ABL8MEM05040
Product data sheet
Characteristics
regulated SMPS - 1 or 2-phase - 100..240 V AC 5V-4A
Product availability : Stock - Normally stocked in distribution facility
Main
Range of product
Phaseo
Product or component type
Power supply
Power supply type
Regulated switch mode
Input voltage
100...240 V AC phase to phase, terminal(s): L1-L2
100...240 V AC single phase, terminal(s): N-L1
120...250 V DC
Output voltage
5 V DC
Rated power in W
20 W
Input protection type
Integrated fuse (not interchangeable)
Power supply output current
4A
Output protection type
Against short-circuits
Ambient air temperature for operation
-13...131 °F (-25...55 °C) without
55...70 °C with
Complementary
Input voltage limits
85...264 V
Network frequency
47...63 Hz
Inrush current
<= 20 A
Cos phi
> 0.5
Efficiency
75 %
Output voltage limits
4.75...6.25 V adjustable
Power dissipation in W
6.7 W
Current consumption
0.35 A at 240 V
0.55 A at 100 V
Line and load regulation
+/- 3 %
Residual ripple
250 mV
Holding time
>= 10 ms at 100 V
Connections - terminals
Screw type terminals input connection, connection capacity: 2 x 0.14...2 x 2.5 mm² AWG 26...AWG
14
Screw type terminals output connection, connection capacity: 4 x 0.14...4 x 2.5 mm² AWG 26...AWG
14
Marking
CE
Feb 20, 2018
1
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Price* : 128.00 USD
Mounting support
35 x 15 mm symmetrical DIN rail
35 x 7.5 mm symmetrical DIN rail
Panel 2 screws, diameter : 4 mm
Operating position
Vertical
Operating altitude
6561.68 ft (2000 m)
Output coupling
Parallel
Series
Name of test
Harmonic current emission conforming to EN/IEC 61000-3-2
Conducted emissions on the power line conforming to EN 55022 Class B
Electrostatic discharges conforming to EN/IEC 61000-4-2
Emission conforming to EN 50081-1
Induced electromagnetic field conforming to EN/IEC 61000-4-6
Primary outage conforming to IEC 61000-4-11
Radiated electromagnetic field conforming to EN/IEC 61000-4-3
Radiated emissions conforming to EN 55022 Class B
Rapid transient conforming to IEC 61000-4-4
Surge conforming to EN/IEC 61000-4-5
Status LED
1 LED green output voltage
Depth
2.32 in (59 mm)
Height
3.94 in (100 mm)
Width
2.13 in (54 mm)
Product weight
0.43 lb(US) (0.195 kg)
Environment
Product certifications
TUV 60950-1
RCM
EAC
KC
Standards
UL 508
CSA C22.2 No 60950-1
Environmental characteristic
EMC conforming to EN 55022 Class B
EMC conforming to EN 61000-6-3
EMC conforming to EN/IEC 61000-6-2
EMC conforming to EN/IEC 61204-3
Safety conforming to EN/IEC 60950-1
Safety conforming to SELV
IP degree of protection
IP20 conforming to EN/IEC 60529
Ambient air temperature for storage
-40...158 °F (-40...70 °C)
Relative humidity
0...90 % during operation
0...95 % in storage
Overvoltage category
Class II conforming to VDE 0106-1
Dielectric strength
Between input and output
Ordering and shipping details
Category
22525 - ABL8 AND ABL7 POWER SUPPLIE
Discount Schedule
CP12
GTIN
00785901670360
Nbr. of units in pkg.
1
Package weight(Lbs)
0.51000000000000001
Returnability
Y
Country of origin
CN
Contractual warranty
Warranty period
2
18 months
ABL8MEM05040
Product data sheet
Dimensions Drawings
Regulated Switch Mode Power Supplies
Dimensions
a in mm
a in in.
a1 in mm
a1 in in.
ABL8MEM05040
54
2.12
42
1.65
ABL8MEM12020
54
2.12
42
1.65
ABL8MEM24003
36
1.41
24
0.94
ABL8MEM24006
36
1.41
24
0.94
ABL8MEM24012
54
2.12
42
1.65
ABL7RM24025
74
2.91
60
2.36
3
Product data sheet
Connections and Schema
Regulated Switch Mode Power Supply
Internal Wiring Diagram
4
ABL8MEM05040
ABL8MEM05040
Product data sheet
Connections and Schema
Regulated Switch Mode Power Supplies
Series or Parallel Connection
Series Connection
(1)
Two Shottky diodes Imin = power supply In and Vmin = 50 V
Parallel Connection
Family
Series
Parallel
ABL 7RM/8MEM
2 products max.
2 products max.
Series or parallel connection is only recommended for products with identical references.
5
Product data sheet
Performance Curves
ABL8MEM05040
Regulated Switch Mode Power Supplies
Derating
The ambient temperature is a determining factor that limits the power an electronic power supply can deliver continuously. If the temperature
around the electronic components is too high, their life will be significantly reduced.
The nominal ambient temperature for the Modular range of Phaseo power supplies is 55°C. Above this temperature, derating is necessary up to a
maximum temperature of 70°C (except for the ABL7RM24025 model).
The graph below shows the power as a percentage of the nominal power that the power supply can deliver continuously, depending on the
ambient temperature.
X
(1)
(2)
Maximum operating temperature (°C)
With an ABL7RM24025
With an ABL8MEM•••••
6
Download PDF
Similar pages