X signal that is compatible with the Dialog Control function is input.
This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
During playback in Pure Direct mode, the surround parameters are the same as in Direct mode.
This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v p. 266)
This item cannot be set when “Dynamic EQ” is set to “On”. (v p. 213)
This item cannot be set when Audyssey® Setup (Speaker Calibration) has not been performed.
z9 This item cannot be set when “MultEQ® XT32” in the menu is set to “Off”. (v p. 213)
z10 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z11 This can be set if the input signal does not contain an Auro-3D signal or if the input Auro-3D signal does not contain Front Height channels.
Front panel
Display
Rear panel
342
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Types of input signals, and corresponding sound modes
.
F This indicates the default sound mode.
S This indicates the selectable sound mode.
2-channel signal
Sound mode
NOTE
Analog /
PCM
Dolby
Digital
(+/HD)
DTS
(-HD)
Multi-channel signal
DSD
(Super
Audio
CD)
PCM
Multi
DTS Surround
DTS:X MSTR / DTS:X
DTS-HD MSTR
DTS-HD HI RES
DTS ES Dscrt6.1
DTS ES Mtrx6.1
DTS Surround
DTS 96/24
DTS Express
DTS (-HD) + Neural:X
DTS Neural:X
Dolby Surround
Dolby Atmos z1
Dolby TrueHD
Dolby Digital+
Dolby (D+) (HD) + Dolby Surround
Dolby Digital
Dolby Surround
z1
DTS:X
DTS-HD
DTS
DTS ES DTS ES
Express Dscrt6.1 Mtrx6.1
DTS
Dolby
Atmos
Dolby
TrueHD
Dolby
Digital
(EX)
DSD
(Super
Audio
CD)
Auro-3D
F
Fz3
Fz4
Sz12
z2
F
z2
S
S
F
F
S
S
F
S
S
S
F
Fz5
S
S
F
Sz6
Sz7
S
F
S
F
S
– z7, z12, z13 : “Types of input signals, and corresponding sound modes” (v p. 346)
Front panel
Dolby
Digital
Plus
Display
Rear panel
343
Remote
Index
Sz13
S
F
F
S
Sz13
Connections
Playback
Settings
Tips
Appendix
.
Contents
2-channel signal
Sound mode
Multi Ch In
Multi Ch In
Multi Ch In + Dolby Surround
Multi Ch In 7.1
Multi Ch In + Neural:X
Audyssey
Audyssey DSX®
Direct
Direct
DSD Direct
Pure Direct
Pure Direct
DSD Pure Direct
Original sound mode
Multi Ch Stereo
Virtual
Stereo
Stereo
z2, z8
NOTE
Analog /
PCM
Dolby
Digital
(+/HD)
DTS
(-HD)
Multi-channel signal
DSD
(Super
Audio
CD)
PCM
Multi
DTS:X
DTS-HD
DTS
DTS ES DTS ES
Express Dscrt6.1 Mtrx6.1
DTS
Dolby
Atmos
Dolby
TrueHD
Dolby
Digital
(EX)
F
S
Sz9
S
z2
S
S
Sz8
S
S
S
S
S
S
S
S
S
Sz10
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Display
DSD
(Super
Audio
CD)
F
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Sz10
S
S
S
S
S
S
S
S
F
S
S
F
S
S
S
S
S
S
S
S
S
S
S
S
– z10, z14 : “Types of input signals, and corresponding sound modes” (v p. 346)
Front panel
Dolby
Digital
Plus
Rear panel
344
Remote
Index
Auro-3D
Sz14
Contents
Connections
Playback
Settings
Tips
Appendix
.
Upgrade (Auro-3D)
2-channel signal
Sound mode
Auro-3D
Auro-3D
Auro-2D Surround
z6, z7, z11
NOTE
z11
z11
Analog /
PCM
Dolby
Digital
(+/HD)
S
S
S
S
Multi-channel signal
DTS
(-HD)
DSD
(Super
Audio
CD)
PCM
Multi
S
S
S
S
S
S
DTS:X DTS-HD
S
S
S
S
DTS
DTS ES DTS ES
Express Dscrt6.1 Mtrx6.1
S
S
S
S
S
S
DTS
Dolby
Atmos
Dolby
TrueHD
Dolby
Digital
Plus
Dolby
Digital
(EX)
DSD
(Super
Audio
CD)
Auro-3D
S
S
Sz6z7
Sz6z7
S
S
S
S
S
S
S
S
S
S
: “Types of input signals, and corresponding sound modes” (v p. 346)
Front panel
Display
Rear panel
345
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
z1 This item can be selected when using any of the Surround Back, Front Wide, Front Height, Top Front, Top Middle, Top Rear, Rear Height, Front Dolby, Surround Dolby
or Back Dolby speaker.
z2 This item can be selected when surround back speakers are used.
z3 This item can be selected when the input signal is DTS-HD Master Audio.
z4 This item can be selected when the input signal is DTS-HD Hi Resolution.
z5 This item can be selected when the input signal is DTS 96/24.
z6 This can be selected when the Dolby Atmos signal contains the Dolby TrueHD signal.
z7 This can be selected when the Dolby Atmos signal contains the Dolby Digital Plus signal.
z8 The default sound mode for the AirPlay playback is “Direct”.
z9 This item can be selected when the input signals contain surround back signals.
z10 This can be selected when the Dolby Atmos signal contains the Dolby TrueHD or Dolby Digital Plus signal.
z11 This item cannot be selected if the sampling frequency of the input signal is 32 kHz.
z12 This item can be selected if the Auro-3D signal contains DTS-HD Master Audio.
z13 This item can be selected if the Auro-3D signal contains Dolby TrueHD.
z14 This item can be selected if the Auro-3D signal contains Multi Channel PCM.
Front panel
Display
Rear panel
346
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Explanation of terms
o Audyssey
Audyssey Dynamic Surround Expansion (A-DSX)
Audyssey DSX® is a new surround enhancement technology that raises
the surround effect and impression to realize a larger surround space by
adding a new channel to the existing 5.1 channel system.
In research on human hearing characteristics, two points can be broadly
cited as elements that enhance the surround effect. The most important
point is the creation of horizontal spread (wide channel) at the front
(forward) area in composing a realistic surround space. The next
important point is the creation of vertical spread (height channel) in the
front (forward) area using recognizable (audible) acoustic signals so as to
create a surround space with depth.
Audyssey Dynamic EQ®
Dynamic EQ solves the problem of deteriorating sound quality as volume
is decreased by taking into account human perception and room
acoustics.
Audyssey Dynamic EQ® works in tandem with Audyssey MultEQ® XT32
to provide well-balanced sound for every listener at any volume level.
Audyssey DSX® then creates a pair of Height channels to reproduce the
next most important acoustical and perceptual cues. In addition, Audyssey
DSX® does not simply add a channel but combines the existing front,
surround and rear surround sound to develop a technology known as
“Surround Envelopment Processing” which has been incorporated into
Audyssey DSX® to further enhance the effect.
Front panel
Display
Rear panel
347
Remote
Index
Contents
Connections
Playback
Settings
Tips
Upgrade (Auro-3D)
Audyssey Dynamic Volume®
Dynamic Volume solves the problem of large variations in volume level
between television programs, commercials, and between the soft and loud
passages of movies. Audyssey Dynamic EQ® is integrated into Dynamic
Volume so that as the playback volume is adjusted automatically, the
perceived bass response, tonal balance, surround impression, and dialog
clarity remain the same.
o Auro-3D
Auro-3D®
The Auro-3D® technology suite is a groundbreaking new audio technology
that combines height-based listening formats with powerful creative tools
to deliver an unrivaled three-dimensional sound experience. Auro-3D® is
the general format name for Sound in 3D and its related speaker lay-outs.
Audyssey LFC™ (Low Frequency Containment)
Audyssey LFC™ solves the problem of low frequency sounds disturbing
people in neighboring rooms or apartments. Audyssey LFC™ dynamically
monitors the audio content and removes the low frequencies that pass
through walls, floors and ceilings. It then applies psychoacoustic
processing to restore the perception of low bass for listeners in the room.
The result is great sound that no longer disturbs the neighbors.
Auro-Matic®
Auro-Matic® up-mixing technology software is a unique creative tool that
transforms legacy Mono, Stereo and Surround content into a natural 3D or
2D listening experience.
Audyssey MultEQ® XT32
Audyssey MultEQ® XT32 is a room equalization solution that calibrates
any audio system so that it can achieve optimum performance for every
listener in a large listening area. Based on several room measurements,
MultEQ® XT32 calculates an equalization solution that corrects for both
time and frequency response problems in the listening area and also
performs a fully automated surround system setup.
Front panel
Display
Appendix
Rear panel
348
Remote
Index
Contents
Connections
Playback
Settings
o Dolby
Tips
Appendix
Dolby Digital
Dolby Digital is a multi-channel digital signal format developed by Dolby
Laboratories.
A total of 5.1-channels are played: 3 front channels (“FL”, “FR” and “C”), 2
surround channels (“SL” and “SR”) and the “LFE” channel for low
frequency effects.
Because of this, there is no crosstalk between channels and a realistic
sound field with a “three-dimensional” feeling (sense of distance,
movement and positioning) is achieved. This delivers a thrilling surround
sound experience in the home.
Dolby Atmos
Introduced first in the cinema, Dolby Atmos brings a revolutionary sense of
dimension and immersion to the Home Theater experience. Dolby Atmos
is an adaptable and scalable object based format that reproduces audio
as independent sounds (or objects) that can be accurately positioned and
move dynamically throughout the 3 dimensional listening space during
playback. A key ingredient of Dolby Atmos is the introduction of a height
plane of sound above the listener.
Dolby Atmos Stream
Dolby Digital Plus
Dolby Atmos content will be delivered to your Dolby Atmos enabled AV
receiver via Dolby Digital Plus or Dolby TrueHD on Blu-ray Disc,
downloadable files and streaming media. A Dolby Atmos stream contains
special metadata that describes the positioning of sounds within the room.
This object audio data is decoded by a Dolby Atmos AV receiver and
scaled for optimum playback through Home Theater speaker systems of
every size and configuration.
Dolby Digital Plus is an improved Dolby Digital signal format that is
compatible with up to 7.1-channels of discrete digital sound and also
improves sound quality thanks to extra data bit rate performance. It is
upwardly compatible with conventional Dolby Digital, so it offers greater
flexibility in response to the source signal and the conditions of the
playback device.
Dolby Surround
Dolby surround is a next generation surround technology that intelligently
up mixes stereo; 5.1 and 7.1 content for playback through your surround
speaker system. Dolby surround is compatible with traditional speaker
layouts, as well as Dolby Atmos enabled playback systems that employ inceiling speakers or products with Dolby speaker technology.
Front panel
Display
Rear panel
349
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o DTS
Dolby Speaker Technology (Dolby Atmos Enabled speakers)
A convenient alternative to speakers built into the ceiling, Dolby Atmos
Enabled speakers employ the ceiling above you as a reflective surface for
reproducing audio in the height plane above the listener. These speakers
feature a unique upward firing driver and special signal processing. These
features can be built into a conventional speaker or standalone speaker
module. The features minimally impact the overall speaker footprint while
providing an immersive listening experience during Dolby Atmos and
Dolby surround playback.
Dialog Control
Gives you control of the listening experience. You can lift the dialog out
from the background sounds when clarity and intelligibility are desired.
This requires that content has been authored to support Dialog Control.
DTS
This is an abbreviation of Digital Theater System, which is a digital audio
system developed by DTS. DTS delivers a powerful and dynamic
surround sound experience, and is found in the world’s finest movie
theaters and screening rooms.
Dolby TrueHD
Dolby TrueHD is a high definition audio technology developed by Dolby
Laboratories, using lossless coding technology to faithfully reproduce the
sound of the studio master.
This format provides the facility to support up to 8 audio channels with a
sampling frequency of 96 kHz/24 bit resolution and up to 6 audio channels
with a sampling frequency of 192 kHz/24 bit resolution.
DTS 96/24
DTS 96/24 is a digital audio format enabling high sound quality playback in
5.1-channels with a sampling frequency of 96 kHz and 24 bit quantization
on DVD-Video.
DTS Digital Surround
DTS™ Digital Surround is the standard digital surround format of DTS,
Inc., compatible with a sampling frequency of 44.1 or 48 kHz and up to
5.1-channels of digital discrete surround sound.
Front panel
Display
Rear panel
350
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
DTS-ES™ Discrete 6.1
DTS-HD High Resolution Audio
DTS-ES™ Discrete 6.1 is a 6.1-channel discrete digital audio format
adding a surround back (SB) channel to the DTS digital surround sound.
Decoding of conventional 5.1-channel audio signals is also possible
according to the decoder.
DTS-HD High Resolution Audio is an improved version of the conventional
DTS, DTS-ES and DTS 96/24 signals formats, compatible with sampling
frequencies of 96 or 48 kHz and up to 7.1-channels of discrete digital
sound. High data bit rate performance provides high quality sound. This
format is fully compatible with conventional products, including
conventional DTS digital surround 5.1-channel data.
DTS-ES™ Matrix 6.1
DTS-ES™ Matrix 6.1 is a 6.1-channel audio format that inserts a surround
back (SB) channel to the DTS digital surround sound through matrix
encoding. Decoding of conventional 5.1-channel audio signals is also
possible according to the decoder.
DTS-HD Master Audio
DTS Express is an audio format supporting low bit rates (max. 5.1channels, 24 to 256 kbps).
DTS-HD Master Audio is a lossless audio format created by Digital
Theater System (DTS). This format provides the facility to support up to 8
audio channels with a sampling frequency of 96 kHz/24 bit resolution and
up to 6 audio channels with a sampling frequency of 192 kHz/24 bit
resolution. It is fully compatible with conventional products, including
conventional DTS digital surround 5.1-channel data.
DTS-HD
DTS:X
DTS Express
This audio technology provides higher sound quality and enhanced
functionality than the conventional DTS and is adopted as an optional
audio for Blu-ray Disc.
This technology supports multi-channel, high data transfer speed, high
sampling frequency, and lossless audio playback. Maximum 7.1-channels
are supported in Blu-ray Disc.
Front panel
Display
Rear panel
DTS:X produces a hemisphere of audio, where flyovers as well as ambient
backgrounds become truly enveloping. DTS:X objects enable audio to
move smoothly from one speaker to any other creating life-like realism.
DTS Neural:X
Enables an immersive audio experience for older content. DTS Neural:X
can upmix your stereo, 5.1 or 7.1 content to take full advantage of all
speakers in your surround sound system.
351
Remote
Index
Contents
Connections
Playback
Settings
o Audio
This is a codec for lossless audio compression method developed by
Apple Inc. This codec can be played back on iTunes, iPod or iPhone. Data
compressed to approximately 60 – 70 % can be decompressed to exactly
the same original data.
FLAC (Free Lossless Audio Codec)
FLAC stands for Free lossless Audio Codec, and is a lossless free audio
file format. Lossless means that the audio is compressed without any loss
in quality.
The FLAC license is as shown below.
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
2009 Josh Coalson
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
Display
Rear panel
Appendix
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
ALAC (Apple Lossless Audio Codec)
Front panel
Tips
LFE
This is an abbreviation of Low Frequency Effect, which is an output
channel that emphasizes low frequency effect sound. Surround audio is
intensified by outputting 20 Hz to 120 Hz deep bass to the system
subwoofer(s).
MP3 (MPEG Audio Layer-3)
This is an internationally standardized audio data compression scheme,
using the “MPEG-1” video compression standard. It compresses the data
volume to about one eleventh its original size while maintaining sound
quality equivalent to a music CD.
352
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4
Speaker impedance
These are the names for digital compression format standards used for
the encoding of video and audio. Video standards include “MPEG-1
Video”, “MPEG-2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio
standards include “MPEG-1 Audio”, “MPEG-2 Audio”, “MPEG-4 AAC”.
This is an AC resistance value, indicated in Ω (ohms).
Greater power can be obtained when this value is smaller.
Dialog normalization function
This function operates automatically during playback of Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS or DTS-HD sources.
It automatically corrects the standard signal level for individual program
sources.
WMA (Windows Media Audio)
This is audio compression technology developed by Microsoft
Corporation.
WMA data can be encoded using Windows Media® Player.
To encode WMA files, only use applications authorized by Microsoft
Corporation. If you use an unauthorized application, the file may not work
properly.
Dynamic range
The difference between the maximum undistorted sound level and the
minimum discernible level above the noise emitted by the device.
Downmix
Sampling frequency
This function converts the number of channels of surround audio to a
lower number of channels and plays back according to the system’s
configuration.
Sampling involves taking a reading of a sound wave (analog signal) at
regular intervals and expressing the height of the wave at each reading in
digitized format (producing a digital signal).
The number of readings taken in one second is called the “sampling
frequency”. The larger the value, the closer the reproduced sound is to the
original.
Front panel
Display
Rear panel
353
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Video
o Network
ISF
AirPlay
ISF (Imaging Science Foundation) is an organization that certifies video
technicians who are then qualified to carry out calibration and adjustment
to match the installation conditions. It also sets quality standards for the
optimization of device video performance.
AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod
touch/iPad to a compatible device via the network.
DLNA
DLNA and DLNA CERTIFIED are trademarks and/or service marks of
Digital Living Network Alliance. Some contents may not be compatible
with other DLNA CERTIFIED® products.
Progressive (sequential scanning)
This is a scanning system of the video signal that displays 1 frame of video
as one image. Compared to the interlace system, this system provides
images with less flickering and jagged edges.
Front panel
Display
Rear panel
vTuner
This is a free online content server for Internet Radio.
For inquiries about this service, visit the vTuner site below.
vTuner website:
http://www.radiomarantz.com
This product is protected by certain intellectual property rights of Nothing
Else Matters Software and BridgeCo. Use or distribution of such
technology outside of this product is prohibited without a license from
Nothing Else Matters Software and BridgeCo or an authorized subsidiary.
354
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
WEP Key (network key)
WPA-PSK/WPA2-PSK (Pre-shared Key)
This is key information used for encrypting data when conducting data
transfer. On this unit, the same WEP key is used for data encryption and
decryption, so the same WEP key must be set on both devices in order for
communications to be established between them.
This is a simple authentication system for mutual authentication when a
preset character string matches on the wireless LAN access point and
client.
Wi-Fi®
This is a standard drawn up by the Wi-Fi Alliance to ease the task of
setting up wireless LAN connections and configuring security.
WPS (Wi-Fi Protected Setup)
Wi-Fi Certification assures tested and proven interoperability by the Wi-Fi
Alliance, a group certifying interoperability among wireless LAN devices.
Network Names (SSID: Service Set Identifier)
WPA (Wi-Fi Protected Access)
When forming wireless LAN networks, groups are formed to prevent
interference, data theft, etc. These groups are based on “SSID (network
names)”. For enhanced security, a WEP key is set so that communication
is unavailable unless both the “SSID” and the WEP key match. This is
suitable for constructing a simplified network.
This is a security standard established by the Wi-Fi Alliance. In addition to
the conventional SSID (network name) and WEP key (network key), it also
uses a user identification function and encrypting protocol for stronger
security.
WPA2 (Wi-Fi Protected Access 2)
This is a new version of the WPA established by the Wi-Fi Alliance,
compatible with more secure AES encryption.
Front panel
Display
Rear panel
355
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Others
HDCP
When transmitting digital signals between devices, this copyright
protection technology encrypts the signals to prevent content from being
copied without authorization.
MAIN ZONE
The room where this unit is placed is called the MAIN ZONE.
Pairing
Pairing (registration) is an operation that is required in order to connect a
Bluetooth device to this unit using Bluetooth. When paired, the devices
authenticate each other and can connect without mistaken connections
occurring.
When using Bluetooth connection for the first time, you need to pair this
unit and the Bluetooth device to be connected.
Protection circuit
This is a function to prevent damage to devices within the power supply
when an abnormality such as an overload, excess voltage occurs or over
temperature for any reason.
Front panel
Display
Rear panel
356
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Trademark information
.
.
Manufactured under license from Audyssey Laboratories™. U.S. and
foreign patents pending. Audyssey MultEQ® XT32, Audyssey Dynamic
EQ®, Audyssey Dynamic Volume®, Audyssey DSX® and Audyssey
LFC™ are registered trademarks of Audyssey Laboratories.
.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory
has been designed to connect specifically to iPod, or iPhone,
respectively, and has been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use of this
accessory with iPod, or iPhone, may affect wireless performance.
AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle and
iPod touch are trademarks of Apple Inc., registered in the U.S. and other
countries.
0 Individual users are permitted to use iPhone, iPod, iPod classic, iPod
nano, iPod shuffle, and iPod touch for private copy and playback of
non-copyrighted contents and contents whose copy and playback is
permitted by law. Copyright infringement is prohibited by law.
.
The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc.
is under license. Other trademarks and trade names are those of their
respective owners.
Manufactured under license from Dolby Laboratories. Dolby, Dolby
Atmos, Dolby Audio, Dolby Digital Plus, Pro Logic, and the double-D
symbol are trademarks of Dolby Laboratories.
Front panel
Display
Rear panel
357
Remote
Index
Connections
Playback
Settings
Tips
Appendix
.
Contents
For DTS patents, see http://patents.dts.com. Manufactured under license
from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol,
DTS:X, and the DTSX logo are registered trademarks or trademarks of
DTS, Inc. in the United States and/or other countries. © DTS, Inc. All
Rights Reserved.
.
.
The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi
Alliance.
Wi-Fi Certification provides assurance that the device has passed the
interoperability test conducted by the Wi-Fi Alliance, a group that certifies
interoperability among wireless LAN devices.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
This item incorporates copy protection technology that is protected by
U.S. patents and other intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.
Front panel
Display
Rear panel
358
Remote
Index
Contents
Connections
Playback
Settings
Tips
.
Upgrade (Auro-3D)
Manufactured under license from Auro Technologies.
Auro-3D® and the related symbols are registered trademarks of Auro
Technologies. All materials contained in this work are protected by
copyright law and may not be reproduced, distributed, transmitted,
displayed, published or broadcast without the prior written permission of
Auro Technologies NV or in case of third party materials, the owner of
that content. You may not alter or remove any trademark, copyright or
other notice from copies of the content.
Auro Technologies: mail info@auro-technologies.com,
phone +32-(0)-14314343, fax +32-(0)-14321224, www.aurotechnologies.com
Front panel
Display
Rear panel
359
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Specifications
o Audio section
0 Power amplifier
Rated output:
Front:
125 W + 125 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
165 W + 165 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
125 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
165 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
125 W + 125 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
165 W + 165 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround back / Height1 / Front wide/Height2:
125 W + 125 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
165 W + 165 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Output connectors:
Front panel
4 – 16 Ω/ohms
Display
Rear panel
360
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
0 Analog
Input sensitivity/Input impedance:
200 mV/47 kΩ/kohms
Frequency response:
10 Hz – 100 kHz — +1, –3 dB (Direct mode)
S/N:
100 dB (IHF–A weighted, Direct mode)
Distortion:
0.005 % (20 Hz – 20 kHz) (Direct mode)
Rated output:
1.2 V
0 Digital
D/A output:
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input:
Format — Digital audio interface
0 Phono equalizer
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
S/N:
74 dB (IHF-A)
Distortion factor:
0.03 % (1 kHz, 3 V)
Front panel
Display
Rear panel
361
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
o Video section
0 Standard video connectors
Input/output level and impedance:
1 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz – 10 MHz — 0, –3 dB
0 Color component video connector
Input/output level and impedance:
Y signal — 1 Vp-p, 75 Ω/ohms
PB / CB signal — 0.7 Vp-p, 75 Ω/ohms
PR / CR signal — 0.7 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz – 60 MHz — 0, –3 dB
o Tuner section
[FM]
[AM]
(Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10 –15 W)
Reception frequency range:
87.5 MHz – 107.9 MHz
530 kHz – 1710 kHz
Effective sensitivity:
1.5 μV (14.8 dBf)
20 μV
S/N ratio (IHF-A):
Mono: 78 dB
Stereo: 68 dB
HD: 85 dB
85 dB
Distortion (1 kHz):
MONO ― 0.1 %
STEREO ― 0.2 %
HD: 0.02 %
0.02 %
Front panel
Display
Rear panel
362
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
o Wireless LAN section
Network type (wireless LAN standard):
Security:
Conforming to IEEE 802.11b
Conforming to IEEE 802.11g
Conforming to IEEE 802.11n
(Wi-Fi® compliant)z1
WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency:
2.4 GHz
No. of channels:
1 – 11 ch
z1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
Front panel
Display
Rear panel
363
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
o Bluetooth section
Communications system:
Bluetooth Version 2.1 + EDR (Enhanced Data Rate)
Transmission power:
Maximum 2.5 mW (Class 2)
Maximum communication range:
Approx. 32.8 ft/10 m in line of sightz2
Frequency band:
2.4 GHz band
Modulation scheme:
FHSS (Frequency-Hopping Spread Spectrum)
Supported profiles:
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio Video Remote Control Profile) 1.4
Corresponding codec:
SBC, AAC
Transmission range (A2DP):
20 Hz - 20,000 Hz
z2 The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from
microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.
o General
Power supply:
AC 120 V, 60 Hz
Power consumption:
710 W
Power consumption in standby mode:
0.2 W
Power consumption in CEC standby
mode:
0.5 W
Power consumption in network standby
mode:
2.7 W
For purposes of improvement, specifications and design are subject to change without notice.
Front panel
Display
Rear panel
364
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
. 2 (50)
o Weight: 30 lbs 7oz (13.8 kg)
Front panel
Display
2 3/8
(60)
13 1/2 (340)
Rear panel
7 3/8 (185)
9 3/4 (247)
5/8
(14)
6 3/4 (171)
17 3/8 (440)
2 (50)
365
Remote
Index
15 7/8 (401)
10 5/8 (267)
7/8
(20)
3/4
(18)
2 1/8
(53)
16 1/4 (411)
14 1/4 (361)
2 1/2
(62)
1 3/8
(32)
o Dimensions (Unit : in. (mm))
Contents
Connections
Index
Playback
Settings
vB
v Numerics
11.1-channel .................................................. 68
3D ................................................................ 328
4K ................................................................ 328
5.1-channel .............................................. 43, 52
7.1-channel .............................................. 42, 53
9.1-channel .............................................. 42, 58
vA
AirPlay .......................................................... 147
All Zone Stereo ............................................ 161
Audio formats ....................... 330, 333, 335, 336
Audio settings ....................................... 198, 204
Audyssey DSX® .......................................... 347
Audyssey Dynamic EQ® ............................. 347
Audyssey Dynamic Volume® ...................... 348
Audyssey MultEQ® XT32 ............................ 348
Audyssey settings ................................ 212, 240
Tips
vF
Bi-amp ............................................................ 74
Favorites .............................................. 153, 154
Bluetooth device .......................................... 114
Firmware Update .......................................... 287
Blu-ray Disc player ................................. 89, 104
Front panel ..................................................... 18
vC
vG
Cable TV ........................................................ 88
Game console ................................................ 90
General settings ................................... 200, 279
vD
Direct sound mode ....................................... 171
vH
Display ........................................................... 23
HD Radio ................................................ 95, 118
DLNA ........................................................... 354
HDCP ........................................................... 330
Dolby Atmos ................................................. 349
HDMI Control ....................................... 177, 223
Dolby sound mode ............................... 166, 349
DTS sound mode ................................. 167, 350
DVD player ............................................. 89, 104
vE
ECO Mode ................................................... 279
External control device ................................... 99
Audyssey® Setup ........................................ 238
Auto sound mode ......................................... 170
Auto Standby ............................................... 281
Front panel
Display
Appendix
Rear panel
366
Remote
Index
Contents
Connections
vI
Playback
Settings
vN
Tips
Appendix
vS
Input Assign ................................................. 233
NAS ............................................................. 133
Satellite tuner ................................................. 88
Input settings ........................................ 199, 233
Network settings .......................................... 270
Set-top box ..................................................... 88
Input signal ................................................... 343
Input source ................................................. 103
Inputting characters ...................................... 202
Internet Radio ............................................... 129
iPod ........................................................ 93, 105
iPod Browse Mode ....................................... 107
vJ
Setup Assistant ............................................ 200
vO
Original sound mode .................................... 170
vL
Pairing .................................................. 114, 116
Pandora® .................................................... 137
PCM multi-channel sound mode .................. 169
Protection circuit .......................................... 356
Pure direct .................................................... 164
Listening position ......................................... 238
vM
Sleep timer ................................................... 180
Slideshow .................................................... 155
vP
PC ................................................................ 133
JPEG .................................................... 110, 133
SiriusXM ....................................................... 144
Smart select ................................................. 182
Sound mode ................................. 163, 337, 339
Speaker connection ....................................... 36
Speaker settings .................................. 199, 238
Spotify .......................................................... 150
Stereo sound mode ...................................... 171
vR
Random playback ................................ 109, 152
M-DAX ......................................................... 210
Rear panel ...................................................... 27
Menu map .................................................... 198
Remote control unit ........................................ 31
Muting .......................................................... 104
Repeat playback .................................. 109, 152
Resetting factory settings ............................. 327
Front panel
Display
Rear panel
367
Remote
Index
Contents
Connections
vT
Playback
Settings
Tips
vW
Text Search .................................................. 154
Web control .................................................. 185
Tips .............................................................. 307
Wi-Fi settings ............................................... 271
Troubleshooting ........................................... 309
Wired LAN .............................................. 97, 271
TV ....................................................... 84, 85, 86
vU
vZ
ZONE2/ZONE3 ...................................... 78, 191
USB memory device .............................. 93, 110
vV
Video camcorder ............................................ 90
Video Conversion ................................. 228, 331
Video Select ................................................. 159
Video settings ....................................... 198, 219
Volume ................................................. 104, 157
Front panel
Display
Rear panel
368
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
License
This section describes software license used for this unit.
To maintain the correct content, the original (English) is used.
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the “Software”), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit
persons to whom the Software is furnished to do so, subject to the following
conditions:
The above copyright notice and this permission notice shall be included in all copies
or substantial portions of the Software.
o Boost
http://www.boost.org/
Boost Software License – Version 1.0 – August 17th, 2003
Permission is hereby granted, free of charge, to any person or organization obtaining
a copy of the software and accompanying documentation covered by this license
(the “Software”) to use, reproduce, display, distribute, execute, and transmit the
Software, and to prepare derivative works of the Software, and to permit third-parties
to whom the Software is furnished to do so, all subject to the following:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
The copyright notices in the Software and this entire statement, including the above
license grant, this restriction and the following disclaimer, must be included in all
copies of the Software, in whole or in part, and all derivative works of the Software,
unless such copies or derivative works are solely in the form of machine-executable
object code generated by a source language processor.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND
NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR
OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
o FastDelegate
http://www.codeproject.com/KB/cpp/FastDelegate.aspx
THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS
CODE PROJECT OPEN LICENSE (“LICENSE”). THE WORK IS PROTECTED BY
COPYRIGHT AND/OR OTHER APPLICABLE LAW. ANY USE OF THE WORK
OTHER THAN AS AUTHORIZED UNDER THIS LICENSE OR COPYRIGHT LAW IS
PROHIBITED.
o Expat
BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HEREIN, YOU
ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS LICENSE. THE
AUTHOR GRANTS YOU THE RIGHTS CONTAINED HEREIN IN CONSIDERATION
OF YOUR ACCEPTANCE OF SUCH TERMS AND CONDITIONS. IF YOU DO NOT
AGREE TO ACCEPT AND BE BOUND BY THE TERMS OF THIS LICENSE, YOU
CANNOT MAKE ANY USE OF THE WORK.
http://www.jclark.com/xml/expat.html
Expat License. Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center
Ltd
Front panel
Display
Rear panel
369
Remote
Index
Contents
Connections
Playback
Settings
Definitions. “Articles” means, collectively, all articles written by Author which
describes how the Source Code and Executable Files for the Work may be used by a
user.
“Author” means the individual or entity that offers the Work under the terms of this
License.
“Derivative Work” means a work based upon the Work or upon the Work and other
pre-existing works.
“Executable Files” refer to the executables, binary files, configuration and any
required data files included in the Work.
“Publisher” means the provider of the website, magazine, CD-ROM, DVD or other
medium from or by which the Work is obtained by You.
“Source Code” refers to the collection of source code and configuration files used to
create the Executable Files.
“Standard Version” refers to such a Work if it has not been modified, or has been
modified in accordance with the consent of the Author, such consent being in the full
discretion of the Author.
“Work” refers to the collection of files distributed by the Publisher, including the
Source Code, Executable Files, binaries, data files, documentation, whitepapers and
the Articles.
“You” is you, an individual or entity wishing to use the Work and exercise your rights
under this License.
Display
Rear panel
Appendix
You may otherwise modify Your copy of this Work (excluding the Articles) in any way
to create a Derivative Work, provided that You insert a prominent notice in each
changed file stating how, when and where You changed that file.
You may distribute the standard version of the Executable Files and Source Code or
Derivative Work in aggregate with other (possibly commercial) programs as part of a
larger (possibly commercial) software distribution.
The Articles discussing the Work published in any form by the author may not be
distributed or republished without the Author’s consent. The author retains copyright
to any such Articles. You may use the Executable Files and Source Code pursuant to
this License but you may not repost or republish or otherwise distribute or make
available the Articles, without the prior written consent of the Author.
Any subroutines or modules supplied by You and linked into the Source Code or
Executable Files this Work shall not be considered part of this Work and will not be
subject to the terms of this License.
Patent License. Subject to the terms and conditions of this License, each Author
hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free,
irrevocable (except as stated in this section) patent license to make, have made, use,
import, and otherwise transfer the Work.
Restrictions. The license granted in Section 3 above is expressly made subject to
and limited by the following restrictions: You agree not to remove any of the original
copyright, patent, trademark, and attribution notices and associated disclaimers that
may appear in the Source Code or Executable Files.
You agree not to advertise or in any way imply that this Work is a product of Your
own.
The name of the Author may not be used to endorse or promote products derived
from the Work without the prior written consent of the Author.
You agree not to sell, lease, or rent any part of the Work. This does not restrict you
from including the Work or any part of the Work inside a larger software distribution
that itself is being sold. The Work by itself, though, cannot be sold, leased or rented.
Fair Use/Fair Use Rights. Nothing in this License is intended to reduce, limit, or
restrict any rights arising from fair use, fair dealing, first sale or other limitations on the
exclusive rights of the copyright owner under copyright law or other applicable laws.
License Grant. Subject to the terms and conditions of this License, the Author hereby
grants You a worldwide, royalty-free, non-exclusive, perpetual (for the duration of the
applicable copyright) license to exercise the rights in the Work as stated below: You
may use the standard version of the Source Code or Executable Files in Your own
applications.
You may apply bug fixes, portability fixes and other modifications obtained from the
Public Domain or from the Author. A Work modified in such a way shall still be
considered the standard version and will be subject to this License.
Front panel
Tips
370
Remote
Index
Contents
Connections
Playback
Settings
You may distribute the Executable Files and Source Code only under the terms of
this License, and You must include a copy of, or the Uniform Resource Identifier for,
this License with every copy of the Executable Files or Source Code You distribute
and ensure that anyone receiving such Executable Files and Source Code agrees
that the terms of this License apply to such Executable Files and/or Source Code.
You may not offer or impose any terms on the Work that alter or restrict the terms of
this License or the recipients’ exercise of the rights granted hereunder. You may not
sublicense the Work. You must keep intact all notices that refer to this License and to
the disclaimer of warranties. You may not distribute the Executable Files or Source
Code with any technological measures that control access or use of the Work in a
manner inconsistent with the terms of this License.
You agree not to use the Work for illegal, immoral or improper purposes, or on pages
containing illegal, immoral or improper material. The Work is subject to applicable
export laws. You agree to comply with all such laws and regulations that may apply to
the Work after Your receipt of the Work.
Display
Rear panel
Appendix
This License and the rights granted hereunder will terminate automatically upon any
breach by You of any term of this License. Individuals or entities who have received
Derivative Works from You under this License, however, will not have their licenses
terminated provided such individuals or entities remain in full compliance with those
licenses. Sections 1, 2, 6, 7, 8, 9, 10 and 11 will survive any termination of this
License.
If You bring a copyright, trademark, patent or any other infringement claim against
any contributor over infringements You claim are made by the Work, your License
from such contributor to the Work ends automatically.
Subject to the above terms and conditions, this License is perpetual (for the duration
of the applicable copyright in the Work). Notwithstanding the above, the Author
reserves the right to release the Work under different license terms or to stop
distributing the Work at any time; provided, however that any such election will not
serve to withdraw this License (or any other license that has been, or is required to
be, granted under the terms of this License), and this License will continue in full
force and effect unless terminated as stated above.
Representations, Warranties and Disclaimer. THIS WORK IS PROVIDED “AS IS”,
“WHERE IS” AND “AS AVAILABLE”, WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES OR CONDITIONS OR GUARANTEES. YOU, THE USER, ASSUME
ALL RISK IN ITS USE, INCLUDING COPYRIGHT INFRINGEMENT, PATENT
INFRINGEMENT, SUITABILITY, ETC. AUTHOR EXPRESSLY DISCLAIMS ALL
EXPRESS, IMPLIED OR STATUTORY WARRANTIES OR CONDITIONS,
INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, MERCHANTABLE QUALITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR ANY WARRANTY OF TITLE OR NONINFRINGEMENT, OR THAT THE WORK (OR ANY PORTION THEREOF) IS
CORRECT, USEFUL, BUG-FREE OR FREE OF VIRUSES. YOU MUST PASS THIS
DISCLAIMER ON WHENEVER YOU DISTRIBUTE THE WORK OR DERIVATIVE
WORKS.
Indemnity. You agree to defend, indemnify and hold harmless the Author and the
Publisher from and against any claims, suits, losses, damages, liabilities, costs, and
expenses (including reasonable legal or attorneys’ fees) resulting from or relating to
any use of the Work by You.
Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE
LAW, IN NO EVENT WILL THE AUTHOR OR THE PUBLISHER BE LIABLE TO YOU
ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL,
PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE
USE OF THE WORK OR OTHERWISE, EVEN IF THE AUTHOR OR THE
PUBLISHER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Termination.
Front panel
Tips
Publisher. The parties hereby confirm that the Publisher shall not, under any
circumstances, be responsible for and shall not have any liability in respect of the
subject matter of this License. The Publisher makes no warranty whatsoever in
connection with the Work and shall not be liable to You or any party on any legal
theory for any damages whatsoever, including without limitation any general, special,
incidental or consequential damages arising in connection to this license. The
Publisher reserves the right to cease making the Work available to You at any time
without notice
Miscellaneous
This License shall be governed by the laws of the location of the head office of the
Author or if the Author is an individual, the laws of location of the principal place of
residence of the Author.
If any provision of this License is invalid or unenforceable under applicable law, it
shall not affect the validity or enforceability of the remainder of the terms of this
License, and without further action by the parties to this License, such provision shall
be reformed to the minimum extent necessary to make such provision valid and
enforceable.
371
Remote
Index
Contents
Connections
Playback
Settings
http://www.xiph.org/vorbis/
Copyright (c) 2002-2004 Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
o libogg
http://www.xiph.org/ogg/
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Display
Rear panel
Appendix
o libvorbis
No term or provision of this License shall be deemed waived and no breach
consented to unless such waiver or consent shall be in writing and signed by the
party to be charged with such waiver or consent.
This License constitutes the entire agreement between the parties with respect to the
Work licensed herein. There are no understandings, agreements or representations
with respect to the Work not specified herein. The Author shall not be bound by any
additional provisions that may appear in any communication from You. This License
may not be modified without the mutual written agreement of the Author and You
Front panel
Tips
o Tremolo
http://wss.co.uk/pinknoise/tremolo
Copyright (C) 2002 – 2009 Xiph.org Foundation Changes Copyright (C) 2009 – 2010
Robin Watts for Pinknoise Productions Ltd
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
372
Remote
Index
Contents
Connections
Playback
Settings
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
o Mersenne Twister
http://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/MT2002/CODES/mt19937ar.c
Copyright (C) 1997 – 2002, Makoto Matsumoto and Takuji Nishimura,
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
The names of its contributors may not be used to endorse or promote products
derived from this software without specific prior written permission.
o Tremor
http://wiki.xiph.org/index.php/Tremor
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
Display
Rear panel
Appendix
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Front panel
Tips
373
Remote
Index
Contents
Connections
Playback
Settings
http://curl.haxx.se
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 – 2011, Daniel Stenberg, <daniel@haxx.se>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with or
without fee is hereby granted, provided that the above copyright notice and this
permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
o zlib
http://www.zlib.net/
zlib.h -- interface of the “zlib” general purpose compression library version 1.2.3, July
18th, 2005
Except as contained in this notice, the name of a copyright holder shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Software
without prior written authorization of the copyright holder.
Copyright (C) 1995 – 2004 Jean-loup Gailly and Mark Adler
This software is provided “as-is”, without any express or implied warranty. In no event
will the authors be held liable for any damages arising from the use of this software.
o c-ares
Permission is granted to anyone to use this software for any purpose, including
commercial applications, and to alter it and redistribute it freely, subject to the
following restrictions:
http://c-ares.haxx.se
Copyright 1998 by the Massachusetts Institute of Technology.
The origin of this software must not be misrepresented; you must not claim that you
wrote the original software. If you use this software in a product, an acknowledgment
in the product documentation would be appreciated but is not required.
Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
This notice may not be removed or altered from any source distribution.
Permission to use, copy, modify, and distribute this software and its documentation
for any purpose and without fee is hereby granted, provided that the above copyright
notice appear in all copies and that both that copyright notice and this permission
notice appear in supporting documentation, and that the name of M.I.T. not be used
in advertising or publicity pertaining to distribution of the software without specific,
written prior permission. M.I.T. makes no representations about the suitability of this
software for any purpose. It is provided “as is” without express or implied warranty.
Jean-loup Gailly jloup@gzip.org, Mark Adler madler@alumni.caltech.edu
Display
Rear panel
Appendix
o cURL
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Front panel
Tips
374
Remote
Index
Contents
Connections
Playback
Settings
Tips
o License information for the software used in
the unit
About GPL (GNU-General Public License), LGPL (GNU Lesser
General Public License) License
This product uses GPL/LGPL software and software made by other
companies.
After you purchase this product, you may procure, modify or distribute
the source code of the GPL/LGPL software that is used in the product.
Marantz provides the source code based on the GPL and LPGL
licenses at the actual cost upon your request to our customer service
center.
However, note that we make no guarantees concerning the source
code.
Please also understand that we do not offer support for the contents of
the source code.
Front panel
Display
Rear panel
375
Remote
Index
Appendix
.
3520 10421 00AMA
Copyright © 2015 D&M Holdings Inc. All Rights Reserved.
376
Download PDF
Similar pages