U P D AT E D 8 / 1 5
157 L E D New
FABRIC SHADE DRUM
print this page
email this page to a colleague
installation instructions
interactive submittal drawing
COMPANIONS
303
503
Shown with cream linen shade.
FEATURES
• Purpose-built design for LED only.
• High efficacy and high CRI.
• Available with a luminous white acrylic
or acrylic with fabric intelayer drum.
• Classic drum shape available with a
variety of fabric shades.
MATERIALS
ECO INFO
ENERGY: Designed exclusively for LEDs using HPF
electronic drivers.
FABRIC SHADE: Available with sustainably produced
fabrics that are backed with a US made paper backing,
that replaces the standard styrene backing.
See OPTIONAL FABRICS on Pg. 2.
METALS: Aluminum with the highest available recycled
content for lower embodied energy. Aluminum is
valuable and recyclable at the end of the product’s useful
life. For more information see “GENERAL INFO”
FINISHING: Aluminum finish is sealed with a handapplied bees wax. No paint or lacquer is used in order
to avoid pollution associated with the manufacture and
application of these substances. Paint finishes are low
VOC and oven cured.
• Fabric drum shade.
• Spun aluminum bottom pan.
• Aluminum heat sink disks.
FINISHES
SAL Satin Aluminum (Hand satined and waxed.)
MW Matte White
CCP Custom Color Painted finish
LAMPING
1-16W LED array; 2120 lumens, 3000K, 80 CRI and 94 LM/W.
LED array is included and is replaceable.
DRIVER
Integral HPF electronic driver is multi-volt 120/277
and is 0-10V dimmable.
999 Montague St • San Leandro, CA 94577 • ph 510.357.0171 • fax 510.357.3832 • www.bordenlighting.com
157
OPTIONS
FABRIC SHADE: Standard, or default, shade is Cream
Linen. Optional shade fabrics are shown below.
Call factory for other fabrics.
4 1/2"
OPTIONAL LUMINOUS DRUM MATERIALS:
The luminous drum is available in white acrylic, specify WA or
3 form Linen White, specify 3LW. 3LW is an acrylic with fabric
inter layer. See below. Note that both WA and 3LW will have
a single vertical seam similar to a fabric shade.
4"
6"
pendants
14 1/4"
ceiling
PHOTOMETRICS
Lighting
int wall Laboratory Report L07120301
Fixture Efficacy: 49.02 lumens per watt
86% downlight & 14% uplight. Tested
with an LED rated at 1410lm; new LED
rated at 2120lm or 50% more. Adjust
light levels accordingly.
3 form Linen White (3LW)
White Acrylic
STANDARD FABRIC
Cream Linen
157
OPTIONAL FABRICS: Imported 100% flax linen.
VAN Vanilla
WHT White
ext wall
OAT Oatmeal
OPTIONAL ECO-FABRICS:
Sustainably produced hemp and organic cotton with paper backing.
Click
HERE
to learn more
about shade fabrics
CRH
Cream Hemp
CATALOG DRAWING
HOC Hemp/
Organic Cotton
SCALE
SPECIFIER
DATE
PROJECT SPEC
DWN
UL /&MODIFICATIONS
IBEW LABELED
DRY
VARIATIONS
and is 0-10V dimmable.
DAMP
WET
• Special shade fabrics
• Addition of decorative detail
WEIGHT: 5 lbs
CAT#
q 157
-
SAMPLE SPEC: 157-LED/17-120-SAL-OAT
LAMPING
q LED/16W
M
1
• Special
finishes
Information appearing
hereon
is proprietary and confidential and may not be used without the permission of Borden
MOUNTING: Standard J-box or plaster ring.
SPEC GUIDE
3
SPEC NO
999 Montague Street
San Leandro, CA 94577
510-357-0171 Fax 510-357-3832
www.bordenlighting.com
NOTE: Standard electronic driver is multi-volt
TYPE
PROJECT
-
VOLT
q 120
q 277
-
FINISH
q SAL
q MW
q CCP
-
OPTION
CATALOG SCALE DRAWING
PROJECT
TYPE
SCALE
1/4" = 1' - 0"
q VAN (Vanilla)
DATE 21 FEB 2012
SPECIFIER
IBEW Labelled
DWN MY CKD RB
PROJECT SPEC
q WHT (White)
SPEC NO
q OAT
(Oatmeal)
999 Montague
Street
San Leandro, CA 94577
510-357-0171
Fax
510-357-3832
q DOV
(Dove Polyester)
157
www.bordenlighting.com
UL & IBEW LABELED
DRY
DAMP
WET
Our fixtures are handcrafted
q WA (White Acrylic)
Information appearing hereon is proprietary and confidential and may not behere
used without
theUSA
permission
of Borden
in the
using
the Lighting.
q 3LW (3form Linen White)
highest quality materials.
999 Montague St • San Leandro, CA 94577 • ph 510.357.0171 • fax 510.357.3832 • www.bordenlighting.com