WELDING SYSTEMS
1
Vacuum sealing enables a particularly safe and clean sealing seam. To achieve this, we
equip our Boss machines with various high-pressure sealing systems, which have been
specially adapted to suit the material and strength of the bag or the consistency of the
product being packaged. We guarantee a high-quality outcome for your sealing process.
2
1: Standard double welding
This system is used for 90% of our vacuum packing machines. The double weld seam
ensures that the vacuum bag is reliably bonded.
2: Separating welding
With this system, the excess lenght of the bag is cut off. The welding process produces
two weld seams - a simple weld seam and the separating weld seam.
3: Top/bottom welding
In this case, the bag is welded up from two sides. This system is implemented when
particularly thick vacuum bags or aluminium bags need to be sealed.
4: Separately adjustable cut-off seal
This system severs the excess length of the bag. Both the temperature of these parating wire and sealing wire (A - B) can be adjusted separately. This is important, for
example, with shrink bags. This function is only available for machines equipped with
the Z 3000 control.
3
4
A
B
CONTROL SYSTEM MODELS
1
2
4
2
5
3
6
+
Vacuum pump
A vacuum pump evacuates the gases from the interior of the vacuum chamber.
The reduction in oxygen provides ideal conditions for preserving a wide range of product categories. BOSS
vacuum packaging machines are fitted with high-performance oil-powered rotary disc vacuum pumps made by
Busch. They create a fine vacuum of up to 99.9% (1 mbar) – ideal for slowing the multiplication of bacteria and
germs.
MAP gassing
Packed in a protective atmosphere (MAP: Modified Atmosphere Packaging), fresh foods retain their appearance,
texture and nutritional value. This method involves filling the contents of the bag with a protective gas after the
vacuum chamber has been evacuated.
The protective atmosphere consists of natural, odourless and tasteless constituent gases of air e.g. carbon
dioxide (CO2) or nitrogen (N), the proportions of which are varied depending on the product.
Insertion plates
The stylish insertion plates are made of shock-proof, scratch-proof, and food-grade PE materials.
They can be used to precisely position the vacuum-packed goods and to reduce the chamber volume. This minimises evacuation time and gas consumption.
Hygiene
For rapid and simple cleaning, BOSS machines are finished in high-quality stainless steel and are fitted with
splash-proof elements. A clear construction ensures there are no hard-to-reach recesses or crevices, guaranteeing the highest level of hygiene. The cable-free plug-in system for the sealing bars can be easily removed,
making it easy to clean.
1: Time-controlled digital control Z 2000
Very easy operation · Large vacuum display · Quick stop for liquid packaging · Continuous operation/service button · Parameters (vacuum/sealing time/gas) can be set
individually
ESD version
Our machines are equipped with stainless steel lids. All surfaces are electrically conductive. Critical surfaces
have been coated with dissipative plastics, and feature a bleeder resistance of 1-6 Ohm/sq, compliant with ESD
standard NE 61340-5-1.
2: Programmable sensor control Z 3000
Very easy operation · Precise vacuum and gas sensor · 99 Memory locations · Vacuum
process up to the vaporization point · Soft air system · Stage-vacuum allows the entrapped air to escape from the product · Quick stop · Gas purging = Multiple vacuum
and gas cycles · Continuous operation/service button · Splash-proof
H2O Sensor/Evaporation point detection
The falling pressure in the vacuum chamber means the boiling point of moist or liquid products is reached
quickly. To protect your product against unnecessary loss of moisture due to evaporation, an intelligent sensor
detects the vapour phase and ends the vacuum-packing process safely and reliably. You benefit by preventing
weight loss to your product and contamination of the vacuum chamber.
Service
In order to reduce your service costs and help prevent downtimes due to maintenance work, a particular focus
has been placed on a service-friendly design. Individual components are easily accessible and clearly visible. A
service programme guarantees a long service life for your vacuum pump.
OPTIONS
1
T E C H N I C A L DATA
1: Undercarriage available for all table models
Elegant design · Stable · Integrated bag storage compartment · Locking rollers ·
Made completely of stainless steel
2: Control extern
Control fixed onto a lateral stainless steel arm or position according to agreement
with customer
3: ESD version
Our machines are equipped with stainless steel lid · All surfaces are electrically conductive.
4: Inspection glass · Available for models with stainless steel lid
5: Gas flush device · Available for all models
6: Also available · Special voltages · Slow air release · Suction device for gastronorm
containers · A range of lid heights and pump sizes
Power vacuum function
Because raw meat contains a large proportion of water, there is a risk of blistering in the vacuum bag. To avoid
this risk, and to increase the visual packaging quality, our machines come with a power vacuum function, which
forces unwanted air bubbles out of the bag.
Helmut Boss Verpackungsmaschinen KG
Zum Wingert 5 · D-61352 Bad Homburg · Tel. +49 (0) 6172 457097 · Fax +49 (0) 6172 44139
www.vacuum-boss.com · info@vacuum-boss.com
2
ESD, SPECIAL AND VERTICAL MACHINES
460
600
570
700
640
NE 14 VA
755
685
800
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
750 x 510 x 180 mm*
480 mm
63 / 100 m3/h
0,82 x 0,72 x 1,0 m*
182 / 200 kg
3 x 230 / 400 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
825 x 660 x 200 / 300 / 420 mm*
650 / 800 mm
100 / 160 m3/h
0,91 x 0,93 x 0,99 / 1,20 m*
320 / 390 kg
3 x 230 / 400 V, 50 Hz****
V 42 VA
420
390
480
650 x 475 x 230 mm*
460 mm
21 m3/h
0,75 x 0,67 x 0,44 m*
110 kg
1 x 230 V, 50 Hz****
480
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
NE 63 VA
650
460
MAX 46 VA
450 x 460 x 230 mm*
420 mm
21 m3/h
0,54 x 0,65 x 0,41 m*
78 kg
1 x 230 V, 50 Hz****
590
420
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
650
410
MAX 42 VA
VERTICAL MACHINES
ESD-MACHINES
V 50 VA
520
480
ESD-MACHINES
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
440 x 445 x 180 mm**
420 mm
21 m3/h
0,6 x 0,7 x 0,7 m*
85 kg
1 x 230 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
530 x 545 x 185 mm**
520 mm
25 / 63 m3/h
0,65 x 0,7 x 1,53 m*
150 / 170 kg
3 x 230 / 400 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
850 x 670 x 200 mm**
810 mm
100 / 160 m3/h
1,07 x 1,0 x 1,98 m* (2,2 m***)
400 / 470 kg
3 x 230 V / 400 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
740 x 860 x 230 mm**
630 mm
100 / 160 m3/h
1,60 x 1,10 x 1,30 m*
340 / 410 kg
3 x 230 V / 400 V, 50 Hz****
S P E C I A L- P U R P O S E M AC H I N E S
500
MAX-F 50 VA
500
530
810
530 x 545 x 125 mm*
500 mm
25 / 63 m3/h
0,65 x 0,7 x 0,96 m*
125 / 145 kg
3 x 230 V / 400 V, 50 Hz****
600
VX 630 VA
NE 800 E2
810
810
NE 1000 E2
1100
1100
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
850 x 600 x 250 mm*
810 mm
100 / 160 m3/h
0,98 x 1,2 x 1,22 / 1,67 m*
300 / 370 kg
3 x 230 / 400 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
1175 x 600 x 250 mm*
1100 mm
160 / 250 / 300 m3/h
1,26 x 1,2 x 1,22 / 1,67 m*
420 / 470 kg
3 x 230 / 400 V, 50 Hz****
630
700
530 x 545 x 185 mm*
500 mm
25 / 63 m3/h
0,65 x 0,7 x 1,0 m*
128 / 148 kg
3 x 230 / 400 V, 50 Hz****
545
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
500
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
490
570
650 x 475 x 230 mm*
460 mm
25 / 63 m3/h
0,75 x 0,65 x 1,0 m*
135 / 155 kg
3 x 230 / 400 V, 50 Hz****
MAX-F 50 D
490
600
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
V 810 VA
490
460
460
MAX-F 46 VA
450 x 460 x 230 mm*
420 mm
21 / 25 m3/h
0,54 x 0,65 x 1,0 m*
96 / 109 kg
1 x 230 V, 50 Hz****
490
420
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
500
410
MAX-F 42 VA
*
**
***
****
width x depth x height
width x height x depth
total height, when the lid is open
special voltages upon request
460
600
570
700
640
NE 14 VA
755
685
800
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
750 x 510 x 180 mm*
480 mm
63 / 100 m3/h
0,82 x 0,72 x 1,0 m*
182 / 200 kg
3 x 230 / 400 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
825 x 660 x 200 / 300 / 420 mm*
650 / 800 mm
100 / 160 m3/h
0,91 x 0,93 x 0,99 / 1,20 m*
320 / 390 kg
3 x 230 / 400 V, 50 Hz****
V 42 VA
420
390
480
650 x 475 x 230 mm*
460 mm
21 m3/h
0,75 x 0,67 x 0,44 m*
110 kg
1 x 230 V, 50 Hz****
480
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
NE 63 VA
650
460
MAX 46 VA
450 x 460 x 230 mm*
420 mm
21 m3/h
0,54 x 0,65 x 0,41 m*
78 kg
1 x 230 V, 50 Hz****
590
420
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
650
410
MAX 42 VA
VERTICAL MACHINES
ESD-MACHINES
V 50 VA
520
480
ESD-MACHINES
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
440 x 445 x 180 mm**
420 mm
21 m3/h
0,6 x 0,7 x 0,7 m*
85 kg
1 x 230 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
530 x 545 x 185 mm**
520 mm
25 / 63 m3/h
0,65 x 0,7 x 1,53 m*
150 / 170 kg
3 x 230 / 400 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
850 x 670 x 200 mm**
810 mm
100 / 160 m3/h
1,07 x 1,0 x 1,98 m* (2,2 m***)
400 / 470 kg
3 x 230 V / 400 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
740 x 860 x 230 mm**
630 mm
100 / 160 m3/h
1,60 x 1,10 x 1,30 m*
340 / 410 kg
3 x 230 V / 400 V, 50 Hz****
S P E C I A L- P U R P O S E M AC H I N E S
500
MAX-F 50 VA
500
530
810
530 x 545 x 125 mm*
500 mm
25 / 63 m3/h
0,65 x 0,7 x 0,96 m*
125 / 145 kg
3 x 230 V / 400 V, 50 Hz****
600
VX 630 VA
NE 800 E2
810
810
NE 1000 E2
1100
1100
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
850 x 600 x 250 mm*
810 mm
100 / 160 m3/h
0,98 x 1,2 x 1,22 / 1,67 m*
300 / 370 kg
3 x 230 / 400 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
1175 x 600 x 250 mm*
1100 mm
160 / 250 / 300 m3/h
1,26 x 1,2 x 1,22 / 1,67 m*
420 / 470 kg
3 x 230 / 400 V, 50 Hz****
630
700
530 x 545 x 185 mm*
500 mm
25 / 63 m3/h
0,65 x 0,7 x 1,0 m*
128 / 148 kg
3 x 230 / 400 V, 50 Hz****
545
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
500
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
490
570
650 x 475 x 230 mm*
460 mm
25 / 63 m3/h
0,75 x 0,65 x 1,0 m*
135 / 155 kg
3 x 230 / 400 V, 50 Hz****
MAX-F 50 D
490
600
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
V 810 VA
490
460
460
MAX-F 46 VA
450 x 460 x 230 mm*
420 mm
21 / 25 m3/h
0,54 x 0,65 x 1,0 m*
96 / 109 kg
1 x 230 V, 50 Hz****
490
420
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
500
410
MAX-F 42 VA
*
**
***
****
width x depth x height
width x height x depth
total height, when the lid is open
special voltages upon request
460
600
570
700
640
NE 14 VA
755
685
800
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
750 x 510 x 180 mm*
480 mm
63 / 100 m3/h
0,82 x 0,72 x 1,0 m*
182 / 200 kg
3 x 230 / 400 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
825 x 660 x 200 / 300 / 420 mm*
650 / 800 mm
100 / 160 m3/h
0,91 x 0,93 x 0,99 / 1,20 m*
320 / 390 kg
3 x 230 / 400 V, 50 Hz****
V 42 VA
420
390
480
650 x 475 x 230 mm*
460 mm
21 m3/h
0,75 x 0,67 x 0,44 m*
110 kg
1 x 230 V, 50 Hz****
480
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
NE 63 VA
650
460
MAX 46 VA
450 x 460 x 230 mm*
420 mm
21 m3/h
0,54 x 0,65 x 0,41 m*
78 kg
1 x 230 V, 50 Hz****
590
420
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
650
410
MAX 42 VA
VERTICAL MACHINES
ESD-MACHINES
V 50 VA
520
480
ESD-MACHINES
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
440 x 445 x 180 mm**
420 mm
21 m3/h
0,6 x 0,7 x 0,7 m*
85 kg
1 x 230 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
530 x 545 x 185 mm**
520 mm
25 / 63 m3/h
0,65 x 0,7 x 1,53 m*
150 / 170 kg
3 x 230 / 400 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
850 x 670 x 200 mm**
810 mm
100 / 160 m3/h
1,07 x 1,0 x 1,98 m* (2,2 m***)
400 / 470 kg
3 x 230 V / 400 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
740 x 860 x 230 mm**
630 mm
100 / 160 m3/h
1,60 x 1,10 x 1,30 m*
340 / 410 kg
3 x 230 V / 400 V, 50 Hz****
S P E C I A L- P U R P O S E M AC H I N E S
500
MAX-F 50 VA
500
530
810
530 x 545 x 125 mm*
500 mm
25 / 63 m3/h
0,65 x 0,7 x 0,96 m*
125 / 145 kg
3 x 230 V / 400 V, 50 Hz****
600
VX 630 VA
NE 800 E2
810
810
NE 1000 E2
1100
1100
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
850 x 600 x 250 mm*
810 mm
100 / 160 m3/h
0,98 x 1,2 x 1,22 / 1,67 m*
300 / 370 kg
3 x 230 / 400 V, 50 Hz****
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
1175 x 600 x 250 mm*
1100 mm
160 / 250 / 300 m3/h
1,26 x 1,2 x 1,22 / 1,67 m*
420 / 470 kg
3 x 230 / 400 V, 50 Hz****
630
700
530 x 545 x 185 mm*
500 mm
25 / 63 m3/h
0,65 x 0,7 x 1,0 m*
128 / 148 kg
3 x 230 / 400 V, 50 Hz****
545
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
500
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
490
570
650 x 475 x 230 mm*
460 mm
25 / 63 m3/h
0,75 x 0,65 x 1,0 m*
135 / 155 kg
3 x 230 / 400 V, 50 Hz****
MAX-F 50 D
490
600
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
V 810 VA
490
460
460
MAX-F 46 VA
450 x 460 x 230 mm*
420 mm
21 / 25 m3/h
0,54 x 0,65 x 1,0 m*
96 / 109 kg
1 x 230 V, 50 Hz****
490
420
internal chamber dimensions
seal length
vacuum pump
external dimensions
weight
connections
500
410
MAX-F 42 VA
*
**
***
****
width x depth x height
width x height x depth
total height, when the lid is open
special voltages upon request
WELDING SYSTEMS
1
Vacuum sealing enables a particularly safe and clean sealing seam. To achieve this, we
equip our Boss machines with various high-pressure sealing systems, which have been
specially adapted to suit the material and strength of the bag or the consistency of the
product being packaged. We guarantee a high-quality outcome for your sealing process.
2
1: Standard double welding
This system is used for 90% of our vacuum packing machines. The double weld seam
ensures that the vacuum bag is reliably bonded.
2: Separating welding
With this system, the excess lenght of the bag is cut off. The welding process produces
two weld seams - a simple weld seam and the separating weld seam.
3: Top/bottom welding
In this case, the bag is welded up from two sides. This system is implemented when
particularly thick vacuum bags or aluminium bags need to be sealed.
4: Separately adjustable cut-off seal
This system severs the excess length of the bag. Both the temperature of these parating wire and sealing wire (A - B) can be adjusted separately. This is important, for
example, with shrink bags. This function is only available for machines equipped with
the Z 3000 control.
3
4
A
B
CONTROL SYSTEM MODELS
1
2
4
2
5
3
6
+
Vacuum pump
A vacuum pump evacuates the gases from the interior of the vacuum chamber.
The reduction in oxygen provides ideal conditions for preserving a wide range of product categories. BOSS
vacuum packaging machines are fitted with high-performance oil-powered rotary disc vacuum pumps made by
Busch. They create a fine vacuum of up to 99.9% (1 mbar) – ideal for slowing the multiplication of bacteria and
germs.
MAP gassing
Packed in a protective atmosphere (MAP: Modified Atmosphere Packaging), fresh foods retain their appearance,
texture and nutritional value. This method involves filling the contents of the bag with a protective gas after the
vacuum chamber has been evacuated.
The protective atmosphere consists of natural, odourless and tasteless constituent gases of air e.g. carbon
dioxide (CO2) or nitrogen (N), the proportions of which are varied depending on the product.
Insertion plates
The stylish insertion plates are made of shock-proof, scratch-proof, and food-grade PE materials.
They can be used to precisely position the vacuum-packed goods and to reduce the chamber volume. This minimises evacuation time and gas consumption.
Hygiene
For rapid and simple cleaning, BOSS machines are finished in high-quality stainless steel and are fitted with
splash-proof elements. A clear construction ensures there are no hard-to-reach recesses or crevices, guaranteeing the highest level of hygiene. The cable-free plug-in system for the sealing bars can be easily removed,
making it easy to clean.
1: Time-controlled digital control Z 2000
Very easy operation · Large vacuum display · Quick stop for liquid packaging · Continuous operation/service button · Parameters (vacuum/sealing time/gas) can be set
individually
ESD version
Our machines are equipped with stainless steel lids. All surfaces are electrically conductive. Critical surfaces
have been coated with dissipative plastics, and feature a bleeder resistance of 1-6 Ohm/sq, compliant with ESD
standard NE 61340-5-1.
2: Programmable sensor control Z 3000
Very easy operation · Precise vacuum and gas sensor · 99 Memory locations · Vacuum
process up to the vaporization point · Soft air system · Stage-vacuum allows the entrapped air to escape from the product · Quick stop · Gas purging = Multiple vacuum
and gas cycles · Continuous operation/service button · Splash-proof
H2O Sensor/Evaporation point detection
The falling pressure in the vacuum chamber means the boiling point of moist or liquid products is reached
quickly. To protect your product against unnecessary loss of moisture due to evaporation, an intelligent sensor
detects the vapour phase and ends the vacuum-packing process safely and reliably. You benefit by preventing
weight loss to your product and contamination of the vacuum chamber.
Service
In order to reduce your service costs and help prevent downtimes due to maintenance work, a particular focus
has been placed on a service-friendly design. Individual components are easily accessible and clearly visible. A
service programme guarantees a long service life for your vacuum pump.
OPTIONS
1
T E C H N I C A L DATA
1: Undercarriage available for all table models
Elegant design · Stable · Integrated bag storage compartment · Locking rollers ·
Made completely of stainless steel
2: Control extern
Control fixed onto a lateral stainless steel arm or position according to agreement
with customer
3: ESD version
Our machines are equipped with stainless steel lid · All surfaces are electrically conductive.
4: Inspection glass · Available for models with stainless steel lid
5: Gas flush device · Available for all models
6: Also available · Special voltages · Slow air release · Suction device for gastronorm
containers · A range of lid heights and pump sizes
Power vacuum function
Because raw meat contains a large proportion of water, there is a risk of blistering in the vacuum bag. To avoid
this risk, and to increase the visual packaging quality, our machines come with a power vacuum function, which
forces unwanted air bubbles out of the bag.
Helmut Boss Verpackungsmaschinen KG
Zum Wingert 5 · D-61352 Bad Homburg · Tel. +49 (0) 6172 457097 · Fax +49 (0) 6172 44139
www.vacuum-boss.com · info@vacuum-boss.com
2
ESD, SPECIAL AND VERTICAL MACHINES
WELDING SYSTEMS
1
Vacuum sealing enables a particularly safe and clean sealing seam. To achieve this, we
equip our Boss machines with various high-pressure sealing systems, which have been
specially adapted to suit the material and strength of the bag or the consistency of the
product being packaged. We guarantee a high-quality outcome for your sealing process.
2
1: Standard double welding
This system is used for 90% of our vacuum packing machines. The double weld seam
ensures that the vacuum bag is reliably bonded.
2: Separating welding
With this system, the excess lenght of the bag is cut off. The welding process produces
two weld seams - a simple weld seam and the separating weld seam.
3: Top/bottom welding
In this case, the bag is welded up from two sides. This system is implemented when
particularly thick vacuum bags or aluminium bags need to be sealed.
4: Separately adjustable cut-off seal
This system severs the excess length of the bag. Both the temperature of these parating wire and sealing wire (A - B) can be adjusted separately. This is important, for
example, with shrink bags. This function is only available for machines equipped with
the Z 3000 control.
3
4
A
B
CONTROL SYSTEM MODELS
1
2
4
2
5
3
6
+
Vacuum pump
A vacuum pump evacuates the gases from the interior of the vacuum chamber.
The reduction in oxygen provides ideal conditions for preserving a wide range of product categories. BOSS
vacuum packaging machines are fitted with high-performance oil-powered rotary disc vacuum pumps made by
Busch. They create a fine vacuum of up to 99.9% (1 mbar) – ideal for slowing the multiplication of bacteria and
germs.
MAP gassing
Packed in a protective atmosphere (MAP: Modified Atmosphere Packaging), fresh foods retain their appearance,
texture and nutritional value. This method involves filling the contents of the bag with a protective gas after the
vacuum chamber has been evacuated.
The protective atmosphere consists of natural, odourless and tasteless constituent gases of air e.g. carbon
dioxide (CO2) or nitrogen (N), the proportions of which are varied depending on the product.
Insertion plates
The stylish insertion plates are made of shock-proof, scratch-proof, and food-grade PE materials.
They can be used to precisely position the vacuum-packed goods and to reduce the chamber volume. This minimises evacuation time and gas consumption.
Hygiene
For rapid and simple cleaning, BOSS machines are finished in high-quality stainless steel and are fitted with
splash-proof elements. A clear construction ensures there are no hard-to-reach recesses or crevices, guaranteeing the highest level of hygiene. The cable-free plug-in system for the sealing bars can be easily removed,
making it easy to clean.
1: Time-controlled digital control Z 2000
Very easy operation · Large vacuum display · Quick stop for liquid packaging · Continuous operation/service button · Parameters (vacuum/sealing time/gas) can be set
individually
ESD version
Our machines are equipped with stainless steel lids. All surfaces are electrically conductive. Critical surfaces
have been coated with dissipative plastics, and feature a bleeder resistance of 1-6 Ohm/sq, compliant with ESD
standard NE 61340-5-1.
2: Programmable sensor control Z 3000
Very easy operation · Precise vacuum and gas sensor · 99 Memory locations · Vacuum
process up to the vaporization point · Soft air system · Stage-vacuum allows the entrapped air to escape from the product · Quick stop · Gas purging = Multiple vacuum
and gas cycles · Continuous operation/service button · Splash-proof
H2O Sensor/Evaporation point detection
The falling pressure in the vacuum chamber means the boiling point of moist or liquid products is reached
quickly. To protect your product against unnecessary loss of moisture due to evaporation, an intelligent sensor
detects the vapour phase and ends the vacuum-packing process safely and reliably. You benefit by preventing
weight loss to your product and contamination of the vacuum chamber.
Service
In order to reduce your service costs and help prevent downtimes due to maintenance work, a particular focus
has been placed on a service-friendly design. Individual components are easily accessible and clearly visible. A
service programme guarantees a long service life for your vacuum pump.
OPTIONS
1
T E C H N I C A L DATA
1: Undercarriage available for all table models
Elegant design · Stable · Integrated bag storage compartment · Locking rollers ·
Made completely of stainless steel
2: Control extern
Control fixed onto a lateral stainless steel arm or position according to agreement
with customer
3: ESD version
Our machines are equipped with stainless steel lid · All surfaces are electrically conductive.
4: Inspection glass · Available for models with stainless steel lid
5: Gas flush device · Available for all models
6: Also available · Special voltages · Slow air release · Suction device for gastronorm
containers · A range of lid heights and pump sizes
Power vacuum function
Because raw meat contains a large proportion of water, there is a risk of blistering in the vacuum bag. To avoid
this risk, and to increase the visual packaging quality, our machines come with a power vacuum function, which
forces unwanted air bubbles out of the bag.
Helmut Boss Verpackungsmaschinen KG
Zum Wingert 5 · D-61352 Bad Homburg · Tel. +49 (0) 6172 457097 · Fax +49 (0) 6172 44139
www.vacuum-boss.com · info@vacuum-boss.com
2
ESD, SPECIAL AND VERTICAL MACHINES
Download PDF
Similar pages