BC230XL
BRUSH CHIPPER
COMPACT SIZE. When equipped with all
OPTIONAL 180° SLEW RING. Allows the
HIGH GROUND CLEARANCE. 36 cm (14.2”)
machine options and a full fuel tank, the BC230XL
still weighs less than 2000 kg (4409.3 lb). The
relatively low weight reduces load on towing
vehicle and the 1,9 m (6.2’) wide trailer frame
provides stable towing performance and good
visibility when reversing.
chipper infeed chute to be rotated to face where
the material is located for ease of feeding and helps
increase safety when working along the roadside by
keeping the operator away from road traffic.
under the chassis and 26 cm (10.2”) under the
axle allows the chipper to be used off-road without
risk of ground debris becoming caught and
causing damage or problems with towing.
SMARTFEED. The SmartFeed system monitors
TWIN HORIZONTAL FEED ROLLERS. The
POWERFUL PERFORMANCE. A 66 hp
engine rpm and automatically stops and reverses
the feed rollers to enhance production. This
system also senses feed roller jams and
manipulates the material automatically to
reduce the need for manual control bar use.
lower feed roller is offset from the upper feed
roller to ensure that material at maximum
capacity is easily fed to the chipper.
(49,2 kW) engine allows you to not only meet
emission requirements but also enough
horsepower to meet your jobsite needs.
VERMEER.COM
BC230XL.indd 1
8/5/15 3:09 PM
BC230XL BRUSH CHIPPER
GENERAL WEIGHTS AND DIMENSIONS
DISC
Weight: 1980 kg (4365.2 lb)
Weight: 150 kg (330.7 lb)
Weight (tongue): 91 kg (200.6 lb)
Width: 25 cm (9.8”)
Length (transport): 363 cm (142.9”)
Diameter: 84 cm (33.1”)
Width: 188 cm (74”)
Speed: 1350 rpm
Height (transport): 240 cm (94.5”)
Knives: 2 A8 chipper steel
Infeed opening width: 35.5 cm (14”)
Safety lock: 2 positions
Infeed opening height: 23 cm (9.1”)
ENGINE
Make and model: Kubota V2607T
Fuel type: Ultra-low sulfur diesel
Gross horsepower: 66 hp (49.2 kW)
Max torque: 215.8 Nm (159.2 ft-lb)
FEED SYSTEM
Number of feed rollers: 2
Feed roller diameter: 26 cm (9.8”)
Orientation: Horizontal
Clamping force: 303 kg (668 lb)
Distance from disc: 8 cm (3.2”)
Number of cylinders: 4
Cooling method: Water/Antifreeze
INFEED TABLE
Sound power: 120 dB(a)
Width: 122 cm (48”)
Distance from center feed roller to end table: 165 cm (65”)
FLUID CAPACITIES
Distance from table to ground: 75 cm (29.5”)
Fuel tank: 55 L (14.5 gal)
Hydraulic tank: 22.7 L (6 gal)
DISCHARGE SYSTEM
Chute height: 205 cm (80.7”)
CHASSIS
Wheel assy: 215R14C
Lights: LED
Axle/Suspension: Knott 2500 kg (5511.6 lb), rubber torsion,
single axle
Surgebrake: Type Knott KRV30
NOTES:
Vermeer Corporation reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without note or obligation. Equipment shown is
for illustrative purposes only and may display optional accessories or components. Model availability limited to certain geographic locations. Please contact your local Vermeer dealer for more information on
machine specifications. Vermeer, the Vermeer logo and Equipped to Do More are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries. Kubota is a trademark of Kubota Ltd.
© 2015 Vermeer Corporation. All Rights Reserved.
07/15
BC230XL.indd 2
PN 29431528
8/5/15 3:09 PM
Download PDF
Similar pages