HITC LED SERIES Cast Downlights integrate into your ceiling for the

HITC LED SERIES
RECESSED Hole In The Ceiling Light Niche
For Plaster or Drywall
Downlight
Cast Downlights integrate into
your ceiling for the custom built
look of a drywall light niche.
System
Round and Square aperture downlights cast with GRG (Glass fiber Reinforced Gypsum) composite material. Once installed,
the fixture actually appears to be part of your ceiling and looks like a custom formed drywall “light niche” that blends with
any interior motif.
HITC LED SERIES
RECESSED Hole In The Ceiling Light Niche
For Plaster or Drywall
RESIDENTIAL
PERFORMING ARTS
COMMERCIAL
HOSPITALITY
EDUCATIONAL
HITC LED SERIES
TYPE:
CATALOG #:
JOB:
RECESSED Hole In The Ceiling Light Niche
For Plaster or Drywall
Specifications
LED “Hole In The Ceiling” fixtures are available in round or square
4-1/2´´, 6´´, 8´´ and 10´´ apertures for 16, 20, 25 and 25 watts
respectively. Fixtures utilize Bridgelux LEDs and are 90+CRI.
These high color rendering LED lamps are an energy saving
alternative to halogen and fluorescent sources. The recessed
GRG fixture is fiberglass reinforced cast plaster with integral
electrical components. All electrical components in the metal “Top
Hat” are accessible through the bottom of the fixture. The LED
dimming driver is supplied standard. Please specify.
The durable, GRG casting mounts directly to stud construction
and allows 5/8´´ gypsum board construction butting the fixture.
Metal “Top Hat” components combine 20 gauge CRS and
aluminum for proper cooling of the LED. CRS components are
TGIC polyester powder coated.
NOTE: Please do not specify or try to install this product
without clear understanding of the installation instructions.
c/CSA/us Damp Location Listed, IC Rated - Made in the USA
Patent #7,824,059.
Drawing 1
Section
Drawing 2
8-1/4˝
4-1/2˝
8-1/4˝
4-1/2˝
8-1/4˝
Front View
15-3/4˝
15-3/4˝
11-3/16˝
9-3/4˝
8-1/4˝
6˝
Driver 120/277 0-10 volt, Osram OT 1% Dim (Standard)
For Alternate Dimming:
3-wire/Digital, Lutron ECO Systems L3D 1% -DM6
2-wire, Lutron LTE 1% (120v only) -DM7
Lower Lumen Output (All Driver Options) -LL**
** Consult Factory.
Section
6˝
9-3/4˝
Front View
IC Rated (Standard)
LED Must Specify* (Lumens vary per color)
2700K -27K
3000K -30K
3500K -35K
4000K -40K
Frosted Acrylic -MLF (Standard)
Frosted Glass “Lift & Shift” -LSGL
(LSGL Lens is 1-1/2´´ above the Ceiling)
Residential For 7-7/8´´ Height, -8H u
Height
18-3/4˝
12-1/4˝
11-3/4˝
10-1/4˝
8-1/4˝
Section
Metal Finish White (Standard)
Anti-Microbial White -MB
Drawing 4
Note: These models are California Title 24 compliant:
120W1-HITC-(S or R)-6 (*K)
125W1-HITC-(S or R)-8 (*K)
125W1-HITC-(S or R)-10 (*K)
14-1/4˝
8˝
11-3/4˝
Front View
19-5/8˝
8˝
11-3/4˝
19-5/8˝
13-3/4˝
10-1/4˝
10-1/4˝
Section
** Multipliers = Lutron L3D is .9 / Lutron LTE is .75
*** S or R in Number indicates Square or Round Aperture.
u Available for Residential Height of 7-7/8˝ (Add -8H)
6˝
9-3/4˝
Drawing 3
18-3/4˝
IC © 2016 Engineered Lighting
Products.
9-3/4˝
9-1/2˝
6-3/16˝
Options
Lens 15-1/4˝
15-1/4˝
10˝
13-3/4˝
Model * * *
Drawing 116W1-HITC (S or R)-4 -(*K) u 1 120W1-HITC (S or R)-6 -(*K)
2
125W1-HITC (S or R)-8 -(*K)
3
125W1-HITC (S or R)-10 -(*K)
4
10˝
13-3/4˝
Front View
Watts 16 20 25 25 * * Fixture Lumens for 3500K
650
1175
1525
1525
10768 Lower Azusa Rd., El Monte, CA 91731 • TEL: 626-579-0943 • FAX: 626-579-6803
E-MAIL: contact@elplighting.com • WEB: www.elplighting.com
HITC LED SERIES
TYPE:
CATALOG #:
JOB:
RECESSED Hole In The Ceiling Light Niche
For Plaster or Drywall
Additional Castings Available
Slope Castings for 4´´ Square:
Slope Castings for 4´´ Round:
5/8˝
5/8˝
8-1/8˝
8-1/8˝
7-3/8˝
26.57˚
4-1/2˝
5/8˝
5/8˝
8-7/8˝
13.5˚
RC18 Castings for 6´´ Round:
5-1/2˝
30˚
4-1/2˝
6˝
For “R-4” Fixtures, Add -35S
Standard Lens
For “S-6” Fixtures, Add -30S
Lift and Shift Lens
4-1/2˝
For “S-4” Fixtures, Add -13.5S For “S-4” Fixtures, Add -26.57S For “S-4” Fixtures, Add -33.69S
Standard Lens
Standard Lens
Standard Lens
Custom Slope castings may be ordered. These slopes are currently available.
120W1-HITC-S6-35K
6˝
15-1/8˝
5/8˝
18˝
23-3/4˝
For “R-6” Fixtures, Add -RC18
Standard Lens
SEE DETAILED INSTALLATION
INSTRUCTIONS
NOTE: Casting/Fixture should be installed by the
drywall contractor and the metal “Top Hat” wired by
the electrical contractor.
1) Fixture casting mounts directly to studs.
2) Install metal electrical unit and make connections.
3) Install drywall to the edge of the casting.
4) Use standard drywall tape and joint compound at
the seam edges.
5) Sand and finish like typical drywall seam.
6) Finish fixture and ceiling.
Finished fixture appears to be a custom formed
drywall light niche.
© 2016 Engineered Lighting
Products.
5/8˝
35˚
33.69˚
4-1/2˝
Installation
Slope Castings for 6´´ Round:
(9) Fixtures, 6´ O.C. Light Levels on the Lobby Floor
Ceiling at 12´ Height
9
11
13
14
14
14
14
13
11
9
11
12
15
16
16
16
16
15
12
11
13
15
19
21
20
20
21
19
15
13
14
16
21
22
22
22
22
21
16
14
10´
14
16
20
22
21
21
22
20
16
14
14
16
20
22
21
21
22
20
16
14
14
16
21
22
22
22
22
21
16
14
13
15
19
21
20
20
21
19
15
13
11
12
15
16
16
16
16
15
12
11
9
11
13
14
14
14
14
13
11
9
2´
20´
IES File #120W1HITCS6_35 - Maintained Light Levels / Reflectance at .80 .50 .20
10768 Lower Azusa Rd., El Monte, CA 91731 • TEL: 626-579-0943 • FAX: 626-579-6803
E-MAIL: contact@elplighting.com • WEB: www.elplighting.com
Download PDF
Similar pages