Si500 Accessories - Motorola Solutions

VIDEO SPEAKER MICROPHONE
ACCESSORIES
BROCHURE | Si500 ACCESSORIES
PAGE 1
The Si500 Video Speaker Microphone (VSM) is part of the Digital Evidence Management Solution, a
complete solution for digital evidence capture, storage, and management, bringing together content from
various sources and keeping it protected so it’s admissible in a court of law.
The Si500 combines a body camera, remote speaker microphone and touchscreen content management
interface, eliminating the need for officers to carry multiple devices. With an intuitive user interface that is
easy to operate, your officers can focus on the mission. This innovative VSM combines intelligent recording
with the best-in-class audio of APX radios. It delivers the mission critical sight, sound and security required
to reliably deliver the truth.
With the Si500 VSM, you can ensure that the evidence captured is accurate and representative of how
events actually unfolded. These accessories allow you to use it in the way that works best for you.
TABLE OF CONTENTS
AUDIO SOLUTIONS ............................................................................................................................................................. 3
CARRY SOLUTIONS ............................................................................................................................................................ 3
CARRY HOLSTERS ..................................................................................................................................................... 3
PETER JONES DOCKING SOLUTIONS ....................................................................................................................... 4
SHOULDER STRAPS ................................................................................................................................................... 5
ENERGY SOLUTIONS .......................................................................................................................................................... 6
IMPRES™ 2 CHARGERS AND BATTERIES .................................................................................................................. 6
STANDARD CHARGERS AND BATTERIES ................................................................................................................. 7
VEHICLE MOUNTS ............................................................................................................................................................. 11
REPLACEMENT PARTS ....................................................................................................................................................... 11
BROCHURE | Si500 ACCESSORIES
PAGE 2
AUDIO SOLUTIONS
RECEIVE-ONLY EARPIECE PMLN7900
With a clear comfort tube designed for all-day wear, the
receive-only earpiece delivers clear, discreet communication.
The 3.5mm connector plugs into the audio jack on the VSM.
CARRY SOLUTIONS
We designed a variety of carry solutions that deliver comfort, flexibility and a secure fit while providing
optimal wearing positions for accurate video capture. Whether you’re tall, short, big or small, we offer
a carry solution that best meets your unique job requirements. Our carry holsters allow the VSM to be
inserted with the screen facing in for discreet recording or facing out to serve as deterrent to antagonistic
behavior. The five microphone array and public safety grade speaker are optimized for any holster
orientation. The universal mounting bracket on the carry holsters gives you the flexibility to attach different
mounting solutions.
CARRY HOLSTERS
CARRY HOLSTERS FEATURE COMPARISON
CARRY HOLSTER
WITH ROTATING CLIP
CARRY HOLSTER
WITH POCKET CLIP
CARRY HOLSTER WITH
PETER JONES KLICK FAST
Item Number
PMLN7698
PMLN7699
PMLN7700
Hard mounts to uniform
No
Optional
Required
Rotating
360 Degree
No
6 Positions
Suggested for use with
Shoulder strap or vest with
Molle straps or nylon loops
Pockets on Class A uniforms
or vests
Class A uniforms, vests or coats
Attachment
Flexible
Flexible or Fixed
Fixed
Wearing position
Shoulder
Pocket
Flexible
CARRY HOLSTER WITH ROTATING CLIP PMLN7698
With its 360 degree rotating clip, this carry holster was designed for a variety of wearing
positions. The clip was specifically designed for use with Motorola shoulder straps and
other one inch straps such as tactical vest Molle straps. The D-ring located on the clip
allows for additional tethering options. This ships standard with your VSM.
BROCHURE | Si500 ACCESSORIES
PAGE 3
CARRY HOLSTER WITH POCKET CLIP PMLN7699
This carry holster features a rugged, low-profile metal clip designed to
clip to a shirt or vest pocket, making it a secure and effortless solution.
Just slide it into your pocket and you’re ready to go. This design provides
an extremely secure fit, ensuring the clip stays in place during a foot
chase or physical altercation. Included optional screws allow you to
fasten the clip to your uniform permanently.
PETER JONES DOCKING SOLUTIONS
When paired with the Carry Holster with Peter Jones Klick Fast (PMLN7700), these docking solutions
provide an extremely secure fit, making them ideal for foot chases or physical altercations. To complete
the solution, the Carry Holster with Peter Jones Klick Fast (PMLN7700) must be ordered separately.
CARRY HOLSTER WITH PETER JONES KLICK FAST PMLN7700
This unique clip has been designed with the Peter Jones Klick Fast Connector to provide an extremely
secure fit. It requires a Peter Jones Dock, which permanently mounts to your uniform. The holster
then slides effortlessly into the uniform mounted dock. Once docked, the holster can be rotated
while staying mounted. Undocking the holster takes only seconds - simply rotate it to the 180 degree
inverted position and the holster slides free. The Peter Jones Dock must be ordered separately. The
Peter Jones Klick Fast Connector is compatible with all Peter Jones Klick Fast Docks.
PETER JONES DOCK
WALN4307
This Peter Jones Dock
hard-mounts to your uniform
with screws.
PETER JONES
SEW-ON DOCK
GMDN0386
This Peter Jones Dock
is permanently stitched
to your uniform.
BROCHURE | Si500 ACCESSORIES
PAGE 4
SHOULDER STRAPS
These straps come in two configurations, giving you the choice to wear your VSM on
the left or right shoulder. The shoulder straps attach to your epaulet strap to optimize
the location of your camera, and were designed to distribute the weight of the VSM
evenly, making it more comfortable for daily wear. With the wearing position designed
for your shoulder, handling a weapon will not interfere with your video recording.
The ends of the shoulder straps are secured to the uniform with two snaps or pins.
Shoulder straps are easily removed when you change uniforms. The Snap and Screw Kit
(HKLN4634) and Pin Backer (PMLN7572) ship included with the shoulder straps.
SNAP AND
SCREW KIT
HKLN4634
This replacement kit is
designed to screw the
snap to your uniform.
To complete the solution, pair the shoulder straps with the Carry Holster with
Rotating Clip (PMLN7698), which ships standard with your VSM.
PIN BACKER
PMLN7572
SHOULDER STRAP LEFT
PMLN7415
Designed to secure the VSM
to your left shoulder.
BROCHURE | Si500 ACCESSORIES
SHOULDER STRAP RIGHT
PMLN7416
Designed to secure the VSM
to your right shoulder.
Temporarily fasten
the VSM shoulder
straps to your
uniform with these
pin backers.
PAGE 5
ENERGY SOLUTIONS
CHARGERS
PART
NUMBER
CHARGE TIME:
BATTERY-ONLY CHARGING
DESCRIPTION
VSM
CHARGE
IMPRES 2 POCKETS
RADIO
CHARGE
POCKETS
DISPLAY
CHARGING
ANALYZER
USB
CHARGE TIME:
IN-DEVICE CHARGING
SLIM
(1950mAH)
PMNN4507
STANDARD
CAPACITY
(2925mAH)
PMNN4508
HIGH
CAPACITY
(3750mAH)
PMNN4530
SLIM
(1950mAH)
PMNN4507
STANDARD
CAPACITY
(2925mAH)
PMNN4508
HIGH
CAPACITY
(3750mAH)
PMNN4530
1h 40m
2h 20m
1h 50m
3h 15m
4h 20m
5h 30m
3h 20m
4h 40m
6h 20m
NNTN8897
IMPRES 2
Multi-Unit Charger
6
6
1
–
NNTN8860
IMPRES 2
Single-Unit Charger
–
1
–
2
PMPN4085
Standard
Multi-Unit Charger
–
6
–
–
–
–
2h 50m
3h 50m
4h 44m
3h 40m
5h 30m
Not
compatible
PS000150A11
Micro-USB Wall Charger
–
–
–
–
–
1
3h 20m*
4h 50m*
6h 16m*
2h 20m
4h 20m
5h 11m
PMPN4169
Vehicular Charger
–
–
–
–
–
1
3h 20m*
4h 50m*
6h 16m*
2h 20m
4h 20m
5h 11m
Not Compatible
*Requires Battery Tray PMPN4119
BATTERIES
OPERATING TIME IN HOURS*
PART
NUMBER
DESCRIPTION
PMNN4530
High Capacity Battery
PMNN4508
Standard Battery
PMNN4507
Slim Battery
IMPRES 2
Dimensions
(l x w x d)
Weight
IP67
2.1 x 1.5 x 0.7 in
(54 x 39 x 19 mm)
2.8 oz
(80 g)
6+
IP67
2.1 x 1.5 x 0.6 in
(54 x 39 x 15 mm)
2.1 oz
(60 g)
not recommended
IP67
2.1 x 1.5 x 0.4 in
(54 x 39 x 10 mm)
1.4 oz
(40 g)
mAH
Pre-buffering OFF
With Pre-buffering ON
IP Rating
3750
21
8.5+
–
2925
18+
–
1950
10+
**Assumes 5/5/90 duty cycle, 1.5 hrs video recording, 1 hr touch screen interaction, wired configuration, brand-new, fully-charged battery at 77 °F (25 °C).
IMPRES™ 2 CHARGERS AND BATTERIES
IMPRES 2, designed for your Si Series VSM and
APX™ Series radios, is a next-generation energy
system that’s safer and smarter, while keeping
you powered for even longer.
CHARGER PEDESTAL
NNTN8929
With this pedestal insert, you
can charge your VSM while it’s
cabled to your APX radio.
BROCHURE | Si500 ACCESSORIES
IMPRES 2 MULTI-UNIT CHARGER NNTN8897
Charge six APX Series radios and six VSMs or batteries simultaneously with this IMPRES 2 Multi-Unit
Charger. The four button operated master display serves as battery analyzer, provides charge status
and allows you to customize your battery charge for extended storage. Additional LEDs provide charge
status for each pocket. To charge the VSMs when tethered to the APX radio as shown, order optional
pedestals (NNTN8929) separately. Includes US power supply.
PAGE 6
IMPRES 2 MULTI-UNIT CHARGER
5
Diagnostics
•Battery Age
•Overall Health
•Performance
and Usage Data
•Capacity
• Charge Status
• Calibration
• End of Life
1
VSM Charging Pocket (x6)
2
Radio Charging Pocket (x6)
3
LED Charge Status Indicators
4
Programming and Fleet
Management USB Port
IMPRES 2 SINGLE UNIT CHARGER NNTN8860
This IMPRES 2 single unit radio charger features enhancements including >100%
increase in charge rate and an enable/disable calibration switch. Two integrated USB
ports allow you to charge your VSM and a spare battery in the Battery Charging Tray
(PMPN4119) while your APX radio charges in the main pocket. Battery Charging Tray
and USB cables not included.
IMPRES 2 BATTERIES
IMPRES 2 VSM batteries are IP67 rated, which means
they can be fully submersed in one meter of water for
up to 30 minutes. Designed with a rugged housing,
they are as tough as your VSM. Further, IMPRES 2
batteries, when combined with an IMPRES 2 charger,
deliver 60% more charging cycles than traditional
Lithium Ion batteries.
BROCHURE | Si500 ACCESSORIES
IMPRES 2 HIGH-CAPACITY BATTERY
PMNN4530
3750 mAh Li-Ion IP67-rated submersible battery.
PAGE 7
STANDARD CHARGERS AND BATTERIES
Motorola energy solutions are designed to charge your VSM wherever you are. Select the
solution that’s right for you - from a sleek multi-unit charger ideal for public safety agencies, to
a simple charging tray that allows you to charge a spare virtually anywhere. Motorola Original®
Batteries are as tough as your VSM. We test them in real-world conditions to ensure they are
reliable. You can count on them in the most critical situations.
STANDARD CHARGERS
STANDARD MULTI-UNIT CHARGER
WITH 6 POCKETS
PMPN4085
This compact, drop-in charger allows you to charge
up to six VSMs or six batteries simultaneously.
Designated LEDs provide charge status for each
pocket. US power supply included.
BATTERY CHARGING TRAY
PMPN4119
Designed to charge a spare battery on the go, you can take
this charging tray with integrated Micro USB port virtually
anywhere. Just snap in the battery and charge it via a
USB cable alongside a computer, vehicular adapter or wall
charger – the choice is yours. USB cable not included.
MICRO USB CABLE
You can also use the battery charging tray with the
IMPRES™ 2 Single Unit Charger (NNTN8860). The singleunit charger features two integrated USB ports, enabling
convenient charging of the VSM and other wireless
solutions while charging your APX radio simultaneously.
This USB to Micro USB Cable is for
use with the battery charging tray as
well as other devices and chargers
that enable USB charging.
BROCHURE | Si500 ACCESSORIES
CB000262A01
PAGE 8
MICRO-USB WALL CHARGER PS000150A11
Charge your VSM on-the-go with this Micro USB wall charger
with US plug.
BROCHURE | Si500 ACCESSORIES
VEHICULAR ADAPTER PMPN4169
This simple plug-and-go vehicular adapter,
allows you to charger your VSM while en route.
PAGE 9
STANDARD BATTERIES
These Motorola Original batteries are built as
tough as your VSM. With an IP67 rating, they are
submersible in one meter of water for up to 30
minutes. When placed in an IMPRES 2 multi-unit
charger pocket with display, you will be able to
receive battery data such as chemistry and mAh.
STANDARD
CAPACITY BATTERY
PMNN4508
*
2925 mAh Li-Ion IP67-rated
submersible battery.
SLIM BATTERY
PMNN4507*
Slim, 1950 mAh Li-Ion
IP67-rated submersible
battery.
* Customizable charging and health diagnostics are not available when you charge
standard batteries with an IMPRES 2 charger.
BROCHURE | Si500 ACCESSORIES
PAGE 10
VEHICLE MOUNTS
Secure your video speaker microphone to these vehicle mounts in your
car to record video safely while driving. Vehicle mounts also capture a
different vantage point when the officer is responding to an incident
outside the vehicle.
REPLACEMENT
PARTS
VSM CABLE
PMKN4183
For agencies that prefer to have their
VSMs tethered to the radios, this cable
transforms the VSM from a wireless to a
wired device. The cable has a simple but
rugged design, ensuring it can withstand
harsh environments.
SNAP AND SCREW KIT
HKLN4634
This replacement kit is designed to
screw the snap to your uniform.
WINDSHIELD MOUNT HKLN4656
VISOR MOUNT HKLN4657
Designed with a suction cup, this mount
attaches to the windshield of your vehicle,
allowing you to use your VSM while driving.
Setup is quick and effortless, making it a
convenient solution for officers.
For a more permanent solution, this visor
mount screws into the car securely. The
required installation makes this mount a
very secure solution.
BROCHURE | Si500 ACCESSORIES
PIN BACKER
PMLN7572
Temporarily fasten the VSM shoulder
straps to your uniform with these pin
backers.
PAGE 11
Motorola Solutions, Inc. 500 West Monroe Street, Chicago, Il 60661 U.S.A. motorolasolutions.com
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and
are used under license. All other trademarks are the property of their respective owners. © 2017 Motorola Solutions, Inc. All rights reserved. 06-2017
PAGE 12
Download PDF
Similar pages