Gerard-Brochure-DIGINET-LEDSmart-Plus-Rotary-Dimmer-Kit

SINGLE & MULTI-WAY DIMMING
WITHOUT EXTRA WIRES OR CONTROLS
Multi-Way
Dimming
Click
switch
Dim
to
0%
Illuminated
halo
The simple solution
to multi-way control
Diginet LEDsmart+ is an unique dimmer
™
with integrated switch and timer. It is
Diginet LEDsmart+ delivers a simple solution for
single and multi-way control with:
™
powered by MultiMate™ technology that
■■
INTEGRATED switch and timer
allows multiple dimmers to be connected
■■
NO additional wiring
in parallel.
■■
NO expensive control systems needed
2
Although optimised for LED lighting loads, LEDsmart+
™
also provides excellent compatibility with other
common lamps types such as incandescent lamps,
12V halogen lamps and dimmable CFLs.
This technical guide will show you how easy and
simple it is to install LEDsmart+ products powered
by MultiMate™ technology.
™
3
MultiMate Technology —
making the impossible
possible
TYPICAL WIRING FOR MULTI-WAY CONTROL USING PRODUCTS WITH MULTIMATE™ TECHNOLOGY
™
Diginet LEDsmart+ with integrated switch
™
and timer is powered by MultiMate™,
a revolutionary new technology developed
by Diginet Control Systems — part of the
Gerard Lighting group that allows multiway control of lighting without the need for
an expensive control system.
With MultiMate™ technology, multiple two-wire devices are simply wired in parallel,
to provide two-way, three-way or multi-way dimming and switching.
SWITCHED ACTIVE, NEUTRAL
& EARTH TO LIGHT FIXTURES
MULTI-WAY DIMMING AND SWITCHING
WITH NO ADDITIONAL WIRING
MultiMate™ technology enables multiple LEDsmart+
two-wire devices to be wired in parallel to the same
lighting load, to provide two-way, three-way or
multi-way dimming and switching. When connected
in parallel LEDsmart+ dimmers allow dimming (and
switching) of connected lighting loads from multiple
locations without any additional wiring. No dedicated
remote switch wiring or ‘control bus’ is required.
™
™
PERFECT FOR NEW INSTALLATIONS
OR RETROFITS
ACTIVE, NEUTRAL
& EARTH
ACTIVE &
SWITCHED ACTIVE
ACTIVE &
SWITCHED ACTIVE
ACTIVE &
SWITCHED ACTIVE
With the ability to leverage existing wiring, dimmers
and switches powered by MultiMate™ technology are
suitable for new installations and retrofits.
NEUTRAL
EARTH
ACTIVE
SWITCHED
ACTIVE
SWITCHED
ACTIVE
ACTIVE
SWITCHED
ACTIVE
ACTIVE
MultiMate™ is a patented technology, developed
by Diginet Control Systems —
part of the Gerard Lighting group.
4
DIMMER/SWITCH WITH
MULTIMATE™ TECHNOLOGY
DIMMER/SWITCH WITH
MULTIMATE™ TECHNOLOGY
DIMMER/SWITCH WITH
MULTIMATE™ TECHNOLOGY
5
ADAPTOR KIT FOR LEDsmart+ ROTARY DIMMERS/SWITCHES
DIGITAL ROTARY DIMMER/SWITCH
™
With this handy kit LEDsmart+™ Rotary Dimmer can be quickly
and easily adapted to fit PDL, HPM and Clipsal wall plates.
WITH BUILT IN ON/OFF SWITCH & MULTI-WAY CONTROL
■■
Digital rotary dial for smooth and easy dimming
■■
Built-in tap on/off switch
■■
Fully programmable functions
A LEDsmart+™ Rotary Dimmer Module
■■
‘Quick flick’ dial feature to go to maximum or minimum lighting
B Small Knob
■■
Double tap to dim to minimum or maximum over 30 minutes
C Large Knob
■■
Illuminated halo via white LED indicators
D Light Ring: Small (Blue, Green, Orange)
■■
Large and small rotary knob options
E Light Ring: Large (Blue, Green, Orange)
■■
Interchangeable coloured halo rings (clear/blue/green/orange)
F Adaptor (Clear)
G Adaptor Cover (Clear)
H Adaptor Cover (White)
I Terminal Block
Options for easy customisation
LARGE & SMALL KNOBS
Customers can choose from large or small dimmer
knobs to suite their aesthetic and deliver single or
multi-dimmer control from one wall plate.
INTERCHANGEABLE COLOURED RINGS
Different coloured silicon rings allow the installer
to customise the Rotary Dimmer’s indicator ring
to suit the customer’s environment.
C
A
E
D
B
I
H
F
G
6
7
Traditional lighting control
set-up versus LEDsmart+
™
SWITCH
DIMMER
& SWITCH
SWITCH
DIMMER
& SWITCH
DIMMER
& SWITCH
DIMMER
& SWITCH
Before
After
To dim the lighting, the homeowner has to get out of bed and use the dimmer
by the entrance. From bed, all they can do is switch the lights on or off.
Now with Diginet LEDsmart+ the homeowner can dim as well as switch lights
from any wall plate location. And with no additional wiring or control systems,
the installation is now a whole lot easier.
8
™
9
Product functions
& specifications
COMPATIBLE LOAD TYPES
ROTARY
DIMMER/SWITCH
LOAD SYMBOL
LOAD TYPE
MAXIMUM LOAD
FUNCTIONS
Product code
Function
MMDM/RT-KIT
LED Lamps and Drivers
400W
Electronic Transformers
400W
DIMMER/SWITCH
Single-way control
d
Two-way control
d
Multi-way control
d
Indicator – white LED
d
Rotary dial
d
Integrated tap on/off
switch
d
Programmable minimum
d
Programmable maximum
d
Programmable kick-start
function
d
Programmable off-state
indicator
d
Kids bedroom mode —
double-tap to dim down
over 30 minutes
d
Wake up mode — double
tap to dim up over 30
minutes
d
Standard Iron-Core
Transformers
250W
Toroidal Iron-Core
Transformers
300W
Incandescent
350W
CFLs
400W
NOTES
Maximum permitted number of drivers is 400W
divided by driver name plate power rating. Due to
variety of LED lamp designs, maximum number
of LED lamps is further dependent on power —
factor result when connected to switch.
Due to variety of transformer designs,
maximum LV lighting load is also dependent
on transformer efficiency.
Due to variety of CFL designs, maximum
number is make/model dependant.
DIMENSIONS
Fits most New Zealand wall switch plate apertures
22mm
SPECIFICATIONS
Electrical connections
Nominal line voltage
10
220–240V AC
Line voltage frequency
50HZ NOMINAL (47–53HZ)
Load brightness range
0%–100% (TYPICAL FOR
LED LOADS)
Minimum load
1W
Maxmum load
400W
Mounting
24mm
two-wire (ACTIVE & LOAD,
NO NEUTRAL REQUIRED)
52mm
24mm
PDL, HPM and Clipsal
switch plates
11
Wiring for one-way or
two-way dimming & switching
Unlike conventional two-wire dimmers,
Diginet LEDsmart+ dimmers feature a built
™
NEW INSTALLATION OF ONE-WAY
DIMMING & SWITCHING
REPLACING EXISTING ONE-WAY SWITCH
WITH ONE-WAY DIMMING & SWITCHING
ONE-WAY DIMMING & SWITCHING
EXISTING ONE-WAY SWITCH
REPLACEMENT ONE-WAY DIMMING & SWITCHING
ACTIVE
NEUTRAL
ACTIVE
NEUTRAL
ACTIVE
NEUTRAL
in push on/push off switch. To provide both
dimming and on/off control. No separate
switch is required.
LAMP
LOAD
SWITCHED
ACTIVE
LAMP
LOAD
SWITCHED
ACTIVE
LAMP
LOAD
SWITCHED
ACTIVE
1
C
2
technology connect just like standard two-wire dimmers.
The Diginet LEDsmart+ range features Rotary Dimmer with a built in on/off switch.
Both dimming and on/off are accomplished with a single knob, with no separate on/off switch required.
NEW INSTALLATION OF TWO-WAY
DIMMING & SWITCHING
REPLACING EXISTING TWO-WAY SWITCH
WITH TWO-WAY DIMMING & SWITCHING
TWO-WAY DIMMING & SWITCHING
EXISTING TWO-WAY SWITCH
REPLACEMENT TWO-WAY DIMMING & SWITCHING
ACTIVE
NEUTRAL
ACTIVE
NEUTRAL
ACTIVE
NEUTRAL
Dimmers without built in switch powered by MultiMate™
™
LAMP
LOAD
LAMP
LOAD
1
C
2
Two-way switching and dimming with Diginet
LEDsmart+ dimmers.
™
12
STRAPPERS
SWITCHED
ACTIVE
2
LAMP
LOAD
SWITCHED
ACTIVE
C
1
STRAPPERS
When replacing existing two-way switching with two-way dimming/switching using Diginet LEDsmart+
dimmers, the existing two-way ‘strapper’ wires can be used. No new wiring is required.
™
13
Wiring for multi-way (three-way
or more) dimming & switching
To achieve multi-way dimming and
switching using Diginet LEDsmart+
™
NEW INSTALLATION OF MULTI-WAY
(THREE-WAY OR MORE) DIMMING & SWITCHING
REPLACING EXISTING MULTI-WAY SWITCH
WITH MULTI-WAY (THREE-WAY OR MORE) DIMMING & SWITCHING
THREE-WAY DIMMING & SWITCHING
EXISTING THREE-WAY SWITCH
REPLACEMENT THREE-WAY DIMMING & SWITCHING
ACTIVE
NEUTRAL
ACTIVE
NEUTRAL
ACTIVE
NEUTRAL
dimmers, the required number of
dimmers can be connected in parallel
to the same load. So if more than three
dimmers are required, they are simply
wired in parallel.
LAMP
LOAD
1
C
Required wiring for three-way dimming and switching
using Diginet LEDsmart+ dimmers. If more than
three dimmers are required, further dimmers are
simply wired in parallel.
™
2
LAMP
LOAD
SWITCHED
ACTIVE
C
STRAPPERS
2
14
SWITCHED
ACTIVE
LAMP
LOAD
1
EXISTING
STRAPPERS
Traditional three-way switching using two rocker switches and one intermediate switch, with strappers between the
switches. Rocker switches and intermediate switch are replaced with Diginet LEDsmart+ dimmers. The existing
strappers are used to connect the dimmers in parallel. No new wiring is required.
™
15
P: 0508 743 754 • F: 0508 743 755 • sales@gerardlighting.co.nz • www.gerardlighting.co.nz
© Gerard Lighting (NZ) Ltd. January 2017. All rights reserved.
Download PDF
Similar pages