User`s Manual - Firmware Center

Table of Contents
Table of Contents.............................1
Usage Notice.....................................2
Precautions..........................................2
Safety Labels of This Machine...........12
Regulation & Safety Notices..............13
Other Information...............................18
Introduction.....................................19
Product Features...............................19
Package Overview.............................20
Product Overview..............................21
Connection Ports................................... 22
Control Panel........................................ 23
Remote Control..................................... 24
Remote Control Battery Installation...... 26
Remote Control Operating Range......... 27
Audio..................................................... 48
Options.................................................. 49
3D . ....................................................... 51
Troubleshooting.............................52
Replacing the lamp........................57
Appendices.....................................58
List of Compatible Signals.................58
Configurations of Terminals...............61
Terminal : Analog RGB (Mini D-sub
15 pin)................................................... 61
Specifications.....................................62
Trademarks........................................63
Basic Operations............................28
Connecting the Projector...................28
Connect to Computer/Notebook............ 28
Connect to Video................................... 29
Powering On/Off the Projector...........30
Powering On the Projector.................... 30
Powering Off the Projector.................... 31
Warning Indicator.................................. 32
Adjusting the Projected Image...........33
Adjusting the Height of Projector
Image.................................................... 33
Adjusting the Projector Zoom and
Focus.................................................... 34
Adjusting Projection Image Size........... 34
User Settings..................................36
On Screen Display (OSD)..................36
How to operate...................................... 36
Menu Tree............................................. 37
Picture................................................... 41
Position................................................. 44
Setting................................................... 46
1
English
English
Usage Notice
Precautions
Follow all warnings, precautions and maintenance as
recommended in this user’s guide to maximize the life of your
unit.
■ Warning-
Indicates a potentially hazardous situation which, if
instructions are not followed, could result in death or
serious injury.
■ Caution-
Indicates a potentially hazardous situation which, if
instructions are not followed, may result in minor or
moderate injury or damage to property.
■Warning-
■Warning-
■ Warning-
■ Warning-
■ Warning-
■ Warning-
■ Warning-
■ Warning-
2
English
Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers holding water
or any other liquids, on or close to this machine. Fire
or electric shock could result from spillage or if such
objects or substances fall inside this machine
Keep the machine and attachments out of the reach of
children. If the machine is near children, it may cause
injury.
Plastic bags can be dangerous, please do not leave
near babies and young children. To avoid the threat
of suffocation, please keep away from their nose and
mouth.
Do not use any power sources other than those that
match the specifications shown in this manual. Doing
so could result in fire or electric shock.
Do not damage, break, or modify the power cord.
Also, do not place heavy objects on the power cord,
or pull the cord or bend it severely. Doing so could
result in fire or electric shock.
Touching the prongs of the power cable’s plug with
anything metallic constitutes a fire and electric shock
hazard.
The supplied power cord is for use with this machine
only. Do not use it with other appliances. Doing so
could result in fire or electric shock.
It is dangerous to handle the power cord plug with
wet hands. Doing so could result in electric shock.
Usage Notice
■ Warning-
■ Warning-
■ Warning-
■ Warning-
■ Warning-
■ Warning-
■ Warning-
Be sure to disconnect the plug from the wall outlet at
least once a year and check for the following:
■There are burn marks on the plug.
■The prongs on the plug are deformed.
If any of the above conditions exist, do not use the
plug and consult your dealer or service representative.
Use of the plug could result in fire or electric shock.
Be sure to disconnect the power cord from the wall
outlet at least once a year and check for the following:
■The power cord’s inner wires are exposed, broken,
etc.
■The power cord’s coating has a crack or dent.
■When bending the power cord, the power turns off
and on.
■Part of the power cord becomes hot.
■The power cord is damaged.
If any of the above conditions exist, do not use
the power cord and consult your dealer or service
representative. Use of the power cord could result in
fire or electric shock.
Do not use the connection cable if it is deformed,
cracked, or damaged. Doing so could result in
fire or electric shock. If the connection cable is
deformed, cracked, or damaged, contact your service
representative to request a replacement cable.
When using an extension cord or power strip, only
connect equipment whose total power consumption
is within the power rating for the extension cord or
power strip. If the power rating is exceeded, it may
cause heat buildup and result in fire.
Plastic bags can be dangerous, please do not leave
near babies and young children. To avoid the threat
of suffocation, please keep away from their nose and
mouth.
If the machine emits smoke or odours, or if it behaves
unusually, you must turn off its power immediately.
After turning off the power, be sure to disconnect the
power cord plug from the wall outlet. Then contact
your service representative and report the problem.
Do not use the machine. Doing so could result in fire
or electric shock.
If metal objects, or water or other fluids fall inside this
machine, you must turn off its power immediately.
3
English
English
Usage Notice
■ Warning-
■ Warning-
■ Warning-
■ Warning-
■ Warning-
■ Warning-
■ Warning-
■ Warning-
4
English
After turning off the power, be sure to disconnect the
power cord plug from the wall outlet. Then contact
your service representative and report the problem.
Do not use the machine. Doing so could result in fire
or electric shock.
Never operate this unit on AC power during a thunderstorm. If you see lightning or hear thunder, never
touch the unit, cables and/or peripherals. An electric
surge caused by the storm, may result in an electrical
shock or damage to the unit.
If the machine topples, or if a cover or other part gets
broken, you must turn off its power immediately.
After turning off the power, be sure to disconnect the
power cord plug from the wall outlet. Then contact
your service representative and report the problem.
Do not use the machine. Doing so could result in fire
or electric shock.
Do not use lens cap when projector is powered on
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on
the product.
Do not place or keep the projector within the reach of
the children. It may fall or tip over, possibly causing
serious injury
Do not remove any covers or screws that are not
mentioned in this manual. There are high voltage
components inside the machine that may cause electric
shock. Contact your service representative if any of the
machine’s internal components require maintenance,
adjustment, or repair.
Do not disassemble or modify the machine. Doing so
may cause injury or malfunction.
Installing the Projector on a Wall or Ceiling:
a) Do not attempt to clean or replace parts for a
machine that is installed in a high location on a wall or
ceiling. Doing so may cause it to fall down, resulting
in an injury.
b) Do not open the lamp cover of a machine that is
installed on a wall or ceiling. Doing so may cause the
lamp cover to fall down. If the lamp is broken, pieces
of glass may fall and cause an injury.
Usage Notice
c) Contact your sales or service representative to clean
or replace parts for a machine that is installed on a
wall or ceiling.
d) If a machine is incorrectly installed on a wall or
ceiling, it may fall down and cause an injury. Contact
your sales or service representative if you want to
install a machine on a wall or ceiling.
e) Do not obstruct the machine’s vents. Doing so risks
fire caused by overheated internal components.
f) For users, do not install the projector by yourself.
Contact your sales or service representative if you
want to install the projector on a wall or ceiling.
g) For sales or service representatives:
- Use brackets that are strong enough to support the
projector.
* PJ X2340/S2340 Series weighs 2.4kg.
- The projector must be installed in a location that
is sturdy enough to support the full weight of the
projector and brackets.
- Use only the screws (three M4~16 screws) provided
with the projector to attach the brackets to the
projector.
■ Caution-
Keep the machine away from humidity and dust.
Otherwise a fire or an electric shock might occur.
Do not place any objects on the machine. Doing
so may cause the machine to topple over, possibly
resulting in injury.
Do not place the machine on an unstable or tilted
surface. If it topples over, an injury might occur.
Do not place the machine or use it in an environment
where it might get wet such as from snow, rain, or
being near water. Doing so could result in fire or
electric shock.
Do not put your face or hand near the exhaust vents.
Doing so could result in burns or an accident due to
hot air coming from the exhaust vents.
Do not use the machine on soft material such as paper
or cloth that might get sucked into the intake vents.
Doing so may cause heat buildup inside the machine,
resulting in malfunction, burns, or fire.
Do not place the machine in a location where air
flow is poor. Doing so may cause fire due to internal
■ Caution-
■ Caution-
■ Caution-
■ Caution-
■ Caution-
■ Caution-
5
English
English
Usage Notice
■ Caution-
■ Caution-
■ Caution-
■ Caution-
■ Caution-
■ Caution-
■ Caution-
■ Caution-
■ Caution-
■ Caution-
■ Caution-
■ Caution-
6
English
components becoming overheated.
Do not place or store the machine in a location where
direct sunlight or heat generation might occur. The
heat may deform or wear out the exterior parts or
negatively affect internal parts. Doing so could result
in fire.
Do not place low heat resistant material near the exhaust vents. Hot air may come from the exhaust vents,
resulting in damage to the machine or an accident.
Do not obstruct the machine’s vents. Doing so risks
fire caused by overheated internal components.
Push the power plug all the way into the power outlet.
Do not use a power outlet with a loose connection.
Doing so may result in heat buildup. Plug the power
cord in the correct direction into the base. If they are
not plugged in correctly, it could result in smoke, fire,
or electric shock.
If this machine is not going to be used for several days
or longer at a time, disconnect its power cord from the
wall outlet.
When disconnecting the power cord from the wall
outlet, always pull the plug, not the cord. Pulling the
cord can damage the power cord. Use of damaged
power cords could result in fire or electric shock.
Be sure to disconnect the plug from the wall outlet
and clean the prongs and the area around the prongs
at least once a year. Allowing dust to build up on the
plug constitutes a fire hazard.
When performing maintenance on the machine,
always disconnect the power cord from the wall
outlet.
Do not place the power cord and connection cable in
a way that might cause someone to trip and fall. The
machine might fall over and cause an injury.
The machine may be very hot after it is turned off,
especially the vents and the lower part of the unit
where the lamp is located. Avoid touching these areas.
Doing so may result in burns.
Do not place the machine on other equipment or vice
versa. Doing so may cause heat buildup inside the
machine or cause the other equipment to malfunction.
Do not increase the volume unless you are listening
while increasing the volume. Also, lower the volume
Usage Notice
■ Caution-
■ Caution-
■ Caution-
■ Caution-
■ Caution-
■ Caution-
before turning off the power, because a loud sound
may be emitted when the power is turned on and
cause hearing damage.
Do not tilt the machine horizontally more than ±20
degrees. Doing so may cause the entrance of foreign
objects in the housing of the machine which could
result in fire or electric shock.
If the machine’s interior is not cleaned regularly,
dust will accumulate. Fire and breakdown can result
from heavy accumulation of dust inside this machine.
Contact your sales or service representative for details
about and charges for cleaning the machine’s interior.
Unplug the power cord from the wall outlet before
you move the machine. While moving the machine,
take care that the power cord is not damaged under
the machine. Failing to take these precautions could
result in fire or electric shock.
Do not use attachments not recommended by RICOH.
Use of an incompatible attachments could cause
hazards or damage to the product.
Unplug this product from the wall outlet and take the
product to qualified service personnel if you encounter
any of the following conditions:
a) The power supply cord or plug is damaged.
b) Liquid has been spilled, or objects have fallen into
the product.
c) The product has been exposed to rain or water.
d) The product does not operate normally when following the operating instructions. Adjust only those
controls that are covered by the operating instructions.
e) The product has been dropped or damaged in any
way. (If the cabinet should break, please handle with
care to avoid injury.)
This product incorporates glass components, including
a lens and a lamp. If these should break, please handle
with care to avoid injury and contact your sales
representative for repair service. Avoid any broken
pieces of glass since they may cause injury. In the
unlikely event that the lamp ruptures, thoroughly
clean the area around the projector and discard any
edible items placed in that area since they may be
contaminated.
7
English
English
Usage Notice
■ Caution-
■ Caution-
■ Caution-
8
English
Do not place anything in front of the lens while the
projector is operating. Things placed in front of the
lens may overheat and burn or start a fire.
Unauthorized substitutions may result in fire, electric
shock, or other hazards. (Only the replacement of the
lamp should be made by users.)
Upon completion of any service or repairs to this
product, ask the service technician to perform
safety checks to verify that the product is in proper
operating condition.
Do not use the product in a closed installation
location. Do not place the product in a box or in any
other closed installation location. Otherwise it may
overheat, which could result in a risk of fire.
Usage Notice
ABOUT THE LAMP
■ Warning-
■ Warning-
■ Warning-
■ Caution-
■ Caution-
When the lamp reaches the end of its life, it will burn
out and may make a loud popping sound. If this
happens, the projector will not turn back on until the
lamp module has been replaced. To replace the lamp,
follow the procedures listed under “Replacing the
Lamp”.
Before replacing the lamp, turn off the power and
wait at least one hour to allow the machine to cool
completely. If it is not completely cool, you may burn
or injure yourself due to the inside of the machine and
lamp unit being hot. If you replace the lamp without
unplugging the power cord from the power outlet,
electric shock or explosion may occur.
Be careful when handling the used lamp so that it
does not break. If it breaks, it may cause injury.
This projector will detect the life of the lamp itself.
Be sure to change the lamp when it shows warning
messages.
The machine’s light uses a mercury vapor lamp that
becomes high pressure when it is turned on. The lamp
has the following characteristics, so be sure to handle
it with care after understanding the contents. If the
lamp explodes and you are either injured from broken
pieces of glass, think you have gotten glass particles
or mercury vapour in your eyes, or have inhaled
glass particles or mercury vapour, contact a doctor
immediately.
■Deterioration or shock can cause the lamp’s life span
to end or the lamp to explode. If the lamp explodes, it
may make a big noise.
■The time that it takes for the lamp to reach its life
span or explode depends on each individual lamp and
its operating conditions. It is possible that it might
explode the first time it is used.
■If you use the lamp past its replacement period, the
possibility of explosion increases.
■If the lamp explodes, broken glass pieces may be
scattered around the inside of the machine and ejected
from the vent or other opening.
9
English
English
Usage Notice
■If the lamp explodes, a very small amount of
mercury vapor in the lamp tube and broken glass
pieces may be ejected from the vents or other opening.
What to do if a lamp has exploded
.If the lamp explodes, remove the power cord from
the projector, leave the room while making sure it is
thoroughly ventilated.
.If the lamp explodes and you think that you have
gotten glass particles or mercury vapor in your eyes or
have inhaled either, contact a doctor immediately.
.Clean up the area around the projector completely
while being careful not to get injured from any broken
glass pieces.
.Throw away any food that was near the projector.
.Ask your service representative to replace the lamp
and inspect the projector.
10
English
Usage Notice
REMOTE CONTROL BATTERY
Warning
• Never throw batteries into a fire.
Using the batteries improperly may cause them to explode or leak
and may result in serious injury. If battery-leaking fluid contacts
skin, wash the fluid off immediately with clean water and consult a
doctor. If the fluid spills on an instrument, avoid contact and wipe
it off using tissue paper. Then dispose of the used tissue paper as
flammable garbage after moistening the tissue with water.
• Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the
product and keep it away from children. If you think batteries might
have been swallowed or placed inside any part of the body, seek
immediate medical attention.
Notes
• Be sure to use CR2025 size battery.
• Dispose of batteries in a designated disposal area.
• Attention should be drawn to the environmental aspects of battery
disposal.
• If the remote control does not operate correctly, or if the operating
range becomes reduced, replace the batteries.
• Avoid contact with water or liquid.
• Do not expose the remote control to moisture or heat.
• Do not drop the remote control.
• If the battery has leaked in the remote control, carefully wipe the
case clean and install new battery.
• Dispose of used batteries according to the instructions.
• The remote control may fail to operate if the infrared remote sensor
is exposed to bright sunlight or fluorescent lighting.
Important:
Contents of this manual are subject to change without prior notice.
In no event will the company be liable for direct, indirect, special,
incidental, or consequential damages as a result of handing or
operating this product.
11
English
English
Usage Notice
Safety Labels of This Machine
1 Do not block the air intake or exhaust. Doing so could cause a
fire due to internal overheating. Do not place your hands, face, or
otherobjects near the air exhaust, the lamp cover or the bottom of
theunit. Doing so could result in injury and/or damage the object.
2 Do not place anything in front of the lens while the projector is
operating. Things placed in front of the lens may overheat and burn
or start a fire. If you want to temporarily stop the projected image,
use the AV mute on the remote control or the keypad.
3 Do not look into the lens while the lamp is on. The strong light from
the lamp may cause damage to your eyesight.
4 To replace the lamp, unplug the power cord and then wait for 60
minutes.
5 Do not remove any screws except the lamp cover screws. Do not
block or cover the vents.
4/5
1
2
3
If you wish to discard this product, please contact
your local authorities, the shop where you bought
this product, your local dealer or sales/service
representatives.
12
English
Usage Notice
Regulation & Safety Notices
This appendix lists the general notices of your Projector.
Notice: Users in the United States of America
FCC notice
MODEL NAME: RICOH PJ X2340/S2340
TRADE NAME: PROJECTOR
MODEL NAME: RICOH PJ X2340/S2340
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
This device has been tested and found to comply with the
limits for a Class B digital device pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this device does cause
harmful interference to radio or television reception, which
can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
▀■ Reorient or relocate the receiving antenna.
▀■ Increase the separation between the device and
receiver.
▀■ Connect the device into an outlet on a circuit different
from that to which the receiver is connected.
▀■ Consult the dealer or an experienced radio/television
technician for help.
13
English
English
Usage Notice
RESPONSIBLE PARTY: Ricoh Americas Corporation
5 Dedrick Place, West Caldwell, NJ 07006
Phone: 973-882-2000
Notice: Shielded cables
All connections to other computing devices must be
made using shielded cables to maintain compliance
with FCC regulations.
Caution
Changes or modifications not expressly approved
by the manufacturer could void the user’s authority, which is granted by the Federal Communications
Commission, to operate this projector.
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY
AND MUST BE RECYCLED OR DISPOSED OF
ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.
Notes to Users in the State of California
Perchlorate Material - special handling may apply, See www.
dtsc.ca.gov/hazardouswaste/perchlorate.
WARNING: Handling the cord on this product will expose
you to lead, a chemical known to the State of California to
cause cancer, and birth defects or other reproductive harm.
Wash hands after handling.
Notes to Canadian Users
Remarques à l’attention des utilisateurs au
Canada
Contains mercury / Contient du mercure
For more information on safe handling
procedures, the measures to be taken
in case of accidental breakage and safe
disposal option visit:
www.ec.gc.ca/mercure-mercury
Dispose of or recycle in accordance with
applicable laws.
14
English
Pour plus d’ informations sur les
procédures de manutention sécuritaire,
les mesures à prendre en cas de bris
accidentel et option d’ élimination
sécuritaire visitez:
www.ec.gc.ca/mercure-mercury/default.
asp?lang=Fr&n=DB6D2996-1
Éliminez ou les recyclez conformément
aux lois applicables.
Usage Notice
Declaration of Conformity for EU countries
▀■ EMC Directive 2004/108/EC (including amendments)
▀■ Low Voltage Directive 2006/95/EC
Notice: Users in EU countries
CE Marking Traceability Information (For
EU Countries Only)
Manufacturer:
Ricoh Co., Ltd.
3-6 Nakamagome 1-chome, Ohta-ku, Tokyo. 143-8555,
Japan
Importer:
Ricoh Europe PLC
20 Triton Street, London. NW1 3BF, United Kingdom
User Information on Electrical and
Electronic Equipment
Users in the countries where this symbol shown in this section
has been specified in national law on collection and treatment
of E-waste.
Our Products contain high quality components and are designed to
facilitate recycling.
Our products or product packaging are marked with the symbol
below.
This product contains substances which are harmful to humans and
the environment.
15
English
English
Usage Notice
• The lamp contains mercury.
Please dispose of this product or used lamps in accordance with local
regulations.
The symbol indicates that the product must not be treated as municipal
waste. It must be disposed of separately via the appropriate return
and collection systems available. By following these instructions you
ensure that this product is treated correctly and help to reduce potential
impacts on the environment and human health, which could otherwise
result from inappropriate handling. Recycling of products helps to
conserve natural resources and protect the environment.
For more detailed information on collection and recycling systems for
this product, please contact the shop where you purchased it, your local
dealer or sales/service representatives.
Notice: Users in Turkey
All Other Users
If you wish to discard this product, please contact your local authorities,
the shop where you bought this product, your local dealer or sales/
service representatives.
16
English
Usage Notice
Notice: Users in the EU
Note for the Battery and/or Accumulator
Symbol
In accordance with the Battery Directive 2006/66/EC Article 20
Information for end-users Annex II, the above symbol is printed
on batteries and accumulators. This symbol means that in the
European Union, used batteries and accumulators should be
disposed of separately from your household waste. In the EU,
there are separate collection systems for not only used electrical
and electronic products but also batteries and accumulators.
Please dispose of them correctly at your local community waste
collection/recycling centre.
Notice: Users in Taiwan
⺊暣㰈婳⚆㓞
請勿將電池當作一般垃圾丟棄。這個標
誌表示電池不應視為一般垃圾丟棄。僅
適用於台灣。
17
English
English
Usage Notice
Other Information
Copyrights to Images
When projecting images using the projector, be careful
not to infringe the copyright of protected materials.
The following are examples that may infringe the
copyright of protected materials.
• Broadcasting images or movies for commercial purposes
• Modifying images or movies using functions such as freeze,
magnify, or zoom to broadcast images for commercial
purposes or public viewing
• Varying the aspect ratio of images or movies using a
function that changes the screen size to broadcast images for
commercial purposes or public viewing
Note to Users Viewing 3D Images
Pay attention to the following points when viewing images
using 3D glasses with projector:
• How 3D images are viewed may vary according to the
individual.
• Do not use 3D glasses for viewing any material other than
3D images.
• Before viewing 3D images, make sure to read the manuals
provided with your 3D glasses and 3D compatible content.
• Avoid viewing 3D images for a long period of time. Take a
break of 15 minutes or longer after every hour of viewing.
• If you feel sick while viewing 3D images, stop viewing them.
If you continue to feel sick, consult a doctor.
• When viewing 3D image in a room where on LED lighting
system or fluorescent lights are used, you may feel that the
light in the room flickers. If this is the case, dim the lights
until you do not notice any flickers, or turn off the lights.
• If you or any member of your family has a history of lightsensitive seizures, consult a doctor before viewing 3D
images.
18
English
Introduction
Product Features
Outstanding features include:
■ RICOH PJ S2340 (SVGA(800×600))/
RICOH PJ X2340 (XGA(1024×768))
■
Single chip DLP® technology
■NTSC3.58/NTSC4.43/PAL(B/D/G/H/I/M/N)/
■Multi-Auto functions: Auto detection, Auto image and
■ Full function remote control
■ User friendly multilingual on screen display
■Advanced digital keystone correction and high quality
■Built-in mono 2-Watt speaker.
■UXGA, WXGA, SXGA+, SXGA, XGA compression and
■ Macintosh compatible
SECAM (B/D/G/K/K1/L) and SDTV(480i/576i),
EDTV(480p/576p), HDTV(720p/1080i/1080p)
compatible
Auto saving the adjustments
full screen image re-scaling
VGA re-sizing
19
English
English
Introduction
Package Overview
This projector comes with all the items shown below. Check
to make sure your unit is complete. Contact your dealer
immediately if anything is missing.
Projector with lens cap
Remote Control (CR2025
Battery is contained)
VGA Cable
CD-ROM
Documentation:
Read This First

Warranty Card

20
English
Power Cord
Introduction
Product Overview
1
3
9
10
2
9
3
4
5
8
7
6
11
11
1.
2.
3.
4.
5.
6.
12
Control panel
Zoom lever
Ventilation (inlet)
Dust filter
Speaker
Focus ring
7. Lens cap
8. Lens
9. Ventilation (outlet)
10. Infrared remote sensor
11. Connection ports
12. Adjustable feet
21
English
English
Introduction
Connection Ports
1
2
3
4
5
6
8
N ot e
Monitor Out
terminal outputs the
signal which is inputted to Computer In
terminal when VGA
OUT (Standby) is set
to “off”.
22
English
1.HDMI terminal
2.COMPUTER IN/COMPONENT IN terminal
3. VIDEO IN terminal
4. PC CONTROL terminal
5. MONITOR OUT terminal
6.AUDIO IN Jack
7. AUDIO OUT Jack
8. AC IN socket
9. Kensington lock™
7
9
Introduction
Control Panel
3
1
2
4
5
6
7
1
Lamp indicator
Indicate the projector’s lamp status.
2
Temp indicator
Indicate the projector’s temperature
status.
3
Power indicator
Indicate the projector’s status.
4
Power
Refer to the “Power On/Off the
Projector” section. Please see pages
30~31.
5
Enter/Input
Confirm your section of items in sub
menu operation. When the OSD menu
appears, press “Input” to choose RGB,
Component, S-Video, HDMI, and
Composite sources.
6
Menu
Press “Menu” to launch the Onscreen
display (OSD), back to the top level of
OSD for the OSD main menu operation.
7
Four
Directional
Select Keys
Use or or or to select items or
make adjustments to your selection.
23
English
English
Introduction
Remote Control
6
1
7
2
8
9
10
11
3
4
12
5
13
24
English
1
Power Button
Turns the projector on/off.
2
Aspect Button
Select aspect ratio among Auto,
4:3,16:9, 16:10.
3
Menu Button
Turns the main menu on/off or
returns to upper level in the menu
operations.
4
Freeze Button
The screen will be freezed.
5
Eco Button
Displays Lamp Power mode menu.
6
Picture Button
Selects the color mode among
Dynamic, PC, Movie, Game and User.
7
Input Button
Displays source select menu.
Introduction
N ot e
When “AV
MUTE” is set to “On”,
the projector may turn
off automatically after
a certain time, depending on “Auto Power
Off (Min)” setting.
8
9
AV Mute
Button
Mutes audio and video.
Buttons
Uses to operate menu. Keystone can
be adjusted by pressing and
buttons when menu is not displayed.
10
Auto Set
Button
Automatically synchronize the
projector to the input source.
11
Enter Button
Confirm your section of items in
menu system.
12
Volume +/buttons
Adjust sound level.
13
Magnify +/buttons
Adjusts magnification ratio of the
displayed image.
25
English
English
Introduction
Remote Control Battery Installation
Press firmly and
slide the battery
cover off.
2
Remove the old battery and
install new one (CR2025).
Ensure that the side with a
“+” is facing up.
3
Put the cover back
LT
3V
S
20
LT
R
3V
O
C
M
25
O
C
R
S
20
25
1
To ensure safe operation, please observe the following precautions :
■ Never throw batteries into a fire.
■ Do not ingest battery, Chemical Burn Hazard.
■ Keep new and used batteries away from children.
For more detailed information, please see page 11.
26
English
Introduction
Remote Control Operating Range
S
LT
3V
S
20
LT
R
3V
O
C
M
25
O
C
R
20
25
■ When pointing the remote control directly toward the projector (Remote control signal
receiver), operating range for the remote control is within 7 m (23.0 ft). Also, operation
range available for four directions (up, down, left, right to the projector) is ± 15° and the
operation distance may become short.
■ If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate correctly.
■ You can operate the projector by reflecting the remote control signal on the screen. The
operating range may differ due to the loss of light caused by the properties of the screen.
■ When the remote control signal receiver is lit with a fluorescent light or other strong
light source, the projector may become inoperative. Set the projector as far from the
luminous source as possible.
■ You can operate all of the functions of the projector via the remote control. Make sure
not to lose the remote control.
■ Before using the remote control for the first time, remove the transparent insulation
sheet.
23.0’ (7m)
approx. 15°
䏳㵎
⛥₶
㮻ὲ
彺⅌
䡕宋
參⌼
杀㭉
凑⊏宥何
㕗䟨⎿䄍
柚憶
䩡䙤ⰶ
Transparent
insulation sheet
27
English
English
Basic Operations
Connecting the Projector
Connect to Computer/Notebook
N ot e
Make sure that the
power plug is fully
inserted into both the
projector AC inlet and
the wall outlet.
4
2
3
The AC outlet must
be near this equipment
and must be easily accessible.
N ot e
Due to the difference in applications
for each country, some
regions may have different accessories.
N ot e
Monitor Out
terminal outputs the
signal which is inputted to Computer In
terminal when VGA
OUT (Standby) is set
to “Off”.
E62405SP
R
6
1
5
Audio Output
Monitor Output
1............................................................................................Power Cord (supplied)
2............................................................................................................. HDMI Cable
3............................................................................................. VGA Cable (supplied)
4......................................................................................................... Audio In Cable
5...................................................................................................... Audio Out Cable
6.................................................................................................... Monitor Out cable

T
o ensure the projector works well with your computer,
please make sure the timing of the display mode is
compatible with your projector. Please see pages 58~60.

U
se the cables that come with the projector.
28
English
Basic Operations
N ot e
Make sure that the
power plug is fully
inserted into both the
projector AC inlet and
the wall outlet.
The AC outlet must
be near this equipment
and must be easily accessible.
Connect to Video
DVD player, Set-top Box
HDTV receiver
Video Output
5
3
2
7
E62405SP
4
R
6
N ot e
Due to the difference in applications
for each country, some
regions may have different accessories.
1
Audio Output
1............................................................................................Power Cord (supplied)
2...........................................................................................Component-RGB Cable
3........................................................................................3 RCA Component Cable
4............................................................................................Composite Video cable
5......................................................................................................... Audio In Cable
6...................................................................................................... Audio Out Cable
7...............................................................................................................HDMI cable

T
o ensure the projector works well with your computer,
please make sure the timing of the display mode is
compatible with your projector.
29
English
English
Basic Operations
Powering On/Off the Projector
Powering On the Projector
1. Ensure that the power cord and signal cable are securely
connected. The Power indicator will turn red.
2.Remove the lens cap. 
3.Turn on the lamp by pressing “Power” on the control panel
or the remote control.  The Power indicator will flash blue.
The startup screen will display in approximately 5 seconds.
After the screen disappears, the Power indicator will turn
blue.
The first time you use the projector after purchase, the language menu is displayed after the startup screen.
Please see page 46.
4.Turn on your source (computer, notebook, video player,
etc.) The projector will detect your source automatically.
CAUTION:
N ot e
• Do not look into the lens while the lamp is on. The strong light from the lamp may
cause damage to your eyesight.
• Do not block the air intake or exhaust. Doing so could cause a fire due to internal
overheating.
• Do not place your hands, face, or other objects near the air exhaust, the lamp cover
or the bottom of the unit. Doing so could result in injury and/or damage the object.
• Do not block the light from projection lens by anything when you want to stop
projection. Doing so could cause a fire due to heating by strong light. Please use
“AV Mute” function for this purpose.
If you connect
multiple sources at
the same time, use the
“Input” on the remote
control.
2
OR
N ot e
Turn on the projector
first and then the signal
sources.
Lens Cap
1
30
English
Power
Basic Operations
Powering Off the Projector
1. Press the “Power” to turn off the projector lamp, you will
see a message as below on the on-screen display.
Power Off?
Press power key again.
2.Press the “Power” again to confirm.
3.The cooling fan continues to operate for about 60 seconds for
cooling cycle and the Power indicator will flash red. When
the light stop flashing, the projector has entered standby
mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and has
entered standby mode. Once in standby mode, simply press
“Power” to restart the projector.
4.Disconnect the power cord from the electrical outlet and the
projector.
31
English
English
Basic Operations
Warning Indicator
When the “Temp” indicator lights red, it indicates the projector has overheated. The projector will automatically shut
itself down.
Please:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temprature is under 40 degrees C.
When the “Lamp” indicator lights red, and you see the message below displays on-screen, the projector has detected
that the lamp is approaching its end of life. Please change
the lamp as soon as possible or contact your local dealer or
our service center.
Lamp is approaching the end of its useful life
Replacement Suggested!
When the “Temp” indicator flashes red (0.5 sec on, 0.5 secs
off) and the message below displays on-screen, it indicates
the fan failed. Stop using the projector and disconnect the
power cord from the electrical outlet, then contact your local
dealer or our service center.
The projector will switch off automatically.
32
English
Basic Operations
Adjusting the Projected Image
Adjusting the Height of Projector Image
The projector is equipped with adjustable feet to raise and lower
the image to fill the screen.
To raise/lower the image:
1.Use  to fine-tune the display angle.
N ot e
You can raise the
projector front up to 6
degrees by rotating the
adjustable feet.
Front Adjustable feet
Maximum Length:15mm
1
33
English
English
Basic Operations
Adjusting the Projector Zoom and Focus
You may turn the zoom lever to zoom in or out. To focus the
image, rotate the focus ring until the image is clear.
The projector will focus at distances from 3.9 to 43.0 feet (1.2
to 13.1 meters).
Zoom Lever
Focus Ring
Adjusting Projection Image Size
Height
Projection Image Size from 30” to 300” (0.7 to 7.6 meters).
Dia
go
na
l
Width
Screen
Side View
Offset (Hd)
Projection Distance (D)
34
English
Screen (H)
Basic Operations
RICOH PJ X2340/S2340
Diagonal length
(inch) size of
4:3 Screen
Screen Size W x H
(m)
Projection Distance (D)
(inch)
(m)
Offset (Hd)
(feet)
Width
Height
Width
Height
wide
tele
wide
tele
(m)
(feet)
30
0.61
0.46
24
18
1.2
1.3
3.9
4.3
0.07
0.22
40
0.81
0.61
32
24
1.6
1.8
5.2
5.7
0.09
0.30
50
1.02
0.76
40
30
2.0
2.2
6.4
7.2
0.11
0.37
60
1.22
0.91
48
36
2.4
2.6
7.7
8.6
0.14
045
70
1.42
1.07
56
42
2.8
3.1
9.0
10.0
0.16
0.52
80
1.63
1.22
64
48
3.1
3.5
10.3
11.5
0.18
0.60
90
1.83
1.37
72
54
3.5
3.9
11.6
12.9
0.21
0.67
100
2.03
1.52
80
60
3.9
4.4
12.9
14.3
0.23.
0.75
110
2.24
1.68
88
66
4.3
4.8
14.2
15.8
0.25
0.82
120
2.44
1.83
96
72
4.7
5.2
15.4
17.2
0.27
0.90
130
2.64
1.98
104
78.
5.1
5.7
16.7
18.9
0.30
0.97
140
2.84
2.13
112
84
5.5
6.1
18.0
20.1
0.32
1.05
150
3.05
2.29
120
90
5.9
6.6
19.3
21.5
0.34
1.12
160
3.25
2.44
128
96
6.3
7.0
20.6
22.9
0.37
1.20
170
3.45
2.59
136
102
6.7
7.4
21.9
24.4
0.39
1.27
180
3.66
2.74
144
108
7.1
7.9
23.2
25.8
0.41
1.35
190
3.86
2.90
152
114
7.5
8.3
24.5
27.2
0.43
1.42
200
4.06
3.05
160
120
7.8
8.7
25.7
28.7
0.46
1.50
210
4.27
3.20
168
126
8.2
9.2
27.0
30.1
0.48
1.57
220
4.47
3.35
176
132
8.6
9.6
28.3
31.5
0.50
1.65
230
4.67
3.51
184
138
9.0
10.1
29.6
33.0
0.53
1.72
240
4.88
3.66
192
144
9.4
10.5
30.9
34.4
0.55
1.80
250
5.08
3.81
200
150
9.8
10.9
32.2
35.8
0.57
1.87
260
5.28
3.96
208
156
10.2
11.4
33.5
37.3
0.59
1.95
270
5.49
4.11
216
162
10.6
11.8
34.7
38.7
0.62
2.02
280
5.69
4.27
224
168
11.0
12.2
36.0
40.1
0.64
2.10
290
5.89
4.42
232
174
11.4
12.7
37.3
41.6
0.66
2.17
300
6.10
4.57
240
180
11.8
13.1
38.6
43.0
0.69
2.25
35
English
English
User Settings
On Screen Display (OSD)
The Projector has a multilingual On Screen Display that allows
you to make image adjustments and change a variety of settings. The projector will automatically detect the source.
How to operate
1.To open the OSD, press “Menu” on the Remote Control or the keypad.
2.When OSD is displayed, use
keys to select any item in the
main menu. While making a selection on a particular, press
key
to enter sub menu.
3.Use
keys to select the desired item in the sub menu and
press “Enter” to adjust the settings by
or
key. To exit
from adjusting the item, press “Enter” again.
4. If
is shown in the setting, you can press
or “Enter” to enter
another sub menu. Press “Menu” to close the sub menu after adjustment.
5.After adjusting the settings, press “Menu” to go back to the main
menu.
N ot e
6.To exit, press “Menu” again. The OSD will be closed and the projector will automatically save the new settings.
If no button operation
is made for 10 seconds,
the OSD will be closed
automatically.
Sub Menu
Options
Auto Source
On
Input
Setting Value or
Adjusting Valur
Auto Power Off (Min)
Main Menu
Lamp Settings
Off
High Altitude
Dust Filter Reminder
Information
Select
36
English
Enter
Exit
User Settings
Menu Tree
Main Menu
2nd Level
3rd Level
4th Level
Default Value
Range
Dynamic
PC
Color Mode
Movie
Game
Depends on the signal type and
on changes to Color Mode amd
User Mode settings.
User
White
Light Yellow
Wall Color
Light Blue
White
Pink
Dark Green
Picture
Brightness
Depends on Color Mode.
0 ~ 100
Contrast
Depends on Color Mode.
0 ~ 100
Sharpness
Depends on Color Mode.
0 ~ 31
Saturation
Depends on Color Mode.
0 ~ 100
Hue
Depends on Color Mode.
0 ~ 100
Gamma
Depends on Color Mode.
0~3
Low
Color Temp
Mid
Depends on Color Mode.
High
Auto
RGB Input Range
Standard
Auto
Full
37
English
English
User Settings
Main Menu
2nd Level
3rd Level
4th Level
Default Value
Range
Auto
Aspect Ratio
4:3
16:9
Auto
16:10
Phase
Depends on Input Signal.
0 ~ 31
Clock
Depends on Input Signal.
‘-5~+5
H.Position
Depends on Input Signal.
Depends on
Input Signal
(usually, min =
-30, max = 30).
V.Position
Depends on Input Signal.
Depends on
Input Signal (for
example, -5~5).
Digtial Zoom
0
0 ~ 10
V Keystone
0
-40~+40
Position
Front
Ceiling Mount
Front Ceiling
Rear
Rear Ceiling
38
English
Front
User Settings
Main Menu
2nd Level
3rd Level
4th Level
Default Value
Range
English
German
French
Italian
Spanish
Polish
Swedish
Dutch
Portugese
Language
Traditional
Chinese
English
Simplified
Chinese
Korean
Russian
Setting
Arabic
Norwegian
Turkish
Thailand
Czech
Hungarian
Kazakh
VGA OUT
(Standby)
Security
Off
Off
On
Security
Off
On
Change Password
Reset
Audio
Mute
Volume
Yes
No
On
Off
No
Off
20
0 ~ 32
39
English
English
User Settings
Main Menu
2nd Level
Auto Source
3rd Level
4th Level
On
Default Value
Range
On
Off
HDMI
Input
Computer
Search all source
Video
Auto Power
Off(Min)
Options
Lamp Settings
20
0~120
Lamp Hours
Used (Normal)
0
infinite
Lamp Hours
Used (ECO)
0
infinite
Lamp Life
Reminder
Off
On
On
Normal
Lamp Power
Mode
Auto
Normal
ECO
Clear Lamp
Hours
High Altitude
Dust Filter
Reminder
Yes
No
On
Off
Off
Filters
Remind(Hour)
Cleaning up
reminder
Yes
No
No
Model Name
Source
Options
Information
Resolution
Software Version
Color Space
Aspect Ration
Off
3D
On
Auto
Auto
3D
3D Invert
On
Off
Side-by-Side
(Half)
3D Format
Top and Bottom
Frame Sequential
40
English
Off
User Settings
Picture
Color Mode
White
Wall Color
Brightness
Contrast
Sharpness
Saturation
Hue
Picture
Gamma
Color Temp
Low
RGB Input Range
Auto
Select
Enter
Exit
Color Mode
There are factory presets optimized for various types of images.
Dynamic: For bright room.
PC: For computer or notebook.
Movie: For home theater.
Game: For games.
User: Color mode user adjusted.
Wall Color
Select an appropriate color for wall projection.
White: For white color.
Light Yellow: For light yellow color.
Light Blue: For light blue color.
Pink: For pink color.
Dark Green: For dark green color.
Brightness
Adjust the brightness of the image.
Press the
Press the
value 0).
to increase the brightness of the screen (up to 100).
to reduce the brightness of the screen (minimum
41
English
English
User Settings
Contrast
Adjust the contrast.
Press the
Press the
value 0).
N ot e
to increase the contrast of the screen (up to 100).
to decrease the contrast of the screen (minimum
Sharpness
Adjust the sharpness of the projected image.
“Sharpness”and
“Saturation” can be adjusted only when Video
is selected.
Press the
Press the
value 0).
to make contours to become sharper (up to 31).
to make the contours to become softer (minimum
Saturation
Adjust a video image from black and white to saturated color.
Press the
Press the
N ot e
value 0).
to increase the intensity of the color (up to 100).
to decrease the intensity of the color (minimum
Hue
“Hue” can be adjusted only when Video is selected and the color mode is NTSC or NTSC
4:43.
Adjust the skin tone.
Press the
Press the
0).
to adjust the color to be greenish (up to 100).
to adjust the color to be reddish (minimum value
Gamma
Adjust the gamma table when the dark areas or bright areas of the
image is not clear.
Press the
Press the
+3).
to emphasize detail in dark areas of image (up to
to emphasize detail in bright areas of image (minimum value 0).
Color Temp
Select the color temperature.
Low: The screen image looks warmer.
Mid: The medium color temperature.
High: The screen image looks colder.
42
English
User Settings
N ot e
RGB Input Range
Set the RGB Input Range.
”RGB Input Range”
can be adjusted only
when HDMI is se
lected”.
Auto: Set the RGB input range automatically.
Standard: Use to make the black color on the image become
lighten.
Full: Use when the dark area on the image is too dark.
43
English
English
User Settings
Position
Auto
Aspect Ratio
Phase
Clock
H. Position
V. Position
Digital Zoom
V. Keystone
Select
Position
Font
Ceiling Mount
Exit
Enter
Aspect Ratio
Use this function to choose your desired aspect ratio.
Auto: The projector displays the image by automatically
switching the screen sizes between 4:3 and 16:9.
4:3: Input signal is displayed to full screen. This mode is for 4:3
16:9: Input signal is displayed with 16:9 aspect in the center of
16:10: This format is for 16:10 input sources, like wide screen
aspect images.
the screen. This mode is for 16:9 aspect signals.
laptop.
Phase
Adjust to achieve an optimal image when there is a flickering image.
Clock
Adjust to achieve an optimal image when there is a vertical flickering in the image.
H. Position (Horizontal Position)
Shift the projected image position horizontally.
V. Position (Vertical Position)
Shift the projected image position vertically.
44
English
User Settings
N ot e
When the Digital
Zoom is in the enlarge
status, exits the menu
screen and the Zoom
picture will display at
the bottom left of the
screen.
Digital Zoom
Adjust the magnification of the image. Magnification can be set
from 1.0x to 2.0x in 0.1 increments.
V. Keystone
This function is used to adjust keystone distortion of the projected
image.
Ceiling Mount
This function is used to project the image from a ceiling-mounted
projector.
Front: When setting on a desk/floor and projected from front
Front Ceiling: When mounting on the ceiling and projected
Rear: When setting on a desk/floor and projected from back
Rear Ceiling: When mounting on the ceiling and projected from
side of the screen.
from front side of the screen.
side of the screen. (Using translucent screen).
back side of the screen. (Using translucentscreen).
45
English
English
User Settings
Setting
Language
English
VGA Out (Standby)
Off
Security
Reset
Setting
Select
Enter
Exit
Language
The language used in the On-Screen Menu is available in English,
German, Spanish, French, Italian, Dutch, Portuguese, Simplified
Chinese, Polish, Korean, Russian, Swedish, Traditional Chinese,
Arabic, Norwegian, Turkish, Thai, Czech, Hungarian and Kazakh.
VGA Out (Standby)
When in standby mode, choose whether to output the signal from
“Computer 1 In” to “Monitor Out” terminal.
On: Output image signal from “Monitor Out” terminal when
the projector is in standby mode.
Off: Image signal from “Monitor Out” terminal can not be
output when the projector is in standby mode.
Security
Configure the security settings.
Security
Security
On
Change Password
Select
Exit
Enter
Security: Select “On” to use the security verification when the
turning on the projector. Select “Off” to be able to switch on the
projector without a password verification.
Security
46
English
On
Off
User Settings
When you enable the security function for the first time, you
need to enter the default password:
1. The default password : pqtupq
2. Use the remote control to enter your password.
Security
Enter Security Code (6 Digits)
Exit
N ot e
The default password
is “pqtupq“.
Change Password: Change the password.
To change the password, do the following:
1. Press “Enter” to enter the Change Password submenu.
2. Enter the current password.
Security
Enter Security Code (6 Digits)
Exit
3. Use the remote control to enter your old password.
4. Use the direction keys on the remote control to enter your
new password.
5. Enter the new password again.
If you have forgotten your password, please contact your local
office for support.
Reset
Return all data to the factory defaults.
Press the or to select “Reset” function.
Press the , “Input Enter” or “Enter” to display the setting
dialog box.
Press the or to select “Yes”.
Press the , “Input Enter” or “Enter” to execute.
47
English
English
User Settings
Audio
Off
Mute
Volume
Audio
Select
Enter
Exit
Mute
Temporarily turn off the sound.
On: Mute audio.
Off: Output audio.
Volume
Adjust the volume.
Press the
Press the
48
English
to turn up the volume (up to 32)
to turn down the volume (minimum value 0).
User Settings
Options
Auto Source
On
Input
Auto Power Off (Min)
Lamp Settings
Off
High Altitude
Information
Options
Select
Enter
Exit
Auto Source
Set the automatic signal search function when power on or the
source of the signal being received is lost.
On: It will automatically search and display the signal sources
marked in the “Options” > “Input” when power on or the
source of the signal being received is lost.
Off: When the source of the signal being received is lost, it will
not search other sources.
Input
Set the automatic search signal source for “Auto Source”.
Press the or to select “Input”.
Press the , “Input Enter” or “Enter” to display the setting
dialog box.
- The Input menu dialog box is displayed as follows:
Input
HDMI
N ot e
Computer
Video
The input with the
check mark will be able
to be searcjed when
“Auto Source” is set to
“On”.
To remove the check
mark, choose the
desired item and press
, “Input/Enter” or
“Enter”.
Select
Press the
press the
or
Enter
Exit
to select the input you want to search and
.
49
English
English
User Settings
N ot e
Auto Power Off (Min)
When “AV MUTE”
is set to “On”, the
projector may turn off
automatically after
certain time, depending
on “Auto Power Off
(Min)” setting.
60 seconds before
the auto power off, the
countdown screen will
appear. The countdown
screen will disappear
if there is signal input
or operation to the
projector.
Set the time to automatically turn off the projector when there is
no signal input.
Lamp Settings
Displays and sets detail of the lamp settings.
Lamp Hours Used (Normal): Displays the used lamp hours
under “Normal” lamp power mode.
Lamp Hours Used (ECO): Displays the used lamp hours (in
real time) under “Normal”, “Auto”, ”ECO” lamp power mode.
The time is displayed as the sum of the time under each setting
of “Normal, “Auto”, “ECO” lamp power mode.
Lamp Life Reminder
- On: Displays the lamp warning message.
- Off: The warning lamp message will not be displayed.
Lamp Power Mode
N ot e
If “Lamp Life Reminder” is set to “Off”,
the lamp warming
message will not be
displayed when the
lamp used time reaches
the end of lamp life. In
this case, please check
the lamp life with the value at the “Lamp
Hours Used (Normal)”
and “Lamp Hours Used
(ECO)”.
Select desired lamp power mode under different situations.
- Auto: The brightness level of the content is automatically
detected to significantly reduced lamp power.
consumption during periods of inactivity.
- ECO: Lowest brightness reduces the lamp power
consumption and extends the lamp life.
Clear Lamp Hours
Reset the lamp usage time after replacing the lamp unit.
High Altitude
Set to “On” when the projector is used at elevation between approximately 1 000 m (3 300 ft) and approximately 3 000 m (10 000
ft).
On: For the elevation between approximately 1 000 m (3 300 ft)
and approximately 3 000 m (10 000 ft).
Off: For the elevation below approximately 1 000 m (3 300 ft).
Information
Displays the input signal source and setting state information of
the projector. Displays “Source”, “Resolution”, “Software Version”, “Color Space” and “Aspect Ratio”.
50
English
User Settings
3D
Off
Off
3D Invert
3D Format
3D
Select
Exit
Enter
3D
Use this funciton to set the display mode of the 3D image.
On: Compulsory displays the 3D format which is selected in
“3D Format”.
Off: Turn off “3D” image display.
3D Invert
Flips the timing of the switch between the left and right of an image to display. Change the setting if the 3D images you see appear
not as expected.
On: Select when left and right 3D images are swapped to be
displayed.
Off: If the 3D images are displayed correctly, do not change the
“Off” settings.
3D Format
When “3D” is set to “On”, it will compulsorily display the 3D setting mode.
Side-by-Side: Displays the Side-by-Side 3D image in spite of
the input signal format.
Top and Bottom: Displays the Top and Bottom 3D image in
spite of the input signal format.
Frame Sequential: Displays the Frame Sequential 3D image in
spite of the input signal format.
51
English
English
Troubleshooting
Troubleshooting
If you experience trouble with the projector, refer to the following information. If the problem persists, please contact
your local dealer or service center.
Problem: No image appears on screen
Ensure all the cables and power connections are correctly and
securely connected as described in the “Installation” section.
Ensure the pins of terminals are not crooked or broken.
Check if the projection lamp has been securely installed. Please
refer to the “Replacing the lamp” section.
Make sure you have removed the lens cap and the projector is
switched on.
Ensure that the “AV Mute” feature is not turned on.
Problem: Partial, scrolling or incorrectly displayed image
Press “Auto Set” on the remote control.
 If you are using a Notebook:
1.First, follow the steps above to adjust resolution of the computer.
2. Press the toggle output settings. example: [Fn]+[F3]
PANASONIC, NEC => Fn+F3
HP, SHARP, TOSHIBA => Fn+F5
IBM, SONY => Fn+F7
DELL, EPSON => Fn+F8
FUJITSU => Fn+F10
APPLE =>F7
If you experience difficulty changing resolutions or your monitor
freezes, restart all equipment including the projector.
52
English
Troubleshooting
Problem: The screen of the Notebook or PowerBook computer is not displaying a presentation
 If you are using a Notebook PC:
Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each has a different way to be
reactivated. Refer to your computer’s documentation for detailed
information.
Problem: Image is unstable or flickering
Adjust the “Phase” or “Clock” to correct it. Refer to the “Image
Adjustment| Position” section for more information.
Change the monitor setting from your computer.
Check and reconfigure the display mode of your graphic card to
make it compatible with the product.
Problem: Image is out of focus
 Adjust the Focus Ring on the projector lens.
Make sure the projection screen is between the required distance.
Please see pages 34~35.
Problem: The image is stretched when displaying 16:9 DVD
Change “Aspect” by pressing the key on remote control or OSD
menu to show image with proper aspect ratio.
Problem: Image is too small or too large
Adjust the Zoom lever on the top of the projector.
Move the projector closer to or further from the screen.
Press “Aspect” button on the remote control or press “Menu” button on the projector panel, go to “Position --> Aspect Ratio” and
try the different settings.
53
English
English
Troubleshooting
Problem: Image is reversed
Select “Default Settings 1-->Projection Mode” from the OSD and
adjust the projection direction.
Problem: Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will
not turn on until the lamp module has been replaced. To replace
the lamp, follow the procedures in the “Replacing the Lamp”.
54
English
Troubleshooting
Problem: Indicator lighting message
Message
POWER
indicator
TEMP
indicator
LAMP
indicator
(Red/Blue)
(Red)
(Red)
Standby (Input power cord)
(Red)
Normal (Power on)
(Blue)
Powering up (Warming up)
Flashing Blue (0.5 sec)
Power off (Cooling Down)
Flashing Red (0.5 sec)
Error (Over temp. On Event)
(Blue)
Error (Over temp. On Standby)
(Red)
Error (Lamp failed On Event)
(Blue)
Error (Lamp failed On Standby)
(Red)
Error (Fan failed On Event)
(Blue)
Flashing
Error (Fan failed On Standby)
(Red)
Flashing
Error (Color Wheel fail / Striking
Lamp Fail On Event)
(Blue)
Flashing
Error (Color Wheel fail / Striking
Lamp Fail On Standby)
(Red)
Flashing
N ot e
Steady light =>
No light =>
55
English
English
Troubleshooting
Problem: Message Reminders
Over temperature - the projector has exceeded its recommended
operating temperature and must be allowed to cool down before it
may be used.
Please:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temprature is under 40 degrees C.
Replacing the lamp - the lamp is about to reach its maximum lifetime. Prepare to replace it soon.
Lamp is approaching the end of its useful life
Replacement Suggested!
 Fan failed - the system fan is not working.
The projector will switch off automatically.
56
English
Replacing the lamp
Replacing the lamp
The projector will detect the lamp life itself. It will show you a
warning message
Lamp is approaching the end of its useful life
Replacement Suggested!
Warning: To avoid
burns, allow the
projector to cool for
at least 60 minutes
before you replace the
lamp!
When you see this message, change the lamp as soon as
possible. Make sure the projector has been cooled down for at
least 60 minutes before changing the lamp.
1
2
3
Warning: To avoid the
risk of personal injury,
do not drop the lamp
module or touch the
glass parts. The glass
parts may shatter and cause injury if it is
dropped.
4
Lamp Replacing Procedure:
1.Switch off the power to the projector by pressing the
“Power”.
2. Allow the projector to cool down at least 60 minutes.
3. Disconnect the power cord.
Warning: For
4. Use a screwdriver to remove the 2 screws from the cover. 
continued safety
5. Push up and remove the lamp cover.
replace with
PJ Replacement Lamp 6.Loosen the 2 screws from the lamp module  and pull up the lamp bar. 
Type 26.
7. Pull out the lamp module by force. 
Caution: If the lamp
8. Install the new lamp module by reversing the previous steps.
should break, handle
See the lamp’s manual for instructions on resetting the lamp
with care to avoid
time.
injury due to broken
pieces and contact your Used Lamps
sales representative for
This projector’s lamp contains trace amounts of environmentally
repair service.
harmful inorganic mercury. Be careful not to break used lamps,
and dispose of them in accordance with local regulations or
contact your sales representative.
57
English
English
Appendices
List of Compatible Signals
A. VGA Analog
(1) VGA Analog - PC Signal
Modes
Resolution
V.Frequency
(Hz)
H.Frequency
(kHz)
Clock (MHz)
VGA
640 x 480
60
31.47
25.18
640 x 480
72
37.86
31.50
640 x 480
75
37.50
31.50
640 x 480
85
43.27
36.00
800 x 600
56
35.20
36.00
800 x 600
60
37.88
40.00
800 x 600
72
48.08
50.00
800 x 600
75
46.88
49.50
800 x 600
85
53.67
56.25
800 x 600
119.85
77.20
-
1024 x 768
60
48.36
65.00
1024 x 768
70
56.48
75.00
1024 x 768
75
60.02
78.75
1024 x 768
85
68.67
94.50
1024 x 768
119.804
98.80
-
1152 x 864
70
63.80
94.50
1152 x 864
75
67.50
108.00
1152 x 864
85
77.10
121.50
1280 x 1024
60
63.98
108.00
1280 x 1024
72
77.90
134.60
1280 x 1024
75
79.98
135.00
1280 x 1024
85
91.15
157.50
1280 x 960
60
60.00
108.00
1280 x 960
75
75.00
126.00
SXGA+
1400 x 1050
60
65.32
121.75
UXGA
1600 x 1200
60
75.00
162.00
PowerBook G4
640 x 480
60
31.50
25.17
PowerBook G4
640 x 480
66.6(67)
35.00
30.24
PowerBook G4
800 x 600
60
37.88
40.00
PowerBook G4
1024 x 768
60
48.36
65.00
PowerBook G4
1152 x 870
75
68.68
100.00
PowerBook G4
1280 x 960
75
75.20
126.00
i Mac (G3)
1024 x 768
75
60.30
80.00
SVGA
XGA
SXGA
QuadVGA
58
English
Appendices
A. VGA Analog
(2) VGA Analog - Extended Wide
Modes
Resolution
V.Frequency
(Hz)
H.Frequency
(kHz)
WXGA
1280 x 768
60
47.78
79.50
1280 x 768
75
60.29
102.25
1280 x 768
85
68.63
117.50
1280 x 720
60
44.80
74.25
1280 x 800
60
49.60
83.50
1440 x 900
60
55.90
106.50
1680 x 1050
60
65.30
146.25
1366 x 768
60
47.74
85.50
1920 x 1080-RB
60
66.60
138.50
1024 x 600
60
37.30
50.40
Clock (MHz)
(3) VGA Analog - Component Signal
480i
720 x 480
59.94 (29.97)
27.00
-
480p
720 x 480
59.94
31.47
-
576i
720 x 576
50 (25)
27.00
-
576p
720 x 576
50
31.25
-
720p
1280 x 720
60
45.00
-
720p
1280 x 720
50
37.50
-
1080i
1920 x 1080
60 (30)
33.75
-
1080i
1920 x 1080
50 (25)
33.75
-
1080p
1920 x 1080
60
67.50
-
1080p
1920 x1080
50
56.25
-
B. HDMI Digital
(1) HDMI - PC Signal (Same as DVI)
Modes
Resolution
V.Frequency
(Hz)
H.Frequency
(kHz)
Clock (MHz)
VGA
640 x 480
60
31.47
25.18
640 x 480
72
37.86
31.50
640 x 480
75
37.50
31.50
640 x 480
85
43.27
36.00
800 x 600
56
35.20
36.00
800 x 600
60
37.88
40.00
800 x 600
72
48.08
50.00
800 x 600
75
46.88
49.50
800 x 600
85
53.67
56.25
800 x 600
119.85
77.20
-
1024 x 768
60
48.36
65.00
1024 x 768
70
56.48
75.00
1024 x 768
75
60.02
78.75
1024 x 768
119.804
98.80
-
SVGA
XGA
59
English
English
Appendices
B. HDMI Digital
(1) HDMI -PC Signal (Same as DVI)
SXGA
1152 x 864
75
67.50
108.00
1152 x 864
85
77.10
121.50
1280 x 1024
60
63.98
108.00
1280 x 1024
72
77.90
134.60
1280 x 1024
75
79.98
135.00
1280 x 1024
85
91.15
157.50
QuadVGA
1280 x 960
75
75.00
126.00
PowerBook G4
640 x 480
60
31.50
25.17
PowerBook G4
640 x 480
66.6(67)
35.00
30.24
PowerBook G4
800 x 600
60
37.88
40.00
PowerBook G4
1024 x 768
60
48.36
65.00
PowerBook G4
1152 x 870
75
68.68
100.00
PowerBook G4
1280 x 960
75
75.20
126.00
i Mac (G3)
1024 x 768
75
60.30
80.00
Clock (MHz)
B. HDMI Digital
(2) HDMI Analog - Extended Wide
Modes
Resolution
V.Frequency
(Hz)
H.Frequency
(kHz)
WXGA
1280 x 768
60
47.78
79.50
1280 x 768
75
60.29
102.25
1280 x 768
85
68.63
117.50
1280 x 720
60
44.80
74.25
1280 x 800
60
49.60
83.50
1440 x 900
60
55.90
106.50
1680 x 1050
60
65.30
146.25
1366 x 768
60
47.74
85.50
1920 x 1080-RB
60
66.60
138.50
1920 x 1080-EIA
60
66.60
148.50
1024 x 600
60
37.30
50.40
59.94 (29.97)
27.00
-
(3) HDMI Analog - Video Signal
60
English
480i
720 x 480
(1440 x 480)
480p
720 x 480
59.94
31.47
-
576i
720 x 576
(1440 x 576)
50 (25)
27.00
-
576p
720 x 576
50
31.25
-
720p
1280 x 720
60
45.00
-
720p
1280 x 720
50
37.50
-
1080i
1920 x 1080
60 (30)
33.75
-
1080i
1920 x 1080
50 (25)
33.75
-
1080p
1920 x 1080
60
67.50
-
1080p
1920 x 1080
50
56.25
-
1080p
1920 x1080
24/23.98
27.00
-
Appendices
Configurations of Terminals
Terminal : Analog RGB (Mini D-sub 15 pin)
5
4
10
15
3
9
14
2
8
13
1
7
12
6
11
1
Red (R/Cr) Input/R Output
9
DDC 5V / NC
2
Green (G/Y) Input/G Output
10
Ground (Ver. sync.)
3
Blue (B/Cb) Input/B Output
11
ICP download
4
ICP download / NC
12
DDC Data / NC
5
Ground (Horiz.sync.)
6
Ground (Red)
13
Horiz. sync. Input / Output (Composite H/V
sync. Input)
7
Ground (Green)
14
Vert. sync. Input / Output
8
Ground (Blue)
15
DDC CLK / NC
61
English
English
Appendices
Specifications
■ List of general specifications
Item
Specification
Consumption Power
225W (ECO mode) / 280W (Full mode)
Weight
5.2 lbs (2.4 Kg)
Dimensions (WxHxD)
286x100x208 mm (include protruding parts)
Environmental Considerations
Operational Temperatures : 41° to 95°F (5° to 35°C),
20% to 80% humidity (non-condensing)
Storage Temperatures : -4° to 140°F (-20° to 60°C),
20% to 80% humidity (non-condensing)
Projection System
Single DLP® 0.55” chip
Resolution
RICOH PJ S2340: 800 × 600 pixels (SVGA)
RICOH PJ X2340: 1024 × 768 pixels (XGA)
Lens
F# 2.41 ~ 2.55, f=21.79 ~ 23.99 mm, 1.1X Zoom Lens
Lamp
High-pressure mercury lamp (190W)
Lamp Life
4500H(Normal)/6000H(Eco)
Projection screen size
30 ~ 300 inch
Projection distance
1.2 ~ 13.1m (Focus range)
Speaker
2W (Mono)
Connection terminal
Computer In terminal
Mini D sub 15 pin RGB / Y/PB / PR (dual use)
Monitor Out terminal
Mini D sub 15 pin
HDMI terminal
HDMI type A connector
Video terminal
RCA Pin Jack
Audio In terminal
3.5 mm diameter mini-jack for COMPUTER IN/VIDEO (multiple use)
Audio Out terminal
3.5 mm diameter mini-jack
N ot e
• This model complies with the above specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the
future.
■ Separately sold product
PJ Replacement Lamp Type 26
62
English
Appendices
Trademarks
• DLP is trademarks of Texas Instruments.
• IBM is a trademark or registered trademark of International
Business Machines Corporation.
• Macintosh, Mac OS X, iMac, and PowerBook are trademarks
of Apple Inc., registered in the U.S. and other countries.
• Microsoft, Windows, Windows Vista, Internet Explorer and
PowerPoint are either a registered trademark or trademark
of Microsoft Corporation in the United States and/or other
countries.
• HDMI, the HDMI Logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
• Other product and company names mentioned in this user’s
manual may be the trademarks or registered trademarks of
their respective holders.
63
English
English
Download PDF
Similar pages