Sollysta Metalclad
USB Socket
Sollysta Metalclad
USB Socket
To allow the USB charging of up to two
portable devices. Tested to the relevent
clauses of BS 1363-2:2016+Annex.
The Sollysta metalclad range of wiring accessories has evolved to meet
the requirements in commercial markets, with innovations such as the
the unique safety shutter mechanism requiring all three pins to be
inserted to activate the shutter, on all 13A socket outlets for safety and
all screw terminals facing the same way for ease of installation.
Our Sollysta metalclad USB socket was designed to meet the increased
requirements for USB charging in the home and at work. The twin ports
provide a total of 2.4A charging capacity at 5V d.c. and our intelligent
connection ensures optimum charging performance.
The dual USB adapter communicates with the USB device identification
circuitry. This allows the USB socket to identify itself as a dedicated
charger for the connected USB devices.
Description
WPSS82-USB
Cat ref. Plate Only
Cat ref. With Backbox
Without Knockouts
Cat ref. With Backbox
With Knockouts
WPSS82W-USB
WPSS82BW-USB
WPSS82BKOW-USB
WPSS82-USB
WPSS82B-USB
WPSS82BKO-USB
White
2 Gang Double Pole Switch Socket with Two USB Ports
Grey
2 Gang Double Pole Switch Socket with Two USB Ports
Features & Benefits
--
--
--
Twin charging ports: The USB socket comes with two charging ports
capable of delivering a total maximum charging current of 2.4A. This
can be delivered to either port, or divided between the two ports as
required, and controlled by the devices being charged. The ports are
marked 5V === 2.4A.
Intelligent connection: The sollysta USB socket has built in intelligent
connection, enabling the socket to identify itself as the dedicated
primary charger for the connected device. This allows for maximum
charging capacity and improved charging speeds, as the device allows
the socket to bypass its trickle charging mode.
Standby Power: In standby mode the power consumption is <150mW
and the average current (rms) < 1 milli amp
Hager Ltd. Hortonwood 50, Hortonwood, Telford, TF1 7FT / 01952 675 612
---
----
---
The USB charger is suitable for carging most portable electronic
devices with a type A plug.
Can be installed in 35mm back boxes. A 10mm spacer is supplied for
installations where an existing 25mm backbox is installed. This spacer
is colour matched to the insert of the socket.
Net weight: 0.273 kg
Tested by Nemko UK to all relevant clauses of BS 1363-2:2016 +
Annex and deemed to comply.
The USB charger is protected against over-current and short circuit
conditions on the output by a non-replaceable fuse. (i.e. the product
will fail safe).
Over load protection on output: 2.8+/-0.3A.
Fuse rating: 3.15A/240VAC .
1
Sollysta Metalclad
USB Socket
Technical characteristics - USB Charging Ports
Number of Ports
2
Intelligent Connection
Yes
USB Output
5V d.c. 2.4A total max.
Standby Power Consumption
≤0.15W
Overload Protection on Output
2.8±0.3A
Technical characteristics - Socket
Standard
Sockets Comply with BS 1363-2
Voltage Rating
220-240V a.c.
Current Rating
13A per Socket Outlet
Terminal Capacity
3 x 2.5mm²
3 x 4.0mm²
2 x 6.0mm²
Earth
Twin Earth
Switching
Double Pole Switching Mechanism
Warranty - Hager undertakes to replace or repair at its discretion products should they become inoperable within the time periods as stated. - 2 Years
C
A
Dimensions
D
Catalogue Reference
A (mm)
B (mm)
C (mm)
D (mm)
WPSS82*-USB
146
86
39.5
26.5
B
Mounting Depth
Hager Ltd. Hortonwood 50, Hortonwood, Telford, TF1 7FT / 01952 675 612
Range
Part Reference
Min Mounting
Depth with
Spacer
Min Mounting
Depth without
Spacer
Metalclad
WPSS82X-USB
25mm
35mm
2
Download PDF
Similar pages