Instruction Manual - German Light Products

Instruction Manual
from software version: v1.47
support@glp.de
www.glp.de
GLP  German Light Products GmbH
Notes:
Impression X4 XL manual (v1.1)
from software version: v1.47
2
GLP  German Light Products GmbH
Table of contents
1
Description of Device.............................................................................................. 4
2
Safety Instructions .................................................................................................. 5
3
Mounting .................................................................................................................. 7
3.1.1 Mounting on the Floor (upright)............................................................ 8
3.1.2 Mounting in hanging position (Head down) .......................................... 9
3.2 Securing the Fixture .......................................................................................... 9
3.3 Connections .................................................................................................... 10
3.3.1 Power Supply..................................................................................... 10
3.3.2 DMX ................................................................................................... 10
4
The Menu Field ...................................................................................................... 10
5
DMX Channel Selection (DMX Protocol) ............................................................. 13
5.1 Normal-Mode (26 DMX channels) .................................................................. 13
5.2 Compress-Mode (16 DMX channels) .............................................................. 16
5.3 High Resolution/Extended-Mode (27 DMX Channels) .................................... 18
6
Maintaining and Cleaning ..................................................................................... 21
6.1 Safety regulations ........................................................................................... 21
6.2 Maintenance and Interval (rule-of-thumb) ....................................................... 21
7
Technical Specifications ...................................................................................... 22
8
Dimensions ............................................................................................................ 23
9
Index ....................................................................................................................... 24
Impression X4 XL manual (v1.1)
from software version: v1.47
3
GLP  German Light Products GmbH
1 Description of Device
1. Moving head (actively and
passively cooled)
2. Arm with various cooling
vents
3. LCD-Display/Menu (data
entry)
4. Base with various
connectors and Camlock
mounting system
5. DMX- Output (5 pin)
6. DMX- Output (3 pin)
7. Micro-fuse: 5 x 20mm, T12A
8. Power Switch
9. Neutrik Powercon (Mains power
input)
10. Blank panel (primed for Ethernet)
11. DMX- Input (3 pin)
12. DMX- Input (5 pin)
13. 2x Safety wire points
Note: Only connect one cable to the
DMX Input / Output at the same time!
Impression X4 XL manual (v1.1)
from software version: v1.47
4
GLP  German Light Products GmbH
2 Safety Instructions
The IMPRESSION X4 XL is a High-Tech Product. To guarantee
a smooth operation, it is necessary to respect the following rules.
The manufacturer of this device will not take responsibility for
damages through any disregard of the information provided in
this manual. Warranty claims also will be voided in the case that
the fixture housing is opened.
Never look directly into the beam of light or into one of the
LEDs. Attention: LED Class 2M can cause injuries of your eyes
even without optical instruments in front of them or within a
distance of less than 0.5m and short exposure time.
Hence: Avoid direct radiation into your eyes!
WARNING:
Never let optical parts come in contact with alcohol,
solvents or similar cleaners.
1.
Before powering on the fixture, make sure that the fixtures fans and air inlets
are clean and not blocked.
2.
Ensure that the fixture head can rotate unhindered throughout its complete
range of pan and tilt movement. A safety distance of at least 0.5 m must be
maintained between the fixture and any easily inflammable material.
3.
Attention! Don’t touch the fixture during the operation. This can cause injuries
and/or damages.
4.
The fixture doesn’t contain any user serviceable parts. Opening the
fixture will void all warranties.
5.
It is necessary to wait at least 15 minutes after disconnecting the mains power
before handling the fixture. Pay attention to possible hot parts.
6.
To ensure safe operation, follow also the Installation guide described in the
chapter below. Operating the IMPRESSION X4 XL without suitable safety aids
like Safety cables or clamps/hooks can increase the risk of an accident and
must be avoided.
7.
Repair, maintenance, and installation work shall be done by qualified or GLP
certified staff only. You need to pay attention to the common rules of
technology that are not explicitly mentioned in this manual.
8.
Use only original GLP spare parts. Any structural modification of the system
will terminate all warranty claims.
9.
Please keep this instruction manual for future reference.
Impression X4 XL manual (v1.1)
from software version: v1.47
5
GLP  German Light Products GmbH
Important Safety Information
The IMPRESSION X4XL fixture from GLP is fitted with a number of planoconvex lenses in a highly efficient collimator cluster. This type of lens can act as
a strong magnifying glass.
If the rays from a strong light source (such as the sun or another lighting fixture)
are directed towards the front of any of these fixtures, then internal damage
may occur. In a worst case scenario with a high power light source this can
happen very quickly, damaging the fixture internally, potentially melting
components or causing an internal fire within seconds.
In order to avoid these possible problems please adhere to the following
requirements:
Do not expose the front of a fixture to direct sunlight or any other
strong light sources.
For outdoor applications during daylight make sure that the front
face of any fixture is either shielded or points away from the sun,
even when fixtures are not in use.
Do not modify the front glass or lenses of any fixture.
These requirements have to be followed regardless of whether a fixture is
powered on or off as the magnifying effect is an optical effect and therefore
independent from the (electrical) state of the fixture.
Especially when working with high powered beam-lights; extreme caution and
observance of these safety instructions is mandatory.
Impression X4 XL manual (v1.1)
from software version: v1.47
6
GLP  German Light Products GmbH
Should you have any questions about the operation of your fixture then please
contact your local GLP office, or their authorized distributor, a list of which can
be found at www.glp.de.
3 Mounting
The IMPRESSION X4XL is fully operational whether it hangs or is mounted to
the wall. It can also be operated while standing on the floor. Keep a safety
distance of min. 0.5 m towards any easily inflammable materials (decoration
etc.).
Pay attention to the regulations of: BGV C1 (former VBG 70)
and DIN VDE 0711-217.
The installation shall be done by qualified staff only.
For the various mounting positions of the IMPRESSION X4XL (standing on the
floor, sideways or hanging) different accessories kits are available. Through this
a safe and firm installation is assured. You'll find dedicated connectors on the
bottom side of the fixture which should be used. In addition the base is marked
with a FRONT arrow allowing consistent orientation during installation.
Impression X4 XL manual (v1.1)
from software version: v1.47
7
GLP  German Light Products GmbH
3.1.1 Mounting on the Floor (upright)
To operate the IMPRESSION X4XL in an upright position, please use
the dedicated tri-legged floor stand supplied with your fixture. It is fixed
to the base of the fixture with fasteners called Camlock quick-release
connectors. Insert the two fasteners and turn each 90° to lock them. Do
the opposite to release them again. On both sides you'll find eyelets to
pull though a fixing strap. This allows for additional bracing of the fixture.
Impression X4 XL manual (v1.1)
from software version: v1.47
8
GLP  German Light Products GmbH
3.1.2 Mounting in hanging position (Head down)
To operate the IMPRESSION X4XL in a hanging position two (2) omega
brackets can be mounted directly to the bottom of the base using the
four (4) Camlock connectors.
Alternatively two half-couplers (clamps) can be mounted directly to the
bottom side of the fixture using M10x16 mm thread bolts.
Attention: Never use a longer bolt as this may damage the interior
of the fixture.
3.2
Securing the Fixture
Regardless of the mounting method of the IMPRESSION X4XL you'll have to
use a stipulated safety wire. Attach the safety wire through one of the two holes
provided on the base of the fixture and connect it to the primary support
structure. Pay attention to a safe and proper fastening. The safety cable must
comply with EN 60598-2-17 Section 17.6.6 and be capable of bearing a static
suspended load that is ten times the weight of the fixture and all installed
accessories.
Impression X4 XL manual (v1.1)
from software version: v1.47
9
GLP  German Light Products GmbH
3.3
Connections
3.3.1 Power Supply
~100-240 Volt AC, 50-60 Hz, earth contact type plug - Powercon
Connected load 1200 VA (W)
T12A (micro-fuse 5x20mm)
Please see printing on the case for the right electronic supply!
Disconnect from the mains supply for changing the fuse and use
only the above described micro-fuse type.
3.3.2 DMX
USITT DMX-512 Standard input/output in 3/5 pin connectors.
Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+] / Pin 4&5 N.C.
The DMX- Addressing starts at the DMX- Address [001].
4 The Menu Field
You’ll find the control board on the side part of the arm. It allows you
to make all necessary adjustments of the IMPRESSION X4XL. With
the Mode-key you get into the main menu. Afterwards you can navigate through the menu with the Up/Down-keys. Push the Enter-key
to get in the next menu level or to confirm your settings. Make them
and set functions ON/OFF with the Up/Down-keys. Confirm and save
it with the Enter-key (the display shows OK). Push the Mode-key to
cancel the entry and go back to the main menu.
To lock or unlock the keys of the menu field press Mode+Enter+Up simultaneously.
 DOWN - UP 
 MODE - ENTER 
Level1
DMX Start
Address 001
Level 2
Special
Manual DMX
Level 3
Level 4
Remark
Set the DMX start address
Manual control of all fixture functions
Pan
Pattern
Byte 3
Pattern
Byte 2
Pattern
Byte 1
Manual control for Pan (X-movement)
Manual control for Pattern Byte 3 LED 17 -19
Manual control for Pattern Byte 2 LED 9 - 16
Manual control for Pattern Byte 1 LED 1 - 8
Pattern
Manual control for Pattern channel / bank
Zoom
Manual control for Zoom
Speed
Movements
Manual control for Pan/Tilt movements
Impression X4 XL manual (v1.1)
from software version: v1.47
10
GLP  German Light Products GmbH
Pan/Tilt
Movements
Manual control for Pan/Tilt movements
Special
White
Temperature
Manual control for Color temperature
Dimmer
Manual control for Dimmer
Shutter
Manual control for Shutter
White
Manual control for White
Blue
Manual control for blue
Green
Manual control for green
Red
Manual control for red
Color Wheel
Manual control for the color wheel
Tilt
Manual control for Tilt (Y-movement)
Key code
xxxx
Display
Contrast
PWM Frequ. Adj.
Use the code for entering the calibration menu
(for authorized persons only)
Pan Offset
Calibration for Pan-Offset
Tilt Offset
Calibration for Tilt-Offset
 DOWN - UP 
Adjust
Adjustment for the Display contrast
Changes PMW frequency
LED adjust
White adjust
Adjust intensity for red channel
red
White adjust
Adjust intensity for blue channel
blue
White adjust
Adjust intensity for green channel
green
Clear
EEPROM
Erase EEPROM memory
Diagnose
Diagnose fixture functions
DMX Image
Set image if
DMX off
Save image
in memory
DMX input
Monitor
Activates a stored scene if DMX is off
Stores the scene currently sent to the unit
Indicates the presently received DMX signal per
DMX channel
Pan
Instantaneous value for Pan
Tilt
Instantaneous value for Tilt
Pattern
Byte 3
Pattern
Byte 2
Pattern
Byte 1
Impression X4 XL manual (v1.1)
Instantaneous value for Pattern Byte 3
Instantaneous value for Pattern Byte 2
Instantaneous value for Pattern Byte 1
from software version: v1.47
11
 DOWN - UP 
GLP  German Light Products GmbH
Pattern
Instantaneous value for Pattern channel / bank
Zoom
Instantaneous value for Zoom
Speed
Movements
Pan/Tilt
Movements
Speed adjustment for Pan/Tilt movements 
see item below
Special
Instantaneous value for Special
White
Temperature
Adjustment of the color temperature for WHITE
Dimmer
Instantaneous value for Dimmer
Shutter
Instantaneous value for Shutter
White
Instantaneous value for White
Blue
Instantaneous value for Blue
Green
Instantaneous value for Green
Red
Instantaneous value for Red
Color Wheel
Instantaneous value for Color Mixing unit
Set DMX
Mode
Instantaneous value for Pan/Tilt movements
Select the desired DMX Mode
Compressed
Mode
Normal
Mode
High-Res.
Mode
Fixture works in "Compressed" mode  see also
section 5 unterhalb
Fixture works in "Normal" mode  see also
section 5 unterhalb
Fixture works in "High Resolution" mode  see
also section 5 unterhalb
Position
feedback
Switch automatic position feedback ON/OFF
Reverse Pan
Invert Pan movements: ON/OFF
Reverse Tilt
Invert Tilt movements: ON/OFF
Reset
RESET and new calibration for all functions
Impression X4 XL manual (v1.1)
from software version: v1.47
12
GLP  German Light Products GmbH
5 DMX Channel Selection (DMX Protocol)
5.1
Normal-Mode (26 DMX channels)
Channel
Function
Time and Value
1) PAN High
2) PAN Low
3) Tilt High
4) Tilt Low
5) Color
(fixed)
Pan coarse
Pan fine
Tilt coarse
Tilt fine
Colors adjustable via RGB
1)
Color 01 - Red
1)
Color 02 - Amber
1)
Color 03 - Warm Yellow
1)
Color 04 - Yellow
1)
Color 05 - Green
1)
Color 06 - Turquoise
1)
Color 07 - Cyan
1)
Color 08 - Blue
1)
Color 09 - Lavender
1)
Color 10 - Malve
1)
Color 11 - Magenta
1)
Color 12 - Pink
White - CTO
White
White - CTB
2)
Rainbow Effect Stop
3)
Rainbow Effect
Random colors
Color mixing system - Red
Color mixing system - Green
Color mixing system - Blue
Color mixing system - White
Shutter closed
Shutter pulse random
Fade on, snap off (random patterns)
Snap on, fade off (random patterns)
Fade on, fade off (random patterns)
Strobe random
Strobe effect slow - fast
Shutter open
Intensity
No CTO
Continuous color temperature
correction
Pattern Block 1  See channel 17
Pattern Block 2  See channel 17
Pattern Block 3  See channel 17
Pattern Block 4  See channel 17
Pattern Block 5  See channel 17
Pattern Block 6  See channel 17
Pattern Block 7  See channel 17
Pattern Block 8  See channel 17
Pattern Block 9  See channel 17
Pattern Block 10  See channel 17
0° - 660°
6) Red
7) Green
8) Blue
9) White
10) Shutter
11) Dimmer
12) CTO
13) Special
Impression X4 XL manual (v1.1)
0° - 260°
3200K
5600K
7200K
slow - fast
slow - fast
0 - 100%
0 - 100%
0 - 100%
0 - 100%
slow – fast
slow – fast
slow – fast
slow – fast
5s - 0.1s
1 Hz - 10 Hz
0 - 100%
Applicable for ALL
colors
from software version: v1.47
DMX
HEX
%
0..255
0..255
0..255
0..255
0..7
8..15
16..23
24..31
32..39
40..47
48..55
56..63
64..71
72..79
80..87
88..95
96..103
104..111
112..119
120..127
128
129..223
224..255
0..255
0..255
0..255
0..255
0..15
16..47
48..79
80..111
112..143
144..199
200..239
240..255
0..255
0..7
00..FF
00..FF
00..FF
00..FF
00..07
08..0F
10..17
18..1F
20..27
28..2F
30..37
38..3F
40..47
48..4F
50..57
58..5F
60..67
68..6F
70..77
78..7F
80
81..DF
E0..FF
00..FF
00..FF
00..FF
00..FF
00..0F
10..2F
30..4F
50..6F
70..8F
90..C7
C8..EF
F0..FF
0..FF
0..07
0..100
0..100
0..100
0..100
0..2..5
3..5.5
6..8.5
9..12.5
13..15.5
16..18.5
19..21.5
22..24.5
25..27.5
28..30.5
31..34.5
35..37.5
38..40.5
41..43.5
44..46.5
47..49.5
50
51..88
89..100
0..100
0..100
0..100
0..100
0..5.5
6..18.5
19..31
32..43
44..56
57..77
78..94
95..100
0..100
0..2.5
8..255
08..FF
3..100
0..3
4..7
8..11
12..15
16..19
20..23
24..27
28..31
32..35
36..39
00..03
04..07
08..0B
0C..0F
10..13
14..17
18..1B
1C..1F
20..23
24..27
0..1
2..3
3..4
5..6
6..7
8..9
9..10
11..12
12..13
14..15
13
GLP  German Light Products GmbH
Channel
Function
Time and Value
Enable Animation
 use channel 17 to select
 use channel 18 so set step
 use channel 19 to start / for speed
Set Dimmer to soft mode
Change PWM frequency
Set Maximum Zoom to 247
> 1 sec
Set Maximum Zoom to 255
> 1 sec
Set Zoom to normal
> 1 sec
Set Zoom to inverted
> 1 sec
RESET
> 1 sec
14) MoveNo macros
ment
Movement Size
Phase
Use "Speed" to adjust
macros PAN
1
0°
1
90°
1
180°
1
270°
PAN
2
0°
2
90°
2
180°
2
270°
PAN
3
0°
3
90°
3
180°
3
270°
PAN
4
0°
4
90°
4
180°
4
270°
TILT
size / phase see PAN
PAN / TILT
size / phase see PAN
PAN / TILT (inverse)
size / phase see PAN
Circle
size / phase see PAN
Circle (inverse)
size / phase see PAN
Lying eight
size / phase see PAN
Random movement
size / phase see PAN
15) Pan / Tilt Pan/Tilt movement speed from
Speed
controller
Pan/Tilt, slow – fast
Use this channel for the speed of the
macros on channel 14.
16) Zoom
Wide (flood) - narrow (spot)
50° - 7°
17) Pattern /
No pattern
Animation
4) 5)
Pre-defined patterns / animations
See Special Channel 13
Activates direct access to LED Lenses See Channel 18 - 26
18) Pattern
4)
Direct activation of lenses 1 thru 8
Activation in binary style
4)
Section 1
19) Pattern
5)
Direct activation of lenses 9 thru 16
Activation in binary style
5)
Section 2
20) Pattern
Direct activation of lenses 17 thru 19
Activation in binary style
Section 3
21) Pattern
Direct activation of lenses 20 thru 27
Activation in binary style
Section 4
Impression X4 XL manual (v1.1)
from software version: v1.47
DMX
HEX
%
80..83
50..53
31..32
84..87
54..57
33..34
100..200 64..C8 40..78
208..211 D0..D3 82..83
212..215 D4..D7 84..85
216..219 D8..DB 85..86
220..223 DC..DF 86..87
250..255 FA..FF 98..100
0
00
0
01..01
02..03
04..05
06..07
08..09
10..11
12..13
14..15
16..17
18..19
20..21
22..23
24..25
26..27
28..29
30..31
32..63
64..95
96..127
128..159
160..191
193..223
224..255
01..01
02..03
04..05
06..07
08..09
0A..0B
0C..0D
0E..0F
11..11
12..13
14..15
16..17
18..19
1A..1B
1C..1D
1E..1F
20..3F
40..5F
60..7F
80..9F
A0..BF
C0..DF
E0..FF
0.5
1.0
1.7
2.5
3.3
4.1
4.9
5.7
6.5
7.3
8.0
8.8
9.6
10.4
11.2
12
13..25
26..37
38..50
51..62
63..75
76..87
88..100
0..1
00..01
0..0..5
02..255
02..FF
1..100
0…255
00…FF
0…100
0..2
00..02
0..1
03..253 03..FD
254..255 FE..FF
0…255 00…FF
2..99
100
0…100
0…255
00…FF
0…100
0…255
00…FF
0…100
0…255
00…FF
0…100
14
GLP  German Light Products GmbH
Channel
22) Pattern
Section 5
23) Pattern
Section 6
24) Pattern
Section 7
25) Pattern
Section 8
26) Pattern
Section 9
Function
Time and Value
Direct activation of lenses 28 thru 35
Activation in binary style
Direct activation of lenses 36 thru 38
Activation in binary style
Direct activation of lenses 39 thru 46
Activation in binary style
Direct activation of lenses 47 thru 54
Activation in binary style
Direct activation of lens 55
Activation in binary style
Impression X4 XL manual (v1.1)
from software version: v1.47
DMX
HEX
%
0…255
00…FF
0…100
0…255
00…FF
0…100
0…255
00…FF
0…100
0…255
00…FF
0…100
0…255
00…FF
0…100
15
GLP  German Light Products GmbH
5.2
Compress-Mode (16 DMX channels)
Channel
Function
Time and Value
1) PAN High
2) PAN Low
3) Tilt High
4) Tilt Low
5) Color
(fixed)
Pan coarse
Pan fine
Tilt coarse
Tilt fine
Colors adjustable via RGB
1)
Color 01 - Red
1)
Color 02 - Amber
1)
Color 03 - Warm Yellow
1)
Color 04 - Yellow
1)
Color 05 - Green
1)
Color 06 - Turquoise
1)
Color 07 - Cyan
1)
Color 08 - Blue
1)
Color 09 - Lavender
1)
Color 10 - Mauve
1)
Color 11 - Magenta
1)
Color 12 - Pink
White – CTO
0° - 660°
White
White – CTB
0° - 260°
Color temperature
3200K
Color temperature
5600K
Color temperature
7200K
2)
6) Red
7) Green
8) Blue
9) White
10) Shutter
11) Dimmer
12) Zoom
13) Special
Rainbow Effect Stop
3)
Rainbow Effect
Rainbow Effect, random colors
Color mixing system - Red
Color mixing system - Green
Color mixing system - Blue
Color mixing system - White
Shutter closed
Shutter pulse random
Fade on, snap off (random patterns)
Snap on, fade off (random patterns)
Fade on, fade off (random patterns)
Strobe random
Strobe effect slow – fast
Shutter open
Intensity
Wide (flood) - narrow (spot)
Pattern Block 1  See channel 14
Pattern Block 2  See channel 14
Pattern Block 3  See channel 14
Pattern Block 4  See channel 14
Pattern Block 5  See channel 14
Pattern Block 6  See channel 14
Pattern Block 7  See channel 14
Pattern Block 8  See channel 14
Pattern Block 9  See channel 14
Pattern Block 10  See channel 14
Impression X4 XL manual (v1.1)
slow - fast
slow - fast
0 - 100%
0 - 100%
0 - 100%
0 - 100%
slow – fast
slow – fast
slow – fast
slow – fast
5s - 0.1s
1 Hz - 10 Hz
0 - 100%
50° - 7°
from software version: v1.47
DMX
HEX
%
0..255
0..255
0..255
0..255
0..7
8..15
16..23
24..31
32..39
40..47
48..55
56..63
64..71
72..79
80..87
88..95
96..103
104..111
00..FF
00..FF
00..FF
00..FF
00..07
08..0F
10..17
18..1F
20..27
28..2F
30..37
38..3F
40..47
48..4F
50..57
58..5F
60..67
68..6F
0..100
0..100
0..100
0..100
0..2.5
3..5.5
6..8.5
9..12.5
13..15.5
16..18.5
19..21.5
22..24.5
25..27.5
28..30.5
31..34.5
35..37.5
38..40.5
41..43.5
112..119
70..77
44..46.5
120..127
78..7F
47..49.5
128
80
50
129..223 81..DF 51..88
224.255 E0..FF 89..100
0..255
00..FF
0..100
0..255
00..FF
0..100
0..255
00..FF
0..100
0..255
00..FF
0..100
0..15
00..0F
0..5.5
16..47
10..2F 6..18.5
48..79
30..4F
19..31
80..111 50..6F
32..43
112..143 70..8F
44..56
144..199 90..C7 57..77
200..239 C8..EF 78..94
240..255 F0..FF 95..100
0..255
0..FF
0..100
0…255 00…FF 0…100
0..3
00..03
0..1
4..7
04..07
2..3
8..11
08..0B
3..4
12..15
0C..0F
5..6
16..19
10..13
6..7
20..23
14..17
8..9
24..27
18..1B
9..10
28..31
1C..1F 11..12
32..35
20..23
12..13
36..39
24..27
14..15
16
GLP  German Light Products GmbH
Channel
Function
Time and Value
Enable Animation
 use channel 14 to select
 use channel 15 so set step
 use channel 16 to start / for speed
Set Dimmer to soft mode
Change PWM frequency
Set Maximum Zoom to 247
> 1 sec
Set Maximum Zoom to 255
> 1 sec
Set Zoom to normal
> 1 sec
Set Zoom to inverted
> 1 sec
RESET
> 1 sec
14) Pattern /
Animation
No pattern
Pre-defined patterns / animations
4)
4)
15) A-Step
Animation step
5)
5)
16) A-Speed
Animation start / speed
Impression X4 XL manual (v1.1)
4) 5)
See Special Channel 13
See Special Channel 13
See Special Channel 13
from software version: v1.47
DMX
HEX
%
80..83
50..53
31..32
84..87
54..57
33..34
100..200 64..C8 40..78
208..211 D0..D3 82..83
212..215 D4..D7 84..85
216..219 D8..DB 85..86
220..223 DC..DF 86..87
250..255 FA..FF 98..100
0..2
00..02
0..1
03..253
00..255
00..255
03..FD
00..FF
00..FF
2..99
0..100
0..100
17
GLP  German Light Products GmbH
5.3
High Resolution/Extended-Mode (27 DMX Channels)
Channel
Function
Time and Value
1) PAN High
2) PAN Low
3) Tilt High
4) Tilt Low
5) Red High
6) Red Low
7) Green High
8) Green Low
9) Blue High
10) Blue Low
11) White High
12) White Low
13) Shutter
Pan coarse
Pan fine
Tilt coarse
Tilt fine
Color mixing system – Red
Color mixing system – Red-Low
Color mixing system – Green
Color mixing system – Green-Low
Color mixing system – Blue
Color mixing system – Blue-Low
Color mixing system – White
Color mixing system – White-Low
Shutter closed
Shutter pulse random
Fade on, snap off (random patterns)
Snap on, fade off (random patterns)
Fade on, fade off (random patterns)
Strobe random
Strobe effect slow – fast
Shutter open
Intensity coarse
0° - 660°
14) DimmerHigh
15) DimmerLow
16) Zoom
17) Special
18) Pattern
19) Pattern
4)
Section 1
DMX
HEX
%
0..255
0..255
0..255
0..255
0..255
0..255
0..255
0..255
0..255
0..255
0..255
0..255
0..15
16..47
48..79
80..111
112..143
144..199
200..239
240..255
0..255
00..FF
00..FF
00..FF
00..FF
00..FF
00..FF
00..FF
00..FF
00..FF
00..FF
00..FF
00..FF
00..0F
10..2F
30..4F
50..6F
70..8F
90..C7
C8..EF
F0..FF
0..FF
0..100
0..100
0..100
0..100
0..100
0..100
0..100
0..100
0..100
0..100
0..100
0..100
0..5.5
6..18.5
19..31
32..43
44..56
57..77
78..94
95..100
0..100
Intensity fine
0..255
0..FF
0..100
Wide (flood) - narrow (spot)
50° - 7°
Pattern Block 1  See channel 18
Pattern Block 2  See channel 18
Pattern Block 3  See channel 18
Pattern Block 4  See channel 18
Pattern Block 5  See channel 18
Pattern Block 6  See channel 18
Pattern Block 7  See channel 18
Pattern Block 8  See channel 18
Pattern Block 9  See channel 18
Pattern Block 10  See channel 18
Enable Animation
 use channel 18 to select
 use channel 19 so set step
 use channel 20 to start/for speed
Set Dimmer to soft mode
Change PWM frequency
Set Maximum Zoom to 247
> 1 sec
Set Maximum Zoom to 255
> 1 sec
Set Zoom to normal
> 1 sec
Set Zoom to inverted
> 1 sec
RESET
> 1 sec
No pattern
4) 5)
Pre-defined patterns / animations
See Special Channel 17
Activates direct access to LED
Lenses
0…255
0..3
4..7
8..11
12..15
16..19
20..23
24..27
28..31
32..35
36..39
80..83
00…FF
00..03
04..07
08..0B
0C..0F
10..13
14..17
18..1B
1C..1F
20..23
24..27
50..53
0…100
0..1
2..3
3..4
5..6
6..7
8..9
9..10
11..12
12..13
14..15
31..32
Direct activation of lenses 1 thru 8
Impression X4 XL manual (v1.1)
4)
0° - 260°
0 - 100%
0 - 100%
0 - 100%
0 - 100%
slow – fast
slow – fast
slow – fast
slow – fast
5s - 0.1s
1 Hz - 10 Hz
0 - 100%
Activation in binary style
from software version: v1.47
84..87
54..57
33..34
100..200 64..C8 40..78
208..211 D0..D3 82..83
212..215 D4..D7 84..85
216..219 D8..DB 85..86
220..223 DC..DF 86..87
250..255 FA..FF 98..100
0..2
00..02
0..1
03..253 03..FD
2..99
254..255
FE..FF
100
0…255
00…FF
0…100
18
GLP  German Light Products GmbH
Channel
Function
20) Pattern
5)
Section 2
21) Pattern
Section 3
22) Pattern
Section 4
23) Pattern
Section 5
24) Pattern
Section 6
25) Pattern
Section 7
26) Pattern
Section 8
27) Pattern
Section 9
1)
Direct activation of lenses 9 thru 16
Time and Value
5)
Activation in binary style
Direct activation of lenses 17 thru 19 Activation in binary style
Direct activation of lenses 20 thru 27 Activation in binary style
Direct activation of lenses 28 thru 35 Activation in binary style
Direct activation of lenses 36 thru 38 Activation in binary style
Direct activation of lenses 39 thru 46 Activation in binary style
Direct activation of lenses 47 thru 54 Activation in binary style
Direct activation of lens 55
Activation in binary style
DMX
HEX
%
0…255
00…FF
0…100
0…255
00…FF
0…100
0…255
00…FF
0…100
0…255
00…FF
0…100
0…255
00…FF
0…100
0…255
00…FF
0…100
0…255
00…FF
0…100
0…255
00…FF 0…100
The predefined colors can be used as start-colors for the Rainbow effect. Please select first a
desired start-color before you activate the rainbow effect. All IMPRESSION X4XL will then start
from that color and will execute the rainbow effect synchronously. Different IMPRESSION
X4XL can have different start-colors but will still execute the rainbow effect synchronously. If you
choose a color different from the ones marked with
1)
in the tables above the rainbow start-color
will be red.
2)
Rainbow-effect Stop will pause this function. After resuming the rainbow-effect will be continued
from the current color.
3)
The Rainbow-effect will run synchronously only if started from one of the predefined colors (see
also
4)
1)
before).
If the Animation mode is activated through Special Channel set to DMX = 80..83 then the
Function of this Channel is:
Animation step
00..255
00..FF
0..100
Use this Chanel to select the starting point of the animation.
5)
If the Animation mode is activated through Special Channel set to DMX = 80..83 then the
Function of this Channel is:
Animation start / speed
00..255
00..FF
0..100
Use this Chanel to start the animation by setting the speed to run it.
Impression X4 XL manual (v1.1)
from software version: v1.47
19
GLP  German Light Products GmbH
Locking and unlocking the Control Panel
Please lock and unlock the control panel by pressing the menu keys MODE & ENTER & UP at the
same time.
Additional Display Indications
As a default you'll find the following additional information in the first row of the LCD display:
Vxx/xx/xx/xx/x
N = Normal Mode / C = Compressed Mode / H = High Res. Mode
N = Tilt normal / I = Tilt inverted
N = Pan normal / I = Pan inverted
LED driver version
Main CPU version
Impression X4 XL manual (v1.1)
from software version: v1.47
20
GLP  German Light Products GmbH
6 Maintaining and Cleaning
The IMPRESSION X4XL is a fixture of very low maintenance. It is only necessary to
clean the air inlets and outlets as well as the optical LED lenses from time to time.
For safe operation it is absolutely essential that the fixture is kept clean and that dust,
dirt and smoke-fluid residues must not build up on, or within the fixture. Otherwise the
fixture's light-output will be significantly reduced or damages can occur. Regular
cleaning will not only ensure the maximum light-output, but will also allow the fixture
to operate reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended to clean the lenses.
Attention:
Under no circumstances should alcohol or solvents be
used to clean the lenses!
6.1
Safety regulations
Pull out the mains power plug!
Wait min. 15 minutes after disconnecting power to allow the fixture to cool
down.
6.2
Maintenance and Interval (rule-of-thumb)
The contamination of the fixture depends on the environment details. Hence no
general guidelines can be given. The intervals given below are only suggestions
from our experience.
Position
Interval
In this way
LED reflector and optical system
weekly
soft brush /lint-free cloth
Fan and air channel
monthly
vacuum cleaner, airbrush, etc.
Attention:
Never let optical parts come into contact with oil, fat, alcohol or similar
solvents.
Before running the fixture wait until all parts are dry.
Never touch lenses with bare fingers.
Impression X4 XL manual (v1.1)
from software version: v1.47
21
GLP  German Light Products GmbH
7 Technical Specifications
Power supply
Power consumption
1200 VA (Watt)
Power Input
~100-240 V AC, 50-60 Hz (wide range input)
Fuse protection
Micro-fuse 5x20 mm, T12A
Operational Parameters
Max. Ambient
5° - 45°C (integrated overheating switch)
Temperature
Mounting Position
Any (see relevant chapter)
Lighting System - Additive Color mixing
LED Type
55 x Osram Ostar RGBW multi-chip
Lifetime
50,000 h
Wavelength optimized for maximum presentable color space
Optical System
Full RGBW / High efficient Collimator cluster
Shutter / Dimmer (8/16 Bit)
Strobe- Effect with variable speed between 1 - 10 flashes per second, Random-Strobe, PulseEffects
Continuous Dimmer 0 - 100%
Zoom
7 to 50 degree continuous zoom
Optical Patterns
Several hundred pre-defined beam patterns with direct access and manipulation
DMX Control
Standard USITT DMX-512, 3/5 pin XLR: [+]=Pin 3 / [-]=Pin 2 / [Ground]=Pin 1 / Pin 4&5 N.C.
The DMX- Addressing starts at the DMX channel [001].
Pan / Tilt (8/16 Bit)
Pan- movement
660° in min. 3,2 seconds (Position Feedback)
Tilt- movement
260° in min. 1,5 seconds (Position Feedback)
Weights and Measures
Width of the base
521 mm
Length of the base
361 mm
height (head vertical)
519 mm (incl. standing foot/tripod)
Weight (net)
31.0 kg
Impression X4 XL manual (v1.1)
from software version: v1.47
22
GLP  German Light Products GmbH
8 Dimensions
PAN movement range: 660°
Impression X4 XL manual (v1.1)
from software version: v1.47
23
GLP  German Light Products GmbH
9 Index
B
beam-lights .................................................... 6
BGV C1............................................................ 7
Mounting in sidewise Position ....................... 10
Mounting on the Floor ..................................... 8
N
C
Normal-Mode ................................................ 14
Camlock ........................................................... 8
Cleaning.........................................................22
Compress-Mode ............................................17
O
D
Danger of BURNING ...................................... 5
Description of Device ....................................... 4
Dimensions ....................................................24
DIN VDE 0711-217 .......................................... 7
Display Indications ......................................21
DMX ...............................................................11
E
EN 60598-2-17 ..............................................11
Enter-key .......................................................11
Eyelets ............................................................. 8
H
Half-couplers (clamps)...................................10
High Resolution (Extended) -Mode ...............19
Optical parts ................................................ 22
P
Pan- Movement............................................. 23
plano-convex lenses ....................................... 6
Power Supply .............................................. 11
R
RESET .............................................. 15, 18, 19
S
Safety distance ............................................... 7
Safety information ........................................... 6
Safety Instructions .......................................... 5
Secure the Device ....................................... 11
sunlight ............................................................ 6
T
L
Technical Specifications ............................ 23
Tilt- Movement .............................................. 23
LED Class 2M ................................................. 5
U
M
Up/Down-keys .............................................. 11
Maintenance ..................................................22
Menu Field .....................................................11
Micro-fuse ......................................................11
Mode-key.......................................................11
Mounting......................................................... 7
Mounting in hanging Position .......................... 9
V
Impression X4 XL manual (v1.1)
VBG 70 ........................................................... 7
W
Warranty claims .............................................. 5
Weights and Measures ................................. 23
from software version: v1.47
24
GLP  German Light Products GmbH
Impression X4 XL manual (v1.1)
from software version: v1.47
25
Download PDF
Similar pages