Pick the Topcon Sloping Laser Best For Your Job and Budget!
LS-B100 SERIES
Laser Receivers & Wireless Remote Display
RL-100 1S & RL-1002S
RT-5SW
RL-H3CS
HIGH ACCURACY, HIGH VALUE SLOPE LASERS
WIRELESS “SMART” SLOPE LASER
SELF-LEVELING CONSTRUCTION LASER
Topcon’s all new RL-100 Series sets new standards for
simplicity and accuracy. Rugged, lightweight, and compact, it’s twice the laser at an amazingly affordable price!
Topcon’s RL-100 Series revolutionary encoding system
provides the highest grade repeatability, 5 arc seconds,
of any other laser! No one even comes close. Setupafter-setup, time-after-time, you’re always right on grade!
The RT-5SW is the most repeatable laser in the world,
with a level vial 10 times more repeatable than the
competition! You’re also using world first technologies
like thermal software that’s derived from the characteristics of each RT-5SW after testing over extreme
temperature ranges, and an auto-alignment system so
unique, it’s patented.
Looking for a proven, rugged, reliable General Construction laser? A laser you can count on to increase
quality and efficiency, a laser that provides maximum
impact at a minimum price? You’ve found it. We have
an RL-H3 Series General Construction laser to meet all
of your jobsite needs, from layout to grade control.
Choose from two models, RL-100 1S single slope, or
RL-100 2S dual slope. The RL-100 1S provides single
slopes from –5% to up to +25% and comes complete
with Topcon’s new LS-80B laser receiver, sensor holder,
and batteries. Everything you need to get right to work.
Advanced technology, simple operation...
With the RT-5SW, simplicity starts with the RC-300
two-way communicating remote. All features of the
RT-5SW are accessible. Battery life, rotation speed, and
auto-alignment are a few of the time saving features
displayed on the large LCD.
The RL-100 2S provides dual slopes up of +/-10% in the
X axis, or up to an industry leading -5 to +25% in the
Y axis. The RL-100 2S standard package includes the
LS-80B laser sensor, sensor holder, batteries, plus the
all-new RC-400 remote that allows complete control of
the RL-100 2S up to 1000’ (300m) away!
SPECIFICATIONS
RL-100 1S/RL-100 2S
Repeatability
Horizontal Accuracy
Working Range
Rotation Speed
Wave Length
Laser Class
Operating Hours
Environment
Dims (w x h x d)
5 arc sec.
±10 arc sec.
2,500 ft. (770m)
300/600/900rpm
685nm visible
Class 3
65H (Alkaline)
50H (Ni-MH)
IPX6
8.55” x 9.96” x 6.6”
(217mm x 253mm x 168mm)
Slopes up to 25% can also be entered on the
RT-5SW without tilting the unit.
SPECIFICATIONS
RT-5SW
Accuracy
Range
Laser Source
Laser Power
RPM (Selectable)
Grade Range
without tilting unit
Battery Life (Alkaline)
Standard Warranty
Housing Construction
Environmental
±5” (1/32”@100’)
(1mm@40m)
4000’ Dia. (1200m Dia.)
Visible Diode (680nm)
High 4.5mW/
Low 2.5mW
300, 600, 900
X:±10% Y:±25%, 45 hrs. (4 D-cells)
2 years
Cast Aluminum
Water/Dustproof (IPX6)
The RL-H3CS levels and spins up just as fast, then
gives you the option of matching a slope.
Features:
• One button leveling
• High-speed self-leveling
• Slope matching capabilities to +/-5%
• 500’ (150m) radius operating range
• 600 rpm rotation speed (perfect for grade checking
and Machine Control applications)
• 60 hours operation from 4 “C” alkaline batteries
SPECIFICATIONS
It’s time.
Your local Authorized Topcon dealer is:
ISO 9001:2000
FM 68448
Topcon Positioning Systems, Inc.
7400 National Drive • Livermore, CA 94550
www.topconpositioning.com
Specifications subject to change without notice
©2009 Topcon Corporation All rights reserved. P/N: 7010-2017 Rev. A Printed in U.S.A. 01/09
RL-H3CS
Beam Type
Red (Visible Diode)
Beam Power
0.8mW (Max.)
Operating Range (radius)150m
Accuracy
±15 arc seconds
Self-Leveling Range
±5°
Slope Range
+/-5%
Rotation Speed
600 rpm
Power4 “C” size Alkaline
Batteries
Battery Life
Approx. 60 hours
Dimensions
6.5”L x 7.1”W x 7.4”H
(167mm x 182mm x 189mm)
Weight
4.1lbs (1.9kg) w/batteries
Indicate and automatic
solutions
•
•
•
•
•
•
•
Large working range
360° detection
Rugged, waterproof design
Wireless & CAN compatible
On-grade matching
Plumb/Tilt Indication
Universal pole clamp
LS-B100
LS-B110
LS-B110W
RD-100W
Looking for a great value on a Laser Sensor
for your earth moving machines?
With the added Slope and Plumb Indicators, your
grading and excavating accuracies are tighter than
ever with Topcon’s LS-B110.
The LS-B110W is a Laser Sensor with a Wireless
Remote Display . It is loaded with all the time
saving features as the other LS-B units and also
perfect for your larger machines where the Sensor
is out of view. This equipment offers the total solution in grade management. With the one touch
“On Grade” matching, MC automatic capability
and built-in Plumb and Slope Indicator, you can’t
go wrong.
The Remote Display puts the Laser Sensors
information in the cab of the machine. Productivity increases on the job because the operator
focuses on the grade information and not the
Sensor itself.
Check out the LS-B100. Fast to set up and
easy to use, this affordable depth control
sensor can be mounted to your equipment
and working within minutes. This unit is
packed full of features such as an Accuracy
Mode and Battery Life Indicator. Plus, it has
a Power Save/Auto Cut Off function to save
your battery life.
Plus, the new LS-B 110 enables you to offset the
“on-grade “ position with one touch. This gives
you an even greater working range.
The LS-B100 is a low-cost grade indicate solution that makes any operator more productive.
Compatible with Topcon’s family of Control Boxes
for all your earth moving equipment the LS-B110
can also be used in “automatic” mode to hydraulically control the elevation and/or the slope of
the cutting edge. This takes your production and
materials savings up to a whole new level.
SPECIFICATIONS
LS-B100 Receiver
SPECIFICATIONS
LS-B110 Receiver
SPECIFICATIONS
LS-B110W Receiver
Detective Range
Detective Angle
Detective Precision
Detectable Laser Wave Length
Laser Detecting Range
(diameter)
Internal Battery
External Power Supply
Continuous Operating Time
(+20ºC/+68ºF)
Operating Temperature
Water Proof
Dimensions (W/D/H)
Weight (Without cells)
175mm (6.6in)
360º
Mode1: ±3mm (0.009ft)
Mode2: ±6mm (0.019ft)
Mode3: ±15mm (0.049ft)
Mode4: ±30mm (0.098ft)
633 to 785nm
800m (2625ft)
(using RL-100 1S/2S)
C-size dry cells 4pcs.
Battery pack BT-68Q (sold separately)
DC 10V to 30V
Approximately 100 hours
(Using alkaline manganese dry cells)
Approximately 50 hours
(Using Battery pack BT-68Q)
-20ºC to + 50ºC (-4ºF to +122ºF)
IP66 (Based on the standard IEC60529)
158x166x357 (mm) (6.2”x6.5”x14.0”)
(With Mechanical Clamp)
2.0kg (4.4lbs)
Detective Range
Detective Angle
Detective Precision
Detectable Laser Wave Length
Laser Detecting Range
(diameter)
Internal Battery
External Power Supply
Continuous Operating Time
(+20ºC/+68ºF)
Operating Temperature
Water Proof
Dimensions (W/D/H)
Weight (Without cells)
250mm (6.8in)
360º
Mode1: ±3mm (0.009ft)
Mode2: ±6mm (0.019ft)
Mode3: ±15mm (0.049ft)
Mode4: ±30mm (0.098ft)
633 to 785nm
800m (2625ft)
(using RL-100 1S/2S)
C-size dry cells 4pcs.
Battery pack BT-68Q (sold separately)
DC 10V to 30V
Approximately 80 hours
(Using alkaline manganese dry cells)
Approximately 40 hours
(Using Battery pack BT-68Q)
-20ºC to + 50ºC (-4ºF to +122ºF)
IP66 (Based on the standard IEC60529)
158x166x357 (mm) (6.2”x6.5”x14.0”)
(With Mechanical Clamp)
2.0kg (4.4lbs)
Detective Range
Detective Angle
Detective Precision
Detectable Laser Wave Length
Laser Detecting Range
(diameter)
Wireless Communication
Range
Internal Battery
External Power Supply
Continuous Operating Time
(+20ºC/+68ºF)
Operating Temperature
Water Proof
Dimensions (W/D/H)
Weight (Without cells)
250mm (6.8in)
360º
Mode1: ±3mm (0.009ft)
Mode2: ±6mm (0.019ft)
Mode3: ±15mm (0.049ft)
Mode4: ±30mm (0.098ft)
633 to 785nm
800m (2625ft)
(using RL-100 1S/2S)
20m
(may vary depending on obstacles between the two instruments as well as other communications)
C-size dry cells 4pcs.
Battery pack BT-68Q (sold separately)
DC 10V to 30V
Approximately 40 hours
(Using alkaline manganese dry cells)
Approximately 18 hours
(Using Battery pack BT-68Q)
-20ºC to + 50ºC (-4ºF to +122ºF)
IP66 (Based on the standard IEC60529)
158x166x357 (mm) (6.2”x6.5”x14.0”)
(With Mechanical Clamp)
2.0kg (4.4lbs)
Put the LS-B110 W on your Dozer, then move it
to your Scraper and then onto your Excavator.
This equipment does it all on virtually all your
machines.
The operator can adjust the “On Grade” position
without leaving the seat. No need to climb down
to adjust the laser height or move the Sensor on
the machine.
Whether you are going deep with your excavator
or grading with a drag scraper the RD-100W is
wirelessly connected to the LS-B110W giving the
operator constant, real time grade information.
SPECIFICATIONS
RD-100W Receiver
Wireless Communication
20m
Range(may vary depending on obstacles between the two instruments as well as other communications)
Power Source
AA-size dry cells 3pcs.
Continuous Operating Time
Approximately 40 hours
(+20ºC/+68ºF)
(Using alkaline manganese dry cells)
Operating Temperature
-20ºC to + 50ºC (-4ºF to +122ºF)
Water Proof
IP66 (Based on the standard IEC60529)
Dimensions (W/D/H)
110x36x176(mm) (4.3”x1.4”x6.9”)
Weight (Without cells)
0.5kg (1.2lbs)
Download PDF
Similar pages