LED Area Light Spec Sheet UL 1598/a UL 844

Dialight® LED Area Light
Technical Specification Sheet - UL
Area Light | Products
Vigilant® LED Area Light
100-277 VAC, 120-250 VDC
Mechanical Information:
Fixture weight:
10 lbs (4.5 kg) - Polycarbonate lens
12 lbs (5.5 kg) - Tempered glass lens
Wall mount models:
15 lbs (6.8 kg) - Polycarbonate lens
18 lbs (8.2 kg) - Tempered glass lens
45° wall mount models:
14 lbs (6.4 kg) - Polycarbonate lens
17 lbs (7.8 kg) - Tempered glass lens
45° stanchion mount:
15 lbs (6.7 kg) - Polycarbonate lens
18 lbs (8.1 kg) - Tempered glass lens
34mm conveyor mount:
15 lbs (6.7 kg) - Polycarbonate lens
18 lbs (8.1 kg) - Tempered glass lens
Shipping weight:
Add 2 lbs (0.91kg) to weights above
Impact rating:
IK10 - Polycarbonate lens
IK07 - Tempered glass lens
Vibration resistance:
Tested per IEC 60068-2-6
Electrical Specifications:
Certifications & Ratings*
Operating voltage: 100-277 VAC 50/60Hz, 120-250 VDC
• 10 year warranty
• UL 1598/A
• CSA 22.2 #250.0
Operating temperature: -40°F to +149°F (-40°C to +65°C)
EMC: FCC Title 47, Subpart B, Section 15, Class A device CISPR-15
RF Immunity 20V/m 80MHz-1GHz.
Transient protection: 6 kV, 2 Ohm line-line and line-ground
Harmonics: IEC 61000-3-2, Class C
THD:
< 20%
Power factor: > 0.9
• IP66 / 67 / 69
• NEMA 4X
*ETL listed
Tempered Glass Lens
Construction:
Housing: Copper free aluminum
Finish: Superior dual coat finish
- Sealed polyester topcoat
- Chemical-resistant epoxy primer
Corrosion resistance: 1
Lens : Polycarbonate Lens
3,000-hour salt spray per ASTM B117
Hard-coated polycarbonate
Tempered glass
Photometric Information:
CRI:80
CCT:
5000K (cool white)
4000K (neutral white)
2700K (warm white)
Optics:
360°
180° forward throw for 45° mounting
Wide for 0° mounting
All values typical unless otherwise stated (tolerance +/- 10%)
1
For information on chemical compatibility, please contact your local
Dialight representative or follow this link to reference Dialight’s Chemical
Compatibility Guide:
www.dialight.com/pubs/MDTFCHEMRFLX001.PDF
Dimensions in inches [mm]
2
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Project Information
Part Number:
Project:
Vigilant ® LED Area Light
Fixture Type:
Date:
100-277 VAC, 120-250 VDC
Notes
Specifications
Ordering Information
AL
U
Product
Code
Cert.
2
Lens
Material
Product Code
AL
Area Light
Beam
Dist.
CCT &
CRI
Oper.
Voltage
D
Lumen
Type
CCT & CRI
UL 1598/A CSA 22.2 No. 250.0
5
Polycarbonate - Diffused
7
Glass - Clear
Beam Distribution
Mounting Options
Elect.
Access.
Coatings
Battery
Hardware Accessories
Cool White 5000K - 80 CRI
Retro-fit Adapter
N
Factory Installed Mounting Adapters
N
Neutral White 4000K - 80 CRI
10 ft (3 meter) Power Cable
Warm White 2700K - 80 CRI
Universal Mounting Adapter
(UMA)
W
W
Operating Voltage
2
Lens Material
HW
Access.
N
C
Certification
U
Mounting
Options
Controls
G
100-277 VAC, 120-250 VDC
A
Appleton Mercmaster III
B
Swivel Bracket, Locking 0°- 90°
316 Stainless Steel
C
Crouse-Hinds - Champ
G
GE Filtr-Gard
Electrical Accessories
N
No Option
H
Thomas & Betts Hazlux
3
3,001 - 4,000 Lumens
K
Killark Certilite & Certilite V
4
4,001 - 5,000 Lumens
M
Appleton Mercmaster II
6
5,001 - 6,000 Lumens
P
Holophane Petrolux II, III
7
6,001 - 7,000 Lumens
N
3/4” NPT
9
8,001 - 9,000 Lumens
S
45° Stanchion Mount
U
UMA - Mounting Hub
V
0° Wall Mount
W
45° Wall Mount
Battery
Y
34mm Conveyor Mount
N
Lumen Type
*For lumen output see page 10
A
180°
B
360°
Controls
W
Wide
D
Dimming (0-10V)
Coatings
G
Gray (RAL 7040)
No Option
Notes
1) When ordering Beam Distribution W - Wide: Lumen Type = 7.
2) When ordering Mounting Options “UMA” or “Retro-fit”: Hardware Accessories = N.
3) When ordering Mounting Option U - UMA Mounting Hub HZXW01, HZXW45, HZXS45 or HZXCV34 is required. See page 20 for details.
4) Terminal block options only available when using “UMA” mounting options.
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
3
Area Light | Products
DuroSite® LED Area Light
347-480 VAC, 24-48 VDC, 120-277 VAC Battery Backup
Mechanical Information:
Fixture weight:
Wall mount models:
15 lbs (6.8 kg) - Polycarbonate lens
18 lbs (8.2 kg) - Tempered glass lens
o
45 wall mount models:
14 lbs (6.4 kg) - Polycarbonate lens
17 lbs (7.8 kg) - Tempered glass lens
45o stanchion mount:
15 lbs (6.7 kg) - Polycarbonate lens
18 lbs (8.1 kg) - Tempered glass lens
34mm conveyor mount:
15 lbs (6.7 kg) - Polycarbonate lens
18 lbs (8.1 kg) - Tempered glass lens
Battery backup:
35 lbs (15.9 kg) - Polycarbonate lens
37 lbs (16.8 kg) - Tempered glass lens
Certifications & Ratings*
• 5 year warranty
• UL 1598/A
• CSA 22.2 No. 250.0
• IP66 / 67
• NEMA 4X
Shipping weight:
Add 2 lbs (0.91kg) to weights above
Cabling: 10’ (3.5 m) 5 conductor SOOW
14” (0.4 m) 5 conductor SOOW
Terminal block option available for wall, wall 45° and stanchion 45°
Impact rating:
IK10 - Polycarbonate lens
IK07 - Tempered glass lens
Vibration resistance:
Tested per IEC 60068-2-6
Electrical Specifications:
*ETL listed
Tempered Glass Lens
Polycarbonate Lens
Operating voltage: 347 - 480V
24 - 28V
120 - 277 VAC battery backup
Total system power
consumption: See table on pg. 6
Operating temperature: -40°F to +149°F (-40°C to +65°C)
EMC: FCC Title 47, Subpart B, Section 15, Class A device CISPR-15
RF Immunity 20V/m 80MHz-1GHz.
Transient protection: 6 kV, 2 Ohm line-line and line-ground
Harmonics: IEC 61000-3-2, Class C
THD:
< 20%
Power factor: > 0.9
Construction:
Housing: Copper free aluminum
Finish: Superior dual coat finish
- Sealed polyester topcoat
- Chemical-resistant epoxy primer
Corrosion resistance: 1
Lens : 3,000-hour salt spray per ASTM B117
Hard-coated polycarbonate
Tempered glass
Photometric Information:
Battery Backup
CRI:75
CCT:
5000K (cool white)
4000K (neutral white)
Optics:
360°
180° forward throw for 45° mounting
Wide for 0° mounting
All values typical unless otherwise stated (tolerance +/- 10%)
1
For information on chemical compatibility, please contact your local
Dialight representative or follow this link to reference Dialight’s Chemical
Compatibility Guide:
www.dialight.com/pubs/MDTFCHEMRFLX001.PDF
4
Dimensions in inches [mm]
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Project Information
Part Number:
Project:
DuroSite® LED Area Light
Fixture Type:
Date:
347-480 VAC, 24-48 VDC, 100-277 VAC Battery Backup
Notes
Specifications
Ordering Information
AL
U
Product
Code
Cert.
N
Lens
Material
Product Code
AL
Area Light
Certification
U
Beam
Dist.
CCT &
CRI
Oper.
Voltage
Lumen
Type
5
Polycarbonate - Diffused
2
100 - 277 VAC - Battery Backup
5
347 - 480 VAC
6
24 - 48 VDC
7
Glass - Clear
Beam Distribution
A
180°
B
360°
24-48 VDC
Universal Mounting Adapter
(UMA)
120V Battery
Backup
2 0.1-2K
4 3.1-4K
5 4.1-5K
5 4.1-5K
6 5.1-6K
7 6.1-7K
7 6.1-7K
HW
Access.
Retro-fit Adapter
A
Appleton Mercmaster III
B
Swivel Bracket, Locking 0°- 90°
316 Stainless Steel
C
Crouse-Hinds - Champ
G
GE Filtr-Gard
Lumen Type
480 VAC
Mounting
Options
Controls
Mounting Options
Operating Voltage
UL 1598/A CSA 22.2 No. 250.0
Lens Material
G
7 6.1-7K
H
Thomas & Betts Hazlux
K
Killark Certilite & Certilite V
M
Appleton Mercmaster II
N
3/4” NPT
S
45° Stanchion Mount
Elect.
Access.
N
Factory Installed Mounting Adapters
W
10 ft (3 meter) Power Cable
Electrical Accessories
N
No Option
Coatings
G
Gray (RAL 7040)
U
UMA - Mounting Hub
Amber
V
0° Wall Mount
Battery
W
45° Wall Mount
F
180 min.
Y
34mm Conveyor Mount
N
No Option
B
Cool White 5000K - 70 CRI
Controls
L
Neutral White 4000K - 70 CRI
N
No Options
Notes
Notes - When Ordering Battery Backup Models Use...
1) When using “UMA” or “Retro-fit” mounting options, Hardware Accessories = N.
1) Operating Voltage = 2 120 - 277 VAC
2) Terminal block options only available when using “UMA” mounting options.
3) Not all lumen options available for all voltage options, consult table.
Battery
Hardware Accessories
CCT & CRI
A
Coatings
2) Beam Distribution = A 180° or B 360°
3) Mounting Options = N (stainless steel bracket included)
4) Hardware Accessories = N (junction box included)
5) Electrical Accessories = N (wiring via 3 positions push down terminal block)
6) Battery = F 180 min.
www.dialight.com 7) Battery backup circuit can be wired in sustained or maintained configurations5
Area Light | Products
SafeSite® LED Area Light
100-277 VAC, 120-250 VDC
Mechanical Information:
Fixture weight:
Class I, Div. 1
14.5 lbs (5.5 kg)
CID2, Class II, Class III 10 lbs (4.5 kg) - Polycarbonate lens
12 lbs (5.5 kg) - Glass lens
Wall mount models:
15 lbs (6.8 kg) - Polycarbonate lens
18 lbs (8.2 kg) - Tempered glass lens
45o wall mount models:
14 lbs (6.4 kg) - Polycarbonate lens
17 lbs (7.8 kg) - Tempered glass lens
45o stanchion mount:
15 lbs (6.7 kg) - Polycarbonate lens
18 lbs (8.1 kg) - Tempered glass lens
34mm conveyor mount:
15 lbs (6.7 kg) - Polycarbonate lens
18 lbs (8.1 kg) - Tempered glass lens
Shipping weight:
Add 2 lbs (0.91kg) to weights above
Cabling: 10’ (3.5 m) 5 conductor SOOW
14” (0.4 m) 5 conductor SOOW
Impact rating:
IK10 - Polycarbonate lens
IK07 - Tempered glass lens
Vibration resistance:
Tested per IEC 60068-2-6
Electrical Specifications:
Certifications & Ratings*
Operating voltage: 100 - 277 VAC 50/60Hz, 120-250 VDC
•
•
•
•
•
•
Total system power
consumption: See table
Operating temperature: -40°F to +149°F (-40°C to +65°C)
EMC: FCC Title 47, Subpart B, Section 15, Class A device CISPR-15
RF Immunity 20V/m 80MHz-1GHz.
Transient protection: 6 kV, 2 Ohm line-line and line-ground
Harmonics: IEC 61000-3-2, Class C
10 year warranty
UL 844, UL 1598/A
Class I, Div 1, Groups B, C, D
Class I, Div 2, Groups A, B, C, D
Class II, Div 1, Groups E, F, G
Class II, Div 2 Groups F, G
•
•
•
•
•
•
Class III, Div 1 & 2
CSA 22.2 No. 137:1981
CSA 22.2 No. 137-M81
IP66 / 67 / 69
NEMA 4X
Factory sealed
*ETL listed
Tempered Glass Lens
THD:
< 20%
Power factor: > 0.9
Construction:
Housing: Copper free aluminum
Finish: Superior dual coat finish
- Sealed polyester topcoat
- Chemical-resistant epoxy primer
Corrosion resistance: 1
Lens : 3,000-hour salt spray per ASTM B117
Tempered glass
Photometric Information:
CRI:80
Polycarbonate Lens
CCT:
5000K (cool white)
4000K (neutral white)
2700K (warm white)
Optics:
360°
180° forward throw for 45° mounting
Wide for 0° mounting
All values typical unless otherwise stated (tolerance +/- 10%)
1
For information on chemical compatibility, please contact your local
Dialight representative or follow this link to reference Dialight’s Chemical
Compatibility Guide:
www.dialight.com/pubs/MDTFCHEMRFLX001.PDF
Temperature Ratings
Dimensions in inches [mm]
6
Ambient Temperature Range T4A
Ambient Temperature Range T5
-40°F to +149°F (-40°C to +65°C)
-40°F to +113°F (-40°C to +45°C)
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Project Information
Part Number:
Project:
SafeSite® LED Area Light
Fixture Type:
Date:
100-277 VAC, 120-250 VDC
Notes
Specifications
Ordering Information
AL
2
Product
Code
Cert.
Lens
Material
Product Code
AL
Area Light
Certification
Beam
Dist.
CCT &
CRI
C
Cool White 5000K - 80 CRI
N
Neutral White 4000K - 80 CRI
W
Warm White 2700K - 80 CRI
UL 844 CIass I Div. 1
CSA C22.2 No. 137
D
UL 844 CIass I Div. 2
CSA C22.2 No. 137- M81
Operating Voltage
UL 844 CIass II Div. 1, 2
Class I Div. 2
CSA C22.2 No. 137- M81
2
P
UL 844 CIass I Div. 1 Group B
(Hydrogen) CSA C22.2 No. 137
Lens Material
5
Polycarbonate - Diffused
7
Glass - Clear
Beam Distribution
Lumen
Type
CCT & CRI
C
F
Oper.
Voltage
D
100-277 VAC, 120-250 VDC
Lumen Type
3
3,001 - 4,000 Lumens
4
4,001 - 5,000 Lumens
6
5,001 - 6,000 Lumens
7
6,001 - 7,000 Lumens
9
8,001 - 9,000 Lumens
A
180°
B
360°
Controls
W
Wide
D
Dimming (0-10V)
Mounting
Options
Controls
HW
Access.
Mounting Options
Retro-fit Adapter
Universal Mounting Adapter
(UMA)
A
Appleton Mercmaster III
B
Swivel Bracket, Locking 0°- 90°
316 Stainless Steel
Elect.
Access.
G
N
Coatings
Battery
Hardware Accessories
N
Factory Installed Mounting Adapters
W
10 ft (3 meter) Power Cable
Electrical Accessories
N
No Option
C
Crouse-Hinds - Champ
G
GE Filtr-Gard
H
Thomas & Betts Hazlux
K
Killark Certilite & Certilite V
M
Appleton Mercmaster II
Coatings
N
3/4” NPT
G
S
45° Stanchion Mount
Gray (RAL 7040)
U
UMA - Mounting Hub
V
0° Wall Mount
W
45° Wall Mount
Battery
Y
34mm Conveyor Mount
N
No Option
Notes
1) When ordering Certification C - UL 844 Class I Div. 1 or P - UL 844 Class I Div. 1 Group B (Hyrdogen): Lens Material = 7 - Glass, Mounting Option = B - Swivel Bracket,
Locking 0o - 90o 316 Stainless Steel or N - 3/4” NPT, Hardware Access. = W - 10ft (3 meter) Power Cable.
2) When ordering Beam Distribution W - Wide: Lumen Type = 7.
3) When ordering Mounting Options “UMA” or “Retro-fit”: Hardware Accessories = N.
4) When ordering Mounting Option U - UMA Mounting Hub HZXW01, HZXW45, HZXS45 or HZXCV34 is required. See page 20 for details.
5) For lumen output see page 10.
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
7
Area Light | Products
SafeSite® LED Area Light
347-480 VAC, 24-48 VDC, 120-277 VAC Battery Backup
Mechanical Information:
Certifications & Ratings*
•
•
•
•
•
•
5 year warranty
UL 844, UL 1598/A
Class I, Div 1, Groups A, B, C, D
Class I, Div 2, Groups A, B, C, D
Class II, Div 1, Groups E, F, G
Class II, Div 2, Groups F, G
•
•
•
•
•
•
Class III, Div 1 & 2
CSA 22.2 No. 137-M81
CSA 22.2 No. 250.0
IP66 / 67
NEMA 4X
Factory sealed
Fixture weight:
CID2, Class II, Class III Wall mount models:
45o wall mount models:
45o stanchion mount:
34mm conveyor mount:
Battery backup:
4.5 lbs (5.5 kg) - Class I, Div. 1
10 lbs (4.5 kg) - Polycarbonate lens
12 lbs (5.5 kg) - Glass lens
15 lbs (6.8 kg) - Polycarbonate lens
18 lbs (8.2 kg) - Tempered glass lens
14 lbs (6.4 kg) - Polycarbonate lens
17 lbs (7.8 kg) - Tempered glass lens
15 lbs (6.7 kg) - Polycarbonate lens
18 lbs (8.1 kg) - Tempered glass lens
15 lbs (6.7 kg) - Polycarbonate lens
18 lbs (8.1 kg) - Tempered glass lens
35 lbs (15.9 kg) - Polycarbonate lens
37 lbs (16.8 kg) - Tempered glass lens
Shipping weight:
Add 2 lbs (0.91kg) to weights above
Cabling: 10’ (3.5 m) 5 conductor SOOW
14” (0.4 m) 5 conductor SOOW
Impact rating:
IK10 - Polycarbonate lens
IK07 - Tempered glass lens
Vibration resistance:
Tested per IEC 60068-2-6
Electrical Specifications:
Operating voltage: 347 - 480V
24 - 28V
120 - 277 VAC battery backup
*ETL listed
Tempered Glass Lens
Total system power
consumption: See table
Operating temperature: -40°F to +149°F (-40°C to +65°C)
EMC: FCC Title 47, Subpart B, Section 15, Class A device
RF Immunity 20V/m 80MHz-1GHz.
Transient protection: 6 kV, 2 Ohm line-line and line-ground
Harmonics: IEC 61000-3-2, Class C
THD:
< 20%
Power factor: > 0.9
Construction:
Polycarbonate Lens
Housing: Copper free aluminum
Finish: Superior dual coat finish
- Sealed polyester topcoat
- Chemical-resistant epoxy primer
Corrosion resistance: 3,000-hour salt spray per ASTM B117
Lens1: Tempered glass
Photometric Information:
CRI:75
Battery Backup
CCT:
5000K (cool white)
4000K (neutral white)
Optics:
360°
180° forward throw for 45° mounting
Wide for 0° mounting
All values typical unless otherwise stated (tolerance +/- 10%)
1
For information on chemical compatibility, please contact your local
Dialight representative or follow this link to reference Dialight’s Chemical
Compatibility Guide:
www.dialight.com/pubs/MDTFCHEMRFLX001.PDF
Temperature Ratings
8
Dimensions in inches [mm]
Ambient Temperature Range T4A
Ambient Temperature Range T5
-40°F to +149°F (-40°C to +65°C)
-40°F to +113°F (-40°C to +45°C)
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Project Information
Part Number:
Project:
SafeSite® LED Area Light
Fixture Type:
Date:
347-480 VAC, 24-48 VDC, 100-277 VAC Battery Backup
Notes
Specifications
Ordering Information
AL
Product
Code
G
Cert.
Lens
Material
Product Code
AL
Area Light
Certification
C
UL 844 CIass I Div. 1
D
UL 844 CIass I Div. 2
CSA 22.2 No. 137 - M81
F
P
UL 844 CIass II Div. 1, 2
Class I Div. 2
CSA 22.2 No. 137 - M81
UL 844 CIass I Div. 1 Group B
(Hydrogen)
Beam
Dist.
CCT &
CRI
Oper.
Voltage
Lumen
Type
Amber
Retro-fit Adapter
B
Cool White 5000K - 70 CRI
L
Neutral White 4000K - 70 CRI
Elect.
Access.
Coatings
Battery
Hardware Accessories
N
Factory Installed Mounting Adapters
W
10 ft (3 meter) Power Cable
Universal Mounting Adapter
(UMA)
Operating Voltage
2
100 - 277 VAC - Battery Backup
A
Appleton Mercmaster III
Electrical Accessories
5
347 - 480 VAC
B
N
6
24 - 48 VDC
Swivel Bracket, Locking 0°- 90°
316 Stainless Steel
Lumen Type
480 VAC
Lens Material
24-48 VDC
120V Battery
Backup
2 0.1-2K
5
Polycarbonate - Diffused
4 3.1-4K
7
Glass - Clear
5 4.1-5K
5 4.1-5K
6 5.1-6K
Beam Distribution
HW
Access.
Mounting Options
CCT & CRI
A
Mounting
Options
Controls
7 6.1-7K
A
180°
Controls
B
360°
N
7 6.1-7K
7 6.1-7K
No Options
C
Crouse-Hinds - Champ
G
GE Filtr-Gard
H
Thomas & Betts Hazlux
K
Killark Certilite & Certilite V
M
Appleton Mercmaster II
N
3/4” NPT
S
45° Stanchion Mount
No Option
Coatings
G
Gray (RAL 7040)
U
UMA - Mounting Hub
V
0° Wall Mount
Battery
W
45° Wall Mount
F
180 min.
Y
34mm Conveyor Mount
N
No Option
Notes
Notes - When Ordering Battery Backup Models Use...
1) When ordering Certification C - UL 844 Class I Div. 1 or P - UL 844 Class I Div. 1
Group B (Hyrdogen): Lens Material = 7 - Glass, Mounting Option = B - Swivel
Bracket, Locking 0o - 90o 316 Stainless Steel or N - 3/4” NPT, Hardware Access. =
W - 10ft (3 meter) Power Cable.
1) Certification = D UL 844 Class I, Division 2
2) When using “UMA” or “Retro-fit” mounting options, Hardware Accessories = N.
4) Mounting Options = N (stainless steel bracket included)
3) Not all lumen options available for all voltage options, consult table.
5) Hardware Accessories = N (junction box included)
2) Beam Distribution = A 180° or B 360°
3) Operating Voltage = 2 120 - 277 VAC
6) Electrical Accessories = N (wiring via 3 positions push down terminal block)
www.dialight.com |
7) Battery = F 180 min.
8) Battery backup circuit can be wired in sustained or maintained configurations
9
Area Light | Technical Information
Lumen Tables
100-277 VAC, 120-250 VDC
Output Family
Beam Distribution
360°
9,000
180°
360°
7,300
180°
Wide
360°
5,700
180°
360°
4,200
180°
360°
3,100
180°
Lens
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
Wattage
Lumens
5000 CCT
5000
CCT lm/W
Lumens
4000 CCT
4000
CCT lm/W
Lumens
2700 CCT
2700
CCT lm/W
9000
8600
8300
8800
8400
8100
7300
7000
6700
7100
6800
6600
7300
7000
6700
5700
5400
5300
5500
5300
5100
4200
4000
3900
4100
3900
3800
3100
2900
2800
3000
2900
2800
136
131
127
134
128
124
140
135
131
138
132
128
114
110
106
143
137
133
140
134
130
140
134
130
137
132
127
129
124
120
127
121
118
8800
8400
8100
8600
8200
7900
7100
6800
6500
6900
6600
6400
7100
6800
6500
5500
5200
5100
5300
5100
4900
4100
3900
3800
4000
3800
3700
3000
2900
2700
2900
2800
2700
134
128
123
131
125
120
138
132
126
134
128
124
112
107
103
140
132
130
135
130
125
137
131
127
134
127
124
127
121
114
123
118
114
8200
7900
7600
8000
7700
7400
6700
6400
6100
6500
6200
6000
6700
6400
6100
5200
4900
4800
5000
4800
4600
3800
3600
3900
4100
3900
3400
2800
2600
2500
2700
2600
2500
124
120
115
121
117
112
129
123
117
125
119
115
105
100
95
130
123
120
125
120
115
127
120
130
137
130
113
117
108
104
113
108
104
66
52
64
40
30
24
24-48 VDC
Output Family
Beam Distribution
360°
7,000
180°
360°
5,000
180°
360°
3,000
180°
Lens
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
Wattage
71
49
27
Lumens
5000 CCT
5000
CCT lm/W
Lumens
4000 CCT
4000
CCT lm/W
7000
6700
6700
7000
6700
6700
5000
4800
4800
5000
4800
4800
3000
2800
2800
3000
2800
2800
99
95
95
99
95
95
102
98
98
102
98
98
111
107
107
111
111
107
6800
6500
6500
6800
6500
6500
4900
4700
4700
4900
4700
4700
2900
2800
2800
2900
2800
2800
97
93
93
97
93
93
100
96
96
100
96
96
109
105
105
109
105
105
All values typical unless otherwise stated (tolerance +/- 10%)
For lighting layouts, please find IES files at www.dialight.com
10
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Area Light | Technical Information
Lumen Tables
340-480 VAC
Output Family
Beam Distribution
360°
7,250
180°
360°
6,000
180°
360°
5,000
180°
4,100
Wide
360°
4,000
180°
360°
2,200
180°
Lens
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
1/4" AR Glass
Class I, Div 1 Glass
Polycarbonate
Wattage
68
58
47
55
38
21
Lumens
5000 CCT
5000
CCT lm/W
Lumens
4000 CCT
4000
CCT lm/W
7200
6900
6900
7200
6900
6900
6000
5700
5700
6000
5700
5700
5000
4800
4800
5000
4800
4800
107
102
102
107
102
102
103
99
99
103
99
99
106
102
102
106
106
102
7100
6800
6800
7100
6800
6800
5800
5600
5600
5800
5600
5600
4900
4700
4700
4900
4700
4700
104
100
100
104
100
100
101
97
97
101
97
97
104
100
100
104
100
100
4100
75
4000
73
4000
3800
3800
4000
3800
3800
2200
2200
2200
2200
2200
2200
105
101
101
105
101
101
105
105
105
105
105
105
3900
3700
3700
3900
3700
3700
2200
2200
2200
2200
2200
2200
103
99
99
103
99
99
105
105
105
105
105
105
100-277 VAC Battery Backup
Output Family
Beam Distribution
360°
7,500
180°
Lens
Wattage
Lumens
5000 CCT
5000
CCT lm/W
Lumens
4000 CCT
4000
CCT lm/W
1/4" AR Glass
Polycarbonate
1/4" AR Glass
Polycarbonate
85
7500
7200
7500
7200
88
85
88
85
7300
7000
7300
7000
86
83
86
83
All values typical unless otherwise stated (tolerance +/- 10%)
For lighting layouts, please find IES files at www.dialight.com
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
11
Area Light | Technical Information
Lumen Maintenance Factor Tables
Lumen Maintenance Factor
Time (Hours)
Ambient (C)
0
15000
30000
45000
60000
75000
90000
100000
200000
300000
25°
100
98
96
95
94
92
91
90
82
75
30°
100
98
96
95
94
92
91
90
82
75
35°
100
98
96
95
94
92
91
90
82
75
40°
100
98
96
95
94
92
91
90
82
75
45°
100
98
96
95
94
92
91
90
82
75
50°
99
97
95
94
93
91
90
89
81
74
55°
98
96
94
93
92
90
89
88
81
73
60°
97
95
93
92
91
90
88
88
80
73
65°
96
94
92
91
90
89
87
87
79
72
Measured LED temperature for an ambient temperature range of 25oC to 65oC and calculated lumen maintenance using TM-21 calculator and LED LM80 data.
Data in the above tables relates to 100 – 277 VAC, 120-250 VDC product. For information about 347-480 VAC, 24-48 VDC, Battery back-up products please visit www.dialight.com.
Lighting Layouts
ALU7AN29xxxxxN
Calculation Summary - Mounting Height: 8’
Calc Type
Units
Avg
Max
Min
Avg/Max
Max/Min
Illuminance
fc
27.32
51.3
12.5
2.19
4.10
ALU7WN29xxxxxN
Calculation Summary - Mounting Height: 8’
12
Calc Type
Units
Avg
Max
Min
Avg/Max
Max/Min
Illuminance
fc
19.23
34.8
7.5
2.56
4.64
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Area Light | Technical Information
Lighting Layouts
ALU7BC29xxxxxN
Calculation Summary - Mounting Height: 15’ Workplane: 2.5’
Calc Type
Units
Avg
Max
Min
Avg/Max
Max/Min
Illuminance
fc
19.60
26.6
9.4
2.09
2.83
ALU7BC27xxxxxN
Calculation Summary - Mounting Height: 15’ Workplane: 2.5’
Calc Type
Units
Avg
Max
Min
Avg/Max
Max/Min
Illuminance
fc
15.88
21.5
7.6
2.09
2.83
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
13
Area Light | Technical Information
Beam Distribution
100-277 VAC, 120-250 VDC
180° Beam Angle
360° Beam Angle
Wide Beam Angle
= 0O
= 90O
14
www.dialight.com
Area Light | Technical Information
Beam Distribution
347-480 VAC, 24-48 VDC, 120-277 VAC Battery Backup
180° Beam Angle
360° Beam Angle
Wide Beam Angle
= 0O
= 90O
www.dialight.com
15
Area Light | Technical Information
Dimming
Dimming Characterization 0 - 10V
Input Power VS Dimming
100
100%
90
90%
80%
80
PERCENTAGE INPUT POWER
70%
70
60
60%
50
50%
40
40%
30%
30
20
20%
10
10%
0
0%
0
1
2
3
4
5
6
7
8
9
10
7
8
9
10
DIMMING VOLTAGE
Dimming Curve
Light output VS Dimming
100
100%
90%
90
80%
80
PERCENTAGE LIGHT OUTPUT
70%
70
60
60%
50%
50
40%
40
30%
30
20
20%
10%
10
0%
0
0
1
2
3
4
5
6
DIMMING VOLTAGE
Dimming Curve
16
www.dialight.com
Area Light | Technical Information
Thermal Roll-Off
Lumen Depreciation
Thermal
Roll-off
Area
Light
Thermal
Rolloff
90009000lm
Lm Area
Light
Ambient
Temperature (C)
Lumen Degradation
110%
25°
100%
100%
30°
99%
35°
100%
40°
100%
45°
100%
70%
50°
99%
60%
55°
98%
60°
97%
65°
96%
90%
80%
50%
20
25
30
35
40
45
50
55
60
65
Ambient Temperature ( C )
70
All values typical unless otherwise stated (tolerance +/- 10%)
In Rush Current / Circuit Breakers
In rush current @ input voltage
Model
Wattage
9K
Time duration of in rush current @ input voltage
120 VAC
230 VAC
277 VAC
120 VAC
230 VAC
277 VAC
66
8A
15A
18A
1ms
1ms
1ms
7K
52
8A
15A
18A
1ms
1ms
1ms
7K Wide
64
8A
15A
18A
1ms
1ms
1ms
5.5K
40
8A
15A
18A
1ms
1ms
1ms
4K
30
8A
15A
18A
1ms
1ms
1ms
3K
24
8A
15A
18A
1ms
1ms
1ms
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
17
Area Light | Mounting Options
Mounting Options
3/4” NPT Pendant & Conduit Mounting
Part Number: ALxxxx2xDNNxGN
Ceiling & Wall Mounting
Area Light with 0o Wall Mount
Part Number: ALxxxx2xDVNxGN
+
Area Light with
Mounting Hub
Part Number: ALxxxx2xDUNxGN + HZXW01
0o Wall Mount
Area Light with 45o Wall Mount
Part Number: Part number: ALxxxx2xDWNxGN
+
Area Light with
Mounting Hub
18
Part Number: ALxxxx2xDUNxGN + HZXW45
45o Wall Mount
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Area Light | Mounting Options
Mounting Options
Stanchion & Pole Mounting
Area Light with 45o Stanchion Mount
Part Number: ALxxxx2xDSNxGN
+
Part Number: ALxxxx2xDUNxGN + HZXS45
Area Light with
Mounting Hub
45o Stanchion Mount
Area Light with 35mm Slip-fit Pole Mount
Part Number: ALxxxx2xDYNxGN
+
Area Light with
Mounting Hub
Part Number: ALxxxx2xDUNxGN + HZXCV34
35mm Slip-fit Pole Mount
+
Area Light
+
Adjustable Bracket
Part Number: ALxxxx2xDNNxGN + HZXW3 +
HZXSTANxxxx or HZXW4
Stanchion Mount Adapter
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
19
Area Light | Mounting Options
Mounting Products
Fixtures are available with a universal mounting adapter factory installed, see product N-chart for details.
Choose from one of the four available mounting options:
ALxxxx2xDUNxGN
Wall Mount
HZXW01
45° Wall Mount
HZXW45
45° Stanchion Mount
HZXS45
34mm Slip-fit Pole Mount
HZXCV34
Certified to: UL 50E • CSA C22.2 No. 94.2-07
HZXSTAN100S
• 1.00” (1.315” Pole OD) Slip-fit stanchion mount
HZXSTAN125S
• 1.25” (1.660” Pole OD) Slip-fit stanchion mount
HZXSTAN150S
• 1.50” (1.900” Pole OD) Slip-fit stanchion mount
HZXW3
• 316 stainless steel bracket
HZXW7
• Aluminum bracket
HZXSTAN200S
• 2.00” (2.375” Pole OD) Slip-fit stanchion mount
HZXSTAN100T
• 1.00” (1.315” Pole OD) NPT threaded stanchion mount
HZXSTAN125T
HZXW4
• 316 stainless steel bracket with pipe clamp
• 1.25” (1.660” Pole OD) NPT threaded stanchion mount
HZXSTAN150T
• 1.50” (1.900” Pole OD) NPT threaded stanchion mount
HZXW8
• Aluminum bracket with pipe clamp
HZXSTAN200T
• 2.00” (2.375” Pole OD) NPT threaded stanchion mount
Certified to: UL 50E • UL 1203
HZXSAFECBLS
ISA 12.12.01 • CSA C22.2 No. 94.2-07
• Safety cable kit
HBXC1
• 0.75” NPT Ceiling mount
20
Certified to: UL 50E • CSA C22.2 No. 94.2-07
Certified to: UL 50E • CSA C22.2 No. 94.2-07
HZXJB075
HZXJB075PC1
• 0.75” Ceiling / Wall / Pole mount junction box
• 0.75” Junction box with photocell
HZXJB100
HZXJB100PC1
• 1.00” Ceiling / Wall / Pole mount junction box
• 1.00” Junction box with photocell
HZXJB125
HZXJB125PC1
• 1.25” Ceiling / Wall / Pole mount junction box
• 1.25” Junction box with photocell
HZXJB150
HZXJB150PC1
• 1.50” Ceiling / Wall / Pole mount junction box
• 1.50” Junction box with photocell
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Area Light | Mounting Options
Universal Mounting Adapters
Two ways to buy...
1.
Factory Installed for Work Site
Purchase Brackets Factory Installed
45o Stanchion Mount
45o Wall Mount
Wall Mount
34mm Slip-Fit Pole Mount
ALxxxx2xDSNxGN
ALxxxx2xDWNxGN
ALxxxx2xDVNxGN
ALxxxx2xDYNxGN
2.
UMA Mounting Hub Compatible
with All Four Mounting Options for Flexibility
Assembled with UMA adapter / For multiple applications and standardization efforts at your facility, you can order fixture with
UMA adapter installed at the factory. This allows for use with any of our wall or stanchion mount top brackets which you can
order separately and mate up in the field.
Stock Area Lights with Universal Mounting Adapters & Brackets Sold Separately
+
Area Light
45o Stanchion Mount
45o Wall Mount
Wall Mount
34mm Slip-Fit Pole Mount
ALxxxx2xDUNxGN
HZXS45
HZXW45
HZXW01
HZXCV34
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
21
Area Light | Retrofit Options
Retro-fit Options
Retro-fit adapters can be factory installed. See product N-chart for details.
Eaton’s Crouse-Hinds – Champ®
GE Lighting Solutions – Filtr-Gard™
Holophane Petrolux® II, III
Thomas & Betts Hazlux®
Appleton® Mercmaster III
Appleton® Mercmaster II
Killark® Certilite® & Certilite® V
*Petrolux adapter available as a standalonne accessory only
Eaton’s Crouse-Hinds – Champ® - HZXTHCH
Pendant
Ceiling
Wall
Stanchion
Quad Mount
APM2
CM2
TWM2
JM5
QM25
APM3
CM3
TWM3
PM5
HPM2
GE Lighting Solutions – Filtr-Gard™ - HZXTHGE
Pendant
Ceiling
Wall
Stanchion
Quad Mount
3P
3F
3C
3W
5S
4P
4F
4W
6S
5J, 6J
Holophane® Petrolux II, III - HZXTHP3
22
Pendant
Universal
Stanchion
Ceiling
Wall
PD
UN
SA
CD
WL
GH
ST
CE
W
P
A
B, C, D
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Area Light | Retrofit Options
Retro-fit Options
Thomas & Betts Hazlux® - HZXTHTB
Pendant
Pendant Cone
Flexible Pendant
Ceiling
Wall
VP2
VA2
VF2
VC2
VB2
VP3
VA3
VF3
VC3
VB3
Wall
25° Angle Stanchion
25° AngleStanchion
Straight Stanchion
Straight Stanchion
VB2-VIB
VS4
VS4-VIB
VL4
VL4-VIB
VB3-VIB
VS5
VS5-VIB
VL5
VL5-VIB
Appleton® Mercmaster III - HZXTHAP
Pendant
Ceiling
Wall
Stanchion
KPA- 75, 100
KPC-75
KPWB-75
KPS-125
KPAF-75, 100
KPC-100
KPWB-100
KPCH-75, 100
KPS-150
KPST-125
KPST-150
Appleton® Mercmaster II - HZXTHM2
Pendant
Ceiling
Wall
Stanchion
LPA-75
LPC-75
LPWB-75
LPS-125
LPA-100
LPC-100
LPWB-100
LPS-150
Killark® Certilite® & Certilite® V - HZXTHKL
Pendant
Ceiling
Wall
VMA2B & VMA-2
VMX2B & VMX-2
VMB2B & VMB-2
Stanchion
VMD4B
VMA3B & VMA-3
VMX3B & VMX-3
VMB3B & VMB-3
VMD5B
VMC2B & VMC-2
VMX6B, 7B, 8B, 9B
VMS5B
VMC3B & VMC-3
VMF2B, 3B
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
23
Area Light | Dimensional Drawings
Dimensional Drawings - Area Light
Polycarbonate Lens
Tempered Glass Lens
Dimensions in inches [mm]
24
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Area Light | Dimensional Drawings
Dimensional Drawings - Area Light
Battery Backup Model
Dimensions in inches [mm]
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
25
Area Light | Dimensional Drawings
Dimensional Drawings - Accessories
HZXW3, HZXW4, HZXW7, AND HZXW8
.25” thick; HZXW4 and HZWX8 will mount to 1.5” conduit and comes with pipe mount clamps.
Battery Backup model bracket
HBXC1 / HBXW1
Dimensions in inches [mm]
26
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Area Light | Dimensional Drawings
Dimensional Drawings - Accessories
HZXSTANXXXX
HZXJBXXX and HZXJBXXXXXX
Dimensions in inches [mm]
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
27
Area Light | Dimensional Drawings
Dimensional Drawings - Universal Mounting Adapters
45o Stanchion Mount
2” NPT
1.5” NPT adapter included
45o Wall Mount
Dimensions in inches [mm]
28
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Area Light | Dimensional Drawings
Dimensional Drawings - Universal Mounting Adapters
Wall Mount
34mm Slip-Fit Pole Mount
Dimensions in inches [mm]
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
29
Area Light | Dimensional Drawings
Dimensional Drawings - Retro-fit Kits
Eaton’s Crouse-Hinds – Champ® - HZXTHCH
GE Lighting Solutions – Filtr-Gard™ - HZXTHGE
Holophane® Petrolux II, III - HZXTHP3
Dimensions in inches [mm]
30
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Area Light | Dimensional Drawings
Dimensional Drawings - Retro-fit Kits
Thomas & Betts Hazlux® - HZXTHTB
Appleton® Mercmaster III - HZXTHAP
Appleton® Mercmaster II - HZXTHM2
Killark® Certilite® & Certilite® V - HZXTHKL
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
31
Area Light | Hazardous Ratings
Hazardous Locations Ratings - UL
Fixed and portable fixtures for installation and use in hazardous (classified) locations Class I, Divisions 1 and 2, Groups
A, B, C, and D; Class II, Division 1, Groups E, F, and G; Class II, Division 2, Groups F and G; and Class III, Divisions
1 and 2, in accordance with the National Electrical Code, NFPA 70
Classes
The classes define the general nature of hazardous material in the surrounding atmosphere.
Class
Hazardous Material in Surrounding Atmosphere
Class I
Hazardous because flammable gases or vapors are present in the air in quantities sufficient to produce explosive or ignitable mixtures
Class II
Hazardous because combustible or conductive dusts are present
Class III
Hazardous because ignitable fibers or flying’s are present, but not likely to be in suspension in sufficient quantities to produce ignitable
mixtures. Typical wood chips, cotton, flax and nylon. Group classifications are not applied to this class
Divisions
The division defines the probability of hazardous material being present in an ignitable concentration in the surrounding
atmosphere.
Division
Presence of Hazardous Material
Division 1
The substance referred to by class is present during normal conditions
Division 2
The substance referred to by class is present only in abnormal conditions, such as a container failure or system breakdown
Groups
The group defines the hazardous material in the surrounding atmosphere.
Group
Hazardous Material in Surrounding Atmosphere
Group A
Acetylene
Group B
Hydrogen, fuel and combustible process gases containing more than 30% hydrogen by volume or gases of equivalent hazard such as
butadiene, ethylene, oxide, propylene oxide and acrolein
Group C
Carbon monoxide, ether, hydrogen sulfide, morphline, cyclopropane, ethyl and ethylene or gases of equivalent hazard
Group D
Gasoline, acetone, ammonia, benzene, butane, cyclopropane, ethanol, hexane, methanol, methane, vinyl chloride, natural gas, naphtha,
propane or gases of equivalent hazard
Group E
Combustible metal dusts, including aluminum, magnesium and their commercial alloys or other combustible dusts whose particle size,
abrasiveness and conductivity present similar hazards in connection with electrical equipment
Group F
Carbonaceous dusts, carbon black, coal black, charcoal, coal or coke dusts that have more than 8% total entrapped volatiles or dusts
that have been sesitized by other material so they present an explosion hazard
Group G
Flour dust, grain dust, flour, starch, sugar, wood, plastic and chemicals
Reference:
http://www.engineeringtoolbox.com/hazardous-areas-classification-d_347.html
Dialight’s Industry Leading 5, 7 and 10 Year Warranties
At Dialight, we take great pride in the design and robust engineering of our products. We deeply understand the harsh environments that our customers
depend on our fixtures to illuminate each day. That’s why our fixtures are built specifically for longevity in these conditions.
We are the only industrial LED lighting supplier with fully-integrated products built for industrial applications, featuring custom in-house power supplies
designed for long-life with superior temperature tolerance, vibration resistance and built-in surge protection. Additionally, our sealed fixtures prevent
moisture and contaminants from causing failures or reducing lifespan.
We stand behind our industry leading warranties with proven real-world results in the world’s most challenging environments and extensive quality control
testing. Additionally, whilst some other manufacturers may require a minimum threshold of 10% or more of LED components to fail in order for a product
to be defective, we do not require this because the safety and productivity of your work site is of paramount importance to us.
To learn more about our warranties, please visit www.dialight.com
32
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Area Light | Notes
Notes
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
33
North American HQ
1501 Route 34 South
Farmingdale, NJ 07727
Tel: 732-919-3119
Fax: 732-751-5778
info@dialight.com
Australia
38 O'Malley Street
Osborne Park, WA 6017
Tel: +61 (0) 8 9244 7600
Fax: +61 (0) 8 9244 7601
info@dialight.com.au
EMEA Technical Centre
Ejby Industrivej 91 B
200 Glostrup
Tel: +45 8877 4545 (Denmark)
Tel: +44 1638 666541 (UK)
Tel: +49 89 12089 5713 (Germany)
Tel: +33 3 23 22 62 58 (France)
sales-europe@dialight.com
Southeast Asia
33 Ubi Avenue 3
#07-72 Vertex (Tower A)
Singapore 408868
Tel: +65 6578 7157
Fax: +65 6578 7150
enquiry@dialight.com.sg
Houston
16830 Barker Springs Rd
Ste 407
Houston, TX 77084
Tel: 732-919-3119
Faz: 281-492-1531
info@dialight.com
Brazil
Alameda Mercurio,
225 – American Park Empresarial NR
Indaiatuba – SP – 13347– 662
Tel: +55 (19) 3113-4300
Fax: +55 (19) 3113-4300
brasil@dialight.com
Middle East
Level 42
Emirates Towers (Office Tower)
Sheikh Zayed Road
Dubai, United Arab Emirates
Fax: +971 (0) 4319 7686
Tel: +971 (0) 4319 7686
ALL VALUES ARE DESIGN OR TYPICAL VALUES WHEN MEASURED UNDER LABORATORY CONDITIONS. THE LIGHTING EFFICIENCY STATEMENTS
CONTAINED HEREIN ARE CALCULATED ON A LUMEN PER WATTS BASIS WHEN COMPARING FIXTURES WITH SIMILAR FEATURES. ALL INFORMATION
PROVIDED IS ACCURATE AS OF THE DATE OF PUBLICATION, IS SUBJECT TO CHANGE WITHOUT NOTICE AND DOES NOT FORM PART OF ANY
CONTRACT WITH DIALIGHT. DIALIGHT DOES NOT WARRANT OR REPRESENT THAT ITS PRODUCTS ARE FIT FOR ANY PARTICULAR PURPOSE AND
HAS NO RESPONSIBILITY FOR THE [INAPPROPRIATE/UNAUTHORISED/NON-APPROVED] USE OF ANY DIALIGHT PRODUCTS BY THE END USER.
Dialight reserves the right to make changes at any time in order to supply the best product possible.
The most current version of this document will always be available at: www.dialight.com
www.dialight.com | Dialight_LED_AreaLight_SpecSheet_UL_Jan2018
Download PDF
Similar pages