4 using a dmx512 controller

T
5 APPENDIX
ABLE OF CONTENTS
5.1
MAINTENANCE
12
PART 1 PRODUCT SPECIFICATIONS............................................1.
10
9
1.1--PRODUCT SPECIFICATIONS.......................................................1.
1.2--DIMENSIONS..............................................................................2.
1.3--PRODUCT FEATURES................................................................3.
1.4--SAFETY WARNING......................................................................4.
5
11
4
6
4
3
4
2
7
4
PART 2 INSTALLATION................................................................5.
2.1--MOUNTING...................................................................................5.
2.2--SETTING UP.................................................................................6.
2.3--FUSE REPLACEMENT..................................................................6.
2.3--GOBO REPLACEMENT.................................................................7.
14
16
13
15
17
4
PART 3 DISPLAY PANEL OPERATION............................................8.
18
3.1-- BASIC ..........................................................................................8.
3.2-- MENU ..........................................................................................8.
3.3--INTRO..........................................................................................9.
3.4--INVERT........................................................................................10.
3.5--RANGE........................................................................................10.
3.6--SPECIAL......................................................................................11.
3.7--EDIT............................................................................................11.
3.8--DEFAULT....................................................................................12.
23
22
20
21
11
PART 4 USING DMX512 CONTROLLER........................................12.
4.1--BASIC ADDRESSING ................................................................ 12.
4.2--CHANNEL ASSIGNMENT........................................................... 12.
No
ITEM
Head cover
6.1--MAINTENANCE........................................................................17.
ITEM
LED PCB
No
ITEM
Pan belt
Motor driver board
Display PCB
70 lenses
Motor
Fan
Power switch
Back cover
Power socket
Rotation gobo wheel
Arm
Fuse
Color wheel
Tilt belt
Handle
Wheel fixer
Master PCB
XRL Plug(male/female)
Head cover
LED driver PCB
120 lenses
PART 5 APPENDIX........................................................................17.
No
CHANNEL
VALUE
FUNCTION
STROBE
Close
Open
Strobe: Slow > Fast
Open
Rulse strobe effect: Slow > Fast
Open
Random strobe effect: Slow > Fast
Open
CONTROL
No function
Pan/tilt black activated (activated after 3 secs)
Pan/tilt black deactivated (activated after 3 secs)
No function
Auto1
Auto2
Test
Custom
Sound 1
Sound 2
Reset
No function
1 PRODUCT SPECIFICATIONS
1.1 PRODUCT SPECIFICATIONS
Electrical
Voltage:AC100~240V 50/60Hz
Rated Power:220W
LED
LED:1PC(130W white)
Cooling:Forced air convection
Optical System
Focus:Electronic linear focus
Focus:Electronic focus
Dimmer:0~100%
Strobe:0~20Hz
Rotating 3-facet Prism
Operation
Control mode: DMX512/Master-Slave/Auto/Custom/ Sound
LCD display
DMX512 Chs:14CHS/ 17CHS
Pan/Tilt
Pan 540
Tilt 270
Pan/Tilt speed
User-selectable Pan/Tilt ranges
Reverse Pan/Tilt movement
Rotating Gobo
6Gobo (interchangeable)
Gobo-flow effect
Gobo shake
Bi-directional rotation
Color
7 dichroic - filters + white
Rainbow - flow effect
Other features
Custom program (255 steps)
Size:387x321x605mm
Weight:22kg
1.2
DIMENSIONS
CHANNEL
VALUE
FUNCTION
GOBO WHEEL 1 ROTATION
indexing
Clockwise rotate from slow to fast
No function
Anti-clockwise rotate from slow to fast
GOBO 2
NO GOBO
GOBO 1
GOBO 2
GOBO 3
GOBO 4
GOBO 5
GOBO 6
Shaking gobo 6
Shaking gobo 5
Shaking gobo 4
Shaking gobo 3
Shaking gobo 2
Shaking gobo 1
Flow effect
GOBO WHEEL 2 ROTATION
indexing
Clockwise rotate from slow to fast
No function
Anti-clockwise rotate from slow to fast
PRISM & PRISM ROTATION
White
NO FUNCTION
Prism anti- clockwise rotation (slow to fast)
NO FUNCTION
Prism clockwise rotation (slow to fast)
IRIS
Linear Iris
Iris effct: fast close & slow open (slow to fast)
Iris effct: slow close & slow open (slow to fast)
Iris effct: slow close & fast open (slow to fast)
Iris effct: fast close & fast open (slow to fast)
Iris effct: Random (slow to fast)
FOCUS
Far
Near
ZOOM
Zoom 1
Zoom 2
DIMMER
Dark
Bright
CHANNEL
VALUE
FUNCTION
STROBE
Close
Open
Strobe: Slow > Fast
1.3
PRODUCT FEATURES
Open
Rulse strobe effect: Slow > Fast
Open
Random strobe effect: Slow > Fast
Open
1
2
CONTROL
No function
Pan/tilt black activated (activated after 3 secs)
Pan/tilt black deactivated (activated after 3 secs)
No function
Auto1
Auto2
Test
Custom
Sound 1
Sound 2
3
Reset
No function
BASIC
CHANNEL
VALUE
FUNCTION
PAN
0~540
TILT
0~270
4
6
5
COLOR WHEEL
Red
Green
Yellow
Blue
Orange
7
9
8
10
11
Magenta
Light Green
Rainbow or linear effect
FIXED GOBO WHEEL
NO GOBO
GOBO 1
GOBO 2
GOBO 3
GOBO 4
GOBO 5
GOBO 6
Shaking gobo 6
Shaking gobo 5
Shaking gobo 4
Shaking gobo 3
Shaking gobo 2
Shaking gobo 1
Flow effect
12
No
ITEM
No
ITEM
1
Head
7
Up
2
Side arm
8
Switch
3
Handle
9
4
Menu
10
DMX 3-PIN signal input
5
Enter
11
DMX 3-PIN signal output
6
Down
12
Fuse holder
Power input
1.4
SAFETY WARNING
IMPORTANT
This product must be installed by a qualified professional.
Always operate the equipment as described in the user manual.
A minimum distance of 0.5m must be maintained between the equipment
and combustible surface.
The product must always be placed in a well ventilated area.
Always make sure that the equipment is installed securely.
DO NOT stand close to the equipment and stare directly into the LED light
source.
Always disconnect the power supply before attempting and maintenance.
Always make sure that the supporting structure is solid and can support
the combined weight of the products.
The earth wire must always be connected to the ground.
Do not touch the power cables if your hands are wet.
CHANNEL
FUNCTION
VALUE
FIXED GOBO WHEEL
NO GOBO
GOBO 1
GOBO 2
GOBO 3
GOBO 4
GOBO 5
GOBO 6
Shaking gobo 6
Shaking gobo 5
Shaking gobo 4
Shaking gobo 3
Shaking gobo 2
Shaking gobo 1
Flow effect
GOBO WHEEL 1 ROTATION
indexing
Clockwise rotate from slow to fast
No function
Anti-clockwise rotate from slow to fast
GOBO WHEEL 1 & GOBO SHAKE
NO Gobo
This product left the place of manufacture in perfect condition. In order to
maintain this condition and for safe operation, the user must always follow
the instructions and safety warnings described in this user manual.
Avoid shaking or strong impacts to any part of the equipment.
Make sure that all parts of the equipment are kept clean and free of dust.
Always make sure that the power connections are connected correct and
secure.
If there is any malfunction of the equipment, contact your distributor
immediately.
I t is important that the power cable is frequently inspected to ensure that
there is no damagein any position. If the power cable is damaged in any way,
it should be replaced by a qualified electrical technician.
When transferring the product, it is advisable to use the original packaging
in which the product left the factory.
Shields, lenses or ultraviolet screens shall be changed if they have
become damaged to such an extent that their effectiveness is impaired.
The lamp (LED) shall be changed if it has become damaged or thermally
deformed.
Gobo
Gobo
Gobo
Gobo
1
2
3
4
Gobo 5
Gobo 6
Shaking gobo 6
Shaking gobo 5
Shaking gobo 4
Shaking gobo 3
Shaking gobo 2
Shaking gobo 1
Flow effect
GOBO WHEEL 2 ROTATION
indexing
Clockwise rotate from slow to fast
No function
Anti-clockwise rotate from slow to fast
PRISM & PRISM ROTATION
White
NO FUNCTION
Prism anti- clockwise rotation (slow to fast)
NO FUNCTION
Prism clockwise rotation (slow to fast)
IRIS
Linear Iris
Iris effct: fast close & slow open (slow to fast)
Iris effct: slow close & slow open (slow to fast)
Iris effct: slow close & fast open (slow to fast)
Iris effct: fast close & fast open (slow to fast)
Iris effct: Random (slow to fast)
FOCUS
Far
Near
ZOOM
Zoom 1
Zoom 2
DIMMER
Dark
Bright
3.8
DEFAULT
2 INSTALLATION
MENU
Default
Default
No
Yes
Default
This functions will reset all setting to the original factory setting
4 USING A DMX512 CONTROLLER
4.1
BASIC ADDRESSING
2.1
MOUNTING
The LED fixture can be operated in any position at any angle. When mounted
on a flat surface, the surface must be strong enough to support 10 times the
weight of the fixture and stable so that there will be no damage caused to the
fixture or surrounding people or objects because of movements of the fixture
on the surface.
When the unit is mounted in a hanging position, the fixture is attached using the
mounting brackets and a standard truss clamp or other clamping device. The
mounting brackets supplied are mounted using quick-release locks allowing
simple mounting or removal.
Connect all of the units in series using standard DMX512 signal cable .
Set the DMX512 address in the DMX menu.
It is possible to have the same DMX address or independent addresses for each
fixture.
4.2
CHANNEL ASSIGNMENT
Note: This product have two DMX512 channel configuration:
ADVANCED and BASIC .
ADVANCED
CHANNEL
1
2
3
4
5
FUNCTION
VALUE
PAN
255
0~540
0
255
PAN FINE
Fine control of pan movement
0
255
0~270
0
255
Fine control of tilt movement
0
255
0
TILT
CLAMP
SAFTY CABLE
BRACKET
TILT FINE
PAN/TILT SPEED
From fast to slow
COLOR WHEEL
NO
Red
Green
6
Yellow
Blue
Orange
Magenta
Light Green
Rainbow or linear effect
IMPORTANT SAFETY NOTE!!
Always use a safety cable when installing this unit!!
Be sure that the safety cable is connected to a solid load-bearing structure.
2.2
3.6
SETTING UP (STAND ALONE)
The LED fixture can be used as a stand alone unit. The stand alone
functions AUTO 1, AUTO 2, SOUND 1, SOUND2 and CUSTOM can be
activated without the need to connect to any controller or connecting to
any other equipment.
Simply, access the <operation> menu from the DISPLAY and select the
target program to activate.
SPECIAL
Black
Enter Black
delay
to choose
No
Reset
Enter Reset to choose DMX
cannot control reset
without delay or
Yes
DMX control reset or
3seconds
System
DMX
Zoomblack
Enter [Zoomblack] to choose automatic blackout when zooming .
2.3
3.7 EDIT
FUSE REPLACEMENT
Remove the safety cap by a screwdriver.
F etch the old fuse from safety cap.
I nstall a new fuse.
I nstall the safety cap.
SAFTY CAP
Edit
FUSE
Enter the Edit mode to
value of Step , Pan ,
Gobo 2 , Gobo2rot ,
Strobe , Time
Enter Use and select
edit the custom programs by adjusting the
Tilt , Color , Gobo 1 , Gobo1rot
Prism , Iris , Focus , Zoom ,
Yes
,
to run the steps user need.
Note: if user want to circulate the created steps, please set the last step's
T ime as 0
For example, there are
Step 1
Step 2
Step 3
3 steps, the setting should be like belowed:
T ime = 4
Use = Yes
T ime = 5
Use = Yes
T ime = 0
Use = Yes
Channels
Enter Channels
Advanced .
Display
Enter Display
to select the DMX channel modes: Basic
;
2.4
GOBO REPLACEMENT
Take off the head and mouth cover .
Remove the prism supports;
Remove the Rotating Gobo wheel supports
Replace the Gobos or Colors.
I nstall all parts on the original position.
to select the lighting time of the LCD display panel.
Keylock
Enter the Keylock mode to select whether the access password is on
or off.
When the fixture is set as PASS ON , after 30 seconds or turn on the
fixture next time, the fixture will need an access password to enter the
display menu control.
Head cover
Rotating gobo wheel
Note: The factory access password is UP + DOWN + UP
+ DOWN , then press ENTER to confirm the access.
Info
Enter
3.4
Info
Static gobo wheel
Rotating gobo wheel supports
Mouth cover
to see the version of the software.
INVERT
MENU
Invert
Pan
Normal
Reverse
Tilt
Normal
Reverse
Color
Step
Linear
Use
No
Yes
Invert
Select Pan / Tilt to set Normal or Reverse
Select Color to select the color wheel flow way Step
Enter Use and set Yes to run the new setting
3.5
or
linear
RANGE
MENU
Range
P/start
(000~255)
P/Finish
(000~255)
T/start
(000~255)
T/Finish
(000~255)
Use
No
Yes
P/start
Set pan start value
P/Finish
Set pan finish value
T/start
Set Tilt start value
T/Finish
Set Tilt finish value
Use
Enter
Use
Color wheel
000~255
000~255
000~255
000~255
and select Yes to open the operation of X/Y angle
3 DISPLAY PANEL OPERATION
3.1
BASIC
MENU Scroll through the main menu or exit from the current sub-menu
ENTER Enter the currently selected menu or confirm the current function
value
DOWN Scroll 'DOWN' through the menu list or decrease the value of the
current function
UP
Scroll 'UP' through the menu list or increase the value of the
Current function
3.2
MENU
3.3 INTRO
Address
Enter Address
to set the DMX Address, which is from (001-512)
Reset
In order to rest custom modest to default, select
Reset
Run
Enter Run to select the operation mode: DMAX512 ; Auto1 ;
Auto2 ; Sound 1 ; Sound 2 ; Custom ; Test ; Slave
Download PDF
Similar pages