Daily Digital Timer
Easy Set Indoor Digital Timer with LCD Display
TIME
ON
2-Wire Polarized Outlet and Plug
Rating: 120V/5A/600W Resistive (Appliance)
120V/5A/60W Tungsten (Incandescent)
Customer Service Assistance:
Toll Free 1-800-730-3707
OFF
RESET
HOUR
MIN
FEATURES EXPLAINED:
Your lamp timer can be programmed to turn a lamp on and off automatically, once per day.
INSTRUCTIONS:
 Plug the lamp timer into the wall and wait for at least 30 minutes to charge the built-in rechargeable
battery. This will allow the lamp timer to be programmed and keep time even when it is not plugged in.
The timer must be plugged into the wall outlet to operate your lamp.
 Before using the timer, make sure that the lamp works by plugging it into the wall outlet.
 While the lamp is on, unplug it from the wall.
 Set the timer to the current time and program it to turn your lamp ON and OFF using the instructions below.
 Plug the lamp into the timer and plug the timer into the wall.
 Your lamp timer will turn your lamp ON and OFF automatically.
SETTING INSTRUCTIONS:
For the first time setting the timer, press the RESET button with a sharp object such as an opened paper clip
to reset and clear any previously set program.
TO SET THE CURRENT TIME:
 While holding the TIME button down, press HOUR until the current hour is displayed (noting AM or PM).
 To set to the current minute, hold TIME and press MIN until the current minute is displayed.
 The lamp timer will display and keep current time when the TIME button is released.
(Example: Display will read “TIME 12:14 AM”)
TO SET THE TIME AT WHICH YOUR LAMP WILL TURN ON:
 While holding the ON button down, press HOUR until the “on” hour is displayed (noting AM or PM).
 To set to the “on” minute hold ON and press MIN until the “on” minute is displayed.
(Example: Display will read “ON 6:30 PM”)
 The lamp timer will display current time when the ON button is released. To view the programmed
“on” time, press ON.
TO SET THE TIME AT WHICH YOUR LAMP WILL TURN OFF:
 While holding the OFF button down, press HOUR until the “off” hour is displayed (noting AM or PM).
 To set to the “off” minute hold OFF and press MIN until the “off” minute is displayed.
(Example: Display will read “OFF 11:30 PM”)
 The lamp timer will display current time when the OFF button is released. To view the programmed “off”
time, press OFF.
MANUAL OVERRIDE:
 Press TIME and ON simultaneously to turn the lamp continuously ON.
 Press TIME and OFF buttons simultaneously to turn the lamp continuously OFF.
 Press ON and OFF buttons simultaneously to go back to programmed control.
SAVE THIS INSTRUCTION!
Manufactured and Distributed by: The NCC,
Brooklyn, NY 11220 • www.thencc.com
Made in China
Download PDF
Similar pages