ATS01N109FT
Product data sheet
Characteristics
soft starter for asynchronous motor - ATS01 - 9 A
- 110..480V - 1.1..4 KW
Range of product
Altistart 01
Product or component type
Soft starter
Product destination
Asynchronous motors
Product specific application
Simple machine
Device short name
ATS01
Network number of phases
1 phase
[Us] rated supply voltage
110...480 V - 10...10 %
Motor power kW
4 kW 3 phases 400 V
1.5 kW 3 phases 230 V
1.1 kW 1 phase 230 V
Motor power hp
1 hp 3 phases 210 V
2 hp 3 phases 230 V
5 hp 3 phases 460 V
IcL starter rating
9A
Utilisation category
AC-53B EN/IEC 60947-4-2
Current consumption
45 A at nominal load
Type of start
Start with voltage ramp
Power dissipation in W
1 W at full load and at end of starting
46 W in transient state
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Main
Complementary
Assembly style
With heat sink
Function available
Integrated bypass
Supply voltage limits
99...528 V
Supply frequency
50...60 Hz - 5...5 %
Network frequency
47.5...63 Hz
Output voltage
<= power supply voltage
[Uc] control circuit voltage
24 V AC/DC +/- 10 % 30 mA
110 V AC +/- 10 % 35 mA
240 V AC +/- 10 % 80 mA
Starting time
1 s 100
5 s 20
Adjustable from 1 to 5 s
Starting torque
30...80 % of starting torque of motor connected directly on the line supply
Feb 20, 2018
1
Discrete output current
2 A DC-13
3 A AC-15
Tightening torque
0.5 N.m
1.9...2.5 N.m
Electrical connection
4 mm screw clamp terminal rigid 1 1...10 mm² AWG 8 power circuit
Screw connector rigid 1 0.5...2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal rigid 2 1...6 mm² AWG 10 power circuit
Screw connector rigid 2 0.5...1 mm² AWG 17 control circuit
Screw connector flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
Screw connector flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal flexible with cable end 2 1...6 mm² AWG 10 power circuit
4 mm screw clamp terminal flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
Screw connector flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
Marking
CE
Operating position
Vertical +/- 10 degree
Height
124 mm
Width
45 mm
Depth
131 mm
Product weight
0.28 kg
Compatibility code
ATS01N1
Power range
2.2...3 kW at 200...240 V 3 phases
4...6 kW at 380...440 V 3 phases
1.1...2 kW at 200...240 V 1 phase
Motor starter type
Soft starter
Environment
Electromagnetic compatibility
Damped oscillating waves level 3 IEC 61000-4-12
Electrostatic discharge level 3 IEC 61000-4-2
Immunity to electrical transients level 4 IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3
Voltage/Current impulse level 3 IEC 61000-4-5
Conducted and radiated emissions level B CISPR 11
Conducted and radiated emissions level B IEC 60947-4-2
EMC immunity EN 50082-2
Harmonics IEC 1000-3-2
Harmonics IEC 1000-3-4
Immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6
Micro-cuts and voltage fluctuation IEC 61000-4-11
EMC immunity EN 50082-1
Standards
EN/IEC 60947-4-2
Product certifications
B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
CCC
CSA
C-Tick
GOST
UL
IP degree of protection
IP20
Pollution degree
2 EN/IEC 60947-4-2
Vibration resistance
1.5 mm peak to peak 3...13 Hz EN/IEC 60068-2-6
1 gn 13...150 Hz EN/IEC 60068-2-6
Shock resistance
15 gn 11 ms EN/IEC 60068-2-27
Relative humidity
5...95 % without condensation or dripping water EN/IEC 60068-2-3
Ambient air temperature for operation
-10...40 °C without derating
40...50 °C with current derating of 2 % per °C
Ambient air temperature for storage
-25...70 °C EN/IEC 60947-4-2
Operating altitude
<= 1000 m without derating
> 1000 m with current derating of 2.2 % per additional 100 m
Contractual warranty
Warranty period
2
18 months
Product data sheet
Dimensions Drawings
ATS01N109FT
Dimensions
Mounting on Symetrical (35 mm) Rail
Screw Fixing
(1)
Retractable fixings
3
Product data sheet
Connections and Schema
ATS01N109FT
Example of 3-phase Power Supply Connection
(1)
A1 :
Q1 :
KM1 :
F1, F2 :
S1, S2 :
4
A line contactor must be used in the sequence.
Soft starter
Motor circuit-breaker
Contactors
Control protection fuses
Pushbuttons
Product data sheet
Technical Description
ATS01N109FT
Function Diagram
Us :
Uc :
LED 1 :
LED 2 :
Um :
Power supply voltage
Control supply voltage
Green LED
Yellow LED
Motor voltage
5
Download PDF
Similar pages