OPERATIONAL &

Security Engineered Machinery Co., Inc
OPERATIONAL & MAINTENANCE MANUAL
SEM Model 2226CC/3 with Oiler
Starting with serial # 6263636 and up
REV: 3
As of November 22, 2011
Security Engineered Machinery Co., Inc
NATIONWIDE SERVICE
Phone Toll Free 1(800)225-9293
Email: Service@SEMSHRED.COM
Fax: (508)366-6814
Website: www.semshred.com
Table of Contents
READ CAREFULLY BEFORE USING
Proper care of your new paper shredder will ensure many years of trouble free operation, with minimum of
maintenance or repair.
IMPORTANT: Please note that all packaging should be retained by the customer for (30) days from the
time of receipt. In the event that this unit needs to be sent back for replacement or repair this packaging will
be required to do so. Should the packaging have been discarded before the (30) day requested period,
packaging costs will be incurred by the customer.
Contents
Page No.
Safety Procedures…………………………………………………………………………………………2-4
Installation and Set-up………….…………………………………………………………………...............5
Operation and Feeding …………………………………………………………………………….……..6-9
Maintenance.…………………………………..…………………………………………………………...10
Troubleshooting…………………………………………………………………………………….…..11-14
Accessories…………………………………………………………………………………………………15
Technical Information……………………………………………………………………………………..,15
Parts List ………………………………………………………………………………………………..16-22
Customer Service
Security Engineered Machinery Co., Inc.
PO Box 1045
5 Walkup Drive
Westboro, MA 01581
Tel: 800-225-9293
Fax: 508-366-6814
Website: www.semshred.com
E-mail: info@semshred.com
Order On-line:
GSA Customers:
Commercial Customers:
www.fedshred.com
www.semshred.com
IMPORTANT
Two to three preventive maintenance calls per year are recommended
Only authorized SEM service personnel should be allowed to service the shredder.
For NATIONWIDE SERVICE Call 1 (800) 225-9293
1
***IMPORTANT SAFETY PROCEDURES***
Your new paper shredder incorporates powerful, heavy duty cutting mechanisms, serious and permanent
injury may result if proper precautions are not followed.
1. This equipment should never be operated by children or individuals that are untrained
or incapable of understanding these safety precautions!
2. Do not reach into the feed opening for any reason! Never insert fingers, hands, other
extremities, or objects not meant to be shredded into the feed opening!
3. Do not operate or come in close proximity to this equipment wearing long hair,
necktie, loose clothing, or jewelry which may activate a photoelectric on/off switch
and/or be pulled into the shredder.
4. Maintenance or repair of this equipment should be performed only be trained,
authorized service personnel.
5. Always disconnect electrical power (unplug) before removing or opening the cover or
other panels providing access to internal mechanisms.
SPECIFICATIONS
Shred Size
0.9 x 4.2 mm
Sheet Capacity * Up to 8 Sheets
Feed Opening
10.25”
Dimensions
34.5”H x 19.5”W x 18.5”D
Weight
112 lbs.
*Results may vary depending on power source, operator/proper maintenance and paper type.
For NATIONWIDE SERVICE Call 1 (800) 225-9293
2
***IMPORTANT SAFETY PROCEDURES***
The door must be closed when operating the document shredder.
Ensure free access to mains.
Automatic standby that switches off after 1 hour.
Green LED control light is off.
For NATIONWIDE SERVICE Call 1(800) 225-9293
3
***IMPORTANT SAFETY PROCEDURES***
Unplug from the main before cleaning the machine!
Do not operate the machine without the safety flap (A).
ON/OFF→Quick Stop→Open the door!
For NATIONWIDE SERVICE Call 1(800)225-9293
4
INSTALLATION
Open the door; place the machine into the top
of the cabinet. We recommend that two people
set up this unit! Beware of fingers!
Installing the oiler:
• Take the oiler holder out of the cabinet and hook it into the
side of the cabinet (A).
• Remove the lid from the oiler (B)
• Remove the stopper from the oil tube (C)
• Put the oil tube into the oiler and screw on (D)
•The oil bottle has a fill level indicator (E)
Close the door; Plug into wall socket.
For NATIONWIDE SERVICE Call 1(800)225-9293
5
OPERATION
When Using for the first time the oil pump starts
automatically:
•Press after approximately 15 seconds and a red blinking
LED (A) disappears.
When the oil bottle (B) is changed:
•Press the rocker switch “R” until the LED (A) no longer
blinks red.
Flashing LED
(A):
•Cutting shafts are automatically oiled.
Warning:
Materials other than common office paper may jam and /or
damage the cutting unit. Paper clips and staples should be
removed from material being destroyed to prolong life and
trouble-free operation of the cutting unit.
For NATIONWIDE SERVICE Call 1(800)225-9293
6
OPERATION Cont….
Press the rocker switch (1): green light is on, the
machine is now ready for operation. Starts automatically
when paper is inserted. Automatic standby that switches
off after (1) one hour Green LED control light is off.
LED shows red (A).
Stops automatically if too much paper is inserted.
Automatic reverse if too much paper is inserted.
LED shows yellow (B).
Maximum sheet capacity during shredding process.
LED Shows green (C).
Normal sheet capacity during shredding process.
Important: Between paper insertion allow the
machine to return to the LED green light. (C) If you
insert paper while the LED yellow light (B) is lit you may
cause a paper jam, (See page 9 for paper jams).
Stops automatically when no further paper is inserted.
For NATIONWIDE SERVICE Call 1(800)225-9293
7
OPERATION Cont….
Stops automatically when door is opened symbols
and
flash alternatively.
Stops automatically when plastic bag is full. Empty
the bag when “bag full” indicator
lights.
(see page 5 fig. 4)
Stops automatically if too much paper is inserted.
Automatic reverse if paper jams
(Symbol “ON/OFF” flashes).
For NARTIONWIDE SERVICE Call 1(800)225-9293
8
OPERATION Cont….
If required: (Paper Jam)
Press the rocker switch “R” and remove paper. (Machine
runs for a short time in reverse, if required repeat several
times).
Reset by pressing the rocker switch . Re-feed the
paper in smaller quantities.
Automatically stops if safety flap (A) is opened
(symbols
and
flash alternatively). Close the safety
flap and press the rocker switch , paper is shredded. To
remove any paper debris from a paper jam the machine
runs for a short time reverse with open safety flap.
For NATIONWIDE SERVICE Call 1(800)225-9293
9
TROUBLESHOOTING
Machine will not start.
Is the machine plugged in?
Is the rocker switch pressed?
Is the green light rocker switch is ON? (1)
Insert paper (2).
For NATIONWIDE SERVICE Call 1(800)225-9293
10
TROUBLESHOOTING Cont….
Feed the paper into the center of the feed opening.
(photo cell) (A)
Is the door open?
Is the bag full?
For NATIONWIDE SERVICE Call 1(800)225-9293
11
TROUBLESHOOTING Cont….
Is the safety flap open?
“Bag full” indicator illuminates but bag is not full.
• Disconnect from the mains.
•Remove paper debris between the cutting head
(A) and flap (B) with a brush. Picture shows the
machine from underneath.
For NATIONWIDE SERVICE Call 1(800)225-9293
12
TROUBLESHOOTING Cont….
Machine will not stop.
Unplug from the main. Clean the photo cell (A)
with a small brush or Q-tip with isopropyl
(rubbing alcohol)
Machine stops.
Overload protection. Cooling down period
approximately 10-15 minutes.
• Symbols
and “R” flash alternatively.
• Symbol
lights green, machine is ready
for operation.
None of the above mentioned methods helped
to solve the problem:
Contact our customer service at 1(800)225-9293
For NATIONWIDE SERVICE Call 1(800)225-9293
13
ACCESSSORIES
Environmentally friendly oil (1 gallon)
Part # 647OILHV
Plastic Bags (50 pieces)
Part # 640SB130A
For NATIONWIDE SERVICE Call 1(800)225-9293
14
TECHNICAL INFORMATION
Do not shred paper clips.
Do not destroy CD/DVD’s.
This machine is approved by independent safety
laboratories and is in compliance with the EC-regulations
98/37/EG, 2006/95/EG and 2004/108/EG.
Sound Level Information:
The sound level at the work place is less than the ISO 7779
standard’ maximum permissible level of<70 db (A).
The exact technical specifications can be found on the
technical specifications sticker on the machine.
To claim under guarantee, the machine must still carry its
original identification label.
Subject to alterations without notice.
For NATIONWIDE SERVICE Call 1(800)225-9293
15
For NATIONWIDE SERVICE Call 1(800)225-9293
16
For NATIONWIDE SERVICE Call 1(800)225-9293
17
For NATIONWIDE SERVICE Call 1(800)225-9293
18
For NATIONWIDE SERVICE Call 1(800)225-9293
19
For NATIONWIDE SERVICE Call 1(800)225-9293
20
For NATIONWIDE SERVICE Call 1(800)225-9293
21
For NATIONWIDE SERVICE Call 1(800)225-9293
22