service and customer
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised Kenwood
At the end of its working life, the product
must not be disposed of as urban
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
Disposing of a household appliance
separately avoids possible negative
consequences for the environment and
health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need to
dispose of household appliances
separately, the product is marked with
a crossed-out wheeled dustbin.
If you need help with:
● using your machine or
● servicing, spare parts or repairs (in or
out of guarantee)
call Kenwood customer care on 023
9239 2333. Have your model
number ready – it’s on the
underside of the power unit.
● spares and attachments
call 0870 2413653.
● other countries
Contact the shop where you bought
your machine.
guarantee (uk only)
If your blender goes wrong within
one year from the date you bought
it, we will repair it (or replace it if
necessary) free of charge provided:
you have not misused, neglected or
damaged it;
it has not been modified (unless by
it is not second-hand;
it has not been used commercially;
you have not fitted a plug incorrectly;
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
carrot and coriander
25g butter
50g onion chopped
1 clove garlic crushed
640g carrot cut into 11⁄2 cm cubes
cold chicken stock
10-15ml (2-3tsp) ground coriander
salt and pepper
1 Melt the butter in a pan, add the
onion and garlic and fry until soft.
2 Place the carrot into the liquidiser,
add the onion and garlic. Add
sufficient stock to reach the 1.6L
level marked on the goblet. Fit the lid
and filler cap.
3 Select the soup setting or blend on
high speed for 5 seconds for a
coarse soup or longer for a finer
4 Transfer the mixture to a saucepan,
add the coriander and seasoning
and simmer the soup for 30 to 35
minutes or until cooked.
5 Adjust the seasoning as necessary
and add extra liquid if required.
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
BL650 series
Use your blender for soups, sauces,
drinks, pâtés, mayonnaise, dressings
before using your Kenwood
Read these instructions carefully and
retain for future reference.
Remove all packaging and any
Allow all liquids to cool to room
temperature before placing them in
the blender.
Switch off and unplug:
● before fitting or removing parts
● after use
● before cleaning.
Keep hands and utensils out of the
blender when it’s on the power unit.
Don’t touch the sharp blades.
Never let the power unit, cord or
plug get wet.
Never use a damaged machine. Get
it checked or repaired: see ‘service’.
Never use an unauthorised
Never leave the machine on
When removing the blender from the
power unit:
● wait until the blades have
completely stopped;
● don’t accidentally unscrew the
goblet from the blade unit.
Never run the blender empty.
Always unplug your blender
when not in use.
Only operate the blender with the lid
in place.
Important - The skirt on the base
of the goblet is fitted during
manufacture and no attempt should
be made to remove it.
Misuse of your blender can result in
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
Children should be supervised to
ensure that they do not play with the
Only use the appliance for its intended
domestic use. Kenwood will not accept
any liability if the appliance is subject to
improper use, or failure to comply with
these instructions.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
Important – UK only
The wires in the cord are coloured
as follows:
Blue = Neutral,
Brown = Live.
The appliance must be protected by
a 3A approved (BS1362) fuse.
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut off it
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
6 Place the blender onto the power
unit and turn clockwise to lock .
7 Select the required program or speed
and the button will light up.
Choose from the following options:
● Select one of the 5 pre-programmed
buttons. The blender will switch off
automatically at the end of the preset time. If you wish to stop before
the pre-set time, press the stop
● Select one of the manual speed
options - HIGH (III), MEDIUM (II) or
LOW Speed (I). At the end of
blending press the OFF button.
● Pulse button - operates the motor in
a start/stop action. The pulse will
operate for as long as the button is
held down.
before using for the first time
1 Wash the parts: see ‘cleaning’.
blade unit
sealing ring
filler cap
locking lid
pulse button
OFF button
speed control buttons
pre-program buttons
power unit
cord storage
to use your blender
1 Fit the sealing ring ensuring the
seal is fully located under the rim of
the blade unit.
Leaking will occur if the seal
is damaged or not fitted
2 Hold the underside of the blade unit
and insert the blades into the
goblet - turn anti-clockise to lock .
3 Put your ingredients into the goblet.
4 Clip the filter to the lid .
● The filter has two sieve sizes to filter
out any fibrous or unprocessed
ingredients when pouring.
● Turn the filler cap to change the
sieve size selected over the spout
area 5 Fit and lock the lid by turning
clockwise - ensure that the ▼
mark on the lid lines up with the ▲
mark on the goblet. The blender
will not operate if the lid is
not fitted or not locked
To ensure long life of your blender,
never run it for longer than 60
seconds. Switch off as soon as
you’ve got the right consistency.
Don’t process spices – they may
damage the plastic.
The machine won’t work if the
blender is fitted incorrectly.
Don’t put dry ingredients into the
blender before switching on. If
necessary, cut them into pieces;
remove the filler cap; then, with the
machine running, drop them through
one by one. Keep your hand over
the opening. Empty regularly.
Don’t use the blender as a storage
container. Keep it empty before and
after use.
Never blend more than 1.6 litres
or more than 800 mls for frothy
liquids like milkshakes.
Smoothie recipes - never blend
frozen ingredients that has formed a
solid mass during freezing, break it
up before adding to the goblet.
Always ensure that the filter is fitted
to the lid assembly before use.
pre-program setting speed chart
During operation of the pre-program settings a change in speed
may be noted - this is normal
pre-program usage
Drinks and thick mixes ie pâtés
1.6 litres
30 secs
Frothing milk
800 mls
Smoothie drinks
1 litre liquid
Place the fresh fruit and liquid
ingredients in first (includes
yoghurt, milk and fruit juices).
Then add ice or frozen ingredients
(includes frozen fruit, ice or
ice cream)
1 egg
150 mls oil
All types of soup mixes
1.6 litres
25 secs
All types of batter/light sauce
mixes and scrambled eggs
1 litre
Fruit and vegetable purées (add 200g
liquid if difficult to process).
Chopping e.g. nuts, breadcrumbs 100g
and biscuit crumbs etc.
Note: Slow start when
program selected
Ice Crushing
6 cubes
Automatic pulsing action
25 secs
15 secs
power unit
Wipe with a damp cloth, then dry.
● Store excess cord in the storage
area at the back of the power
unit .
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the machine running,
pour the oil down slowly through the
hole in the lid.
Thick mixtures, e.g. pâtés and dips,
may need scraping down. If it’s
difficult to process, add more liquid.
blade unit
1 Remove the blade unit from out of
the goblet by turning clockwise to
2 Remove and wash the sealing ring.
3 Don’t touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don’t immerse the
blade unit in water.
10 secs
Always switch off, unplug and
dismantle before cleaning.
Empty the goblet before unscrewing
it from the blade unit.
Do not place any parts in the
other parts
Wash by hand, then dry.
Download PDF
Similar pages