SPECIFICATIONS ORDERING CODE FEATURES

Pavilion™ Bollard
JOB
TYPE
NOTES
APPROVALS
FEATURES
PA7R
kl_pa7r_spec.pdf
CERTIFICATIONS
• Traditional or Performance Optics
• Dual receptacle power panel
• Bluetooth enabled RGBW accent
• PA System capability
• Integral NEMA 3R Enclosure
• IP66 optical system
SPECIFICATIONS
FT
Flat Top
NU configurations in 3000K
and warmer CCTs only
CT
Crowned Top
(165 mm)
NU
No Up-light
42.5”
41.7”
Diffuse Lens
6.5”
5.7”
(145 mm)
(1080 mm)
(1059 mm)
OPTICS
Clear Lens
UO
CH
Horizontal Lens
CL
Vertical Lens
DL
Vertical Lens
LV
Louver
GC
Grille
GD
Grille
36.0”
36.0”
(914 mm)
(914 mm)
7”
7”
(178 mm Ø)
(178 mm Ø)
ORDERING CODE
Model
Top
PA7R Pavilion 7" Ø Round
FT Flat Top
CT Crowned Top1
Body
24A
42A
42BR-C
42NG-C
42A-ROP
24” OAH, Aluminum
42” OAH, Aluminum
42” OAH, Brown Concrete
42” OAH, Natural Gray Concrete
42” OAH, Aluminum + Duel Receptacle
Outlet Panel and Cover
42A-ROP-L 42” OAH, Aluminum + Duel Receptacle
Outlet Panel and Locking Cover
42A-2GEB 42” OAH, Aluminum + Integral Recessed
2 Gang Electrical Box
42A-SG3 42” OAH, Aluminum + Speaker Grille
Enclosure for 3” Ø speaker
Optics
NU
CH
CL
DL
LV
GC
GD
Distribution
1
2
3
3HS
4
5
No Up-light
Clear Horizontal Lens
Clear Vertical Lens
Diffuse Vertical Lens2
Louvers
Grille with clear vertical lens
Type I
Type II
Type III
Type III + House side shield
Type IV
Type V
Grille with diffuse vertical lens2
Fixture Finish
BL
DB
LG
GT
PS
TT
WH
RAL
CC
Black
Dark Bronze
Controls
SWP SiteSync pre-commission
MW Motion sensing (50% dim,
100% output upon detection)3
Light Gray
Graphite
Platinum Silver
Titanium
White
Light Engine
12L-010-5K7
12L-010-4K7
12L-010-3K7
12L-010-AMB
12L-020-5K7
12L-020-4K7
12L-020-3K7
12L-020-AMB
SiteSync Accessories
SWUSB SiteSync Software on USB
SWTAB SiteSync Windows® Tablet
SWBRG SiteSync Wireless
RAL Color
© 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Dec. 15, 2017
14W (1000 nominal lm), 4000K, 70 CRI
14W (1000 nominal lm), 3000K, 70 CRI
14W, Amber 560 nm Monochromatic
22W (2000 nominal lm), 5000K, 70 CRI
22W (2000 nominal lm), 4000K, 70 CRI
22W (2000 nominal lm), 3000K, 70 CRI
22W, Amber 560 nm Monochromatic
Voltage
UNV
120
277
347
480
Bridge Node
Custom Color*
1Adds .6 / 15mm to OAH (over all height).
2Only Available with 1 Type I or 5 Type V distributions only.
3 Not Available with CH.
4 Dedicated input voltage, required for MW Motions sensing.
5-20°C min starting temperature, 90+ minute run time, output equivalent to 12L-010-#K7
Microsoft, Encarta, MSN, and Windows are either registered trademarks or trademarks
6 Adds 1" / 254mm to OAH (over all height).
of Microsoft Corporation in the United States and/or other countries.
7SF for 120, 277 and 347 input voltage, DF for 208, 240 and
Kim Lighting reserves the right to change specifications without notice.
480 input voltage.
*Consult factory
14W (1000 nominal lm), 5000K, 70 CRI
Options
120-277V
120V 4
208-277V
347V 4
4
EM
LR
SF
DF
Battery Backup 5
Luminous Accent 6
Single Fuse 7
Double Fuse 7
480V 4
PRECOMMISSIONED SITESYNC ORDERING INFORMATION:
When ordering a fixture with the SiteSync lighting control
option, additional information will be required to complete
the order. The SiteSync Commissioning Form or alternate
schedule information must be completed. This form
includes Project location, Group information, and Operating
schedules. For more detailed information please visit www.
HubbellLighting.com/products/sitesync or contact Hubbell
Lighting tech support at (800) 345-4928.
1
SiteSync fixtures with occupancy sensor (SWPM) require the
mounting height of the fixture for selection of the lens.
Examples:
PA7R/FT/NU3/12L-020-3K7/42A/TT/SWP/UNV/LR
| 1 |
Pavilion™ Bollard
PA7R
kl_pa7r_spec.pdf
LUMINAIRE PERFORMANCE
LED
#
Nominal
Lumen
Package
3000K
Nominal
Wattage
Lens
Options
NU
UO Optics
CH
Clear
Horizontal
Lens
CL
Clear
Vertical Lens
12L
1,000
14
DL
Diffused Vertical Lens
LV
External Louvers
GC
Grille with Clear Lens
GD
Grille with Diffused Lens
Distribution
Lumen
4000K
BUG Rating
B
U
G
Im/w
Lumen
5000K
BUG Rating
B
U
G
Im/w
Lumen
BUG Rating
B
U
G
Im/w
1
2
3
3HS
4
5
1
2
3
3HS
4
5
1
2
3
3HS
4
5
1
5
749
860
809
684
977
908
1184
1139
1094
960
1152
1225
1146
1228
1276
1030
1272
1305
1086
1141
0
0
0
0
0
1
0
0
0
0
0
1
0
0
0
0
0
1
0
1
0
0
0
0
0
0
3
3
3
3
3
3
3
3
3
3
3
3
3
3
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
54
62
58
49
70
65
85
82
79
69
83
88
82
88
92
74
91
94
78
82
815
936
881
744
1063
988
1288
1239
1190
1045
1254
1333
1247
1336
1389
1121
1384
1420
1182
1241
0
0
0
0
0
1
0
0
0
0
0
1
0
1
1
0
0
1
0
1
0
0
0
0
0
0
3
3
3
3
3
3
3
3
3
3
3
3
3
3
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
59
67
63
53
76
71
92
89
85
75
90
96
90
96
100
80
99
102
85
89
835
958
902
762
1089
1011
1319
1269
1219
1070
1284
1365
1277
1368
1422
1148
1417
1454
1210
1271
0
0
0
0
0
1
0
0
0
0
0
1
0
1
1
0
0
1
0
1
0
0
0
0
0
0
3
3
3
3
3
3
3
3
3
3
3
3
3
3
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
60
69
65
55
78
73
95
91
87
77
92
98
92
98
102
82
102
104
87
91
1
2
3
3HS
4
5
1
2
3
3HS
4
5
489
534
550
397
577
583
843
829
831
694
901
842
728
782
0
0
0
0
0
1
0
0
0
0
0
1
0
1
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
35
38
40
29
41
42
61
60
60
50
65
60
52
56
533
581
599
432
628
634
917
903
905
755
980
916
792
851
0
0
0
0
0
1
0
0
0
0
0
1
0
1
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
38
42
43
31
45
46
66
65
65
54
70
66
57
61
545
595
613
442
643
649
939
924
926
773
1004
938
811
872
0
0
0
0
0
1
0
0
0
0
0
1
0
1
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
39
43
44
32
46
47
67
66
67
56
72
67
58
63
Kim Lighting reserves the right to change specifications without notice.
© 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Dec. 15, 2017
| 2 |
Pavilion™ Bollard
LUMINAIRE
PERFORMANCE
JOB
NOTESNominal
LED
#
Lumen
Package
Lens
Options
NU
UO Optics
CH
Clear
Horizontal
Lens
CL
Clear
Vertical Lens
12L
2,000
TYPE
3000K
Nominal
Wattage
22
DL
Diffused Vertical Lens
LV
External Louvers
GC
Grille with Clear Lens
GD
Grille with Diffused Lens
PA7R
kl_pa7r_spec.pdf
Distribution
Lumen
4000K
APPROVALS
BUG Rating
B
U
G
Im/w
Lumen
5000K
BUG Rating
B
U
G
Im/w
Lumen
BUG Rating
B
U
G
Im/w
1
2
3
3HS
4
5
1
2
3
3HS
4
5
1
2
3
3HS
4
5
1
5
1044
1199
1128
953
1362
1265
1778
1711
1643
1443
1731
1841
1852
1984
2062
1665
2055
2109
1639
1721
0
0
0
0
0
1
0
1
1
0
0
1
0
1
1
0
0
1
1
1
0
0
0
0
0
0
3
3
3
3
3
3
4
3
3
3
3
3
3
3
0
0
1
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
2
2
48
55
52
44
63
58
82
79
76
66
80
85
85
91
95
77
95
97
76
79
1136
1305
1228
1037
1482
1377
1935
1862
1788
1570
1884
2003
2016
2159
2244
1811
2236
2295
1783
1873
0
0
0
0
0
1
0
1
1
0
0
1
1
1
1
0
1
1
1
1
0
0
0
0
0
0
3
3
3
3
3
3
4
3
3
3
3
3
3
3
0
0
1
0
1
0
1
1
1
1
1
1
1
1
1
1
1
1
2
2
52
60
57
48
68
63
89
86
82
72
87
92
93
99
103
83
103
106
82
86
1164
1336
1257
1062
1518
1410
1981
1906
1831
1608
1929
2051
2064
2211
2298
1855
2290
2350
1826
1918
0
0
0
0
0
1
0
1
1
0
0
1
1
1
1
0
1
1
1
1
0
0
0
0
0
0
3
3
3
3
3
3
4
3
3
3
3
3
3
3
0
0
1
1
1
0
1
1
1
1
1
1
1
1
1
1
1
1
2
2
54
62
58
49
70
65
91
88
84
74
89
95
95
102
106
85
106
108
84
88
1
2
3
3HS
4
5
1
2
3
3HS
4
5
746
814
838
605
879
888
1038
1021
1024
854
1109
1037
1036
953
0
1
1
0
0
1
0
0
0
0
0
1
0
1
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
34
37
39
28
41
41
48
47
47
39
51
48
48
44
811
885
912
658
956
966
1130
1111
1114
930
1207
1128
1127
1037
1
1
1
0
1
1
0
1
1
0
0
1
1
1
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
2
1
37
41
42
30
44
45
52
51
51
43
56
52
52
48
831
907
934
674
979
989
1157
1138
1141
952
1236
1155
1154
1062
1
1
1
0
1
1
0
1
1
0
0
1
1
1
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
2
1
38
42
43
31
45
46
53
52
53
44
57
53
53
49
Kim Lighting reserves the right to change specifications without notice.
© 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Dec. 15, 2017
| 3 |
Pavilion™ Bollard
LUMINAIRE
PERFORMANCE
JOB
TYPE
Electrical Characteristics
NOTES
APPROVALS
Current
System
Watts
350mA
14
500mA
22
Line Voltage
VAC
Hz
120-480
50/60
Amps AC
120
208
240
277
347
480
0.18
0.11
0.09
0.08
0.06
0.05
0.12
0.07
0.06
0.05
0.04
0.03
PA7R
kl_pa7r_spec.pdf
Dimming
Min. Power
Factor
Max THD
(%)
Dimming
Range
>0.9
20
10% to 100%
Source current out
Absolute voltage
Min
Max
Min
Max
0mA
1mA
0V
10V
TM-21 LIFETIME CALCULATION
Ambient Temp.
0
25,000
25°C / 77°F
100%
98%
Operating Hours
TM-21-11
36,000
97%
40°C / 104°F
100%
98%
97%
LUMINOUS ACCENT
5.7
(145 mm)
1.0
(25.4 mm)
50,000
100,000
95%
90%
95%
90%
Calculated L70
(hours)
'60khrs
The Luminous Accent option adds an additional
1” / 25.4mm to the overall fixture height and
may be controlled via wired DMX RDM or
Bluetooth wireless.
HUBBELL LIGHTING RGBW REMOTE APP
42.7
(914 mm)
36.0
(914 mm)
The Hubbell Lighting RGBW Remote application may be downloaded
free of charge from the Apple App Store or Google Play.
• Color selection and adjustment.
• Group and rename fixtures.
• Camera function for color matching.
• Fixture is password protected,
• Intensity slider for dimming/ramping up. refer to instructions to set
unique password.
• Save and rename up to 10 presets.
MOUNTING
Aluminum Body
Street Side
Kim Lighting
Logo
Once attached to base mounting
plate, fixture may be rotated 20° in
either direction and secured with
set screws at base of the bollard
body. KIM Lighting logo indicates
‘street side’ output.
2.20”
56mm
Ø 7.00”
179mm
3.75”
95mm
Top View
Ø 5.00” / 127mm
BOL T CIRCLE
Kim Lighting reserves the right to change specifications without notice.
© 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Dec. 15, 2017
| 4 |
Pavilion™ Bollard
TYPE
JOB
RECEPTACLE
OUTLET PANEL
The Receptacle outlet panel shall be NEMA 3R rated for wet
NOTES while in use and shall be compatible with any single
location(s)
receptacle outlet device with standard mounting holes. Door
shall be self-closing. Tamper resistant lock must be specified at
time of order. Devices and device wiring by others.
PA7R
kl_pa7r_spec.pdf
Range of Motion for access door
APPROVALS
10.1”
8.9”
(256 mm)
(226 mm)
1”
(25 mm)
100°
21.4”
(543 mm)
HUBBELL WIRING DEVICES USB DEVICES: http://ecatalog.hubbell-wiring.com/productinformation/viewcatalog.aspx?Dest=hubbell-wiring.com/press/catalog/A.pdf&Page=18
INTEGRAL ELECTRICAL BOX
4.6”
(117 mm)
The integral 2 Gang electrical box shall be #” deep and
have standard mounting holes for installing either a single
receptacle outlet device or a pair of single receptacle outlet
device. Devices, device wiring, device hardware and bezel
by others.
4.6”
3.3”
(117 mm)
(84 mm)
B
.91”
27.2”
(23 mm)
(691 mm)
1.8”
(46 mm)
DETAIL B
.68”
(17 mm)
HUBBELL WIRING DEVICES GFCI DEVICES: http://ecatalog.hubbell-wiring.com/productinformation/viewcatalog.aspx?Dest=hubbell-wiring.com/press/catalog/K.pdf
SPEAKER GRILLE ENCLOSURE
The speaker grille enclosure shall accommodate a 3ӯ marine
grade speaker rated for outdoor use. Grille shall be secured
with (4) Torx # screws for accessibility. Mounting provisions as
shown. Speaker, mounting hardware and wiring by others.
(4X) Ø .25
(4) Torx #6-32
Ø 3.50
C
26.6”
(676 mm)
Kim Lighting reserves the right to change specifications without notice.
© 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Dec. 15, 2017
| 5 |
Pavilion™ Bollard
PA7R
kl_pa7r_spec.pdf
SPECIFICATIONS
Housing:
DMX:
• Castings shall be low copper aluminum alloy
die-cast.
• 6 wires: Red (DMX+), Yellow (DMX-), Brown
(DMX Ground), Black (Voltage), White
(common), and Green (Ground)
• Gaskets shall be molded silicone to prevent
harmful ingress to the lamp and driver
compartments.
• Optical system shall be IP66 rated.
• Single DMX universe with six slots/addresses of
virtual control which are pre-programmed at
the factory:
DMX slot/address 1 = red
Shaft:
DMX slot/address 2 = blue
• Aluminum shaft(s) shall be .125” thick extruded
aluminum 6061 alloy.
DMX slot/address 3 = green
• Concrete shaft(s) shall conform to current
specifications for “Portland Cement.” ASTM
C150, Type I or II. Aggregates shall meet current
requirements of “Specifications for Concrete
Aggregates,” ASTM C33. Water shall be clean
and free from deleterious amounts of silt, oil,
acids, alkalies or organic materials. Wire for
reinforcement shall conform to ASTM A185.
Steel for lugs and plates shall conform to ASTM
A36, or A283 grade D.
DMX slot/address 5 = X tilt, a 127 means do nothing, a value between 1-63 means left, a
value between 192-254 means right
• Concrete shaft(s) shall be medium sand-blasted
with anti-graffiti sealer and material color shall
be integral to the concrete mix.
• Concrete shaft(s) shall be cured to allow for
completion of the hydration process, and result
in a 28 day compressive strength of not less
than 4,500 psi.
• Concrete shaft(s) shall be cast from fiberglass
molds used to insure uniform parts. Mold parting
lines maybe slightly visible in finished parts.
Optics:
• U0 configurations shall have an optically clear
flat tempered glass lens, all other configurations
shall have either an optically clear or high
transmission diffused acrylic lens.
• Maximum surge current shall be 20KA and shall
fail open at end of life to prevent harm to the
electrical components from uncontrolled or
excess incoming power
DMX slot/address 4 = white
DMX slot/address 6 = Y tilt, a 127 means do
nothing, a value between 1-63 means up, a
value between 192-254 means down
• Fully DMX RDM compatable.
Controls
• Aluminum shaft configurations shall have a
mounting plate shall be able to be rotated 20°
in either direction during installation for aiming
adjustment.
• Concrete shaft configurations shall have four
steel mounting tabs for installation on four #" x
10" + 2" zinc electroplated L-hook anchor bolts.
Each anchor bolt is supplied with two nuts, two
washers, and a rigid pressed board template.
• Concrete shaft configurations shall be palletized
with adequate hold-downs to prevent load
movement in transit.
Finish:
• Fade and abrasion resistant, electrostatically
applied, thermally cured, triglycidal isocyanurate
(TGIC) polyester powder coat.
• Standard fixtures dimming range shall be
from 10% to 100% and be compatible with
0-10V, user-defined, control devices. (Wiring
illustration)
• Standard colors include (BL) Black, (DB) Dark
Bronze, (GT) Graphite, (PS) Platinum Silver, (LG)
Light Gray, (TT) Titanium, (WH) White, and (CC)
Custom Color (Include RAL#).
• Optional motion sensor shall be capable of
detecting motion 360° around the bollard.
When no motion is detected for the specified
time, the sensor wattage to factory preset
level, reducing the light level accordingly.
When motion is detected by the sensor, the
bollard shall return to full wattage and full light
output. Please contact KIM Lighting if project
requirements vary from standard configuration.
Certifications and Listings:
• Pavilion may be specified with SiteSync™ wireless
control system for reduction in energy and
maintenance costs while optimizing light quality
24/7. For more details, see ordering information
or visit: www.hubbelllighting.com/sitesync
Standard Input Black (+)
White (-)
Green (GND)
• Driver shall be rated for -40°C environment
Bluetooth:
shall to be installed with an included template.
Nuts and washers shall be provided to level and
secure the mounting plate to the anchor bolts.
Gray Dimming Lead (-)
Fixture
Housing
• UL 1598 Standard for wet locations for Luminaires.
• UL 8750 Standard for Safety for Light Emitting
Diode (LED) Equipment for use in Lighting Products.
• CSA C22.2#250.0 Luminaires.
• RoHS compliant.
• IP66 rated.
• IDA approved, 3000K and warmer CCTs only.
Caution:
• Fixtures must be grounded in accordance with
national, state and/or local electrical codes, Failure
to do so may result in serious personal injury.
Warranty:
• For full warranty see http://www.hubbelllighting.
com/resources/warranty
Purple Dimming Lead (+)
1 mA Max
• The Integral module shall enable the adjustment
of the Luminous Accent to dim or change color
to the desired setting when paired with Hubbell
Lighting RGBW Remote App via celluar/tablet
device.
Electrical:
• The integral module shall be compatible with
Bluetood Low Energy (BLE) or Bluetooth Smart
mobile devices operating on iOS8 or Android
Gingerbread operating systems or newer.
• Battery Backup shall have an operating range
of -20oC to 50oC with a typical recharge time
of 32 hours.
• High temperature fuse holders factory installed
inside the fixture housing. Fuse is included.
Installation
• Aluminum shaft configurations shall have four
3/8” x 10” x 2” zinc plated L-hook anchor bolts
DMX
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Kim Lighting is under license. Other
trademarks and trade names are those of their respective
owners. Apple, the Apple logo, iPad, iPhone, and iPod
Touch are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple
Inc. Google Play is a trademark of Google Inc.
Kim Lighting reserves the right to change specifications without notice.
© 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. Dec. 15, 2017
| 6 |
Download PDF
Similar pages