RENOCEM PGR
Repair Mortar
Description
Properties
Renocem PGR is a polyester compound which comes
Minimum Application Temperature 5°C
in a pre-weighed, two part, resin repair and grouting
Compressive Strength
mortar. The mixed product produces a high early
(ASTM D-66)
strength mortar for rapid and efficient repairs to precast
Flexural Strength
and insitu concrete.
(ASTM D-790)
Applications
Tensile Strength
Renocem PGR is used for the rapid repair, jointing and
(ASTM D-638)
>90.0 N/mm²
25.0 N/mm²
15.0 N/mm²
bedding of concrete and masonry, the repair of insitu
and precast concrete, filling holes and pockets, fixing
Gel Times
(Minutes)
steps and rungs into manholes and for the protection of
5°C
120
steel reinforcement.
10°C
45
20°C
20
30°C
10
Benefits
! Accelerated strength
! Improved setting times
! Non-chloride
! Non-corrosive
! Multi use
Cure Time
Before Loading
(Hours)
5°C
9
10°C
7
20°C
3
30°C
1
! Cold weather working
Standards
Renocem PGR is produced in accordance with the
ISO 9001 Quality Management Standard and the ISO
14001 Environmental Management Standard.
RENOCEM PGR
Repair Mortar
Compatibility
Notes
Renocem PGR is compatible with all types of EN 197
Preparation: Repair of precast and insitu concrete
cement systems.
units: All loose and flaky cementitious residues as well as
Storage
all contamination such as mould oils and grease should
Renocem PGR should be stored undercover and
be removed for the application of the repair mortar. Use
protected from extreme temperatures, if stored
of wire brushing or light grit blasting to ensure full
unopened within the range 5°C and 30°C the product
cleansing of repair area is recommended. Wherever
will have a minimum shelf life of 12 months.
possible delineate the perimeter of the area to be
Chemical Resistance
repaired with a chase to provide a straight edge for the
Renocem PGR when cured correctly is resistant to
fresh, ground and sea waters, oil, petrol, grease and most
acids, alkalis and solvents.
mortar to be placed against and to avoid feather edging.
Mixing: Complete packs of resin and catalysed filler
should be used. Mix either manually or mechanically, to
give a smooth consistency. Place within the get time of
Environmental
the grout.
All local and national regulations on the transport,
Precautions: Renocem PGR polyester resin may be
storage, use and waste treatment of chemicals in
used at substrate temperatures of 5°C and above. Creep
concentrated or diluted form and as working solutions
of the resin may become significant at operating
must be obeyed. Further specific information on the
temperatures above 40°C.
products can be found in the Material safety Data Sheets
labels.
Cleaning: Tools and equipment can be cleaned with a
solvent cleaner.
Waste Disposal: All waste waters must be treated in
accordance with national legislation and local
regulations prior to discharge to the sewer.
Packaging
Refer to the Material Safety Data Sheet for full details.
supplied. The user should also pay strict attention to
information and hazard symbols shown on product
25 kg buckets.
Please consult the OSCRETE Technical Department
for advice on admixture selection.
Disclaimer
The physical properties quoted are typical, and should not be taken as a
specification. The information supplied in our literature is based on data and
experience and is given in good faith. Our policy is one of continuous research
and development and we reserve the right to update this information at any
time; customers should therefore ensure they have the latest issue. Whilst we
guarantee the consistent high quality of our products, we have no control over
the circumstances in which our materials are used, site conditions or the
execution of the work and are therefore unable to accept any liability for any
loss or damage which may arise as a result thereof. Materials are supplied in
accordance with our standard conditions of sale.
OSCRETE is a division of Christeyns UK Ltd.
Rutland Street
Bradford
West Yorkshire
BD4 7EA
United Kingdom
Telephone:
Fax:
+44 (0)1274 393286
+44 (0)1274 309143
e-mail:
Website:
info@oscrete.co.uk
www.oscrete.co.uk
PDS 7353 Rev 03 18/01/2016
Download PDF
Similar pages