cUL Listed Power and Control 58V Specifications

COOLEDGE CUL LISTED POWER & CONTROL (58V) SPECIFICATIONS
PROJECT
REFERENCE TYPE
SPECIFIED BY
QUANTITY
DATE
NOTE
For Luminous Surfaces
SYSTEM OVERVIEW
Control on the scale of nature enables large luminous
surfaces using industry standard protocols.
1
AC Mains (Line)
Power Supply
58VDC
Control Input
Cooledge
Control Module
1
Power Supply: converts AC mains (line) power to
safe low voltage 58V power
2
Cooledge Control Module: receives control input
signals to dim and/or tune Cooledge Lighting
Systems. Output is max. 90W per channel
• TILE Interior
• TILE Tunable White
• LINE
2
CERTIFICATIONS
0-50°C (32-122°F)
Storage Temp.
-40 - +80°C (-40 - +176°F)
Relative Humidity
90% max (non-condensing)
Operating Voltage
Nominal 58VDC
WARRANTY
TEM WA
RR
SYS
E
5Y
A
R
FEATURES
SY
5
TY
AN
R
Y
Operating Temp.
NT
Indoor, dry location only
5Y
EA
Location
A
GENERAL
S T E M WA R
R
5 Year Limited Warranty:
Parts and workmanship when
used with a Cooledge approved
power supply.
―― Compatible with a full range of industry standard control protocols from simple analog (0-10V), to digital (DALI/DMX), and
wireless (Casambi) options
―― Up to 4 @ 90W channels of power enables larger luminous surfaces while reducing the number of line voltage connections
required
―― Simple and economic control for dynamic illumination that includes deep dimming and tunable CCT
―― Incorporates Cooledge’s proprietary “C-Tune” technology that significantly increases the affordability of tunable CCT
―― Test mode available for on-site troubleshooting.
Cooledge Lighting reserves the right to change materials or modify the design of its product
without notification as part of the company’s continuing product improvement program.
PSD-0007-R00 011918 1/6
™
COOLEDGE CUL LISTED POWER & CONTROL (58V) SPECIFICATIONS
1 POWER SUPPLIES AND LED DRIVERS =
1
Purpose: Converts AC mains (line) power to nominal 58VDC power.
15.4”
11”
16.3”
2.8”
4”
4.9”
1.7”
1.5”
3”
90W LED Driver
200W Power Supply
400W Power Supply
SPECIFICATIONS
90W LED Driver
200W Power Supply
400W Power Supply
Dimensions (in)
11 x 4 x 3
15.4 x 2.8 x 1.5
16.0 x 4.9 x 1.7
Maximum Output Power (W)
90
200
400
Output Voltage (VDC)
58
58
57
Input Voltage Range (VAC)
Nom. 120-277
Nom. 120-277
Nom. 120-277
Efficiency (% at full load –
typ.)
89 (120V), 92 (277V)
93.5 (typ)
95 (277V)
Power Factor (full load)
0.998
0.98 (120V)
0.98 (120V), 0.95 (277V)
Total Harmonic Distortion (%)
< 10 (full load)
≤ 20 (>50% load)
≤ 20 (>40% load)
Start-up Time (sec)
1.0
0.5
0.5
Max. Inrush Current
per NEMA 410-2015
75A (per NEMA 410)
35A (per NEMA 410)
Dimming Frequency (Hz)
1800
Not Applicable
Not Applicable
Dimming Range (%)
1 - 100
Not Applicable
Not Applicable
Certification
UL Listed
UL Listed
UL Listed
Rated Lifetime (hr)
70,000
62,000
62,000
Weight
4.88lbs / 2214g
3.39lbs / 1538g
6.85lbs / 3107g
HOW TO ORDER
Output Power
Ordering Code
Description
90W
EPSD-090-1CH-58V-010
Enclosed LED Driver, 1% Dimming, 90W, 1 Channel, 58V, 0/1-10V, 1.8kHz
200W
EPSS-200-58V
Meanwell (configured for Cooledge) 200W Power Supply, 58V (UL Listed) with integrated wiring enclosure
400W
EPSS-400-58V
Meanwell (configured for Cooledge) 400W Power Supply, 58V (UL Listed) with integrated wiring enclosure
PSD-0007-R00 011918 2/6
™
COOLEDGE CUL LISTED POWER & CONTROL (58V) SPECIFICATIONS
2 COOLEDGE CONTROL MODULE: GENERAL =
2
Purpose: Cooledge Control Modules perform two functions: 1) convert a single incoming DC power source to multiple Class 2
output (<100W) channels; and 2) convert incoming control signals to dimming and/or CCT tuning output to operate Cooledge
TILE and LINE products.
There are 3 types of Control Modules depending upon the TILE/LINE product to be controlled:
• SCT = Static Color Temperature > SCT Control Modules are used for dimming only with TILE Interior or LINE products.
• TNW = Tunable White > TNW Control Modules are used to select CCT and dim TILE Tunable White when used for constant
lumen output across all CCTs in the range.
• DTW = Dim-to-Warm > DTW Control Modules are used to select a CCT + Dim combination when used with the dim-to-warm
TILE Tunable White product.
AC Mains (Line)
Power Supply
AC Mains (Line)
90W
0/1-10V
DALI
DMX
Wireless (Casambi)
90W
Cooledge
Control Module
90W
90W
Power Supply
90W
TILE Interior/LINE
TILE Interior/LINE
TILE Interior/LINE
0/1-10V
DALI
DMX
Wireless (Casambi)
Cooledge
Control Module
90W
TILE Interior/LINE
Static Color Temperature (SCT)
TILE Tunable White
(TNW or DTW)
TILE Tunable White
(TNW or DTW)
Tunable White (TNW) & Dim-to-Warm (DTW)
2.6”
8.7”
0.875” holes (suitable
for nom. ½” conduit
fittings)”
1.4”
SPECIFICATIONS
Dimensions (in)
8.7 x 2.6 x 1.4
Output Power (W per channel)
90 (Class 2): SCT = up to 4CH; TNW/DTW = 2 CH
Input Power (W)
Up to 400 (Class 1)
Circuit Protection
Overcurrent, Overvoltage, Reverse Polarity, Short Circuit
Dimming Frequency (Hz)
3950
Dimming Range (%)
0.05 - 100 (SCT, DTW); 1 - 100 (TNW)
Standalone Test Mode
Available
Maximum Control Current (Source)
0.5 mA
Max. Wire Size
12 AWG
Rated Lifetime (hr)
70,000
EMI
FCC Part 15, Class B
Weight
.47 lbs
PSD-0007-R00 011918 3/6
™
COOLEDGE CUL LISTED POWER & CONTROL (58V) SPECIFICATIONS
3 COOLEDGE CONTROL MODULES: DALI AND 0-10V
Control Modules identified as “DALI” have dual protocol capability:
1. if the DALI input is used the module will operate based on incoming DALI control signals and each output channel can be
controlled independently.
2. if 0-10V input is used, the module will operate based on incoming 0-10V signals and all output channels will be controlled
by this input.
DALI INPUT
DA+
DAGND
PSU 58V
400W
1
DALI OUTPUT
DA+
DAGND
Option: 1
2
DIM
PURPLE (+)
GREY (-)
0/1-10V
Option: 2
Static Color Temperature (SCT)
DALI INPUT
DA+
DAGND
PSU 58V
200W
1
DALI OUTPUT
DA+
DAGND
Option: 1
2
PURPLE (+)
GREY (-)
CCT
DIM
PURPLE (+)
GREY (-)
0/1-10V
0/1-10V
Option: 2
Tunable White (TNW) & Dim-to-Warm (DTW)
HOW TO ORDER
Input Control Protocol
Ordering Code
Description
0-10V & DALI
CTR-TNW-DAL-58V
200W (max.) Control Module for Tunable White, DALI/0-10V, 58V, Dual Channel x 2, 1% Dimming
0-10V & DALI
CTR-DTW-DAL-58V
200W (max.) Control Module for Dim to Warm, DALI/0-10V, 58V, Dual Channel x 2, 0.05%
Dimming
0-10V & DALI
CTR-SCT-DAL-58V
400W (max.) Control Module, DALI/0-10V, 58V, Single Channel x 4, 0.05% Dimming
PSD-0007-R00 011918 4/6
™
COOLEDGE CUL LISTED POWER & CONTROL (58V) SPECIFICATIONS
4 COOLEDGE CONTROL MODULES: DMX
Control Modules identified as “DMX” operate on control signals received from a DMX controller and each output channel can
be controlled independently.
PSU 58V
400W
DMX INPUT
D+
DGND
DMX OUTPUT
D+
DGND
When installing the final controller
(termination point) in a network use
the provided jumper on the
indicated header.
Static Color Temperature (SCT)
DMX INPUT
D+
DGND
PSU 58V
200W
DMX OUTPUT
D+
DGND
When installing the final controller
(termination point) in a network use
the provided jumper on the
indicated header.
1= On, 0=Off
Dipswitches 4-12 are used for addressing
- Switches 1 - 3: Mode selection switches
- Switches 4 - 12: Addressing switches
Tunable White (TNW) & Dim-to-Warm (DTW)
HOW TO ORDER
Input Control Protocol
Ordering Code
Description
DMX
CTR-TNW-DMX-58V
180W (max.) Control Module for Tunable White, DMX, 58V, Dual Channel x 2, 1% Dimming
DMX
CTR-DTW-DMX-58V
180W (max.) Control Module for Dim to Warm, DMX, 58V, Dual Channel x 2, 0.05% Dimming
DMX
CTR-SCT-DMX-58V
360W (max.) Control Module, DMX, 58V, Single Channel x 4, 0.105% Dimming
PSD-0007-R00 011918 5/6
™
COOLEDGE CUL LISTED POWER & CONTROL (58V) SPECIFICATIONS
5 COOLEDGE CONTROL MODULES: WIRELESS (CASAMBI)
Control Modules identified as “CAS” operate on control signals received from a Casambi (Bluetooth Low Energy wireless
protocol) enabled device including a wireless switch, smartphone or tablet.
2.6”
Smartwatch
Tablet
Smartphone
1.4”
Enabled DeviceSwitch
Push button Casambi
Xpress
Cooledge “CAS” Control Module
Images Courtesy of Casambi
PSU 58V
400W
CASAMBI APP OR CASAMBI SOFTWARE
Static Color Temperature (SCT)
PSU 58V
200W
CASAMBI APP OR CASAMBI SOFTWARE
Tunable White (TNW) & Dim-to-Warm (DTW)
HOW TO ORDER
Input Control Protocol
Ordering Code
Description
Wireless (Casambi)
CTR-TNW-CAS-58V
180W (max.) Control Module for Tunable White, Casambi wireless, 58V, Dual Channel x 2, 1% Dimming
Wireless (Casambi)
CTR-DTW-CAS-58V
180W (max.) Control Module for Dim to Warm, Casambi wireless, 58V, Dual Channel x 1, 0.05% Dimming
Wireless (Casambi)
CTR-SCT-CAS-58V
360W (max.) Control Module, Casambi wireless, 58V, Single Channel x 4, 0.05% Dimming
PSD-0007-R00 011918 6/6
™
Download PDF
Similar pages